Guitar Neck Thickness Comparison For Sale (2024 Update)

Genuine fender stratocaster guitar maple neck features a comfortable "modern c" profile and 9.5"-radius rosewood or maple fingerboard with 21 medium jumbo frets. also includes standard truss rod and pre-slotted synthetic bone nut. tinted satin urethane fi – fingerboard: maple – number of frets: 21fret size: medium jumbo – neck shape: modern "c"neck material: maple – neck finish: satin urethane on back of neck, gloss on face of headstock – fingerboard radius: 9.5" (241mm)scale length: 25.5" (648mm)nut material: synthetic bone (melamine)nut width: 1.650" (42mm)position inlays: white dot3/16" truss rod adjustment nut (at headstock)6 pre-drilled tuning machine holes with 2-guide pin holes for each tuning machine – each neck is serialized and stamped during quality inspection – walnut "skunk" stripe on back of neck – fender logo with "original contour body" decal

Recently was installed an american special that the neck's frets had been worn down. this neck is a 2020 with minimal fret wear (does have a little, but i would say retains 90 percent of original life). does include tuners.

Details: fret: cupronickel nut: abs dimension information tuner hole: 10mm width at nut: 42mm with at heel: 57.5mm( 0.5 mm deviation) thickness at heel: 27mm truss rod: two-way adjustable, 4mm allen wrench adjustable truss rod has been installed at the headstock. neck wood: maple frets: 22 frets

The original bolt on aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. it is designed to be an aftermarket fit with most stratocasters, telecasters, and jazzmasters. it comes with everything you need to replace your current neck with one from rgi. necks are built to order with your specifications, so expect up to a two month wait before receiving your neck. neck specs: material: 6061 solid billet aluminum scale: 25.5” nut width: 1 11/16” weight: solid billet: 3 lbs 3 oz, hollow richlite: 2 lbs 2 oz frets: 22 stainless steel medium/medium fretboard radius: 12” tuners: 3+3 sperzel locking nut: 6061 aluminum (cut for heavy gauge strings)(0.013", 0.020", 0.024", 0.035", 0.046", and 0.056") or cut to your specific gauges if specified heel pocket: fender strat style (5/8” deep, 2.18” heel width, 3” total length, 5” radius heel curve) thickness: .700” at nut, .725” at 7th fret, .740” at 12th fret .760” at 15th fret neck shape: very flat u shape, maximum thinness without structural loss, no tapered heel includes: 4 stainless steel 1 1/2 “ 10-24 mounting bolts, backplate, buffing compound, and 2 microfibre cloths frequently asked questions why aluminum? when looking for a neck, there are a lot of different variables to look at. structurally, a solid billet of aluminum will offer the most rigidity of the option possible. there is no truss rod or other materials to stress and strain during temperature or moisture changes. additionally, that additional strength can help with the wear and tear of tour, stages, and other bumps and bruises any guitar will have to sustain during it’s lifespan. sonically, the density of aluminum may give you an advantage with more sustain and over tones, since the neck won’t sympathetically vibrate with the strings. this is, as with anything, certainly up for debate as to what your ears hear and your hands feel. it’s worth noting that it will feel colder to the touch since aluminum is a better thermal conductor than wood, and it does noticeably weigh more. will this fit my guitar? yes: for the most part, if you’re running a telecaster, stratocaster, or jazzmaster, you should be able to bolt this neck directly onto the body. maybe not: if you are running a t-60, jaguar, mustang, or 72’ telecaster deluxe; you cannot run this neck without modifications due to scale and bolt pattern restrictions. if you are confused and unsure, contact a local luthier to help you with your project. it’s a worthy profession to support and you’ll learn new things. if you are considering a guitar not mentioned here, then i’m not sure. can i do the change over myself? yes: most seasoned guitarist can probably do this, yes. but read this: i have pre-drilled the necks and they are tapped with machine bolts. you may have to adjust neck angle, saddle heights, and intonate your guitar afterwords. if your action is still too loose for your preference, a luthier can help you with adjusting the nut string depths to a tighter playing style. the depths are set fairly high to allow for adjustment after installation. what is the 700 series? the 700 series is the first set of necks that i designed, named after the thickness at the nut for the design. i will be continuing this convention for each style going forward, so anything with this thickness will be in the 700 series, and further designs may be in a new series for their specific design requirements. can i get something custom? short answer, yes: i can make a neck for any project. in the recent past i’ve also made custom guitars, hand-wired tube amps, cabs, a few different pedals and even a pickup. custom, multiple runs: if you are a guitar builder and are interested in ordering a batch of necks custom fit and finished for your company or brand, please reach out. i can offer discounts for custom work at scale. fully custom, one-off builds: if you have your sights set on something fully custom, i’d be glad to chat with you about your needs. this process is expensive. the new neck would need to be prototyped, engineered, manufactured, and then finished, all with processes and measurements outside of my normal set-up. you’d be looking at at least a handful of months and a starting price around $5,000. can i get mine cheaper? faster? no affirm asked me to add this, if you use affirm please read this or something like that if you finance with affirm and if one or more items in your order has an extended ship date, your loan payment(s), including interest, may be due before the

1. this guitar neck is compatible for fender st-style electric guitar neck replacement. 2. high-quality maple neck, delicate and unique. 3. fingerboard with 22 frets, smooth and high density. 4. adjustable truss rod has been installed at the headstock. 5. the hole for the tuning machine is 10mm in diameter. p descriptions: br / frets: 22 frets br / neck: canadian maple neck br / fingerboard: rosewood br / nut: 42mm nut br / back midline: rosewood br / color: matte yellow br / peg holes diameter: 10 mm / 0.4 inch br / neck length: 665mm / 26.18 in br / heel width: 56mm/2.2in br / heel depth: 20mm-26mm(with fingerboard) br / neck weight: 590g/20.8oz – package included: br / 1*guitar neck /p

Yinfente brand electric guitar neck, maple wood body & rosewood fretboard. high quality wood materi

Allparts smnf-c replacement neck for stratocaster is “officially licensed by fender” and made to exacting quality standards in japan. offering a modern 10” fingerboard radius, 21 vintage-tall frets, and over-sprayed with a vintage-tinted nitrocellulose finish, our smnf-c model offers a great combination of vintage aesthetics and modern playability. allparts smnf-c 21-fret maple strat neck features 21 vintage tall frets .074" x .053" classic c shape, one piece maple neck with 10" radius classic 1-5/8" nut width heel width 2-3/16" vintage tuning peg hole diameter .340" truss rod adjustment at the heel neck thickness .86" at first fret, .96" at twelfth fret

Nothing much to say, just an s neck in worn, but usable, condition. great for a partscaster project. it should fit any standard 25.5" s-style or jazz style guitar.the frets still have a good amount of life in them. neck seems relatively straight, and the truss rod does still have some room to move. there is some tear out on the heel but it has been glued and is stable. i am including the black tuners and string trees. priced to sell. sold "as described." no returns.got questions? shoot me a message, i love nerding out with other gearheads!

Wd angled paddle headstock 22 fret neck for fender stratocaster 22 fret neck pocket paddle headstock neck for guitar, unfinished, angled headstock, fits strat neck pocket, 22 fret, 12 in. radius, double action truss rod adjusts at headstock, position markers of both sides of fingerboard. all necks require a final level, crown, and polish and may need to be fine-tuned to your instrument and playing preferences. due to the organic nature of wood each neck is considered unique and may have minor variations in grain or finish from those pictured. wd does not sell what is commonly referred to as seconds or blems. wd neck heels are made to fender usa dimensions and tolerance, this may not account for neck pocket shrinkage or expansion over time. some neck pocket modification may be required.

Other items feedbacks about us contact us auction title will be here! suitable for diy electric guitars amateur fit diy electric guitar or neck replacement electric guitar neck features: neck wood: natural mahogany wood fretboard wood: natural rose wood inlay: dot inlaid scale length: 24.75 inch nut width: about 42mm width at heel: 56mm+-0.5mm frets: 22nickel/silver frets truss rod adjust: at headstock or bottom payment we appreciate quick payment and look forward to helping you with your musical instrument needs in the future. payment method: accept the following forms of payment via our secure system: paypal (visa, master, american express, discover, debit, and bank transfer) credit / west union credit / west union: please contact us if you like the in this way to pay. we recommend you by the paypal. checkout: after winning an item in an auction or a "buy it now" purchase, click on the checkout now button to immediately proc

Excellent condition warmoth strat neck:modern construction:unfinished roasted maple:jumbo 6100 frets:59 roundback profile:graphtech nut:10mm tuner holes (drilled by warmoth )no tuner screw holes or tree holes:i used hipshot ump staggered tuners:used for a couple weeks, plays great, decided to go with a rosewood board:no dents or dings, just a beautiful neck:

Tl electric guitar neck 6 string guitar neck zebra wood matte 5.6cm width guitar neck 21 fret for

Neck for electric guitar type strato 70 material:maple/roosewood( maple) different configurations available: 12 radius vintage frett- medium jumbo frett-jumbo frett. also available with polyurethane finish, nitro. on request it is possible to make customizations -fast shipping- italy: 1-2 working days europe: 2-3 working days usa: 3-5 working days the photos are for illustrative purposes only on request you will receive photographs of the work in progress. for any information doubts or perplexities please contact us. we ask you if it could happen to respond to the message during the production phase, it is necessary at the end of the work otherwise it will be a tacit confirmation to complete work and shipping times. it is the basis of respect for our work, time and materials that we buy. we do not accept refunds and returns, we take several hours of work and that is why we ask you to contact us for any doubt. thank you.

This solo guitar neck is intended as a replacement or diy project. neck specifications may have a +/- 1 or 2mm variance. if using this neck with a non solo body / solo hardware, slight modifications may be necessary in order to achieve a proper fit. this neck is unfinished and comes pre-sealed with a poly-resin sealer. features maple neck rosewood fretboard 12′′ radius 21 frets 2-way truss rod mop dot inlays & side markers 25 1/2′′ scale length nut width: 1 5/8′′ thickness at nut: 13/16′′ thickness at 12th fret: 15/16′′ width at 12th fret: 2 1/16′′ item shown: solo st style 21 fret guitar neck with rosewood fretboard model #: sl-stnrw21h-u upc: 0787392886756

Description suitable for diy electric guitars amateur electric guitar neck features: 1x electric guitar neck . 42mm nut neck wood: mahogany wood fretboard wood: rosewood finish: unfinished inlay: dot inlaid side dots: left side dots scale length: 25.5inch. 648mm if you need other scale length please contact me. frets: 24 nickel/silver frets truss rod adjust: at headstock or bottom payment we appreciate quick payment and look forward to helping you with your musical instrument needs in the future. payment method: accept the following forms of payment via our secure system: paypal (visa, master, american express, discover, debit, and bank transfer) credit / west union credit / west union: please contact us if you like the in this way to pay. we recommend you by the paypal. checkout: after winning an item in an auction or a "buy it now" purchase, click on the checkout now button to immediately proceed with the checkout and payment process. you will be directed to our

Description: not bent,durable material. -finished,the edges with accurate flatness. the notched straightedge has become a standard for evaluating fingerboards. the notches fit right over the frets,so you can check the straightness of the fingerboard itself. stainless steel is a important material for measuring tool and much better than other soft material. edge is notched for long scale,the other edge is for short scale. material: stainless steel

Bullet points: 1. for st electric guitar, great replacement for your st guitar. 2. 10mm head machine peg holes for tuner installation. 3. adjustable truss rod has been installed at the headstock. 4. canadian maple wood makes the sound more loud and clear. 5. with inlay dots on the side, it is convenient to distinguish the corresponding fret. descriptions: frets: 22 frets neck: canadian maple neck fingerboard: canadian maple peg holes diametre: 10 mm / 0.4 inch neck length: 66.5cm / 26.2 in neck depth: approx. 15 mm / 0.6 in (with fretboard 2.3 cm / 0.9 in) heel depth: approx. 2.0 cm / 0.8 in (with fretboard 2.6 cm / 1.0 in)

This solo guitar neck is intended as a replacement or diy project. neck specifications may have a +/- 1 or 2mm variance. if using this neck with a non solo body / solo hardware, slight modifications may be necessary in order to achieve a proper fit. this neck comes with a satin finish. features roasted maple neck roasted maple fretboard 12′′ radius 22 frets 2-way truss rod mop dot inlays & side markers 25 1/2" scale length nut width: 1 5/8′′ thickness at nut: 13/16′′ thickness at 12th fret: 15/16′′ width at 12th fret: 2 1/16′′ item shown: solo st style 22 fret roasted maple guitar neck model #: sl-stn22-rm-f upc: 842561010407

Build a spectacular, one-of-a-kind guitar neck! no two pieces of these birdseye maple electric guitar neck blanks are the sameyour build will have its own unique look and sound. this stewmac electric guitar neck blank is made of rock hard canadian maple (acer saccharum).

St guitar neck big headstock maple with maple black square inlay 22 frets replacement neck no frets