Are you looking for the Speaker For Bass Guitar? If so, you’ve come to the right place.
Choosing the Speaker For Bass Guitar can be difficult as there are so many considerations, such as B&C Speakers, FaitalPRO, Eminence, Celestion, Jensen Loudspeakers, Ampeg, Carvin, Altec Lansing, Seismic Audio. We have done a lot of research to find the top 20 Speaker For Bass Guitar available.
The average cost is $126.29. Sold comparable range in price from a low of $89.99 to a high of $219.99.
Based on the research we did, we think Eminence Legend CA1059 10" Bass Guitar Speaker 8 Ohm is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Speaker For Bass Guitar (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
Features:
- The 98.7 db sensitivity helps reduce the noise distortion for a clear sound quality
- Neodymium driver helps in less power consumption for efficient performance
- Change the damaged 10" speaker of your bass guitar with this replacement unit
$154.99
4.7
Features:
- Power rating: 300 w
- Impedance: 8 ohm
- Frequency response: 47 hz to 3 khz response
$144.99
4.8
Features:
- This copper voice coil helps generate immersive bass quality
- Developed with 8 ohms impedance to deliver powerful sound
- Neodymium magnet cone helps improve the sensitivity of this speaker
Features:
- Copper coil offers optimal power conduction for enhanced efficiency
- Crafted with kevlar loaded paper for increased audio distribution
- Chassis built with steel, it helps provide an enhanced structural strength
Features:
- Ideal for pro audio and bass guitar applications as a mid-range speaker.
- Useful in both sealed or vented enclosures.
- Works well in single or multi driver designs.
Features:
- Model #: sa-115
- 300 watts rms / 8 ohms
- 40 hz – 5k hz / 96 db
$144.99
4.7
Features:
- Ferrite magnet helps enhance the sensitivity of the speakers
- Vented cores help keep the speakers cool to prevent overheating
- Polyimide coated copper voice coil generates immersive bass quality
$119.99
4.9
Features:
- Recommended for professional audio and bass guitar applications
- Great as a woofer/mid-bass or midrange in vented monitors, satellites and multi-way enclosures
- Suitable for bass guitar, keyboards, club music systems and stage monitors
$139.99
4.9
Features:
- Driver that delivers warm, rich tone and deep bass
- This 250w driver is at home in small sealed enclosures
- Also works well in pro audio and home hi-fi applications
$109.00
4.8
Features:
- The 96 db sensitivity offers reduced noise and minimal distortion for an enhanced audio experience
- Neodymium magnet cone helps improve the sensitivity of this speaker
- Developed with 8 ohms impedance to deliver powerful sound output
$99.99
4.7
Features:
- Neodymium magnet for lightweight performance
- Copper voice coil on polyimide former
- Non-vented core
$116.55
4.9
Features:
- Nominal basket diameter: 12 in, 304.8mm.
- Nominal impedance: 8 ohms.
- Power rating: 150w.
$134.99
4.0
Features:
- Copper voice coil on polyimide former
- Neodymium magnet with non-vented core
- Pressed steel basket
Features:
- Truncated frame allow for close driver to driver placement for multi-driver systems
- Cast aluminum frame will take the abuse of pro sound
- Powerful low frequency output in vented enclosures
$142.66
5.0
Reviewers Noted:
Sound quality . Distortion
Features:
- The smallest portable rechargeable dedicated subwoofer 3" long throw woofer
- 40w amplifier
- Air flow optimised folded port add deep bass to your minirig system rechargeable with up to 80 hours battery life 3.5mm input/output
Features:
- M-roll surround for higher excursion and less cone breakage
- Double dipped cone apex for a really strong cone neck
- Bumped back plate for greater incursion before damage
Features:
- The 100 db of sensitivity helps minimize noise distortion for an improved performance
- Designed with a paper cone to provide clear and dynamic sound quality
- Copper voice coil helps provide ruggedness and enhanced power control
Features:
- Specifications
- Nominal basket diameter: 12 inch, 304.8mm
- Nominal impedance*: 8 ohms
Features:
- The frequency response of 50 hz – 5 khz offers an immersive and crisp sound quality
- Developed with 8 ohms impedance to deliver powerful sound output
- This 12" woofer with pressed-steel basket produces rich and balanced bass
Features:
- Experience amazing sound quality with this guitar speaker
- The 75w rms power lets the speaker work longer with continuous power
- Its 8 ohms impedance helps to reduce the distortion of sound
1. Eminence Legend Ca1059 10" Bass Guitar Speaker 8 Ohm
Product Details:
Eminence legend ca 1059 500w 10" bass speaker a larger magnet version of the popular legend ca10, the legend ca1059 is a 10" cast-frame bass guitar speaker with a proven track record as the speaker for punch and clarity in many famous oem cabinets throughout the decades. like the ca10, the ca1059's chassis is truncated on the sides for tight fitting in 2x, 4, and 8×10 configurations. along with higher xmax, the ca1059 also features a larger 59oz. ferrite magnet, producing higher efficiency, and lower qts for dampening than its smaller magnet version.
Specifications:
| Power | 500 Watts |
| Nominal Basket Diameter | 10" |
| Frequency Range | 50 Hz – 3.2 kHz |
| Sensitivity | 98.7 dB |
| Magnet | Ferrite |
Reviews:
Eminence Legend CA1059 has a great sound that can handle the low end while playing a 5 string bass. I have used these speaker for the last 2 years and never had I had a problem with the quality of this product. Which made it easier for me to invest in a new pair of speaker to up date my bass cabinet.
2. Eminence Legend Cb158 15" Bass Guitar Speaker 8-Ohms
Product Details:
This eminence legend is in great shape and sounds fantastic. it has been well cared for and never abused. it s lived in a custom made 2×15 cab with a padded cover and only had about 50 watts through it. over all the speaker is in near mint condition and functions perfectly. foam can be added to the back lip if you intend to front load it, just send me a message after purchasing. note, i have 2 speakers available. they are identical aside from the sticker.
Specifications:
| Nominal Basket Diameter | 15 inch, 381mm |
| Nominal Impedance | 8 ohms |
| Resonance | 34Hz |
| Usable Frequency Range | 47Hz – 3kHz |
| Sensitivity | 98dB |
| Magnet Weight | 80 oz. |
| Gap Height | 0.37 inches, 9.53mm |
| Voice Coil Diameter | 2.5", 63.5mm |
| Resonant Frequency (fs) | 34Hz |
| DC Resistance (Re) | 6.15 |
| Coil Inductance (Le) | 0.33mH |
| Mechanical Q (Qms) | 5.9 |
| Electromagnetic Q (Qes) | 0.36 |
| Total Q (Qts) | 0.34 |
| Compliance Equivalent Volume (Vas) | 336 liters / 11.9 cu.ft. |
| Peak Diaphragm Displacement Volume (Vd) | 411cc |
| Mechanical Compliance of Suspension (Cms) | 0.31mm/N |
| BL Product (BL) | 16 TM |
| Diaphragm Mass Inc. Airload (MMs) | 70 grams |
| Efficiency Bandwidth Product (EBP) | 95 |
| Maximum Linear Excursion (Xmax) | 4.8mm |
| Surface Area of Cone (Sd) | 856.3 cm2 |
| Maximum Mechanical Limit (Xlim) | 9.5mm |
| Sealed | 54-65 ltr/1.9-2.3 cu. ft. |
| Vented | 54-159 ltr/1.9-5.6 cu. ft. |
| Driver Volume Displaced | 239 cu.in. / 3.92 liters |
| Overall Diameter | 15.21 inches, 386.4mm |
| Baffle Hole Diameter | 14 inches, 355.3mm |
| Front Sealing Gasket | Fitted as standard |
| Rear Sealing Gasket | Fitted as standard |
| Mounting Holes Diameter | 0.28 inches, 7.1mm |
| Mounting Holes BCD | 14.56 inch, 369.9mm |
| Coil Construction | Copper voice coil |
| Coil Former | Polyimide former |
| Magnet Composition | Ferrite magnet |
| Core Details | Vented and extended core |
| Basket Materials | Die-cast aluminum basket |
| Cone Composition | Paper Cone |
| Cone Edge Composition | Cloth cone edge |
| Dust Cap Composition | Solid composition paper dust cap |
Reviews:
I have a Rumble 1 x 15 cabinet. I wanted to upgrade from the Eminence-Made for Fender speaker. At the advise of an Eminence Tech I purchased the CB158. It sounds great! Clear deep tones I plan on buying a second Rumble 1 x 15 cabinet and I'll upgrade that one also! The sale price made it a great value!Chuck
You can experience quite a bit of satisfaction when a product you paid a fair amount of money for just plain works. And boy does this speaker work. The solid bass tones that come out of this baby has brought my 80s something Fender Bassman Compact back to life. I was happy all the bolt holes lined up with the pre drilled holes of the amp. The only little drawback is that it has made my amp heavier. Not a bad trade off for the quality sound that this speaker delivers.Darren
I refurbished an Ampeg 115hp bass cabinet and installed a CB158 15". The speaker provides tremendous frequency response, tight solid bottom end with crisp clean highs. I no longer use the horn in the cabinet…there is no need. I highly recommend this speaker to get the most out of a bass rig. It also pairs very well with my Ampeg PF210HE.Francis L
3. Eminence Basslite S2012 12" Bass Guitar Speaker
Product Details:
Look inside most name brand bass amps and youll find custom designed eminence bass guitar speakers. the people who make them know what bass players want. from fast and tight to fat and round eminence speakers give you the tone to hold it all together. you dont have to break your back or your bank account either. upgrade your rig with classic eminence legend speakers. and eminence basslite speakers give you all the power and tone without the weight. from melodic runs to driving rhythm no other speaker does bass like eminence.
Specifications:
| Impedance | 8 ohms |
| RMS Output Power | 150 W |
| Sensitivity | 97 dB |
| Minimum Frequency Response | 49 Hz |
| Maximum Frequency Response | 4.50 kHz |
Reviews:
I spent DAYS reading all of the specs on the various Eminence NEO speakers, and then I saw the specs on these, and they were CLOSER to what I wanted. I put two of them in a 2-12 cabinet with a Blonde Bassman Clone, and they are EXACTLY what I want. I can use them for bass, and I can use them with my heavy string Tele and Gretsch guitars. they really sound great. And the cabinet is SO LIGHT. I am going to be replacing several of my very heavy EVM's in the future with these. NO, they are not an EVM or a JBL, but they are more than ten pounds lighter each.lehm4206
4. Celestion Pulse10 10" 200w Bass Speaker
Product Details:
With its robust steel-chassis, the celestion pulse10, provides a rock-solid bass performance whether alone in a single speaker combo, in a 4×10 or even an 8×10 cab. expect a tight, punchy low end with a warm mid-range that's full of presence, bringing focus and articulation to your playing. this heavy-duty driver truly delivers bass you can feel as well as hear.
Specifications:
| Product Type | Bass speaker |
| Chassis Material | Steel |
| Coil Material | Copper |
| Former Material | Polyimide |
| Nominal Diameter | 10" |
Reviews:
Excellent replacement speakers for any 8ohm 4×10 cab totally blow away stock ampeg speakers by a mile,nice punchy sound I also have the 15 inch model, 5 and 6 string players will definitely need it together the 4x10s and the 15 improved my tone more than I hoped they would these are some of celetions first bass speakers and i would have to say they hit the bullseye with them,good price for great speakers good celestionBassman2112
Jsem amatér. Odešlo mi 30 W kombo (zesilovač) a z něj jsem použil bednu, kde byl původně také 10-palcový reproduktor. Přikoupil jsem 300 W basovou hlavu Boehringer BXD3000H (za 4090 Kč), která váží cca 3,5 kg !!! takže mám za cca 6000 Kč lehce přenosné vybavení, hmotnostně na úrovni komba, které je schopné s 8 W reproduktorem vydat ze sebe výstup až cca 180 W RMS a ozvučit kromě hospůdek i větší prostory. Kdybych pokročil v hudební kariéře, mohu koupit 4 W reproduktor a dostat se tak na 300 W RMS. Zvuk pro mé potřeby skvělý, za kombo bych neměnil.
I had some old speakers from a bar. They needed to be reconed. For about the same cost as a reconing kit, I purchased two Celestion Pulse speakers. Unlike the bar speakers, these are intended for bass guitar. I put together a Baltic Birch speaker box and mounted them. So far they work. Little undue resonance. Good heavy magnets on these speakers.Daniel
5. Eminence Legend Bp102-4 10" Bass Guitar Speaker, 4 Ohm
Product Details:
Specifications:
| maximum power | 400w |
| voice coil diameter | 2'', 50.8mm |
| magnet composition | ferrite magnet |
| cone composition | paper cone |
| nominal basket diameter | 10'', 254mm |
| magnet weight | 38oz |
| Driver Size | 10" |
| Weight (Approximate) | 8.90 lb |
| Speaker Diameter | 10" |
| Diameter | 10.1" |
| PMPO Output Power | 400 W |
| Minimum Frequency Response | 40 Hz |
| Maximum Frequency Response | 2 kHz |
| Sensitivity | 91 dB |
| Application/Usage | Indoor/Outdoor |
| Impedance | 4 Ohm |
| RMS Output Power | 200 W |
Reviews:
I wanted to try my hand at building my own bass cab to complement my amp head and because I wanted a quality sound I decided to go with Eminence, since you can find them in a lot of high end bass cabs like Ampeg and Basson. I didn't buy these at first, I bought the B102's instead and was disappointed with the end product. There wasn't enough clean low-end, and, I tuned the cab too low to compensate for that and it was a muddy tone that came out of an expensive set of speakers. So a year later I tried it again, but, I bought these on sale (BP 102's) and also bought the Eminence compression driver; Horn; Cabinet ready crossover. I now have a 210 bass cab that sounds better than any cab I've ever heard. I recently purchased a new bass amp (Markbass Big Bang) and together they are a match made in BASS HEAVEN. In fact without the purchase of the new amp, I may have never written this review, I've had theses speakers for over 2 yrs. So if you need to replace a 10" driver or you want to custom build a cab, this is the best driver for the money you can buy. But remember, without a tweeter or compression driver you'll be disappointed.Jmac
Searching for something better in my current upgraded ESS AMT3's, I took a change on these after modeling them in BassBoxPro. All I can say is wow!! These speakers totally kick some tail. Clean deep, and don't loose their composure under high volumes. However the biggest thing is detail. What better to produce bass guitar/drums like a live performance then a real bass guitar speaker?!?! Luckily these go lower then most, pretty amazing for the price. I have 2 of these in the AMT3 stock, but braced enclosure. 2.76 liter. Heavily damped with 1 1/2" foam on walls, and 2 sheets of Auralux 2" wedge foam directly behind the woofers. 2x 3" ports, 6" length. That tunes the box to 36 hz. Don't be afraid to tune low, the lower the better. They still can handle a ton of power, xlimit is 10 mm. Never cam close because the bass is tight, clean and deep. Well controlled, but oh so sensitive!! Wow the detail of these woofers just blows my mind!! Nothing even comes close in normal "audio" woofers. Be aware however to cross over to the mid around 250hz, these don't do mids well. But who cares in a 3-way? A Alpha 6A, or larger mid woofer would be ideal. Enjoy while these are still a still!! Who needs expensive audio woofers that kill all the detail anyway?Mojo
I replaced the dead speaker in my old practice bass amp with this speaker and was quite surprised how good it sounded and was surprised that it was better than the original in sound quality. gave new life to that old amp and saved me the cost of new amp. Good solid output in a sealed cabinet down to the low E on my 4 string fender bass.hotshoetom
6. Seismic Audio – 15" Bass Guitar Speaker Cabinet 300 Watts Rms 115 Speakers 1×15
Product Details:
The sa-115 dual ported 1×15 bass guitar speaker cabinet provides great low end reinforcement along with great articulation in the mid range. loaded with one of our quake 15 speakers , the sa-115 packs a powerful punch! at 200 watts rms, the sa-115 makes for a great smaller rig or pair it up with a 2×10 or 4×10 cab for a powerful full range set up. great bass speaker cabinets are very hard to find, especially at a decent price. the seismic audio brand was designed to make the professional musician, as well as the musician low on cash, sound great. with your purchase, you will receive a one 1×15 bass guitar speaker cabinet pictured and described above. so, put it in your cart today and get ready for years of trouble-free, crystal clear sound!
Specifications:
| Product Dimensions | 25 x 14 x 18 inches |
| Compatible Devices | Guitar |
| Power Source | Corded Electric |
| Wattage | 300 watts |
Reviews:
Received my order 3 days after my order on a Wednesday. Have not had very much time to play with it. Have it paired with a Fender 2×10" Rumble cab. This 15" cab provides a much needed bottom that the Rumble(lots of mid)does not give. I plan to use this for larger indoor/outdoor venues that the Rumble will not cover. Using an Ampeg PF 350 head so this and the Rumble are well within the power handling of 350 watts at 4 ohms.Peter M.
Great addition to my rig. Prior to purchase I was playing an Ampeg PF 350 into a Rumble 2×10" cab. I was lacking some bottom end, the Rumble was a little weak there but is good for mid to high end. This cabinet exceeded what I was looking for, strong bottom end. I'm using both as a stack with the 15" cab on the bottom. I've only used it for practice but have an upcoming outdoor gig. I'm sure my set up will handle that. Would recommend SA for all speaker needs, both Bass and Guitar.Peter A.
7. Eminence Alpha-15a 15" Bass Guitar Speaker 8-Ohms
Product Details:
Specifications:
| Maximum Frequency Response | 3.50 kHz |
| Impedance | 8 Ohm |
| RMS Output Power | 200 W |
| PMPO Output Power | 400 W |
| Minimum Frequency Response | 46 Hz |
Reviews:
Many may disagree, but this driver is completely unable to reproduce bass accurately because of its weak motor (small magnet). Heck, 25oz is too small for an 8" driver! Its 'rolling' sound might satisfy Bob Carver, but it has no punch. It has lots of output and smooth midbass in an open baffle, but you pay dearly for it with a slow, muddy sound. How anyone who calls themself an audiophile can be satisfied with it is beyond me.dipoleprechaun - 24841
I bought this as a replacement speaker for a Peavey bass amp. Could not be happier! Sounds great!dj_us_ucjeve
8. Eminence Delta-10b 10" Bass Guitar Speaker
Product Details:
Specifications:
| Nominal Diameter | 10" |
| Power Handling (RMS) | 350 Watts |
| Power Handling (MAX) | 700 Watts |
| Impedance | 16Ω |
| Frequency Response | 71 to 3,700Hz |
| Sensitivity | 98dB 2.83V/1m |
| Voice Coil Diameter | 2.5" |
| Resonant Frequency (Fs) | 65Hz |
| DC Resistance (Re) | 11.6Ω |
| Voice Coil Inductance (Le) | 0.79mH |
| Mechanical Q (Qms) | 8.34 |
| Electromagnetic Q (Qes) | 0.35 |
| Total Q (Qts) | 0.33 |
| Compliance Equivalent Volume (Vas) | 1.27ft³ |
| Mechanical Compliance of Suspension (Cms) | 0.21mm/N |
| BL Product (BL) | 19.5T·m |
| Diaphragm Mass Inc. Airload (Mms) | 28g |
| Maximum Linear Excursion (Xmax) | 3.5mm |
| Surface Area of Cone (Sd) | 344.9cm² |
| Cone Material | Paper |
| Surround Material | Cloth |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Kapton / Polyimide |
| Basket / Frame Material | Steel |
| Magnet Material | Ferrite |
| Overall Outside Diameter | 10.09" |
| Baffle Cutout Diameter | 9.18" |
| Sealed Volume | 0.6ft³ |
| Sealed F3 | 185Hz |
| Vented Volume | 1ft³ |
| Vented F3 | 72Hz |
Reviews:
Excellent mid-bass. I built a pair of ported high/mid cabinets, each using two of these and a high quality tweeter. Wired them up with Zobel and crossover networks. Very efficient with good power handling. Good transient response and clarity. Vocals, guiter, keyboard-piano, and things in that range really come through. Better clarity than typical high/mid cab with 12 or 15 inch woofer. Not much low bass, but not what they are designed for. Use with bottoms. Would buy again.Mike - 10766
Very crisp and can take a lot of power, awesome soundWalls Walls
9. Eminence Legend Bp122 12" Bass Guitar Speaker 250w 8 Ohm
Product Details:
The eminence legend bp122 speaker is a 12" bass guitar driver that delivers warm, rich tone and deep bass. a big brother to the popular 10" legend bp102, this nominal power 250-watt driver offers the same versatile skill set – completely comfortable at home in small sealed enclosures, as well as in pro audio and home hi-fi applications. the eminence bp122 12 model has a program power rating of 500 watts at 8 ohms, features a 2 voice coil, and has a usable frequency range of 35 hz – 2.3 khz.
Specifications:
| Nominal Basket Diameter | 12" (305 mm) |
| Nominal Impedance | 8 O |
| Program Power | 500 W |
| Watts | 250 W |
| Resonance | 35 Hz |
| Usable Frequency Range | 35 Hz – 2.3 kHz |
| Sensitivity | 94.1 dB |
| Magnet Weight | 38 oz. |
| Gap Height | 0.31" (7.9 mm) |
| Voice Coil Diameter | 2" (51 mm) |
| Resonant Frequency (fs) | 35 Hz |
| DC Resistance (Re) | 5.66 O |
| Coil Inductance (Le) | 0.84m H |
| Mechanical Q (Qms) | 9.26 |
| Electromagnetic Q (Qes) | 0.57 |
| Total Q (Qts) | 0.54 |
| Compliance Equivalent Volume (Vas) | 5.56 cu.ft. (157.4 liters) |
| Peak Diaphragm Displacement Volume (Vd) | 330.1 cc |
| Mechanical Compliance of Suspension (Cms) | 0.4 mm/N |
| BL Product (BL) | 10.55 TM |
| Diaphragm Mass Inc. Airload (MMs) | 50 grams |
| Efficiency Bandwidth Product (EBP) | 62 |
| Maximum Linear Excursion (Xmax) | 6.2 mm |
| Surface Area of Cone (Sd) | 532.4 cm2 |
| Maximum Mechanical Limit (Xlim) | 12.4 mm |
| Driver Volume Displaced | 0.071 cu.ft. (2 liters) |
| Overall Diameter | 12.26" (311.4 mm) |
| Baffle Hole Diameter | 11.08" (281.4 mm) |
| Mounting Holes Diameter | 0.25" (6.4mm) |
| Mounting Holes BCD | 11.71" (297.4mm) |
| Net Weight | 9 lbs (4.08 kg) |
| Coil Construction | Copper voice Coil |
| Coil Former | Polyimide former |
| Magnet Composition | Ferrite magnet |
| Core Details | Non-vented core |
| Basket Materials | Pressed Steel basket |
| Cone Composition | Paper cone |
| Cone Edge Composition | Cloth cone edge |
| Dust Cap Composition | Solid composition felt dust cap |
| Manufacturer Part Number (MPN) | LEGEND BP 122 |
Reviews:
I put a pair of these in EV TL 806 Vented cabinets but the sound was not so good a bit hollow, empty and lacking punch. I built a 1.8 cu. ft. sealed cab and the sound was much improved smooth and punchey. I play a Rickenbacker bass that can be quite bright/ boomy on top end and these speakers handle it well.Randy
10. Celestion Bn10-200x 10" 200w Neodymium Bass Guitar Speaker 8 Ohm
Product Details:
Light in weight but certainly not in performance, the bn10-200x neodymium bass speaker delivers a rich warm tone combined with a powerful low end punch. not every player wants a super-clean, high-fidelity bass sound. characterised by an extended low end and greater linear excursion, green label speakers push out every note with a rich, warm tone and a powerful low-end thump. green label speakers are primed for high-powered rock performances, where a full-bodied, warm, defined tone is essential.
Specifications:
| Magnet | Neodymium |
| Frequency Range | 45 Hz – 3500 Hz |
| Sensitivity | 96 dB |
| Voice Coil Diameter | 50.8 mm |
| Coil Material | Copper |
Reviews:
So far I'm impressed with the sound and weight reduction over the Bugera 10" they replaced. If they can stand up to 450 watts for the foreseeable future, I'll add the fifth star. My only reservation was the price but if they are a rugged as I hope they are, they'll be the right investment. Total weight savings for 2 10"- 10 pounds.JAMES
Went three stars on the features because its a driver only. Five string bass running through 1×10 combo from Line6. This driver much better than factory installed. Everything below B1 was total mud before. This Celestion has all the definition i want. Can play C#1 fifths and no distortion or mud just rich low end. Wonder what four in a 4×10 would sound like? Probably cause a tidal wave. Maybe price should be $120? With free shipping I don't care.Guest
11. Eminence Basslite S2010 10" Bass Guitar Speaker
Product Details:
Look inside most name brand bass amps and youll find custom designed eminence bass guitar speakers. the people who make them know what bass players want. from fast and tight to fat and round eminence speakers give you the tone to hold it all together. you dont have to break your back or your bank account either. upgrade your rig with classic eminence legend speakers. and eminence basslite speakers give you all the power and tone without the weight. from melodic runs to driving rhythm no other speaker does bass like eminence.
Specifications:
| Weight | 12 lb |
Reviews:
Using it in a series tuned vented box. Tuned around 65hz for fullrange guitar. Buttery, rich and full. Box net is around 1.25. Powered with 120 watts of hartke head amp. This setup embarrasses the orange setup my kid was using. Plays loud and clean. So loud you would swear the noise is coming from inside your head. Plays bass guitar good as well even though the box is tuned half an octave too high for thatJustin
I am very pleased with this driver in a small ported 1×10 e-bass cabinet tuned to around 60 hz f3. It's got some lungs, good voicing that is smooth but shows some snarl too when you dig in. The 4 lb weight is impressive. I think this would work also as a small, but effective sub for those who like PA quailities to their indoor systems.meep
It is definitely a good speaker, tipping it's hat to a vintage growl while maintaining a slightly modern upper end. I do wish it had spring or threaded terminals. Much more controlled in its mid definition and forwardness than the Deltalite 2510. Definitely good speaker. Only wishes would be better terminals than the spade type, and maybe aluminum frame.thetenyearplan
12. Eminence The Tonker 12" Guitar Speaker, 8 Ohm
Product Details:
The tonker is a hard hitting 12 in. speaker that provides that british flavor players crave for but the harmonic balance to properly tackle any genre. this speaker excels in english, southern and country rock genres for that reason. when eminence was asked to create a speaker with a very fat clean sound in the mid-range but still a very smooth top end they created the tonker. available in 16 and 8 ohms versions.
Specifications:
| Nominal Impedance | 8 Ohms. |
| Watts | 150 W. |
| Music Program | N/A. |
| Resonance | 89 Hz. |
| Usable Frequency Range | 70 Hz – 5 kHz. |
| Sensitivity | 101.5 dB. |
| Magnet Weight | 59 oz.. |
| Gap Height | 0.312-in , 7.9 mm. |
| Voice Coil Diameter | 2-in , 51 mm. |
| Resonant Frequency (fs) | 89 Hz. |
| DC Resistance (Re) | 7.36 Ohms. |
| Coil Inductance (Le) | 0.47m H. |
| Mechanical Q (Qms) | 10.02. |
| Electromagnetic Q (Qes) | 0.49. |
| Total Q (Qts) | 0.47. |
| Compliance Equivalent Volume (Vas) | 34.1 liters / 1.2 cu.ft.. |
| Peak Diaphragm Displacement Volume (Vd) | 41.6 cc. |
| Mechanical Compliance of Suspension (Cms) | 0.09 mm/N. |
| BL Product (BL) | 17.4 TM. |
| Diaphragm Mass Inc. Airload (MMs) | 36 grams. |
| Efficiency Bandwidth Product (EBP) | 181. |
| Maximum Linear Excursion (Xmax) | 0.8 mm. |
| Surface Area of Cone (Sd) | 519.5 cm2. |
| Maximum Mechanical Limit (Xlim) | N/A. |
| Sealed | Acceptable. |
| Driver Volume Displaced | 0.079 cu.ft. / 2.25 liters. |
| Overall Diameter | 12.03-in , 305.6 mm. |
| Baffle Hole Diameter | 11.07-in , 281.2 mm. |
| Front Sealing Gasket | Yes. |
| Rear Sealing Gasket | Yes. |
| Mounting Holes Diameter | 0.25-in , 6.4mm. |
| Mounting Holes BCD | 11.59-in , 294.4mm. |
| Net Weight | 11.1 lbs, 5.03 kg. |
| Coil Construction | Copper voice coil. |
| Coil Former | Polyimide former. |
| Magnet Composition | Ferrite magnet. |
| Core Details | Non-vented core. |
| Basket Materials | Pressed steel basket. |
| Cone Composition | Paper cone. |
| Cone Edge Composition | Paper cone edge. |
| Dust Cap Composition | Zurette dust cap. |
Reviews:
I've been through many, many 12s for Blackface style speakers. These are my faves. For good 60s tones in country and rock with a BF amp these guys work great. Take pedals well. Not shrill or muddy in my experience. Solid surfy bass. Smooth treble. 120 watts which is triple what I would ever throw at em. For a Deluxe or a Pro in a honkytonk bar, these are just the ticket.edol9871
For me the tones of these are somewhere in between American and British. I use these mainly in a 2×10 cab for a fender vibroverb style amp. Vs the Oxford speakers these have a lil more mid focus and rounded highs that work much better with higher gain tones. I also use these with my Marshall origin 50 set relatively clean to get a slightly bigger bottom end than V30s.RockinJohnson
I bought this speaker in the 16ohm version to replace a v30 in my orange ppc1x12. I love the v30 but I mainly use a 100w Marshall DSL100HR and the v30 by itself couldn't handle all that wattage since it's only 60watts. So I decided to go with the swamp thang cause a little more defined low end sounded like a good idea as I play a 7 string ltd (fishman fluence pups) half the time. But I was worried I would loose the highs that we need for attack in high gain situations as well as playing clean which I do very often also. But now that I've played tgrough this speaker I can say that is not a problem whatsoever. This speaker has twice the highs and twice the lows as my v30. Probably a little less midrange but since it's such a powerful speaker it doesn't feel like it's relying on mids the cut through. Full disclosure I've only had the speaker a few hours and played through it a little over an hour but if it sounds this good outta the box I'm confident things will only get better. It's a great sounding speaker in my opinion that would complement any style/set up. I plan on buying an empty Luke 2x12C cab from seismic audio soon so i can pair the ST and the v30 which im lookong forward to. But in the meantime im in no huge hurry since the ST sounds so good by itself.Michael I.
13. Eminence Basslite Bass Guitar Speaker
Product Details:
Continuing to be the popular choice for bass players looking to reduce the weight of their rigs, the eminence basslite sc10 is a 10 speaker optimized specifically for sealed bass cabinets. the ultra-light weight of this vibrant speaker will take the bulk out, but leave the performance in. featuring a 4-ounce neodymium magnet and 2-inch voice coil, this 10-inch speaker is available in 16 and 32 ohms for your 4×10 or 8×10 rig. this 16-ohm model of the eminence basslite sc10 has a program power rating of 300-watts.
Specifications:
| Nominal Basket Diameter | 10", 254 mm |
| Nominal Impedance | 16 O |
| Program Power | 300 W |
| Watts | 150 W |
| Resonance | 46 Hz |
| Usable Frequency Range | 50 Hz – 4.2 kHz |
| Sensitivity | 94.3 dB |
| Magnet Weight | 4 oz. |
| Gap Height | 0.28", 7.1 mm |
| Voice Coil Diameter | 2", 51 mm |
| Resonant Frequency (fs) | 46 Hz |
| DC Resistance (Re) | 12.21 O |
| Coil Inductance (Le) | 0.89m H |
| Mechanical Q (Qms) | 2.23 |
| Electromagnetic Q (Qes) | 0.56 |
| Total Q (Qts) | 0.45 |
| Compliance Equivalent Volume (Vas) | 78.27 liters / 2.76 cu.ft. |
| Peak Diaphragm Displacement Volume (Vd) | 154 cc |
| Mechanical Compliance of Suspension (Cms) | 0.46 mm/N |
| BL Product (BL) | 12.79 TM |
| Diaphragm Mass Inc. Airload (MMs) | 26 grams |
| Efficiency Bandwidth Product (EBP) | 81 |
| Maximum Linear Excursion (Xmax) | 4.4 mm |
| Surface Area of Cone (Sd) | 350.1 cm2 |
| Maximum Mechanical Limit (Xlim) | 9 mm |
| Driver Volume Displaced | 0.03 cu.ft. / 0.84 liters |
| Overall Diameter | 10.08", 256 mm |
| Baffle Hole Diameter | 9.18", 233.2 mm |
| Mounting Holes Diameter | 0.25", 6.4mm |
| Mounting Holes BCD | 9.66", 245.4mm |
| Net Weight | 3.5 lbs, 1.59 kg |
| Coil Construction | Copper voice coil |
| Coil Former | Polyimide former |
| Magnet Composition | Neodymium magnet |
| Core Details | Non-vented core |
| Basket Materials | Pressed steel basket |
| Cone Composition | Curved paper cone |
| Cone Edge Composition | Cloth cone edge |
| Dust Cap Composition | Solid composition felt dust cap |
Reviews:
Excellent bass guitar speaker at a reasonable price. I built a 3.9 cu-ft 4-ohm 410 (3 front + 1 rear) with these and like the way they are voiced. The cab is tuned to 50 Hz with port plugs which can be used to make it sealed for a tighter low end. The SC10-16 is also light weight with good sensitivity and reasonable power handling. With a 3/4" birch ply baffle and 1/2" european poplar ply for the rest of the cab final weight was only 47.6 lbs. (Picture imported with 90 deg rotation)5StringPocket
I used these for replacement in an Ashdown bass amp
I replaced the speakers in a Hartke 2-10 cabinet with these. It sounds great at low volume, but it cannot be used for a gig, even in a small venue. At a moderate volume, anything at or below the low G on a bass makes the speakers rattle (I tried with the speakers outside the cabinet as well, so it's not the cabinet rattling). They don't seem to be able to handle the rated power, so this cabinet will be staying at home.David
14. Eminence Legend Ca10-8 10" Bass Guitar Speaker, 8 Ohm
Product Details:
Specifications:
| Nominal Basket Diameter | 10 inches (254 mm) |
| Nominal Impedance | 8 Ohms |
| Watts | 200 W |
| Music Program | 400 W |
| Resonance | 53 Hz |
| Usable Frequency Range | 50 Hz – 3 kHz |
| Sensitivity | 96.3 dB |
| Magnet Weight | 38 oz. |
| Gap Height | 0.312 inch (7.9 mm) |
| Voice Coil Diameter | 2 inches (51 mm) |
| Resonant Frequency (fs) | 53 Hz |
| DC Resistance (Re) | 4.83 Ohms |
| Coil Inductance (Le) | 0.51m H |
| Mechanical Q (Qms) | 6.53 |
| Electromagnetic Q (Qes) | 0.49 |
| Total Q (Qts) | 0.45 |
| Compliance Equivalent Volume (Vas) | 51.05 liters (1.8 cubic ft.) |
| Peak Diaphragm Displacement Volume (Vd) | 105.7 cc |
| Mechanical Compliance of Suspension (Cms) | 0.3 mm/N |
| BL Product (BL) | 10.07 TM |
| Diaphragm Mass Inc. Airload (MMs) | 31 grams |
| Efficiency Bandwidth Product (EBP) | 109 |
| Maximum Linear Excursion (Xmax) | 3.02 mm |
| Surface Area of Cone (Sd) | 350.1 cm2 |
| Maximum Mechanical Limit (Xlim) | 7.0 mm |
| Driver Volume Displaced | 0.043 cubic ft. (1.22 liters) |
| Overall Diameter | 10.5 inches (266.7 mm) |
| Baffle Hole Diameter | 9.01 inches (228.9 mm) |
| Front Sealing Gasket | Yes |
| Rear Sealing Gasket | Yes |
| Coil Construction | Copper voice coil |
| Coil Former | Kapton former |
| Magnet Composition | Ferrite magnet |
| Core Details | Vented and extended core |
| Basket Materials | Die-cast aluminum basket |
| Cone Composition | Paper cone |
| Cone Edge Composition | Cloth cone edge |
| Dust Cap Composition | Treated paper dust cap |
15. Minirig Subwoofer Portable Rechargeable Bass Speaker – 80 Hour Battery – Black
Product Details:
Minirig subwoofer portable speaker black features:the ultimate upgrade for your minirig sound system! works in harmony with the minirig speakers and minirig mini's. optimising that low end bass sound using airflow technology. powerful 15 watts amplifier, high power custom 74mm driver along with compact internal airflow chamber. upto 80 hours battery life plus charge all your devices whilst out and about. download the minirig app for access to 5 band eq with presets, minirig music, social media and support. connect multiple minirig speakers to one device plus subwoofer conectivity and control. built to last from anodised aluminium. audio in/out 2 x 3.5mm mini jack sockets. made in the uk from the leading portable speaker brand minirig. dimensions- width 101.6mm. height 213mm. weight just 875g.
Reviews:
After my 1st weekend with this phenomenal machine I am very happy indeed with it and the normal MINIRIG I purchased with it. Other than having to deal with complaints about the volume of my sound system the bulk of 3 days I spent completely immersed in sound. With the aid of 2 bootlaces I found I could comfortably hang them both round my neck and dance away from any miserable beeps that didn't want to party. This sub did finally show a little sign of the battery getting flat by showing a touch of red in the blue on the really heavy bass but the quality was still excellent. So basically there is a very good reason why all these subs sell out so fast – My advice is – Do Not Hesitate to buy if you have the chance before they are all gone again.radiopsi
We bought this to go with the Minirig as a gift. I was quite sceptical about the quality of the sound possible from such a unit – being a life long conventional hi fi lover,but to be honest I was amazed at the depth of the sound. It does not distort when on full volume and compliments to sound of the Minirig. More than enough sound and volume to fill our large open plan area.celticmohair
16. Eminence Legend B810 10" Bass Guitar Speaker, 32 Ohm
Product Details:
Surround yourself with thumping bass with this eminence legends bass guitar speaker, featuring a copper voice coil for crystal clear reproduction. this speaker fits in 8 x 10-foot cabinets to deliver quality sound at 49 hz – 5.1 khz so you never miss the lows. a 150w power rating on this eminence legends bass guitar speaker ensures a quality experience.
Specifications:
| Product Type | Stage speaker driver |
| Speaker Type | Passive |
| Speaker Diameter | 10" |
| Continuous Power | 150 Watt |
| Peak Power | 200 Watt |
| Frequency Response | 49 – 5100 Hz |
| Nominal Impedance | 32 Ohm |
| Sensitivity | 92.7 dB |
| Diaphragm Type | Paper cone |
| Magnet Type | Ferrite |
| Driver Details | Speaker driver: woofer driver – 10" – ferrite – paper |
| Recommended Enclosures | Ported – 1.6 – 2.7 cubic feet Sealed – 0.5 – 1.24 cubic feet |
| Diameter | 10.1 in |
| Width | 10.1 in |
| Depth | 4.1 in |
| Weight | 6.7 lbs |
| Diameter | 9.1 in |
| Service & Support | Limited warranty – parts and labor – 7 years |
Reviews:
17. Eminence Delta 15a 15" Speaker
Product Details:
Eminence delta-15a 15" driver 8 ohm the eminence delta-15a 15" speaker is recommended for professional audio as a midbass or stage monitor woofer in sealed enclosures. also suitable as a midbass or woofer in vented pa enclosures, as well as musical instrument systems. model # delta15a features: kapton coil former polyamide-imide coated aluminum voice coil ferrite magnet vented pole piece pressed steel basket paper cone cloth accordion surround power handling (rms) 400 watts power handling (max) 800 watts impedance 8 ohms frequency response 48 to 4,000 hz sensitivity 100 db 1w/1m voice coil diameter 2. 5" magnet weight 56 ounce item dimensions: 17. 9" l x 16. 7" w x 6. 4" h.
Specifications:
| Product Type | Speaker driver |
| Speaker Type | Passive |
| Continuous Power | 400 Watt |
| Peak Power | 800 Watt |
| Frequency Response | 48 – 4000 Hz |
| Nominal Impedance | 8 Ohm |
| Sensitivity | 100 dB |
| Diaphragm Type | Paper cone |
| Magnet Type | Ferrite |
| Speakers Included | 1 x speaker driver – 15" – 400 Watt – 48 – 4000 Hz – 8 Ohm – wired |
| Driver Details | Speaker driver: mid-bass driver – 15" – ferrite – paper |
| Diameter | 15.1 in |
| Weight | 12.35 lbs |
| Diameter | 13.9 in |
| Depth | 6.1 in |
Reviews:
I put this into a 1×15 cab powered by a Carvin head and it just RUMBLES. Eminence quality and sound. Good buy.Spookytoof
I load too many speakers. I believe in Eminence Delta series for several applications. I currently deploy Delta LFA for low frequency support, Delta Pro series for their range and power for PA support, and Delta A for monitors and smaller venue mains. They are reliably consistent and handle power and abusive cartage. Good useable range for any application.
18. Eminence Swamp Thang 12" Guitar Speaker, 8 Ohm
Product Details:
This item was returned in mint condition. it is free of any performance issues, and has no scratches, blemishes, or other cosmetic flaws. awesome bottom end, great sustain, and a powerful, chunky sound. great for blues, rock and jazz. ideal for a one, 2, or 4×12"closed-back setup. 150w rms handling, 300w peak. 8 or 16 ohm impedance. eminence recommends the swamp thang-16 as an alternate replacement in the fender fm412 cabinet.
Specifications:
| Product Type | Speaker driver |
| Speaker Type | Passive |
| Continuous Power | 150 Watt |
| Frequency Response | 70 – 4000 Hz |
| Nominal Impedance | 8 Ohm |
| Sensitivity | 102 dB |
| Magnet Type | Ferrite |
| Speakers Included | 1 x speaker driver – 150 Watt – 70 – 4000 Hz – 8 Ohm – wired |
| Driver Details | Speaker driver: mid-bass driver – 12" – ferrite – polyamide |
| Diameter | 12 in |
| Weight | 11.09 lbs |
| Diameter | 11.6 in |
| Depth | 5.2 in |
Reviews:
I've been through many, many 12s for Blackface style speakers. These are my faves. For good 60s tones in country and rock with a BF amp these guys work great. Take pedals well. Not shrill or muddy in my experience. Solid surfy bass. Smooth treble. 120 watts which is triple what I would ever throw at em. For a Deluxe or a Pro in a honkytonk bar, these are just the ticket.edol9871
For me the tones of these are somewhere in between American and British. I use these mainly in a 2×10 cab for a fender vibroverb style amp. Vs the Oxford speakers these have a lil more mid focus and rounded highs that work much better with higher gain tones. I also use these with my Marshall origin 50 set relatively clean to get a slightly bigger bottom end than V30s.RockinJohnson
I bought this speaker in the 16ohm version to replace a v30 in my orange ppc1x12. I love the v30 but I mainly use a 100w Marshall DSL100HR and the v30 by itself couldn't handle all that wattage since it's only 60watts. So I decided to go with the swamp thang cause a little more defined low end sounded like a good idea as I play a 7 string ltd (fishman fluence pups) half the time. But I was worried I would loose the highs that we need for attack in high gain situations as well as playing clean which I do very often also. But now that I've played tgrough this speaker I can say that is not a problem whatsoever. This speaker has twice the highs and twice the lows as my v30. Probably a little less midrange but since it's such a powerful speaker it doesn't feel like it's relying on mids the cut through. Full disclosure I've only had the speaker a few hours and played through it a little over an hour but if it sounds this good outta the box I'm confident things will only get better. It's a great sounding speaker in my opinion that would complement any style/set up. I plan on buying an empty Luke 2x12C cab from seismic audio soon so i can pair the ST and the v30 which im lookong forward to. But in the meantime im in no huge hurry since the ST sounds so good by itself.Michael I.
19. Eminence Beta-12a 12" Woofer
Product Details:
Specifications:
| Woofer Size | 12" |
| Power Output | 500 W |
| Impedance | 8 Ohms |
| Frequency Range | 50 Hz – 5 kHz |
| Basket Material | Steel |
Reviews:
Sound: Replaced bass in a set of Studio Monitor speakers connected to NAD amp. Superb sound: clear, crisp at any volume. Much depends on a quality amp so, if you're thinking upgrade, consider the whole package to get the most out of Eminence speakers. Overall: No past experience with Eminence but researched the heck out of replacing bass before I settled on these. From what I learned, Beta's should last many years and they were a breeze to swap out the existing speakers. All it took was a screwdriver and in ten minutes I was listening to great music.
Quality and construction appear very good and I really appreciate the gasket on the back side of the basket for mounting on the front of the baffle. The packing from Eminence was excellent. I installed these speakers in mid sized sealed cabinets along with the 270-125 heavy duty titanium super tweeters. Over all I m very pleased. I am powering them with a 150W per channel mixer. These will play extremely loud with no hint of distortion. No rubs, buzzes, or other issues. The sound is fairly natural. Very punchy in the mid range. Vocals and guitar seem to come to the front of the mix. The bass is more subdued. Of course, this is probably due to overlap with the tweeters. At low and medium volume they still sound good. Almost as good as decent Hi-Fi speakers and better than most PA speakers on recorded music. I think they ll work really well for my indented purpose as PA vocal speakers.Parts Express Customer - 12732
Overall: bought this speaker after purchasing a cheaper speaker to upgrade a monitor cabinet. the cheaper speaker had a great appearance but was not pushing the db's. So I searched for a better alternative.. These Beta speakers are loud!!! and great for vocals.. They cover all frequencies perfectly.. The spec sheets do not lie.. I will be buying moreGregg
20. Eminence Legend 1275 12" 75w Guitar Speaker
Product Details:
Put the eminence legend 1275 12" guitar speaker in your combo amp or speaker cabinet, and you'll have all the warm, smooth tone you can handle. the 75w legend 1275 is ideal for rock and blues styles, with punchy lows and warm mids that give way to crisp highs. eminence speakers are powering the tone of some of the most iconic guitarists in the world – join the club with the eminence legend 1275 12" guitar speaker eminence legend 1275 12" guitar speaker features at a glance vintage-voiced 12" guitar speaker with a meaty tone crisp and articulate top end with open highs tight and punchy lows, warm mids, suitable for blues and rock 75w 80hz-5.1khz 8 ohms 7 lbs.
Specifications:
| Product Type | Guitar speaker |
| Power Handling | 75 Watts RMS |
| Diameter | 12" |
| Impedance | 8 ohms |
| Weight | 7.0 lbs |
Reviews:
Related posts:
- 1/4 Electric Guitar For Sale (2024 Update)
- 120 Watt Guitar Amp For Sale (2024 Update)
- 12 Bass Guitar Speaker For Sale (2024 Update)
- Guitar Amp And Cord For Sale (2024 Update)
- Guitar Amp Speaker Cable For Sale (2024 Update)
- Guitar Amp Speaker Cable Extension For Sale (2024 Update)
- Kalos By Cecilio Electric Guitar For Sale (2024 Update)
- Sparkly Pink Electric Guitar For Sale (2024 Update)
- Speaker Cable Guitar Amp For Sale (2024 Update)
- Using Bass Amp For Guitar For Sale (2024 Update)
