Are you looking for the Taylor Guitar Neck Shims? If so, you’ve come to the right place.
Choosing the Taylor Guitar Neck Shims can be difficult as there are so many considerations, such as Taylor, WD Music, Charvel, Schaller, Stewart-MacDonald, Gotoh. We have done a lot of research to find the top 20 Taylor Guitar Neck Shims available.
The average cost is $27.48. Sold comparable range in price from a low of $7.85 to a high of $146.14.
Based on the research we did, we think Outback Designs Guitar Neck Shims – Durable Bolt-On Neck Plate for Guitar and Bass Repair – Protective Guitar Neck Gasket Made from Flexible Nylon – is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Taylor Guitar Neck Shims (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
Features:
- Tools by outback designs. details:outback designs nylon guitar neck shims.
- Introducing ★outback designs’ protective bolt-on guitar plate★.
- This nylon material provides improved durability and effectiveness over standard wooden guitar neck…
$12.75
Features:
- Real wood neck shims. we've seen cardboard, plastic, even cut up credit cards used as neck shims on beautiful vintage guitars! stop using garbage for neck shims. commercial neck shims…
$8.75
Features:
- Size: 2 1/4" x 3 1/8" – five shims the auction is for 5 thin rosewood neck shims, these are straight non-angled shims. for each single auction purchase the buyer…
$12.69
Features:
- About the product 1. high quality materialguitar neck shims are made of high quality solid brass material for durable use to match the guitar neck. 2. functionsthese shims worked well…
$12.99
Features:
- Color: golden.
- Material: metal.
- Size: 5x1x0.1cm/ 1.96×0.39×0.03inch.
$38.77
Features:
- 0.25-degree shim offers the most versatility – stacking them will let you really dial in the neck angle you're after.
- 0.5-degree taper is the one you'll reach for most often – it works great on fender and many other solidbody guitars.
- 1-degree taper for guitars with a tune-o-matic bridge or floyd rose.
$19.99$14.99
Features:
- Original 1960's fender neck shim to help get your guitar set up how you like….
$146.14
Features:
- Full contact, precisely tapered – to change the angle of a bolt-on neck, players and repair shops have used shims for years. as dan erlewine describes in his guitar player…
$8.75
Features:
- Real wood neck shims, these are our thicker shim at about 1/16" to 1/8" thick, these are straight non-angled shims. we've seen cardboard, plastic, even cut up credit cards used…
$13.99
Features:
- Tapered maple shims used to change the angle of a bolt-on neck. to change the angle of a bolt-on neck, players and repair shops have used shims for years. we've…
$8.75
Features:
- Real wood neck shims. we've seen cardboard, plastic, even cut up credit cards used as neck shims on beautiful vintage guitars! stop using garbage for neck shims. commercial neck shims…
$10.00
Features:
- 3d printed neck shims in 2 and 1.5 degree. full coverage and works great! fits standard fender neck pocket perfectly! save yourself the trouble of trying to make one or…
$36.27
Features:
- To change the angle of a bolt-on neck, players and repair shops have used shims for years. those kinds of shims create an unwanted gap under the heel of the…
Features:
- Broadfix 1.13 in. w x 4 in.
- These shims are widely used in the glazing and wall covering industries due to their high compressive strength and easy stacking.
- For use indoors and outdoors will never warp or swell.
$15.63
Features:
- Material: the guitar neck gasket is made of high-quality solid brass material, which is strong and durable, and matches the guitar neck.
- Dimensions: brass spacers of 3 thickness sizes: 0.2 mm x 2, 0.5 mm x 1, 1 mm x 1, it is a must-have tool for electric guitar bass players.
- Essentials: this is a must-have for people who often play the guitar and need parts for quick and easy repairs.
$14.50
Features:
- High quality material：guitar neck shims are made of high quality solid brass material for durable use to match the guitar neck.
- Widely used: the guitar neck shims are designed to fit onto most electric guitars and basses. protect your favourite guitar from corrosion or damage.
$7.85
Features:
- Material: copper.
- Size: 5.00×1.00×0.20cm/1.97×0.39×0.08 inch.
- It is made of material for long time and durable use. compact and lightweight, easy to install.
$35.99
Features:
- Make sure this fits by entering your model number.
- Made of solid metal to match the guitar neck.
- Keep these on hand for a quick turnaround on this common repair.
$43.67
Features:
- Full contact, precisely tapered to change the angle of a bolt-on neck, players and repair shops have used shims for years. those kinds of shims create an unwanted gap under…
$64.95
Features:
- To see them clearer click on the big photo:hard to find. these are actual fender factory black shims . they came off of late '50's and early fenders. they could…
1. Outback Designs Guitar Neck Shims – Durable Bolt-On Neck Plate For Guitar And Bass Repair – Protective Guitar Neck Gasket Made From Flexible Nylon –
Product Details:
Heavy-duty nylon guitar shim – our bolt-on neck shims for guitars have been expertly crafted using high-end flexible nylon plastic. neck protection with no air pocket – these guitar plate shims have been carefully angled and molded in order to provide the exact angle of tilting you need with absolutely no air pocket, protecting your guitar's neck and base from wear and damage. perfect for guitar repair – whether you're installing a new sized bridge or simply repairing the neck, our guitar neck shims are designed to fit onto most electric guitars and basses. these are also available in the sizes 0.25°, 0.5°, and 1°. these guitar neck gaskets are also a great gift idea for any guitar player. no questions asked!
Specifications:
| Product Dimensions | 6 x 4 x 1 inches |
| Color Name | Black |
2. 15) Real Wood Guitar Shim Assortment 5) Nut, 5) Saddle & 5) Neck
Product Details:
Real wood neck shims. we've seen cardboard, plastic, even cut up credit cards used as neck shims on beautiful vintage guitars! stop using garbage for neck shims. commercial neck shims are very expensive. we offer reasonably priced real wood neck shims. we have various assorted dark woods and light woods available. we use finely shaved real wood shims in our luthier shop and we chose to make them available for purchase in our store and online. guitar shim assortment approximate sizes: neck shim size: 2 1/4" x 3 1/8" nut shim size: 1/4" x 2" saddle shim size:.1/8"x 2 7/8" 1/4" is just for reference, some are 3/16, some maybe 5/16th. sizes, thickness, will vary slightly. the auction is for 5) wood neck shims, these are straight non-angled shims. 5) wood nut shims and 5) wood saddle shims. for each single auction purchase the buyer will receive a total of 15 shims. these are wafer thin real wood shims. we use rosewood, koa, sapele mahogany, spruce, maple and other real woods, depending on what we have available
3. 5) Rosewood Neck Shims For Electric Guitar Neck Pocket 2 1/4" X 3 1/8"
Product Details:
Size: 2 1/4" x 3 1/8" – five shims the auction is for 5 thin rosewood neck shims, these are straight non-angled shims. for each single auction purchase the buyer will receive 5 neck shims. these are wafer thin rosewood neck shims. they are approx. 2 1/4" by 3 1/8" and about 1/40" – 1/42" thick. they are intended for a electric guitar neck pockets. they are very thin, rough cut (not square) and not perfect. all five layered together give a thickness of about 1/8". they will need to be trimmed and neck holes drilled to fit your project. if you need a thicker shim, they can be glued together, layered, graduated, and or sanded for your needs. for example; if you cut one in half, glue that half to a full size shim, sand the middle edge, you now have a graduated shim to adjust neck angle. however, these are not "ready to go, drop in" as with other "commercial" wood neck shims, but they are much less expensive. we find them very useful for custom neck projects and repairs. a stock angled shim may not match the an
4. Jssh Instruments Neck Shims Luthier Musical Parts Replacement Set Thickness, Men's, Size: 42
Product Details:
About the product 1. high quality materialguitar neck shims are made of high quality solid brass material for durable use to match the guitar neck. 2. functionsthese shims worked well to elevate and angle the neck in order to give more adjustability to the bridge and to help make the setup more in line with your playing preferences. 3. size: the guitar shims set includes 3 thickness sizes brass shims: 0.2mm(4pcs), 0.5mm(2pcs) and 1mm(2pcs), necessary luthier tools for electric guitar bass players. 4. widely used: the guitar neck shims are designed to fit onto most electric guitars and basses. protect your favourite guitar from corrosion or damage. 5. satisfaction guarantee: we stand by our quality commitment and will guarantee you 100% satisfaction of the guitar neck shims. please do not hesitate to contact us if there is any question. we will do our best to solve the problem as soon as possible. description: color: gold. material: brass. size: 42×3.7×0.7cm/16.5×1.5×0.3inch. thickness: 0.2mm, 0.5mm, 1mm. packing includes: 4x 0.2mm shims 2 x 0.5mm shims 2x 1.0mm shims notes: 1.due to the difference between different monitors,the picture may not reflect the actual color of the item. we guarantee the style is the same as shown in the pictures. 2.due to the manual measurement and different measurement methods, please allow 1-3mm deviation. thanks! gender: male. age group: adult.
5. Guitar Brass Neck Shim Shims Tools Acessories Replacement Heightening Gasket Accessories Golden Gasket Parts, Size: 5x1cm
Product Details:
Description are you looking for a professional, yet affordable guitar neck shim? are you in search of a sturdy, trustworthy tool that can do multiple jobs at once? if yes, look no further! our professional guitar neck shim must meet you needs. it is one of the best choices for you. features –
Specifications:
| Assembled Product Dimensions (L x W x H) | 1.97 x 0.39 x 0.04 Inches |
6. Stewmac Neck Shims For Guitar, Blank, Set Of 3
Product Details:
Full contact, precisely tapered to change the angle of a bolt-on neck, players and repair shops have used shims for years. those kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. as dan erlewine describes in his guitar player repair guide: "this gap may cause an upward kink in the neck. and many players feel they lose tone unless firm contact is maintained between the neck and the body." dan creates tapered shims that cover the entire heel of the neck. with these bolt-on shims, that work is done for you. attention repair shops: making a quality shim takes time. keep these on hand for a quick turnaround on this common repair. these blank shims are designed for odd screw spacings, smaller neck pockets, and custom designs like the fender micro-tilt. this set includes 3 hard maple shims, each at a different taper for changing the pitch of any bolt-on neck: 0.25-degree shim offers the most versatility stacking them will let you really dial in the neck angle you're after. 0.5-degree taper is the one you'll reach for most often it works great on fender and many other solidbody guitars. 1-degree taper for guitars with a tune-o-matic bridge or floyd rose. dimensions: 2-1/4 inch x 3 inch (57.15mm x 76.12mm) taper specs (approximate): 0.25-degree tapers from 0.030 inch to 0.019 inch (0.76mm to .048mm) 0.5-degree tapers from 0.028 inch to 0.008 inch (0.71mm to .020mm) 1-degree tapers from 0.060 inch to 0.010 inch (1.52mm to .025mm)
7. Fender Neck Shim Black 1964
Product Details:
8. Stewmac Neck Shim Shop Set Of 12
Product Details:
Full contact, precisely tapered – to change the angle of a bolt-on neck, players and repair shops have used shims for years. as dan erlewine describes in his guitar player repair guide:"this gap may cause an upward kink in the neck. and many players feel they lose tone unless firm contact is maintained between the neck and the body." dan creates tapered shims that cover the entire heel of the neck. with these bolt-on shims, that work is done for you. – attention repair shops: making a quality shim takes time. keep these on hand for a quick turnaround on this common repair. – note: each trio of shims includes 3 different tapers for changing the pitch of any bolt-on neck: 0.25-degree, 0.5-degree, and 1-degree. – the shaped shims fit most neck pockets with a rounded heel. the blank shims are designed for odd screw spacings, smaller neck pockets, and custom designs like the fender micro-tilt. – guitar shim dimensions:shaped: 2-3/16 inch x 3 inch (55.56mm x 76.12mm)blank: 2-1/4 inch x 3 inch (57.15mm x 76.12mm)bass shim dimensions:shaped: 2-1/2 inch x 3-7/8 inch (63.50mm x 98.43mm)blank: 2-3/4 inch x 3-7/8 inch (69.86mm x 98.43mm)taper specs (approximate):0.25-degree tapers from 0.030 inch to 0.019 inch (0.76mm to .048mm)0.5-degree tapers from 0.028 inch to 0.008 inch (0.71mm to .020mm)1-degree tapers from 0.060 inch to 0.010 inch (1.52mm to .025mm)
9. 5) Thicker Wood Neck Shims For Guitar Neck Pocket 2 1/4" X 3 1/8"
Product Details:
Real wood neck shims, these are our thicker shim at about 1/16" to 1/8" thick, these are straight non-angled shims. we've seen cardboard, plastic, even cut up credit cards used as neck shims on beautiful vintage guitars! stop using garbage for neck shims. commercial neck shims are very expensive. we offer reasonably priced real wood neck shims. we have various assorted dark woods and light woods available. we also have thinner wafer shims at approximately 1/40" available. the auction is for 5 assorted wood neck shims. these shims are made from thin rosewood, walnut, mahogany, maple, spruce, or other assorted real woods. it is cut thin and perfect for neck shims. for each single auction purchase the buyer will receive 5 assorted wood neck shims. they are approx. 2 1/4" by 3 1/8" and about 1/16"-1/8" thick. they are intended for a electric guitar neck pockets. they are thin, rough cut (not square) and not perfect. they will need to be trimmed and or neck holes drilled to fit your project. if you need a thinner
10. Stewmac Universal .25 Degree Maple Neck Shim For Guitar Or Bass
Product Details:
Tapered maple shims used to change the angle of a bolt-on neck. to change the angle of a bolt-on neck, players and repair shops have used shims for years. we've seen everything from matchbook covers to guitar picks stuck in neck joints. those kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. full contact and precisely tapered: we have 3 different degrees for changing the pitch of any bolt-on neck. 0.25-degree shim offers the most versatility. stacking them will let you really dial in the neck angle you're after. 0.5-degree shim is the one you'll reach for most often. it works great on fender and many other solidbodies. 1-degree shim is great for guitars with a tune-o-matic bridge or floyd rose. taper specs (approximate)0.25-degree shim tapers from 0.030" to 0.019" (0.76mm to 0.48mm)0.5-degree shim tapers from 0.028" to 0.008" (0.71mm to 0.20mm)1-degree shim tapers from 0.060" to 0.010" (1.52mm to 0.25mm) dimensionsblank: 2-1/4" x 3" (57.15mm x 76.12mm) blank shims were designed for odd screw spacings, smaller neck pockets, and custom designs like the fender micro-tilt . made of hard maple to match the neck wood. this listing is for one (1) .25 degree blank neck shim.
11. 5) Mahogany Neck Shims For Electric Guitar Neck Pocket 2 1/4" X 3 1/8"
Product Details:
Real wood neck shims. we've seen cardboard, plastic, even cut up credit cards used as neck shims on beautiful vintage guitars! stop using garbage for neck shims. commercial neck shims are very expensive. we offer reasonably priced real wood neck shims. we have various assorted dark woods and light woods available. the auction is for 5 thin mahogany wood neck shims, these are straight non-angled shims.they are cut exceptionally thin and perfect for neck shims. for each single auction purchase the buyer will receive 5 wood neck shims. they are approx. 2 1/4" by 3 1/8" and about 1/40" – 1/42" thick. they are intended for a electric guitar neck pockets. they are very thin, rough cut (not square) and not perfect. all five layered together give a thickness of about 1/8". they will need to be trimmed and or neck holes drilled to fit your project. if you need a thicker shim, they can be glued together, layered, graduated, and or sanded for your needs. for example; if you cut one in half, glue that half to a full siz
12. 2 Fender Strat Or Tele Neck Shims
Product Details:
13. Stewmac Neck Shims For Guitar, Shaped, Set Of 3
Product Details:
To change the angle of a bolt-on neck, players and repair shops have used shims for years. those kinds of shims create an unwanted gap under the heel of the neck, dead airspace where humidity condenses to swell the wood. made of solid maple to match the guitar neck. better than the typical homemade "guitar pick" neck joint shims, these tapered shims cover. keep these on hand for a quick turnaround on this common repair. the set includes 3 hard maple shims in the following tapers, 0.25-degree taper, 0.5-degree taper, and 1-degree taper.
14. Broadfix Revolutionary Flat Shims (Set Of 3)
Product Details:
Broadfix 1.13 in. w x 4 in. for use indoors and outdoors will never warp or swell. width: 1.13 in. length: 4 in. broadfix 1.13 in. w x 4 in. these shims are widely used in the glazing and wall covering industries due to their high compressive strength and easy stacking. for use indoors and outdoors will never warp or swell.
Specifications:
| Package Dimensions | 10.39 x 7.48 x 4.06 inches |
| Shape | Rectangular |
15. Zyamy 4pcs Guitar Neck Shims, Includes 2pcs 0.2mm, 1pc 0.5mm And 1pc 1mm Thickness Brass Shims Musical Bass Instrument Accessories
Product Details:
Material: the guitar neck gasket is made of high-quality solid brass material, which is strong and durable, and matches the guitar neck. dimensions: brass spacers of 3 thickness sizes: 0.2 mm x 2, 0.5 mm x 1, 1 mm x 1, it is a must-have tool for electric guitar bass players. application: the design of the guitar neck gasket is suitable for most electric guitars and basses. protect your favorite guitar from corrosion or damage. function: these spacers can lift and tilt the neck well to provide more adjustability for the bridge and help make the settings more in line with your playing preferences. essentials: this is a must-have for people who often play the guitar and need parts for quick and easy repairs. specification: br material: brass br thickness: 0.2mm, 0.5mm, 1.0mm br br feature: br used to change the angle at which the bolt fixes the guitar neck br carry these gaskets with you for quick turnaround during this common repair br br package contains: (4 hard gaskets) br 0.2mm * 2 br 0.5mm * 1 br 1.0mm * 1
Specifications:
| Package Dimensions | 3.54 x 2.36 x 0.12 inches |
16. 8pcs Saphue Guitar Neck Shims 4pcs 0.2mm, 2pcs 0.5mm And 2pcs 1mm Thickness Brass Shims For Guitar And Bass Bolt-On Neck Repair(Gold)
Product Details:
High quality material:guitar neck shims are made of high quality solid brass material for durable use to match the guitar neck. functions:these shims worked well to elevate and angle the neck in order to give more adjustability to the bridge and to help make the setup more in line with your playing preferences. size: the guitar shims set includes 3 thickness sizes brass shims: 0.2mm(4pcs), 0.5mm(2pcs) and 1mm(2pcs), necessary luthier tools for electric guitar bass players. widely used: the guitar neck shims are designed to fit onto most electric guitars and basses. protect your favourite guitar from corrosion or damage. saphue guitar neck shims are great tools to change the angle of a bolt-on guitar neck for giving your guitar better sound quality. features: set includes 8 shims in the following tapers: 0.2mm, 0.5mm,1mm thickness used to change the angle of a bolt-on guitar neck keep these on hand for a quick turnaround on this common repair specification: color: gold. material: brass. size: 42×3.7×0.7cm/16.5×1.5×0.3inch. package includeds:(8 hard shims ) packing includes: 4pcs x 0.2mm shims 2pcs x 0.5mm shims 2pcs x 1.0mm shims
Specifications:
| Package Dimensions | 4.69 x 2.88 x 0.16 inches |
| Color Name | Gold |
17. Nuolux Neck Guitar Shim Shims Gasket Spacer Replacement Luthier Tools Bass Electric Brass Part Accessories Strat Pocket Nut, Size: 5x1cm
Product Details:
Description are you looking for a professional, yet affordable guitar neck shim? are you in search of a sturdy, trustworthy tool that can do multiple jobs at once? if yes, look no further! our professional guitar neck shim must meet you needs. it is one of the best choices for you. features – material: copper. –
Specifications:
| Assembled Product Dimensions (L x W x H) | 1.97 x 0.39 x 0.08 Inches |
18. Alnicov 4pcs Guitar Neck Shims 0.2mm 0.5mm 1mm Thickness Brass Shims For Electric Guitar Bass Luthier Tools(Chrome)
Product Details:
Made of solid metal to match the guitar neck keep these on hand for a quick turnaround on this common repair used to change the angle of a bolt-on guitar neck,giving your guitar a better sound quality the guitar shims set includes 3 thickness sizes brass shims: 0.2mm(2pcs),0.5mm and 1mm,necessary luthier tools for electric guitar bass players the guitar neck shims are very easy to operate and install description: 1. made of brass material,designed for long time use and durable 2. guitar shims set,with 3 thickness sizes 3. standard material,accurate size for giving your guitar better sound quality 4. easy to carry, economical and durable 5. compact and lightweight,easy to install,can be replaced specifications: product name:guitar neck shim color:chrome material:brass thickness: 0.2mm,0.5mm,1mm item weight:6g package included: 2pcs x 0.2mm shims 1pcs x 0.5mm shims 1pcs x 1.0mm shims
Specifications:
| dimensions | 9 x 7 x 0.02 cm; 10 Grams |
19. Stewmac Neck Shims For Bass, Blank, Set Of 3
Product Details:
Full contact, precisely tapered to change the angle of a bolt-on neck, players and repair shops have used shims for years. those kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. as dan erlewine describes in his guitar player repair guide: "this gap may cause an upward kink in the neck. and many players feel they lose tone unless firm contact is maintained between the neck and the body." dan creates tapered shims that cover the entire heel of the neck. with these bolt-on shims, that work is done for you. attention repair shops: making a quality shim takes time. keep these on hand for a quick turnaround on this common repair. these shaped shims fit most neck pockets with a rounded heel. this set includes 3 hard maple shims, each at a different taper for changing the pitch of any bolt-on neck: 0.25-degree shim offers the most versatility stacking them will let you really dial in the neck angle you're after. 0.5-degree taper is the one you'll reach for most often it works great on fender and many other solidbody guitars. 1-degree taper is great for basses with a post mounted bridge. dimensions: 2-1/2 inch x 3-7/8 inch (63.50mm x 98.43mm) taper specs (approximate): 0.25-degree tapers from 0.030 inch to 0.019 inch (0.76mm to .048mm) 0.5-degree tapers from 0.028 inch to 0.008 inch (0.71mm to .020mm) 1-degree tapers from 0.060 inch to 0.010 inch (1.52mm to .025mm)
20. Fender Original Guitar Or Bass Neck Shims 1950's
Product Details:
To see them clearer click on the big photo:hard to find. these are actual fender factory black shims . they came off of late '50's and early fenders. they could be used for any fender neck. they are different thickness's as you can see in the pics. one was cut, but 100% functional. you get the 4 you see here. the last photo is of a fender neck that was removed for the 1st time since new shows the factory installed shim (you do not get that one). you must buy them all together.
