Are you looking for the Best Power Conditioner For Guitar Amp? If so, you’ve come to the right place.
Choosing the Best Power Conditioner For Guitar Amp can be difficult as there are so many considerations, such as APC, Furman, Pro Co Sound, AtlasIED, Neutrik, Panamax, SurgeX. We have done a lot of research to find the top 20 Best Power Conditioner For Guitar Amp available.
The average cost is $442.52. Sold comparable range in price from a low of $86.93 to a high of $2299.95.
Based on the research we did, we think Furman M-8Dx Power Conditioner is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Power Conditioner For Guitar Amp (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
|
$219.95$109.95
4.8
Features:
- Ac noise filtering to reduce radio frequency and electromagnetic interference (rfi/emi)surge protection
- Spike & surge protection ensures equipment stays safe and your power stays clean9 total outlets
- 8 rear panel outlets and 1 front panel convenience outletdigital voltmeter
Features:
- Perfect (no issues)cosmetic condition
- 8/10 (moderate signs of use overall)includes
- Power conditioner onlyitem #
$290.85
4.8
Features:
- Panel discussions
- Fundraisers
- Religious events
Reviewers Noted:
Ease of setup
Features:
- Six sequenced rear panel outlets (in 3 groups), two unswitched rear panel outlets, and one front panel unswitched outlet.
- Momentary and maintained sequencing via rear panel terminal block or front panel switch (momentary only).
- Standard level ac protection and filtering. 15 amp rating.
Features:
- 15 amp capacity required -output.
- 11-15 amps rms (maximum, all outlets combined.
- Continuous) -linear noise attenuation: trans.
Features:
- Furman's exclusive smp technology provides the highest level of surge & spike protection available.
- Isolated outlet banks minimize inter-component interference and noise contamination.
- 15 amp rating featuring a high inrush magnetic circuit breaker for added protection.
$2299.95
5.0
Features:
- Symmetrical balanced power with dual-screen technology
- Discrete power banks eliminate inter-component interference
- Power factor technology provides surplus current for power-starved amplifiers
$499.95
5.0
Features:
- Panel discussions
- Fundraisers
- Religious events
$199.00
5.0
Features:
- Confidence inspiring power.
- High-end filtering.
Features:
- Linear noise filtration technology (lift) to keep hums and pops out of your performance
- Extreme voltage shutdown protection (evs) for protection from power spikes
- Built-in pull out lights for low lit venues
$86.93
4.6
Features:
- Single-space rack mount for easy integration
- 9 outlets for even distribution of power to all conneted devices
Features:
- Smp+ provides the highest level of protection available
- Lift significantly reduces ac line noise
- Ev.s. protects equipment from dangerous overvoltage conditions
Features:
- Pg-90 filtering technology
- Panasonic and wima capacitors
- Eight rear switched, filtered, and surge protected outlets
Features:
- Panel discussions
- Fundraisers
- Religious events
$341.52
4.8
Features:
- Panamax max m5400 pm home theater power conditioner 120v ac 1500va. panamax protection max 5400 power management.
- 11 outlets regulates voltage.
$842.10
4.8
Features:
- General
- Line voltage: 240 (volts)
- Ac protection
Features:
- Box shows some wear but unit is unused.
- 100% mint -100% perfecto.
- Don't miss out on this rockin' deal!
$179.99
4.9
Features:
- 9 outlets total outlets with dual retractable led lights.
- Furman's exclusive smp technology provides the highest level of surge & spike protection available.
- Isolated outlet banks minimize inter-component interference and noise contamination.
Features:
- Series multi-stage protection (smp) technology provides the highest level of surge & spike protection available.
- Linear filtration technology (lift) reduces ac noise linearly across a very wide bandwidth for unequaled audio & video clarity.
- 15 amp maximum current capacity with incorporated 15 amp thermal circuit breaker.
$399.00
5.0
Features:
- Description
- Confidence inspiring power
- High-end filtering
1. Furman M-8dx Power Conditioner
Product Details:
The furman merit series m-8dx power conditioner is the perfect low-cost ac power solution for any rackmount system. its 8 switched ac outlets in the rear panel power and protect all your equipment from power surges with up to a 15-amp load. the m-8dx protects your audio electronic equipment by combining high voltage varistor (mov) surge and transient suppressors. the fast-acting supression circuit quickly responds and clamps transient voltages to safe levels. an rfi/emi interference filter works to prevent noise from fluorescent lights, certain dimmers, radio transmitters, and similar sources of electronic pollution from contaminating the ac line and from there, leaking into sensitive audio, video, or computer circuits. nrtl/tuv listed. featuring 2 slide-out, swiveling light fixtures, the furman m-8dx conditioner provides discreet illumination of your equipment on stages, in studios, and in other dark places. a dimmer knob lets you adjust the lamp brightness to just the right level. it also features a digital led voltmeter to display incoming line voltages.
Specifications:
| Device Type | Line conditioner – rack-mountable |
| Input Voltage | AC 120 V |
| Frequency Required | 60 Hz |
| Input Connectors | 1 |
| Max Electric Current | 15 A |
| Surge Suppression | Yes |
| Surge Energy Rating | 170 Joules |
| EMI/RFI Noise Filtration | 26 dB |
| Clamping Level | 130 V |
| Circuit Protection | Circuit breaker |
| Cables Included | Power cable 6 ft |
| Features | On/off switch, digital voltmeter, LED indicators, noise filtering |
| Service & Support | Limited warranty – parts and labor – 3 years |
| Width | 19 in |
| Depth | 7.5 in |
| Height | 1.7 in |
| Weight | 5.73 lbs |
Reviews:
This product definitely met our expectations and works like a charm. However, our studio used to have a Power Conditioner that was also a sequencer and would power on our devices in the proper order. Although this product doesn't have his feature, it's still a great product.The Dope Spot Studios
I am a huge fan of these Furman power conditioners. I recently bought this one from American Music Supply for my new mobile podcasting studio in my tour bus. It is mounted in the top position of 4 space rack on my desk and provides clean, consistent power and surge protection for a preamp, compressor/ gate, interface, plus studio monitors and a computer. Plus, the retractable pull out lights are an awesome touch! Get this now and feel confident your gear is protected!
I bought this to protect my favorite bass amp. This is my second unit that I have purchased. Plenty of plugs including "wall wart" plugs in the rear. Having the additional plug on the front is super handy for lots of uses (charging your phone at band practice?) The readouts are easy to see and the controls are super simple. honestly too, pull out lights are a really slick feature. Functionally useful and look really cool. Dimmable and retractable if you don't need them at all. Anyways I think it's a critical piece of equipment if you love your gear. At the end of the day it's basically a really slick looking power strip.. Reliable, durable, cool looking and a decent price.joe roz
2. Furman Power Conditioner M-8lx
Product Details:
The furman merit m-8lx power conditioner is the perfect low-cost ac power solution for any rackmount audio system. the merit m-8lx has eight switched ac outlets in the rear panel to power and protect all your equipment with up to a 15-amp load. the furman merit m-8lx protects your delicate electronic equipment by combining high voltage varistor (mov) surge and transient suppressors. the fast-acting suppression circuit quickly responds and clamps transient voltages to safe levels. an rfi/emi interference filter works to prevent noise from fluorescent lights, certain dimmers, radio transmitters, and similar sources of electronic pollution from contaminating the ac line and from there, leaking into sensitive audio, video, or computer circuits. nrtl/tuv listed. the furman merit m-8lx power conditioner features 2 slide out, swiveling light fixtures to provide discreet illumination of your equipment on stages, in studios, and in other dark places. a dimmer knob lets you adjust the lamp brightness to just the right level.
Specifications:
| Device Type | Line conditioner – rack-mountable |
| Input Voltage | AC 120 V |
| Frequency Required | 60 Hz |
| Surge Suppression | Yes |
| Surge Energy Rating | 170 Joules |
| Clamping Level | 130 V |
| Cables Included | Power cable 6 ft |
| Service & Support | Limited warranty – parts and labor – 3 years |
| Width | 19.1 in |
| Depth | 7.5 in |
| Height | 1.7 in |
| Weight | 5.51 lbs |
Reviews:
I have this power conditioner rack mounted with an Orange OB1-500 and a Korg PitchBlack tuner. I've been using this setup pretty heavily both in rehearsal and gigging out. I've never had any issues and it provides a clean, solid power supply. It's very simple to operate. Plug it in and go. No bells and whistles, but in my opinion, that's what you look for in a power conditioner. Solid, reliable, and simple functionality. Furman is pretty much the gold standard in power conditioner and this one comes at a very reasonable price. As a cool bonus, the 2 retractable, swiveling lights are a nice feature to have especially in dimly lit venues. Overall, if you need a basic power conditioner that will handle any of your small to medium rack power needs, then the Merit M-8LX is the way to go.B-money
I cannot say enough good things about the Furman M8LX. I had all kinds of electrical bleed through that was driving me nuts. Running my amps, mixer, and pedal boards through the M8LX is a whole new world. No more disturbing interference, just clear, clean, crisp sound. The only minor drawback I would mention is the power cord is 6' long, would prefer 10'. Great product at a great price from AMS.Papa Joe
3. Furman – Pl-Pro C Power Conditioner With Voltmeter
Product Details:
The classic series from furman brings together superior protection and outstanding performance in a sturdy, rack-mountable design. instrument rigs furman's advanced multi-stage protection defends your gear from the spikes and surges that are so common at gigs and practice spots. with furman's advanced linear filtering technology, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp. pro audio when you're out there gigging, you never know what kind of power you're going to get. the wear and tear on mobile rigs eventually takes it's toll – that's why it's smart to plug into furman's advanced linear filtering technology. it keeps your equipment safe and sounding clean. whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.
Specifications:
| Device Type | Power line conditioner – rack-mountable |
| Height (Rack Units) | 1U |
| Rack Size | 19" |
| Input Voltage | AC 120 V |
| Input Voltage Range | AC 90 – 139 V |
| Input Connectors | 1 x power |
| Power Consumption Operational | 12 Watt |
| Power Output Connectors Details | 9 x power 1 x 4 pin USB Type A |
| Output Voltage | AC 120 V |
| Max Electric Current | 20 A |
| Surge Suppression | Yes |
| Surge Response Time | 1 ns |
| Clamping Level | 188 V |
| Max Spike Current | 6500 A |
| Circuit Protection | Circuit breaker |
| Cables Included | Power cable 10 ft |
| Features | Digital voltmeter, noise filtering, overvoltage protection, undervoltage protection, built-in USB charger, Linear Filtering Technology (LiFT), Extreme Voltage Shutdown (EVS) |
| Compliant Standards | cTUVus |
| Service & Support | Limited warranty – 5 years |
| Width | 19 in |
| Depth | 10.5 in |
| Height | 1.7 in |
| Weight | 11.99 lbs |
Reviews:
I take pride in my home music studio audio components and electronic musical instruments. The Furman power conditioner is synonymous with quality, reliability, and "second to none" A/C voltage filtering/voltage spike protection. I will always remain confident that my audio equipment signal processing is much cleaner and well-protected when plugged into the Furman unit. I personally consider this unit an important commodity for signal processing electronic devices. I am very happy with my purchase.fanfare21gt
I hoped this would help somewhat but I've been surprised by how much. My apartment outlets have fairly high and unstable voltage and some devices don't work well connected directly to the wall or through a normal surge protector. In particular anything with a wall wart was noisy before. They're all dead silent now. Also I used to get loud pops from my monitors if changing fan speed or adjusting other stuff in the apartment but that's gone with the monitors plugged into the Furman. Pretty impressive.
Recently, I just built a new PA system for one of my bands. After investing several thousand dollars in a digital console and new power amps, we decided that we should up the ante on our power conditioning. I've been using Furman gear since the early 80's (I've got one of their parametric EQs in a studio rack that's still rockin'). Their power conditioners have been in my equipment racks as long as they've been making them. But the ones we had been using for the PA were coming up on 8 years old. Being a Senior Electronics Tech by trade, I knew that certain components in a power conditioner wear out over time. After comparing specs, features, and price we opted to go with the PL-Plus-C. The two specs I really look at for a power conditioner are the noise attenuation and the response time. A lot of manufacturers don't fully spec these, and in my experience an omitted spec is usually one they're not very proud of. The attenuation and response time of the PL-Plus-C is on par with some of Furman's more expensive solutions, just minus the whistles and bells. I gave up having a digital live voltage readout, but for me the bar graph style meter is a lot easier to read across a stage. Bonus points to Furman for adding the LED on the front to indicate that the protection circuitry is working. This is a section of power conditioners that takes the brunt of line surges (so your equipment doesn't have to). It does eventually wear out, and to have that "wear indicator" on the front is huge! And the lamp socket on the rear panel is a handy addition when working on your connections…because we all know how well most clubs are lit, right? Finally, the unit is seriously built. It's funny because one of the only negative reviews I've ever read on this conditioner was someone complaining about the weight. Well, that rookie apparently doesn't realize that good noise attenuation on AC power lines takes some sizeable inductors, and those are use going to have some heft to them. I personally find the weight (12 pounds) to be reassuring. So, how well does it work? Time will tell. Again, this is 1 rack unit of insurance. I can tell you this…in all of my time using Furman power products I have never lost a piece of gear to an electrical event. And when I can read interviews and see pictures of the gear that a lot of pro touring musicians and sound companies use and see the same piece of gear I've got in my rack…well, there's got to be something to that.
4. Furman M-8s Power Conditioner / Sequencer
Product Details:
Product description merit m-8s power sequencer is the perfect low-cost ac power solution for any rack mount system. install an m-8s in your rack, and the eight outlets in the rear panel will power up in sequence and protect all your equipment up to a 15-amp load. features six sequenced rear panel outlets (in 3 groups), two unswitched rear panel outlets, and one front panel unswitched outlet. momentary and maintained sequencing via rear panel terminal block or front panel switch (momentary only). standard level ac protection and filtering. 15 amp rating all settings and configurations available on rear panel. from the #1 brand in professional power conditioning. perfect for instrument rigs, home recording, dj equipment, pro audio rigs and home/commercial audio systems.
Specifications:
| Device Type | Power sequencer – rack-mountable |
| Height (Rack Units) | 1U |
| Input Voltage | AC 120 V |
| Input Connectors | 1 x power NEMA 5-15P |
| Power Output Connectors Details | 9 x power NEMA 5-15 |
| Max Electric Current | 15 A |
| Surge Suppression | Yes |
| Surge Energy Rating | 225 Joules |
| Clamping Level | 130 V |
| Max Spike Voltage | 500 V |
| Max Spike Current | 12000 A |
| Circuit Protection | Circuit breaker |
| Cables Included | Power cable 10 ft |
| Features | Noise filtering |
| Service & Support | Limited warranty – 3 years |
| Min Operating Temperature | 41 °F |
| Max Operating Temperature | 104 °F |
| Width | 19 in |
| Depth | 8.7 in |
| Height | 1.7 in |
| Weight | 7.05 lbs |
| Shipping Width | 22 in |
| Shipping Depth | 9.3 in |
| Shipping Height | 3.5 in |
| Shipping Weight | 7.94 lbs |
Reviews:
5. Furman Elite-15 Pf I Ac Power Conditioner
Product Details:
The elite-15 pf i also features remote control capability via 12v triggering, compatible with the 12v triggering devices commonly found in power receivers and pre-amp processors. additional products (such as a remote subwoofer) can be daisy-chained from the 12v output jack for an additional triggered unit. the 12v triggering feature may be bypassed if desired. at the center of the elite-15 pf i is our unique power factor technology. for the first time, low-level analog, digital, and video components are not modulated or distorted via the power amplifier's extreme ac current demands. further, the power amplifier sees a highly filtered, extremely low-impedance supply of ac power. the elite-15 pf i, in fact, has in excess of 3 amps of continuous current reserve (over 45 amps peak charge) for the most extreme peak power demands. this technology enables power amplifiers and powered subwoofers to operate at peak efficiency, reaching levels of performance previously unattainable. no longer will your amplifier's performance be at the mercy of your home's incoming ac power or inferior ac protection/filtering devices. the net effect is as if your power amplifier virtually doubled in power and improved immeasurably in quality.
Specifications:
Reviews:
It came in a sealed box. Some of the wording on the back is slightly different than the ones displayed on authorized Furman merchants. Furman specifically says that they will not cover the warranty on these products that have been purchased via ebay. So, I'm a little concerned about my purchase now. Especially since it was a few hundred less than what the authorized merchants are selling it for. Is it really new? Is it refurbished? Or is it an older version? I really don't know.traviwilber-0
I recently upgraded to the Furman Elite 15PF i Power Conditioner for my stereo audio system, which includes a tube integrated amp, digital music server, turntable, phono preamp and powered subwoofer. I wasn't sure what to expect but am greatly pleased with the improvement in sound. Highs are sparkling, imaging is more precise, as is depth of soundstage. Bass is slightly tighter and controlled. There is also an increase in detail, revealing background vocals and sounds not previously heard on many recordings. Highly recommended for high quality audio systems.JAMES R.
Just bought the Parasound Halo A 21+ and the Monster power conditioner and surge protector I had was old and I wanted to upgrade. THE furman elite-15 did not add to /or change the sound of anything that was connected with the exception of the 2 plate amps in each powered tower when connected to the Furman Elite Pfi the small hum even when not in use was gone!…that alone was worth the purchase. Again Brian was great because the first one I recd was damaged and he sent out a replacement and no issues at all….thanks again for another great component in my 2 channel listening system!JASON
6. Furman Pl-Plus Dmc 19 Inch Rackmount 15 Amp Power Conditioner
Product Details:
The classic series from furman brings together superior protection and outstanding performance in a sturdy, rack-mountable design. the classic series features furman's revolutionary series multi-stage protection (smp), linear filtering technology (lift), and extreme voltage shutdown (evs). together, these technologies comprise what is, without question, one of the worlds most advanced and comprehensive transient voltage surge suppressors.
Specifications:
Reviews:
Overall: This unit costs a pretty penny- BUT you get quality and peace of mind! This is a rather large and heavy (11lbs) piece, and quite deep. Did I have problems before- NO- my sound system was rock solid and sounded great! BUT, there is a slight perceptible improvement with this unit. I have 2 other Furman units, and am using a M-8Dx as my second unit, itself a fine unit. BUT, am going to replace with another PL Plus DMC very soon! The LED unit is larger, and being able to see what I'm pulling is a nice feature. If your on the fence as to whether the cost is worth it- rest assured it is!Reginald
I use this product for my guitar amps. The PL-PLUS-DMC clearly enhanced the quality of my guitar amplifier tone. I noticed that one unit made my amp sound much better, but when I ran 2 amps through one unit, the sound was noticeably worse; so, I bought another unit, and I run each amp through it's own conditioner. The tone improvement is definitely worth the cost, so I didn't hesitate to purchase the second unit for my second amp. It is what it is; I'm a detail person, I have high-end gear, because I demand performance, so you won't see any corner cutting with me – all the details matter, they make the bigger picture happen.. I plan on purchasing one more unit to run the effect processors that I'll be introducing. I also plan on purchasing a unit for the home theater system that I'm building for my wife. Bottom line – If you buy a PL-PLUS-DMC you will notice the difference.natedogg
This is a great great power conditioner! And the awesome service that ProAudioStar shipped the power conditioner quick alongside everything being packaged very secured with no issues at all. I would definitely gonna recommend it to a friend or friends for sure, another thing being how their prices are affordable and I will buy from them again if I ever need anything.SplendidFerret-52500
7. Furman It-Ref 16 E I Power Conditioner
Product Details:
Clean and condition your ac power while meeting the extreme ac power demands of amplifiers with power factor technology. the extreme ac demands encountered in the professional audio/video arena have required technological developments far in excess of typical home theater/audiophile power products. in studios, live sound, and broadcast facilities, breakdown is unacceptable. equipment failure or poor performance is costly. ac lines are plagued with ever increasing noise. when ac noise couples into your system's critical components, it masks low level signals and cripples performance. this low-level content is critical because it relays the crucial harmonics and ambience in audio, and depth and clarity in video. with this line conditioner exclusive discrete symmetrical power, video screens, projectors, cd-dvd players, pre-amplifiers, and scalers are fed linearly filtered low-noise symmetrical power. this dramatically reduces ac noise, ensuring peak operation of your critical components. you will see and hear your theater or audio system as it should be – uncompromised.
Specifications:
| Device Type | Line conditioner – rack-mountable |
| Height (Rack Units) | 2U |
| Rack Size | 19" |
| Input Voltage | AC 240 V |
| Frequency Required | 50/60 Hz |
| Input Connectors | 1 |
| Power Consumption Operational | 8.5 Watt |
| Power Output Connectors Details | 1 x power 16 A 3 x power 10 A 8 x power 4 A |
| Max Electric Current | 16 A |
| Dataline Surge Protection | Cable TV/satellite – 4 lines |
| Surge Suppression | Yes |
| Circuit Protection | Circuit breaker |
| Rack Mounting Kit | Included |
| Features | Noise filtering, overvoltage protection, Multi-Stage technology, Linear Filtering Technology (LiFT), Extreme Voltage Shutdown (EVS), 4 discrete power banks |
| Compliant Standards | C-ETL |
| Service & Support | Limited warranty – 5 years |
| Width | 17 in |
| Depth | 16.3 in |
| Height | 6 in |
| Weight | 88.18 lbs |
8. Furman – P-8 Pro C – Power Conditioner
Product Details:
The 20 amp p-8 pro c delivers furman's acclaimed series multi-stage protection (smp) circuit and linear filtering technology (lift), which provides filtration against excessive ac line noise, ensuring optimal performance without any leakage to ground. featuring a rugged 1-ru chassis with a minimalistic front panel, the p-8 pro c is ideal for power conditioning applications where front panel metering and illumination are not required. surge protection furman's exclusive smp technology provides the highest level of surge & spike protection available. noise filtration lift offers ac power filtering to ensure clean power for unequaled audio & video clarity. voltage protection advanced evs circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions. diagnostic lights led status indicators warn you when voltage is outside of nominal range or when protection has been compromised. isolated banks isolated outlet banks minimize inter-component interference and noise contamination. wall wart spacing three widely spaced outlets accommodate bulky ac power transformers. 20 amp rating 20 amp rating featuring a high inrush magnetic circuit breaker for added protection. nine total outlets nine total outlets (8 rear panel outlets and one front panel convenience outlet). bnc lamp connector rear panel bnc connector powers any standard gooseneck lamp for rear rack illumination.
Specifications:
| Device Type | Line conditioner – rack-mountable |
| Input Voltage | AC 90-140 V |
| Frequency Required | 50/60 Hz |
| Power Consumption Operational | 12 Watt |
| Max Electric Current | 20 A |
| Surge Suppression | Yes |
| Max Spike Current | 6500 A |
| Features | LED lamp, noise filtering |
| Width | 19 in |
| Depth | 10.5 in |
| Height | 1.8 in |
Reviews:
For clean power and professional rack wiring this is a must.E.M.B.
One of ther very best Power Conditioners !!!! Love it !!!mikeymoonpie
Top of the line at a value. Installs in moments in my rack, very solid switch and firm outlets for the plugs.H.E.D.C.
9. Black Lion Audio Pg-Xlm Power Conditioner (1u Rackmount)
Product Details:
Confidence inspiring power.there’s nothing worse than scoring that “must-have” piece of gear, only to find that it’s noisier than should be expected, missing high frequency detail, or even worse — having it fried by power surges! black lion audio has been trusted for years for modifying the best gear and making it even better, and that’s what it took to create the pg-xlm: taking industry-standard designs, and improving them to the point of peak performance.after creating the original pg-1, black lion audio knew that plenty of professionals on a smaller budget felt left out, as some features might not be as important as an economy price-point. the pg-xlm was built with this in mind, while still providing best-of-class power conditioning! high-end filtering. in testing, this has provided an average of 90% of noise filtering, as opposed to the typic
Reviews:
Beautiful build, delivered fast! Lights are nice with a simple "high/off/low" adjustability. Only knock is that I've had some inconsistency with the connectivity of the usb charger on the front…but I don't use it frequently to charge anything so no biggie to me personally. Maybe I'll contact BLA about getting a replacement soon though, hopefully they'll show some love. Love this thing though, looks great in the rackChris G.
Reliable, clean power at a reasonable price. Glad to see someone is giving Furman some competition.Todd
Overall: My rig consist of a Line 6 HD Pro , Art SL1 Amp and a few Pedals , it is reasonable quiet, The PG XLM makes it dead quite and eliminated several power cords , plenty of plugs even for wall warts, Love the adjustable lights, USB charger a bonus, My only complaint is the input power LED indicator is always on even when the unit is offDennis
10. Furman – Pl-8c – Power Conditioner
Product Details:
Surge protection furman's exclusive smp technology provides the highest level of surge spike protection available. noise filtration lift offers ac power filtering to ensure clean power for unequaled audio video clarity. voltage protection advanced evs circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions. pull-out lights dual smooth track retractable led lights illuminate equipment in your rack. diagnostic lights led status indicators warn you when voltage is outside of nominal range or when protection has been compromised. isolated banks isolated outlet banks minimize inter-component interference and noise contamination. wall wart spacing three widely spaced outlets accommodate bulky ac power transformers. 15 amp rating 15 amp rating featuring a high inrush magnetic circuit breaker for added protection. nine total outlets nine total outlets (8 rear panel outlets and one front panel convenience outlet). bnc lamp connector rear panel bnc connector powers any standard gooseneck lamp for rear rack illumination.
Specifications:
| Weight | 12 lb |
Reviews:
When I think of all the cheaper power bars I've purchased over the years, it makes me wish I knew about this product long ago. The cheaper ones, including Monster and other "quality brands", do not provide this level of protection and filtering. Also, the cheaper ones all eventually die, meaning they stop protecting my stuff. One bad storm can kill their surge protection and then you'll have to replace it. The Furman protection will basically last "forever" because of the way it's designed to protect itself with multi-stage protection that the others don't have. If you spend decent money on your computer, TV, stereo, etc. then I urge you to spend a couple hundred dollars and protect that gear. It will last AND your audio and video quality will improve too due to the filtering/conditioning. I can't explain it, but you can notice an improvement between plugging into the wall socket or plugging into this Furman. Highly recommended for valuable home electronics and also for gigging musicians to use for their amplifiers, p.a.'s, etc. I now own a number of these.F.t.M.P.
The Furman PL-8C is a welcome addition to my rack unit. Besides having surge protection for the equipment. The 8 extra outlets really cleans up all those wires running everywhere. Plus an extra outlet in front for convenience. The real reason I went with this model was mainly for the extra lighting. 2 pull out lights in front, have a dimmer switch which acts as the on/off control by pushing the dimmer button and turning for brightness. Not super bright but sufficient because it is always so dark in that area. Plus a bonus. There is a BNC connection in the back of the unit for another add on light (not included) to brighten the back of the rack where you need it the most. I will purchase this item again in the future.
I replaced an older model Furman with this unit. Fit in the rack is perfect. The amount of outlets is just what I needed. There is no 60 cycle hum or other power related noised on any circuit plugged into it. These power conditioners are awesome for a rack full of signal processors, amps, or just about anything you want to plug into it. The LED lights on the front make it the essential top mount for any rack with adjustable equipment. I highly recommend this power conditioner!J.
11. Musician's Gear Power Conditioner Mg900sc
Product Details:
Specifications:
| Dimensions | 2.2×12.2×21.8 inches |
Reviews:
This is a great price for a very basic "rack-mount-power conditioner". Inside there is a basic passive RFI/EMF noise filter Network and basic passive surge suppressor. So, yes there are very few electronic components inside the box. It is basically a "decent" power strip that rack mounts so you don't lose it, and don't roll equipment over it. Sure, you can spend more, lots more, and the level of electronic sophistication goes up. But unless you are running medical equipment, or very expensive or highly sensitive equipment, you really don't need any more. Bottom line, this unit will help protect your "normal" Audio / Video or electronic gear and organize AC cables in one convenient rack slot or shelf space.Angus Black
I originally bought the Musicians Gear Power Conditioner for use with a generator. Being portable generators don't exactly produce clean electricity for electronic equipment. And those generators that do produce clean electricity are a little on the pricey side. I ended up using it in our studio, our utility company Kansas City Power and Light has some of the dirtiest electricity in the area. After connecting everything up we noticed a big deference. The popping and hum from florescent lights etc. had disappeared. Even equipment was working better. We are going to buy two more of the power conditioners one for the generator and another for other electronic equipment. One other note this is a rack mount unit. I recommend these power conditioners for all your electronics; it's a chip investment unless you just like replacing damaged electronics.Dick
I ave purchased several of the units from MF during the last year. All were purchased on sale. The frst unit was purchased for my recording gear, but I like it so much that I bought additional units for my home audio system. They're also great for computer systems or anything else that would benefit from filtered A/C power or surge protection. The ONLY "complaint" I have is that this unit does not have a USB charger on board. Many devices in the recording chain now rely on USB power. It would be nice to have that. However, this is an excellent power conditioner for the price. I'm sure I will buy more then next time they're on sale.Mike B
12. Power Conditioner – Furman Elite-20 Pf I
Product Details:
The essence of the elite-20 pf i is furman's unique power factor technology. for the first time, low-level analog, digital, and video components are not modulated or distorted by the power amplifier's extreme ac current demands. further, the power amplifier is fed a highly filtered, extremely low-impedance supply of ac power. the elite-20 pf i, in fact, has in excess of 4 amps of continuous current reserve (over 55 amps peak charge) for the most extreme peak power demands. this technology enables power amplifiers and powered subwoofers to operate at maximum efficiency, reaching levels of performance previously unattainable. no longer will your amplifier's performance be at the mercy of your home's incoming ac power or inferior ac protection/filtering devices. the net effect is as if your power amplifier virtually doubled in power and improved immeasurably in quality. when employing the elite-20 pf i, you will immediately notice far clearer, stunningly focused sound and visual images from your system. video presentation will be crisp and colors true with greater gray and black scale definition, as well as noticeably improved depth and clarity. sonic transients will be startlingly fast with bass fundamentals that shake foundations with their weight and visceral impact. mid and high frequencies will bloom with sweet, non-glaring ease as imaging improves dramatically, all the while remaining true to your system's inherent virtues.
Specifications:
| Device Type | Line conditioner – external |
| Height (Rack Units) | 2U |
| Input Voltage | AC 120 V |
| Frequency Required | 60 Hz |
| Input Connectors | 1 |
| Max Electric Current | 55 A |
| Dataline Surge Protection | Cable TV/satellite – 3 lines Phone line – 2 lines |
| Surge Suppression | Yes |
| Clamping Level | 188 V |
| Circuit Protection | Circuit breaker |
| Service & Support | Limited warranty – parts and labor – 3 years |
| Width | 17 in |
| Depth | 14.8 in |
| Height | 4 in |
| Weight | 18.08 lbs |
Reviews:
We frequently experience lightning in our area. The Furman power conditioner gives me some peace of mind that my gear is protected. My wife finds it convenient that she can flip one switch and turn everything on. The built in LED lights are a nice touch for lighting up the controls on adjacent components. This unit will work with a 15 amp circuit but there is a warning that power can be interupted. I had a dedicated 20 amp circuit installed and it hasn't blinked.JEAN
The truly linear filtering in this unit is on par with their Reference series, this is the only Elite achieving that. Use of this 20A unit on a 15A circuit ensures safety to the max. We were hit by lightning and learned the ugly truth about Panamax, Monster, and Tripp Lite. Only the Belkin wall surge suppressor and the Cyberpower units saved computers and appliances. Now Furman is my new best, sound is clear and instrument separation is amazing in our living room Marantz receiver system.bobpaule
I recently ventured back to HiFi. Back in the day I had loads of quality equipment including Quad Electrostatic model Ts and host of great analogue equipment which has all gone by the wayside as I moved throughout my lifetime with less space than before. So I decide to get HiFi in a box with the latest KEF LS 50 Wireless 2 speakers along with a pair of KC 62 Subs. After placing the LS 50 W 2's on stands I noticed the super sharp accurate sound that I had heard in the audition room, but something else was missing from the equation. That something else was the cleaning up of the electricity before it reached my equipment. When I first heard of this I thought it to be hocus-pocus, but I read the reviews, called Furman customer service and decided to there was solid reasoning towards what improvements I would hear. So I made the purchase and I hooked up the Furman 20 PFI and let me tell you, brother, the step up in clarity, staging, speed of sound and warmth was immediately very apparent. It is definitely worth the investment for this particular unit, and it should only get better as the equipment achieves full breakup, which according to Furman is about 2 weeks down the road after plugging in. Needless to say I'm looking forward to a fortnight from now. If you are on the fence I strongly recommend that you take the leap. You will not regret it.Joel
13. Black Lion Audio Pg-Xlm Power Conditioner
Product Details:
Black lion audio is a company famous for taking the best gear in the world and modding it into something even better. and with that philosophy in mind comes the pg-xlm; a product that trains its eye on a studio mainstay without which there could be no studio: the power conditioner. the pg-xlm offers nine outlets for your studio gear, as well as usual appointments for any rackmount power conditioner. this ensures your gear will operate as optimally as it can, given the power that flows from your walls. the pg-xlm is a power conditioner, but it is not a run-of-the-mill power conditioner. it delivers pg-90 filtering, which has been developed by black lion to ensure no high-frequencies are lost, no unwanted noises creep in, and most importantly, no unexpected power surges fry your gear. its dual pullout lamps can assist you in low-light situations. a real-time voltage meter keeps track of how much voltage you're using at any one time. in addition to eight filtered and surge-protected outlets on the rear, the pg-xlm sports a single switched outlet on the front, as well as a usb port for charging your various devices.
Specifications:
Reviews:
Beautiful build, delivered fast! Lights are nice with a simple "high/off/low" adjustability. Only knock is that I've had some inconsistency with the connectivity of the usb charger on the front…but I don't use it frequently to charge anything so no biggie to me personally. Maybe I'll contact BLA about getting a replacement soon though, hopefully they'll show some love. Love this thing though, looks great in the rackChris G.
Reliable, clean power at a reasonable price. Glad to see someone is giving Furman some competition.Todd
Overall: My rig consist of a Line 6 HD Pro , Art SL1 Amp and a few Pedals , it is reasonable quiet, The PG XLM makes it dead quite and eliminated several power cords , plenty of plugs even for wall warts, Love the adjustable lights, USB charger a bonus, My only complaint is the input power LED indicator is always on even when the unit is offDennis
14. Furman Elite-15 Dm I Ac Power Conditioner
Product Details:
For over 40 years, furman has pioneered the development of ac power products for the most demanding audio, video, and broadcast professionals. though the need for pristine ac power is nothing new, the elite-15 dm i's technology and its unique implementation are revolutionary and without peer. the extreme ac demands encountered in the professional audio/video arena have required technological developments far in excess of typical home theater/audiophile power products. in studios, live sound, and broadcast facilities, breakdown is unacceptable. equipment failure or poor performance is costly. the same is true of today's home theater. our solution based technology, extensive engineering expertise, and robust build quality have answered the challenge of today's corrupted power lines, and led to the creation of the elite-15 dm i.
Specifications:
| Device Type | Line conditioner – external |
| Height (Rack Units) | 2U |
| Input Voltage | AC 120 V |
| Frequency Required | 60 Hz |
| Power Consumption Operational | 12 Watt |
| Output Voltage | AC 120 V |
| Max Electric Current | 15 A |
| Dataline Surge Protection | Phone line – RJ-11 Satellite – F connector – 3 lines |
| Surge Suppression | Yes |
| Clamping Level | 140 V |
| Features | Noise filtering, overvoltage protection, built-in bypass switch |
| Compliant Standards | CSA NRTL/C |
| Service & Support | Limited warranty – parts and labor – 3 years |
| Width | 17 in |
| Depth | 14.8 in |
| Height | 4 in |
| Weight | 14.11 lbs |
Reviews:
I'm an amateur audiophile, and have a nice Rega turntable setup. I was using a standard surge protector to protect all my expensive audio equipment. I started reading up on power conditioners, and the clean power/protection they offer. I was pleasantly surprised after plugging everything in, and firing up the turntable, that the low end is more clean/detailed. I am very pleased with the purchase. Worth every penny, in my opinion.usmc8793
If you have a home audio system you care about, that youve invested money and attention in, do yourself a favor and improve and protect it with a Furman Elite 15DM i or similar Furman unit. If you think all power comes out of your wall outlet uniformly, wake up and feel the voltage fluctuations that your system has to cope with if you dont have a power conditioner. This unit takes that power input and gives your devices a smooth and steady power supply that they will drink gratefully, and you in turn will enjoy their uncompromised performance and sound. Plus they will be protected from surges and spikes that could cause serious harm and leave you scratching your head, wondering why your cool gear has failed. This Furman unit enables having all outlets switched or some remaining unstitched, a nice feature. It also has a dimmable display (in audiophile blue light) so the meters wont distract from your home theater setting if youre using it nearby. This unit is a quality piece of gear and a robust step forward in power conditioning and component protection.becivil
15. Panamax Max M5400-Pm Home Theater Power Conditioner
Product Details:
Improve system performance and prolong equipment life by providing a consistent level of optimal power to your equipment. level 4+ power cleaning and filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your a/v equipment to perform up to its full capability. panamax's patent pending avm circuitry continuously monitors the incoming power as displayed on the digital voltmeter. in case of an under voltage or an over voltage, a flashing red lightning bolt will be displayed in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. when voltage returns to a safe level, power to the equipment is automatically reconnected. the m5400-pm is designed to provide noise isolation between 5 isolated outlet banks so that any noise created by an a/v component cannot contaminate the power going to equipment plugged into another outlet bank.
Specifications:
| Device Type | Surge protector – external |
| Input Voltage | AC 120 V |
| Input Voltage Range | AC 90 – 142 V |
| Frequency Provided | 60 Hz |
| Frequency Required | 60 Hz |
| Input Connectors | 1 x power |
| Power Output Connectors Details | 11 x power |
| Output Voltage | AC 120 V 60 Hz |
| Max Electric Current | 15 A |
| Dataline Surge Protection | Network – RJ-45 – 2 lines Phone line – RJ-11 Cable TV/satellite/antenna – F connector – 3 lines |
| Surge Suppression | Yes |
| Surge Response Time | 1 ms |
| Surge Energy Rating | 2125 Joules |
| EMI/RFI Noise Filtration | 80 dB |
| Clamping Level | 200 V |
| Circuit Protection | Circuit breaker |
| Cables Included | Power cable 10 ft |
| Equipment Protection Value | 5000000 US Dollars |
| Features | Voltage monitoring, digital voltmeter, noise filtering, overvoltage protection, undervoltage protection, built-in USB charger |
| Service & Support | Limited warranty – 3 years |
| Width | 17 in |
| Depth | 12.8 in |
| Height | 4.1 in |
| Weight | 29.98 lbs |
| Shipping Width | 23.7 in |
| Shipping Depth | 18.5 in |
| Shipping Height | 10 in |
| Shipping Weight | 33.51 lbs |
Reviews:
Very nice piece of equipment. Virtually new and in pristine condition.handyandy99
Buyer BEWARE!! There is a review on here whereby the person reports receiving (2) defective units and is reporting the 5400-PM as "junk". This unit is far from junk and having sold HUNDREDS of Panamax units, we can vouch for the integrity of Panamax products. I'm not sure where he purchased the original one, but unless the buyer purchased from an AUTHORIZED Panamax Dealer, he IS out of luck. ONLY PURCHASE FROM AUTHORIZED DEALERS. It's the only way you will get the manufacturer's support. ADS Has Solutions LLCAlan
16. Furman – Pl-Pro Dmc E Power Conditioner
Product Details:
Surge protection furman's exclusive smp technology provides the highest level of surge @ spike protection available. noise filtration lift offers ac power filtering to ensure clean power for unequaled audio @ video clarity. voltage protection advanced evs circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions. pull-out lights dual smooth track retractable led lights illuminate equipment in your rack. diagnostic lights led status indicators warn you when voltage is outside of nominal range or when protection has been compromised. usb charger front panel convenience charger allows you to charge most media devices or power a usb lamp. voltmeter / ammeter large digital voltmeter / ammeter, with discrete dimmer button, displays line votlage and true rms current draw. isolated banks isolated outlet banks minimize inter-component interference and noise contamination. 16 amp rating 16 amp rating featuring a high inrush magnetic circuit breaker for added protection. 11 total outlets 11 total outlets (10 rear panel outlets and one front panel convenience outlet). bnc lamp connector rear panel bnc connector powers any standard gooseneck lamp for rear rack illumination.
Specifications:
Reviews:
Love my pl-pro dmc ! Led lights, USB charger, 2 isolated banks , voltage and amp draw meters. Caution it is a 20 amp conditioner and it does have a 120v/20 amp plug ! A 15-20 amp adapter plug is readily available at your local hardware store or RV dealer for not much money! Very quality built unit and cleans up your power really well!
I came from a cheaper device. This one is just excellent! Top quality of workmanship, works as expected. I just cant imagine my daily work without it. Recently I experienced occasional power spikes that resulted in different kind of issues using my analog loop. Now this is over. I wish it could have a current regulator built in, but I can live without it- the filtering is great!
I am just now nearing completion of my investment into the components needed to present a high-end Karaoke show. I am quite familiar with Furman Power Conditioners. This is why I have chosen Furman over all others. I just have not yet assembled my rack system yet. My Furman Power Conditioner will be the single most important component in the rack. As with any live performance shows, there is a radical shift in power usage, constantly. Without a good power conditioner one is always at high risk of an embarrassing end of the show, not to mention the over 30K I have invested into the rack system alone. My Furman Power Conditioner will be places at the top of my rack to utilize its pop-out LCD lights. I am very excited to present my debut show, soon.
17. Furman Pl-Pro Dmc Power Conditioner
Product Details:
The foundation of any good rack system is steady uninterrupted flow of current. this is what the pl-pro provides in this efficient, well designed unit. the pl-pro delivers reliable current to your system for up to nine processing units. sustained current keeps analog processing in top condition, saving valuable equipment from 'brown out' which can be harmful to tubes and process function. front face retractable tube lights as well as a 'goose neck' lighting aperture in the rear provide illumination for low light environments.
Specifications:
| Weight | 15 lb |
Reviews:
Love my pl-pro dmc ! Led lights, USB charger, 2 isolated banks , voltage and amp draw meters. Caution it is a 20 amp conditioner and it does have a 120v/20 amp plug ! A 15-20 amp adapter plug is readily available at your local hardware store or RV dealer for not much money! Very quality built unit and cleans up your power really well!
I came from a cheaper device. This one is just excellent! Top quality of workmanship, works as expected. I just cant imagine my daily work without it. Recently I experienced occasional power spikes that resulted in different kind of issues using my analog loop. Now this is over. I wish it could have a current regulator built in, but I can live without it- the filtering is great!
I am just now nearing completion of my investment into the components needed to present a high-end Karaoke show. I am quite familiar with Furman Power Conditioners. This is why I have chosen Furman over all others. I just have not yet assembled my rack system yet. My Furman Power Conditioner will be the single most important component in the rack. As with any live performance shows, there is a radical shift in power usage, constantly. Without a good power conditioner one is always at high risk of an embarrassing end of the show, not to mention the over 30K I have invested into the rack system alone. My Furman Power Conditioner will be places at the top of my rack to utilize its pop-out LCD lights. I am very excited to present my debut show, soon.
18. Recertified – Furman Pl-8c 15 Amp Advanced Level Power Conditioning, Smp, Evs, Lift, 9 Outlets
Product Details:
Brand: furmancolor: blackfeatures: 9 outlets total outlets with dual retractable led lights furman's exclusive smp technology provides the highest level of surge & spike protection available. isolated outlet banks minimize inter-component interference and noise contamination. 15 amp rating featuring a high inrush magnetic circuit breaker for added protection. from the #1 brand in professional power conditioning. perfect for instrument rigs, home recording, dj equipment, pro audio rigs and home entertainment systems. details: 9 outlets total outlets with dual retractable led lightsean: 0713803235172release date: 01-08-2009package dimensions: 21.6 x 14.6 x 4.0 inchesbinding: electronicspart number: pl8cmodel number: pl8c
Specifications:
| Receptacles | 9 |
| Plug/connector Type | NEMA 5-15P |
| Protection Type | AC Surge |
| Input Voltage | 110 V AC |
| Weight approximate | 12 lb |
Reviews:
When I think of all the cheaper power bars I've purchased over the years, it makes me wish I knew about this product long ago. The cheaper ones, including Monster and other "quality brands", do not provide this level of protection and filtering. Also, the cheaper ones all eventually die, meaning they stop protecting my stuff. One bad storm can kill their surge protection and then you'll have to replace it. The Furman protection will basically last "forever" because of the way it's designed to protect itself with multi-stage protection that the others don't have. If you spend decent money on your computer, TV, stereo, etc. then I urge you to spend a couple hundred dollars and protect that gear. It will last AND your audio and video quality will improve too due to the filtering/conditioning. I can't explain it, but you can notice an improvement between plugging into the wall socket or plugging into this Furman. Highly recommended for valuable home electronics and also for gigging musicians to use for their amplifiers, p.a.'s, etc. I now own a number of these.F.t.M.P.
The Furman PL-8C is a welcome addition to my rack unit. Besides having surge protection for the equipment. The 8 extra outlets really cleans up all those wires running everywhere. Plus an extra outlet in front for convenience. The real reason I went with this model was mainly for the extra lighting. 2 pull out lights in front, have a dimmer switch which acts as the on/off control by pushing the dimmer button and turning for brightness. Not super bright but sufficient because it is always so dark in that area. Plus a bonus. There is a BNC connection in the back of the unit for another add on light (not included) to brighten the back of the rack where you need it the most. I will purchase this item again in the future.
I replaced an older model Furman with this unit. Fit in the rack is perfect. The amount of outlets is just what I needed. There is no 60 cycle hum or other power related noised on any circuit plugged into it. These power conditioners are awesome for a rack full of signal processors, amps, or just about anything you want to plug into it. The LED lights on the front make it the essential top mount for any rack with adjustable equipment. I highly recommend this power conditioner!J.
19. Furman Cn-1800s 15a Smart Sequencing Power Conditioner
Product Details:
Series multi-stage protection (smp) technology provides the highest level of surge & spike protection available. linear filtration technology (lift) reduces ac noise linearly across a very wide bandwidth for unequaled audio & video clarity. 15 amp maximum current capacity with incorporated 15 amp thermal circuit breaker. smartsequencing allows bidirectional, safe sequenced power up/down operations via the push of a button or turn of a key. the cn-1800s contains eight rear panel nema 5-15r outlets and one front panel nema 5-15r outlet.
Specifications:
| Product Dimensions | 10.5 x 17 x 1.75 inches |
| Is Discontinued By Manufacturer | No |
| Color Name | Black |
Reviews:
20. Black Lion Audio Pg-1 Type F Power Conditioner
Product Details:
The pg-1 type f is built using premium panasonic and wima capacitors, due to their superior execution in eliminating high-frequency noise that robs equipment of its peak performance. in testing, this has provided an average of 99.7% of noise filtering, as opposed to the typical average of 85% found in other power conditioners at the same price point. combine that superior power filtration with an impressive power absorption rating of 2775 joules, and your gear isn't just getting quality power, but it's protected from the most unsafe of scenarios that can happen.
Specifications:
| Form Factor | Rackmount |
| Rated Current | 120 A |
| Number of Circuits | Not Specified by Manufacturer |
| Battery Backup | No |
| Typical Backup Runtime | Not Specified by Manufacturer |
| Integrated Lamps | Yes |
| Outlets | 8 |
| AC Input Power | Not Specified by Manufacturer |
| DC Output Power | Not Specified by Manufacturer |
| Load Capacity | Not Specified by Manufacturer |
| Circuit Breaker | No |
| Rackmount Size | 1 RU |
| Dimensions | 19 x 9.8 x 1.7" / 48.3 x 24.9 x 4.3 cm |
Reviews:
Excellent produit, fait exactement ce pour quoi il est prévu. Un souhait l'inter on/off ne coupe pas actuellement l'alimentation du conditionneur. Un regret, la documentation n'indique pas le courant disponible sur la prise XLR dédiée à une lampe 12V Led. A part ces détails produit très recommandable
Related posts:
- Guitar Amp Power Attenuators For Sale (2024 Update)
- Powered Guitar Pedal Board For Sale (2024 Update)
- Guitar Amp Power Conditioner For Sale (2024 Update)
- Guitar Amp Power Transformers For Sale (2023 Update)
- Portable Guitar Amp With Headphones For Sale (2024 Update)
- Positive Grid Spark Guitar Amp For Sale (2024 Update)
- Power Amp For Guitar Cab For Sale (2024 Update)
- Small Guitar Pedal Board For Sale (2024 Update)
- Stereo Guitar Amp Head For Sale (2024 Update)
- Tube Guitar Amp Kits For Sale (2024 Update)
