Are you looking for the Best Guitar Pedal Patch Cables? If so, you’ve come to the right place.
Choosing the Best Guitar Pedal Patch Cables can be difficult as there are so many considerations, such as Pro Co Sound, Fender, D’Addario, Lava Cable, Mogami, EEEKit, ChromaLeaf. We have done a lot of research to find the top 20 Best Guitar Pedal Patch Cables available.
The average cost is $27.76. Sold comparable range in price from a low of $6.21 to a high of $93.60.
Based on the research we did, we think Ernie Ball Flat Ribbon Patch Cables Pedalboard Multi-Pack – Black is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Guitar Pedal Patch Cables (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
Reviewers Noted:
Good flexibility . Distortion . Durability . Sound quality
Features:
- Flat cable design makes cable routing easier than ever
- Low-profile connectors enable you to optimize your pedal layout
- Multiple shielding materials prevent interference, preserving your signal
Reviewers Noted:
Flexibility
Features:
- New red color
- Optimized flat cable and connector profile ideal for pedal boards
- 99.95% oxygen-free copper to resist corrosion
Reviewers Noted:
Good flexibility . Durable . Sound quality
Features:
- Featuring low-profile connectors and flat, ribbon-shaped jackets, these cables stay out of the way so you can place your pedals the way you want to
- Flat cable design makes cable routing easier than ever
- Low-profile connectors allow for optimized pedal layout
$9.70
4.8
Reviewers Noted:
Search . Good flexibility . Durable . Fit/security . Distortion
Features:
- Flat trs cables are extra flat and space-saving
- For connecting foot controllers and expression pedals
- Compact and super flat angled plugs flexible copper conductor 20 x 0.12 mm
Reviewers Noted:
Flexibility
Features:
- Optimized flat cable and connector profile ideal for pedal boards.
- Dual-shielded design for durability and low noise.
- Roadworthy construction.
Reviewers Noted:
Flexibility . Visual appeal
Features:
- (6 pairs) solderless 1/4" mono plugs (enough to make 6 cables)
- (12) feet of high-quality coaxial instrument cable
- (1) small phillips screwdriver
$6.21
4.9
Reviewers Noted:
Flexibility . Fit/security . Sound quality
Features:
- 23.62" long cable offers reliable patch connections within short range
- Copper conductor helps provide consistent data transfer rates
- Pvc insulation helps make this cable durable for prolonged use
$41.95
5.0
Reviewers Noted:
Distortion . Data transmission . Durability
Features:
- Nickel plating helps prevent corrosion and tarnishing
- The copper conductors offer efficient signal transmission to this cable
- Comes with pedal chain helps eliminate strand-interaction distortion
$6.99
4.9
Reviewers Noted:
Distortion . Data transmission
Features:
- 15 cm jack patch cable (unit)
- Ideal for connecting effects pedals and tuner
- Elbow jack with flat head to optimize space and connection
Reviewers Noted:
Search . Durable . Fits securely . Minimal distortion . Good flexibility
Features:
- Copper helps prevent signal distortion and interference
- Pvc jacket helps safeguard the cable from external damages
- This 6" cable helps establish a reliable connection between devices
Reviewers Noted:
Search . Good sound quality . Minimal distortion . Data transmission . Fit/security
Features:
- Diligently designed to let you customize your own right-angle plugs cable
- The 10' long cable can be cut in multiple pieces for added functionality
- Nickel-plating protects the plugs from corrosion and tarnish
Reviewers Noted:
Durable . Flexibility
Features:
- Right-angled connector design lets you connect it in compact spaces easily
- Pvc jacket helps protect the cable from over twisting and bending
- Multiple shielding materials help reduce signal distortions for smooth transmissions
$14.99
4.8
Reviewers Noted:
Minimal distortion . Durability . Sound quality
Features:
- Space-saving pedal patch cable with slimline pancake plugs
- Standard features
- High-quality patch cable for pedal connections
$7.90
4.9
Reviewers Noted:
Durability . Distortion
Features:
- Length: 5 cm
- Type-a connector: jack mono 6,3 mm male
- Type-b connector: jack mono 6,3 mm male
$9.71
4.5
Reviewers Noted:
Sound quality . Visual appeal
Features:
- Length: 30 cm
- Type-a connector: jack mono 6,3 mm male
- Type-b connector: jack mono 6,3 mm male
$19.99
4.1
Reviewers Noted:
Search . Lacks durability . Minimal distortion . Good sound quality . Visual appeal
Features:
- Vibrant easy color coded design.
- Angled 1/4 to 1/4 inch connections.
- Comes 8 to a pack.
$24.99
4.1
Reviewers Noted:
Search . Lacks durability . Minimal distortion . Good sound quality . Visual appeal
Features:
- Weight: .4 pounds.
- Cable/cord length: 8 feet.
- Connection
$17.79
5.0
Features:
- Feature: ggiant effect patch cable, made of oxygen-free copper conductor, can transmit pure, clear and noiseless signal to equipments. coaxial shielded cable has characteristics of excellent high frequency performance and…
Features:
- Make sure this fits by entering your model number.
- Standard 6.35mm nickle-plated plugs are durable for a long time use as the interior soldered joints are well protected inside of the injection plugs.
- The special flat outer pvc coat is very soft and flexible. it helps reduce the risk of cable jams and keep your pedal-board tidy and well organized.
Features:
- Solid and durable, good connection cable transmits high fidelity signal to the equipment. 21 awg high quality audio cable, 6" long for easy fit.
- Shielding provides noise rejection for quiet operation, ultra low capacitance which lends to a pure signal transparency.
- Two big core audio plug, in=out technology, molded ts 1/4" plugs are perfect for pedal boards.
1. Ernie Ball Flat Ribbon Patch Cables Pedalboard Multi-Pack – Black
Product Details:
Ernie ball flat ribbon patch cables feature a high-quality design made with superior components that are built to last. the flat cable design and low-profile connectors allow for optimized pedalboard layout and cable routing. multiple shielding materials preserve the signal with low handling noise, and the durable pvc jacket exterior ensures long-lasting performance. multi-pack includes: two 3 inch, four 6 inch, two 12 inch, and two 24 inch ribbon patch cables. flexibility align them, stack them, bend them, and twist them without compromising these cables integrity. whether you need to make a right turn on the pedal, maneuver around the pedal or underneath it, each little hole and crevice on your pedalboard can be utilized. metal housing these flat ribbon patch cables feature all-metal housing making your conductor and audio signal completely shielded from tip to tip. additional built-in strain relief for the metal connector, also makes it stronger and more robust than other flat patch cables on the market. ernie ball item no. p06224 buy your ernie ball flat ribbon patch cables from sam ash and receive the guaranteed lowest price.
Specifications:
| Connector Gender | Male-to-Male |
| Unit Count | 1 Count |
| Product Dimensions | 4.5 x 0.25 x 4.5 inches |
| Country of Origin | China |
| Color Name | Black |
Reviews:
I like the slim line nature of these but am not impressed with how they permanently glue the plugs to the wire., I would Not trust the nature of it being built into a one piece cable that cannot be taken apart to troubleshoot noise issues. The design is 70% there but the wire feels flimsy and the plugs cannot be replaced. Any issue and the cable is no good. If there is any issue with the plug, its no good. Id keep extras.Crystal
2. Ernie Ball Flat Ribbon Patch Cables Pedalboard -Pack (Red) Multi
Product Details:
Easily maneuver cables to fit your pedals exactly where you want them with our flat-cable design. multi-pack includes two 3-inch (7.62cm), four 6-inch (15.24cm), two 12-inch (0.30m), and two 24-inch (0.60m) red flat ribbon patch cables. low profile metal connectors and built-in strain relief provide sleek yet durable construction. 99.95 percent oxygen-free copper to resist corrosion. shielding materials preserve signal with low handling noise, and the durable pvc jacket exterior ensures long-lasting performance.
Specifications:
| Product Dimensions | 2.36 x 2.36 x 6.69 inches |
| Country of Origin | China |
| Is Discontinued By Manufacturer | No |
| Color Name | Red |
Reviews:
Good quality fittings and cable flexibilityPaul
Should cover any and all pedalboards out there!Luis
3. Ernie Ball Flat Ribbon 3" Patch Cable, 3-Pack
Product Details:
Ernie ball flat ribbon patch cables feature a high-quality design made with superior components that are built to last. the flat cable design and low-profile connectors allow for optimized pedalboard layout and cable routing. multiple shielding materials preserve the signal with low handling noise, and the durable pvc jacket exterior ensures long-lasting performance. align them, stack them, bend them, and twist them without compromising these cables integrity. whether you need to make a right turn on the pedal, maneuver around the pedal or underneath it, each little hole and crevice on your pedalboard can be utilized. our flat ribbon patch cables feature all-metal housing making your conductor and audio signal completely shielded from tip to tip. additional built-in strain relief for the metal connector, also makes it stronger and more robust than other flat patch cables on the market. the connector on our cables is half the size of most standard pancake cables and only protrudes a quarter of an inch out of the plug. easily nest them next to or on top of one another. our flat ribbon patch cables are available in more sizes than any other flat patch cable offered on the market. sizes range from an elusive 3 all the way to 24. additionally, our exclusive pedalboard multi-pack allows you the ability to wire your entire pedalboard without any soldering.
Specifications:
| Connector Type | 1/4" Flat |
| Unit Count | 3.0 Count |
| Product Dimensions | 5.5 x 4 x 0.5 inches |
| Country of Origin | China |
| Color Name | Black |
Reviews:
4. Rockboard Flat Patch Trs Cable 30 Black
Product Details:
Specifications:
| Weight | 0.5 lb |
Reviews:
5. Ernie Ball Flat Ribbon Patch Cables Pedalboard Multi-Pack – White
Product Details:
Easily maneuver cables to fit your pedals exactly where you want them with our flat-cable design. multi-pack includes two 3 inch (7.62cm), four 6 inch (15.24cm), two 12 inch (0.30m), and two 24 inch (0.60m) white flat ribbon patch cables. low profile metal connectors and built-in strain relief provide sleek yet durable construction. 99.95 percent oxygen-free copper to resist corrosion. shielding materials preserve signal with low handling noise, and the durable pvc jacket exterior ensures long-lasting performance.
Specifications:
Reviews:
These cables have super small plugs. Not only do they not stick out much but the width is also small so you can fit them in to just about anywhere. And the flat cables are easily twisted wherever you want them to go. My board looks way better now with them in there. Highly recommend!
Good quality fittings and cable flexibilityPaul
6. Solderless Guitar Pedal Patch Cable Kit 6 Pack To Make Custom Length Cables For Pedalboard
Product Details:
Tidy up your pedal board. perfect for loop selectors as well since the input and output jacks are often so close together. with compact right angle connectors, maximize that precious real estate on your pedalboard. customize the length of each cable to the length you need it to be. no soldering required. all tools and instructions needed are supplied in each kit.
Specifications:
| Is Discontinued By Manufacturer | No |
| Unit Count | 12 Foot |
Reviews:
These Jack's work very well.arbpickin
7. Rockboard Flat Patch Cable 60cm
Product Details:
Specifications:
| Operating Temperature | -15o C to +70° C |
| Cable Width | 7 mm |
| Cable Height | 3 mm |
| Plugs Width | 12.5 mm |
| Plugs Height | 7.5 mm |
Reviews:
The flat headed cables reduce clutter on a pedal board. I have a lot of pedals on my board because one of them is a big multieffect one (as you see in the photo). I needed to save space in between effect pedals and these cables did exactly that. With regular cables, I couldn't put all these on the board. Someone else mentioned that he/she won't buy any other cables. I feel the same.Kaz
These Cables are the best. they work great in tight spaces and are very reliable.Chuck
8. Mogami Pure Patch Pedal/effects Cables – 3 Pack 1 Ft.
Product Details:
Pure patch voltage control interconnects for modular synthesizer feature genuine mogami precision signal cable for complete signal integrity and consistency between patches. 100% coverage ultra high density spiral shield assures only the intended signal is received. sturdy, easy-to-grip plugs are triple nickel plated for extremely long life. assemblies are terminated and molded in japan for superb quality and long life.
Specifications:
| Conducting Material | Copper |
| Plating Material | Nickel |
| Number of Units | 3 |
| Plug Type | Low-profile |
Reviews:
I needed longer (than 8") cables I had to rearrange my pedal board. Mogami quality in thinline flexible cables.Dick and the Wannabes
9. Mxr 6" Patch Cable
Product Details:
This 6" patch cable is mxr-approved for clean, pure tone. featuring oxygen-free copper conductors and spiral shields to block unwanted interference, pvc outer jackets for flexibility and protection, and flat, low-profile right-angle ends to keep your pedalboard tight and tidy. trust mxr to patch you through.
Specifications:
| Mon-Fri | 9:30AM – 6:00PM EST |
| Sat | by Appointment |
| Sun | by Appointment |
Reviews:
Did exactly what i needed it to. Nice clean connection and very good quality. able to collect within 1 hour of orderingPeter M.
High quality. Simply what a pedalboard needs!!!Thomas E.
It does its job with no faultJohnny W.
10. Mxr Patch Cable 6" 3 Pack 3pdcp06
Product Details:
These mxr 3pdcp06 patch cables are a great way to connect up your pedalboard with a strong, noise-free signal. the low-profile right angle ends mean you can get your pedals close together if space on your board is at a premium, while the flexible and tough outer jacket makes these cables ideal for complicated signal chains. a 90% coverage ofc spiral shield blocks interference. although not the most exciting purchase, these mxr patch cables are some of the best available on the market.
Specifications:
| Length | 6" |
| Conductor Material | Copper |
| Jacket Material | PVC |
| Shield Pattern | Spiral |
Reviews:
Roughly $20 for a patch of 3 of this quality (Duh – It's MXR!) has completely made me finally settle on these as my designated patch cables for my board after giving up on another brand's "custom shop patch cable". Clean, flush to most pedals, can bend and warp to your liking for the most part (although most of mine crackle when I move them now), and let's you hear exactly what you want to hear with no added noise. Wasn't able to put 2 together on my boss RC-1 for double input but was able to sit them side by side on my MXR Carbon Copy Deluxe. The longevity isn't that compared to my other cables but those patch cables cost $25 each so until I can afford those, I'm sticking with these. These are the closest things to those as well signal wise. Have been recommending these to my friends. Need more sizes since it's so limited to 6" and 12" (the 12" can't be found on this site though).
I use this cable to connect my pedals in a pedalboard. Cables are sturdy and transmit signal quietly. The large size of the plug head prevents them from being used in applications where jacks are close together. The head would not fit between the input and/or output jacks and the wire from the power source to the pedal in several of my pedals.EC Bill
These Babies Generate No Noice WhatSoEver. I Use Them On My Board Exclusively. I have Tried Patch Cables Of Other Manufacturers And The Dunlop MXR Are Just As Good As The Ones Of The Much-Hyped And Expensive Cables Made By Mogami. The Dunlop MXR Patch Cables Are An Excellent Deal On AmericanMusical.Com – Two Pack Of Three Cables For $29 Only Minus: The Connectors Are a Bit Wide And Might Impede The Power Plug On Some Pedals. +++++fKKunst22
11. George L's Effects Pedal Cable Kit, Black
Product Details:
Overviewquality connections for your effects without soldering.george l's effects pedal cable kit lets you get rid of that motley collection of unmatched, crackly old patch cords strung between your effects pedals. george l's was voted #1 for sound clarity by guitar player magazine.features 10'of .155 cable 10 right-angle plugs it's time to redo your questionable old effects patch cords. this kit will let you do it right. order today.
Specifications:
| Plug Type | Right-angle |
| Number of Plugs | 10 |
| Cable Length | 10' |
| Plating Material | Nickel |
| Wire Gauge | 0.155 |
Reviews:
Overall this is just what i needed for my rig . you get what you pay for and i feel i got top quality.. And if you care about aesthetics of your rig will certainly look great. I never write reviews but after a bad experience with some other solderless wonders I think its time speak up. What could be better? this a cable that is easy to make ..looks great on your board and sounds clear. They look very well made.I think they will last a lifetime. That said ..I just got them and havent realy had enough time to test durability. What i can say is i was able to put them together and had my board up and running in a very short time. no problems at all with any of them. Just follow the instructions or go online theres a few realy good videos on you tube that will walk you through it..After i did one the others went together easy as pie.. As far as sound ..i dont think i have the best ear to be fair but i will say I can hear a difference in my rig.. Gone is the mess of cheap missmatched tone robbing cable mangle.. Im giving it a 6 only because i think for the price we should get 12 ends not 10. I have plenty of cable left over (what will i ever do with it)
I actually bought two of these kits to finish off a pedalboard and loop switcher. I watched an on-line video and got straight to it. The solderless connections are very easy to make and worked every time. This is in contrast to a D'Addario kit I got a couple of weeks previously, which is why I now own a cable tester . . . The George L cable is very thin, which is great when you are running 16 lines to a switcher. My only gripe is that I wish the ends were a little less bulky. They make it difficult to get pedals really close together to save room on the board. They are also a little pricy, when you think about 5 patch cables costing almost $20 each.John
Well engineered solderless plugs. Just remember to cut the ends off cleanly, de-crimp the cuts, so the cable looks round at the ends again. Place the cable end into right angle plug, push it in a bit, then bend the wire into the slot and screw the end camp down into the plug while holding the cable at 45 degree angle in slot. Lastly, place a rubber jacket provided over the screw end of the plug. This will somewhat secure the end screw to the plug. Then I recommend using a multi-meter to test for continuity at both ends of your new plug. That way… your certain that your plug connections are secure and not cutting too deep to the middle of the cable shorting it out. If you use these cables for a permanent pedal set-up they will work very well. However, I found that if I'm frequently moving pedals around on the board, pulling at the plugs and bending the cables, the connections may become loose over time, and you may have to re-build the plug connection. These cables take less space than Monster and Planet Waves effect cables. So if pedal board space is a premium, this is the best choice. Sound wise… there is more clarity in the top end. If you make them correctly, these cables are also very transparent and noise-free. Strangely enough… these cables sound much better than regular metal couplers and shortened soldered patch cords. These other cables must have slightly more resistance; hence, lesser sound quality. But, I highly recommend the George L cables…. It's night and day. Hope this helps.Nigel Moo Choy
12. Ernie Ball Flat Ribbon 12" Patch Cable, 3-Pack
Product Details:
Ernie ball flat ribbon patch cables feature a high-quality design made with superior components that are built to last. the flat cable design and low-profile connectors allow for optimized pedalboard layout and cable routing. multiple shielding materials preserve the signal with low handling noise, and the durable pvc jacket exterior ensures long-lasting performance. align them, stack them, bend them, and twist them without compromising these cables integrity. whether you need to make a right turn on the pedal, maneuver around the pedal or underneath it, each little hole and crevice on your pedalboard can be utilized. our flat ribbon patch cables feature all-metal housing making your conductor and audio signal completely shielded from tip to tip. additional built-in strain relief for the metal connector, also makes it stronger and more robust than other flat patch cables on the market. the connector on our cables is half the size of most standard pancake cables and only protrudes a quarter of an inch out of the plug. easily nest them next to or on top of one another. our flat ribbon patch cables are available in more sizes than any other flat patch cable offered on the market. sizes range from an elusive 3 all the way to 24. additionally, our exclusive pedalboard multi-pack allows you the ability to wire your entire pedalboard without any soldering.
Specifications:
| Number of Units | 3 |
| Jacket Material | PVC |
| Connector Type | Right-angled |
| Connector Size | 1/4" |
| Conductor Material | Copper |
Reviews:
The flat cables work perfect on my board – would buy again. A little pricey – but worth the stability.THX138
Flattest and most flexible cable I've come across.Brad S
13. Boss Space Saving Pancake Cable 8 In. Bpc-8
Product Details:
Space-saving pedal patch cable with slimline pancake plugs combining high-quality audio performance with a unique space-saving design, boss bpc patch cables help maximize real estate in any pedal setup. our custom-designed slimline pancake plugs fit on pedals and switchers with tight jack spacing, and feature 24k gold-plated contacts for corrosion-free operation. the oxygen-free copper center conductor keeps your tone intact, while heavy-duty braided copper shielding blocks noise and enhances durability. standard features high-quality patch cable for pedal connections custom 1/4-inch pancake plugs with a space-saving design (.6 x 1.02 x .3 in. /13.6 x 26 x 7.8 mm) ideal for boss 200 and 500 series pedals, switchers, and any pedal with tight jack spacing oxygen-free copper center conductor and braided shielding 24k gold-plated connectors three different lengths available lifetime guarantee a modern update on a classic design for decades, players and rig builders have relied on the standard 1/4-inch pancake plug to save space when connecting pedals. but they don’t always fit side-by-side on modern gear that’s designed for maximum jack connectivity in a minimum footprint, such as boss’s 200 and 500 series pedals and switchers. fitted with custom housings that offer a trimmed-down take on the classic pancake design, bpc cables provide a ready-made solution that lets you fit more pedals in a smaller space.
Specifications:
| Finish | Black |
| Year | 2010s |
Reviews:
I use it and wait works fineCraig
CANT BEAT THIS PRODUCT FOR THE MONEY! Low cost cable, that sounds as clean as a Mogami. Trust me.EVO
14. Rockboard Flat Patch Cable Gold 1.97 Inches
Product Details:
Designed to be extra flat and space-saving, they optimize pedalboard real-estate, featuring a slim rectangular body and extra thin angled plugs. the rockboard gold series flat patch cables lift our popular are flat patch cables onto a new level of quality. designed to be extra flat and space-saving, they optimize pedalboard real-estate, featuring a slim rectangular body and extra thin angled plugs. their contacts and plug housings are gold-plated. the cables feature a double shielding of braided cooper wire and aluminum foil that shields the flexible copper conductor core from high as well as low frequency interference. the gold series flat patch cables guarantee best signal quality and keep your setup tidy and neat looking.
Specifications:
| Weight | 0.5 lb |
Reviews:
I had been using right angle cords from several brands over the entire time I have been playing guitar. None have split the space between pedals by more than half. With it being flat, it makes things so such easier to have an even cleaner pedalboard. There are a number of companies making cables like this today, but I bought these as they were available…I don't regret my purchase in any way. I only wish they had a few more lengths. I have had the cords for a few months now and they sound excellent.Mike
High quality and works great. Built very rugged.BM
15. Rockboard Flat Patch Cable Sapphire 30cm
Product Details:
Even the best can get better! rockboard never stops striving for perfection and have developed a flat patch cable that is even better than their popular sapphire series. audiophile components make the little differences that not everybody might be able to hear – but those searching for perfect tone will appreciate all the more! here comes the sapphire series! these patch cables are even better shielded, have gold-plated contacts and with their unique look offer a breath of fresh air on your pedalboard. of course, all the features of the popular rockboard flat patch cables have been preserved compact connector housings, flat and flexible cables. however, the audio quality has been significantly improved so that the sound is being transmitted as unchanged as possible! features high-quality double-shielded flat patch cables with rectangular profile compact and super flat angled plugs gold-plated connectors metal plug housings flexible copper conductor (20 x 0.12 mm / 36 a…
Specifications:
| Weight | 0.5 lb |
Reviews:
Perfetto, comodo, di qualità e poco ingombrante.
I would recomend these to anyone who needs a cable end that takes little space.freemansguitars
The design of these cables are impossible to use with stereo pedals such as tc electronics flashback and hof. The heads of the cables are too large to connect the cables side by side. Ugh! That's horrible because they sound so good. Rockboard these cables suck as far as design goes!Josh
16. Musician's Gear 1/4 – 1/4 Patch Cable 8-Pack 17" Straight
Product Details:
Specifications:
| Cable/Cord Length | 9 feet |
| Connection Gender | Male-To-Male |
Reviews:
I play lead guitar in a worship band. I needed longer patch cables to handle my pedalboard looping system, and I didn't want to spring for the expensive, high quality ones just yet. Especially since I'm still figuring out the arrangement of my pedals (with the looping, they can be placed pretty much anywhere). But I also needed long patch cables with slim plug end that weren't big and bulky. These worked fine, and I've had no issues. I was skeptical going in, especially after reading some bad reviews, but they sound fine to me. I probably won't replace them until i need to. And since I'm using a looping system, the signal only goes through those cables if I specify them to, and when they do, they are accompanied by some sort of effect sound. So unless I activate them, my signal is from guitar to looper to amp, using long high quality cables. So, my point is, I probably wouldn't use these to daisy chain a lot of pedals, but for my purposes, its affordable and functional!Sammy the Gorilla
I bought the right angle version. These cables look and feel good. When they work, they sound good. For some applications they are fine, but it depends on your gear. Depending on the jack in a particular piece of equipment, it may or may not work. In some jacks, the plugs do not make good contact and are intermittent if they are rotated. This has nothing to do with the wiring. It has to do with the way the plug seats in the jack due to the shape of the tip of the plug and the length before it hits the stop. The shape of the metal part of the plug itself is slightly different than every other cable I have and the tip does not make good contact with the jacks in musical equipment because the shape of the tip deflects the plug to the wrong depth inside the jack, either too far or too short and rotating the plug just slightly will cause the signal to cut out. This happens with every end of all 8 cables and can be verified with a cable tester (rotate the plug and it shows the signal is intermittent). I was able to force the plug to work properly by shimming the end of the cable so that the plug just barely can't seat all the way and it works fine then, but I really shouldn't have to shim a cable to make it work. Even the cheapest, worst quality junk cable I own doesn't have this problem. Only these, and again, it's every plug on every cable. Due to the item being so inexpensive, it was not even worth returning it. I would recommend spending a little more money and getting anything else. It's not worth hours of your time dealing with a problem like this the way I did just to save a few dollars.Cousin Itt
17. Musician's Gear 1/4 – 1/4 Patch Cable 8-Pack (17") Angled
Product Details:
Specifications:
| Cable/Cord Length | 8 feet |
| Connection Gender | Male-To-Male |
Reviews:
I play lead guitar in a worship band. I needed longer patch cables to handle my pedalboard looping system, and I didn't want to spring for the expensive, high quality ones just yet. Especially since I'm still figuring out the arrangement of my pedals (with the looping, they can be placed pretty much anywhere). But I also needed long patch cables with slim plug end that weren't big and bulky. These worked fine, and I've had no issues. I was skeptical going in, especially after reading some bad reviews, but they sound fine to me. I probably won't replace them until i need to. And since I'm using a looping system, the signal only goes through those cables if I specify them to, and when they do, they are accompanied by some sort of effect sound. So unless I activate them, my signal is from guitar to looper to amp, using long high quality cables. So, my point is, I probably wouldn't use these to daisy chain a lot of pedals, but for my purposes, its affordable and functional!Sammy the Gorilla
I bought the right angle version. These cables look and feel good. When they work, they sound good. For some applications they are fine, but it depends on your gear. Depending on the jack in a particular piece of equipment, it may or may not work. In some jacks, the plugs do not make good contact and are intermittent if they are rotated. This has nothing to do with the wiring. It has to do with the way the plug seats in the jack due to the shape of the tip of the plug and the length before it hits the stop. The shape of the metal part of the plug itself is slightly different than every other cable I have and the tip does not make good contact with the jacks in musical equipment because the shape of the tip deflects the plug to the wrong depth inside the jack, either too far or too short and rotating the plug just slightly will cause the signal to cut out. This happens with every end of all 8 cables and can be verified with a cable tester (rotate the plug and it shows the signal is intermittent). I was able to force the plug to work properly by shimming the end of the cable so that the plug just barely can't seat all the way and it works fine then, but I really shouldn't have to shim a cable to make it work. Even the cheapest, worst quality junk cable I own doesn't have this problem. Only these, and again, it's every plug on every cable. Due to the item being so inexpensive, it was not even worth returning it. I would recommend spending a little more money and getting anything else. It's not worth hours of your time dealing with a problem like this the way I did just to save a few dollars.Cousin Itt
18. Ggiant Ac-18-3 Guitar Pedal Patch Cables 6 Inch Length Coxial Cable Pure Copper Shielding With 1/4 Inch Right Angle Connectors Effect Board Cables
Product Details:
Feature: ggiant effect patch cable, made of oxygen-free copper conductor, can transmit pure, clear and noiseless signal to equipments. coaxial shielded cable has characteristics of excellent high frequency performance and -interference ability. 1/4 inch standard right angle connectors, with high conducitivity and sensitivity, easy to plug for smooth operation. outer black and blue tweed woven jacket, not only keep wiring and neat, but also resistant to wear and bend, very strong and durable. perfect for pedal board cable replacement, can be used for clear signal transmission of guitar effect pedals or other musical equipments, such as mixing console and guitar amplifier. specification: brand: ggiant model: ac-18-3 quantity: 4pcs
Specifications:
| Packing List | 4 * Patch Cables |
Reviews:
Pues algo sencillo, pero durable y muy resistente, ampliamente recomendado.kast-9952
19. Rayzm Guitar Patch Cable, 6.35mm Angled Instrument Jumper Cable For Guitar/bass Effects Pedals, 5cm Pedal-Board Jumper Cables (6-Pack, Black)
Product Details:
Make sure this fits by entering your model number. the cable is slim, only 5cm long *3.6mm thick (rectangular cable). the dimensions of flat plugs: 3.0 *1.5*0.7cm (thickness). they are small and short to connect guitar/bass effect pedals. standard 6.35mm nickle-plated plugs are durable for a long time use as the interior soldered joints are well protected inside of the injection plugs. low impedance pure oxygen-free-copper 24awg conductor for a good level of conductivity and is wrapped in 4 layers of protective & isolating material to minimize the background noise and produce clear tone. the special flat outer pvc coat is very soft and flexible. it helps reduce the risk of cable jams and keep your pedal-board tidy and well organized.
Specifications:
Reviews:
Excellent quality and at a very good pricepauhollic-5
20. Donner 6" Patch Black 3 Pack Guitar Effect Pedal Cables
Product Details:
Solid and durable, good connection cable transmits high fidelity signal to the equipment. 21 awg high quality audio cable, 6" long for easy fit. shielding provides noise rejection for quiet operation, ultra low capacitance which lends to a pure signal transparency. two big core audio plug, in=out technology, molded ts 1/4" plugs are perfect for pedal boards. standard audio connector, solid outside casting, utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone. used for audio signal transmission of microphone, amplifier, mixing console and other equipment.
Specifications:
Reviews:
they work and arrived on time.Oklahoma
Love all Donner products! These worked great for my pedalboard project.Christopher
Related posts:
- Guitar Pedal Patch Bay For Sale (2024 Update)
- Best Guitar Overdrive Pedals (2024 Update)
- Guitar Pedal Order Noise Gate For Sale (2024 Update)
- Wireless Electric Guitar Cable For Sale (2024 Update)
- Best Guitar Pedal Boards (2024 Update)
- Best Electric Guitar Bridge (2024 Update)
- Monoprice Tube Guitar Amp Mods For Sale (2024 Update)
- Tonewoods For Electric Guitar For Sale (2023 Update)
- Guitar Hero Drum Pedal Wire Repair For Sale (2024 Update)
- Guitar Pedal Patch Cables For Sale (2024 Update)
