Are you looking for the Best Pots For Guitar? If so, you’ve come to the right place.
Choosing the Best Pots For Guitar can be difficult as there are so many considerations, such as EMG, Seymour Duncan, Fender, Emerson Custom, ALPHA, CTS. We have done a lot of research to find the top 20 Best Pots For Guitar available.
The average cost is $18.83. Sold comparable range in price from a low of $3.50 to a high of $118.39.
Based on the research we did, we think CTS TAOT Custom 500K Short Split Shaft Audio Taper Pots – Set of Four (4x) – 10% Tolerance – 450g is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Pots For Guitar (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
Reviewers Noted:
Well made . Sound quality
Features:
- Audio taper
- 3/8-32 us thread
- Split, fine 24-tooth, knurled, 1/4" diameter shaft
Reviewers Noted:
Good sound quality . Craftsmanship . Durability
Features:
- Low friction rotation
- 500k ohms/10% tolerance
- Each pot comes with hardware – 2 nuts & dress washer and lock washer
$4.14
5.0
Reviewers Noted:
Good sound quality . Craftsmanship . Durability
Features:
- Carbon element assists in providing enhanced durability to these amp pots
- 300° rotation allows you to control your electrical devices efficiently
- Comes with 2 nuts and 2 dress washers for a reliable fastening
$9.75
4.7
Reviewers Noted:
Craftsmanship . Ease of use . Durability
Features:
- 500k ohm audio taper, bourns mini pot, split shaft, with hardware.
- Same part as wd pdb-181-500.
Features:
- 3/4" bushing
- Includes pair of .022uf@400v orange drop polypropylene capacitors
- Low friction rotation
Reviewers Noted:
Good sound quality . Craftsmanship . Durability
Features:
- 500k split shaft audio taper pots – 3/8" bushing height and diameter
- Low friction rotation
- Coarse knurl 18-tooth shaft
$3.50
4.9
Reviewers Noted:
Craftsmanship . Good sound quality . Durability
Features:
- Bourns 3/8 inch bushing coarse knurled split shaft
- 300k b (linear taper)
- Full size 24mm
$4.68
4.9
Reviewers Noted:
Good sound quality . Craftsmanship . Durability
Features:
- Bourns 500k long split shaft audio taper pot – 3/4" bushing
- Low friction rotation
- Mounting hardware included – 2x nuts and 2x washers
Features:
- Cts 450g series, 250k, short (1/4" bushing) shaft, audio taper, 10% tolerance
- Low friction rotation
- For through pick guard and control plate mounts
$9.66
Features:
- Make sure this fits by entering your model number.
- Fits electric guitar.
- Made of metal alloy.
$118.39
4.7
Reviewers Noted:
Craftsmanship . Durability
Features:
- Solid shafts
- With nut, lock, and dress washer
- Manufactured by cts
Features:
- Genuine cts pots, the brand used by nearly every american guitar company for half a century!
- 500k 10% audio-taper, mimics the logarithmic way humans perceive changes in volume better than any other taper.
- 1/4" solid-shaft, designed for knobs with setscrews and 1/4" holes (metric knobs from imported guitars will not fit).
$25.91
Features:
- Great price! alpha potentiometers are among the world's most widely used guitar tone and volume controls. each pot has an aluminum split shaft that fits a coarse-knurled (18-spline) knob. 500k…
$8.22
Features:
- Metric full size 15mm split shaft a250k potentiometers audio taper.
- 6mm split shaft diameter.
- 15mm split shaft length.
$8.95
Features:
- 3/8-32 us thread
- Length of threaded bushing: 3/8"
- Length of shaft: 3/8"
$5.99
Features:
- 27mm length of threaded shaft
- 9mm shaft diameter
- 9.5 mmlenght axis of the nut
$5.95
Features:
- 500k cts vintage style audio pot
- 24 spline split, knurled shaft
- 3/8" threaded bushing height, includes hardware
Features:
- Split shaft with fine spline knurled; shaft length:18.5mm; shaft diameter: 6mm; base diameter: 24mm
- This pot was made in cts taiwan company, it was not made in cts usa company
- Cts company have several factories in usa and taiwan that all of them can produce guitar pots
Features:
- 3/8" height x 3/8" diameter bushing, 24 tooth fine spline .236" diameter shaft
- High quality brass bushing & brass c-clip reinforced shaft
- Spec'd to 525k with 10% tolerance
Features:
- High quality: the bass potentiometer is made of high-quality electronic components and precision craftsmanship to ensure durability, excellent workmanship, and a perfect replacement for the old or damaged ones. professional:…
1. Cts Taot Custom 500k Short Split Shaft Audio Taper Pots – Set Of Four (4x) – 10% Tolerance – 450g
Product Details:
Description these pots are suitable for both tone and volume. features are: 500k ohms / 10% tolerance. bakelite base plate. solid brass c-clip reinforced shaft. solid brass bushing 3/8-32 us thread. 3/8" short shaft bushing height. split, fine 24-tooth, knurled, 1/4" diameter shaft. chamfered shaft for easier knob installation and removal. each pot comes with nut, dress washer and lock washer. requires 3/8" diameter mounting hole.
Specifications:
| Package Dimensions | 4.29 x 2.83 x 1.06 inches |
| Is Discontinued By Manufacturer | No |
Reviews:
These are very nice pots. I put them in a stripped 2018 Gibson Les Paul Tribute I bought. What can I say, just good quality, didn't melt down internally when they were soldered like some OEM Gibson pots I have encountered. They should last for 30+ years, I have been using them almost 2 years now.javajiven
2. Set Of Four (4x) Bourns 500k Short Split Shaft Audio Taper Low Friction Potentiometers
Product Details:
This a short shaft pot (threaded bushing is 3/8" tall and 3/8" diameter, shaft is 1/4" diameter). pot is manufactured by bourns. note: 1. requires 3/8" diameter mounting hole 2. if you have an import guitar it is probably using metric sized components and these pots cannot be used without modifying the openings on your guitar.
Specifications:
| Package Dimensions | 4.02 x 2.99 x 0.79 inches |
| Is Discontinued By Manufacturer | No |
Reviews:
The price was good so I thought, what ta heck right! I was expecting scratchy sounding, buzzy pot that a solder can't stick to. Anyways to my surprise, it was smooth, I didn't hear any scratchy sound coming from the amp and it grounds well to eliminate the usual hum when soldered correctly, and the solder 60/40 stuck to the back of the pot well. CTS IS A JOKE, ITS OVERPRICED AND QUALITY ISN'T AS GOOD ANYMORE.yerkool
While Bourns makes clearly the best mini-pot in the business with it's hydraulic-feel and beautiful taper functionality, these standard sized pots lack the same feel. They're great in practice and overall function, but the feel of the pot when turning them is one of an almost scratchy-scrape feel which unfortunately isn't at the same quality-level as their mini-pots. I've purchased these now on several separate occasions, and all have the same scrape-feel, so while the mini-pots are always my first choice, these would definitely be a second choice if no other option was available. They're good, but not amazing.kenseeton6
3. Bourns Guitar & Amp Potentiometer 250k Linear Solid Shaft
Product Details:
Specifications:
| Body Diameter | 24 mm |
| Rotation | 300° |
| Power Rating | 0.25 watt |
| Maximum Operating Voltage | 250 V |
| Shaft diameter | 0.25" |
Reviews:
The price was good so I thought, what ta heck right! I was expecting scratchy sounding, buzzy pot that a solder can't stick to. Anyways to my surprise, it was smooth, I didn't hear any scratchy sound coming from the amp and it grounds well to eliminate the usual hum when soldered correctly, and the solder 60/40 stuck to the back of the pot well. CTS IS A JOKE, ITS OVERPRICED AND QUALITY ISN'T AS GOOD ANYMORE.yerkool
While Bourns makes clearly the best mini-pot in the business with it's hydraulic-feel and beautiful taper functionality, these standard sized pots lack the same feel. They're great in practice and overall function, but the feel of the pot when turning them is one of an almost scratchy-scrape feel which unfortunately isn't at the same quality-level as their mini-pots. I've purchased these now on several separate occasions, and all have the same scrape-feel, so while the mini-pots are always my first choice, these would definitely be a second choice if no other option was available. They're good, but not amazing.kenseeton6
4. Bourns 500k Mini Pot
Product Details:
Specifications:
| Watchers | 1 |
| Made In | Mexico |
Reviews:
I will be purchasing more in the future. Very easy to use and work very well. Smooth adjustments.kylmelo-0
Actually I was shocked. Normally I have to add a capacitor in the wiring harness line to achieve volume or treble bleed in my bass guitar upgrades but that is not necessary with these posts as it is already built in. In addition separate tone and volume pots are not necessary as these are interchangeable. It is about time. Keep up the good work Bourns.bobroe-x6gbxg
5. Bourns 500k Long Split Shaft Audio Taper Low Friction Potentiometers Set Of Four (4x) & Pair Of Orange Drop Capacitors
Product Details:
Electronics by the art of tone. this a long shaft pot (threaded bushing is 3/4" tall and 3/8" diameter, shaft is 1/4" diameter). pot is manufactured by bourns. note: 1. requires 3/8" diameter mounting hole 2. if you have an import guitar it is probably using metric sized components and these pots cannot be used without modifying the openings on your guitar.
Specifications:
| Is Discontinued By Manufacturer | No |
6. Bourns Guitar & Amp Potentiometer 500k Audio Knurled Split Shaft
Product Details:
Specifications:
| Tolerance | ±20 % |
| Maximum Operating Voltage | 250V |
Reviews:
The price was good so I thought, what ta heck right! I was expecting scratchy sounding, buzzy pot that a solder can't stick to. Anyways to my surprise, it was smooth, I didn't hear any scratchy sound coming from the amp and it grounds well to eliminate the usual hum when soldered correctly, and the solder 60/40 stuck to the back of the pot well. CTS IS A JOKE, ITS OVERPRICED AND QUALITY ISN'T AS GOOD ANYMORE.yerkool
While Bourns makes clearly the best mini-pot in the business with it's hydraulic-feel and beautiful taper functionality, these standard sized pots lack the same feel. They're great in practice and overall function, but the feel of the pot when turning them is one of an almost scratchy-scrape feel which unfortunately isn't at the same quality-level as their mini-pots. I've purchased these now on several separate occasions, and all have the same scrape-feel, so while the mini-pots are always my first choice, these would definitely be a second choice if no other option was available. They're good, but not amazing.kenseeton6
7. Bourns Guitar & Amp Potentiometer, 300k Linear, Knurled Split Shaft
Product Details:
Bourns guitar pots. these are drop in replacement components.br br featuresbr low torquebr carbon elementbr 14 knurled split shaftbr 38 bushing width 38 bushing lengthbr tolerance 20 br power rating 0.25 wattbr maximum operating voltage 250 vbr br bourns series number pdb241-gtrbr b features bourns guitar and amplifier pots. these are drop in replacement components. low torque carbon element 14 knurled split shaft 38 bushing width 38 bushing length tolerance 20 power rating 0.25 watt maximum operating voltage 250 v bourns series number pdb241-gtrb
Specifications:
| Tolerance | ±20 % |
| Maximum Operating Voltage | 250V |
| Year | 2021 |
Reviews:
The price was good so I thought, what ta heck right! I was expecting scratchy sounding, buzzy pot that a solder can't stick to. Anyways to my surprise, it was smooth, I didn't hear any scratchy sound coming from the amp and it grounds well to eliminate the usual hum when soldered correctly, and the solder 60/40 stuck to the back of the pot well. CTS IS A JOKE, ITS OVERPRICED AND QUALITY ISN'T AS GOOD ANYMORE.yerkool
While Bourns makes clearly the best mini-pot in the business with it's hydraulic-feel and beautiful taper functionality, these standard sized pots lack the same feel. They're great in practice and overall function, but the feel of the pot when turning them is one of an almost scratchy-scrape feel which unfortunately isn't at the same quality-level as their mini-pots. I've purchased these now on several separate occasions, and all have the same scrape-feel, so while the mini-pots are always my first choice, these would definitely be a second choice if no other option was available. They're good, but not amazing.kenseeton6
8. Bourns 1x 500k Long Split Shaft Audio Taper Low Friction Potentiometer
Product Details:
Bourns 500k long split shaft audio taper pot – 3/4" bushing low friction rotation mounting hardware included – 2x nuts and 2x washers 18 tooth course spline shaft bourns 500k long split knurled shaft audio taper potentiometer with low friction rotation. this a long shaft pot (threaded bushing is 3/4" tall and 3/8" diameter, shaft is 1/4" diameter). pot is manufactured by bourns. note: 1. requires 3/8" diameter mounting hole 2. if you have an import guitar it is probably using metric sized components and this pot cannot be used without modifying the openings on your guitar.
Specifications:
| Product Dimensions | 3.5 x 2 x 1 inches |
| Is Discontinued By Manufacturer | No |
Reviews:
The price was good so I thought, what ta heck right! I was expecting scratchy sounding, buzzy pot that a solder can't stick to. Anyways to my surprise, it was smooth, I didn't hear any scratchy sound coming from the amp and it grounds well to eliminate the usual hum when soldered correctly, and the solder 60/40 stuck to the back of the pot well. CTS IS A JOKE, ITS OVERPRICED AND QUALITY ISN'T AS GOOD ANYMORE.yerkool
While Bourns makes clearly the best mini-pot in the business with it's hydraulic-feel and beautiful taper functionality, these standard sized pots lack the same feel. They're great in practice and overall function, but the feel of the pot when turning them is one of an almost scratchy-scrape feel which unfortunately isn't at the same quality-level as their mini-pots. I've purchased these now on several separate occasions, and all have the same scrape-feel, so while the mini-pots are always my first choice, these would definitely be a second choice if no other option was available. They're good, but not amazing.kenseeton6
9. Cts Strat Pots W Orange Drop Capacitor Multi
Product Details:
These are from cts's 450g series made specifically for guitar. high quality construction and reliability make them a great choice. the 1/4" bushing height and 250k resistance make them a great choice for replacing or upgrading electronics in fender strats. includes a new sprague orange drop .047uf/400v cap. please note! these pots require a 3/8" mounting hole and are not compatible with guitars using metric components.
Specifications:
| Is Discontinued By Manufacturer | No |
10. Musiclily Guitar Full Size Pots B500k Split Knurled Long 18mm Shaft Linear Taper
Product Details:
Store categoriesstore categoriesn–us-1 stockn–us-2 stockn–pickupsn–guitar pickupn–bass pickupn–pickup covern–pickup ringn–acoustic guitar eq pickupn–pickguardn–strat pickguardn–strat backplaten–lp pickguardn–lp backplaten–tele pickguardn–esquire pickguardn–epiphone pickguardn–squier backplaten–pickguard materialn–acoustic guitar pickguardn–prewired pickup pickguardn–jazz bass pickguardn–p bass pickguardn–mm bass pickguardn–jaguar pickguardn–jazzmaster pickguardn–mustang pickguardn–sg pickguardn–machine headsn–guitar machine headsn–bass machine headsn–machine heads partsn–electronic partsn–jackn–switchn–capacitorn–potentiometern–converter plugn–knobsn–metal knobsn–plastic knobsn–bridgen–tune-o-matic bridgen–6 string guitar bridgen–tremolo system partsn–fixed bridgen–bass bridgen–other bridgen–bridge partsn–bridge pinsn–end pinsn–stringsn–guitar stringsn–bass stringsn–other strin.
Specifications:
| Split Shaft Diameter | 6mm |
| Split Shaft Length | 18mm |
| Whole Length | 29mm |
| Base Diameter | 23mm |
11. Cts 500k Solid Shaft Audio Pot Bulk Pack
Product Details:
Solid shaft potentiometer provides a high quality part for your electric guitar, whether you're using it as a replacement part, or to go with your humbuckers if you're building your own. the cts pot features a logarithmic taper to help reduce bunching of volume and tone that occurs at its end trip, as well as helping to improve the overall performance of your guitar.
Reviews:
Worked n fit great. Also arrived on time as well for a project I was working on.ctaylor169
Excellent value. As expecteddajo-465
Very good quality and finishing. No failures at all. Never failgilvalcoi
12. 500k Audio Pot Pack, Cts, Low Torque (.5" Bushing; Solid Shaft) (4 Pack)
Product Details:
Genuine cts pots, the brand used by nearly every american guitar company for half a century! 500k 10% audio-taper, mimics the logarithmic way humans perceive changes in volume better than any other taper. 1/4" solid-shaft, designed for knobs with setscrews and 1/4" holes (metric knobs from imported guitars will not fit). 3/8-32 bushing thread is 3/8" diameter, 1/2" long. for rear-routed guitars, this bushing length provides enough threads to pass through the guitar's top and still allow for hardware installation. cts low torque design (dimpled back) is easy to turn, this is the style used on fenders since the 1950s. p 500k audio taper (logarithmic) br solid-shaft (setscrew knobs) br 1/4" shaft diameter br 3/8-32 uts bushing thread br 1/2" bushing length br low torque (dimpled back – easy to turn, like fender pots) – this particular pot is designed for rear-rout applications, where the pot bushing needs to be long enough to pass through the guitar's top while still allowing enough threaded length to use the appropriate nuts and washers, (which are included). most rear-routed guitars are designed with a 1/4" or 6mm top thickness, and the longer 1/2" threaded bushing on these pots makes them perfect for these rear-rout applications. – be advised: these pots have 1/4" diameter shafts (6.35mm), and they are designed for knobs that are held on with a setscrew. most imported guitars that have setscrew knobs come with metric pots with 6mm shafts – and accordingly, they come with knobs with 6mm holes – and these knobs will not fit on our pots unless the hole in the knob is enlarged to 1/4". while this might seem like no big deal, in practice it's not something the average consumer will find trivial. a drill bit that grabs a metal knob and spins it in the hand risks cutting the hand, and especially if it has a setscrew sticking out on one side. unless you have a drill press and a way to hold the knob from spinning without marring it, you might find it advisable to buy new knobs.
Specifications:
| Package Dimensions | 3.46 x 2.95 x 1.14 inches |
13. Alpha Control Pots, 250k-Ohm – 4 Pack
Product Details:
Great price! alpha potentiometers are among the world's most widely used guitar tone and volume controls. each pot has an aluminum split shaft that fits a coarse-knurled (18-spline) knob. 500k pots are standard controls for humbuckers, and 250ks are usually used for single-coil pickups. a 250k gives a slightly warmer tone than a 500k, and bleeds off (attenuates) some of the high frequencies to ground. shaft diameter: 6mm split shaft, coarse knurling thread: m8 x 0.75 threaded portion height: 3/8 inch (9.52mm) required mounting hole diameter: 5/16 inch(7.94mm) alpha pots are audio taper with standard 20% resistance tolerance. each pot includes a flat washer, lock washer, and two hex mounting nuts for custom height adjustment on a pickguard or control plate. which pot value should you choose? 500k pots are standard controls for humbuckers, and 250ks are usually used for single-coil pickups. a 250k gives a slightly warmer tone than a 500k, and bleeds off some of the high frequencies to ground. a 1-meg pot bleeds off even less than a 500ktry one if you want to hear your guitar "wide open." 1-meg pots are also ideal for piezo pickups, as the ultra high impedance piezo element is more adversely effected by conventional, lower-value pots than magnetic pickups. 25k pots are for controlling the volume or tone of active pickups, or for use after the preamp of a piezo-saddle transducer bridge.
14. 2 Full Size Pots A250k Split Shaft Guitar Potentiometers
Product Details:
Metric full size 15mm split shaft a250k potentiometersaudio taper,250k ohm,6mm split shaft diameter,15mm split shaft length. full size, whole length: 29mm. base diameter: 23mm.fits 6.0mm diamerter metric knobs.metric size is popular in guitars bass made outside the usa/mexico.sold individually.
Specifications:
| Whole Length | 29MM |
| Base Diameter | 23MM |
15. Wd Music Wd500pp 500k Pot Push Pull
Product Details:
Specifications:
| Finish | N / A |
| Year | 2014 |
16. Cts 250k Vintage Style Solid Audio Pot
Product Details:
As such, this item may arrive without retail packaging. 250k ohm audio pot, cts, vintage style, solid shaft with nut, lock and dress washer.bushing threads = 3/8-32bushing length = 1/4"solid shaftprofessional installation is strongly recommended. improper installation may result in damage to the product and/or instrument.
Specifications:
| Finish | Metal |
| Year | 2010s |
17. Cts 500k Vintage Style Split Audio Pot Bulk Pack
Product Details:
Cts has long been the gold standard for guitar potentiometers and i use them in all of my instrument builds. this listing is for a matched set of four 500k audio taper split shaft pots. this particular set is a lower actual value.all potentiometers i sell have been measured with a fluke 289 multimeter to accurately measure the specific value of each potentiometer. i purchase these in bulk and then measure each one and lightly engrave the actual value on the side of the pot casing. what "matched" means:the defined value of the potentiometers sold in quads are within 1% of each other.
Specifications:
| Watchers | 5 |
| Made In | Taiwan |
18. Cts 500k Electric Guitar Pots Guitar Linear Potentiometer B500k
Specifications:
| Package Dimensions | 7.87 x 2.09 x 0.94 inches |
| Is Discontinued By Manufacturer | No |
| Number of Strings | 6 |
19. Cts Taot Custom 525k Short Shaft Audio Pots – 500k – Set Of 4 (4x) + Caps
Product Details:
At 10% tolerance the value of these pots can range from 475k to 575k, and the majority of these pots will be much closer to the 525k spec. this means no exceptionally low or high resistance pots that can be found when using typical 20% tolerance 500k pots. the only thing that might make these pots better is if they came with bacon. 525k ohms/10% tolerance (value can range from 475k to 575k) audio taper bakelite base plate solid brass c-clip reinforced shaft solid brass bushing 3/8-32 us thread 3/8" (short shaft) bushing height split, fine 24-tooth knurled shaft 1/4" diameter shaft each pot comes with hardware – nut, dress washer and lock washer requires 3/8" diameter mounting hole pot is maufactured and branded by cts specifically for the art of tone (taot), part # 450s525kxl taot. note: 1. if you are uncertain whether your guitar uses short (3/8") or long (3/4") shaft pots, as a general rule this pot will fit most usa-made gibson les paul's manufactured before 1977, gibson historic reissues, prs and hamer guitars, but please double check before you order. 2. make sure to pinch the tip of the shaft before you try fitting a knob, this will avoid getting knobs stuck before you install the pot. if you've ever had that happen… 3. if you have an import guitar it is probably using metric sized components and these pots cannot be used without modifying the openings on your guitar.
Specifications:
| Package Dimensions | 3.66 x 2.68 x 1.18 inches |
| Is Discontinued By Manufacturer | No |
20. Bass Guitar Potentiometer Dual Pots Stacked Concentric Potentiometer Volume Tone Pots With Center Locator Musical Instrument Accessories
Product Details:
High quality: the bass potentiometer is made of high-quality electronic components and precision craftsmanship to ensure durability, excellent workmanship, and a perfect replacement for the old or damaged ones. professional: professional quality uses high-performance bass potentiometer, electric guitar audio switch, high-end electric bass. stable performance, this is a potentiometer dedicated to bass. smooth adjustment: the rotation is very smooth, which improves the adjustment sensitivity. low friction rotation, left and right rotation position, is a high-quality bass potentiometer. ideal accessory: high-quality audio potentiometer, very suitable for replacing and upgrading volume and tone control, is a high-quality metal musical instrument accessory. service guarantee: our service concept is to provide you with the best quality products and sales services. specification: /b br item type: bass potentiometer br material: metal br br package list: /b br 1 x bass potentiometer br p br /p
