Are you looking for the Neck Shims For Guitar? If so, you’ve come to the right place.
Choosing the Neck Shims For Guitar can be difficult as there are so many considerations, such as DiMarzio, Seymour Duncan, Charvel, Fishman, Fender, Stewart-MacDonald, VOX. We have done a lot of research to find the top 20 Neck Shims For Guitar available.
The average cost is $27.51. Sold comparable range in price from a low of $4.78 to a high of $119.99.
Based on the research we did, we think Outback Designs Guitar Neck Shims – Durable Bolt-On Neck Plate for Guitar and Bass Repair – Protective Guitar Neck Gasket Made from Flexible Nylon – is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Neck Shims For Guitar (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
Features:
- Tools by outback designs. details:outback designs nylon guitar neck shims.
- Introducing ★outback designs’ protective bolt-on guitar plate★.
- This nylon material provides improved durability and effectiveness over standard wooden guitar neck…
$18.49
4.6
Features:
- Neck shim set for floyd rose style locking nuts.
- Fits between locking nut and neck.
- Includes 2 pieces of each thickness: .1 mm, .2 mm, .3 mm.
$38.77
Features:
- 0.25-degree shim offers the most versatility – stacking them will let you really dial in the neck angle you're after.
- 0.5-degree taper is the one you'll reach for most often – it works great on fender and many other solidbody guitars.
- 1-degree taper for guitars with a tune-o-matic bridge or floyd rose.
Features:
- Designed with 5 different heights and angles to cradle most string instruments
- Softgel material offers a cushioned support for the instruments
- This 5-in-1 cradle cube allows versatile usage
Features:
- Most recognized shim in the diy market
- Clean product
- Consistent quality
$18.21
Features:
- Neck shim 1.00 degree shaped for electric bolt-on neck guitar to change the angle of a bolt-on neck, players and repair shops have used shims for years. all kinds of…
$36.27
Features:
- To change the angle of a bolt-on neck, players and repair shops have used shims for years. those kinds of shims create an unwanted gap under the heel of the…
$63.85
Features:
- Tapered maple shims used to change the angle of a bolt-on neck. to change the angle of a bolt-on neck, players and repair shops have used shims for years. those…
$8.75
Features:
- Real wood neck shims, these are our thicker shim at about 1/16" to 1/8" thick, these are straight non-angled shims. we've seen cardboard, plastic, even cut up credit cards used…
$13.99
Features:
- Tapered maple shims used to change the angle of a bolt-on neck. to change the angle of a bolt-on neck, players and repair shops have used shims for years. we've…
$14.50
Features:
- Ten wood shims, five thin, five thick. real wood neck shims. we've seen cardboard, plastic, even cut up credit cards used as neck shims on beautiful vintage guitars! stop using…
$10.00
Features:
- 3d printed neck shims in 2 and 1.5 degree. full coverage and works great! fits standard fender neck pocket perfectly! save yourself the trouble of trying to make one or…
$15.00
Features:
- Required to lower the action on lx, elites and other ovations with pointed fretboard end.076 thick genuine honduras mahogany neck shimeasy installation and fitting may require some slight fitting to…
Features:
- Use a fret rocker to identify high fretsstep 2.
- Adjust the neck to a flat position, then sand or file the offending frets level.step 3.
- Recrown and polish your frets.
Features:
- Broadfix 1.13 in. w x 4 in.
- These shims are widely used in the glazing and wall covering industries due to their high compressive strength and easy stacking.
- For use indoors and outdoors will never warp or swell.
Features:
- Use a fret rocker to identify high frets br br step 2 /b.
- Adjust the neck to a flat position, then sand or file the offending frets level. br br step 3 /b.
- Recrown and polish your frets.
$35.99
Features:
- Make sure this fits by entering your model number.
- Made of solid metal to match the guitar neck.
- Keep these on hand for a quick turnaround on this common repair.
$14.50
Features:
- High quality material：guitar neck shims are made of high quality solid brass material for durable use to match the guitar neck.
- Widely used: the guitar neck shims are designed to fit onto most electric guitars and basses. protect your favourite guitar from corrosion or damage.
$19.99$14.99
Features:
- Original 1960's fender neck shim to help get your guitar set up how you like….
Features:
- Practical guitar repair neck support- a necessary asset for any music lovers who do their own maintenance, cleaning , whether you are changing strings on an acoustic or electirc guitars,…
1. Outback Designs Guitar Neck Shims – Durable Bolt-On Neck Plate For Guitar And Bass Repair – Protective Guitar Neck Gasket Made From Flexible Nylon –
Product Details:
Heavy-duty nylon guitar shim – our bolt-on neck shims for guitars have been expertly crafted using high-end flexible nylon plastic. neck protection with no air pocket – these guitar plate shims have been carefully angled and molded in order to provide the exact angle of tilting you need with absolutely no air pocket, protecting your guitar's neck and base from wear and damage. perfect for guitar repair – whether you're installing a new sized bridge or simply repairing the neck, our guitar neck shims are designed to fit onto most electric guitars and basses. these are also available in the sizes 0.25°, 0.5°, and 1°. these guitar neck gaskets are also a great gift idea for any guitar player. no questions asked!
Specifications:
| Product Dimensions | 6 x 4 x 1 inches |
| Color Name | Black |
2. Allparts Floyd Rose Shim
Product Details:
Specifications:
| Made In | Germany |
Reviews:
Helped out big time for neck cut out to low for locking nut on my new guitar build!!!!!!amcd326
This item is not available on the All Parts guitar parts website without placing a minimum $40 order.sevste2
3. Stewmac Neck Shims For Guitar, Blank, Set Of 3
Product Details:
Full contact, precisely tapered to change the angle of a bolt-on neck, players and repair shops have used shims for years. those kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. as dan erlewine describes in his guitar player repair guide: "this gap may cause an upward kink in the neck. and many players feel they lose tone unless firm contact is maintained between the neck and the body." dan creates tapered shims that cover the entire heel of the neck. with these bolt-on shims, that work is done for you. attention repair shops: making a quality shim takes time. keep these on hand for a quick turnaround on this common repair. these blank shims are designed for odd screw spacings, smaller neck pockets, and custom designs like the fender micro-tilt. this set includes 3 hard maple shims, each at a different taper for changing the pitch of any bolt-on neck: 0.25-degree shim offers the most versatility stacking them will let you really dial in the neck angle you're after. 0.5-degree taper is the one you'll reach for most often it works great on fender and many other solidbody guitars. 1-degree taper for guitars with a tune-o-matic bridge or floyd rose. dimensions: 2-1/4 inch x 3 inch (57.15mm x 76.12mm) taper specs (approximate): 0.25-degree tapers from 0.030 inch to 0.019 inch (0.76mm to .048mm) 0.5-degree tapers from 0.028 inch to 0.008 inch (0.71mm to .020mm) 1-degree tapers from 0.060 inch to 0.010 inch (1.52mm to .025mm)
4. Music Nomad Mn206 Cradle Cube Neck Support
Product Details:
What every guitar builder needs. forget using a pillow or your lap to support your string instrument while you work. musicnomad has developed a better way to work on your string instrument. the 5-in-1 cradle cube neck support is made of an innovative soft gel material to gently yet fully support either side of the neck. with 5 varying heights and angles, it works great for all string instruments—acoustic guitars, electric guitars, ukuleles, violins, banjos, mandolins and more. safe on all instrument finishes, our cradle cube helps you change strings quicker and do repairs and maintenance in a secure and sturdy way.
Specifications:
| Material | Softgel |
| Design | Cube |
| Color | Blue |
| Dimensions | 4.15" L x 4.15" W x 5.25" H |
| Weight | 0.59lb |
Reviews:
5. Nelson Wood Shims 8" – 12 Pack
Product Details:
Nelson pine shims are handy for numerous household projects. whether you're a diy enthusiast or a hardworking remodeler, nelson shims provide you with the quality and consistency you need. uses include: leveling windows and cabinets, setting door jambs, leveling roof trusses, leveling appliances, stirring paint, spreading adhesives, craft projects, garden markers, and tree and sod stakes.
Specifications:
| Wood Species | Pine |
| Actual Length (Inches) | 7.875 |
| Actual Width (Inches) | 1.375 |
| Actual Thickness (Inches) | 0.3125 |
| Finish | Unfinished |
| For Use with Windows | Yes |
| For Use with Drywall | No |
| For Use with Carpet | No |
| For Use with Toilets | No |
| For Use with Tile | No |
| Package Quantity | 12 |
| For Use with Door Hinges | Yes |
| For Use with Doors | Yes |
Reviews:
right shape smaller than ones i used before
We had a storage cabinet that seemed tipsy. Two of these shims and it is all better.Bev
6. Stewmac Neck Shim 1.00 Degree Shaped For Electric Bolt-On Neck Guitar
Product Details:
Neck shim 1.00 degree shaped for electric bolt-on neck guitar to change the angle of a bolt-on neck, players and repair shops have used shims for years. all kinds of materials have been used, from matchbook covers to guitar picks stuck in neck joints. in the early days fender used shims for factory setup work as well, particularly for jm and jag models. at first a synthetic rubber strip was used, from the mid-sixties a material similar to thin cardboard / sandpaper appeared. these kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. as dan erlewine describes in his guitar player repair guide: this gap may cause an upward kink in the neck. and many players feel they lose tone unless firm contact is maintained between the neck and the body. stewmac created tapered shims that cover the entire heel of the neck. with these ready-made shims, that work is done for you. making a quality shim takes time! keep these on hand for a quick turnaroun
7. Stewmac Neck Shims For Guitar, Shaped, Set Of 3
Product Details:
To change the angle of a bolt-on neck, players and repair shops have used shims for years. those kinds of shims create an unwanted gap under the heel of the neck, dead airspace where humidity condenses to swell the wood. made of solid maple to match the guitar neck. better than the typical homemade "guitar pick" neck joint shims, these tapered shims cover. keep these on hand for a quick turnaround on this common repair. the set includes 3 hard maple shims in the following tapers, 0.25-degree taper, 0.5-degree taper, and 1-degree taper.
8. Stewmac Neck Shims For Guitar, Blank, 1 Degree – 6-Pack
Product Details:
Tapered maple shims used to change the angle of a bolt-on neck. to change the angle of a bolt-on neck, players and repair shops have used shims for years. those kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. as dan erlewine describes in his guitar player repair guide: "this gap may cause an upward kink in the neck. and many players feel they lose tone unless firm contact is maintained between the neck and the body." dan creates tapered shims that cover the entire heel of the neck. with these ready-made shims, that work is done for you. attention repair shops: making a quality shim takes time. keep these on hand for a quick turnaround on this common repair. these blank shims are designed for odd screw spacings, smaller neck pockets, and custom designs like the fender micro-tilt. they offer full contact and are precisely tapered. this set includes 6 (six) 1-degree hard maple shims. choose shims of this size taper for guitars with a tune-o-matic bridge or floyd rose. dimensions: 2-1/4 inch x 3 inch (57.15mm x 76.12mm) taper specs (approximate): 1-degree shims taper from 0.060 inch to 0.010 inch (1.52mm to .025mm)
9. 5) Thicker Wood Neck Shims For Guitar Neck Pocket 2 1/4" X 3 1/8"
Product Details:
Real wood neck shims, these are our thicker shim at about 1/16" to 1/8" thick, these are straight non-angled shims. we've seen cardboard, plastic, even cut up credit cards used as neck shims on beautiful vintage guitars! stop using garbage for neck shims. commercial neck shims are very expensive. we offer reasonably priced real wood neck shims. we have various assorted dark woods and light woods available. we also have thinner wafer shims at approximately 1/40" available. the auction is for 5 assorted wood neck shims. these shims are made from thin rosewood, walnut, mahogany, maple, spruce, or other assorted real woods. it is cut thin and perfect for neck shims. for each single auction purchase the buyer will receive 5 assorted wood neck shims. they are approx. 2 1/4" by 3 1/8" and about 1/16"-1/8" thick. they are intended for a electric guitar neck pockets. they are thin, rough cut (not square) and not perfect. they will need to be trimmed and or neck holes drilled to fit your project. if you need a thinner
10. Stewmac Universal .5 Degree Maple Neck Shim For Guitar Or Bass
Product Details:
Tapered maple shims used to change the angle of a bolt-on neck. to change the angle of a bolt-on neck, players and repair shops have used shims for years. we've seen everything from matchbook covers to guitar picks stuck in neck joints. those kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. full contact and precisely tapered: we have 3 different degrees for changing the pitch of any bolt-on neck. 0.25-degree shim offers the most versatility. stacking them will let you really dial in the neck angle you're after. 0.5-degree shim is the one you'll reach for most often. it works great on fender and many other solidbodies. 1-degree shim is great for guitars with a tune-o-matic bridge or floyd rose. taper specs (approximate)0.25-degree shim tapers from 0.030" to 0.019" (0.76mm to 0.48mm)0.5-degree shim tapers from 0.028" to 0.008" (0.71mm to 0.20mm)1-degree shim tapers from 0.060" to 0.010" (1.52mm to 0.25mm) dimensionsblank: 2-1/4" x 3" (57.15mm x 76.12mm) blank shims were designed for odd screw spacings, smaller neck pockets, and custom designs like the fender micro-tilt . made of hard maple to match the neck wood. this listing is for one (1) .5 degree blank neck shim.
11. 10) Thin & Thick Neck Shims For Electric Guitar Neck Pocket 2 1/4" X 3
Product Details:
Ten wood shims, five thin, five thick. real wood neck shims. we've seen cardboard, plastic, even cut up credit cards used as neck shims on beautiful vintage guitars! stop using garbage for neck shims. commercial neck shims are very expensive. we offer reasonably priced real wood neck shims. we have various assorted dark woods and light woods available. the auction is for 10 assorted wood neck shims, these are straight non-angled shims. these shims are made from assorted woods which can include, maple, mahogany, rosewood, koa, birch, spruce, cherry, etc. the thin shims are about 1/40-1/42" and the thick are about 1/16"-1/8". with this purchase the buyer will receive 10 assorted, 5 thick and 5 thin wood neck shims. they are approx. 2 1/4" by 3 1/8". they are intended for a electric guitar neck pockets. they are very thin, rough cut (not square) and not perfect. all thin shims layered together give a thickness of about 1/8". they will need to be trimmed and or neck holes drilled to fit your project. if you nee
12. 2 Fender Strat Or Tele Neck Shims
Product Details:
13. Ovation Lx Neck Shim
Product Details:
Required to lower the action on lx, elites and other ovations with pointed fretboard end.076 thick genuine honduras mahogany neck shimeasy installation and fitting may require some slight fitting to your particular ovationthe mahogany is very soft and can be easily shapedmint conditionsee other listings having different thicknesses
14. Skyscraper Guitars Notched Straight Edge For Fender Scale/gibson Scale – Guitar Neck Setup Tool
Product Details:
Stop buying inferior tools – ssg notched straight edges are made from 3/16" thick material. this tool will not bend and twist like most others on the market. quality materials – made of aircraft grade 6061 aluminum and bright orange anodized for a long life of service and a killer look two of the most popular scales – this tool has both fender and gibson scales ultra accurate measuring surface – these beams are hand lapped on a machinist's surface plate for deadly flat working surfaces made with pride – all skyscraper guitars tools are 100% made in the u.s.a.
Specifications:
| Product Dimensions | 18 x 1.5 x 0.5 inches |
| Is Discontinued By Manufacturer | No |
15. Broadfix Revolutionary Flat Shims (Set Of 3)
Product Details:
Broadfix 1.13 in. w x 4 in. for use indoors and outdoors will never warp or swell. width: 1.13 in. length: 4 in. broadfix 1.13 in. w x 4 in. these shims are widely used in the glazing and wall covering industries due to their high compressive strength and easy stacking. for use indoors and outdoors will never warp or swell.
Specifications:
| Package Dimensions | 10.39 x 7.48 x 4.06 inches |
| Shape | Rectangular |
16. Fret Leveling Kit – 16" F (25.5") / G (24.75") Scales
Product Details:
Sick of having to set your string action high to quiet your guitar's fret buzz? you're not alone… most guitars have frets that are a few 1/1000's an inch high when compared with their adjacent frets. you can make your guitar play better in a few quick steps: step 1 – use a fret rocker to identify high frets step 2 – adjust the neck to a flat position, then sand or file the offending frets level. step 3 – recrown and polish your frets. there is no better way to take care of steps 1 & 2 in this process than using a skyscraper guitars fret rocker, notched straight edge and precision sanding beam. our notched straight edges are made of 3/16" thick aircraft grade aluminum and feature beveled edges. our sanding beams are made with radiused tubing. the contact surface of each straight edge and sanding beam are hand lapped on a machinist's surface plate and they are brought up through abrasive grits until they are flat within .0005" per foot of length. this level of precision will ensure that your fret work is as precise as humanly possible. once our tools are lapped perfectly flat, they are hard anodized to ensure they will provide a lifetime of service to their owners.
Specifications:
| Product Dimensions | 18 x 1.5 x 2 inches |
| Is Discontinued By Manufacturer | No |
| Speaker Diameter | 3 inches |
17. Alnicov 4pcs Guitar Neck Shims 0.2mm 0.5mm 1mm Thickness Brass Shims For Electric Guitar Bass Luthier Tools(Chrome)
Product Details:
Made of solid metal to match the guitar neck keep these on hand for a quick turnaround on this common repair used to change the angle of a bolt-on guitar neck,giving your guitar a better sound quality the guitar shims set includes 3 thickness sizes brass shims: 0.2mm(2pcs),0.5mm and 1mm,necessary luthier tools for electric guitar bass players the guitar neck shims are very easy to operate and install description: 1. made of brass material,designed for long time use and durable 2. guitar shims set,with 3 thickness sizes 3. standard material,accurate size for giving your guitar better sound quality 4. easy to carry, economical and durable 5. compact and lightweight,easy to install,can be replaced specifications: product name:guitar neck shim color:chrome material:brass thickness: 0.2mm,0.5mm,1mm item weight:6g package included: 2pcs x 0.2mm shims 1pcs x 0.5mm shims 1pcs x 1.0mm shims
Specifications:
| dimensions | 9 x 7 x 0.02 cm; 10 Grams |
18. 8pcs Saphue Guitar Neck Shims 4pcs 0.2mm, 2pcs 0.5mm And 2pcs 1mm Thickness Brass Shims For Guitar And Bass Bolt-On Neck Repair(Gold)
Product Details:
High quality material:guitar neck shims are made of high quality solid brass material for durable use to match the guitar neck. functions:these shims worked well to elevate and angle the neck in order to give more adjustability to the bridge and to help make the setup more in line with your playing preferences. size: the guitar shims set includes 3 thickness sizes brass shims: 0.2mm(4pcs), 0.5mm(2pcs) and 1mm(2pcs), necessary luthier tools for electric guitar bass players. widely used: the guitar neck shims are designed to fit onto most electric guitars and basses. protect your favourite guitar from corrosion or damage. saphue guitar neck shims are great tools to change the angle of a bolt-on guitar neck for giving your guitar better sound quality. features: set includes 8 shims in the following tapers: 0.2mm, 0.5mm,1mm thickness used to change the angle of a bolt-on guitar neck keep these on hand for a quick turnaround on this common repair specification: color: gold. material: brass. size: 42×3.7×0.7cm/16.5×1.5×0.3inch. package includeds:(8 hard shims ) packing includes: 4pcs x 0.2mm shims 2pcs x 0.5mm shims 2pcs x 1.0mm shims
Specifications:
| Package Dimensions | 4.69 x 2.88 x 0.16 inches |
| Color Name | Gold |
19. Fender Neck Shim Black 1964
Product Details:
20. Craymin Guitar Neck Rest Support Guitar Maintenance Neck Support For String Change, Fret Leveling, Nut Adjustment Of String Instruments Guitars,
Product Details:
Practical guitar repair neck support- a necessary asset for any music lovers who do their own maintenance, cleaning , whether you are changing strings on an acoustic or electirc guitars, adjusting pickup heights, swapping electronics, fret leveling, nut adjustment or whatever, you need this. universal guitar neck support cradle –two variable angles and heights can be used for bass, accoustic guitars, electric guitars, ukuleles, violins, violas, cellos, banjos, and any other string instruments great gift for music lovers- no matter whatever birthday, father/mother’s day, christmas, wedding anniversary… a good choice it is. it allows you to keep your musical instruments from having to hold the neck, moving or banging into where you works on them. keep it away from scratches- made from soft and solid cork, more tolerant of handling, dropping, and typical hammering on the guitar or other instruments neck, lightweight and supportive, it won't scratch any neck surface or leave any markings on guitars. pretty stable as bass guitar neck support -well crafted and does good job of solidly holding the guitar, ukulele, violin…necks, simple and easy to use. nice smaller size, so it stows in your tool bin easily. p craymin guitar neck rest-good stabilizing neck rest /b – br – multiple musicalinstruments can fit snugly on this neck rest – great guitarmaintenance neck support for changing strings,fret leveling, nut adjustment, set-ups,cleaning & repairs. – stable and it has two heights to support different instruments styles. – lightweight and nice smaller size allow it to be in portable. – features:- /b – simple guitar repair neck support and easy to use – to make maintenance, cleaning, repair mucheasier – portable size for easy convenience andstorage – made of cork, will not damage the guitar neck – suitable for most strings instruments with neck, guitars, basses, ukulele, mandolin, banjo and many more. – two height design can suit different instruments. – in package: /b – 1 x guitar neck rest /p
Specifications:
| Product Dimensions | 4.65 x 4 x 3.45 inches |
