Thin U Guitar Neck For Sale (2024 Update)

Recently was installed an american special that the neck's frets had been worn down. this neck is a 2020 with minimal fret wear (does have a little, but i would say retains 90 percent of original life). does include tuners.

Beautiful birdseye maple neck with a rosewood fretboard. comes with locking tuners

Necks by fender. details: there’s no denying the allure of a roasted maple neck. resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument’s voice. this roasted maple modified esquire neck has the back shape of an early 50’s esquire but with a flatter fingerboard radius and larger frets for modern playability. this ensenada, mexico-made esquire neck features a maple fingerboard, a 9.5” radius and 22 narrow tall frets. the one-piece roasted maple neck has a thick early 50’s “u” profile with a smooth satin urethane finish on the front and back of the neck. the headstock has a gloss finish with an authentic “esquire” decal to complete the classic look. the bone nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing. for true fender authenticity, it's also serialized and stamped, with genuine headstock logo decal. other installation processes may…

Guitar neck blackstrange shape guitar neck, all black paint abnormity 24 product bidirectional

S-style guitar neck

Features: 1. designed for lp electric guitar neck replacement with a natural finish and white trapezoid inlay. 2. well-constructed guitar neck nut and horizontal fret level bring you comfortable playing experience and prevent the strings from buzzing. 3. set in style, white fretboard binding. 24.75 inch 22 fret. 2.7mm fret wire, heel width about 3.8cm, heel length: 10.7cm, depth: 2.5cm. 4. two-way adjustable truss rod helps stabilize the performance of your guitar neck that is susceptible to humidity and tension from guitar strings. 5.truss rod at headstock, nice cut headstock , normal nut, 42mm nut width. package includes: 1 x neck specifications: material: wood color: as the picture shows weight: approx.680g neck body: mahogany fingerboard: rosewood position marker: trapezoid note: please allow 0-3mm error due to manual measurement. pls make sure you do not mind before you bid. due to the difference between different monitors, the picture may not reflect the actual color of the item. thank you! gender: male.

Features: 1. designed for lp electric guitar neck replacement with a natural finish and white trapezoid inlay. 2. well-constructed guitar neck nut and horizontal fret level bring you comfortable playing experience and prevent the strings from buzzing. 3. the beveled fret ends and rolled edges of the guitar neck give you a nice smooth touch. 4. two-way adjustable truss rod helps stabilize the performance of your guitar neck that is susceptible to humidity and tension from guitar strings. 5.truss rod at headstock, nice cut headstock , normal nut, 42mm nut width. package includes: 1 x neck specifications: material: wood color: as the picture shows weight: approx.580g neck body: mahogany fingerboard: rosewood position marker: trapezoid side dots: black fret: cupronickel nut: abs net weight: 550g neck length: 625mm tuner hole: 10mm width at nut: 42mm scale length: 628 mm / 24.72 inch with at heel: 57mm( 0.5 mm deviation) truss rod: two-way adjustable, 4mm allen wrench note: please allow 0-3mm error due to manual measurement. pls make sure you do not mind before you bid. due to the difference between different monitors, the picture may not reflect the actual color of the item. thank you! gender: male.

Store home |sporting goods |bicycle components & parts |water sports |club |others 40 '' acoustic guitar neck neck for luthier diy description: 40'' acoustic guitar neck luthier diy replacement parts. made of high grade , smooth and exquisite craftsmanship. perfect guitar neck for diy your own guitar. a great replacement for your old guitar neck. size chart:bottom width: approx. 5.7cm/2.24inch length: approx. 54cm/21.26inch hole diameter: approx. 8.2mm/0.32inch package includes: 1 piece guitar neck payment shipping returns we only accept paypal payment. if you are bidding or ordering more than one item, the items will be combined into one order automatically thus you can pay altogether. if you want not to combine, please buy one and immediately pay one separately. please pay what you win in 7 days. unpaid dispute will be automatically open if payment is not received after 7 days. if you pay the bill after received unpaid dispute, please email us to close the unpaid dispute. because the unpaid dispute will not

Description suitable for diy electric guitars amateur neck wood: mahogany fretboard wood: rose wood finish: unfinished inlay: dot inlaid side dots: left side dots scale length: 25.5 inch . if you need other scale length please contact me. frets: 24nickel/silver frets truss rod adjust: at headstock or bottom payment we appreciate quick payment and look forward to helping you with your musical instrument needs in the future. payment method: accept the following forms of payment via our secure system: paypal (visa, master, american express, discover, debit, and bank transfer) credit / west union credit / west union: please contact us if you like the in this way to pay. we recommend you by the paypal. checkout: after winning an item in an auction or a "buy it now" purchase, click on the checkout now button to immediately proceed with the checkout and payment process. you will be directed to our third party checkout system. delivery details return for refund: if you are not c

Delicate guitar neck parts bright surface comfortable fretboard guitar neck for maintain guitar

I bought this guitar for a project and decided not to do it. looks to be in perfect shape, frets have a lot of life trust rod works. 10 – 16 radius, frets look barley played the warmuth logo can be easily removed and replaced with your own logo or a fender water slide

The original aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. it is designed to be an aftermarket fit with most stratocasters, telecasters, and jazzmasters. it comes with everything you need to replace your current neck with one from rgi. this neck is built and ready to ship! neck specs: material: 6061 solid billet aluminum scale: 25.5” nut width: 1 11/16” frets: 22 stainless steel medium/medium fretboard radius: 12” tuners: 3+3 sperzel locking nut: 6061 aluminum (cut for heavy gauge strings)(0.013", 0.020", 0.024", 0.035", 0.046", and 0.056") heel pocket: fender strat style (5/8” deep, 2.18” heel width, 3” total length, 5” radius heel curve) thickness: .700” at nut, .725” at 7th fret, .740” at 12th fret .760” at 15th fret neck shape: very flat u shape, maximum thinness without structural loss, no tapered heel includes: 4 stainless steel 1 1/2 “ 10-24 mounting bolts, backplate, buffing compound, and 2 microfibre cloths frequently asked questions why aluminum? when looking for a neck, there are a lot of different variables to look at. structurally, a solid billet of aluminum will offer the most rigidity of the option possible. there is no truss rod or other materials to stress and strain during temperature or moisture changes. additionally, that additional strength can help with the wear and tear of tour, stages, and other bumps and bruises any guitar will have to sustain during it’s lifespan. sonically, the density of aluminum may give you an advantage with more sustain and over tones, since the neck won’t sympathetically vibrate with the strings. this is, as with anything, certainly up for debate as to what your ears hear and your hands feel. it’s worth noting that it will feel colder to the touch since aluminum is a better thermal conductor than wood, and it does noticeably weigh more. will this fit my guitar? yes: for the most part, if you’re running a telecaster, stratocaster, or jazzmaster, you should be able to bolt this neck directly onto the body. maybe not: if you are running a t-60, jaguar, mustang, or 72’ telecaster deluxe; you cannot run this neck without modifications due to scale and bolt pattern restrictions. if you are confused and unsure, contact a local luthier to help you with your project. it’s a worthy profession to support and you’ll learn new things. if you are considering a guitar not mentioned here, then i’m not sure. can i do the change over myself? yes: most seasoned guitarist can probably do this, yes. but read this: i have pre-drilled the necks and they are tapped with machine bolts. you may have to adjust neck angle, saddle heights, and intonate your guitar afterwords. if your action is still too loose for your preference, a luthier can help you with adjusting the nut string depths to a tighter playing style. the depths are set fairly high to allow for adjustment after installation. what is the 700 series? the 700 series is the first set of necks that i designed, named after the thickness at the nut for the design. i will be continuing this convention for each style going forward, so anything with this thickness will be in the 700 series, and further designs may be in a new series for their specific design requirements. can i get something custom? short answer, yes: i can make a neck for any project. in the recent past i’ve also made custom guitars, hand-wired tube amps, cabs, a few different pedals and even a pickup. custom, multiple runs: if you are a guitar builder and are interested in ordering a batch of necks custom fit and finished for your company or brand, please reach out. i can offer discounts for custom work at scale. fully custom, one-off builds: if you have your sights set on something fully custom, i’d be glad to chat with you about your needs. this process is expensive. the new neck would need to be prototyped, engineered, manufactured, and then finished, all with processes and measurements outside of my normal set-up. you’d be looking at at least a handful of months and a starting price around $5,000. can i get mine cheaper? faster? no affirm asked me to add this, if you use affirm please read this or something like that if you finance with affirm and if one or more items in your order has an extended ship date, your loan payment(s), including interest, may be due before the merchant ships all of the items. please note that you may not receive a rebate of any interest that may have already accrued on an amount that later gets refunded.

The original bolt on aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. it is designed to be an aftermarket fit with most stratocasters, telecasters, and jazzmasters. it comes with everything you need to replace your current neck with one from rgi. necks are built to order with your specifications, so expect up to a two month wait before receiving your neck. neck specs: material: 6061 solid billet aluminum scale: 25.5” nut width: 1 11/16” weight: solid billet: 3 lbs 3 oz, hollow richlite: 2 lbs 2 oz frets: 22 stainless steel medium/medium fretboard radius: 12” tuners: 3+3 sperzel locking nut: 6061 aluminum (cut for heavy gauge strings)(0.013", 0.020", 0.024", 0.035", 0.046", and 0.056") or cut to your specific gauges if specified heel pocket: fender strat style (5/8” deep, 2.18” heel width, 3” total length, 5” radius heel curve) thickness: .700” at nut, .725” at 7th fret, .740” at 12th fret .760” at 15th fret neck shape: very flat u shape, maximum thinness without structural loss, no tapered heel includes: 4 stainless steel 1 1/2 “ 10-24 mounting bolts, backplate, buffing compound, and 2 microfibre cloths frequently asked questions why aluminum? when looking for a neck, there are a lot of different variables to look at. structurally, a solid billet of aluminum will offer the most rigidity of the option possible. there is no truss rod or other materials to stress and strain during temperature or moisture changes. additionally, that additional strength can help with the wear and tear of tour, stages, and other bumps and bruises any guitar will have to sustain during it’s lifespan. sonically, the density of aluminum may give you an advantage with more sustain and over tones, since the neck won’t sympathetically vibrate with the strings. this is, as with anything, certainly up for debate as to what your ears hear and your hands feel. it’s worth noting that it will feel colder to the touch since aluminum is a better thermal conductor than wood, and it does noticeably weigh more. will this fit my guitar? yes: for the most part, if you’re running a telecaster, stratocaster, or jazzmaster, you should be able to bolt this neck directly onto the body. maybe not: if you are running a t-60, jaguar, mustang, or 72’ telecaster deluxe; you cannot run this neck without modifications due to scale and bolt pattern restrictions. if you are confused and unsure, contact a local luthier to help you with your project. it’s a worthy profession to support and you’ll learn new things. if you are considering a guitar not mentioned here, then i’m not sure. can i do the change over myself? yes: most seasoned guitarist can probably do this, yes. but read this: i have pre-drilled the necks and they are tapped with machine bolts. you may have to adjust neck angle, saddle heights, and intonate your guitar afterwords. if your action is still too loose for your preference, a luthier can help you with adjusting the nut string depths to a tighter playing style. the depths are set fairly high to allow for adjustment after installation. what is the 700 series? the 700 series is the first set of necks that i designed, named after the thickness at the nut for the design. i will be continuing this convention for each style going forward, so anything with this thickness will be in the 700 series, and further designs may be in a new series for their specific design requirements. can i get something custom? short answer, yes: i can make a neck for any project. in the recent past i’ve also made custom guitars, hand-wired tube amps, cabs, a few different pedals and even a pickup. custom, multiple runs: if you are a guitar builder and are interested in ordering a batch of necks custom fit and finished for your company or brand, please reach out. i can offer discounts for custom work at scale. fully custom, one-off builds: if you have your sights set on something fully custom, i’d be glad to chat with you about your needs. this process is expensive. the new neck would need to be prototyped, engineered, manufactured, and then finished, all with processes and measurements outside of my normal set-up. you’d be looking at at least a handful of months and a starting price around $5,000. can i get mine cheaper? faster? no affirm asked me to add this, if you use affirm please read this or something like that if you finance with affirm and if one or more items in your order has an extended ship date, your loan payment(s), including interest, may be due before the

Alibaba.com is an one-stop b2b global sourcing platform.canadian maple: tiger grain fingerboard, suitable for all kinds of music.american maple tiger: grain, suitable for all kinds of guitar types.vintage canadian: tiger grain pickle, perfect for your home.canadian maple tiger grain: sand-proof, corrosion-resistant, sturdy and durable, not easy to deform.nylon canadian maple: tiger grain fingerboard, polished metal strings.;stringed instruments parts & accessories

East city guitar co. is offering cnc f-style necks, which can be customized to customer specifications.

This solo guitar neck is intended as a replacement or diy project. neck specifications may have a +/- 1 or 2mm variance. if using this neck with a non solo body / solo hardware, slight modifications may be necessary in order to achieve a proper fit. specifications maple neck rosewood fretboard 12′′ fretboard radius 21 frets 25.5′′ scale length thickness at 12th fret: 15/16′′ width at 12th fret: 2 1/16′′ thickness at nut: 13/16′′ width at nut: 1 5/8′′ item shown: solo st style 21 fret guitar neck with rosewood fretboard model #: sl-stnrw21p-u upc: 0787392886725

Electric guitar neck maple wood diy replacements guitar neck for electric guitar drop shipping

Nice neck it does not have string tree holes or backplate holes. we are assuming this was for a project that never got completed. it has a fender shape but also has a couple scars on it please look at the pictures.

Guitar neck spaces

Banana shape electric guitar neck 1 piece