Are you looking for the Acoustic Guitar Neck Blanks? If so, you’ve come to the right place.
Choosing the Acoustic Guitar Neck Blanks can be difficult as there are so many considerations, such as WD Music, Fender, Stewart-MacDonald, ammoon, Solo Guitar, Muslady. We have done a lot of research to find the top 20 Acoustic Guitar Neck Blanks available.
The average cost is $88.22. Sold comparable range in price from a low of $12.49 to a high of $175.69.
Based on the research we did, we think mgb Guitars Neck Blank is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Acoustic Guitar Neck Blanks (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
$32.50
Features:
- 22 3/4 inch overall length
- 1 3/8 inch width at nut
- 1 5/8 inch width at bottom
$134.95
Features:
- Acoustic set neck walnut model 25.4 25.4 scale by penta guitarworks made in the usa ****** please note: this product may take up to 10 working days until it ships…
$159.95
Features:
- Acoustic set neck model 25.4 / 5 piece laminate mahog flamed maple 25.4 scale by penta guitarworks made in the usa ****** please note: this product may take up to…
$175.00
Features:
- Used, guild neck blank with the trust rod for a 12 fret acoustic guitar. mint condition, factory neck piece. please ask any questions prior to purchase, thank you!…
$45.00
Features:
- Genuine mahogany guitar neck blanks (exotic wood).
- Mahogany is an exotic wood that varies considerably in color.
$56.07
Features:
- Description: designed for acoustic guitar luthier tool. made of mahogany material, durable and long service life. elegant appearance and high quality. unfinished guitar neck with smooth surface and exquisite workmanship….
$12.49
Features:
- 40'/41''/42' acoustic guitar neck replacement unfinished guitar diy fretboard mahogany guitar…
$39.99
Features:
- Buy quality guaranteed black walnutguitar neck blanks with free shipping from best musical luthier tonewood's supplier in usa.fairly easy to work with both hand and machine tools, though slightly more…
$159.95
Features:
- Acoustic set neck walnut / flamed maple / walnut with v dovetail and matching neck block note: these are not guaranteed to work with other brands of neck blocks. headstock…
$119.95
Features:
- Sapele acoustic parlor neck model p12 24.9 scale 12 fret mount by penta guitarworks made in the usa ****** please note: this product may take up to 10 working days…
$175.69
Features:
- Traditional hardwood for guitarmaking long used in building classical guitars, spanish cedar carves and works very much like mahogany. its stability and tonal qualities are also like mahogany. the fragrance…
$99.99
Features:
- This solo guitar neck is intended as a replacement or diy project. it's fully customizable due to the blank headstock to allow for custom shaping and design. this neck also…
$114.95
Features:
- Acoustic neck blank model 25.4 hard maple a stock (minimal figure) 25.4 scale by penta guitarworks made in the usa ****** please note: this product may take up to 10…
$60.00
Features:
- The look, feel and sound of the guitar from the golden age. w: 4 1/2′′l: 30′′ 1.5"…
$134.95
Features:
- Acoustic set neck now with v dovetail and matching neck block note: these are not guaranteed to work with other brands of neck blocks. wings glued on each side of…
$15.99
Features:
- Custom order lp guitar neck blank headstock maple with maple 24 frets black inlay…
$59.99
Features:
- Buy quality guaranteed bocote / quarter sawn maple guitar neck blanks / with free shipping from best musical luthier tone wood's supplier in usa.fairly easy to work with both hand…
$32.00
Features:
- Genuine mahogany quartersawn neck blanks for electric guitars. for use in guitarbuilding. specie – swietenia macrophylla dimensions – 15/16" x 4" x 29" cut type – quartersawn material is planed…
$44.99
Features:
- Buy quality guaranteed bloodwood/ quarter sawn maple guitar neck blanks with free shipping from best musical luthier tonewood's supplier in usa.fairly easy to work with both hand and machine tools,…
$89.99
Features:
- This solo guitar neck is intended as a replacement or diy project. it's fully customizable due to the blank headstock to allow for custom shaping and design. this neck also…
1. Mgb Guitars Neck Blank
Product Details:
This part is perfect for those wanting a nicely shaped neck blank for building their own neck. the okume body is shaped and ready for the application of a fret board. can be used with a wide assortment of scale lengths from 23-27 inches or more. the head stock is covered with sapelli veneer. includes easily removable hanger bolt with hardware. always use an mgb reinforcement plate to strengthen neck to body joint. dimensions: 22 3/4 inch overall length 1 3/8 inch width at nut 1 5/8 inch width at bottom 16 3/4 overall flat length for fret board 3/4" neck thickness 1 3/4 heel height 2 3/4 by 4 inch head stock 5/8 inch thick head stock perfect for mgb tuners
2. Ohio Walnut Acoustic Neck Blank — Call It Your Own
Product Details:
Acoustic set neck walnut model 25.4 25.4 scale by penta guitarworks made in the usa ****** please note: this product may take up to 10 working days until it ships out depending on our backlog you get a 1.5 degree shoulder cut in, leaving the tenon oversized at 1 7/8" wide by 3 3/4" high and 1" long so that you can make your own dovetail or bolt-on the size that you need. you also get a rounded shank, a volute behind the nut, an 11 degree pitched headstock, this model will come with wings glued on each side of the headstock unless you request the headstock to be one piece a truss rod slot with the pocket hole, ready for the nut, these blanks are made in barberton, oh, usa, please note measurements are within 1/32 of an inch. 1 3/4" at the nut and 2 3/16" at the body. note: the bottom 1 7/8" of the heel is glued on.
3. Acoustic Neck Blank-Yourchoice — Call It Your Own
Product Details:
Acoustic set neck model 25.4 / 5 piece laminate mahog flamed maple 25.4 scale by penta guitarworks made in the usa ****** please note: this product may take up to 10 working days until it ships out depending on our backlog you get a 2 degree shoulder cut in, leaving the tenon oversized at 1 7/8" wide by 3 3/4" high and 1" long so that you can make your own dovetail or bolt-on the size that you need. you also get a rounded shank, a volute behind the nut, an 15 degree pitched headstock, this model will come with wings glued on each side of the headstock a truss rod slot with the pocket hole, ready for the nut these blanks are made in barberton, oh, usa, please note measurements are within 1/32 of an inch. 1 3/4" at the nut and 2 3/16" at the body. the stripes on the 5 piece models are about 1/16" wide and are set about 3/8" apart. . froo www.froo.com | froo cross sell, free cross sell, cross promote, ebay marketing, ebay listing apps, ebay apps, ebay application
4. Guild 12 Fret Neck Blank Mahogany 2002
Product Details:
5. Genuine Mahogany Guitar Neck Blanks
Product Details:
1-3/16" x 4" x 30" – genuine mahogany guitar neck blanks (exotic wood) – mahogany is an exotic wood that varies considerably in color. it may be yellowish, reddish, pinkish, or salmon colored when freshly cut, maturing into a deep rich red or brown color with age. exposure to strong sunlight may cause some fading. the wide variability in color has enabled many look-alike species to be marketed as mahogany. mahogany is very popular and is often used as the standard when describing other species. hardness and weight are rated as moderate, and density is high.
6. Set Of 3, Blank Mahogany Guitar Neck Replacement Fretboard Diy Accessories, Brown
Product Details:
Description: designed for acoustic guitar luthier tool. made of mahogany material, durable and long service life. elegant appearance and high quality. unfinished guitar neck with smooth surface and exquisite workmanship. suitable for diy accessories or replacement parts. specification: material: mahogany wood length: approx. 560mm / 22.05inch width: approx. 70mm / 2.76inch
Specifications:
| Length | Approx. 560mm / 22.05inch |
| Assembled Product Dimensions (L x W x H) | 0.39 x 0.39 x 0.39 Inches |
7. 40'/41''/42' Acoustic Guitar Neck Replacement Unfinished Guitar Diy Fretboard Mahogany Guitar
Product Details:
8. Black Walnut Guitar Neck Blanks
Product Details:
Buy quality guaranteed black walnutguitar neck blanks with free shipping from best musical luthier tonewood's supplier in usa.fairly easy to work with both hand and machine tools, though slightly more difficult than soft maple due to hard maple’s higher density.common name(s): limba, black limba, white limba, korina, afarascientific name: juglans nigraexcellent for guitar necks, musical instruments, turningscommon uses: black walnut guitar neck blanks can be used in a variety of ways. such as to make guitar necks, banjo necks, mandolin necks, fiddle necksair dried for more than one year, moister content : 9%our products are defect-free and we guarantee 100% product satisfaction. we are happy to answer your queries to serve you better. if for any reason you are not happy with your selection we offer a 100% money back guarantee! *this sale prices is for one piece, picture is for representational purpose only, you will get a similar product
9. Acoustic Neck Blank / Walnut / Flamed Maple / Penta Guitarworks
Product Details:
Acoustic set neck walnut / flamed maple / walnut with v dovetail and matching neck block note: these are not guaranteed to work with other brands of neck blocks. headstock adjustment will be at the sound hole, so if you need it at the headstock, please let us know when you order. scale size 25.34 and mounts at the 14th fret you may need to make and use shims for proper alignment depending on the thickness of your sides. by penta guitarworks made in the usa ****** please note: this product may take up to 10 working days until it ships out depending on our backlog you get a 2 degree shoulder cut v dovetail and matching block, 1 3/4"w at the nut and 2 3/16 at the 14th fret where it joins the body. other neck widths are available upon request. the heel is 3 3/4"high. you also get a rounded shank, a volute behind the nut, an 11 degree pitched headstock that is 7 5/8"l from the nut and 3 5/8”w, these blanks are made in barberton, oh, usa, please note measurements are within 1/32 of an inch. . froo www.froo.
10. Acoustic Parlor Neck Blank Model P12 Sapele
Product Details:
Sapele acoustic parlor neck model p12 24.9 scale 12 fret mount by penta guitarworks made in the usa ****** please note: this product may take up to 10 working days until it ships out depending on our backlog 1.5 degree shoulder cut in, leaving the tenon oversized at 1 7/8" wide by 3 3/4" high and 1" long so that you can make your own dovetail or bolt-on the size that you need. you also get a rounded shank, a volute behind the nut, an 11 degree pitched headstock, this model will come with wings glued on each side of the headstock a 1/4"w x 7/16" truss rod slot flat on the bottom. if you are adjusting the truss rod from the head stock and need it with the pocket hole cut into the head stock, let us know when you order and we will cut it in at no extra charge. other wise, it will be assumed that you are adjusting it from the sound hole and will be shipped without the pocket hole cut in. these blanks are made in barberton, oh, usa, please note measurements are within 1/32 of an inch. headstock is 3" wide an
11. Stewmac Spanish Cedar Neck Blank For Acoustic Guitar
Product Details:
Traditional hardwood for guitarmaking long used in building classical guitars, spanish cedar carves and works very much like mahogany. its stability and tonal qualities are also like mahogany. the fragrance will remind you of a new martin guitar (their linings are spanish cedar). not cedar, not from spain despite its name, spanish cedar is a hardwood from the same family as mahogany. it was used to build martin and other parlor guitars from the 1850s until around 1916. those builders switched to mahogany when it became easier to obtain, but they still use spanish cedar, especially for necks. now big enough for two necks! quartersawn and kiln dried, our one-piece neck blanks are carefully selected for grain and color. sized for an acoustic or archtop neck.
12. Solo Lp Style 22 Fret Guitar Neck With Rosewood Fretboard & Blank Headstock
Product Details:
This solo guitar neck is intended as a replacement or diy project. it's fully customizable due to the blank headstock to allow for custom shaping and design. this neck also comes without pre-drilled machine head holes or fret markers but does have side dot inlays. neck specifications may have a +/- 1 or 2mm variance. if using this neck with a non solo body / solo hardware, slight modifications may be necessary in order to achieve a proper fit. specifications maple neck blank headstock to allow for custom shaped headstocks (6-3/4′′ x 3-3/4′′) no pre-exsisting machine head holes no fretboard inlays to allow for customization rosewood fretboard 12′′ fretboard radius 22 frets 24 3/4′′ scale length thickness at 12th fret: 15/16′′ width at 12th fret: 2 1/16′′ thickness at nut: 13/16′′ width at nut: 1 5/8′′ item shown: solo lp style 22 fret guitar neck with rosewood fretboard & blank headstock model #: sl-lpnrw-blnk upc: 0842561012234
Specifications:
| Fretboard | Rosewood |
| Fretboard Radius | 12" |
| Frets | 22 Frets |
13. Maple 25.4 Acoustic Neck Blank A Stock
Product Details:
Acoustic neck blank model 25.4 hard maple a stock (minimal figure) 25.4 scale by penta guitarworks made in the usa ****** please note: this product may take up to 10 working days until it ships out depending on our backlog. you get a 1.5 degree shoulder cut in, leaving the tenon oversized at 1 7/8" wide by 3 3/4" high and 1" long so that you can make your own dovetail or bolt-on the size that you need. you also get a rounded shank, a volute behind the nut, an 11 degree pitched headstock, one piece headstock a 1/4"w x 7/16" truss rod slot flat on the bottom. if you are adjusting the truss rod from the head stock and need it with the pocket hole cut into the head stock, let us know when you order and we will cut it in at no extra charge. other wise, it will be assumed that you are adjusting it from the sound hole and will be shipped without the pocket hole cut in. these blanks are made in barberton, oh, usa, please note measurements are within 1/32 of an inch. 1 3/4" at the nut and 2 3/16" at the body. not
14. Tempered Maple Neck Blank – Guitar – Flat-Cut – 1.5"
Product Details:
15. Acoustic Neck Blank/domestic Cherry 25.4
Product Details:
Acoustic set neck now with v dovetail and matching neck block note: these are not guaranteed to work with other brands of neck blocks. wings glued on each side of the headstock. headstock adjustment will be at the sound hole, so if you need it at the headstock, please let us know when you order. we will need to know from you when you order, via note or message through ebay, the choice of wood:hard nonfigured maple, medium flamed maple, genuine mahog, or walnut. scale size will be 25.4 and will mount at the 14th fret unless you contact us for a change when you order. this mode comes with wings glued on each side of the headstock. you may need to make and use shims for proper alignment depending on the thickness of your sides. by penta guitarworks made in the usa ****** please note: this product may take up to 10 working days until it ships out depending on our backlog 1.5 degree shoulder cut v dovetail and matching block, 1 3/4"w at the nut and 2 1/4 at the 14th fret where it joins the body. the heel is
16. Custom Order Lp Guitar Neck Blank Headstock Maple With Maple 24 Frets Black Inlay
Product Details:
17. Bocote Guitar Neck Blanks
Product Details:
Buy quality guaranteed bocote / quarter sawn maple guitar neck blanks / with free shipping from best musical luthier tone wood's supplier in usa.fairly easy to work with both hand and machine tools, though slightly more difficult than soft maple due to hard maple’s higher density.all my maple neck blanks are quarter-sawn.turns, glues, and finishes wellcommon name(s): bocotescientific name: cordia spp.excellent for guitar necks, musical instruments, turningscommon uses: they can be used for the making of guitars, other stringed instruments, furniture, other woodworking projectsair dried for more than one year, moister content : 9%our products are defect-free and we guarantee 100% product satisfaction. we are happy to answer your queries to serve you better. if for any reason you are not happy with your selection we offer a 100% money back guarantee! *this sale prices is for one piece, picture is for representational purpose only, you will get a similar product
18. Genuine Mahogany Electric Guitar Neck Blanks
Product Details:
19. Bloodwood Guitar Neck Blanks
Product Details:
Buy quality guaranteed bloodwood/ quarter sawn maple guitar neck blanks with free shipping from best musical luthier tonewood's supplier in usa.fairly easy to work with both hand and machine tools, though slightly more difficult than soft maple due to hard maple’s higher density.common name(s): bloodwood, satinescientific name:brosimum rubescens (syn. b. paraense)common uses: bloodwood guitar neck blanks are a popular choice for guitar builders because of their unique look and sound. they are typically used in acoustic guitars, but they can also be used in electric guitars. bloodwood is a strong wood that is resistant to warping, making it a good choice for guitar necks. it has a rich, warm tone that is perfect for acoustic guitars.air dried for more than one year, moister content : 9%our products are defect-free and we guarantee 100% product satisfaction. we are happy to answer your queries to serve you better. if for any reason you are not happy with your selection we offer a 100% money back guarantee!common uses: a guitar neck blank can be used for a variety of purposes, including as the neck for a custom guitar or as a replacement part for an existing guitar. guitar neck blanks can also be used to create custom inlays or other decorative features on a guitar. *this sale prices is for one piece, picture is for representational purpose only, you will get a similar product
20. Solo St Style 21 Fret Guitar Neck With Rosewood Fretboard & Blank Headstock
Product Details:
This solo guitar neck is intended as a replacement or diy project. it's fully customizable due to the blank headstock to allow for custom shaping and design. this neck also comes without pre-drilled machine head holes or fret markers but does have side dot inlays. neck specifications may have a +/- 1 or 2mm variance. if using this neck with a non solo body / solo hardware, slight modifications may be necessary in order to achieve a proper fit. specifications maple neck blank headstock to allow for custom shaped headstocks (6-3/4" x 3-3/4") no pre-exsisting machine head holes no fretboard inlays to allow for customization rosewood fretboard 12′′ fretboard radius 21 frets 25.5′′ scale length thickness at 12th fret: 15/16′′ width at 12th fret: 2 1/16′′ thickness at nut: 13/16′′ width at nut: 1 5/8′′ item shown: solo st style 21 fret guitar neck with rosewood fretboard & blank headstock model #: sl-stnrw-blnk upc: 0842561012227
Related posts:
- Guitar Neck Thickness Comparison For Sale (2024 Update)
- Neck Through Bass Guitar For Sale (2024 Update)
- Bass Guitar Black And White For Sale (2024 Update)
- Electric Guitar Bluetooth Transmitter For Sale (2024 Update)
- Electric Guitar Without Pick For Sale (2024 Update)
- Double Neck Guitar Gig Bag For Sale (2024 Update)
