Are you looking for the Metal Driver Bass Guitar? If so, you’ve come to the right place.
Choosing the Metal Driver Bass Guitar can be difficult as there are so many considerations, such as IRIN, Custom Shop, Glarry, Dean, Yamaha, Godin, Hamer. We have done a lot of research to find the top 20 Metal Driver Bass Guitar available.
The average cost is $333.14. Sold comparable range in price from a low of $39.98 to a high of $1949.99.
Based on the research we did, we think Dean V Metalman Bass – Classic Black is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Metal Driver Bass Guitar (20 Sellers)
Product Image | Product Name | Features | Check Price |
---|---|---|---|
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|||
|
|
||
|
|
||
|
|||
|
|||
|
|||
|
|||
|
|||
|
|||
|
|
||
|
|
||
|
|||
|
|
||
|
|||
|
|
$249.00
4.7
Reviewers Noted:
Good sound quality . Lightweight . Attractive . Durability . Craftsmanship
Features:
- Dean v metal man
- Sounds great, plays well
- Doesn’t have the original knobs also missing the knob on the tone peg ( still works)
$1249.99$729.99
4.6
Reviewers Noted:
Good sound quality . Attractive . Well made . Durability . Weight
Features:
- Contoured ply maple body
- 30.75" canadian hard maple set neck with 15" resinator fingerboard and hagstrom pearl block position marks; h-expander trussrod
- Dual dyna rail viking bass neck and bridge pickups; 6-way rotary pickup selector; dual volume and tone controls
Reviewers Noted:
Distortion . Sound quality . Power
Features:
- Frequency response of 100 khz to 11.3 khz helps produce loud and crisp audio
- The 4 ohms impedance amplifies the input signal for a quality output
- Its 97 db sensitivity helps reduce noise distortion for clear sound
Reviewers Noted:
Sound quality
Features:
- 4 inputs and 2 channels can be blended to produce an expanded array of authentic vintage tube tones.
- Solid finger-jointed pine cabinet and 4-10" jensen p-10r, 8 ohm speakers with alnico magnets contribute to a great vintage tone.
- Internal bias pot makes it easier to experiment with various output tubes.
$470.99
4.8
Reviewers Noted:
Quality build . Visual appeal . Sound quality . Power
Features:
- Make sure this fits by entering your model number.
- The laney rb2 bass amplifier is a 30w solid state amplifier giving plenty of power.
- Coupled with a 10 inch custom hh driver and hf horn the full range of your bass can be heard with clarity and punch.
$39.98
5.0
Features:
- 94db sensitivity and 200 watt continuous power handling allows incredible output
- 2" voice coil and 30 oz ferrite magnet with vented pole-piece
- Lightweight paper cone and cloth surround
$249.00
4.4
Reviewers Noted:
Good sound quality . Attractive . Weight . Well made . Durability
Features:
- Low profile maple neck
- Rosewood fingerboard
- Bolt-on construction
$159.99$149.99
4.4
Reviewers Noted:
Good sound quality . Attractive . Well made . Durability . Lightweight
Features:
- Though it looks quite similar to the ordinary guitar, it actually is quite different from that one when it comes to function. compared with guitar, it features thicker strings and…
$375.00
Features:
- Great sounding and 100% operational. would be great refinished. beautiful dean neck. a couple super light scratches on the headstock, i haven't tried to buff these out yet. weighs 9.14….
$159.99
4.9
Features:
- Frequency range of 40 hz – 2.2 khz delivers a heart-thumping bass quality
- Pressed steel basket adds to the durability of this woofer
- The 95 db sensitivity offers a crisp and clear audio output with minimum distortion
$44.98
5.0
Features:
- 94db sensitivity and 200 watt continuous power handling allows incredible output
- 2" voice coil and 40 oz ferrite magnet with vented pole-piece
- Lightweight paper cone and cloth surround
$219.00
4.9
Features:
- Lightweight neodymium magnet that delivers full body tones
- Extended low end and greater linear excursion
- Ideal for the high-powered rock performance
$350.10
Features:
- Find hot sell electric bass guitar metal black color 6 strings free shipping on ebay in the category musical instruments & gear>guitars & basses>electric guitars….
$154.99
4.7
Features:
- Power rating: 300 w
- Impedance: 8 ohm
- Frequency response: 47 hz to 3 khz response
$134.99
4.0
Features:
- Copper voice coil on polyimide former
- Neodymium magnet with non-vented core
- Pressed steel basket
$59.98
4.3
Features:
- 95db sensitivity and 350 watt continuous power handling allows incredible output
- 2.5" voice coil and 40 oz ferrite magnet with vented pole-piece
- Lightweight paper cone and cloth surround
$119.99
4.8
Reviewers Noted:
Attractive . Lightweight . Good sound quality . Well made . Durability
Features:
- Introductions the glarry burning fire electric bass guitar full size 4 string cord wrench tool is a gorgeous, high-performance electric guitar that wont disappoint you. constructed with a lightweight contoured…
$209.00
Features:
- Reduce costs with factory direct sourcing. low moq, oem/odm available. source now! traditional sourcing brought online. find quality products & contact verified suppliers!…
$771.80
Features:
- Hello, i will support your music life from japan. i will do my utmost for the service you satisfy. item description md metal driver md-ss / g-3 the brand "md…
1. Dean V Metalman Bass – Classic Black
Product Details:
Wish you could have a bass dedicated to metal? the dean metalman v bass provides players with an aggressive-looking design and incredibly punchy tones that will propel you down the path of metal. despite its vicious aesthetic, the metalman bass' body is surprisingly comfortable to play. and the smooth, maple neck lets you effortlessly move across the entirety of the walnut fingerboard. so you can showcase stunning style and seamless performance on stage. all-out metal crunch. a single dmt soapbar pickup is fixed right next to the bridge, giving you an incredibly powerful low-end response with a crushing punch. but don't be fooled by the single-pickup design. because that's all you'll need to kick out those relentlessly powerful bass riffs. because this is a bass crafted for ruthless performance. and the dean metalman v bass excels in every aspect required for a metal machine.
Specifications:
Instrument Type | Bass guitar – electric |
Features | Dual action truss rod, sealed die-cast tuners, black dome knobs, V-shaped headstock |
Shape | V-shaped |
Material | Basswood |
Neck Material | Maple |
Scale Length | 34" (863 mm) |
Number of Frets | 22 |
Neck Joint | Bolt-on neck |
Neck Shape | C shape |
Fingerboard | 16 in – rosewood |
Fingerboard Inlay | Pearl dots |
Nut | 1.5 in – plastic |
Model | Humbucker |
Controls | Volume, tone |
Bridge Model | DMT Design Soapbar |
Bridge Material | Die-cast alloy |
Hardware Plating | Black |
Number of Strings | 4 |
Gauge | .045 – .100 |
Color | Classic black |
Warranty Details | Limited lifetime |
Reviews:
Great service Great products received my products on time and no damages great guitar great case
This bass is amazing, it doesn't die out like a lot of other basses do. just like a-lox said i haven't had mine in a case since I've had it either and it has even taken a couple falls (other ppl not watching where they were walking) and it still works like it did the day i got it. only problem could be that since it's a V u can't really sit and play unless u put your leg between the two legs of the V but i prefer to stand anyways. i recomend this o any1.Briggsy80
2. Hagstrom Viking Bass Black
Product Details:
The hagstrom viking bass is a reconstruction of the classic concord bass from yesteryear. keeping the soul and look of this retro classic, however providing the functionality and versatility to satisfy the modern day player as well. the pickups on this bass are "vintage voiced", however a six position rotary switch has been placed in the lower horn to provide the player with a pallet of different voices. this bass provides a warm vintage tone, with an amazing sustain thanks to the h-expander truss rod. this medium scale length bass will please the performing musicians in thought to the lower weight of the bass, but also continue to impress due to the multitude of different tonal variations to suit many playing styles.gigbag.
Specifications:
Wood | Maple |
Neck joint | Set-in |
Scale length | 30.75" |
Truss rod | Standard |
Pickup configuration | HH |
Neck | Proprietary Humbucker |
Bridge | Proprietary Humbucker |
Pickup switch | 6-way |
Radius | 15" |
Fret size | Medium-jumbo |
Number of frets | 21 |
Inlays | Block |
Nut material/width | GraphTech/1.5" |
Body Type | Semi-Hollow |
Body wood | Maple |
Bridge/Tailpiece | Long Travel Tune-O-Matic/Trapeze |
Tuning machines | Die-cast Sealed |
Number of strings | 4 String |
Country of origin | China |
Orientation | Right-Handed |
Reviews:
I bought mine new and it's everything positive others say about it. Don't know what bobz429 is talking about. Obviously he has a modified model. Hardware is first rate with a Hagstrom designed P90 single coil at the neck and classic '58C humbucker at the bridge (Hagstrom winds their own pickups). It's a joy to play, very clean factory pups, beautiful finish, very well crafted and flawless. Rivals guitars up to 3 times the cost in my opinion. The Hagstrom composite Resinator fret board is fast and has good sustain. This guitar can be used for jazz with very clean articulation and voicing, moan the blues, fit right into classic or grunge rock and growl with the best of 'em throughout it's entire range. The ringing clarity is stunning! It's a lot of bang for your buck, and lighter than you'd think for a guitar with a 28" scale. A "tad" neck-heavy balance wise, but once you play it and realize it's potential from mild to wild, this is easily overlooked and by "no means" a deal breaker. It has 5 star ratings across the board for a reason. It's simply that good! This is a players guitar and one I'll keep the rest of my life. It will surprise and please you once you plug it in. This is an amazing baritone. Plug it in, crank it up, and jam 'til the cows come home! If your in the marketfor a baritone guitar, the Hagstrom Viking Deluxe is very hard to beat! I personally don't think any others in it's price rang hold a candle to it. Highly recommended. Enjoy! Edit: Was surprised to see I wasn't listed as a verified purchaser (don't know how that works). Oh well, I assure you I own this guitar purchased from SoundsCheapMusic on eBay out of Pleasant Hill, MO on April 22, 2015… in the Cosmic Black Burst finish. All the same, you won't be disappointed. 😉honorable1-us
With more than 15yrs. of experience with various Hagstrom guitars and over 40yrs. of playing and performing, this instrument and review was an unexpected and a very pleasant surprise. I will acknowledge that I was prompted to pull the trigger on the purchase in no small part because of a couple of reviews here on MFI, one by a fellow who is an American musician living in Sweden. From what I was able to glean from a collection of YouTube videos from past NAMM shows, it looks like the Viking DLX 12 made it's debut about 2016, and has had at least one major update since, with the most notable being larger, but traditional-shaped F-holes on the top, fully creme bound, of course. I very much agree with the opinion previously expressed about there being a major advantage for Hagstrom because of their sourcing all woods(primarily Canada)and all hardware and electronics, leaving their factory contractors in China to concentrate on building the best looking/sounding instrument possible. I would place current Hagstrom product on a par with anything from the Park factories in Korea, and nearly on par with some of the older product that came from Matsumoko in Japan. IMHO, and as pointed out by a previous reviewer, the only real contenders in this narrow category of instrument are the hollowbody Ric 300 Series, and the current Gretsch Electromatic 5422-12, both of which are 2-3X the cost of a new Viking DLX 12. Pickups are clear voiced but fairly hot, and the Resonator fretboard feels great and works with the overall timbre of a maple bodied guitar. The bookmatched flame maple body sides, top, and back are a sight to behold; laminated but beautiful. The most playable and comfortable neck I have EVER put in my hand for a 12-string; a profile similar to an early 60's Gibson or modern ESP being "thin", but with a 15" radius and a 45mm black Tusq nut. Perfect for chording and rhythm, but enough room between string pairs for either finger or flatpicking with precision. Get ItArch69er
It caught my eye hanging in my local Guitar Center in Goodlettsville, TN, which has a terrific staff btw. I asked to try it and was quite impressed with the overall build quality and set-up. Simply perfect; action, intonation, fret dressing, etc. It didn't need a thing! Thought about it overnight and returned the next day to buy it.Alan
3. Ds18 Prox64bmslim Pro-X Series Slim 6.5" Midrange Bullet Loudspeaker 4 Ohm
Product Details:
During the focused r&d period of perfecting the pro-x line, ds18 identified the opportunity to spawn off another line since there was a division amongst competition audiophiles and concert/"voceteo" audiophiles. therefore, ds18 created the pro audio line, which features a wide variety of midranges that produce concert-like sounds that will knock the wind out of you! the pro m series was designed to give you amazingly loud volume for your midrange frequencies. large ferrite magnet that helps the cca coil take gobs of power punching out pure pro-audio vocals at the highest volume on demand. durable ds18 design that will not only deliver amazing sound quality and volume but have great durability throughout the years to come with high strength cloth surrounds and paper pressed cones.
Specifications:
Sensitivity | 97 dB |
Frequency Response | 100 kHz -11.3 kHz |
Impedance | 4 ohms |
Basket Metal | Steel |
Bullet Metal | Aluminum |
Reviews:
I researched these quite a bit because I wanted to replace my truck door speakers with quality 6.5s without breaking the bank. I am dumfounded of the quality crisp clean sound. These things are incredible, I bought another pair two days later for my wifes Harley Street Glide.badblkglide
I originally bought four, it took me almost two months to get them in and two didn't work from the factory, and I got the run around from DS18 so I drove around with two working until last week. I finally brokendown and bought two more. They crank, I give them an A+. But due to customer service, I'm going all Skar amps instead of DS18.Jonathan S.
4. Fender '59 Bassman Ltd Reissue 45-Watt 4×10" Guitar Combo
Product Details:
The 50s fender bassman was the pro bassists answer to amplifying a great new invention: the fender precision bassð guitar. this powerful 50-watt rig could easily compete with the common instrumentation of the day: horns, piano, four-piece drum kit with calfskin heads, and maybe even an electric guitar through a nice, new 10-watt amp! by the 60s and 70s, the original all-tube tweed 4×10 bassman was popular with rock, country and blues guitarists as a reliably great-sounding and easy-to-use guitar amp. even some emerging british amp designers of the day copied its circuitry for use in their most celebrated designs.in the 1990s, fender released an affordable reissue of the now-collectible 59 bassman amplifier to massive acclaim. many guitarists, tired of experimenting with preamps, equalizers, and effects racks, rediscovered the simple pleasure of plugging into a fender tube amp. the bassmans wide stage coverage, touch-sensitive dynamics and full-frequency swirl make it the perfect vehicle for building a great tone with almost any guitar or effect. the reissue bassman continues to be a staple of the fender guitar amp line to this day. the new 59 bassmanð ltd is enhanced with: genuine lacquered tweed covering. finger-joined pine cabinet for woody, resonant tone. original spec 5ar4 rectifier tube for natural compression when playing hard. internal bias pot makes it easier to experiment with various output tubes. two gt-6l6 groove tube output tubes. three improved 12ax7 preamp tubes. fitted cover.
Specifications:
Reviews:
I am one of those guitarists who does not use distortion; mainly playing 50's, 60's, and country. Having done my research the '59 Bassman seemed to be the ideal amp for me with it's clean and full-sounding tones when used with my Fender and Gretsch guitars. Previously, I had used modern-spec amps and simply ignored the high-gain options, but they usually sound too mellow and a bit muddy when used clean, presumably so that when switched to distortion mode, they aren't too "fizzy" sounding. This amp is hands down the best amp I have ever used; no frills, just Normal and Bright channels with common bass, mid, treble and presence controls. Good for humbucker-equipped guitars, too: simply add pedals if you must, but your starting point will always be good tone, which puts this amp ahead of most others. Higher volume settings are likely to induce a little overload (think early Kinks hits), but it all sounds natural and not contrived or OTT.Reviewed by Andertons Music Co.
This is well known as a preferred amp for Lap Steel and Pedal Steel players, and that's why I bought it primarily. Also for Baritone Guitar (B to B tuning). SO no surprise that it excels on those duties. The big surprise was that this is now my preferred amp for P-Bass with Flatwound strings, vs. my modern Mesa bass amp. Perfect tonal balance, versatile across all playing styles, warm, and plenty of headroom (I only turn it up to 3 at small club gigs). It also excels on Hollow Body Guitars and Telecasters, giving a very even sound across the registers, with warmth, depth, openness, and room for expression. The only thing I don't like it on is Strats.mhschmieder
Excellent fidelity. Clean up to output saturation. Great low-end.RL
5. Laney Richter Series – Rb2 – Bass Guitar Combo Amp – 30w – 10 Inch Woofer And Hf Horn
Product Details:
Specifications:
dimensions | 45.7 x 33 x 43.2 cm |
Reviews:
Perfect for home practice, louder than I was expectingReviewed by Andertons Music Co.
Massive upgrade on small practice amp, but small enough for home use, where 'lean back' position is perfect. Low end is thick, tweakable mids very handy and DI and FX connections provide good versatility. Can't wait to crank it up properly. Seems very well built and sturdy, and maybe a minor point, but the matt black knobs mean you can always see what they're pointing at, rather than those shiny chrome ones.Reviewed by Andertons Music Co.
Surprisingly loud for the nominal power rating with good tone. DI works well with minimal noise and no perceptible hum on standby from the amp or the DI so easy to work with in church context. Physically easy to maneuver with top and side handles. Very happy so far.Reviewed by Andertons Music Co.
6. Dayton Audio Mb620-8 6-1/2" Professional High Power Midbass Driver 8 Ohm
Product Details:
Built for high impact and low distortion, the mb620-8 6-1/2” midbass is a great choice for use in dynamic, high output 2-way and 3-way designs. with a damped paper cone, treated cloth spider, and powerful ferrite motor these drivers will deliver incredible clarity and detail even when pushed to extreme spl levels. suitable for use in professional speakers, studio monitors, and even car audio systems, these are incredibly flexible mid-bass drivers. 94db sensitivity and 200 watt continuous power handling allows incredible output 2” voice coil and 30 oz ferrite magnet with vented pole-piece lightweight paper cone and cloth surround wide 100hz-7khz usable frequency response great for 2 or 3-way pro audio, car, or home hi-fi systems excellent choice for use in instrument applications dayton audio mb620-8 6.5" professional high power midbass driver 8 ohm dayton audio’s mb620-8 6-1/2” professional mid-bass driver is engineered to provide maximum impact output while keeping distortion to a minimum. this mid-bass uses a powerful, vented ferrite magnetic motor and lightweight paper cone with cloth surround to achieve high spl and loads of clarity. while optimized for 2-way pro audio systems, this driver is versatile enough for car audio and home hi-fi mid-bass work, and even musical instrument applications, such as bass guitar and keyboard. the mb620-8 is an 8 ohm 6-1/2” with a 2” voice coil and a 30oz ferrite magnet design. it offers a lot of bang-for-the-buck at 94db spl and 200 watts of continuous power handling. the mb620-8 has a wide and smooth usable frequency response from 100hz-7khz.
Specifications:
Nominal Diameter | 6-1/2" |
Bolt Circle Diameter | 6.15 |
Power Handling (RMS) | 200 Watts |
Power Handling (MAX) | 400 Watts |
Impedance | 8Ω |
Frequency Response | 100 to 7,000Hz |
Sensitivity | 94dB 2.83V/1m |
Voice Coil Diameter | 2" |
Resonant Frequency (Fs) | 104Hz |
DC Resistance (Re) | 5.47Ω |
Voice Coil Inductance (Le) | 0.93mH |
Mechanical Q (Qms) | 4.26 |
Electromagnetic Q (Qes) | 0.69 |
Total Q (Qts) | 0.55 |
Compliance Equivalent Volume (Vas) | 0.24ft³ |
Mechanical Compliance of Suspension (Cms) | 0.273mm/N |
BL Product (BL) | 6.67T·m |
Diaphragm Mass Inc. Airload (Mms) | 8.59g |
Maximum Linear Excursion (Xmax) | 2mm |
Surface Area of Cone (Sd) | 132.2cm² |
Cone Material | Paper |
Surround Material | Cloth |
Voice Coil Wire Material | CCA |
Basket / Frame Material | Steel |
Magnet Material | Ferrite |
Overall Outside Diameter | 6.57" |
Baffle Cutout Diameter | 5.8" |
Sealed Volume | 0.2ft³ |
Sealed F3 | 150Hz |
Vented Volume | 0.4ft³ |
Vented F3 | 76Hz |
Reviews:
These are a nice "natural" sounding driverE
7. Dean Z Metalman Bass – Classic Black
Product Details:
The dean z metalman bass leaves no doubt as to the kind of music you intend to play. case sold separately. basswood body, low-profile maple neck , rosewood fingerboard , 1 high-output humbucking soapbar pickup , classic machined tailpiece , sealed die-cast tuning machines , black hardware.
Reviews:
I purchased this Dean ML based on my appreciation for Dime and simply because teenage me committed to owning one someday. I found a pic that I took with Dime which reminded me of being in the front row watching him jam away on his Dime Slime years ago. For me, this purchase was primarily motivated by nostalgia, expecting build quality to be sort of, ok. I have to say, this guitar exceeded my expectations. Slight disclaimer: I purchased this item knowing I would immediately upgrade most of the hardware and adjust things to make it more comfortable for my playing. 1) It is a fantastic base instrument. It plays fairly well as sold. This was my first experience with a Floyd Rose Special. Also, it will definitely be my last. I played it stock for about 2 weeks to get a good feel for it before changing anything. It’s a great playing guitar. 2) Every review I saw said that the finish was amazing and pictures just couldn’t do it justice. I agree. They did a great job on the neck and body of this guitar. It’s flawless. 3) Everything was to spec on mine. Action, truss rod, intonation, fret, bridge and pickup height, all perfect. My fretboard had a somewhat excessive amount of dye on it but nothing too crazy. The nut on mine was clearly cut too deep leaving the high e in permanent sitar mode with fret buzz. So, quality control could be an issue. For my needs this wasn’t a problem as I had already decided on replacing virtually all hardware with new parts that I had on hand from a project that I decided not to restore. 4) The pickups sound great. The Dime Slime nailed the Pantera tones, not surprising. I was surprised by the classic/southern rock and soloist tones I was able to get with minor eq adjustments. Clear and warm through the drive/distortion. It does jazz and country pretty well too. It has a very balanced sound to it which I was not expecting. I’ve played it on three different amps with the same results. Great. This is a great buy. A solid guitar as is. However, in my case, this guitar didn’t really come to life until I did what I did: OFR Hot Rod, brass block,springs, some shielding, etc. Now, what really irritates me is that it plays a lot better than a few of my guitars that were either at or almost double the cost of the Dime Slime. Get One!SantaRosaJoe
Overall: I'm no stranger to the scratch and dent game. I think half the fun is trying to figure out where the scratch and or dent is. When this model V came out I already knew that it would be a great guitar. Never played a Dean I didn't like. This model is a steal even at full price. Mahogony body, maple neck, rosewood fretboard, Floyd and hot pickups. Actually, very hot pickups. My guitar has a bright sizzle to it in the bridge pickup and the neck pickup sounds great. Pretty balanced out put. The bridge is a Floyd Rose Lic. Stays in tune well. The fretboard is high quality. No fretsprout to speak of. Intonation is good, stays in tune and no high frets to speak of. The profile is the C shape. Similar to a 50s Lp just a tad thinner. The flat black finish is awesome the blem is only a slight discoloration on a portion of the binding. What that tells me is that the regular price model will be no doubt flawless. If you want that grind, metal, searing flamethrower sound the bolt on is the way to go. Bolt on necks are usually a little brighter. Sustains very well. I'm very very happy with it. It is exactly what it is advertised as. Buy one. You'll love it. Getting the ML X Floyd next. No doubt due to my own preference I will be swapping out the bridge pickup only. All my main guitars have Seymour Duncan TB and SH 6 bridge pickups. Great guitar for nodding to tour own preferences. You'd be doing killer as is too. I'm in no hurry to swap pickups. Great buy.
Not a V type of player. I like Wilco, the Pixies, the Smiths, Stone Roses, Courtney Barnett, etc. So when I saw Ryan Adams rocking a V by that other manufacturer that starts with G, I started thinking about the V body style. I liked this model because it was at the right price point and had the tradition V body style, if you don't think too much about the headstock. This guitar probably hasn't gotten any love because I don't see it as your typical Dime type guitar, and its not your typical vintage Flying V. The pickups are not high enough gain to get love from the shredders and the Headstock probably turns some people off. What I found is a pretty great guitar with some help. First, the action was high. I lowered the bridge significantly. The good news is that the frets are good I didn't run into any buzziness after lowering the action a little lower than I thought I could get away with. Next, the pickups needed adjustment. They were pretty low. I brought them up a little and found that the sound filled out and got chimey like it should. I adjusted the pole pieces to match the fretboard radius and viola! Most of these guitars have good pickups and don't need an immediate change. Folks, you need to learn how to properly adjust your guitar pickups! Then figure out if you need something different. PS adjust these pickups on a clean channel, you need to hear the guitar not distortion. Long story short, this is a great guitar. It shouldn't be your main axe, but its a great conversation piece that sounds better than it should. I feel like I discovered a diamond in the rough. P.S. The guitar is really light and comfortable to play with a strap.Fred
8. Glarry Gib Bass Guitar Full Size 4 String Ss Pickups W/ 20w Amplifier Black
Product Details:
Though it looks quite similar to the ordinary guitar, it actually is quite different from that one when it comes to function. compared with guitar, it features thicker strings and larger string tension. and it is located on low-pitch site, which makes it perfect in sending out wonderful bass effect. moreover, this bass adopts superb wood and synthetic material, so you can trustingly take it back home for entertaining!
Specifications:
Orientation | Right Handed |
Neck Material | Maple |
Fretboard Material | Rosewood |
Number of Strings | 4 |
Number of Frets | 24 |
Nut width | 1.656 in. (42 mm) |
Scale Length | 34" |
Pickups | Split Single-Coil Pickup; Single-Coil Pickup |
Control | 2 Volume, 2 Tone |
Strings Material | Nickel-plated carbon steel |
Strings Dimensions | G-0.045", D-0.065", A-0.08", E-0.1" |
Amplifier Power | 20W |
Speaker Size | 5.5 inch |
Impedance | 5.6Ω |
Input Jack | 1/4 inch |
Headphone Output Jack | 1/4 inch |
Guitar Weight | 6.6 lb / 3.0 kg |
Reviews:
5 string bass in burley wood. Fit and finish first class. Unbelievably light. Fantastic value for money. Mine played very badly out of the box, with the neck seemingly overdone on the truss rod. Relaxed that a turn, set intonation and saddles and it's pretty good now imo. Think it would benefit from having some frets filed a bit. But all in all it's excellent for the money. I could spend 3-4 times as much for the next up cheap 5 string, but I doubt it would play better and I bet it would be significantly heavier.
My second Glarry bass. the first purchase was a 4 string fretless – flawless instrument. Obviously I was happy with it – I bought another instrument. This 5 string arrived today. I spent a brief time setting up the action, as you would need to do with any new instrument. It was not at all necessary to have a shop do it, as they send the tools you need included with the instrument and it is great for a player to be able to do this themselves- it will make you a more knowledgable player and take additional pride in ownership. But the real reason for leaving this review is to convey just how great the quality is. My wife's initial reaction: "that is beautiful – a work of art!", and she is so correct. Having owned many basses and played for 35+ years, this is as good as any bass I have had. You will see many other reviews state the same thing. The action, the finish, the sound – there is nothing to complain about, even if you took the affordable price out of consideration. Buy one of these now before they figure out they could charge 2-3x as much and I would still recommend buying even at those prices. I am installing a thumb rest on it and using this the next weekend for a songwriter showcase. Can't wait to see what compliments I get on it. Glarry, you guys do a great job and my hat is off to you.
There's nothing really spectacular about this bass, except for possibly the bang for your buck. What you get is a fairly well made solid instrument that does the job without any unnecessary frills! Mine arrived well packaged and in good condition. There are a couple of minor finish blends, but they aren't noticeable if you're more than a foot away. The set up was nearly spot-on, only a few minor adjustments were required. The neck and fretwork were well done. Frets are smooth with no sharp ends. The fretboard is dry, but that is somewhat expected, and not a big deal. I did send the back of the neck with 1000 grit paper so it is now silky smooth and plays great. The pickups sound very good, though the volume puts taper rather abruptly. Overall, this is a good sounding, very playable bass! I am a happy Glarry customer once again!
9. Dean Metalman Project Bass 4 String Bass Guitar Walnut
Product Details:
Great sounding and 100% operational. would be great refinished. beautiful dean neck. a couple super light scratches on the headstock, i haven't tried to buff these out yet. weighs 9.14. the diamond plate accents are heavy. if you redid this without it would lighten it quite a bit.
10. Eminence Delta15lf4 15",1200w/2.5"vc/4ohms/ferrite
Product Details:
Eminence delta 15lf-4 15" driver 4 ohm the eminence delta 15lf-4 15" 4 ohm speaker is ideal for high power, low frequency performance in sound reinforcement systems, bass guitar combos, club music systems, and stage monitors. eminence lf models are designed with extended excursion to deliver more bass than standard models and provide smooth mid-band frequency response for three-way applications. nominal diameter15" power handling (rms)600 watts power handling (max)1200 watts impedance4 ohms frequency response40 to 2,200 hz sensitivity95 db 1w/1m voice coil diameter2.5" listing and template services provided by inkfrog open.
Specifications:
Impedance | 4 Ohms |
Frequency Range | 40 Hz – 2.2 kHz |
Sensitivity | 95 dB |
Power | 1200 W |
Magnet Material | Ferrite |
Reviews:
I bought these because I needed to replace two woofers that I blown. All I can say is money well spent, these speakers sounds excellent. I love a lot of bass and these does the job well. Love the bass these speakers produces. Not bad for the price and I would recommend these for anyone who loves excellent sound on a budget.TRACY
Great bottom end- you need a cabinet with 2 4" round ports to move the air or else it will distort..bigjohnyeti
11. Dayton Audio Mb820-8 8" Professional High Power Midbass Driver 8 Ohm
Product Details:
Built for high impact and low distortion, the mb820-8 8” midbass is a great choice for use in dynamic, high output 2-way and 3-way designs. with a damped paper cone, treated cloth spider, and powerful ferrite motor these drivers will deliver incredible clarity and detail even when pushed to extreme spl levels. suitable for use in professional speakers, studio monitors, and even car audio systems, these are incredibly flexible mid-bass drivers. 94db sensitivity and 200 watt continuous power handling allows the incredible output 2” voice coil and 40 oz ferrite magnet with vented pole-piece lightweight paper cone and cloth surround wide 100hz-7.5khz usable frequency response great for 2 or 3-way pro audio, car, or home hi-fi systems excellent choice for use in musical instrument applications dayton audio mb820-8 8" professional high power midbass driver 8 ohm dayton audio’s mb820-8 8” professional mid-bass driver is engineered to provide maximum impact output while keeping distortion to a minimum. this mid-bass uses a powerful, vented ferrite magnetic motor and lightweight paper cone with cloth surround to achieve high spl and loads of clarity. while optimized for 2-way pro audio systems, this driver is versatile enough for car audio and home hi-fi mid-bass work, and even musical instrument applications, such as bass guitar and keyboard. the mb820-8 is an 8 ohm 8” with a 2” voice coil and a 40oz ferrite magnet design. it offers a lot of bang-for-the-buck at 94db spl and 200 watts of continuous power handling. the mb820-8 has a wide and smooth usable frequency response from 100hz-7.5khz.
Specifications:
Nominal Diameter | 8" |
Bolt Circle Diameter | 7.75 |
Power Handling (RMS) | 200 Watts |
Power Handling (MAX) | 400 Watts |
Impedance | 8Ω |
Frequency Response | 100 to 7,500Hz |
Sensitivity | 94dB 2.83V/1m |
Voice Coil Diameter | 2" |
Resonant Frequency (Fs) | 69Hz |
DC Resistance (Re) | 5.26Ω |
Voice Coil Inductance (Le) | 1.04mH |
Mechanical Q (Qms) | 3.83 |
Electromagnetic Q (Qes) | 0.52 |
Total Q (Qts) | 0.46 |
Compliance Equivalent Volume (Vas) | 0.56ft³ |
Mechanical Compliance of Suspension (Cms) | 0.26mm/N |
BL Product (BL) | 9.57T·m |
Diaphragm Mass Inc. Airload (Mms) | 20.9g |
Maximum Linear Excursion (Xmax) | 4mm |
Surface Area of Cone (Sd) | 208.9cm² |
Cone Material | Paper |
Surround Material | Cloth |
Voice Coil Wire Material | CCA |
Basket / Frame Material | Steel |
Magnet Material | Ferrite |
Overall Outside Diameter | 8.22" |
Baffle Cutout Diameter | 7.13" |
Sealed Volume | 0.3ft³ |
Sealed F3 | 119Hz |
Vented Volume | 0.72ft³ |
Vented F3 | 61Hz |
Reviews:
Everything as expected thank you!TKO
12. Celestion Bn15-400x 15" 400w Neodymium Bass Guitar Speaker 8 Ohm
Product Details:
Not every player wants a super-clean, high-fidelity bass sound. characterised by an extended low end and greater linear excursion, green label speakers push out every note with a rich, warm tone and a powerful low-end thump. with ferrite magnets, green label speakers are primed for high-powered rock performances, where a full-bodied, warm, defined tone is essential.
Specifications:
Reviews:
The main thing is the sound: this has a low resonant frequency which makes the low E and A strings clear but not "boomy" or indistinct. It smoothes out the D and G strings with more even response. Electric bassists know the problem: The top two strings (especially the G) usually have a much brighter timbre. We've learned to adapt to that anomaly with tenth-intervals, thumb & pop technique plus finger-picking techniques. However, it SURE is NICE to have a speaker that automatically helps us use those high strings without so much annoying change in tone.The midrange is strong and over most of the fingerboard now. Highs are definitely there, but they are more balanced, less "peaky". That makes notes in the middle range (of Bass) more punchy. The bass doesn't get "lost" when you play a bit higher.Of course many players want the lighter-weight of Neodymium. This delivers. I just used it as a replacement in an old Fender cab, so I know that was the only difference. If you put this in a modern lightweight Baltic Birch cab, you could reduce weight even more.To qualify this opinion I can say that there is ONE speaker I like better for tone, which is the EV 15 bass speaker. I LOVE that sound, but I hate the weight.This delivers most (80%) of what the EV does sonically, but without the hefty price tag or threat of hernia. It ain't cheap, but it's not the premium price point either. Good choice for discerning "old-school" finger pluckers like me.Teacher of beauty
Ce HP Célestion pour ampli basse est une vraie bombe(400W 15" BNL X400).
13. Hot Sell Electric Bass Guitar Metal Black Color 6 Strings
Product Details:
14. Eminence Legend Cb158 15" Bass Guitar Speaker 8-Ohms
Product Details:
This eminence legend is in great shape and sounds fantastic. it has been well cared for and never abused. it s lived in a custom made 2×15 cab with a padded cover and only had about 50 watts through it. over all the speaker is in near mint condition and functions perfectly. foam can be added to the back lip if you intend to front load it, just send me a message after purchasing. note, i have 2 speakers available. they are identical aside from the sticker.
Specifications:
Nominal Basket Diameter | 15 inch, 381mm |
Nominal Impedance | 8 ohms |
Resonance | 34Hz |
Usable Frequency Range | 47Hz – 3kHz |
Sensitivity | 98dB |
Magnet Weight | 80 oz. |
Gap Height | 0.37 inches, 9.53mm |
Voice Coil Diameter | 2.5", 63.5mm |
Resonant Frequency (fs) | 34Hz |
DC Resistance (Re) | 6.15 |
Coil Inductance (Le) | 0.33mH |
Mechanical Q (Qms) | 5.9 |
Electromagnetic Q (Qes) | 0.36 |
Total Q (Qts) | 0.34 |
Compliance Equivalent Volume (Vas) | 336 liters / 11.9 cu.ft. |
Peak Diaphragm Displacement Volume (Vd) | 411cc |
Mechanical Compliance of Suspension (Cms) | 0.31mm/N |
BL Product (BL) | 16 TM |
Diaphragm Mass Inc. Airload (MMs) | 70 grams |
Efficiency Bandwidth Product (EBP) | 95 |
Maximum Linear Excursion (Xmax) | 4.8mm |
Surface Area of Cone (Sd) | 856.3 cm2 |
Maximum Mechanical Limit (Xlim) | 9.5mm |
Sealed | 54-65 ltr/1.9-2.3 cu. ft. |
Vented | 54-159 ltr/1.9-5.6 cu. ft. |
Driver Volume Displaced | 239 cu.in. / 3.92 liters |
Overall Diameter | 15.21 inches, 386.4mm |
Baffle Hole Diameter | 14 inches, 355.3mm |
Front Sealing Gasket | Fitted as standard |
Rear Sealing Gasket | Fitted as standard |
Mounting Holes Diameter | 0.28 inches, 7.1mm |
Mounting Holes BCD | 14.56 inch, 369.9mm |
Coil Construction | Copper voice coil |
Coil Former | Polyimide former |
Magnet Composition | Ferrite magnet |
Core Details | Vented and extended core |
Basket Materials | Die-cast aluminum basket |
Cone Composition | Paper Cone |
Cone Edge Composition | Cloth cone edge |
Dust Cap Composition | Solid composition paper dust cap |
Reviews:
I have a Rumble 1 x 15 cabinet. I wanted to upgrade from the Eminence-Made for Fender speaker. At the advise of an Eminence Tech I purchased the CB158. It sounds great! Clear deep tones I plan on buying a second Rumble 1 x 15 cabinet and I'll upgrade that one also! The sale price made it a great value!Chuck
You can experience quite a bit of satisfaction when a product you paid a fair amount of money for just plain works. And boy does this speaker work. The solid bass tones that come out of this baby has brought my 80s something Fender Bassman Compact back to life. I was happy all the bolt holes lined up with the pre drilled holes of the amp. The only little drawback is that it has made my amp heavier. Not a bad trade off for the quality sound that this speaker delivers.Darren
I refurbished an Ampeg 115hp bass cabinet and installed a CB158 15". The speaker provides tremendous frequency response, tight solid bottom end with crisp clean highs. I no longer use the horn in the cabinet…there is no need. I highly recommend this speaker to get the most out of a bass rig. It also pairs very well with my Ampeg PF210HE.Francis L
15. Dean Metalman Bass
16. Eminence Basslite Bass Guitar Speaker
Product Details:
Continuing to be the popular choice for bass players looking to reduce the weight of their rigs, the eminence basslite sc10 is a 10 speaker optimized specifically for sealed bass cabinets. the ultra-light weight of this vibrant speaker will take the bulk out, but leave the performance in. featuring a 4-ounce neodymium magnet and 2-inch voice coil, this 10-inch speaker is available in 16 and 32 ohms for your 4×10 or 8×10 rig. this 16-ohm model of the eminence basslite sc10 has a program power rating of 300-watts.
Specifications:
Nominal Basket Diameter | 10", 254 mm |
Nominal Impedance | 16 O |
Program Power | 300 W |
Watts | 150 W |
Resonance | 46 Hz |
Usable Frequency Range | 50 Hz – 4.2 kHz |
Sensitivity | 94.3 dB |
Magnet Weight | 4 oz. |
Gap Height | 0.28", 7.1 mm |
Voice Coil Diameter | 2", 51 mm |
Resonant Frequency (fs) | 46 Hz |
DC Resistance (Re) | 12.21 O |
Coil Inductance (Le) | 0.89m H |
Mechanical Q (Qms) | 2.23 |
Electromagnetic Q (Qes) | 0.56 |
Total Q (Qts) | 0.45 |
Compliance Equivalent Volume (Vas) | 78.27 liters / 2.76 cu.ft. |
Peak Diaphragm Displacement Volume (Vd) | 154 cc |
Mechanical Compliance of Suspension (Cms) | 0.46 mm/N |
BL Product (BL) | 12.79 TM |
Diaphragm Mass Inc. Airload (MMs) | 26 grams |
Efficiency Bandwidth Product (EBP) | 81 |
Maximum Linear Excursion (Xmax) | 4.4 mm |
Surface Area of Cone (Sd) | 350.1 cm2 |
Maximum Mechanical Limit (Xlim) | 9 mm |
Driver Volume Displaced | 0.03 cu.ft. / 0.84 liters |
Overall Diameter | 10.08", 256 mm |
Baffle Hole Diameter | 9.18", 233.2 mm |
Mounting Holes Diameter | 0.25", 6.4mm |
Mounting Holes BCD | 9.66", 245.4mm |
Net Weight | 3.5 lbs, 1.59 kg |
Coil Construction | Copper voice coil |
Coil Former | Polyimide former |
Magnet Composition | Neodymium magnet |
Core Details | Non-vented core |
Basket Materials | Pressed steel basket |
Cone Composition | Curved paper cone |
Cone Edge Composition | Cloth cone edge |
Dust Cap Composition | Solid composition felt dust cap |
Reviews:
Excellent bass guitar speaker at a reasonable price. I built a 3.9 cu-ft 4-ohm 410 (3 front + 1 rear) with these and like the way they are voiced. The cab is tuned to 50 Hz with port plugs which can be used to make it sealed for a tighter low end. The SC10-16 is also light weight with good sensitivity and reasonable power handling. With a 3/4" birch ply baffle and 1/2" european poplar ply for the rest of the cab final weight was only 47.6 lbs. (Picture imported with 90 deg rotation)5StringPocket
I used these for replacement in an Ashdown bass amp
I replaced the speakers in a Hartke 2-10 cabinet with these. It sounds great at low volume, but it cannot be used for a gig, even in a small venue. At a moderate volume, anything at or below the low G on a bass makes the speakers rattle (I tried with the speakers outside the cabinet as well, so it's not the cabinet rattling). They don't seem to be able to handle the rated power, so this cabinet will be staying at home.David
17. Dayton Audio Mb1025-8 10" Professional High Power Midbass Driver 8 Ohm
Product Details:
Built for high impact and low distortion, the mb1025-8 10” midbass is a great choice for use in dynamic, high output 2-way and 3-way designs. with a damped paper cone, treated cloth spider, and powerful ferrite motor these drivers will deliver incredible clarity and detail even when pushed to extreme spl levels. suitable for use in professional speakers, studio monitors, and even car audio systems, these are incredibly flexible mid-bass drivers. 95db sensitivity and 350 watt continuous power handling allows incredible output 2.5” voice coil and 70 oz ferrite magnet with vented pole-piece lightweight paper cone and cloth surround wide 60hz-5.5khz usable frequency response great for 2 or 3-way pro audio, car, or home hi-fi systems excellent choice for use in musical instrument applications dayton audio mb1025-8 10" professional high power midbass driver 8 ohm dayton audio’s mb1025-8 10” professional mid-bass driver is engineered to provide maximum impact output while keeping distortion to a minimum. this mid-bass uses a powerful, vented ferrite magnetic motor and lightweight paper cone with cloth surround to achieve high spl and loads of clarity. while optimized for 2-way pro audio systems, this driver is versatile enough for car audio and home hi-fi mid-bass work, and even musical instrument applications, such as bass guitar and keyboard. the mb1025-8 is an 8 ohm 10” with a 2.5” voice coil and a 40oz ferrite magnet design. it offers a lot of bang-for-the-buck at 95db spl and 350 watts of continuous power handling. the mb1025-8 has a wide and smooth usable frequency response from 60hz-5.5khz.
Specifications:
Nominal Diameter | 10" |
Bolt Circle Diameter | 9.57 |
Power Handling (RMS) | 350 Watts |
Power Handling (MAX) | 700 Watts |
Impedance | 8Ω |
Frequency Response | 60 to 5,500Hz |
Sensitivity | 95dB 2.83V/1m |
Voice Coil Diameter | 2.5" |
Resonant Frequency (Fs) | 45Hz |
DC Resistance (Re) | 5.3Ω |
Voice Coil Inductance (Le) | 1.2mH |
Mechanical Q (Qms) | 6.47 |
Electromagnetic Q (Qes) | 0.36 |
Total Q (Qts) | 0.34 |
Compliance Equivalent Volume (Vas) | 1.79ft³ |
Mechanical Compliance of Suspension (Cms) | 0.3mm/N |
BL Product (BL) | 13.1T·m |
Diaphragm Mass Inc. Airload (Mms) | 41.1g |
Maximum Linear Excursion (Xmax) | 3mm |
Surface Area of Cone (Sd) | 342.5cm² |
Cone Material | Paper |
Surround Material | Cloth |
Voice Coil Wire Material | CCA |
Basket / Frame Material | Steel |
Magnet Material | Ferrite |
Overall Outside Diameter | 10" |
Baffle Cutout Diameter | 9.14" |
Sealed Volume | 0.5ft³ |
Sealed F3 | 105Hz |
Vented Volume | 0.8ft³ |
Vented F3 | 63Hz |
Reviews:
I purchased these woofers to better balance the output with the midrange & tweeter in my loudspeaker system. I built 1.5 cu ft vented enclosures tuned to 50Hz with a 4" diameter port. The bass output is appropriate and matches well – as I hoped – and the system has a nice punch to the bass. The bass response is extended through the use of a 12" powered subwoofer that works from about 50 Hz down.KEITH
This is a great value woofer. Crossed over low enough to reduce the impact of the peak in the frequency response at ~3200 Hz is the key to excellent performance. I'm using it in a 2nd order crossover with an L=0.9 mH and C=12uF. It mates really well with higher sensitivity tweeters that can be crossed low including the Dayton Audio RST28F-4 or RST28A-4 (the one I'm using with C=20uF and L=0.3mH).Edward
18. Glarry Burning Fire Electric Bass Guitar Full Size 4 String Cord Wrench Tool Black
Product Details:
Introductions the glarry burning fire electric bass guitar full size 4 string cord wrench tool is a gorgeous, high-performance electric guitar that wont disappoint you. constructed with a lightweight contoured basswood body, it is a fine-toned instrument with an outstanding look and sound. the important thing is that the guitar is beautifully shaped. comfortable maple neck makes it easy to fly up and down the rosewood fingerboard with ease. easily transportable, accurately intonated and fun to play, it surely is worth your investment. plus, it comes with full accessories for added convenience.features 1. constructed with a lightweight contoured basswood body2. a fine-tone instrument with an outstanding look and sound3. comfortable maple neck4. fly up and down the rosewood fingerboard with ease5. accurately intonated, exceed your every expectationspecifications 1. brand glarry2. style burning fire bass3. orientation right handed4.
Reviews:
I am pretty happy with the end results, I'll start with the cons because it's a short list: there were a few chips in the paint on the bass when it arrived (somewhere around 2-4). This is likely a shipping issue more than Glarry itself, however they are so small and obscure you would have to know they are there and look straight for them in order to see them. Now onto the pros: Price, price price. Glarry has put profit behind them and prioritized putting instruments into the hands of as many people that are passionate to get one as possible. This bass plays like any other bass and at a 1/3 of the cost of most mainline basses. Not to mention it looks way cooler and comes with a bag and a pick and some tools, wires and a strap. It's just overwhelming bang for buck and I respect prioritizing making it cheap and easy for everyone who wants an instrument to get one over profit. Can't stress it enough. Would recommend to anyone and everyone looking for one of the instruments available on this site.
Just bought one for my granddaughter to learn to play. I do guitar setup work, so I know what I'm talking about. It arrived with neck relief set perfectly! Action needed a slight adjustment, nothing major. Fret end were well filed and didn't need much attention. Neck feel is great! Overall excellent product. Fit and finish were really good, especially in this price range Fantastic bass, especially for the price. Minor complaints: Although it comes with a strap and a gig bag, both were cheap and inadequate and needed replaced. Small amp that came with it appears to be way less than 20 watts, probably more like 2 watts. But amp is useable for a novice learning at home. So this is the good and bad, but really nice bass and an excellent value!me
I bought to learn Bass Guitar, I'm learning at an awesome rate on this Bass. My instructor said it's weight is perfect, not too heavy. He's a Speed Metal player. That's what I'm learning. I'm influenced by Grindcore and Death Metal. The design of this Bass Guitar fits with dark and creepy vibe. Keep up the great work, Glarry!
19. Wholesale Metal White 5 Trings Electric Bass Guitar,1 Piece
Product Details:
20. Md Metal Driver Md-Ss / G-3
Product Details:
Hello, i will support your music life from japan. i will do my utmost for the service you satisfy. item description md metal driver md-ss / g-3 the brand "md (metal driver)" was born under the production of masaki matsubara. the maple / mahogany body has a semi-hollow structure, and is a wood material called a 5-piece laminate with a rosewood fingerboard / maple neck. in addition to the ssh pickup layout of single coil / single coil / humbucker, it is also equipped with a midi terminal. equipped with a lock type peg / tremolo unit, etc., it is finished in a high quality model. the blue flake (lame) color is also cool. [spec] body: maple / mahogany neck: maple / rosewood 5p fingerboard: rosewood p.u: sound garage jam spirit-pro single x 2 / vst-2 divided pu weight: 3.95kg w / softcase nut replacement, no arm midi part unchecked (none) -+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- the description is as detailed as possible, due to the nature of the product, notation of all states may be difficult. for those
Related posts:
- Best Bass Guitar For Jazz (2023 Update)
- Electric Guitar Headstock Shapes By Brand For Sale (2024 Update)
- Guitar Amp For Keyboard For Sale (2024 Update)
- Heavy Metal Bass Guitar For Sale (2024 Update)
- Memphis Les Paul Guitar For Sale (2023 Update)
- Best 6 String Guitar (2024 Update)
- Best Baritone Electric Guitar (2024 Update)
- Best Cheap Jazz Guitar (2024 Update)
- Best Ibanez Guitar For Beginners (2024 Update)
- Best Metal Bass Guitar (2024 Update)