Are you looking for the Bass Guitar Neck Relief? If so, you’ve come to the right place.
Choosing the Bass Guitar Neck Relief can be difficult as there are so many considerations, such as EMG, Taylor, WD Music, DiMarzio, Ibanez, Seymour Duncan, Fender, Stewart-MacDonald, Hondo, Solo Guitar. We have done a lot of research to find the top 20 Bass Guitar Neck Relief available.
The average cost is $99.08. Sold comparable range in price from a low of $6.99 to a high of $360.00.
Based on the research we did, we think Fender Precision Bass Neck, 20 Medium Jumbo Frets Maple is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Bass Guitar Neck Relief (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
$249.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- 734" (18.64 mm) headstock thickness
- 540" (13.71 mm) thickness at the 1st fret
- 800" (20.32 mm) thickness at the 12th fret
$186.20
4.3
Reviewers Noted:
Good sound quality . Attractive . Durable
Features:
- Type: fretless p-bass
- Neck: maple
- Fingerboard: ebonol
Reviewers Noted:
Well made . Easy to use . Attractive . Durability . Sound quality
Features:
- Perform and record clean lines without unwanted string noise.
- Easy to use, no tools or special installation required.
- Works for guitars, b, and other stringed instruments.
$252.00
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- This is the exact neck you'll receive!
- Weight – 1lbs 9.7oz.
- This replacement neck is for a fender or squier by fender guitar.
$249.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- 9.5”-radius paul ferro fingerboard
- "c"-shaped neck profile
- 20 medium jumbo frets; white dot inlays
$252.00
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- This is the exact neck you'll receive!
- Weight (sn mxe21562480) – 1lb 10.8oz.
- This replacement neck is for a fender or squier by fender guitar.
$360.00
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- Make sure this fits by entering your model number.
- Original fender.
- Package weight : 1.429 kg.
Reviewers Noted:
Ease of use . Durability
Features:
- Premium fretboard guards contour to all fretboards
- High quality stainless steel construction
- Ergonomic handle keeps your fingers from getting in the way
Features:
- Made of cork, will not damage the guitar neck.
- Suitable for most instruments with neck, guitars, basses, ukulele, mandolin, banjo and many more.
- Two height design can suit different instruments.
$10.05
3.4
Reviewers Noted:
Comfort
Features:
- Relief neck pain in just 10 minutes.
- Simple and effective physical solutions to sooth away stiff neck, helps in restoring proper cervical curvature associated with consistent use.
- Dense and soft foam design provides sturdy, lightweight, and comfortable base.
$8.27
Features:
- Color: light green.
- Material: metal.
- Size: about 45.1×0.9×0.9cm/17.76×0.35×0.35inch.
Features:
- Designed with 5 different heights and angles to cradle most string instruments
- Softgel material offers a cushioned support for the instruments
- This 5-in-1 cradle cube allows versatile usage
$125.00
Features:
- Here we have a vintage hondo bass neck with original tuners and string tree. the frets are in great shape and the truss rod works great to boot. restore your…
$79.00
Features:
- Description 1pcs electric guitar neck neck wood:canada hard maple fretboard wood: rose wood finish: unfinished inlay: block inlaid side dots: left side dots 30 inch if you need any scale…
Features:
- Unique headstock shape,you can diy your own electric bass well-constructed nut and horizontal fret level bring you comfortable playing experience and prevent the strings from buzzing. two-way adjustable truss rod…
Features:
- Eye catching designcolorful fretboard sticker is designed for beginner learner, it's easy to read and master chord.
- High quality materialthe stickers coated with a long lasting adhesive material that will not damage your fretboard.
- Funny guitar learningour guitar stickers is a good teaching tool for guitar teachers. it's a grateful tool for kids and beginners.
Features:
- Easy to use: relief neck pain, you will feel a lot more comfortable with your neck pain in just few minutes
- Triple effect: spine stretcher, shoulder, and back pain relief
Features:
- Tools by outback designs. details:outback designs nylon guitar neck shims.
- Introducing ★outback designs’ protective bolt-on guitar plate★.
- This nylon material provides improved durability and effectiveness over standard wooden guitar neck…
Features:
- Everything you need to measure and adjust your neck relief on all martin guitars models except dss-2018, omss-2019, modern deluxe series
- Comes with a precision truss rod gauge, pick capo, 5mm truss rod wrench
Features:
- Pain relief — if suffering from chronic neck pain, herniated disks, upper body stiffness, neck pain, migraines, or arthritis symptoms, use the trigger point pillow to relieve neck and shoulder…
1. Fender Precision Bass Neck, 20 Medium Jumbo Frets Maple
Product Details:
This official fender standard series precision bass maple neck has a modern c profile, 9.5" fretboard radius, 20 medium jumbo frets and a gloss urethane finish on the front with a satin finish on the back of neck for smooth playability. the synthetic bone nut is pre-slotted with 'pilot' string slots to make spacing a breeze when performing the final string slot filing, the headstock is drilled for standard fender mexico tuners and has access to the truss rod adjustment nut. this replacement neck fits fender or squier curved heel end bass guitars. some fret levelling/dressing and polishing may be required and minor woodwork to fit the neck to the body. please note the photo displayed is an example image only and the wood grain and serial number will differ on the neck you receive.
Specifications:
| Style | Modern |
| Neck Shape | Modern "C" |
| Tuner Mounting Configuration | Vintage-style 4-screw |
| Fingerboard Materials | Maple |
| Neck Material | Maple |
| Nut Material | Synthetic Bone |
| Position Inlays | Black Dot |
| Truss Rod Nut | 3/16" Hex Adjustment |
| Truss Rod | Standard |
| Fingerboard Radius | 9.5" (241 mm) |
| Scale Length | 34" (864 mm) |
| Nut Width | 1.625" (41.3 mm) |
| Number of Frets | 20 |
| Fret Size | Medium Jumbo |
| Headstock Thickness | .540" (13.71 mm) |
| Peg Hole Diameter | .734" (18.64 mm) |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
2. Mighty Mite Mm2919 P Bass Replacement Neck With A Fretless Ebonol Fingerboard
Product Details:
The mm2919 p-bass replacement neck is constructed of maple and a fretless ebonol fingerboard that has been given an oil-based finish. the mm2919 p-bass replacement neck is constructed of maple and a fretless ebonol fingerboard that has been given an oil-based finish. since the 1970s mighty mite has manufactured custom and replacement bass parts for luthiers, repairmen, and guitarists who cant wait to hot-rod their fender precision bass or p-style bass.
Reviews:
It took a while because the neck was back-ordered for months (not Musician's Friend's fault), but no muss, no fuss and now I have another fretless bass. It fit perfectly into the body … you will have to drill holes for the screws in the heel of neck where it mounts. Go to YouTube and search for "Dave's World of Fun Stuff – mounting a fretless neck." He uses this neck and will show you how to mount it. He used a Squier bass and I used a MiM body. I'd put the link in, but I fear that may be against the rules. The holes in the headstock for the bushing are 80mm, and the Hipshot HB7 tuner fit it perfectly. You can use a rat tail file, if need be, to slightly enlarge the holes for your original tuning machines if you're using them. Once mounted, I used my nut files and brought the strings to .015" above the fretboard. Get one … I've been playing fretless for over 20 years and its different and FUN!Garvoon
Neck bent under string tension. Mighty-mite warranty does not cover necks that have been installed. Waited too long hoping for response from MM before tried returning and ended up too late for returns. So, my bottom line is if you need kindling, you can probably find it cheaper somewhere else.All your bass
I swapped this in for a homemade P-bass. It feels and sounds great. Ebonal is a legit substitute for ebony. Combined with tapewound strings the feel is very slick, and the tone and sustain are both excellent. It isn't the most stable of necks; I have to adjust the truss rod twice a week to keep it straight. Also, the nut is way way too high for good intonation in positions I-III. The best thing to do is remove it (look online for how-to. It's not difficult, just takes a well-placed strike and some nerve) and file the base down with sandpaper on a block. Glue it back in (with Elmer's, so you can remove it again in the future) and let the strings clamp it in place. I lowered mine so the strings are now .030" from the fingerboard. A lot of people go even lower than that. TL;DR: great value for the price. With patience and care, you'll wind up with a very playable fretless bass.the round mound of sound
3. Gruv Gear Fretwraps String Muter, 1-Pack Black Medium
Product Details:
Md – fits 5-string basses & 6-string classical guitars string muting goodness. now in single serve. our world-famous fretwraps are now available in single packs! effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. the adjustable strap lets you fine-tune the pressure and dampening of the strings. quickly slides over the headstock when not in use. no special guitar modification, installation, or tools required – yet amazingly effective!
Specifications:
| Product Dimensions | 1 x 2.25 x 5.5 inches |
| Country of Origin | China |
| Is Discontinued By Manufacturer | No |
| Color Name | Black |
Reviews:
I spent 15-20 minutes on the phone attempting to get info on the correct size Fret Wrap. I didn't. The CS person said this one would work. It's too small and depresses the strings rather that just muffling them. I play Ibanez and Fender electrics – so the necks are already pretty small at the nut. The medium size would have been the correct choice. So I can't NOT recommend them. Just get the right size for your needs.YeahOK
As a bass player, Ive finally gotten around to working on the small, but important, parts of my bass playing: cleaning up my sound. Especially while playing fast notes, high up on my bass and without a floating thumb, Ive had too much clutter coming from strings which were ringing sympathetically. Gruv Fretwraps has been a godsend to alleviate that. Is it a crutch? I dunno. Im not paid to be a Puristrcharlesphoto
4. Fender Player Series Precision Bass Neck, 20 Medium-Jumbo Frets, 9.5" Radius, Maple
Product Details:
Crafted in the ensenada, mexico, manufacturing facility, this genuine fender player series jazz bass guitar neck features a comfortable "modern c" profile and 9.5"- radius fingerboard with 20 medium jumbo frets. the nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. for true fender authenticity, it's also serialized and stamped, with a genuine fender logo headstock decal. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
| Fingerboard Radius | 9.5" (241 mm) |
| Refinement Fingerboard Radius | Modern |
| Fret Size | Medium Jumbo |
| Neck Material | Maple |
| Refinement Neck Material | Maple |
| Neck Shape | Modern "C" |
| Refinement Neck Shape | C Shape |
| Number of Frets | 20 |
| Nut Material | Synthetic Bone |
| Scale Length | 34" (86.36 cm) |
| Neck Mounting | 4-Bolt |
| Tuner Mounting Config | 4-Screw Mount |
| Instrument Type | Precision Bass |
| Peg Hole Diameter | 734” (18.64 mm) |
| Headstock Thickness | 540” (13.71 mm) |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
5. Fender Standard Series Precision Bass Neck – Pau Ferro Fingerboard
Product Details:
This is an open-box fender neck. there's a single hole drilled near the low e tuner on the back of the headstock. crafted at the fender ensenada, mexico manufacturing facility, this genuine fender precision bass neck features a comfortable "c"-shaped profile and 9.5"-radius pau ferro fingerboard with 20 medium jumbo frets. the synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. this replacement neck is the perfect way to give your p bass authentic fender feel.
Specifications:
| Compatibility | Standard Series Precision Bass Guitar |
| Neck Shape | Modern "C" |
| Tuner Mounting Config | Modern 4-Screw |
| Fingerboard Material | Pau Ferro |
| Neck Material | Maple |
| Nut Material | Synthetic Bone |
| Position Inlays | White Dots |
| Neck Finish | Satin Urethane |
| Truss Rod Nut | 3/16" Hex Adjustment |
| Truss Rod | Standard |
| Fingerboard Radius | 9.5" (24.13cm) |
| Scale Length | 34" (86.36cm) |
| Nut Width | 1.62" (4.11cm) |
| Number of Frets | 20 |
| Fret Size | Medium Jumbo |
| Headstock Thickness | 0.540" (13.72mm) |
| Neck Thickness | 1st Fret – .800" (mm), 12th Fret – .900" (mm) |
| Peg Hole Diameter | 0.734" (18.64mm) |
| Dimensions | 3.4 x 7.3 x 37.4" (8.64 x 18.54 x 95.00cm) |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
6. Fender Player Series Precision Bass Neck, 20 Medium-Jumbo Frets, 9.5" Radius, Pau Ferro
Product Details:
Crafted at our ensenada, mexico, manufacturing facility, this genuine fender player series precision bass guitar neck features a comfortable modern c profile and 9.5-radius maple or pau ferro fingerboard with 20 medium jumbo frets. the nut is pre-slotted with pilot string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. for true fender authenticity, it's also serialized and stamped, with a genuine spaghetti logo headstock decal. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
| NECK MATERIAL | Maple |
| NECK SHAPE | Modern "C" |
| NECK MOUNTING | 4-Bolt |
| FINGERBOARD RADIUS | 9.5" (241 mm) |
| FINGERBOARD MATERIAL | Pau Ferro |
| POSITION INLAYS | White Dot |
| SIDE DOTS | White |
| NUMBER OF FRETS | 20 |
| TRUSS ROD | Standard |
| TRUSS ROD NUT | 3/16" Hex Adjustment |
| STRING NUT | Synthetic Bone |
| NUT WIDTH | 1.625" (41.3 mm) |
| NUT MATERIAL | Synthetic Bone |
| TUNER MOUNTING CONFIG | 4-Screw Mount |
| FRET SIZE | Medium Jumbo |
| SCALE LENGTH | 34" (86.36 cm) |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
7. Fender Vintera '50's Precision Bass Roasted Maple Neck
Product Details:
There's no denying the allure of a roasted maple neck. resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument's voice. this genuine fender precision bass neck is crafted at our ensenada, mexico manufacturing facility. featuring a "vintage c" neck profile and 7.25"-radius maple fingerboard with 20 vintage frets, for classic playing feel. the synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. the perfect way to give your precision bass authentic fender feel, this replacement neck even sports our famous "spaghetti" logo on the headstock.
Specifications:
| Neck Material | Roasted Maple |
| Neck Shape | Vintage “C” |
| Fingerboard Radius | 7.25” (184.1 mm) |
| Scale Length | 34” (864 mm) |
| Number of Frets | 20 |
| Fret Size | Vintage |
| Nut Material | Synthetic Bone |
| Nut Width | 1.75” (44.45 mm) |
| Truss Rod | Vintage-Style Butt Adjust |
| Truss Rod Nut | Vintage-Style Slotted |
| Tuner Mounting | Vintage-style 4-screw |
| Peg Hole Diameter | .734” (18.64 mm) |
| Headstock Thickness | .540” (13.71 mm) |
| Neck Mounting | 4-Bolt |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
8. Music Nomad Grip Guards – Premium Fretboard Guards Mn225
Product Details:
Polishing frets on your guitar, bass, ukulele or other fretted instrument is a breeze with music nomad's patent pending grip guards. music nomad’s grip guards are precision crafted producing an ultra smooth stainless steel surface material, which is nonmagnetic, corrosion resistant and heat resistant. the grip guards were engineered with a curved radius that contours to your fretboard for a precise fit. the ergonomic profiled handle makes fret work easier saving valuable time. say goodbye to taping fretboards. music nomad’s grip guards includes 3 different sized guards that work on all stringed instruments and includes 1 small, 1 medium and 1 jumbo slot sized guards. when it comes to working on your instrument, choose the right tools for the job, you’ll be glad you did.
Specifications:
| Product Dimensions | 4.75 x 0.25 x 8 inches |
| Country of Origin | China |
| Is Discontinued By Manufacturer | No |
Reviews:
Another awesome product from Mannys, needed this asap and was delivered earlier that I expected.Wayne F.
Great tool and with a range of slot widths makes it easy to pick the best one for your fretboard.Reviewed by Andertons Music Co.
9. Mr.power Guitar Neck Rest Neck Pillow String Instrument Neck Support Luthier Tool
Product Details:
Made of cork, will not damage the guitar neck. suitable for most instruments with neck, guitars, basses, ukulele, mandolin, banjo and many more. two height design can suit different instruments. mr.power guitar neck rest is made of corkwood. suitable for most instruments with neck, guitars, basses, ukulele, mandolin, banjo and many more. it can support the neck steadily, and the cork will not damage the neck. two height design can suit different instruments.
Specifications:
| Product Dimensions | 4.53 x 3.94 x 3.35 inches |
| Is Discontinued By Manufacturer | No |
Reviews:
The neck rest I got was completely different and didn't come with the file set.jacbar_7981
10. Neck And Shoulder Relaxer, Cervical Traction Device For Tmj Pain Relief Blue
Product Details:
Relief neck pain in just 10 minutes. simple and effective physical solutions to sooth away stiff neck, helps in restoring proper cervical curvature associated with consistent use. dense and soft foam design provides sturdy, lightweight, and comfortable base. can't be used as an ordinary pillow all night long. normally you will need 1-3 days to adapt to this pillow, because your neck needs time to familiar with the new corrector curvature. you will enjoy an extreme comfort after you get used to it!
Specifications:
| Size | 1 Count (Pack of 1) |
Reviews:
It is a harder texture than I was expecting. It had relieved the pain in my shoulder. I can't lay on it too long.Psyseth
11. Nuolux Guitar Rod Neck Truss Relief Adjustment Bass Electric Single Action Acoustic Tool Strat, Size: 17.76×0.35×0.35 In
Product Details:
Description are you looking for a professional, yet affordable guitar lever? are you in search of a sturdy, trustworthy tool that can do multiple jobs at once? if yes, look no further! our professional guitar lever must meet you needs. it is one of the best choices for you. features –
Specifications:
| Assembled Product Weight | 0.22 lb |
| Assembled Product Dimensions (L x W x H) | 17.76 x 0.35 x 0.35 Inches |
12. Music Nomad Mn206 Cradle Cube Neck Support
Product Details:
What every guitar builder needs. forget using a pillow or your lap to support your string instrument while you work. musicnomad has developed a better way to work on your string instrument. the 5-in-1 cradle cube neck support is made of an innovative soft gel material to gently yet fully support either side of the neck. with 5 varying heights and angles, it works great for all string instruments—acoustic guitars, electric guitars, ukuleles, violins, banjos, mandolins and more. safe on all instrument finishes, our cradle cube helps you change strings quicker and do repairs and maintenance in a secure and sturdy way.
Specifications:
| Material | Softgel |
| Design | Cube |
| Color | Blue |
| Dimensions | 4.15" L x 4.15" W x 5.25" H |
| Weight | 0.59lb |
Reviews:
13. Hondo Vintage Bass Guitar Neck
Product Details:
14. Reverse Bass Guitar Neck 20fret 30inch Maple Rosewood Block Inlay
Product Details:
Description 1pcs electric guitar neck neck wood:canada hard maple fretboard wood: rose wood finish: unfinished inlay: block inlaid side dots: left side dots 30 inch if you need any scale length please contact me. frets: 20 jumbo nickel/silver frets truss rod adjust: at headstock or bottom nut:42mm heel:65 payment we appreciate quick payment and look forward to helping you with your musical instrument needs in the future. payment method: accept the following forms of payment via our secure system: paypal (visa, master, american express, discover, debit, and bank transfer) credit / west union credit / west union: please contact us if you like the in this way to pay. we recommend you by the paypal. checkout: after winning an item in an auction or a "buy it now" purchase, click on the checkout now button to immediately proceed with the checkout and payment process. you will be directed to our third party checkout system. delivery details return for refund: if you are
15. 20frets Paddle Style Electric Bass Neck,modern"c" Shape (Rosewood Fingerboard)
Product Details:
Unique headstock shape,you can diy your own electric bass well-constructed nut and horizontal fret level bring you comfortable playing experience and prevent the strings from buzzing. two-way adjustable truss rod helps stabilize the performance of your bass neck that is susceptible to humidity and tension from bass strings. canadian maple wood makes the sound more loud and clear.the effective chord length of the neck of the electric guitar is 34"(864mm),fingerboard radius 14"(356 mm) for more dimensions, you can refer to the picture or contact me. gloss urethane finish on fingerboard and headstock face; satin finish on back of neck. 1
16. Koldot Guitar Fretboard Stickers Fret Stickers For Acoustic Guitar Bass Guitar Note Stickers Chord
Product Details:
Make sure this fits by entering your model number. 【eye catching design】colorful fretboard sticker is designed for beginner learner, it's easy to read and master chord. 【 high quality material】the stickers coated with a long lasting adhesive material that will not damage your fretboard. 【no glue left】 the adhesive on the backside is clean and durable, can be removed / pasted many times. leaving no residue on fretboard, completely no harm to your loving guitar. 【funny guitar learning】our guitar stickers is a good teaching tool for guitar teachers. it's a grateful tool for kids and beginners. 【package】 coming with 2 pcs fretboard stickers.
Specifications:
| Package Dimensions | 6 x 4 x 0.25 inches |
| Number of Strings | 2 |
17. Hkml Neck And Shoulder Relaxer For Tmj Pain Relief And Cervical Traction Device For Spine Alignment, Neck Stretcher Chiropractic Pillow For Neck
Product Details:
Are you suffering from neck pain? prolonged bowing your head or improper sitting posture can cause stiff neck, neck and shoulder pain. you need an effective physical solution to help relieve neck pain and pressure, sore muscles, tmj and tension headache relief. studies found that neck traction devices for home use significantly reduced neck pain. choose our hkml neck pain relief device. it dramatically reduce your awful pain and stiffness without medication and unnecessary surgeries. neck relief in just 10-20 minutes. so how does our neck stretcher cervical traction work for neck pain relief? ergonomic design, the curve of neck relaxer matches the cervical spine. when you lie down, it offers vertical, horizontal support, and curvature stretch for neck traction, allowing the cervical traction pillow to position the head to reduce spinal pressure, support the cervical spine and help the c-shaped curve of the neck. the neck pain pillow is covered with breathable therapy cloth. it is not only sweat-resistant and cooling but also promotes blood circulation, also acts as neck hump corrector and neck posture corrector. firm polyurethane foam used in our neck decompression devices gives the neck stable and flexible support. it can be used on hard surfaces like floors and soft surfaces like sofas, beds or yoga mats. this kenko back neck stretcher is lightweight and portable. ideal neck and shoulder relaxer so that people can enjoy cervical stretcher more comfortably to ease work or travel neck fatigue. both pillowcase and pillow of hkml scoliosis pillow is machine washable, to liberate your hands! please keep in mind our neck cracker cant be used as an ordinary pillow all night long. do not use it more than 20 minutes or all night. normally you will need 1-3 days to adapt to this neck neck stretcher for pain relief because it needs time to fit your neck contour.
Specifications:
| Item traits | 8.66 x 1.97 x 7.17 inches; 9.52 Ounces |
| Product Dimensions | 8.66 x 1.97 x 7.17 inches; 9.52 Ounces |
| Country of Origin | China |
| Sport | Neck Pain |
18. Outback Designs Guitar Neck Shims – Durable Bolt-On Neck Plate For Guitar And Bass Repair – Protective Guitar Neck Gasket Made From Flexible Nylon –
Product Details:
Heavy-duty nylon guitar shim – our bolt-on neck shims for guitars have been expertly crafted using high-end flexible nylon plastic. neck protection with no air pocket – these guitar plate shims have been carefully angled and molded in order to provide the exact angle of tilting you need with absolutely no air pocket, protecting your guitar's neck and base from wear and damage. perfect for guitar repair – whether you're installing a new sized bridge or simply repairing the neck, our guitar neck shims are designed to fit onto most electric guitars and basses. these are also available in the sizes 0.25°, 0.5°, and 1°. these guitar neck gaskets are also a great gift idea for any guitar player. no questions asked!
Specifications:
| Product Dimensions | 6 x 4 x 1 inches |
| Color Name | Black |
19. Music Nomad Mn612 Truss Rod Neck Relief Measure And Adjust Kit For Martin Guitars
Product Details:
Music nomad truss rod neck relief measure and adjust kit for martin guitars standard – the musicnomad truss rod neck relief measure and adjust kit for martin guitars simplifies the process of measuring adjusting your guitar’s neck relief, improving playability sound. comes equipped with 3 most common relief measurements electric, acoustic, classical bass (. 006”, . 008” . 010”). when you are ready to adjust, 5 mm premium truss rod wrench is made custom fit all models guitar nut that adjust inside soundhole, except dss-2018, omss-2019, modern deluxe series sc-13e. ergonomic handle rubber protective bumper gives comfort security while working around prized instrument. gauge can also be used on any other or bass, compatible brands use size. includes precision gauge, pick capo wrenchprecision stainless steel includes three (. 006", . 008" . 010")gauge easy-to-follow instructions a assistworks models, sc-13epremium designed durable construction extra control accessories, tools, fretted instrument tools, guitar tools & toolkits
20. Trigger Point Pillow – Head And Neck Pain Relief Traction Device- Acupressure Support Relaxer For Tension Headache Relief, Improved Decompression
Product Details:
Pain relief — if suffering from chronic neck pain, herniated disks, upper body stiffness, neck pain, migraines, or arthritis symptoms, use the trigger point pillow to relieve neck and shoulder pain while providing a cervical neck traction. no pain, no gain – the trigger point pillow is intentionally designed to put pressure onto meridian points in your upper shoulders neck and head to relieve stress. the “pillow” may not feel relaxing but it is working to release pressure at key meridian points. release stress – lay in place for 3 minutes stretching the neck and moving the head side to side for some added physical therapy. for continued results lay in device for 4-5 minutes. feel the difference with relaxing post treatment results. effective comfort – help sooth office fatigue, driver fatigue, back pain, neck pain, insomnia and headaches, through gentle but firm meridian point pressure. portable – compact, light, and easy to travel with.
Specifications:
| Product Weight (lbs) | 1 |
| Length (cm) | 15 |
| Weight Range | 13.1 ounces |
