Baritone Guitar Neck Replacement For Sale (2024 Update)

Crafted at our ensenada, mexico, manufacturing facility, this genuine fender baritone sub-sonic stratocaster guitar neck will convert your standard scale length guitar into a 27.5 scale length baritone! features a comfortable "modern c" profile and 9.5"-radius maple fingerboard with 22 medium jumbo frets. the nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. your local fmic authorized service center can install genuine replacement necks.

Crafted at our ensenada mexico manufacturing facility this genuine fender baritone subsonic stratocaster guitar neck will convert your standard scale length guitar into a 27 scale length baritone! features a comfortable modern c profile and 9.5 radius pau ferro fingerboard with 22 medium jumbo frets. the nut is preslotted with pilot string location grooves to make spacing a breeze when performing the final string slot filing and a satin finish on the back offers smooth playability. this replacement neck is for a fender or squier by fender guitar.

Ideal for b to b tuning. features a comfortable modern c profile and 9.5-radius fingerboard with 22 medium jumbo frets. the nut is pre-slotted with pilot string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.

1. this guitar neck is compatible for fender st-style electric guitar neck replacement. 2. high-quality maple neck, delicate and unique. 3. fingerboard with 22 frets, smooth and high density. 4. adjustable truss rod has been installed at the headstock. 5. the hole for the tuning machine is 10mm in diameter. p descriptions: br / frets: 22 frets br / neck: canadian maple neck br / fingerboard: rosewood br / nut: 42mm nut br / back midline: rosewood br / color: matte yellow br / peg holes diameter: 10 mm / 0.4 inch br / neck length: 665mm / 26.18 in br / heel width: 56mm/2.2in br / heel depth: 20mm-26mm(with fingerboard) br / neck weight: 590g/20.8oz – package included: br / 1*guitar neck /p

1pcs electric baritone guitar neck 27 inch scale length neck wood:canada hard maple fretboard wood: rosewood finish: unfinished inlay: no inlaid side dots: left side dots 27 inch if you need any scale length please contact me. frets: 22 jumbo nickel/silver frets truss rod adjust: at headstock or bottom nut:42mm heel:56mm

This solo guitar neck is intended as a replacement or diy project. neck specifications may have a +/- 1 or 2mm variance. if using this neck with a non solo body / solo hardware, slight modifications may be necessary in order to achieve a proper fit. this neck is unfinished and comes pre-sealed with a poly-resin sealer. features maple neck rosewood fretboard 12′′ radius 22 frets 2-way truss rod mop dot inlays & side markers 27" scale length nut width: 1 5/8′′ thickness at nut: 13/16′′ thickness at 12th fret: 15/16′′ width at 12th fret: 2 1/16′′ item shown: solo tc style 22 fret maple baritone guitar neck model #: sl-tcnr22-ba-u upc: 842561010254

This solo guitar neck is intended as a replacement or diy project. neck specifications may have a +/- 1 or 2mm variance. if using this neck with a non solo body / solo hardware, slight modifications may be necessary in order to achieve a proper fit. this neck is unfinished and comes pre-sealed with a poly-resin sealer. features maple neck maple fretboard 12′′ radius 22 frets 2-way truss rod mop dot inlays & side markers 27" scale length nut width: 1 5/8′′ thickness at nut: 13/16′′ thickness at 12th fret: 15/16′′ width at 12th fret: 2 1/16′′ item shown: solo st style 22 fret maple baritone guitar neck model #: sl-stnm22-ba-u upc: 842561010247

The newest aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. designed to work with lower tunings by increasing the scale length of the whole instrument. it is designed to be an aftermarket fit with most stratocasters, telecasters, and jazzmasters. it comes with everything you need to replace your current neck with one from rgi. it will move the scale from a 25.5" to a 27.75", allowing for lower tuning without increasing string gauge. this neck is built and ready to ship today! neck specs: material: 6061 solid billet aluminum scale: 25.5” extended length to 27.75" nut width: 1 11/16” frets: 24 stainless steel medium/medium fretboard radius: 12” tuners: 3+3 sperzel locking nut: 6061 aluminum (cut for heavy gauge strings)(0.013", 0.020", 0.024", 0.035", 0.046", and 0.056") heel pocket: fender strat style (5/8” deep, 2.18” heel width, 3” total length, 5” radius heel curve) thickness: .700” at nut, .725” at 7th fret, .740” at 12th fret .760” at 15th fret neck shape: very flat u shape, maximum thinness without structural loss, no tapered heel includes: 4 stainless steel 1 1/2 “ 10-24 mounting bolts, backplate, buffing compound, and 2 microfibre cloths

Description neck wood: mahogany fretboard wood: rosewood finish: unfinished inlay: no inlaid scale length:27". if you need other scale length please contact me. tuner hole size: about 11/32 mm" width at heel: about 56+-0.5mm frets: 24 nickel/silver frets truss rod adjust: at headstock or bottom payment we appreciate quick payment and look forward to helping you with your musical instrument needs in the future. payment method: accept the following forms of payment via our secure system: paypal (visa, master, american express, discover, debit, and bank transfer) credit / west union credit / west union: please contact us if you like the in this way to pay. we recommend you by the paypal. checkout: after winning an item in an auction or a "buy it now" purchase, click on the checkout now button to immediately proceed with the checkout and payment process. you will be directed to our third party checkout system. delivery details return for refund: if you are not completely satisfied with your purc

Welcome to my store fit diy electric guitar or neck replacement,paddle head , neck wood: canada hard maple fretboard wood: rosewood fretboard finish: unfinished inlay: no inlay side dots: left side dots scale length: 30inch . if you need other scale length please contact me. frets: 22 nickel/silver fretstruss rod adjust: at headstock or bottom 42mm nut and 56mm heel width , for 6 string guitar project long scale. payment we appreciate quick payment and look forward to helping you with your musical instrument needs in the future. payment method: accept the following forms of payment via our secure system: paypal (visa, master, american express, discover, debit, and bank transfer) credit / west union credit / west union: please contact us if you like the in this way to pay. we recommend you by the paypal. checkout: after winning an item in an auction or a "buy it now" purchase, click on the checkout now button to immediately pro

This solo guitar neck is intended as a replacement or diy project. neck specifications may have a +/- 1 or 2mm variance. if using this neck with a non solo body / solo hardware, slight modifications may be necessary in order to achieve a proper fit. this neck comes with a satin finish features roasted maple neck roasted maple fretboard 12′′ radius 22 frets 2-way truss rod mop dot inlays & side markers 27" scale length nut width: 1 5/8′′ thickness at nut: 13/16′′ thickness at 12th fret: 15/16′′ width at 12th fret: 2 1/16′′ item shown: solo st style 22 fret roasted maple baritone guitar neck model #: sl-stn22-ba-rm-f upc: 842561010315

Product description electric guitar neck features: new electric guitar neck canada maple wood. neck wood: maple wood fretboard wood: rosewood fretboard finish: unfinished inlay: no inlaid scale length:27 inch. if you need other scale length please contact me. nut width: about 42mm and 56mm heel width frets: 24 nickel frets truss rod adjust: at headstock

27 1/2 inch maple neck with pau ferro fretboard. comes with some really awesome tuning machines that cut off the end of your strings. unfortunately, the mounting screws broke off, but they are not needed at all. great guitar neck, it was used in a concept build and selling because no longer needed. i had the nut professionally cut as well.

Hello all! this is a one-of-a-kind guitar neck. inspired by music man's silhouette bass guitar, it's a custom 30" scale. as a fretless neck it was crafted by usa custom guitars in 2015. the fretting job was done to my specs by my luthier (as was the headstock conversion to 4+2. this makes it also easier for the guitar to fit in standard cases). – roasted flame maple neck and fingerboard – 10" radius – 22 stainless steel jumbo frets – i think they're jescar – compensated bone nut (for a wound 3rd string, but could work also with plain string, though on this particular string it would response like a stadard nut) – tele specs heel – thin tung oil finish on the back of the neck, thicker on the headstock. – schaller locking tuners all this means that: you can add the neck to any standard tele neck pocket -and it will make a nice tight fit- but you will have to move back the bridge by appox. 1.262" or 32mm (and the bridge pickup at least, according to your liking).*if you ne…

The newest aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. designed to work with lower tunings by increasing the scale length of the whole instrument. it is designed to be an aftermarket fit with most stratocasters, telecasters, and jazzmasters. it comes with everything you need to replace your current neck with one from rgi. it will move the scale from a 25.5" to a 27.75", allowing for lower tuning without increasing string gauge. this neck is built and ready to ship today! neck specs: material: 6061 solid billet aluminum scale: 25.5” extended length to 27.75" nut width: 1 11/16” frets: 24 stainless steel medium/medium fretboard radius: 12” tuners: 3+3 sperzel locking nut: 6061 aluminum (cut for heavy gauge strings)(0.013", 0.020", 0.024", 0.035", 0.046", and 0.056") heel pocket: fender strat style (5/8” deep, 2.18” heel width, 3” total length, 5” radius heel curve) thickness: .700” at nut, .725” at 7th fret, .740” at 12th fret .760” at 15th fret neck shape: very flat u shape, maximum thinness without structural loss, no tapered heel includes: 4 stainless steel 1 1/2 “ 10-24 mounting bolts, backplate, buffing compound, and 2 microfibre cloths

The newest aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. designed to work with lower tunings by increasing the scale length of the whole instrument. it is designed to be an aftermarket fit with most stratocasters, telecasters, and jazzmasters. it comes with everything you need to replace your current neck with one from rgi. it will move the scale from a 25.5" to a 27.75", allowing for lower tuning without increasing string gauge. necks are built to order with your specifications, so expect up to a two month wait before receiving your neck. neck specs: material: 6061 solid billet aluminum scale: 25.5” nut width: 1 11/16” frets: 24 stainless steel medium/medium fretboard radius: 12” tuners: 3+3 sperzel locking nut: 6061 aluminum (cut for heavy gauge strings)(0.013", 0.020", 0.024", 0.035", 0.046", and 0.056") or cut to your specific gauges if specified heel pocket: fender strat style (5/8” deep, 2.18” heel width, 3” total length, 5” radius heel curve) thickness: .700” at nut, .725” at 7th fret, .740” at 12th fret .760” at 15th fret neck shape: very flat u shape, maximum thinness without structural loss, no tapered heel includes: 4 stainless steel 1 1/2 “ 10-24 mounting bolts, backplate, buffing compound, and 2 microfibre cloths frequently asked questions why aluminum? when looking for a neck, there are a lot of different variables to look at. structurally, a solid billet of aluminum will offer the most rigidity of the option possible. there is no truss rod or other materials to stress and strain during temperature or moisture changes. additionally, that additional strength can help with the wear and tear of tour, stages, and other bumps and bruises any guitar will have to sustain during it’s lifespan. sonically, the density of aluminum may give you an advantage with more sustain and over tones, since the neck won’t sympathetically vibrate with the strings. this is, as with anything, certainly up for debate as to what your ears hear and your hands feel. it’s worth noting that it will feel colder to the touch since aluminum is a better thermal conductor than wood, and it does noticeably weigh more. will this fit my guitar? yes: for the most part, if you’re running a telecaster, stratocaster, or jazzmaster, you should be able to bolt this neck directly onto the body. maybe not: if you are running a t-60, jaguar, mustang, or 72’ telecaster deluxe; you cannot run this neck without modifications due to scale and bolt pattern restrictions. if you are confused and unsure, contact a local luthier to help you with your project. it’s a worthy profession to support and you’ll learn new things. if you are considering a guitar not mentioned here, then i’m not sure. can i do the change over myself? yes: most seasoned guitarist can probably do this, yes. but read this: i have pre-drilled the necks and they are tapped with machine bolts. you may have to adjust neck angle, saddle heights, and intonate your guitar afterwords. if your action is still too loose for your preference, a luthier can help you with adjusting the nut string depths to a tighter playing style. the depths are set fairly high to allow for adjustment after installation. what is the 700 series? the 700 series is the first set of necks that i designed, named after the thickness at the nut for the design. i will be continuing this convention for each style going forward, so anything with this thickness will be in the 700 series, and further designs may be in a new series for their specific design requirements. can i get something custom? short answer, yes: i can make a neck for any project. in the recent past i’ve also made custom guitars, hand-wired tube amps, cabs, a few different pedals and even a pickup. custom, multiple runs: if you are a guitar builder and are interested in ordering a batch of necks custom fit and finished for your company or brand, please reach out. i can offer discounts for custom work at scale. fully custom, one-off builds: if you have your sights set on something fully custom, i’d be glad to chat with you about your needs. this process is expensive. the new neck would need to be prototyped, engineered, manufactured, and then finished, all with processes and measurements outside of my normal set-up. you’d be looking at at least a handful of months and a starting price around $5,000. can i get mine cheaper? faster? no affirm asked me to add this, if you use affirm please read this or something like that if you finance with affirm and if one or more items in

The newest aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. designed to work with lower tunings by increasing the scale length of the whole instrument. it is designed to be an aftermarket fit with most stratocasters, telecasters, and jazzmasters. it comes with everything you need to replace your current neck with one from rgi. it will move the scale from a 25.5" to a 27.75", allowing for lower tuning without increasing string gauge. this neck is built and ready to ship today! neck specs: material: 6061 solid billet aluminum scale: 25.5” extended length to 27.75" nut width: 1 11/16” frets: 24 stainless steel medium/medium fretboard radius: 12” tuners: 3+3 sperzel locking nut: 6061 aluminum (cut for heavy gauge strings)(0.013", 0.020", 0.024", 0.035", 0.046", and 0.056") heel pocket: fender strat style (5/8” deep, 2.18” heel width, 3” total length, 5” radius heel curve) thickness: .700” at nut, .725” at 7th fret, .740” at 12th fret .760” at 15th fret neck shape: very flat u shape, maximum thinness without structural loss, no tapered heel includes: 4 stainless steel 1 1/2 “ 10-24 mounting bolts, backplate, buffing compound, and 2 microfibre cloths

Build your own conversion neck! a conversion neck allows you to turn a 25.5" (fender) scale guitar into a 27.0" scale 22 fret baritone guitar without modifying the body or moving the bridge. available with either s or t-style heel / headstock. 1/2" mdf with engraved center lines and reference markings. requires neck blank minimum 27" x 4" (69cm x 10)

New electric guitar neck blank paddle head, 42mm nut width and 56mm heel width . canada maple wood neck with rosewood guitar fretboard. white block inlay . 12inch radius and c profile . used to diy guitar project.

Canadian maple electric guitar neck,pre-slotted beef bone nut. oil base clear lacquer on electric guitar neck for smooth feel. fingerboard with 24 medium(2.7mm) cupronickel fret wire,smooth fingerboard edge, no hand scratched. the effective chord length of the neck of the electric guitar is 25.5"(648mm),fingerboard radius 14"(356 mm) for more dimensions, you can refer to the picture or contact me. because replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. p notice: /p p this neck is suitable for professional players as it is unfinished and requires extra work. /p p for more detailed size, please refer to the picture, or contact me. /p p we provide personal customization, you can contact me if you need it. /p