Are you looking for the 10 Bass Guitar Speaker? If so, you’ve come to the right place.
Choosing the 10 Bass Guitar Speaker can be difficult as there are so many considerations, such as B&C Speakers, FaitalPRO, Dayton Audio, Eminence, Ashdown, Celestion, Jensen Loudspeakers, Seismic Audio. We have done a lot of research to find the top 20 10 Bass Guitar Speaker available.
The average cost is $103.69. Sold comparable range in price from a low of $52.50 to a high of $159.67.
Based on the research we did, we think Celestion Pulse10 10" 200W Bass Speaker is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling 10 Bass Guitar Speaker (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
Features:
- Copper coil offers optimal power conduction for enhanced efficiency
- Crafted with kevlar loaded paper for increased audio distribution
- Chassis built with steel, it helps provide an enhanced structural strength
Reviewers Noted:
Sound quality
Features:
- Stitched rubber surround.
- Fiberglass reinforced cap.
- Size: 10 in.
Features:
- Ideal for pro audio and bass guitar applications as a mid-range speaker.
- Useful in both sealed or vented enclosures.
- Works well in single or multi driver designs.
Features:
- The 98.7 db sensitivity helps reduce the noise distortion for a clear sound quality
- Neodymium driver helps in less power consumption for efficient performance
- Change the damaged 10" speaker of your bass guitar with this replacement unit
$119.99
4.9
Features:
- Recommended for professional audio and bass guitar applications
- Great as a woofer/mid-bass or midrange in vented monitors, satellites and multi-way enclosures
- Suitable for bass guitar, keyboards, club music systems and stage monitors
$146.99
4.8
Features:
- 200 watts rms – 400 watts peak
- Wired at 8 ohms
- Frequency response: 30 hz-5k hz
Reviewers Noted:
Good sound quality . Powerful . Low quality build . Size . Ease of setup
Features:
- A ribbed, uv-treated surround with white double stitching binds the suspension to a thick polypropylene cone for excellent reliability
- The basket uses high-quality stamped steel for outstanding stability under extreme stress
- The bumped back plate allows the high-temp voice coil to move even more, so you get deeper bass without distortion
$159.67
4.1
Reviewers Noted:
Good sound quality . Long battery life . Easy to use . Ease of setup . Portable
Features:
- 700 watts pmpo
- Built in reactive party lights
- Two 10 inch sub-woofers
Features:
- Enjoy american music with this ragin cajun speaker
- The 75-watt output helps produce a loud sound
- This responsive speaker delivers improved tone and clarity
Features:
- 95 db sensitivity helps provide an immersive sound experience
- Frequency response of up to 5000 hz lets you enjoy the midrange vocals
- The pressed steel design helps make the build sturdy
$109.00
4.8
Features:
- The 96 db sensitivity offers reduced noise and minimal distortion for an enhanced audio experience
- Neodymium magnet cone helps improve the sensitivity of this speaker
- Developed with 8 ohms impedance to deliver powerful sound output
$99.99
4.7
Features:
- Neodymium magnet for lightweight performance
- Copper voice coil on polyimide former
- Non-vented core
$114.99
5.0
Features:
- Series : signature model : ga10-sc64-16
- Application : 10 open or closed back configuration : 1 2 or 4 x 10
- Break-up modes : medium power range : up to 20 watts instrument : lead/rhythm guitar genre of music : rock blues country
$66.82
4.9
Reviewers Noted:
Good sound quality . Bass performance
Features:
- Guitarist description: warm, straightforward tone with a pronounced low end. when presented with overdrive distortion, it presents some mean fuzz.
- 10 inch speaker.
- Lows: tight/fat.
$119.99
5.0
Features:
- Package dimensions: 28.7 h x 13.2 l x 28.4 w (centimetres)
- Package weight: 4.241 kilograms
- Power rating: 200w
$67.95
5.0
Reviewers Noted:
Sound quality
Features:
- 2-1/2" voice coil for high power handling and excellent control
- 96.3 db efficiency with 400 watt rms power handing allows impressive output capability
- 10.5 mm excursion delivers high displacement for powerful midbass impact
$85.00
4.5
Features:
- Experience crystal clear and exceptional sound quality with this replacement speaker
- Supports up to 3,500hz frequency range so the produced sound could offer you a disruption-free quality
- Upgrade your guitar accessory with this replacement speaker
Features:
- Truncated frame allow for close driver to driver placement for multi-driver systems
- Cast aluminum frame will take the abuse of pro sound
- Powerful low frequency output in vented enclosures
Features:
- M-roll surround for higher excursion and less cone breakage
- Double dipped cone apex for a really strong cone neck
- Bumped back plate for greater incursion before damage
Features:
- Size: 10" chassis
- Rated power 60 watt rms
- Frequency range: 100 hz – 5.5 k hz
1. Celestion Pulse10 10" 200w Bass Speaker
Product Details:
With its robust steel-chassis, the celestion pulse10, provides a rock-solid bass performance whether alone in a single speaker combo, in a 4×10 or even an 8×10 cab. expect a tight, punchy low end with a warm mid-range that's full of presence, bringing focus and articulation to your playing. this heavy-duty driver truly delivers bass you can feel as well as hear.
Specifications:
| Product Type | Bass speaker |
| Chassis Material | Steel |
| Coil Material | Copper |
| Former Material | Polyimide |
| Nominal Diameter | 10" |
Reviews:
Excellent replacement speakers for any 8ohm 4×10 cab totally blow away stock ampeg speakers by a mile,nice punchy sound I also have the 15 inch model, 5 and 6 string players will definitely need it together the 4x10s and the 15 improved my tone more than I hoped they would these are some of celetions first bass speakers and i would have to say they hit the bullseye with them,good price for great speakers good celestionBassman2112
Jsem amatér. Odešlo mi 30 W kombo (zesilovač) a z něj jsem použil bednu, kde byl původně také 10-palcový reproduktor. Přikoupil jsem 300 W basovou hlavu Boehringer BXD3000H (za 4090 Kč), která váží cca 3,5 kg !!! takže mám za cca 6000 Kč lehce přenosné vybavení, hmotnostně na úrovni komba, které je schopné s 8 W reproduktorem vydat ze sebe výstup až cca 180 W RMS a ozvučit kromě hospůdek i větší prostory. Kdybych pokročil v hudební kariéře, mohu koupit 4 W reproduktor a dostat se tak na 300 W RMS. Zvuk pro mé potřeby skvělý, za kombo bych neměnil.
I had some old speakers from a bar. They needed to be reconed. For about the same cost as a reconing kit, I purchased two Celestion Pulse speakers. Unlike the bar speakers, these are intended for bass guitar. I put together a Baltic Birch speaker box and mounted them. So far they work. Little undue resonance. Good heavy magnets on these speakers.Daniel
2. American Bass 10" Shallow 1000 Watts Max 2.5" Voice Coil
Product Details:
Universal 10" es series 1000w 4 ohm dvc subwoofer by american bass, sold as unit. whether you are a fan of jazz, classical, rock, or pop music, deep basses are what you need to experience a great feeling of excitement. the subwoofers are engineered to provide you with an absolutely clean bass output and long-term reliability.
Specifications:
| Weight | 15.3 lb |
Reviews:
the under i come well the single that the pin came broken.ubide23
3. Eminence Legend Bp102-4 10" Bass Guitar Speaker, 4 Ohm
Product Details:
Specifications:
| maximum power | 400w |
| voice coil diameter | 2'', 50.8mm |
| magnet composition | ferrite magnet |
| cone composition | paper cone |
| nominal basket diameter | 10'', 254mm |
| magnet weight | 38oz |
| Driver Size | 10" |
| Weight (Approximate) | 8.90 lb |
| Speaker Diameter | 10" |
| Diameter | 10.1" |
| PMPO Output Power | 400 W |
| Minimum Frequency Response | 40 Hz |
| Maximum Frequency Response | 2 kHz |
| Sensitivity | 91 dB |
| Application/Usage | Indoor/Outdoor |
| Impedance | 4 Ohm |
| RMS Output Power | 200 W |
Reviews:
I wanted to try my hand at building my own bass cab to complement my amp head and because I wanted a quality sound I decided to go with Eminence, since you can find them in a lot of high end bass cabs like Ampeg and Basson. I didn't buy these at first, I bought the B102's instead and was disappointed with the end product. There wasn't enough clean low-end, and, I tuned the cab too low to compensate for that and it was a muddy tone that came out of an expensive set of speakers. So a year later I tried it again, but, I bought these on sale (BP 102's) and also bought the Eminence compression driver; Horn; Cabinet ready crossover. I now have a 210 bass cab that sounds better than any cab I've ever heard. I recently purchased a new bass amp (Markbass Big Bang) and together they are a match made in BASS HEAVEN. In fact without the purchase of the new amp, I may have never written this review, I've had theses speakers for over 2 yrs. So if you need to replace a 10" driver or you want to custom build a cab, this is the best driver for the money you can buy. But remember, without a tweeter or compression driver you'll be disappointed.Jmac
Searching for something better in my current upgraded ESS AMT3's, I took a change on these after modeling them in BassBoxPro. All I can say is wow!! These speakers totally kick some tail. Clean deep, and don't loose their composure under high volumes. However the biggest thing is detail. What better to produce bass guitar/drums like a live performance then a real bass guitar speaker?!?! Luckily these go lower then most, pretty amazing for the price. I have 2 of these in the AMT3 stock, but braced enclosure. 2.76 liter. Heavily damped with 1 1/2" foam on walls, and 2 sheets of Auralux 2" wedge foam directly behind the woofers. 2x 3" ports, 6" length. That tunes the box to 36 hz. Don't be afraid to tune low, the lower the better. They still can handle a ton of power, xlimit is 10 mm. Never cam close because the bass is tight, clean and deep. Well controlled, but oh so sensitive!! Wow the detail of these woofers just blows my mind!! Nothing even comes close in normal "audio" woofers. Be aware however to cross over to the mid around 250hz, these don't do mids well. But who cares in a 3-way? A Alpha 6A, or larger mid woofer would be ideal. Enjoy while these are still a still!! Who needs expensive audio woofers that kill all the detail anyway?Mojo
I replaced the dead speaker in my old practice bass amp with this speaker and was quite surprised how good it sounded and was surprised that it was better than the original in sound quality. gave new life to that old amp and saved me the cost of new amp. Good solid output in a sealed cabinet down to the low E on my 4 string fender bass.hotshoetom
4. Eminence Legend Ca1059 10" Bass Guitar Speaker 8 Ohm
Product Details:
Eminence legend ca 1059 500w 10" bass speaker a larger magnet version of the popular legend ca10, the legend ca1059 is a 10" cast-frame bass guitar speaker with a proven track record as the speaker for punch and clarity in many famous oem cabinets throughout the decades. like the ca10, the ca1059's chassis is truncated on the sides for tight fitting in 2x, 4, and 8×10 configurations. along with higher xmax, the ca1059 also features a larger 59oz. ferrite magnet, producing higher efficiency, and lower qts for dampening than its smaller magnet version.
Specifications:
| Power | 500 Watts |
| Nominal Basket Diameter | 10" |
| Frequency Range | 50 Hz – 3.2 kHz |
| Sensitivity | 98.7 dB |
| Magnet | Ferrite |
Reviews:
Eminence Legend CA1059 has a great sound that can handle the low end while playing a 5 string bass. I have used these speaker for the last 2 years and never had I had a problem with the quality of this product. Which made it easier for me to invest in a new pair of speaker to up date my bass cabinet.
5. Eminence Delta-10b 10" Bass Guitar Speaker
Product Details:
Specifications:
| Nominal Diameter | 10" |
| Power Handling (RMS) | 350 Watts |
| Power Handling (MAX) | 700 Watts |
| Impedance | 16Ω |
| Frequency Response | 71 to 3,700Hz |
| Sensitivity | 98dB 2.83V/1m |
| Voice Coil Diameter | 2.5" |
| Resonant Frequency (Fs) | 65Hz |
| DC Resistance (Re) | 11.6Ω |
| Voice Coil Inductance (Le) | 0.79mH |
| Mechanical Q (Qms) | 8.34 |
| Electromagnetic Q (Qes) | 0.35 |
| Total Q (Qts) | 0.33 |
| Compliance Equivalent Volume (Vas) | 1.27ft³ |
| Mechanical Compliance of Suspension (Cms) | 0.21mm/N |
| BL Product (BL) | 19.5T·m |
| Diaphragm Mass Inc. Airload (Mms) | 28g |
| Maximum Linear Excursion (Xmax) | 3.5mm |
| Surface Area of Cone (Sd) | 344.9cm² |
| Cone Material | Paper |
| Surround Material | Cloth |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Kapton / Polyimide |
| Basket / Frame Material | Steel |
| Magnet Material | Ferrite |
| Overall Outside Diameter | 10.09" |
| Baffle Cutout Diameter | 9.18" |
| Sealed Volume | 0.6ft³ |
| Sealed F3 | 185Hz |
| Vented Volume | 1ft³ |
| Vented F3 | 72Hz |
Reviews:
Excellent mid-bass. I built a pair of ported high/mid cabinets, each using two of these and a high quality tweeter. Wired them up with Zobel and crossover networks. Very efficient with good power handling. Good transient response and clarity. Vocals, guiter, keyboard-piano, and things in that range really come through. Better clarity than typical high/mid cab with 12 or 15 inch woofer. Not much low bass, but not what they are designed for. Use with bottoms. Would buy again.Mike - 10766
Very crisp and can take a lot of power, awesome soundWalls Walls
6. Seismic Audio – Pair Of 10" Bass Guitar Raw Woofers Speaker Driver Replacements – Jolt-10pair
Product Details:
Whether you are building your own bass guitar cabinet or replacing an old woofer, this 10 inch speaker woofer is what you need. the jolt series are awesome woofers that produce deep lows and clear tones. pressed steel chassis. these are ideal for bass guitar rigs. great for upgrading your existing cabinets or building you own. the jolt series packs tons of punch! so, put it in your cart today and get ready for years of trouble-free, crystal clear sound!
Specifications:
Reviews:
Almost doubled the volume. Very fast shipping! Loved these guys!John B.
7. Kicker Comp 10" 4-Ohm Subwoofer 43c104
Product Details:
The 2016 comp 10-inch subwoofer enclosure comes loaded with a single 4-ohm terminal. with a powerful kicker comp sub behind the truck bench, this thin comp sub box delivers both convenience and raw power – all in the one package. the comp 10-inch loaded enclosure works best with 150 watts of recommended power. the 2016 comp subwoofers give you deep bass and a great value.
Specifications:
| Product Type | Subwoofer – for car |
| Speaker Type | Passive |
| Speaker Diameter | 10" |
| Continuous Power | 150 Watt |
| Peak Power | 300 Watt |
| Nominal Impedance | 4 Ohm |
| Sensitivity | 86.2 dB |
| Driver Details | Subwoofer: subwoofer driver – 10" |
| Recommended Enclosures | Sealed – 1 – 2.4 cubic feet |
| Diameter | 10.6 in |
| Diameter | 9.1 in |
| Depth | 5 in |
Reviews:
I�ve had them: Alpine, Pioneer, Kenwood, JBL, CV, MTX, L7�s, and RF P3�s and P2�s…THIS little 10� mappatappa is the real deal! No joke. Built solidly and looks the part without being �cheesy� or �gadgety�, you know? I�ve not yet completely broken it in but it is quite impressive. I don�t miss the P3SD4-12 or 12� L7. And for $45? GET OUT! It�s loud but not overbearing (as long as you adjust it properly). I�ve pushed it with an JL XD600/6 and an RF600X5. Shockingly, the RF sounds better. I think it as an appetite for power. I�m sure it can get deep. I cross it over @160hz. I�ve not heard it drop hard and low LOW yet (not trying to kill it) but I�m sure it has the capability. I think I�m a Kicker sub fan now!Thanks for the hook-up, SonicElectronix. THEE premier source for mobile audio gear. Great prices, solid tech support (although hold times are ridiculous), and fast shipping. It�s ALL good.Sozo
8. Befree Sound Double 10 Inch Subwoofer Portable Bluetooth Party Speaker With Reactive Lights
Product Details:
This speaker not only delivers clear and extremely powerful sound but provides a light show to go with it. each of the large 10-inch sub-woofers has built-in reactive party lights which illuminate and liven up any scene. the unit features a top control panel with two large illuminated volume control nobs with a stunning blue halo light. separate volume control for the included microphone and the general speaker volume allow you to control the sound settings to perfection. whether you will use this unit for public speaking or social events, you simply can't go wrong.
Specifications:
| Speaker Size | 10” |
| Bluetooth | Yes |
| Inputs | Mic Input, guitar Input |
| Weight | 31 lb |
Reviews:
I did not have high hopes for this speaker when I purchased it. I am happy to say that this speaker has definitely exceeded my expectations. The box says that the battery has 6 hours of run time. Over the past 3 days I feel like I have used it for more than 6 hours, and at a fairly high volume. It is showing no signs of the battery being anywhere close to dead so far. The lights are a neat added feature that I also enjoy. The sound quality is also pretty decent. There's enough options for changing and tweaking the sound quality to the type of music that you're listening to that it would be nearly impossible to complain about the sound quality. It doesn't bump incredibly hard. But for the price it still gives off plenty of volume and kick. My only critique would be in the microphone. The microphone does not seem to be very good quality. Other than that I am a 100% satisfied customer thus far. Great product for the moneyskylposp
This is such a great sound machine. I highly recommend to my friends all the time. It's so versatile, allowing blue tooth input from your phone or laptop. It also allows you to connect a USB-A to USB-A from your laptop to the sound machine if you don't have a Bluetooth capable laptop. I love this machine and the mics are very good but as with many things you can upgrade them with better. My bottom line is that all my karaoke friends love it and want one. The warranty is great and customer service has been wonderful. I read reviews too and they convinced me to buy. I'm so glad I did and bought one for my girlfriend for Xmas.ROBERT
I really liked this speaker in the beginning. The sound was good (not great) and the price was reasonable. But less than a year later it showed an error message for the battery and then stopped working completely. So I bought new battery and installed it which requires taking the face off, removing the bottom speaker, removing the old battery and soldering in the new one. It worked fine again for about a month or so when the same error message came up and it quit again. So I’ll be buying a new one but definitely not this brand.Billy
9. Eminence Patriot Ragin Cajun 10" Guitar Speaker, 75 Watts At 8 Ohms
Product Details:
The eminence ragin cajun 10" guitar speaker gives you classic american tone with a fat bottom end. the 75w ragin cajun has a solid tone with sparkling highs with a little bite to it that's perfect for american rock, blues, and country music. you'll love how responsive and articulate this speaker is. put a classic american-sounding speaker in your guitar amplifier, with the eminence ragin cajun 10" guitar speaker!
Specifications:
| Product Type | Speaker driver |
| Speaker Type | Passive |
| Continuous Power | 75 Watt |
| Frequency Response | 80 – 5000 Hz |
| Nominal Impedance | 8 Ohm |
| Sensitivity | 100.5 dB |
| Magnet Type | Ferrite |
| Speakers Included | 1 x speaker driver – 75 Watt – 80 – 5000 Hz – 8 Ohm – wired |
| Driver Details | Speaker driver: mid-bass driver – 10" – ferrite – polyamide |
| Diameter | 10.1 in |
| Weight | 6.39 lbs |
| Diameter | 9.6 in |
| Depth | 4.3 in |
Reviews:
Overall: If you are looking to add volume and low end to your 10 inch combo or cabinet, look no further, this is it. The sound is pretty good for either clean or distorted sounds. It may not have the "magic" of some high end Celestions, but it sounds MUCH better than most stock speakers that come in mid to low priced amps and cabinets. In my opinion the best thing about this speaker is that this is the only speaker out there that makes a 10 inch combo sound like a 12 inch combo. (and it really does) I had put this speaker in a Laney Cub 10 and had it sitting on top of a 4X12 cabinet that I keep at my friend's practice space/ home studio. He walked in while I was playing and thought that I had it connected to the 4X12,.. no joke.Lawrence
Sound: Solid sound across a wide range of frequencies. The Ragin Cajun has a warm sound as opposed to the more jangly British sound that it replaced in a Vox Valvatronics VT40+. A definite improvement, especially as the original speaker had died. The Eminence product has more power handling capability so it is a step over the Vox "Original" sound. Features: Well its ceramic magnet is good but is not light weight like and alinco or neodymium would be. Ease of Use: Easy to install. Quality: Better than original. Value: Fair price! Manufacturer Support: Did not deal with the company directly, but the Eminence website has lots of data and you can hear the sounds on youtube. The Wow Factor: It has more of a bite than the original British sounding speaker and is also much louder, so it makes it possible to gig with a 10" amp. Overall: The speaker should outlast the amp. We'll see…
This 10” speaker is what every speaker should sound like. Tight low end, mids are just right and the high end is smooth. Now I put this in a fender frontman 25R. Yes it’s solid state, but this speaker made it a great practice amp. I would use this at a small gig that’s how much I think this speaker made this amp beyond usable now. I’m an Eminence fan for life.Vjgreen
10. Celestion Ten 30 10" Guitar Speaker 8 Ohm
Product Details:
Specifications:
| Product Type | Guitar speaker |
| Diameter | 10” |
| Depth | 3.8” |
| Weight | 3.5 lb |
| Frequency Range | 85 Hz to 5000 Hz |
Reviews:
Built a new Tweed Cabinet for my Epiphone Valve Junior, and changed out the 8" to a 10" Celestion. Much more range, obviously, but a little less power as the 5 watt amp is pushing more coil. I would have gotten an Alnico 10 with lower wattage, but the prices on those are out of the park for me. With the new Celestion, however, the amp handles pedals much better. As the new speaker breaks in, this will only improve.Mark O Matic
Received my new speaker, first allowed it to get warm temperature wise. Shipping in North Dakota can get items a little cold. Then installed, and even before this speaker has had time to be properly broken in. It instantly brought a new life to a fairly new amp. A Peavey VYPYR VIP-1. The Peavey original speaker was just an eight inch speaker. I can only believe that as the new speaker is slowly broken in. The quality will continue to be rich, and a full range of tones. I even ran some bass notes thru it. There was a great improvement here too. The over all quality of a small home amp, has been greatly improved.rh_493
Very happy with this choice for my First DIY amp, which is currently a 5W FootNote plate, a pine bee box, 3-ply poplar shelving front. This speaker sounds a lot better than I expected for the price. Comparing with the PEAVY VYPRR VIP1 modeling amp next to it, (also parts express) the clean tone is amazing.. like – the other amp is abandoned until I need fuzz again. I was startled by how detailed, musical, and dynamic it sounded direct from the guitar. Next time I get a chance to build a higher power amp, I'll check out some other celestions. Maybe a blue someday…Jay
11. Celestion Bn10-200x 10" 200w Neodymium Bass Guitar Speaker 8 Ohm
Product Details:
Light in weight but certainly not in performance, the bn10-200x neodymium bass speaker delivers a rich warm tone combined with a powerful low end punch. not every player wants a super-clean, high-fidelity bass sound. characterised by an extended low end and greater linear excursion, green label speakers push out every note with a rich, warm tone and a powerful low-end thump. green label speakers are primed for high-powered rock performances, where a full-bodied, warm, defined tone is essential.
Specifications:
| Magnet | Neodymium |
| Frequency Range | 45 Hz – 3500 Hz |
| Sensitivity | 96 dB |
| Voice Coil Diameter | 50.8 mm |
| Coil Material | Copper |
Reviews:
So far I'm impressed with the sound and weight reduction over the Bugera 10" they replaced. If they can stand up to 450 watts for the foreseeable future, I'll add the fifth star. My only reservation was the price but if they are a rugged as I hope they are, they'll be the right investment. Total weight savings for 2 10"- 10 pounds.JAMES
Went three stars on the features because its a driver only. Five string bass running through 1×10 combo from Line6. This driver much better than factory installed. Everything below B1 was total mud before. This Celestion has all the definition i want. Can play C#1 fifths and no distortion or mud just rich low end. Wonder what four in a 4×10 would sound like? Probably cause a tidal wave. Maybe price should be $120? With free shipping I don't care.Guest
12. Eminence Basslite S2010 10" Bass Guitar Speaker
Product Details:
Look inside most name brand bass amps and youll find custom designed eminence bass guitar speakers. the people who make them know what bass players want. from fast and tight to fat and round eminence speakers give you the tone to hold it all together. you dont have to break your back or your bank account either. upgrade your rig with classic eminence legend speakers. and eminence basslite speakers give you all the power and tone without the weight. from melodic runs to driving rhythm no other speaker does bass like eminence.
Specifications:
| Weight | 12 lb |
Reviews:
Using it in a series tuned vented box. Tuned around 65hz for fullrange guitar. Buttery, rich and full. Box net is around 1.25. Powered with 120 watts of hartke head amp. This setup embarrasses the orange setup my kid was using. Plays loud and clean. So loud you would swear the noise is coming from inside your head. Plays bass guitar good as well even though the box is tuned half an octave too high for thatJustin
I am very pleased with this driver in a small ported 1×10 e-bass cabinet tuned to around 60 hz f3. It's got some lungs, good voicing that is smooth but shows some snarl too when you dig in. The 4 lb weight is impressive. I think this would work also as a small, but effective sub for those who like PA quailities to their indoor systems.meep
It is definitely a good speaker, tipping it's hat to a vintage growl while maintaining a slightly modern upper end. I do wish it had spring or threaded terminals. Much more controlled in its mid definition and forwardness than the Deltalite 2510. Definitely good speaker. Only wishes would be better terminals than the spade type, and maybe aluminum frame.thetenyearplan
13. Eminence Ga10sc6416 10" 16 Ohm Guitar Speaker
Product Details:
Overview tones of 1964 still ring true in this vintage voiced 10 inch speaker by amp guru george alessandro. very balanced with dynamic character, this ceramic 10 inch speaker offers tight, punchy tone with nice warmth, richness, and sparkling highs. features application 10" open or closed back configuration 1, 2, or 4 x 10" low-end response moderate low-end shape tight/punchy mid-range response moderate mid-range shape warm high-end response moderate volume/power loud overall coloration* vintage american ceramic magnet tone in a 10" approved by legendary amp builder, george alessandro. a tight, punchy tone with warmth, richness, and sparkling highs. break-up modes medium power range up to 20 watts instrument* lead/rhythm guitar genre of music* rock, blues, country specifications nomi…
Specifications:
14. Speaker – Jensen Jets, 10 Inch, Falcon, 40w
Product Details:
A very successful and versatile 10”, the falcon 10 adds a new dimension of openness to the classic, fat and warm tone of its 12” version. the seamed cone membrane delivers an unexpected bass response for its 10” size and it is balanced perfectly with its sweet, yet cutting and present high end. guitarist description: warm, straightforward tone with a pronounced low end. when presented with overdrive distortion, it presents some mean fuzz.
Specifications:
| Finish | Black |
| Year | 2022 |
| Made In | Italy |
Reviews:
Holy smoke! I hear 'ya loud and clear, Electric Lightning 10"s! I stuck a pair in my Fender Custom Vibrolux (basically a hot-rodded '63 Vibroverb) which I have rebuilt to 1963 Vibroverb specs. Very true-sounding speakers. Extremely efficient, hardly any cone breakup, and super-tight with a very balanced EQ spectrum. They added significant weight to my amp compared to the stock Eminence AlNiCo speakers, but I'm glad I made the switch!Michael
Just replaced a mix matched set with a quartet of 10" Electric Lightnings in a Super Reverb. While they sounded tight at first, over several days they broke in like gold, both super clean or heavily preamped. The bass response is more round than ever, and with none of the mushiness I have associated many 10" designs. I'm able to run more low than ever and the low E string just sounds fantastic. They are stong/robust sounding, akin to the tone of 12" speakers. The highs really mellowed out and sing like I had hoped Overall the sound is simply huge, clear, and articulate at any volume. I would think any player will see benefits regardless of musical style. Great improvement and speaker!Brad
15. Eminence Legendca104 10-Inch Bass Guitar Speaker, 4 Ohm
Product Details:
Specifications:
Reviews:
I bought two of these several weeks ago to replace the very old drivers in my SWR series II 2-10 cab. Perfect fit. They have an inner seal ring that seals the speaker cutout. I think these must be direct replacements. They look identical. But sound even better. To my ears there is a bit more low end, but the midrange clarity is still there, something I missed when I tried the BP 102 in the same cab. I also tried Faital Pro 10PR300, but not nearly enough low end. The CA-10's passed the test so I purchased 2 more for the other cab. I've been waiting a long time for these. I've used them in live gigs and I'm totally happy with them. Can't beat the price, either.Bassman62
Big fan of Eminence to begin with and these speakers did not disappoint. I have a Hartke 2×10 and bought an empty Hartke 2×10 cabinet. I wanted a more traditional tone to complement the aluminum speakers. I bought the CA10's simply because they seemed to match my desired specs. After purchase I read several posts on various sites that they are NOT recommended for sealed cabinets. Well, mine are sealed and I think they sound great. Not sure what they would sound like in a ported cab but I don't really care. Yes I would recommend these speakers.GEORGE
16. 10" Mid-Bass Loudspeaker | 800 Watts 8-Ohm | Pro-X10mbass | Ds18
Product Details:
During the focused r&d period of perfecting the pro-x line, ds18 identified the opportunity to spawn off another line since there was a division amongst competition audiophiles and concert/"voceteo" audiophiles. therefore, ds18 created the pro audio line, which features a wide variety of midranges that produce concert-like sounds that will knock the wind out of you! the pro m series was designed to give you amazingly loud volume for your midrange frequencies. large ferrite magnet that helps the cca coil take gobs of power punching out pure pro-audio vocals at the highest volume on demand. durable ds18 design that will not only deliver amazing sound quality and volume but have great durability throughout the years to come with high strength cloth surrounds and paper pressed cones.
Specifications:
| Nominal Diameter | 10" |
| Bolt Circle Diameter | 9.84 |
| Power Handling (RMS) | 400 Watts |
| Power Handling (MAX) | 800 Watts |
| Impedance | 8Ω |
| Frequency Response | 80 to 6,300Hz |
| Sensitivity | 96.3dB 2.83V/1m |
| Voice Coil Diameter | 2.5" |
| Resonant Frequency (Fs) | 75.6Hz |
| DC Resistance (Re) | 5.2Ω |
| Voice Coil Inductance (Le) | 9.08mH |
| Mechanical Q (Qms) | 2.82 |
| Electromagnetic Q (Qes) | 0.425 |
| Total Q (Qts) | 0.369 |
| Compliance Equivalent Volume (Vas) | 0.614ft³ |
| Mechanical Compliance of Suspension (Cms) | 0.093mm/N |
| BL Product (BL) | 16.62T·m |
| Diaphragm Mass Inc. Airload (Mms) | 47.5g |
| Maximum Linear Excursion (Xmax) | 10.5mm |
| Surface Area of Cone (Sd) | 362.2cm² |
| Cone Material | Treated Paper |
| Surround Material | Cloth |
| Voice Coil Former | Kapton / Polyimide |
| Basket / Frame Material | Steel |
| Magnet Material | Ferrite |
| Overall Outside Diameter | 10.27" |
| Baffle Cutout Diameter | 9.09" |
| Sealed Volume | 0.5ft³ |
| Sealed F3 | 171.8Hz |
| Vented Volume | 0.88ft³ |
| Vented F3 | 68.8Hz |
Reviews:
Im pushing a 520 watt amp for my Harley and no problems adjusts gains on amp and they crank loudtonc.an.norngltaw
I am very impressed with these speakersnyd-us3
17. Celestion Bl10-100x 10" 100w 8ohm Ceramic Bass Replacement Speaker
Product Details:
Not every player wants a super-clean, high-fidelity bass sound. characterized by an extended low end and greater linear excursion, green label speakers push out every note with a rich, warm tone and a powerful low-end thump. available with ferrite or neodymium magnets, green label speakers are primed for high-powered rock performances, where a full-bodied, warm, defined tone is essential.
Specifications:
| Impedance | 8 ohm |
| Frequency Range | 45Hz to 3,500Hz |
| Depth | 4.2" |
| Weight | 5.3 lbs |
| Sensitivity | 94dB |
Reviews:
Suena genial, el ampli ha pasado a otro nivel
A really great sounding speaker. Strong lows, smooth mids and highs. Very controllable rounded sound.Rockersince77
18. Eminence Legend Ca10-8 10" Bass Guitar Speaker, 8 Ohm
Product Details:
Specifications:
| Nominal Basket Diameter | 10 inches (254 mm) |
| Nominal Impedance | 8 Ohms |
| Watts | 200 W |
| Music Program | 400 W |
| Resonance | 53 Hz |
| Usable Frequency Range | 50 Hz – 3 kHz |
| Sensitivity | 96.3 dB |
| Magnet Weight | 38 oz. |
| Gap Height | 0.312 inch (7.9 mm) |
| Voice Coil Diameter | 2 inches (51 mm) |
| Resonant Frequency (fs) | 53 Hz |
| DC Resistance (Re) | 4.83 Ohms |
| Coil Inductance (Le) | 0.51m H |
| Mechanical Q (Qms) | 6.53 |
| Electromagnetic Q (Qes) | 0.49 |
| Total Q (Qts) | 0.45 |
| Compliance Equivalent Volume (Vas) | 51.05 liters (1.8 cubic ft.) |
| Peak Diaphragm Displacement Volume (Vd) | 105.7 cc |
| Mechanical Compliance of Suspension (Cms) | 0.3 mm/N |
| BL Product (BL) | 10.07 TM |
| Diaphragm Mass Inc. Airload (MMs) | 31 grams |
| Efficiency Bandwidth Product (EBP) | 109 |
| Maximum Linear Excursion (Xmax) | 3.02 mm |
| Surface Area of Cone (Sd) | 350.1 cm2 |
| Maximum Mechanical Limit (Xlim) | 7.0 mm |
| Driver Volume Displaced | 0.043 cubic ft. (1.22 liters) |
| Overall Diameter | 10.5 inches (266.7 mm) |
| Baffle Hole Diameter | 9.01 inches (228.9 mm) |
| Front Sealing Gasket | Yes |
| Rear Sealing Gasket | Yes |
| Coil Construction | Copper voice coil |
| Coil Former | Kapton former |
| Magnet Composition | Ferrite magnet |
| Core Details | Vented and extended core |
| Basket Materials | Die-cast aluminum basket |
| Cone Composition | Paper cone |
| Cone Edge Composition | Cloth cone edge |
| Dust Cap Composition | Treated paper dust cap |
19. Eminence Legend B810 10" Bass Guitar Speaker, 32 Ohm
Product Details:
Surround yourself with thumping bass with this eminence legends bass guitar speaker, featuring a copper voice coil for crystal clear reproduction. this speaker fits in 8 x 10-foot cabinets to deliver quality sound at 49 hz – 5.1 khz so you never miss the lows. a 150w power rating on this eminence legends bass guitar speaker ensures a quality experience.
Specifications:
| Product Type | Stage speaker driver |
| Speaker Type | Passive |
| Speaker Diameter | 10" |
| Continuous Power | 150 Watt |
| Peak Power | 200 Watt |
| Frequency Response | 49 – 5100 Hz |
| Nominal Impedance | 32 Ohm |
| Sensitivity | 92.7 dB |
| Diaphragm Type | Paper cone |
| Magnet Type | Ferrite |
| Driver Details | Speaker driver: woofer driver – 10" – ferrite – paper |
| Recommended Enclosures | Ported – 1.6 – 2.7 cubic feet Sealed – 0.5 – 1.24 cubic feet |
| Diameter | 10.1 in |
| Width | 10.1 in |
| Depth | 4.1 in |
| Weight | 6.7 lbs |
| Diameter | 9.1 in |
| Service & Support | Limited warranty – parts and labor – 7 years |
Reviews:
20. Celestion G10 Vintage 10" Guitar Speaker (8 Ohm)
Product Details:
This 10" 60w ceramic magnet speaker has been voiced to produce the unmistakable celestion vintage tones. pushed hard it has plenty of growl and performs with very solid bass, muscular mids, and an extremely articulate top end. in addition, the g10 vintage employs a 1.75" round copper voice coil, has a frequency range of 100-5500hz, and sensitivity of 97d b (1w @ 1m). golden sand finish. the g10 vintage is the natural evolution of the well-respected vintage 10. closer to the sound of the vintage 30 than its predecessor, the g10 vintage still maintains a distinctive tonal flavor of its own. all of these speakers use the same voice coil designs and similar ceramic magnet structures to achieve their familiar, hard-rocking celestion sound.
Specifications:
| Nominal diameter | 10 inch, 254mm |
| Power Rating | 60W |
| Nominal impedance | 8 Ohms and 16 Ohms |
| Sensitivity | 97dB |
| Chassis type | Pressed Steel |
| Voice coil diameter | 1.75 inches, 44.5mm |
| Voice coil material | Round copper |
| Magnet type | Ceramic |
| Magnet weight | 31oz, 0.88kg |
| Frequency range | 100-5500Hz |
| Resonance frequency, Fs | 115Hz |
| DC resistance, Re | 7.47 Ohms & 12.33 Ohms |
| Diameter | 10.1 inches, 256mm |
| Overall depth | 4.1 inches, 104mm |
| Magnet structure diameter | 5.3 inches, 134mm |
| Cut-out diameter | 9.0 inches, 229mm |
| Mounting slot dimensions | 0.2 x 0.3 inches, 6 x 8mm |
| Number of mounting slots | 4 |
| Mounting slot PCD | 9.6 inches, 245mm |
| Unit weight | 5.3lb, 2.4kg |
Reviews:
I recently bought a 20+ year old Marshall Valvestate VS30R. The stock speaker, a 30w, 4 ohm Made-for-Marshall Celestion "Goldback", was nothing short of unimpressive. The amp sounded like just another generic solid stater. Deciding on an upgrade I browsed the AMS selection of replacement speakers & found this little gem. I browsed the web to see what other were saying about it & found no negative impressions whatsoever. I have since installed it & begun the process of "breaking it in". This speaker kicks butt. Installing a 60w speaker in a 30w amp gives it a world of clean headroom. Playing "clean" or with my 'Distortion +' the tone was full & quite bright when using the bridge pickup (on an Ibanez Destroyer DT520FM also purchased from AMS). A new speaker can make a WORLD OF DIFFERENCE. This one sure did. I love it.
Love it. It was a great upgrade to an already great amp. I use my small, yet powerful, amp for small shows, practice and church. It just needed a little more authentic bottom end because I tend to push the amp hard during shows. I did the research prior to my purchase and found that the "pro joes" recommend this speaker for a dynamic, vintage sound.Scott Free
Related posts:
- 12 Bass Guitar Speaker For Sale (2024 Update)
- 120 Watt Guitar Amp For Sale (2024 Update)
- Speaker Cable Guitar Amp For Sale (2024 Update)
- Guitar Amp And Cord For Sale (2024 Update)
- Guitar Amp Speaker Cable For Sale (2024 Update)
- Guitar Amp Speaker Cable Extension For Sale (2024 Update)
- Kalos By Cecilio Electric Guitar For Sale (2024 Update)
- Sparkly Pink Electric Guitar For Sale (2024 Update)
- Speaker For Bass Guitar For Sale (2024 Update)
- Using Bass Amp For Guitar For Sale (2024 Update)
