Are you looking for the Ridge On Guitar Neck? If so, you’ve come to the right place.
Choosing the Ridge On Guitar Neck can be difficult as there are so many considerations, such as WD Music, DiMarzio, Seymour Duncan, Fender, Stewart-MacDonald, ammoon, Solo Guitar. We have done a lot of research to find the top 20 Ridge On Guitar Neck available.
The average cost is $342.43. Sold comparable range in price from a low of $199.99 to a high of $599.99.
Based on the research we did, we think Epiphone Casino Worn Electric Guitar – Worn Ebony is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Ridge On Guitar Neck (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reviewers Noted:
Good sound quality . Attractive . Lightweight . Well made . Durable
Features:
- The classic casino in three new worn finishes
- P-90 single coil pickup
- Legendary tone
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfort
Features:
- Number of packages: 1
- Package weight: 1.2 kg
- Package dimensions (l × w × h): 8.128 zm 18.415 zm 75.946 zm
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- 13/32 (10 mm) headstock thickness
- 13.5 mm thickness at the 1st fret
- 21 mm thickness at the 12th fret
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- Genuine fender stratocaster neck crafted at fender's ensenada, mexico manufacturing facility
- Comfortable flat oval-shaped profile and 12"-radius pau ferro fingerboard with 22 jumbo frets
- The synthetic bone nut is pre-slotted with pilot grooves for accurate spacing when filing the final string slots
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfort
Features:
- 13/32 (10 mm)headstock thickness
- 540 (13.71 mm)thickness at the 1st fret
- 752 (19.10 mm)thickness at the 12th fret
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfort
Features:
- 1951 u-shaped neck profile
- 21 6105 frets
- Synthetic bone nut
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- 11/32 (8.73 mm) headstock thickness
- 13.7 mm thickness at the 1st fret
- 21.01 mm thickness at the 12th fret
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- 397" (10.08 mm)headstock thickness
- 540" (13.71 mm)thickness at the 1st fret
- 820" (20.82 mm)thickness at the 12th fret
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- This replacement neck is for a fender or squier by fender guitar.
- Dimensions 3.30×7.10×30.00 in / weight 2.80 lb.
- Your project is our project!
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfort
Features:
- This is the exact neck you'll receive!
- Weight – 1lbs 2.8oz.
- This replacement neck is for a fender or squier by fender guitar.
$199.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- This is the exact neck you'll receive!
- This replacement neck is for a fender or squier by fender guitar.
$249.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfort
Features:
- Maple neck
- Pau ferro fingerboard
- 25.5" scale length
$399.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- Make sure this fits by entering your model number.
- Original fender.
- Package weight: 2.95 pounds.
$299.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- This is the exact neck you'll receive!
- Weight – 1lbs 3.8oz.
- This replacement neck is for a fender or squier by fender guitar.
$599.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- Replacement guitar necks
- Fender american professional ii jazzmaster neck
- Rosewood fingerboard
$299.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- This is the exact neck you'll receive!
- Weight (sn mxe22143407) – 1lb 2.7oz.
- This replacement neck is for a fender or squier by fender guitar.
$349.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- Genuine fender telecaster neck crafted at fender's ensenada, mexico manufacturing facility
- Comfortable flat oval-shaped profile and 12"-radius pau ferro fingerboard with 22 jumbo frets
- The synthetic bone nut is pre-slotted with pilot grooves for accurate spacing when filing the final string slots
$216.00
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- This is the exact neck you'll receive!
- Weight – 1lbs 2.0oz.
- This replacement neck is for a fender or squier by fender guitar.
$249.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- 404" (10.26 mm) headstock thickness
- 540" (13.71 mm) thickness at the 1st fret
- 820" (20.82 mm) thickness at the 12th fret
$599.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- The neck pocket has 4 offset pre-drilled pilot holes so if it is being installed on a standard body, a fifth pilot hole will need to be drilled.
- Special order only.
- This replacement neck is for a fender or squier by fender guitar.
1. Epiphone Casino Worn Electric Guitar – Worn Ebony
Product Details:
Since 1961, the legendary casino has been epiphone's best-selling archtop and a rock 'n'roll standard. first introduced in 1961, the casino was just one of several new thinline archtops designed and produced at the company's adopted new factory in kalamazoo, michigan that it shared with one-time competitor and new partner, gibson. the casino was first adopted by keith richards of the rolling stones who used a casino to record the demo for satisfaction at chess records in chicago. howlin'wolf took a casino on his first tour of the uk, appearing on thank your lucky stars. shortly afterwards, john lennon and george harrison bought casinos for the beatles 1966 world tour. featuring dogear p-90t classic pickups and a 5-ply maple body with basswood top bracing.
Specifications:
| Body Shape | Casino |
| Back | Layered Maple |
| Side | Layered Maple |
| Bracing | Spruce Contour Brace |
| Binding | Single ply cream – top, back and fretboard |
| Finish | Worn |
| Neck Material | Mahogany |
| Scale Length | 24.724" |
| Fingerboard Material | Indian Laurel |
| Fingerboard Radius | 12.01" |
| Number Of Frets | 22 |
| Frets | Medium Jumbo |
| Nut Material | Graph Tech NuBone |
| Nut Width | 1.693" |
| Inlays | Trapezoid |
| Joint | Set Neck |
| Hardware Finish | Nickel |
| Tuner Plating | Nickel |
| Bridge | Epiphone LockTone Tune-O-Matic |
| Tailpiece | Diamond Trapeze |
| Tuning Machines | Epiphone Vintage Deluxe |
| Pickguard | Casino with "E" logo, 3-ply |
| Truss Rod Cover | 2-Ply Crescent Bullet with "E" logo |
| Control Knobs | Gold Top Hats with metal inserts and dial pointers |
| Switch Tip | Cream |
| Strap Buttons | 2 – bottom and back of heel |
| Pickup Covers | Nickel Dogear |
| Neck Pickup | Epiphone PRO P-90 |
| Bridge Pickup | Epiphone PRO P-90 |
| Controls | 2 Volume, 2 Tone, CTS Potentiometers |
| Pickup Selector | 3-way Epiphone toggle |
| Output Jack | Epiphone heavy duty 1/4" output jack |
| Strings | .010, .013, .017, .026, .036, .046 |
Reviews:
I love this Casino. I knew I wanted a P-90, and I really wanted a fully hollow body. I wanted to see if I could replicate a I've been agonizing over the purchase for months, looking for every possible solution, and was almost ready to pull the trigger on the Epi USA version, and after MUCH research, finally decided to go with the regular Epiphone. The construction, from everything I read, is excellent, and I knew that if necessary, I could always switch out the pups. Well, I can't say enough about how good this guitar is! I am extremely fussy on setups (I do setups on my own guitars and for other people) and this thing was ready to play right out of the box! I literally didn't touch a thing except to tune it up. I won't even have to dress the frets. I may touch them up just a bit (again, I'm really fussy) but they feel better than most guitars that cost three times as much. It is really beautiful. I love the vintage sunburst. The finish is flawless. Now for the important part – it plays like a dream. The neck profile is extremely comfortable. I can move up and down the neck as fluidly as on any guitar I own. And the sound! I was amazed at how present it is, even before plugging it in. I see this little sweetheart spending a lot of evenings on the couch with me. Soft enough not to overly bother my wife, but again – very present. Plugged in – well lets just say I won't be replacing these pups. It is exactly the sound I was hoping for. I'm no Grant Green, but I can certainly understand why he loved this guitar. Would I recommend it? Heck yeah! Country? Check. Classic rock? Check. Rockabilly, surf, blues and even jazz? Check, check, check, and check.Jess
This thing is easily worth 4 times the price. The build quality is impeccable. The binding is perfectly flush, the finish is beautiful and evenly applied and the intonation was extremely close out of the box (I only had to move the G string saddle back a bit to set it, all the other strings were perfect). The headstock has a nice molded profile to the sides – this is something I haven't seen on other Epiphone guitars. The PRO p90 pickups are fantastic. I have 11 other electrics from an epi 335 to a Gibson Les Paul Traditional to modded teles and strats and I never could quite find that classic clear tone with a thick rich drive when you dig into it that I've been looking for – this Casino has that sound! Every website/listing likes to talk about the Beatles… that comparison doesn't speak to what this guitar is capable of. This is more in line with Gary Clark Jr., The Black Crowes, Jack White and The Allman Brothers Band sounds. Think rich, bluesy rock. It's much cooler than "the Beatles guitar". Plug this sucker into a Vox and you're in business. The C shape neck is very comfortable- it has a flat back with rounded sides. Plus, with the satin finish your hand moves more freely up and down the neck. It's nice to play unplugged too, it's fully hollow so it plays/sounds like a quieter acoustic unplugged. The knobs/pots are really cool looking and work great with no scratching. They have even adjustments – no quick falls after a certain number like you see with others in this price range. They have a cool old school tab to show where you are on the dial (no pictures show this little detail). All in all – super cool vintage vibe, sweet clean tone with a fun roaring bite on the gain – excellent guitar.
Had the money to buy any guitar in the shop. Liked the looks of the SG, worn ebony with rosewood fingerboard and the Gibson speed knobs. Having only played guitars with 9.5 radius, I found the 14 radius was better for bar chords. The craftsmanship is excellent, can find no flaws the body or neck. The truss rod was out of adjustment, considerable back-bow. I fixed that, and set the action low. The intonation was spot on. Frets were polished with no sharp edges. I plan to upgrade the cheap electronics with new pots. As for the pickups, they sound ok. Since I use a modeling amp, not a big issue for me. The nut is a GraphTech synthetic bone. Nice touch for an inexpensive guitar, since i do not like changing them out…too much risk of damage. I have fender Strat and Tele, but have not put this down since purchasing it. Once I upgrade the electronics, this will be a very solid guitar.Jeff
2. Fender Roasted Maple Stratocaster Neck Flat Oval
Product Details:
There’s no denying the allure of a roasted maple neck. resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument’s voice. this genuine fender stratocaster neck is crafted at the ensenada, mexico manufacturing facility. featuring a comfortable "flat oval"-shaped profile and 12"-radius maple fingerboard with 22 jumbo frets, this neck was designed for pure speed. the synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. the perfect way to give your strat authentic fender feel, this replacement neck even sports the famous “spaghetti” logo on the headstock.
Specifications:
| Product Dimensions | 29.5 x 7.4 x 3.2 inches |
| Country of Origin | Mexico |
| Is Discontinued By Manufacturer | No |
| Back Material | Maple Wood |
| Color Name | Pau Ferro |
| Fretboard Material | Maple Wood |
| String Material | Nickel Steel |
| Top Material | Maple Wood |
| Neck Material Type | Maple |
| Number of Strings | 6 |
| Guitar Bridge System | Fixed |
| Fretboard Material Type | Maple Wood |
| String Material Type | Nickel Steel |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
3. Fender Vintera Mod '70's Stratocaster Roasted Maple Neck
Product Details:
There's no denying the allure of a roasted maple neck. resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument's voice. this genuine fender stratocaster neck is crafted at fender's ensenada, mexico manufacturing facility. featuring an 'early 70's c' neck profile and 9.5"-radius maple fingerboard with 21 medium jumbo frets, for modern playing feel. although this neck features a 3-bolt design typical of '70s strats, only the bottom two neck mounting pilot holes are available, giving you the flexibility to use this neck with many different guitar bodies. the synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. the perfect way to give your strat authentic fender feel, this replacement neck even sports the cbs era logo and a bullet truss rod on the larger headstock. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
4. Fender Roasted Maple Stratocaster Neck Flat Oval Pau Ferro
Product Details:
There no denying the allure of a roasted maple neck. resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument voice. this genuine fender stratocaster neck is crafted at our ensenada, mexico manufacturing facility. featuring a comfortable flat oval shaped profile and 12 radius pau ferro fingerboard with 22 jumbo frets, this neck was designed for pure speed. the synthetic bone nut is pre slotted with pilot grooves for accurate spacing when filing the final string slots. the perfect way to give your stratauthentic fender feel, this replacement neck even sports our famous spaghetti logo on the headstock. this replacement neck is for a fender or squierby fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
| Product Dimensions | 29.5 x 7.4 x 3.2 inches |
| Country of Origin | Mexico |
| Is Discontinued By Manufacturer | No |
| Back Material | Maple Wood |
| Color Name | Brown |
| Fretboard Material | Morado |
| String Material | Nickel Steel |
| Top Material | Maple Wood |
| Neck Material Type | Maple |
| Number of Strings | 6 |
| Guitar Bridge System | Fixed |
| Fretboard Material Type | Morado |
| String Material Type | Nickel Steel |
| Hand Orientation | Right |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
5. Fender Roasted Maple Telecaster Neck
Product Details:
There’s no denying the allure of a roasted maple neck. resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument’s voice. this genuine fender telecaster neck is crafted at our ensenada, mexico manufacturing facility. featuring a comfortable "flat oval"-shaped profile and 12"-radius maple fingerboard with 22 jumbo frets, this neck was designed for pure speed. the synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. the perfect way to give your tele authentic fender feel, this replacement neck even sports our famous “spaghetti” logo on the headstock.
Specifications:
| Product Dimensions | 29.8 x 7.4 x 3.2 inches |
| Country of Origin | Mexico |
| Is Discontinued By Manufacturer | No |
| Back Material | Maple Wood |
| Color Name | Pau Ferro |
| Fretboard Material | Maple Wood |
| String Material | Nickel Steel |
| Top Material | Maple Wood |
| Neck Material Type | Maple |
| Number of Strings | 6 |
| Guitar Bridge System | Fixed |
| Fretboard Material Type | Maple Wood |
| String Material Type | Nickel Steel |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
6. Fender 1951 Telecaster Neck
Product Details:
This official fender 1951 telecaster fat u maple neck has a vintage style substantial u shaped profile, 9.5" fretboard radius with 21, 6105 narrow/tall frets and a gloss urethane finish for smooth playability. the synthetic bone nut is pre-slotted with 'pilot' string slots to make spacing a breeze when performing the final string slot filing, the neck has 8.8 mm tuner bushing holes drilled on the headstock face for vintage style tuners with press fit bushings (some reaming of the hole may be required for a perfect press fit) and the truss rod adjustment nut is at the heel. this replacement neck is the perfect way to give your tele a classic 1951 style playing feel and fits fender or squier flat/square heel end telecaster guitars. some fret levelling/dressing and polishing may be required and minor woodwork to fit the neck to the body. please note the photo displayed is an example image only and the wood grain and serial number will differ on the neck you receive.
Specifications:
| Style | Vintage |
| Neck Shape | 1951 "U" |
| Fingerboard Material | Maple |
| Neck Material | Maple |
| Nut Material | Synthetic Bone |
| Position Inlays | Black Dot |
| Neck Finish | Gloss Urethane |
| Fingerboard Radius | 9.5" (241mm) |
| Scale Length | 25.5" (64.77cm) |
| Nut Width | 1.6875" (42.86mm) |
| Number of Frets | 21 |
| Fret Size | Narrow Tall (6105) |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
7. Fender Vintera Mod '60's Telecaster Neck Roasted Maple
Product Details:
There's no denying the allure of a roasted maple neck. resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument's voice. this genuine fender telecaster neck is crafted at our ensenada, mexico manufacturing facility. featuring a "60's c" neck profile and 9.5"-radius maple fingerboard with 21 medium jumbo frets, for modern playing feel. the synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. the perfect way to give your strat authentic fender feel, this replacement neck even sports our famous "spaghetti" logo on the headstock. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
8. Fender Stratocaster Neck, 21 Medium Jumbo Frets Maple
Product Details:
Genuine fender stratocaster guitar maple neck features a comfortable "modern c" profile and 9.5"-radius rosewood or maple fingerboard with 21 medium jumbo frets. also includes standard truss rod and pre-slotted synthetic bone nut. tinted satin urethane fi – fingerboard: maple – number of frets: 21fret size: medium jumbo – neck shape: modern "c"neck material: maple – neck finish: satin urethane on back of neck, gloss on face of headstock – fingerboard radius: 9.5" (241mm)scale length: 25.5" (648mm)nut material: synthetic bone (melamine)nut width: 1.650" (42mm)position inlays: white dot3/16" truss rod adjustment nut (at headstock)6 pre-drilled tuning machine holes with 2-guide pin holes for each tuning machine – each neck is serialized and stamped during quality inspection – walnut "skunk" stripe on back of neck – fender logo with "original contour body" decal
Specifications:
| Style | Modern |
| Neck Shape | Modern "C" |
| Tuner Mounting Configuration | 2-Guide Pin |
| Fingerboard Material | Maple |
| Neck Material | Maple |
| Nut Material | Synthetic Bone |
| Position Inlays | Black Dot |
| Truss Rod Nut | 3/16" Hex Adjustment |
| Truss Rod | Standard |
| Fingerboard Radius | 9.5" (241 mm) |
| Scale Length | 25.5" (648 mm) |
| Nut Width | 1.650" (42 mm) |
| Number of Frets | 21 |
| Fret Size | Medium Jumbo |
| Headstock Thickness | .540" (13.71 mm) |
| Peg Hole Diameter | .397" (10.08 mm) |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
9. Fender Deluxe Series Telecaster Neck, 22 Narrow Tall Frets, 12" Radius, Maple Fingerboard
Product Details:
Crafted at fender's ensenada, mexico manufacturing facility, this genuine fender telecaster deluxe guitar neck features a comfortable "c"-shaped profile and 12"-radius maple fingerboard with 22 narrow tall frets and black pearloid inlays.the synthetic bone nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin polyurethane finish on the back offers smooth playability. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
10. Fender Player Series Stratocaster Neck, 22 Medium-Jumbo Frets, 9.5" Radius, Pau Ferro
Product Details:
Crafted in the ensenada, mexico, manufacturing facility, this genuine fender player series replacement guitar neck features a comfortable "modern c" profile and 9.5"-radius fingerboard with 22 medium jumbo frets. the nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. for true fender authenticity, it's also serialized and stamped, with a genuine headstock decal. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
| Fingerboard Material | Pau Ferro |
| Fingerboard Radius | 9.5" (241 mm) |
| Neck Material | Maple |
| Neck Mounting | 4-Bolt |
| Neck Shape | Modern "C" |
| Nut Material | Synthetic Bone |
| Nut Width | 1.650" (42 mm) |
| Position Inlays | White Dot |
| Side Dots | White |
| String Nut | Synthetic Bone |
| Truss Rod | Standard |
| Truss Rod Nut | 3/16" Hex Adjustment |
| Tuner Mounting Config | Dual Guide Pin |
| Number of Frets | 22 |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
11. Fender Stratocaster Left-Hand C Neck With Maple Fingerboard (Open Box)
Product Details:
Genuine replacement neck crafted at fender's ensenada, mexico, manufacturing facility, this genuine left-hand fender stratocaster guitar maple neck features a comfortable modern c profile and 9.5-radius rosewood fingerboard with 21 medium jumbo frets the nut is pre-slotted with pilot string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. for true fender authenticity, it's also serialized and stamped, with genuine original contour body headstock decal. this replacement neck is for a fender or squier by fender guitar.
Specifications:
| Style | Modern |
| Neck Shape | Modern "C" |
| Tuner Mounting Configuration | 2-Guide Pin |
| Fingerboard Material | Maple |
| Neck Material | Maple |
| Nut Material | Synthetic Bone |
| Position Inlays | Black Dot |
| Truss Rod Nut | 3/16" Hex Adjustment |
| Truss Rod | Standard |
| Radius | 9.5" (241 mm) |
| Scale Length | 25.5" (648 mm) |
| Nut Width | 1.650" (42 mm) |
| Number of Frets | 21 |
| Fret Size | Medium Jumbo |
| Headstock Thickness | .540" (13.71 mm) |
| Peg Hole Diameter | .397" (10.08 mm) |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
12. Genuine Fender Standard Series Stratocaster Left Handed Neck Pau Ferro
Product Details:
This fender strat neck is an open-box item, never installed on a guitar and still looking in excellent condition. crafted at fender's ensenada, mexico manufacturing facility, this genuine fender stratocaster neck features a comfortable "c"-shaped profile and 9.5"-radius pau ferro fingerboard with 21 medium jumbo frets. the synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. this replacement neck is the perfect way to give fender's strat authentic fender feel. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
| Compatibility | Standard Series Stratocaster LH Guitar |
| Neck Shape | Modern "C" |
| Tuner Mounting Config | Modern 2-Peg |
| Fingerboard Material | Pau Ferro |
| Neck Material | Maple |
| Nut Material | Synthetic Bone |
| Position Inlays | White Dots |
| Neck Finish | Satin Urethane |
| Truss Rod Nut | 3/16" Hex Adjustment |
| Truss Rod | Standard |
| Fingerboard Radius | 9.5" (24.13cm) |
| Scale Length | 25.5" (64.77cm) |
| Nut Width | 1.65" (4.19cm) |
| Number of Frets | 21 |
| Fret Size | Medium Jumbo |
| Headstock Thickness | 0.540" (13.72mm) |
| Peg Hole Diameter | 0.397" (10.08mm) |
| Dimensions | 3.4 x 7 x 29.75" (8.64 x 17.78 x 75.57cm) |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
13. Fender Vintera Mod '50's Telecaster Roasted Maple Neck
Product Details:
There's no denying the allure of a roasted maple neck. resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument's voice. this genuine fender telecaster neck is crafted at our ensenada, mexico manufacturing facility. featuring a vintage style "soft v" neck profile and 9.5"-radius maple fingerboard with 21 medium jumbo frets, for modern playing feel. the synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. the perfect way to give your strat authentic fender feel, this replacement neck even sports our famous "spaghetti" logo on the headstock. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
| Neck Material | Roasted Maple |
| Neck Shape | Soft “V” |
| Fingerboard Radius | 9.5” (241 mm) |
| Scale Length | 25.5” (648 mm) |
| Number of Frets | 21 |
| Fret Size | Medium Jumbo |
| Nut Material | Synthetic Bone |
| Nut Width | 1.650” (42 mm) |
| Truss Rod | Vintage-Style Butt Adjust |
| Truss Rod Nut | Vintage-Style Slotted |
| Tuner Mounting | Vintage style 2 screw |
| Peg Hole Diameter | .358” (9.09 mm) |
| Headstock Thickness | .540” (13.71 mm) |
| Neck Mounting | 4-Bolt |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
14. Fender Player Series Stratocaster Reverse Headstock Neck, 22 Medium-Jumbo Frets, 9.5", Modern C, Pau Ferro
Product Details:
Crafted in the ensenada, mexico, manufacturing facility, this genuine fender player series replacement guitar neck features a comfortable "modern c" profile and 9.5"-radius fingerboard with 22 medium jumbo frets. the nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. for true fender authenticity, it's also serialized and stamped, with a genuine headstock decal. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
| Fingerboard Radius | 9.5" (241 mm) |
| Refinement Fingerboard Radius | Modern |
| Fret Size | Medium Jumbo |
| Neck Material | Maple |
| Refinement Neck Material | Maple |
| Neck Shape | Modern "C" |
| Refinement Neck Shape | C Shape |
| Number of Frets | 22 |
| Nut Material | Synthetic Bone |
| Scale Length | 25.5" (648 mm) |
| Truss Rod | Standard |
| Neck Mounting | 4-Bolt |
| Tuner Mounting Config | Dual Guide Pin |
| Instrument Type | Stratocaster |
| Peg Hole Diameter | 397" (10.08 mm) |
| Headstock Thickness | 540” (13.71 mm) |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
15. Fender American Professional Ii Jazzmaster Neck, 22 Narrow-Tall Frets, 9.5" Radius, Rosewood
Product Details:
Crafted in the same facility as our u.s.-made instruments, the american professional ii jazzmaster neck draws from more than sixty years of innovation, inspiration and evolution to meet the demands of today's working player. our popular deep c neck now sports smooth rolled fingerboard edges and a super-natural satin finish that provides a supremely comfortable feel. other features include a 9.5-radius rosewood fingerboard, bone nut and 22 narrow-tall frets for easy bending. the neck pocket has 4 offset pre-drilled pilot holes so if it is being installed on a standard body, a fifth pilot hole will need to be drilled. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
| Fingerboard Material | Rosewood |
| Fingerboard Radius | 9.5" (241 mm) |
| Neck Material | Maple |
| Neck Mounting | 4-Bolt Offset |
| Neck Shape | Deep "C" |
| Number of Frets | 22 |
| Nut Material | Bone |
| Nut Width | 1.685" (42.8 mm) |
| Position Inlays | White Dot |
| Side Dots | White |
| String Nut | Bone |
| Truss Rod | Bi-Flex |
| Truss Rod Nut | 1/8" Hex Adjustment |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
16. Fender Player Series Telecaster Reverse Headstock Neck, 22 Medium-Jumbo Frets, 9.5" Radius, Modern C, Pau Ferro
Product Details:
Crafted in the ensenada, mexico, manufacturing facility, this genuine fender player series replacement guitar neck features a comfortable "modern c" profile and 9.5"-radius fingerboard with 22 medium jumbo frets. the nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. for true fender authenticity, it's also serialized and stamped, with a genuine headstock decal. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
| Fingerboard Radius | 9.5" (241 mm) |
| Refinement Fingerboard Radius | Modern |
| Fret Size | Medium Jumbo |
| Neck Material | Maple |
| Refinement Neck Material | Maple |
| Neck Shape | Modern "C" |
| Refinement Neck Shape | C Shape |
| Number of Frets | 22 |
| Nut Material | Synthetic Bone |
| Scale Length | 25.5" (648 mm) |
| Truss Rod | Standard |
| Neck Mounting | 4-Bolt |
| Tuner Mounting Config | Dual Guide Pin |
| Instrument Type | Stratocaster |
| Peg Hole Diameter | 397" (10.08 mm) |
| Headstock Thickness | 540” (13.71 mm) |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
17. Fender Roasted Maple Telecaster Neck Pau Ferro Oval Shape
Product Details:
It's next level. the fender roasted maple telecaster neck is perfect if you are building or customising your guitar. offering that classic, fresh, inspiring telecaster feel, it will give you untold satisfaction whenever you pick up your instrument. the roasted maple not only looks good – it sounds exceptional. boasting a brilliant, bright resonance, it will help each note you play to pop out with vigour. adorned with a pau ferro fretboard, you'll find the surface smooth and sweet, with a slightly softer resonance to balance out the brightness of the maple – it's also incredibly nice to play on. moving between frets will feel natural and fluid, so you'll love the way this neck opens up your playing. with 22 high quality jumbo frets, those string bends will feel lusciously easy to execute, so you'll be able to improvise and write music at will. experience the neck you've always dreamed of with this finely crafted, exceptional model.
Specifications:
| Product Dimensions | 29.5 x 7.4 x 3.2 inches |
| Country of Origin | Mexico |
| Is Discontinued By Manufacturer | No |
| Back Material | Maple Wood |
| Color Name | Brown |
| Fretboard Material | Maple Wood |
| String Material | Nickel Steel |
| Top Material | Maple Wood |
| Neck Material Type | Maple |
| Number of Strings | 6 |
| Guitar Bridge System | Fixed |
| Fretboard Material Type | Maple Wood |
| String Material Type | Nickel Steel |
| Hand Orientation | Right |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
18. Fender Player Series Telecaster Neck, 22 Medium-Jumbo Frets, 9.5" Radius, Pau Ferro
Product Details:
Crafted at our ensenada, mexico, manufacturing facility, this genuine fender player series stratocaster guitar neck features a comfortable "modern c" profile and 9.5"-radius maple or pau ferro fingerboard with 22 medium jumbo frets. the nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. for true fender authenticity, it's also serialized and stamped, with genuine "original contour body" headstock decal. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
| Fingerboard Radius | 9.5" (241 mm) |
| Refinement Fingerboard Radius | Modern |
| Fret Size | Medium Jumbo |
| Neck Material | Maple |
| Refinement Neck Material | Maple |
| Neck Shape | Modern "C" |
| Refinement Neck Shape | C Shape |
| Number of Frets | 22 |
| Nut Material | Synthetic Bone |
| Scale Length | 25.5" (648 mm) |
| Truss Rod | Standard |
| Neck Mounting | 4-Bolt |
| Tuner Mounting Config | Dual Guide Pin |
| Instrument Type | Telecaster |
| Peg Hole Diameter | 397" (10.08 mm) |
| Headstock Thickness | 540” (13.71 mm) |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
19. Fender Stratocaster Left-Hand Neck -21 Fret – Maple Fingerboard
Product Details:
Crafted at our ensenada, mexico, manufacturing facility, this genuine left-hand fender stratocaster" guitar maple neck features a comfortable "modern c" profile and 9.5"-radius fingerboard with 21 medium jumbo frets. the nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. for true fender authenticity, it's also serialized and stamped, with genuine "original contour body" headstock decal. this replacement neck is for a fender or squier by fender guitar.
Specifications:
| Style | Modern |
| Neck Shape | Modern "C" |
| Tuner Mounting Configuration | 2-Guide Pin |
| Fingerboard Material | Maple |
| Neck Material | Maple |
| Nut Material | Synthetic Bone |
| Position Inlays | Black Dot |
| Truss Rod Nut | 3/16" Hex Adjustment |
| Truss Rod | Standard |
| Radius | 9.5" (241 mm) |
| Scale Length | 25.5" (648 mm) |
| Nut Width | 1.650" (42 mm) |
| Number of Frets | 21 |
| Fret Size | Medium Jumbo |
| Headstock Thickness | .540" (13.71 mm) |
| Peg Hole Diameter | .397" (10.08 mm) |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
20. Fender American Professional Ii Stratocaster Neck, 22 Narrow-Tall Frets, 9.5" Radius, Maple
Product Details:
Crafted in the same facility as fender u.s.-made instruments, the american professional ii stratocaster neck draws from more than sixty years of innovation, inspiration and evolution to meet the demands of today s working player. the popular deep c neck sports smooth rolled fingerboard edges and a super-natural satin finish that provides a supremely comfortable feel. other features include a 9.5" radius fingerboard, bone nut and 22 narrow-tall frets for easy bending. the neck pocket has 4 offset pre-drilled pilot holes so if it is being installed on a standard body, a fifth pilot hole will need to be drilled. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
| Fingerboard Material | Maple |
| Neck Material | Maple |
| Neck Shape | Deep “C” |
| Fingerboard Radius | 9.5” (241 mm) |
| Scale Length | 25.5” (648 mm) |
| Number of Frets | 22 |
| Fret Size | Narrow Tall |
| Nut Material | Bone |
| Nut Width | 1.685” (42.8 mm) |
| Truss Rod | Bi-Flex |
| Truss Rod Nut | 1/8” Hex Adjustment |
| Tuner Mounting | Dual Guide Pin |
| Peg Hole Diameter | .404” (10.26 mm) |
| Headstock Thick-ness | .540” (13.71 mm) |
| Neck Mounting | 4-Bolt Offset |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
