Are you looking for the Best 15 Inch Guitar Speaker? If so, you’ve come to the right place.
Choosing the Best 15 Inch Guitar Speaker can be difficult as there are so many considerations, such as JBL, Eminence, Celestion, Jensen Loudspeakers, Warehouse Guitar Speakers. We have done a lot of research to find the top 20 Best 15 Inch Guitar Speaker available.
The average cost is $440.94. Sold comparable range in price from a low of $45.00 to a high of $1489.99.
Based on the research we did, we think Eminence 15-in Musical Instrument Guitar Speaker is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best 15 Inch Guitar Speaker (20 Sellers)
Product Image | Product Name | Features | Check Price |
---|---|---|---|
|
|
||
|
|
||
|
|||
|
|
||
|
|
||
|
|||
|
|
||
|
|
||
|
|||
|
|||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
$229.99
5.0
Features:
- Warm, neutral tone allows you to tailor the sound to your needs
- Suitable for use in almost any enclosure, ideal as an easy replacement or upgrade
- High efficiency and power handling results in incredible output capability
$144.99
4.9
Features:
- Higher power, vintage guitar tone
- Big low-end, with a mellow, but singing top end
- Medium break-up modes
$154.99
4.7
Features:
- Power rating: 300 w
- Impedance: 8 ohm
- Frequency response: 47 hz to 3 khz response
Reviewers Noted:
Search . Lightweight . Good sound quality . Quality build . Minimal distortion
Features:
- 20khz coverage area: h 90 deg x v 50 deg (rotatable) components: lf.
- 15" cone, 3" voice coil, neodymium magnet hf.
- 2" voice coil, 1" throat compression driver, titanium diaphragm, neodymium magnet crossover: 1.
$399.99
4.7
Reviewers Noted:
Search . Good sound quality . Good bass . Quality build . Lightweight
Features:
- Speaker – active, full-range, 15″, 2000w
- 2000 w peak (1300 lf + 700 hf) 1000 w continuous rms (650 lf + 350 hf)
- 15-inch (381 mm) lf driver, 3-inch (76 mm) high-temperature voice coil
Features:
- Replace the damaged woofer in your speaker with this replacement part
- 46 hz to 4 khz operating frequency offers a high-quality audio experience
- 1000 w power output provides heavy bass for booming sound
$174.99
4.9
Features:
- Stamped steel basket
- Copper voice coil wound on a polyimide former
- Vented pole piece
$45.00
5.0
Features:
- The frequency response up to 5000 hz delivers an immersive sound experience
- The impedance of 16 ohms minimizes distortion for high-quality audio
- Sensitivity 95 db provides high and low pitch tones
$125.00
4.0
Features:
- Engineered with 4-ohms of impedance to offer a clear sound
- The 300 watts power delivers an immersive audio quality
- The 96 db sensitivity assists in minimizing the ambient noise
Features:
- The 100 db of sensitivity helps minimize noise distortion for an improved performance
- Designed with a paper cone to provide clear and dynamic sound quality
- Copper voice coil helps provide ruggedness and enhanced power control
$429.99$343.96
5.0
Reviewers Noted:
Sound quality
Features:
- Mounting depth [in, cm] 8-15/16, 22.6
- Continuous power handling [watts rms] 1100
- Rated impedance [ω] 2
$279.00
4.7
Reviewers Noted:
Good sound quality . Lightweight . Compact . Good bass . Quality build
Features:
- Groove on your favorite music with this tx2 series loudspeaker
- The 600 watts output offers improved sound quality
- Its redesigned horn helps provide enhanced audio coverage
Reviewers Noted:
Search . Good sound quality . Lightweight . Quality build . Easy to use
Features:
- The 2-way speakers give smooth and precise production of sound to deliver an ultimate audio experience
- Experience body-shaking levels without any room-vibrating reverb or excessive heat output with 250 w rms power
- Hear every detail crisp and clear with a frequency response of 56 hz-18 khz
Reviewers Noted:
Search . Good sound quality . Lightweight . Quality build . Easy to use
Features:
- For live stage, theater, dj setups
- Built-in bluetooth receiver
- Frequency response: 55 hz to 18 khz
Reviewers Noted:
Good sound quality . Easy to use . Quality build . Good bass . Lightweight
Features:
- One 15 inch premium, 2 3/8 inch voice coil woofer
- 400 watts program, 800 watts peak
- Heavy-duty crossover
$579.99
4.8
Reviewers Noted:
Search . Good sound quality . Quality build . Easy to use . Heavy
Features:
- Excellent condition (single owner church and taken fantastic care of. just a few very light marks and small scratches, overall in very good shape).
- Works perfectly, no functional issues.
- 14 day returns<.
Reviewers Noted:
Sound quality . Build quality . Weight . Bass performance
Features:
- Dual-angle pole socket for applications requiring tripod mounting
- Heavy duty 16 gauge protective screen backed steel grille
- Tough duraflex enclosure finish
Reviewers Noted:
Search . Good sound quality . Good bass . Quality build . Weight
Features:
- Jbl 2414h-c 25 mm (1 in) polymer diaphragm compression driver improves high frequency performance as well as system reliability.
- The advanced network topology crossover design shapes frequency response and delivers coherent summation in the crossover region.
- High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
Reviewers Noted:
Good bass . Lightweight . Sound quality . Build quality
Features:
- Dual 15" two-way design.
- 90° x 50° coverage.
- Heavy duty 16 gauge protective screen backed steel grille.
Reviewers Noted:
Good sound quality . Powerful . Quality build . Good reception . Performs well
Features:
- New for 2017!
- Injection-molded polypropylene cone.
- Patented corner ribs minimize distortion.
1. Eminence 15-In Musical Instrument Guitar Speaker
Product Details:
The warmth of hemp meets the power and responsiveness of this neo eminence wheelhouse 200 in this versatile 15 inch version of the eminence wheelhouse 150. touch-sensitive and balanced, the wheelhouse delivers warm, smooth tone throughout the entire spectrum, allowing you to utilize your amp controls to shape your sound. it handles pedals and amp eq with ease. go from country to fusion to blues and make it sound like it's right in your wheelhouse.
Specifications:
Nominal Basket Diameter | 15", 3.81 mm |
Nominal Impedance | 8 O |
Watts | 200 W |
Resonance | 51 Hz |
Usable Frequency Range | 60 Hz – 3.5 kHz |
Sensitivity | 101.5 dB |
Magnet Weight | 11 oz. |
Gap Height | 0.375", 9.53 mm |
Voice Coil Diameter | 2.5", 64 mm |
Resonant Frequency (fs) | 51 Hz |
DC Resistance (Re) | 7.49 O |
Coil Inductance (Le) | 0.46m H |
Mechanical Q (Qms) | 16.85 |
Electromagnetic Q (Qes) | 0.46 |
Total Q (Qts) | 0.45 |
Compliance Equivalent Volume (Vas) | 182.7 liters / 6.45 cu.ft. |
Peak Diaphragm Displacement Volume (Vd) | 175.76 cc |
Mechanical Compliance of Suspension (Cms) | 0.21 mm/N |
BL Product (BL) | 15.58 TM |
Diaphragm Mass Inc. Airload (MMs) | 47 grams |
Efficiency Bandwidth Product (EBP) | 111 |
Maximum Linear Excursion (Xmax) | 2.2 mm |
Surface Area of Cone (Sd) | 791.7 cm2 |
Sealed | Acceptable |
Vented | Acceptable |
Driver Volume Displaced | 0.128 cu.ft. / 3.62 liters |
Overall Diameter | 15.16", 385.1 mm |
Baffle Hole Diameter | 13.87", 352.3 mm |
Front Sealing Gasket | Yes |
Rear Sealing Gasket | Yes |
Mounting Holes Diameter | 0.25", 6.35mm |
Mounting Holes BCD | 14.56", 369.8mm |
Net Weight | 8.2 lbs, 3.72 kg |
Coil Construction | Edge-wound aluminum |
Coil Former | Polyimide former |
Magnet Composition | Neodymium |
Core Details | Vented core |
Basket Materials | Pressed steel |
Cone Composition | Full molded paper |
Cone Edge Composition | Paper cone edge |
Dust Cap Composition | Treated paper |
Manufacturer Part Number (MPN) | WHEEL HOUSE 200 |
Reviews:
Fat like a pulled pork sandwichDon
2. Eminence Legend 1518 15" 8-Ohms Guitar Speaker
Product Details:
Eminence legend 1518 15" guitar speaker, 150 watts at 8 ohms the eminence legend 1518 15" guitar speaker gives you a vintage american tone with a big low end but brilliant highs. the aggressive top end on the 150w legend 1518 makes this speaker perfect for jazz, blues, and country. finally you can have a defined sound that sparkles but isn't too harsh. add this speaker to your guitar rig to give you the definition and distinction you've been looking for. the eminence legend 1518 15" guitar speaker is the perfect speaker to craft your signature sound! listing and template services provided by inkfrog open.
Specifications:
Nominal Basket Diameter | 15", 381 mm |
Nominal Impedance | 8 Ω |
Watts | 150 W |
Resonance | 82 Hz |
Usable Frequency Range | 60 Hz – 4 kHz |
Sensitivity | 103.4 dB |
Magnet Weight | 59 oz. |
Gap Height | 0.312", 7.9 mm |
Voice Coil Diameter | 2", 51 mm |
Coil Construction | Copper voice coil |
Coil Former | Polyimide former |
Magnet Composition | Ferrite magnet |
Core Details | Non-vented core |
Basket Materials | Pressed steel basket |
Cone Composition | Paper cone |
Cone Edge Composition | Paper cone edge |
Dust Cap Composition | Zurette dust cap |
Reviews:
Overall: It is smooth sounding. It is very bassy sounding to me by itself. I have it paired with a 1275 and the two together sound better than either by itself. They cancel out each others weaknesses and sound even more mellow. I don't know how to describe the sound very well. (I like Eminence speakers because they say Designed and assembled in the US.)Tyrell
This speaker sounds great. That is why it is a legend.Great ,warm bottom end.Good mids and crisp highs.It does it all.Put in an old Peavey cab for a legendary Rockability artist, and he loved it.He wanted the sound like he had in the fifties when he was singing and playing all over the country.Before Carl Perkins.This speaker does the job. Thank you.woodwill909
The Eminence 1518 15" speaker for guitar amplifiers is a great performer and on nobody's radar. Big, full sound it's very good alone and can be a revelation when used in conjuction with brighter 10s and 12s. For reference it has a somewhat similar tonality to a Canabis Rex but bigger and stronger. You will not have to ever worry about pushing this guy too hard. It can take whatever amp you've got.cdawg22
3. Eminence Legend Cb158 15" Bass Guitar Speaker 8-Ohms
Product Details:
This eminence legend is in great shape and sounds fantastic. it has been well cared for and never abused. it s lived in a custom made 2×15 cab with a padded cover and only had about 50 watts through it. over all the speaker is in near mint condition and functions perfectly. foam can be added to the back lip if you intend to front load it, just send me a message after purchasing. note, i have 2 speakers available. they are identical aside from the sticker.
Specifications:
Nominal Basket Diameter | 15 inch, 381mm |
Nominal Impedance | 8 ohms |
Resonance | 34Hz |
Usable Frequency Range | 47Hz – 3kHz |
Sensitivity | 98dB |
Magnet Weight | 80 oz. |
Gap Height | 0.37 inches, 9.53mm |
Voice Coil Diameter | 2.5", 63.5mm |
Resonant Frequency (fs) | 34Hz |
DC Resistance (Re) | 6.15 |
Coil Inductance (Le) | 0.33mH |
Mechanical Q (Qms) | 5.9 |
Electromagnetic Q (Qes) | 0.36 |
Total Q (Qts) | 0.34 |
Compliance Equivalent Volume (Vas) | 336 liters / 11.9 cu.ft. |
Peak Diaphragm Displacement Volume (Vd) | 411cc |
Mechanical Compliance of Suspension (Cms) | 0.31mm/N |
BL Product (BL) | 16 TM |
Diaphragm Mass Inc. Airload (MMs) | 70 grams |
Efficiency Bandwidth Product (EBP) | 95 |
Maximum Linear Excursion (Xmax) | 4.8mm |
Surface Area of Cone (Sd) | 856.3 cm2 |
Maximum Mechanical Limit (Xlim) | 9.5mm |
Sealed | 54-65 ltr/1.9-2.3 cu. ft. |
Vented | 54-159 ltr/1.9-5.6 cu. ft. |
Driver Volume Displaced | 239 cu.in. / 3.92 liters |
Overall Diameter | 15.21 inches, 386.4mm |
Baffle Hole Diameter | 14 inches, 355.3mm |
Front Sealing Gasket | Fitted as standard |
Rear Sealing Gasket | Fitted as standard |
Mounting Holes Diameter | 0.28 inches, 7.1mm |
Mounting Holes BCD | 14.56 inch, 369.9mm |
Coil Construction | Copper voice coil |
Coil Former | Polyimide former |
Magnet Composition | Ferrite magnet |
Core Details | Vented and extended core |
Basket Materials | Die-cast aluminum basket |
Cone Composition | Paper Cone |
Cone Edge Composition | Cloth cone edge |
Dust Cap Composition | Solid composition paper dust cap |
Reviews:
I have a Rumble 1 x 15 cabinet. I wanted to upgrade from the Eminence-Made for Fender speaker. At the advise of an Eminence Tech I purchased the CB158. It sounds great! Clear deep tones I plan on buying a second Rumble 1 x 15 cabinet and I'll upgrade that one also! The sale price made it a great value!Chuck
You can experience quite a bit of satisfaction when a product you paid a fair amount of money for just plain works. And boy does this speaker work. The solid bass tones that come out of this baby has brought my 80s something Fender Bassman Compact back to life. I was happy all the bolt holes lined up with the pre drilled holes of the amp. The only little drawback is that it has made my amp heavier. Not a bad trade off for the quality sound that this speaker delivers.Darren
I refurbished an Ampeg 115hp bass cabinet and installed a CB158 15". The speaker provides tremendous frequency response, tight solid bottom end with crisp clean highs. I no longer use the horn in the cabinet…there is no need. I highly recommend this speaker to get the most out of a bass rig. It also pairs very well with my Ampeg PF210HE.Francis L
4. Yamaha Dzr15 15-Inch Powered Speaker
Product Details:
The yamaha dzr15 is a 2-way powered speaker with a 15” woofer. the dzr15 is perfect for djs, live musicians and other mobile performers who appreciate deep bass, pure vocals and crisp highs. the yamaha dzr15 active speaker produces distortion-free audio, even when pushed to its limits. thanks to its 2,000w class-d amplification and custom-designed drivers, the dzr15 has a frequency response down to 34hz. its rotatable horn lets you position the speaker horizontally and still achieve proper high-frequency dispersion. yamaha’s 96k hz dsp processor focuses the speaker’s power into high-resolution sound. advanced fir-x tuning technology delivers a smooth frequency response. the result is stunning clarity from the dzr15 speaker without phase distortion. an onboard lcd screen lets you easily navigate the dsp functions. store up to eight presets to save your custom adjustments. saved settings can easily transferred to a usb flash drive. the dzr15 powered speaker features d-contour, which is an intelligent multi-band compressor. it ensures your dzr15’s sound stays consistent and clear at any volume. the d-contour technology constantly monitors the output of multiple frequency bands. then it applies the ideal eq adjustments for band. there are two d-contour modes: foh/main and monitor. these settings give you more detailed tuning of your sound, depending on your system’s setup. dsp protection built into the yamaha dzr15 extends the life of its components. it also maximizes output. yamaha’s dsp monitors the status of the power supply, power amplifiers, transducers and signal levels. this allows the dsp to protect each component of the dzr15 and maximize performance.
Specifications:
Configuration | Active 2-Way |
Enclosure Type | Bass-Reflex Loudspeaker |
Total Power Capacity | 2000 W Peak 950 W RMS |
Amplifier Class | Class-D |
HF Voice Coil | 2" / 50.8 mm |
LF Driver | 1 x 15" / 381 mm Woofer |
LF Voice Coil | 3" / 76.2 mm |
Magnet | HF- Neodymium LF- Neodymium |
Frequency Range | 34 Hz to 20 kHz -10 dB |
Maximum SPL | 139 dB |
Max Input Level | Line Input- +24 dBu |
I/O Impedance | Input- 20 Kilohms |
Audio I/O | 2 x Combo XLR-1/4" TRS Input 2 x XLR 3-Pin Output |
USB | 1 x USB Type-A (External Memory, Host Connection) |
Crossover | 1.7 kHz |
Maximum Sampling Rate | 96 kHz |
AC Input Power | Universal- 100 to 240 VAC, 50 / 60 Hz |
AC Power Connector | 1 x IEC (Locking) |
Power Consumption | 45 W (Idle) 150 W (1/8 Power) |
Handles | 1 x Each Side |
Cooling | Fan (Variable Speed) |
Construction Material | Plywood |
Dimensions | 17.7 x 30 x 18.1" / 450 x 761 x 460 mm |
Box Dimensions (LxWxH) | 35 x 22 x 21.75" |
Reviews:
I was looking for a portable powered PA speaker to run through a mixing console so I could blend Backing tracks vocals and guitar through. When I was discussing what I was looking for with my Sales Engineer(Matt LaMarche) he said there wasn't much sound difference between the DBR10 and DBR12.. So I went with the 10's and couldn't be happier. First off I've been running my Line6 HD500X through an old school Pioneer Head Unit that Pushes Twin Akia Speakers which has a total power of 500W. The Yamaha Speakers take the sound and brings clarity with the FRFR, I set the gain to 0db on the speaker and OH the glorious stereo guitar effect sounds I've been missing when I pair two of the DBR10's together. The DBR10's have the option to be pole mounted(Which I would suggest doing) or as floor monitors. I really like the simplicity of the back panel and appreciate the lack of Wiz Bang or LCD gadgetry. Are they perfect.. Nope.. But Dang Close.. To make them perfect add a USB connection to the back for Phone connectivity with stereo linking when you connect two together. Why not bluetooth? Well Bluetooth doesn't charge your phone and sometimes Bluetooth drops out.
For the price, this speaker is a great choice. The DBR10 has very bright & clear mid range when using the FOH/main DSP setting. This setting also has has some low end boost. I would recommend using the DBR10 paired with a Yamaha sub bass for a complete full range system The speaker cab is plastic and not as robust as DXR range. However, this is not a deal breaker. In reality it is lightweight , looks tidy and a low cost cover will stop scratches. I bought 6 of the DBR10 to use for background music at weddings. They do the job and more . The high pass filters were great for this purpose as it reduces unwanted low rumble and they performed brilliantly for vocal mic when used for speaches / ceremony. Would I recommend ? Yes . DBR10 is perfect for people wanting quality clear sound but working within a budget .paul l.
I currently own a set of Mackie SRM 350 V3's, and I'm very happy with them. I'm a dj and I'm trying to downsize my system and make it more compact, but loud and not compromise the sound. So I've been using my Mackie's with my Yamaha DXS12 MKII sub, and it works great, but the spl's on the Mackie's we're insufficient for some of my larger venues. I decided to go with the DBR10's cause I've noticed the specs for the frequency response were close enough, but what caught my attention was the 129db max spl! So I bought a pair, great job on shipping time B&H, and once I hooked them up and began to crank them, I was blown away by the sound quality, but especially how loud and transparent they sounded! Very pristine and accurate sound like my RCF's, but not at RCF prices, lol! I've been djing 40 years and I've been thru many brands of speakers, these Yamaha DBR10's are now my favorite! Compact, loud, but very clear! They can be used without a sub for small venues and rock them! With my Yamaha sub, forget about it! They are a perfect match, and they all fit in my trunk! I highly recommend them!Javier
5. Alto Professional Ts315 15" 2-Way Powered Loudspeaker
Product Details:
With 1,000 watts of continuous (2,000w peak) class-d amplification, this 2-way, full-range powered loudspeaker features redesigned transducers in a lightweight, portable enclosure. the ts315 delivers uncompromising professional audio for a wide variety of applications, including mobile performing and permanent installations. this active cabinet's tight, low-frequency reproduction is handled by a 15" driver with a 3" high-temperature voice coil. a 1.4" tweeter with a neodymium magnet and precision waveguide provide crystal-clear high-frequency reproduction. thanks to its large lf driver and efficient class-d bi-amplification, the ts315 delivers plenty of low-end punch, making it an ideal choice for djs, live bands and other performers on the go. integrated m6 suspension points, built-in pole socket and a wedged cabinet design give you the flexibility to mount the ts312 in a variety of ways. dual xlr combo mic/line inputs, independent level controls and an xlr link output deliver i/o and setup versatility. get your sound dialed in perfectly with an onboard 2-channel mixer and contour eq switch. whether you're using the ts315 as a monitor or a main, you can count on clean, accurate full-range audio and reliable performance, gig after gig. thanks to its lightweight, compact design, transporting and setting up this active pa speaker is a snap, so you can save your energy for performing—not hauling heavy equipment.
Specifications:
Product Type | Speaker – for PA system |
Audio Mixer | 2 channels |
Protection | Overload protection, thermal protection |
Enclosure Material | Injection molded polypropylene |
Design Features | Trapezoidal design, built-in carrying handles |
Speaker Type | 2-way – active |
Continuous Power | 1000 Watt |
Peak Power | 2000 Watt |
Frequency Response | 43 – 22000 Hz |
Frequency Response (-3dB) | 50 – 20000 Hz |
Max Output Level (Max SPL) | 134 dB |
Crossover Frequency | 2000Hz |
Connection Options | Bi-amping |
Amplifier | Integrated |
Coverage | 90° x 60° |
Recommended Placing | Wall-mountable, floor-standing, pole mount, flyable |
Controls | Power on/off, volume |
Speaker Details | Speaker – 1000 Watt – 2-way – active |
Driver Details | Speaker: woofer driver – 15" Speaker: tweeter driver – 1.4" – neodymium – Wave Guide |
Connector Type | 2 x balanced audio input (XLR / phone stereo 6.3 mm) Balanced audio output (XLR) |
Power Source | Integrated power supply |
Voltage Required | AC 120/230 V (50/60 Hz) |
Width | 16.6 in |
Depth | 15.4 in |
Height | 25.7 in |
Weight | 41.45 lbs |
Reviews:
As a dj I needed these speakers after my Mackie SRM 450's started getting fuzzy after 10 years of putting them through the ringer. Actually one is still perfect but one distorts when I turn it up. Anyway. I bought these to replace the Mackie's They sound great overall. Very open sound. Doesn't sound like it's coming from a speaker. Mid's and High's are perfect. Bass is tight and clear but not pronounced. I ran the bass all the way up and they still didn't push as much as the 450's with a 12" and these are 15". Keep in mind the old 450's are only like 450 watts. These are 1000 with 2000 peak. Overall though. I paid twice as much for the other and these are very very close at half the price. I would recommend these. Always have to remember most people don't care about the sound as much as the energy and volume. Which is a balancing act as well.DJ :Todd
For the money, you won't find a better speaker. I tried these and the Mackie Thumps…hands down, these sounded significantly better. The high end and mids really come through well. The bass is good, but you'll most likely still want a sub with these. That said, these are still able to perform really well. These are truly 1000W RMS…they are LOUD! I run them about 1/2 with a room of around 150 people with no problems at all. The vocals, guitars and keys come through very nicely. I back off the low EQ of the kick drum just a bit, and they hold up well! Overall, these speakers are great for a variety of different settings. Get a pair now before they go up in price!Shane
Having done a lot of research and finding myself unable to afford Yamaha DXR range, I can safely say that these are an excellent cheaper option for this who want quality and power in a full range compact PA speaker. It's really very good and hasn't disappointed. It's not one to be left to other people to look after though as the combined gains for music and mic mean that one could easily blow the tops if you don't understand what you're doing with the gains. Personally not an issue for me, but maybe not ideal for use as unattended hire speakers. Other than that, no qualms at all about recommending this speaker. I'm pairing them with an Alto sub and the sound is really quite excellent.marttrish
6. Eminence Kappa Pro-15a 15" Replacement Speaker
Product Details:
Specifications:
Size | One size |
Output | 1000 W |
Resistance | 8 ohms |
Material | Aluminum |
Frequency Response | 46 Hz – 4 kHz |
Reviews:
Rec'd from MF by free shipping in 2 days. Factory sealed packaging. Installed as a replacement in an SWR Son of Bertha 15" cabinet. Took less than 10 minutes, fit like a glove. This speaker is as close to the original SWR factory specs as I could find, except higher wattage and higher sensitivity rating. Driven with a GK MB800, EQ'd flat at 1/2 output it performed effortlessly. Round, rich and warm tone. Precise and articulate. Made my 8 year old cab brand new again.3rdBass
A friend and I have a high-wattage sound system located in his heated pole barn. We didn't spend a lot, but we like the results we're getting. We put the 4018LFs in two Peavey 118 boxes, to which we added some fiber-fill, but did no other mods. We drive them with a Behringer NU6000 at 4-Ohms, bridged mode. It's plenty of power. We're using the sub output from a Behringer Ultragraph Pro FBQ1502HD, crossed over at 100Hz. We play LPs, CDs, and SACDs. The 4018LFs sound great! I hope this helps you decide.Michael
I have a very old pair of Peavey TF115 loudspeakers driven by a Peavey 1.3K (400W per channel at 8 ohms) that I use both as a PA and stereo guitar amp. Not the greatest stuff, but it gets the job done and has done so daily since the 90's until I recently overdrove the horn and tore a nice gash in my woofer being careless with my tools. My first thought was to replace them, but I decided to rebuild one before dropping big bucks on new cabs. For starters, the magnet on this beast is twice the weight and size of the Peavey and my first reaction was — UH OH — I'm gonna need way more power! However to my suprise, I am pleased to say this thing rocks and really packs a thumping punch! Running the old versus the new side by is night and day. If you want a deep clean bottom end punch that is crisp and sharp, this will get the job done. The sound is very clear and the lows are extremely clean. There is no doubt that this woofer is handling the power with ease and can take much more abuse than her old twin sister. I have no other option but to rebuild the second unit now. Extremely pleased with he value of this purchase…Just make sure you have enough power to drive it or it may not budge!Hitman
7. Eminence Legend Ca154 15" Bass Speaker
Product Details:
Specifications:
Weight | 15 lb |
Reviews:
The Eminence Legend CA154 was called on to replace another "legend," the 15" factory-installed Jensen bass speaker found inside the Leslie Model 21H and its iconic kin. Rated at just 20W, the aging and under-powered Jensen's best days were long behind it. The Eminence has proven itself to be an able and affordable replacement. It's being fed nearly all of those rated 300W from an external amplifier. And it handles the job without a hint of a whimper, producing a deep, clean, window-rattling bass even when dialed to 11 and beyond. For the money, maybe the best speaker out there.Gary
It’s awesome, converted my Ampeg SVT 1 15 8 ohm to a 4 ohm. Always great service from Parts Express
Bought two of the Eminence Legend CA-154 15" Bass Guitar Speakers to replace the originals in my pair of Traynor BLOC-80B bass amps and they sound great. These replacements have the correct specs with twice the signal carrying capacity of the original speakers. One of my original speaker died after may years of great bass sound.Stoney
8. Celestion Eight 15 Guitar Speaker – 16 Ohm
Product Details:
The celestion eight 15 speaker is ideal for upgrading your bedroom blaster with authentic british tone. with well-balanced mids and highs complementing a surprisingly meaty bottom end, its just about the biggest sounding 8" loudspeaker weve ever heard. the eight 15 speaker is also available in 4 making it ready, willing and able to blast new life into junior combos like the fender champ, bringing extra depth, girth and punch to your tone. supersize the performance of your amp with the sonic might of the eight 15, the fattest sounding 8" speaker around.
Specifications:
Frequency Range | 100-5000 Hz |
Sensitivity | 95 dB |
impedance | 16 ohm |
Weight | 2.2 lbs |
Power Rating | 15 W |
Reviews:
Upgraded two Orange PPC108 cabinets to these speakers to use with my Micro Terror head. Speakers have better high end definition than the stock speakers (Voice of the World) in the PPC108. There is no speaker distortion with this setup which I would sometimes get out of the stock speakers. Excellent upgrade for the price. 16Ohm load allowed me to tune the setup to allow 2 speakers with my Micro Terror (8 Ohm minimum load version).Aaron
9. Celestion Bl15-300x 15" 300w Bass Guitar Speaker 4 Ohm
Product Details:
Not every player wants a super-clean, high-fidelity bass sound. characterised by an extended low end and greater linear excursion, green label speakers push out every note with a rich, warm tone and a powerful low-end thump. green label speakers are primed for high-powered rock performances, where a full-bodied, warm, defined tone is essential.
Specifications:
Sensitivity | 96 dB |
Frequency Range | 42 Hz – 3.5 kHz |
Depth | 6.4" |
Weight | 10.6 lbs |
Impedance | 4 ohm |
Reviews:
This is a replacement for a bass combo amplifier and it sounds better than the original. I was going to swap this out when the original came back from reconing, but will keep it as is and use the original in an extension cabinet.Pushes the low notes without overtones and cuts through the room. Very reasonable price for the quality.Sal
Arrived quickly and packaged well. Easy install and performs just what I need. I'll probably order another!JT
10. Eminence Delta 15a 15" Speaker
Product Details:
Eminence delta-15a 15" driver 8 ohm the eminence delta-15a 15" speaker is recommended for professional audio as a midbass or stage monitor woofer in sealed enclosures. also suitable as a midbass or woofer in vented pa enclosures, as well as musical instrument systems. model # delta15a features: kapton coil former polyamide-imide coated aluminum voice coil ferrite magnet vented pole piece pressed steel basket paper cone cloth accordion surround power handling (rms) 400 watts power handling (max) 800 watts impedance 8 ohms frequency response 48 to 4,000 hz sensitivity 100 db 1w/1m voice coil diameter 2. 5" magnet weight 56 ounce item dimensions: 17. 9" l x 16. 7" w x 6. 4" h.
Specifications:
Product Type | Speaker driver |
Speaker Type | Passive |
Continuous Power | 400 Watt |
Peak Power | 800 Watt |
Frequency Response | 48 – 4000 Hz |
Nominal Impedance | 8 Ohm |
Sensitivity | 100 dB |
Diaphragm Type | Paper cone |
Magnet Type | Ferrite |
Speakers Included | 1 x speaker driver – 15" – 400 Watt – 48 – 4000 Hz – 8 Ohm – wired |
Driver Details | Speaker driver: mid-bass driver – 15" – ferrite – paper |
Diameter | 15.1 in |
Weight | 12.35 lbs |
Diameter | 13.9 in |
Depth | 6.1 in |
Reviews:
I put this into a 1×15 cab powered by a Carvin head and it just RUMBLES. Eminence quality and sound. Good buy.Spookytoof
I load too many speakers. I believe in Eminence Delta series for several applications. I currently deploy Delta LFA for low frequency support, Delta Pro series for their range and power for PA support, and Delta A for monitors and smaller venue mains. They are reliably consistent and handle power and abusive cartage. Good useable range for any application.
11. Kicker Compq 15" Dual-Voice-Coil 2-Ohm Subwoofer
Product Details:
Kicker compq15 15-inch (38cm) subwoofer, dual voice coil 2-ohmq-class performance the compq certainly produces on every level. it gives the listener everything on the wish list, including high-caliber bass for whatever the music genre, huge voice coils for tremendous power handling and prodigious magnets for high spl. like its brand partner l7, which is a 2015 ces innovation award recipient, compqs motor efficiency and structure is unrivaled, boasting computer-optimized, oversized voice coils for the most power handling (rms and peak) ever from a round kicker subwoofer. technologically advanced immense magnets administer the most accurate voice-coil control, using long, low-carbon extended poles for the greatest coil excursion and power handling. this solid, non-vented pole piece provides high mass for optimal cooling during continued use. built for power at such high excursion, the components are engineered to perform under such stress. large-diameter, progressive-roll spiders maintain precise control during long coil throw. heavy-duty ribbon-wire speaker leads intertwine with the spider for the best reliability. the die-cast aluminum alloy basket adds to the efficient motor structure and superior alignment while protecting the inner workings. kicker quality the injection-molded round cone delivers on targeted, accurate response, and the stitched, large-roll santoprene surround expands for max control at high excursion. it's in the details installers will rely upon high-capacity, dual voice-coil push terminals large enough to grip one 8-gauge wire for extreme current flow, all from one side of the frame for an easy, solid setup. included screw-hole covers hide all mounting hardware for a clean-looking, complete installation.
Specifications:
Rated Impedance [Ω] | 2 |
Fs [Hz] | 30.6 |
Sensitivity [1W, 1m] | 88.6 |
Qts | 0.472 |
Qes | 0.496 |
Re [Ω] | 6.03 |
Vas [ft³, L] | 2.5, 70.747 |
Continuous Power Handling [Watts RMS] | 1100 |
Outer Frame Dimension [in, cm] | 15-3/8, 39.1 |
Mounting Depth [in, cm] | 8-15/16, 22.6 |
Mounting Cutout [in, cm] | 13-7/8, 35.2 |
Frequency Response [Hz] | 18 – 100 |
Minimum Sealed Volume ft3 (L) | 1.5 (42.5) |
Minimum Sealed Power Handling | 1100 RMS |
Maximum Sealed Volume ft3 (L) | 6 (169.9) |
Maximum Sealed Power Handling | 1100 RMS |
Box Volume [ft³, L] | 1.5 (42.5) |
Panel A [in, cm] | 16.5×16.5, 41.9×41.9 |
Panel B [in, cm] | 16.5×11.5, 41.9×29.2 |
Panel C [in, cm] | 15×11.5, 38.1×29.2 |
Box Volume, ft³ (L) + port displacement | 3.0, 85 |
Port Opening Size, in x in (cm x cm) | 2.5×16.25, 6.4×41 |
Power Handling, RMS | 1100 |
Box Volume, ft³ (L) | 6.0, 170 |
Port Opening, in x in (cm x cm) | 3.5×16.25, 8.9×41 |
Power Handling, Watts RMS | 1100 |
Diameter | 15 Inch |
Sensitivity | 88.6 dB |
Impedance | 2 Ohm |
Frequency Response | 18-100 Hz |
Peak Power Handling | 2200 Watts |
Design | 1 Way |
Top Mount Depth | 8-15/16 Inches |
Shallow Mount | No |
Number of Voice Coils | Dual |
RMS Power Handling | 1100 Watts |
Reviews:
A bit pricey. Other subs my handle more wattage, but the clarity is outstanding. I don't want to be heard blocks away, I just want a nice low end, however I can do both. I have it shoehorned into the back of a 2011 Chevrolet Camaro SS. It's in a 4ft³ enclosure, ported to 32hz, but I can also run sealed by putting a plug in the port for a tight bass. Sealed has always been better for my style of music: rock and metal. No mechanical wattage problems in a sealed box that big either. Another reason for the purchase, the specs showing the mechanical and power wattage are the same. You loose no mechanical wattage in a bigger box when sealed. Running the Kicker 1200.1 mono. External battery. Rockville 30 farad cap.Buzzard
It has Good sound quality my son loves it. Would purchase again if I need.3kickercompQ15s
12. Alto Tx215 15" 2-Way Powered Loudspeaker
Product Details:
This bi-amplified full-range loudspeaker delivers premium sound in an economical, yet rugged molded enclosure with sleek, modern styling. the alto tx215's 15" long-excursion woofer and 1" titanium compression driver give clean, accurate audio with deep, punchy bass, clean vocals and crisp, unwavering highs. thanks to a redesigned precision horn, the tx215 boasts improved high-frequency performance and produces a very precise 90 ̊ x 60 ̊ radiation pattern for optimal audience coverage.at the core of the tx215 active speaker is lightweight and efficient class-d amplification. providing the maximum power at a minimal weight, the tx215 cranks out 300 watts of continuous power, and 600 watts of peak power.with the tx215—and the rest of the tx2 series—alto professional has created a family of powered loudspeakers suitable for most demanding gigs, night after night. utilizing much of the technology of their acclaimed ts3 series, the new tx2 series delivers the power and clarity need to sound best.in addition to high-end sound quality and performance, the tx215 sports a rugged, lightweight, easily-transportable cabinet. its trapezoidal shape enables either upright or wedge monitor positioning and the full-sized steel grille gives complete driver protection. make no mistake—the tx215 is built for continuous heavy-duty use. add to that its full complement of i/o and mounting options and it’s easy to see why the tx215 is poised to play an indispensable role in next performance.
Specifications:
Product Type | Loudspeaker |
Maximum Power Output | 600 Watts |
Coverage Angle | 90° H x 60° V |
Amplification Type | Bi-amplified |
Product Shape | Trapezoidal |
Reviews:
I bought one of these speakers here at MF about 4 years ago and with this sale price, it is even less expensive now! This powered monitor is a true workhorse and it has enormous headroom. I have used this speaker in many musical applications and it has performed flawlessly. I bought a Harbinger 4112, last year and played a Yamaha P-515 directly straight into the back of each speaker, rather than into a mixing console/board. I did a mono, one speaker comparison. The Harbinger did have better frequency response, yet was much more harsh sounding. This Alto sounds smooth and warm and I have never needed to turn it past unity gain. This monitor is on sale right now and I can not recommend buying it, enough. The listed 1000 watts RMS are real, and the drivers can handle the power with ease. The only point of contention is that they do scratch very easily and so I would find a good generic extra sized tote for each monitor and wrap each one with a thin blanket before placing them inside for transporting. Highly recommend this product, especially at this very reduced sale price.NoteJunkie
Thank you Pmt for delivering my speak and the very next day during this epidemic of COVID-19. Very pleased with this ALTO Ts310 It is a great product I’ve had the 8 inch and a 10 inch and I love to know what the 15inch sounds like. Also own QSC K-series speakers two and the Bose L1S system. I know a thing or two about sound Quality. If these speakers are reliable I can see me buying many more of these for the music sessions I do. I can leave these in the boot of my car and get in from a GIG to my family and not have to unload the whole car, they are nice and compact and have plenty of power for an all nighter in a normal size pub. In fact the sound quality has made me compare this to Speakers three times the price, in my situation I don’t need to push the sound too loud so that the audience is uncomfortable for me although they have for 2000 W available I only use about 25% of that in the small venues I run. I do my big outside venues for 2000 people that’s when I need my QSC is all outfront and I use these I do my big outside venues for 2000 people that’s when I need my QSC is all outfront and I use the Altos as Foldback. An absolutely brilliant product you can’t go wrong really with the eight 1012 inch models they give you a great result ultraportable really worth every penny how they value secondhand and they really got a good name for themselves now.adam h.
I purchased the TS312 as basically a "second attempt" to find an all-around speaker for home practice using my HX Stomp (modeling pedal), as well as synths, drum machines, and some bass guitar. I first purchased the HeadRush FRFR-108, which was a new release as a smaller version of last year's FRFR-112. (The FRFR-112 and TS312 are essentially the exact same speaker – the HeadRush is just marketed towards use with guitar modelers). But the FRFR-108 was a pretty big disappointment – the low end was flabby and distorted, even within the typical frequency range of guitars. And trying to run bass guitar or deep frequencies from a synth or keyboard was essentially a non-starter. The Alto TS312 excels in all of the areas that the FRFR-108 failed me. It has massive low end when placed on the floor as a "wedge" monitor, but retains clarity and articulation even at lower practice volumes. Modelers like the Helix can cover a huge variety of tonal genres, and the TS312 accurately conveys those sounds while feeling mostly like a "real amp". The only real downside to the TS312 is that at 35 pounds and approximately 2 feet in width, it's not quite as compact as I had hoped. But it's also not significantly bulkier than a 12" guitar combo (or certainly a 2×12" like a Fender Twin or Vox AC30). With the giant handles on all sides, it's also much easier to move around. And unlike a guitar amplifier, a good FRFR/PA speaker can be used with a variety of instruments, including guitar, bass, synth, drum machines, and vocals. This Alto unit seems to be a pretty good value and I hope to get many years of good use out of it.Jeff H
13. Electro-Voice Zlx-15 Passive 15" 2-Way Loudspeaker
Product Details:
Fill the room with these powerful, portable passive speakers from ev's zlx series. the zlx-15 pushes 1000 watts peak through a 15" woofer and 1.5" hf driver. electro-voice zlx-15 2-way loudspeaker engineered to the electro voice's exceptional audio quality standards, the electro voice zlx-15 passive loudspeaker delivers high powered performance for venues that need a big sound for a large area. zlx-15 passive speakers feature a 15-inch woofer, 1.5 inch titanium compression driver and uses the industry's most trusted components to handle up to 1000 watts peak for a loud and clear audio for any application. when choosing a loudspeaker, it's always wise to ask what's inside the box. then take a listen and hear the ev difference for yourself. featuring custom drivers housed in a breakthrough cabinet design, the two compact and versatile passive zlx models make ev's legendary sound quality and rugged reliability more accessible than ever before.
Specifications:
Product Type | Stage speaker |
Enclosure Material | Polypropylene |
Design Features | Built-in carrying handles |
Grille Color | Black powder coat |
Speaker Type | 2-way – passive |
Continuous Power | 250 Watt |
Peak Power | 1000 Watt |
Frequency Response | 44 – 20000 Hz |
Nominal Impedance | 8 Ohm |
Max Output Level (Max SPL) | 126 dB |
Sensitivity | 96 dB |
Crossover Frequency | 1700Hz |
Coverage | 90° x 60° |
Driver Details | Speaker: woofer driver – 15" Speaker: tweeter driver – 1.5" – titanium – compression driver |
Connector Type | 2 x speakers input (speakON NL4 (4 pole)) |
Width | 16.7 in |
Depth | 15.1 in |
Height | 27 in |
Weight | 48.5 lbs |
Reviews:
After doing a lot of shopping around looking at Mackie, QSC, and JBL products as potential alternatives, I kept coming back to these because they had the best combination of sound quality and features at a reasonable price. I use them for mobile DJ/events where I don't need insane sound pressure, so for my purposes the bass is adequate and how I like it – relatively tight. I pair this with a Serato/Pioneer DDJ SR set-up and the sound quality is great. I also use them at home for music listening and karaoke nights. My music collection is pretty diverse, and so far everything from Philip Glass to the Freelance Whales to RJD2 sounds solid on them at volume. But if you need high levels of sound pressure and play a lot of EDM, then you will probably want a sub. When I was on the fence about the purchase, I noticed that a very talented local Jazz combo was using them for live performances where they were delivering great clarity and tonal characteristics on all of the instruments. While that wasn't my personal use, it sealed the deal. While I have been impressed with the sound quality and output of QSC products, these give you nearly all of the bang for half the buck.Pfatte D
If you're looking at this speaker, you're also probably looking at similar stuff within anywhere from the 200-600 price range. If that's the case, then stop looking, because you've found your new speakers. I have owned several comparable Behringer and Mackie speakers, and let me say, there is no comparison. When comparing stats of comparable speakers (watts, sensitivity, frequency range, etc.), you could drive yourself mad just trying to figure out where the bang for your buck will be. But after hearing these, I can confidently say they are: 1) LOUD – Coming from my mixer I had various XLR, line-in, and aux signal levels at -6 db to 0 db, and given a good signal like that, I had the speaker set at -10 db and it sounded great and just loud enough for all the bars and what not my 4-piece rock/pop band plays…then when you up the speaker to 0 db or more, it just gets stupid loud. There is a point where it gets harsh and high, but you'll just never get there. It's that loud. 2) VERSATILE – I love the DSP settings, and the ability to set EQ (at least high and low). It would work well as a monitor, but I use it for mains. I use it on "music" mode, and I bump the bass EQ up +3 db. It's certainly not a sub, and it drops off quick at anything lower that 100hz, but I find it has enough bass to carry a band in a small bar setting. Just get them up high on some poles so that people's bodies don't absorb too much of it. 3) CLEAR and TRANSPARENT – I don't know if it's the split baffle or the DSP or what, but the high and low frequencies sound separated, clear, and whole. It sounds so good. Compared to my old Behringers or Mackie Thumps, it is just a more whole sound profile. It's as if your signal is running through a BBE exciter or something. Only complaint is a little bit of hiss/noise floor from the horn when the speaker is set anything above -6 db on the master. Would only ever be heard in a quiet room, and is expected at this price point. Not an issue, but it's there.Vinny the Snake
I use two ZLX-12p speakers on poles for gigs with a solo guitar and vocals. Even outdoors, where sound evaporates into the air, these speakers have enough punch to fill an acre and a cover a crowd of 300 with exceptional clarity. They easily handle indoor performances. I do a lot of finger-picking, and these speakers are perfectly balanced to pick up every note. They also cover vocals with astonishing clarity, which is critical for a solo act. The audience will hear every word, and the speaker clarity highlights every intonation you put into your vocals. These speakers give you more control as performer. Other musicians have approached me following a show and asked me how I get my PA sound so crisp and clean. Use high quality gold cables to eliminate minor hiss and deliver a strong line signal (obscenely expensive for cables, but worth it). I also use a mixer for EQ adjustment, compression, and a very small touch of reverb. If you perform a lot, I'd also recommend getting the speaker covers. While the plastic cabinets are relatively light and easy to transport and lift onto the poles, they scuff easily. To keep them looking nice, invest in the covers. Most speakers sound pretty good at low volumes in a small room, making comparisons nearly impossible. So kudos to Sam Ash, where I could compare speakers from 100 feet away (where your audience will be).Solo perfomer
14. Electro-Voice Zlx-15bt 15
Product Details:
Powerfully splits 1000 watts between the subwoofer and high-frequency driver 15′′ woofer packs a serious punch with impressive low end down to 50hz built-in bluetooth for easy access to your devices 2 mic/line combo inputs for microphones, instruments, or a board feed 3.5mm aux input lets you play music from your laptop, phone, or another mobile device vehicle interior space is at a premium when you’re out on the road. fortunately, the electro-voice zlx line of speakers packs a whole lot of no-nonsense clean audio into a compact, portable form factor. just plug in a mic, instrument, or mixer and take the stage. the e/v zlx-15bt splits 1000 watts between its powerful woofer and its titanium high-frequency driver for an impressive 126db spl. it’s also packed with smart features, including onboard dsp with eq and placement presets, back-panel clip indicators, and auto-limiting to protect your amp and speakers against overloads. and with onboard bluetooth, accessing your music library has never been easier — a feature the djs here really appreciate!
Specifications:
Reviews:
After doing a lot of shopping around looking at Mackie, QSC, and JBL products as potential alternatives, I kept coming back to these because they had the best combination of sound quality and features at a reasonable price. I use them for mobile DJ/events where I don't need insane sound pressure, so for my purposes the bass is adequate and how I like it – relatively tight. I pair this with a Serato/Pioneer DDJ SR set-up and the sound quality is great. I also use them at home for music listening and karaoke nights. My music collection is pretty diverse, and so far everything from Philip Glass to the Freelance Whales to RJD2 sounds solid on them at volume. But if you need high levels of sound pressure and play a lot of EDM, then you will probably want a sub. When I was on the fence about the purchase, I noticed that a very talented local Jazz combo was using them for live performances where they were delivering great clarity and tonal characteristics on all of the instruments. While that wasn't my personal use, it sealed the deal. While I have been impressed with the sound quality and output of QSC products, these give you nearly all of the bang for half the buck.Pfatte D
If you're looking at this speaker, you're also probably looking at similar stuff within anywhere from the 200-600 price range. If that's the case, then stop looking, because you've found your new speakers. I have owned several comparable Behringer and Mackie speakers, and let me say, there is no comparison. When comparing stats of comparable speakers (watts, sensitivity, frequency range, etc.), you could drive yourself mad just trying to figure out where the bang for your buck will be. But after hearing these, I can confidently say they are: 1) LOUD – Coming from my mixer I had various XLR, line-in, and aux signal levels at -6 db to 0 db, and given a good signal like that, I had the speaker set at -10 db and it sounded great and just loud enough for all the bars and what not my 4-piece rock/pop band plays…then when you up the speaker to 0 db or more, it just gets stupid loud. There is a point where it gets harsh and high, but you'll just never get there. It's that loud. 2) VERSATILE – I love the DSP settings, and the ability to set EQ (at least high and low). It would work well as a monitor, but I use it for mains. I use it on "music" mode, and I bump the bass EQ up +3 db. It's certainly not a sub, and it drops off quick at anything lower that 100hz, but I find it has enough bass to carry a band in a small bar setting. Just get them up high on some poles so that people's bodies don't absorb too much of it. 3) CLEAR and TRANSPARENT – I don't know if it's the split baffle or the DSP or what, but the high and low frequencies sound separated, clear, and whole. It sounds so good. Compared to my old Behringers or Mackie Thumps, it is just a more whole sound profile. It's as if your signal is running through a BBE exciter or something. Only complaint is a little bit of hiss/noise floor from the horn when the speaker is set anything above -6 db on the master. Would only ever be heard in a quiet room, and is expected at this price point. Not an issue, but it's there.Vinny the Snake
I use two ZLX-12p speakers on poles for gigs with a solo guitar and vocals. Even outdoors, where sound evaporates into the air, these speakers have enough punch to fill an acre and a cover a crowd of 300 with exceptional clarity. They easily handle indoor performances. I do a lot of finger-picking, and these speakers are perfectly balanced to pick up every note. They also cover vocals with astonishing clarity, which is critical for a solo act. The audience will hear every word, and the speaker clarity highlights every intonation you put into your vocals. These speakers give you more control as performer. Other musicians have approached me following a show and asked me how I get my PA sound so crisp and clean. Use high quality gold cables to eliminate minor hiss and deliver a strong line signal (obscenely expensive for cables, but worth it). I also use a mixer for EQ adjustment, compression, and a very small touch of reverb. If you perform a lot, I'd also recommend getting the speaker covers. While the plastic cabinets are relatively light and easy to transport and lift onto the poles, they scuff easily. To keep them looking nice, invest in the covers. Most speakers sound pretty good at low volumes in a small room, making comparisons nearly impossible. So kudos to Sam Ash, where I could compare speakers from 100 feet away (where your audience will be).Solo perfomer
15. Peavey Pv115 2-Way 15" 800w Passive Pa Dj Sound Pv115 Speaker System (2 Pack)
Product Details:
Yeah, your live music setup is dope, but it could be even more awesome when you add these peavey pv 115 15 inch 2 way live sound speaker to your rig. this 2 way sound reinforcement enclosure is what you have been missing. it has a 15 inch heavy duty woofer, a titanium diaphragm compression driver, dynamic tweeter protection, and a crossover network that will blow your mind. it boasts 400 watts of rms power and 800 watts of peak power handling with a lightweight trapezoidal enclosure and high quality, rugged carpeting with steel handles and corners. this speaker also has a full length steel grille, a 90 by 40 degree coverage constant directivity horn, and t nut mounting. for incredibly clear and punchy sound and major reliability on your setup, trust the peavey pv 115 15 inch 2 way live sound speaker.
Specifications:
Product Dimensions | 33.5 x 20.25 x 16 inches |
Is Discontinued By Manufacturer | No |
Speaker Amplification Type | Passive |
Power Source | Corded Electric |
Wattage | 800 watts |
Reviews:
Sound: Awesome sound quality. I was a little concerned when I read some reviews online that said these guys lacked bass. To prepare for that I purcahsed a Peavey 118 with these speakers to help compliment the bass. By themselves the 115's are great and you won't be disappointed as long as your amp can throw enough power to feed them. Features: Speakers really have no features other than good sound and the sound from these speakers turned out to be even better than I was expecting. Ease of Use: 1/4" TRS connection with a second parallel TRS for daisy chaining if needed. Quality: These things are very well made and should have no problem standing up to years of use. As far as speakers go they are very commerical looking and quite attractive. Value: I really don't think there is a better deal to be had anywhere. These are great speakers for $219/each. Free shipping a free speaker stands from zZounds just made a great deal even better. Manufacturer Support: I have not needed support yet but both zZounds and Peavy have great repuations for support. The Wow Factor: They are attractive, well built and have a nice professional look. I am really happy with my purchase of these 115 mains. Overall: Knowing they are Peavey's, I am confident in many years of flawless use. Shoudl I have to ever replace them I would certainly buy them again.
Clear sound. I purchased this one to replace an old TOA from the 90's. The tone is much better. I used it for a gig and it sounded great. I also used it to dj a large party. The trapezoid shape makes it easy to use as a stage monitor with one concern, watch for feedback from the large tweeter. We spun the tweeter away from the mic and now the drummer can hear at rehearsals. It uses 1/4" jacks with an output to chain if needed. I plan on getting a matching speaker after the next gig.JOHN
I just purchased 2 of these speakers and man these boxes sound awesome. The midrange frequencies are phenomenal, the bass is clean and punchy without the exaggerated boominess. I let my subs take care of that. When I set my crossover at 120HZ for these cabinets they sound so smooth and rich that I can pump much more than the recommended wattage requirements for them without clipping. These PV115's can really fill a room. I can't wait for the weather to break so that I can try them outdoors. I only have one bad thing to say about them and that is that they don't have speakon connectors. I modified the connector plate in the back of the cabinets to accommodate that. There is plenty of room on the connector plate to add a speakon connector, so much so that 2 speakon connectors can be added. Just keep in mind that doing so will probably void the warranty. I'm not really concerned with that because for the price that I paid and the reliability of Peavey products (5 year warranty when registered at their web site) this shouldn't be an issue.
16. Yamaha S115v 15" 2-Way Carpeted Loudspeaker System
Product Details:
Club series v gigging bands, mobile djs and houses of worship have helped make the first four generations of yamaha club series speakers incredibly popular. the refinements of generation v continue this success story: larger enclosures for improved low-frequency performance, improved drivers for higher power handling, redesigned crossovers, stronger grilles, and dual speakon and connectors. once again, with professional features, excellent sonic performance and great value, club series loudspeakers deliver premium quality night after night. yamaha has a long history of both making and reproducing music. the club series v loudspeakers represent the latest in our continuing effort to provide the professional features and sound quality you've come to expect and deserve. built in the united states, these loudspeakers are designed to provide years of service.
Specifications:
Product Type | Speaker |
Enclosure Design | Bass reflex |
Series | Club V |
Speaker Type | 2-way – passive |
Continuous Power | 250 Watt |
Peak Power | 1000 Watt |
Frequency Response | 55 – 16000 Hz |
Nominal Impedance | 8 Ohm |
Max Output Level (Max SPL) | 129 dB |
Sensitivity | 99 dB |
Speakers Included | 1 x speaker – 2-way – 250 Watt – 55 – 16000 Hz – 8 Ohm – wired |
Driver Details | Speaker: woofer driver – 15" Speaker: tweeter driver – 2" – titanium |
Width | 19 in |
Depth | 15 in |
Height | 28 in |
Weight | 60.41 lbs |
Reviews:
I have 2 pairs of the S115V , I also have the Peavey PV115. The Yamaha's handle 100/watts more per/channel each. They are good for a small or medium size room . They can handle bass as long as your overall volume is not cranked up across everything in the mix. If you want deep base for dance music or mic'ing a bass drum, use an active cross over and two sub-woofers. These are 99DB and the clarity is good with decent bite. If you have the cash and want the clarity that comes out and gets you at three times the cash for the JBL's at 137DB . Now don't think I mean the S115V's wont reach out there. It is only because you cannot use a higher volume amp that gives you instantaneous punch like 137DB gives you. But these speakers will do twice the room as the Yamaha's.I have had my first set of S115V's for 10 years. The only reason I am reviewing is that Kustom and most of the DJ marketed stuff is not as good and that is why it is cheaper. I would not go below a 1)Peavey/Cerwin Vega speaker then 2) Yamaha's 3) QSC/JBL/Yorkvilles/others. Peavey does have higher end array speakers as does Yamaha that are comparable to QSC/JBL/Yorkvilles but at the same price and lower DB's ? For those prices I would go with the JBL's. When you get to looking at specs they all claim the same power speakers for around the same prices in the different product lines. Always check the SPL and the peak power rating's to decide . Much of the DJ gear is like car audio rating's which are exaggerated or represent a certain frequency for 2 seconds before it blows : ) Now there is even higher end gear above what I have mentioned . This of course is my opinion but I think it is real world experience from years of doing audio.Duncan
Overall: These sound great. I'm an audiophile as well as a keyboard musician and I hate speakers that are loud but don't have good fidelity. These sound like good stereo speakers, nearly audiophile. Because my gig venues have gotten bigger I just bought 4 JBL SRX 725 and now use these turned around as monitors when I use my big rig (outdoor concerts), but still use them as primary for smaller rooms. They are pretty heavy for little speakers, but if you've got big magnets and good construction there isn't much you can do about it. Like everyboday else has said, the rubber feet suck and will be gone by the second gig. Stop at Home Depot and buy some big plastic half-moon feet that use 2-3 screws to attach to the cabinet. I'm not a big fan of the carpet, and not long ago, getting the speaker up off the speaker stand, the carpet rubbed hard on the inside of my arm and my skin did NOT react well. Got all red, and got some kind of chemical reaction to the carpet. 6 weeks later, I can still see the marks. I bought the 118 subwoofer to go with it, and have never needed it for live music. I suppose for DJ or hard rock you might, but for reception type live performance, I get plenty of low bass out of these for the amount of total volume I need. Recently played a fundraiser for 500 people in an acoustically dead room, and had PLENTY of volume headroom left in these things. Unless you are just balls to the wall loud, two of these are all you need. If you are really, really loud, get 4 of them, Yamaha 215's or JBL 725's for insanely loud.
I got these to replace a pair of Peavy 12's I had for years. let me be one of many to tell you. they are exactly the kind of thing a DJ/KJ could want. the highs Are a bit harsh, however, it is a goot thing in a vocal situation where the singer has a deeper voice or the mic is a bit muddy. In DJ mixes, it is not an obsticle. just watch your highs. I personally had them modified to bi-amp, but that is a need of mine and not something I hold against Yamaha. it is an amazing peice of gear for those who can lift it. it is bulky, and not something you want to put in a car. at small gigs, with enough eq you wont need a sub assuming you can crank it. if your max volume will be in question, use a sub.yes there are better speakers out there, but do not expect to pay less for them. with live music I would go with the 215 version, or some really good instrument mics. but if these are in you're price range they wont dissapoint unless you are used to RCFs and QSCs, in that case, what are you doing here? for you newer DJs, these are a great stepping stone onyour way to those higher end pieces. and they will last. However, I would recomend removing the cloth when it gets older and spray it with truck bed liner.ProSonic LIVE!
17. Jbl Prx415m 2-Way 15" Passive Speaker
Product Details:
Specifications:
Product Type | Monitor speaker |
Enclosure Color | Black |
Design Features | DuraFlex finish |
Grille Color | Black |
Speaker Type | 2-way – passive |
Continuous Power | 300 Watt |
Peak Power | 1200 Watt |
Frequency Response | 55 – 19000 Hz |
Nominal Impedance | 8 Ohm |
Max Output Level (Max SPL) | 122 dB |
Sensitivity | 98 dB |
Crossover Frequency | 2200Hz |
Coverage | 90° x 50° |
Additional Features | Integrated carrying handle |
Speakers Included | 1 x speaker – 2-way – 300 Watt – 55 – 19000 Hz – 8 Ohm – wired |
Driver Details | Speaker: woofer driver – 15" – Differential Drive Speaker: tweeter driver – 1" – polymer – compression driver |
Width | 16.9 in |
Depth | 18 in |
Height | 25.6 in |
Weight | 46.3 lbs |
Reviews:
I've used the old MRX line for a few years now and love the way they sound for FOH. I bought these to replace some Yamaha SM12Vs that I used for monitors and the PRX412Ms sound great, far superior to the Yamahas. I haven't tried for FOH, but I like the idea of being able to fly them if needed with the suspension points.Chris
18. Jbl Jrx225 Dual 15" Two-Way Sound Reinforcement Loudspeaker System – Black
Product Details:
Specifications:
Product Type | Speaker – for PA system |
Enclosure Material | MDF |
Design Features | Black carpeting |
Speaker Type | 2-way – passive |
Continuous Power | 500 Watt |
Peak Power | 2000 Watt |
Frequency Response | 42 – 18000 Hz |
Nominal Impedance | 4 Ohm |
Recommended Amplifier Power | 500 – 1000 Watt |
Max Output Level (Max SPL) | 133 dB |
Sensitivity | 100 dB |
Crossover Frequency | 2200Hz |
Coverage | 90° x 50° |
Recommended Placing | Floor-standing |
Additional Features | Overload protection circuitry, integrated carrying handles |
Speakers Included | 1 x speaker – 2-way – 500 Watt – 42 – 18000 Hz – 4 Ohm – wired |
Driver Details | Speaker: 2 x woofer driver – 15" Speaker: tweeter driver – 1" – compression driver |
Connector Type | Speakers input (Speakon) Speakers input (phone 6.3 mm) |
Width | 18.3 in |
Depth | 17 in |
Height | 43 in |
Weight | 93.92 lbs |
Reviews:
A lot much better then the single 18 inch 1500 watt edition and has a lot more power and much more bass than the single 18. Only downside is its 30 lbs heavier then the first product. But is very power conservative and very easy to use even the non tech savvy could figure it out .colton.l
I just purchased these speakers last week. My first gig out was a wedding. Before with my pr15 peavey speakers people would say the music was really good. Now with my new JBL JRX225's the party didn't want to end !! I got so many compliments on how awesome the music sounded! Thank you JBL for helping me get to the next level of entertainment !!!! LET'S GET THE PARTY STARTED !!!!Wired for Sound Dj and Karaoke C
19. Jbl Prx425 15" Two-Way Loudspeaker System – Black
Product Details:
Specifications:
Product Type | Speaker |
Enclosure Color | Black |
Design Features | DuraFlex finish |
Grille Color | Black |
Speaker Type | 2-way – passive |
Continuous Power | 600 Watt |
Peak Power | 2400 Watt |
Frequency Response | 48 – 19000 Hz |
Nominal Impedance | 4 Ohm |
Max Output Level (Max SPL) | 134 dB |
Sensitivity | 100 dB |
Crossover Frequency | 2200Hz |
Coverage | 90° x 50° |
Additional Features | Integrated carrying handles |
Speakers Included | 1 x speaker – 2-way – 600 Watt – 48 – 19000 Hz – 4 Ohm – wired |
Driver Details | Speaker: 2 x woofer driver – 15" Speaker: tweeter driver – 1" – polymer – compression driver |
Width | 16.9 in |
Depth | 20.5 in |
Height | 41.1 in |
Weight | 73.85 lbs |
Reviews:
Overall: I got a pair of the dual 15's we run vocals, guitar & keyboards and two 18' sub's PRX418s we run kick drum & bass my best investment yet in speakers. They are so crystal clear and out perform the other speakers we had. We're in the process of adding two more 18' subs. No problems yet we don't have to push the speaks. Great speaker JBL keep up the great work.Amahl
I bought a pair of these for my home studio, these things are amazing and worth every penny. My whole studio is wired with Mogami Gold Cables which also makes a huge difference. If you want a pair of killer speakers at an awesome price, buy a pair of these JBLs. You won't be disappointed.Daniel
20. Kicker 15in Solo-Baric L7s Subwoofer – 4 Ohm
Product Details:
The kicker solo-baric l7s boasts massive power handling and more cone area than any circular sub. you move more air, so you get more bass. the heavy-duty motor structure includes a large-diameter spider for less flex, longer life and superior accuracy. high-temp voice coil wire winding completes a powerful comp motor that makes the most of every watt you give it.
Specifications:
Product Type | Subwoofer driver – for car |
Speaker Type | Passive |
Speaker Diameter | 15" |
Continuous Power | 1000 Watt |
Peak Power | 2000 Watt |
Frequency Response | 18 – 100 Hz |
Nominal Impedance | 2/8 Ohm |
Sensitivity | 89.4 dB |
Driver Details | Car subwoofer driver: subwoofer driver – 15" – ceramic – injection molded polypropylene – dual voice coil |
Recommended Enclosures | Sealed – 1.5 – 6 cubic feet Ported – 3 – 6 cubic feet |
Width | 15 in |
Depth | 8.7 in |
Height | 15 in |
Weight | 17.64 lbs |
Width | 13.7 in |
Height | 13.7 in |
Reviews:
I was pushing 500w rms through this thing through break in, and it was meh. Not impressed. Then went to 1200w RMS and my. my. my. I could barely see the road from the vibrations at 40hz. It reaches down and grabs a handful of short and curlies. Also make sure your box is reinforced, it'll shake apart in no time.tall_dee
Bought this cause I had the L5's and blew them with a new amp. These speakers are way better than I would have expected. I mean I knew the quality was going to be good but the sound quality was out of this world great. The price is a little high but in the end the product is overall very much worth it. Have fun setting some car alarms off!!CWing420
I only had enough space for one sub of this size so I wanted to use the solo baric. I've had several models thru the years & they always perform well. This little L7 dvc 8" handles the huge amp I put on it & does it like a champ. Unbelievable quality bass, & it compares to other setups using 2 10's or one 12" sub! Kicker Solo Barics subs still kickin a__!!! Great sub & well worth the cost. Thanks a lot Kicker. Great product as expected.chahane-9
Related posts:
- Best 12 Guitar Speaker (2024 Update)
- Guitar Amp And Cord For Sale (2024 Update)
- 120 Watt Guitar Amp For Sale (2024 Update)
- Best 12 Inch Guitar Speaker (2024 Update)
- Best 12 String Guitar Strings (2024 Update)
- Best 7 String Guitar Strings For Metal (2024 Update)
- Speaker For Bass Guitar For Sale (2024 Update)
- 10 Bass Guitar Speaker For Sale (2024 Update)
- Best 10 Inch Bass Guitar Speakers (2024 Update)
- Lyxpro 30 Inch Electric Guitar For Sale (2024 Update)