Are you looking for the Guitar Pickups On Bass? If so, you’ve come to the right place.
Choosing the Guitar Pickups On Bass can be difficult as there are so many considerations, such as EMG, WD Music, DiMarzio, Peavey, Seymour Duncan, Washburn, Fishman, Fender, Dragonfire, Hondo. We have done a lot of research to find the top 20 Guitar Pickups On Bass available.
The average cost is $157.19. Sold comparable range in price from a low of $59.99 to a high of $309.00.
Based on the research we did, we think Yosemite J Bass Pickup Set is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Guitar Pickups On Bass (20 Sellers)
Product Image | Product Name | Features | Check Price |
---|---|---|---|
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
$119.99
4.7
Reviewers Noted:
Good sound quality . Visual appeal . Ease of use
Features:
- Colour: black
- Made in: usa
- Number of strings: 4
Reviewers Noted:
Good sound quality . Easy to install . Attractive . Instruction quality . Craftsmanship
Features:
- Passive pickup with a vintage tone
- Features alnico 5 poles and features two custom wound split-coils
- Eliminates the noise and hum usually associated with early 70’s bass pickups
Reviewers Noted:
Good sound quality . Well made . Easy to install . Visual appeal . Durability
Features:
- Item package dimensions (l x w x h): 14.5 x 8.5 x 3.3 cm
- Item package weight: 200g
- Made in the usa
$309.00
4.8
Reviewers Noted:
Good sound quality . Well made . Easy to install . Visual appeal . Durability
Features:
- A perfect pairing of massive sounding quarter pound pickups and our most aggressive bass pre-amp to deliver bass tone as versatile as it is crushing.
- Rex brown pj system.
- Usa designed and made.
$59.99
4.9
Reviewers Noted:
Good sound quality
Features:
- Emg's exclusive quik-connect cable
- Prewired split shaft volume/tone control set
- Output jack
Reviewers Noted:
Good sound quality . Craftsmanship
Features:
- Make sure this fits by entering your model number.
- All the advantages of an alnico microphone on your triple winding mic bass.
- The sound will be warm, powerful bass and sharp treble.
Reviewers Noted:
Good sound quality . Durability . Ease of installation
Features:
- 2 emg-exclusive cables
- Prewired control set including 2 volume controls
- Master tone control
Reviewers Noted:
Good sound quality . Visual appeal . Craftsmanship
Features:
- Colour: black
- Made in: usa
- Position: bridge / neck
Reviewers Noted:
Good sound quality . Durability
Features:
- For bridge and neck position
- Alnico 5 magnets
- Flush-mount pole-pieces
Reviewers Noted:
Good sound quality . Durability . Visual appeal . Craftsmanship
Features:
- Quarter-pound single coil
- Type p for bass
- The 1/4 inch magnet prepare an improved sensitivity to the play
Reviewers Noted:
Sound quality
Features:
- Replacement neck soapbar pickup f f ibanez
- Other basses with mk-1 shape pickups
- Groove tools
Reviewers Noted:
Good sound quality . Visual appeal . Ease of use
Features:
- Handcrafted in corona california
- Specifically voiced for each position
- Extreme versatile tone
$189.00
4.6
Reviewers Noted:
Good sound quality
Features:
- Emg's exclusive quik-connect cables (2)
- Prewired control set including 2 volume controls, master tone control, and output jack
- Battery clip
$99.99
4.9
Reviewers Noted:
Good sound quality . Visual appeal
Features:
- Each half is a complete humbucker
- Extends both low- and high-end response
- Double-blade design adds snap for crisp attack
$189.95$169.95
4.8
Reviewers Noted:
Good sound quality . Attractive . Ease of installation . Craftsmanship
Features:
- Dual concentric (stacked) 2-band eq for treble and bass
- Push-pull pot for volume/coil split
- 3-way mini toggle switch for easy voice selection
$149.99
4.8
Reviewers Noted:
Good sound quality . Ease of installation
Features:
- Ultra j-style
- Neck & bridge
- Colour: black
$289.95
4.8
Reviewers Noted:
Good sound quality . Attractive . Craftsmanship . Ease of installation
Features:
- Multi-voice performance, dynamic range, and articulation for 4-string bassists
- 2-band eq with separate treble/bass
- Blend pot with easy in/out harness
$219.99
4.8
Reviewers Noted:
Good sound quality . Easy to install . Durability . Visual appeal . Ease of use
Features:
- Formvar magnet wire for brighter tone
- Flush-mount magnets for even string response
- Alnico 5 magnets for more focus and enhanced dynamics
$139.99
4.8
Reviewers Noted:
Good sound quality
Features:
- Colour: black
- Number of strings: 4
- Made in: usa
$99.00
4.5
Reviewers Noted:
Good sound quality . Durability . Ease of installation . Craftsmanship
Features:
- Deep low end without sacrificing clarity
- Parallel coils
- Low-noise preamp
1. Yosemite J Bass Pickup Set
Product Details:
For those who crave that big bass tone. the fender yosemite jazz bass pickup set are the pickups you need to really thicken up your sound. by installing these in your bass guitar, you'll be able to freshen up your resonance and give it that edge that it's been missing. revive your instrument and hear the difference.rich, dynamic, and full bodied the fender jazz bass pickup set will push your sound in a new direction. you can feel vibrations under your fingers as you smash through one of your tunes. these ultra-sensitive pickups sense ever little nuance you play. so slap, pluck, and finger-pick – make no doubt all playing techniques will be heard with pure definition.
Specifications:
Reviews:
I put these in an American professional jazz to be able to blend without noise. I chose them because I wanted it to remain a completely Fender bass. They aren't absolutely horrible sounding, but I have decided the only way these companies should make noiseless "single coils" is by using side by side split coils. Not stacked dual coils. Splitting the coils gives good output, attitude, and a low mid bump- you know the kind that makes people love P basses. Everybody is figuring this out except Fender- the greatest guitar maker in the world. Aguilar, Dimarzio, Nordstrand, Seymour Duncan (recently), mojotone (guitar pickups), Fralin. They've all figured out the noiseless thing. I ended up with Nordstrand NJ4SE in one and Dimarzio model J in the other. Love both of my jazz basses now. I love you Fender, but get in the game with your pickups!Andrew
I don't know if this is the LATEST version of the noiseless jazz bass pickups…it is so hard to keep up with Fender as they roll out newer versions, however, this is a great replacement to older jazz bass pickups. It really as close to noise free as you can get as you solo each pickup individually. As most jazz bass players know, the single coil aspect of the jazz bass pickup is GOING to get some hum or noise unless you are playing both the neck and bridge pickups at the same time to cancel out noise. This retains the signature Fender Jazz Bass sound with great clarity with the advantage of being noise free. Highly recommended!!road-cat1
These are a special wind from Tim Shaw, the ultimate pickup guy at Fender. They are capable of perfect vintage deep bass while throwing out strong mids and super crisp, bright highs. Not super hot so you still have to work if you want overdrive distortion, which is a good thing. These have become my favorites for all my Fender builds–basses, teles, and strats.bobvarns
2. Emg Gzr Pj Geezer Butler Bass Pickup Set (Black)
Product Details:
The pjhz set combines our phz and ljhz pickups, giving bass players who prefer the response and feel of a passive pickup with the flexibility and tone known to emg. both pickups use ceramic magnets with steel poles for amazing clarity and sonic range. this set can be used as a direct replacement for all fender-style pj instruments. all emg passive pickups have our 5-wire quik-connect output allowing for a number of wiring options, and are fully shielded for minimal noise. string grounding is recommended to further decrease noise.
Specifications:
Reviews:
I was excited to get the geezer split pbass pickup. After some manipulation it's great. I had to reverse the pots to allow the ground to reach the bridge. I'm concerned why a 4 inch ground was supplied while ample cable was supplied to the rest of the process. Maybe I bought one that was made after lunch. It does sound great. But to EMg qc Make the ground cable longer. My USA pbass from 94 did not have a compatible channel to the bridge. Had to Go hd to buy spec bit to make it happen. Rock onConor Daily
Overall: I bought these like 6 or 8 months ago for a Squier Affinity PJ Bass. The J pickup wasn't a throw in like the P pickup. I had to expand a little bit the pickup opening to make it fit. The installation was a hassle. I originally bought these for the "convenience" of solder less installation but could't get it to work.Had extra low volume and lots of ground and hiss. I uninstalled and reinstalled several times with no success. I gave up. Last week, I decided to try again. I ignored the instructions and started experimenting by inverting some of the connections. After a few trials and errors, I inverted one of the tone connections and problem solved! Now they're sounding good, punchy and with no hiss or ground noise whatsoever.In conclusion, installation can be way harder that one would think of solder less connections, but the end result is very satisfactory to the ears.Cesar
I got these to replace a faulty fender pickup that packed up in a almost new instrument. Turned out that it was so overwound that the copper was rubbing on the inside edges of the pickup cover.This plus all sorts of debris & dust under the pickguard resulted in cutting through the winding. Anyway I couldnt be bothered going through the hassle returning the instrument & thought Id try these toneriders ,they are easy to fit & of a much higher quality construction over the vintage fender ones. They sound much better also, they are full bodied & punchy with slight break up distortion only at the very top end of the volume knob which sounds good, i think thats why they describe them as hot vintage. I was initially concerned to replace the stock ones but these are great fun & much better so it worked out nicely in the end. Oh the tonerider has vintage wire & the fender ones did not even though they were supposed to be vintage models. These I honestly recommend.johnthecarpfather
3. Seymour Duncan Spb-3 Quarter Pound P-Bass Pickup
Product Details:
This precision pickup is for musicians who want maximum output and extended frequency range. large quarter-inch wide pole pieces expand the magnetic field and extend the frequency range from low to high end for a fat full punchy sound with midrange presence. the seymourized u2122 design balances the coils with the magnets for great sustain and harmonics. pickup cover included.nnthere's a reason this is our most popular basslines pickup massive tone. the qp has a fat, punchy tone that pushes p-bass pickups past previous models with design and frequency improvements. the quarter-inch diameter pole pieces expand the magnetic field and extend the frequency ranges for fat, full, punchy sound with tremendous mid-range presence and maximum output. though often used for heavy rock tones, this pickup gives amazing tonal versatility, making it a favourite across the board in live and studio settings. this pickup is a drop-in replacement for any american standard precision bass. hand built i.
Specifications:
Reviews:
I replaced pickups in my old Madeira bass. They were thin-sounding, weak and I think there was some short. After 35 years, I used my gift card and treated myself to these pickups. I wired them myself, tested them out, and was floored. Nice, powerful sound, strong tone and more harmonics. There are no negatives with this product. I would strongly recommend this to anyone looking for tone improvement.James
I have Fender P bass, no surprise there. This pickup really shines with distortion, overdrive, and fuzz through my tube amps. The dynamic range and tone of this pickup really shows up with all my overdrive pedals, etc. I notice this pickup pushes my amp more than the Seymour Duncan Quarter Pound pickups I have in another P bass of mine. The SPB-2 has a more vintage voicing than the very popular Quarter Pound SPB-3. I like the mid and crispness I get with the SPB-2 a bit more than the SPB-3. My only issue (though minor) is with installation, I wish the foam that goes under the pickup pushed the pickup up more. Namely, the foam needs a little more resistance to the mounting screws. I had to use different mounting screws to get my pickup as high as I wanted it. This might be particular to my bass though. Overall, this is pickup is great for heavy/loud music styles: posthardcore, math rock, punk, metal. I don't play mellower music or solid state amps, so I can't tell you if it good for those applications. But I can say that my individual notes were more articulate and filled my space (moved more air) with these pickups. Chords sounded very powerful too.MathRockerChris
If you're looking for that vintage, dark, Fender p-bass tone, this isn't for you. If you want a strong attack, articulate highs and mids with a booming low-end that's loud enough to drown out the drummer, then this is a great option. I installed these in a project bass that I made for aggressive style rock and punk without distortion or much overdrive. After a lot of research, I chose these. I installed them, plugged in, plucked a quick riff, and then turned down the amp. These things are loud and the tone is pure aggression. I'm extremely pleased with this pickup. It delivers as advertised by providing a modern, aggressive tone that has punch and attack with a solid low-end that cuts through the mix.DaveH
4. Seymour Duncan Rex Brown Signature Pj Bass Pickup Set
Product Details:
The seymour duncan rex brown signature is a perfect pairing of massive sounding quarter pound pickups and seymour druncan's most aggressive bass pre-amp to deliver bass tone as versatile as it is crushing. the man who held down the low-end in pantera knows bass tone. nowadays, rex's style runs the gamut from soulful blues-based rock, to the rib-cage rattling metal he's so well known for. rex recently fell in love with the quarter pounder pj set, but also wanted the power and versatility of seymour druncan's most aggressive active pre-amp and eq, and the ability to quickly and easily engage it with a push/push volume pot the rex brown quarter pounder pj set was born! "after nearly a year or more of different wiring harnesses, volume pots and electronic genius, the new 'rex brown quarter pounder pj set' is here! this set is the first of its kind for bass players that like the sound of the original quarter pounders, but with the addition of a switchable 3-band active preamp to take 'em over the top, all with the push of the volume knob. the dream is alive!" includes all necessary hardware; high-quality potentiometers on pre-wired harness, battery clip, stereo jack, and black-anodized dome knobs.
Specifications:
Reviews:
I replaced pickups in my old Madeira bass. They were thin-sounding, weak and I think there was some short. After 35 years, I used my gift card and treated myself to these pickups. I wired them myself, tested them out, and was floored. Nice, powerful sound, strong tone and more harmonics. There are no negatives with this product. I would strongly recommend this to anyone looking for tone improvement.James
I have Fender P bass, no surprise there. This pickup really shines with distortion, overdrive, and fuzz through my tube amps. The dynamic range and tone of this pickup really shows up with all my overdrive pedals, etc. I notice this pickup pushes my amp more than the Seymour Duncan Quarter Pound pickups I have in another P bass of mine. The SPB-2 has a more vintage voicing than the very popular Quarter Pound SPB-3. I like the mid and crispness I get with the SPB-2 a bit more than the SPB-3. My only issue (though minor) is with installation, I wish the foam that goes under the pickup pushed the pickup up more. Namely, the foam needs a little more resistance to the mounting screws. I had to use different mounting screws to get my pickup as high as I wanted it. This might be particular to my bass though. Overall, this is pickup is great for heavy/loud music styles: posthardcore, math rock, punk, metal. I don't play mellower music or solid state amps, so I can't tell you if it good for those applications. But I can say that my individual notes were more articulate and filled my space (moved more air) with these pickups. Chords sounded very powerful too.MathRockerChris
If you're looking for that vintage, dark, Fender p-bass tone, this isn't for you. If you want a strong attack, articulate highs and mids with a booming low-end that's loud enough to drown out the drummer, then this is a great option. I installed these in a project bass that I made for aggressive style rock and punk without distortion or much overdrive. After a lot of research, I chose these. I installed them, plugged in, plucked a quick riff, and then turned down the amp. These things are loud and the tone is pure aggression. I'm extremely pleased with this pickup. It delivers as advertised by providing a modern, aggressive tone that has punch and attack with a solid low-end that cuts through the mix.DaveH
5. Emg 60 Active Guitar Humbucker Pickup, Black
Product Details:
One of the most popular emg’s, the 81 is the one that started a revolution. utilizing powerful ceramic magnets and close aperture coils, the tone was designed with detailed intensity, incredible amounts of high end cut, and fluid sustain. traditionally used in the bridge position of your guitar, this humbucking pickup will make your leads slice right through even the densest mix.the 60 humbucker packs plenty of output with a balance of thick, boosted mids, big lows and singing highs. featuring close aperture coils, similar to a mini-humbucker, this model produces rich harmonic overtones with plenty of sustain. due to its ceramic magnets, the emg 60 has a full treble response and loads of output great for distinct single-note solos. the 60 provides clarity and character to your guitar and works very well in the neck position. like all emg active guitar and bass pickups, the 60 installs without the use of a soldering iron, making it easy to do at home.
Specifications:
Reviews:
This pickup came stock in the neck of my ESP LTD EC-1000 along with an EMG 81 in the bridge. All I can say is that this pickup is amazing. I play metal and play with my treble and bass turned up and the mids pulled way back on my amp. It definitely has the mid range crunch and brillance as advertised. For distorted lead playing the sound is smooth and full with just the right amount of crunch and for rhythm it packs plenty of punch. The clean sound is very strong and sounds good for chords and lead alike. This pickup is so good that I don't hardly ever use the 81, for lead or rhythm. It's a shame that this pickups isn't more popular because it is a very versatile and excellent sounding pickup. Just be warned that if you get this pickup that you may never need to use a bridge pickup again!Anonymous
I had the EMG 81, 85 combo. I replaced the EMG 85 with the EMG 60. This pickup gets the most pretty clean sound and compared to the 85 I like the 60's clean tone lots, lots better. The volume and bass are more equal to the 81 so when I switch pups there is no volume change. It also has a very nice distorted tone. I'm metal all the way. The EMG 60 and EMG 81 are the way to go. This is a much better combo than the 85 (no offense to anyone). I did keep my 85 and will always have it in storage but I'm sticking with the 60. The 81 is by far hotter than the 60 but the 60 gets a great bite. I love the pickup. I'm very satisfied with my 81, 60 combo. This is the way to go…..Thanks for reading my review.Lucusarts
6. Seymour Duncan Smb-4a Alnico Music Man Bass Pickup
Product Details:
Smb-4a musicman alnico bass pickup the alnico magnets, together with unique coil windings, have the effect of extending both ends of the frequency spectrum beyond that of the ceramic magnet version in other words, the alnico version is both warmer on the bottom and more detailed on top comes with four-conductor hookup cable and logo cover the alnico magnets, together with unique coil windings, have the effect of extending both ends of the frequency spectrum beyond that of the ceramic magnet version this 4-string music man stingray replacement is voiced like the original 70s stingrays, for a more organic response and feel. seymour duncan has constructed a mm pickup that captures the feel and warmth of the originals. all the vintage 70s mm tone can be found in this version, which uses oversized alnico 5 rod magnets, together with our unique coil windings to deliver an extended response at both the treble and bass ends of the frequency spectrum. compared with the ceramic version, this pickup is both warmer on the bottom, and more detailed on the top. this is the tone that changed funk, rock, and slap forever. this pickup is a drop-in replacement for 4-string music man stingray basses. it may fit into olp instruments as well, but check the dimensions of our pickup (on this site) against the size of your olps pickup slot to be sure.combine with our music man replacement preamp for a complete setup. note not for use with music man basses that have a 3-way blade switch. hand built in santa barbara, ca, the alnico music man replacement pickup uses oversized alnico 5 rod magnets, forbon flatwork, 4-conductor leadwire, and is vacuum wax potted for squeal-free operation.
Specifications:
Reviews:
I installed this in an Squier dimension bass. I had already installed an S.D. musicman preamp. This pickup gave me the stingray sound or at least close to it. I had to route out the pickup opening for it to fit. It was worth the effort tho. I wish it was priced closer to the Wilkinson $31 I bought for another bass. $95 seems a little high. Because they have close to the same sound. Or at least I don't hear a $64 difference.maverbivin
Overall: We have a 1996 Korean Epiphone RockBass parts-caster that's been around forever in the rehearsal room, so we decided to switch out the Jazz body for a Made In Korea Hondo P-bass body with a small humbucker in the bridge position,split coil in neck postion. We did a small amount of routing to the Hondo body (found out it was solid,not laminated), then added the SMB4D. Wired as full humbucker with the stock split-coils in the neck postion,with 3 volume pots,1 tone. The SMB4D changed that old Korean solid body import into something I never imagined. It kept sounding awesome,no matter what we plugged it into. We layed down some bass track running direct into an RME Babyface Pro,duplicated a precorded track using a USA Fender Precision. Wow,and double wow…the tonal harmonics, all the needed mojo for great bass tracks are in this Music Man replacement pup from Seymour Duncan. It shines played through high $ player's amps…it's the real deal tone-junkie pup. Very happy with this purchase.Kenneth
Overall: I purchased this pickup to replace the stock one in my Sterling Ray4 Sub Bass which sounded OK before.But now…WOWI highly recommend this pickup if you are going to use your Ray4 for gigging.You and your band mates will be very happy.The bottom is very punchy and clean,The mids are smooth, and the treble rings through clear.You figure $300. For the bass and $100. For The pickup both through zZounds plus the cost of my friend who installed it.For less than $500. I have a Bass that holds its own day in and day out.I bought the bass and pickup both on zZounds payment plan so that made it much easier for a working stiff like me to have quality gear without having to go broke.Gary
7. Emg Pj Bass Pickup Set (Black)
Product Details:
Three time bass player magazine's "player of the year" victor wooten knows a thing or two about playing bass. victor has been using emg's since he got his first fodera bass years ago. victor plainly states that emg pickups have helped him achieve his tone and refine his technique. the emg-pj combines the emg-p and a single emg-lj unit in a complete assembly giving you improved flexibility for dimensions of sound. the pj enables a wide range of tone blends from your bass. the emg-p has a full complement of low register power. the emg-lj provides a full midrange and extended high frequency response for a well defined attack. used separately, or in combination, they offer a flexible selection of bass tones, accommodating both modern and traditional bass playing styles. the result is pure capability; the capacity to produce everything from tight slap funk to smooth motown groove, all with a sound that'll set you apart. the pj comes with a prewired control set that includes dual volume controls, master tone control, battery clip and output jack.
Specifications:
Reviews:
I wanted to replace the old worn out pickups in my BC Rich Platinum series bass (P-bass style) with some new active pickups. Did some research and came up with these EMG pickups. I had to do just a small amount of routing for the bridge pickup, but nothing major. Got them put in, and all the electronics that came with them, and put new strings on, tuned up, and had to re-set it up, and what a difference! Made it a whole new bass! If you are wanting to bring your bass back to life, or just an overhaul, consider these pickups. Easy to install, no soldering, and they sound amazing.Jesse
I went in with these as a HUGE fan of EMG pickups, but this was my first set with the "solderless" electronics. Well, I was not disappointed. They replaced the pickups/preamp in my '87 Charvel B3, which already sounded great, but some of the controls were malfunctioning. These EMGs not only improved the sound, they also have a bit more output, and range.doublediver
Love it. Had no problems installing these on a passive Warwick Corvette Standard, plug and play. Guitar's pickup slots are more rounded, so I had to remove a little piece of wood for it to fit in, but it's unnoticeable and was required only in 1 pickup. Important – This item includes also 3 knobs+electronics, there's no need to order those separately! When I made the order, no where on the page it mentioned that nor had any image of the package contents, it shown only the pickups, so I thought I redundantly ordered them separately, which doubled the cost.kofif
8. Aguilar Ag 4p/j-Hc P Bass Pickup Set
Product Details:
The ag 4p/j-hc set brings together matched precision and jazz -style pickups including aguilaras successful ag 4p-60 p-bass pickup and the recently released ag 4j-hc bridge pickup. many p/j setups have pickups that are mismatched sonically an overly deep neck pickup with puny bridge pickup tone. by way of contrast the aguilar ag 4p/j-hc is a well-balanced set that provides a flexible array of tones whether using each pickup alone or in combination. now you can get the thunderous lows of the neck pickup or the midrange cut of the bridge or both – without 60 cycle hum! like all aguilar pickups the ag 4p/j-hc set is wound in aguilaras nyc factory and is a direct replacement for 4-string fender p-bass and jazz bridge pickups. the pickups use 42 gauge formvar wire and alnico v magnets for the big dynamic tone that aguilar pickups are known for.
Specifications:
Product Dimensions | 5.4 x 2.3 x 2.8 inches |
Is Discontinued By Manufacturer | No |
Color Name | Black |
Reviews:
Wow! Once I got these pickups installed and fired up I finally got the Sound I was craving. My Fender American Ultra Precision just did not have that classic P-bass sound, in fact is was just dull, but with these pickups it has been transformed. The combination of these pickups and my Aguilar Tonehammer 700 is killer. Thanks to Andy I would never have found the sound I needed and am inspired by. He knew exactly what I was looking for. Shipping was lightning fast not to mention the deal I received! Love it!!!!
When I ordered this product. I always trusted the Agular name and know they make quality products. When I put the pickups in it was a night and day difference. Clarity, punchy lows, miss, and highs. I would recommend these pickups to anyone who wants to improve the sound of their Fender Jazz Bass.Rick G
Bought these to install into a MIM jazz bass. They sound amazing really happy I installed these into the bass.Adam H.
9. Fender Pure Vintage &74 Jazz Bass Pickup Set
Product Details:
Used in good condition fender's pure vintage '74 jazz bass pickup set delivers the punched-up midrange and shaggy low-end that undergirded countless pop, funk, soul, r&b, and rock 'n' roll records of the 1970s. pure vintage '74 pickups have a balanced vintage-style voice with plenty of bite where it matters extra snarl in the bridge and a heavy dose of thump in the neck. the old school tone emanates from period-correct manufacturing techniques, including enamel-coated magnet wire, shellac potting, cloth connector wire, and fiber bobbin construction. and, bassists at sweetwater love the focused attack and nuanced dynamic response supplied by the pure vintage '74 pickups' alnico 5 magnets. conjure the spirit of the 1970s with pure vintage '74 jazz bass pickups.
Specifications:
Active/Passive | Passive |
Magnet Material | Alnico V |
Number of Strings | 4 |
Position | Bridge, Neck |
DC Resistance | 8.3K (neck), 7.8K (bridge) |
Reviews:
I've played jazz basses for years, recently picking up a late 90s CIJ Geddy Lee Jazz. This bass is based on a 1972 Jazz. The bridge pickup was not working, so I set out to find a good set of pickups. I tried Seymore Duncan Quarter Pounders, a Mexican Standard, and a Fender Custom Shop 60s model not produced any more. By far I liked the Fender Pure Vintage 74s the best. These have a vintage sound, not too hot, with a fuller low end than the 60's custom shop, or my stock pickups in my 2011 am standard jazz (a killer jazz sound). The midrange was very punchy, not too thin, but not fat or thick enough to get lost in the mix. The top end had a bite that lends itself well to a dirt pedal to get some texture. I'm not a huge fan of the bridge pickup soloed on a 70's model jazz, it's too nasal sounding to my ears. I much prefer the 60s spacing. The '74s seem to address that to a certain extent, smoothing out some of the thin nasal bite the 70s bridge pickup is known for. Blended, the sound is full and very punchy. The set growls nicely, in an upper mid sort of way (I see this more due to the 70's bridge pickup spacing) and slapping sounds great if that's your thing. Being mostly a finger player, a fresh set of stainless steel Rounds will get a nice tone that snarls when pushed. I haven't tried flat wound strings, but I'm sure they would sound good. I've never played a 74 jazz, but the pickup set seems to be made for this bass. I think Fender nailed the sound they were looking for here. Construction was typical Fender, nothing fancy and the poles and fiber bobbins were shellac covered. I'm not a huge fan of push back cloth insulated wires, but I had no issues soldering these. So far I haven't had any issues with hum or grounding problems. These are packaged with minimal information, but a schematic was provided for soldering instructions. My one complaint was the lack of information on which pickup was bridge or neck. One was marked with a red dot ( I assumed this was the bridge pickup) but not a single written word regarding the difference. This is annoying at the least, and could be a deal breaker for some if the pickups were are placed incorrectly. Come on Fender, even a note or written mark on the pickup would have been nice. Follow through and do your homework. All complaints aside, these are well worth a try in any jazz, and definitely a home run in a 70's model jazz bass. Add to the fact you can pick these up new for under 100 bucks if you look around, these are worth a try.jamesbaghr
I needed pickups to replace some dead coils on a 1966 Jazz Bass while the originals were out getting rewound, so I bought these '64 Pure Vintage to get me by. They are giving the original coils a run for the money. They possess a bump in the upper midrange that give them the characteristic growl of a vintage Jazz Bass. I'm not certain at all that the rewound 1966 set will go back on the bass unless for resale/originality reasons.gitdoc3qwt
These are great pickups. They exceeded my expectations. They are full and rich sounding and for the price are a superb value. They're less expensive than just about any other good set of Jazz Bass pickups and cost less than having old pickups rewound. I've got active EMG's, Barts, DiMarzios, Aguilars, Fender Super 55's, Seymour Duncans and other Jazz sets in other basses and right now, I'm enjoying the sound of these the most of all.Cajon Crawdad
10. Seymour Duncan Scpb-3 Quarter Pound Single Coil P-Bass Pickup
Product Details:
The basslines scpb-3 quarter-pound is a single-coil p-bass pickup rmended for blues, classic rock, garage, heavy rock, classic rock and nu-metal. developed for the bassist who need the slammin' output of the hot but with even stronger attack. the 1/4" diameter pole pieces add more string sensitivity than the hot pickup. the basslines quarter-pound pickup delivers aggressive tonal response with strong bottom end and lots of mids. also adds tremendous tonal versatility to a single pickup electric bass.
Specifications:
Reviews:
Put one of these into my 50's Vibe Squire P-bass, and wow…what a difference! The mod was super-easy (my first ever PUP mod), and the sound is a marked improvement over the stock PUP.Higher overall volume than the stock Fender PUP, and sounds good played with a pick. It really shines for finger-style players, and I even play some slap with it in my R&B band!My Squire is now my #1 bass with this bad boy installed; I play it much more than my Carvin and Washburn (which has Bartolini soapbars). Highly recommended for upgrading your lower-end bass to a higher-end feel. Thumbs-up!Kris from Winnipeg
I bought this pickup for a Squier (by Fender) Vintage Modified Telecaster Bass to replace the stock pickup which said Duncan Designed and did not offer the sound I desire. The SCPB-3 has bite and power. Lows are punchy and defined and the mids really cut through the mix. The one I received is silk-screened with Seymour Duncan instead of Basslines, but it is the exact same model. Apparently Seymour Duncan makes these for Basslines. If you buy online it may come with one or the other names. I'm okay with either. Fantastic upgrade. I am really happy!Scottie
This pickup dropped right in the old Hagstrom 1 Kent series bass. I used the Vintage seymour duncan in the neck slot and the QP in the bridge slot. I set up a volume-tone scheme with two off-on rockers, two 250K ohm pots and 1 .047MFD cap. The warmth from this blend is incredible and the characteristics of the old hags neck has given me one sweet instrument. In the future, I may change the scheme to a volume-volume-tone setup like a P bass but for now I'm too psyched with the joy that I've found!Community User
11. Bartolini Mk5cbc-B Classic Mk Soapbar Neck 5-String Bass Pickup
Product Details:
Bartolini mk5cbc-b classic bass soapbars make you sound better, so you play better. they have a rich, deep voice with lots of high-end clarity and warmth. when you dig in, they are responsive and growly. when you pull back, they are clear and sweet. and theyll take any slapping and popping you want to give them. the classic bass series is popular with progressive, jazz, gospel and metal musicians where articulation is critical. without sacrificing low end, classic bass pickups are sweat-proof and wont crackle and thud when you touch them or hit them with the strings. if you play a wide variety of music, you know you need some pro-level pickups, but you dont want to do a big upgrade project, bartolini mk5cbc-b classic bass pickups are a great choice. they are passive and will work with your current electronics in most basses. there are different versions for neck (bass, -b) and bridge (treble, -t) so they balance well in your bass.
Specifications:
Active/Passive | Passive |
Magnet Material | Ceramic |
Number of Strings | 5 |
Position | Neck |
DC Resistance | 3.7K |
Reviews:
Bought this to replace an old and defective Bart MK1 pickup. The pup arrived quickly and was wrapped in factory packaging. Much more output over the MK1 and somewhat brighter sound. Low end has better definition. Now I find I am turning down the treble pot on my Ibanez SR500 bass.jedhi
These are great pickups. A very nice jazz bass sound. Your bass will still sound like a jazz bass only….more. Not overly bassy. Not harsh. Not in a well like sound. Nice and present. They don't bite but they do give you a nice clarity in just the right frequency across the fretboard. I'd say smooth but with a nice percussive punch. Far superior to what they send out with the MIM jazz basses and a reasonable upgrade. You really can't go wrong here.cray54dog
The Bartolini pick ups are Awesometwall-43
12. Fender Yosemite P/j Pickup Set
Product Details:
Fender yosemite p/j bass pickup set – a new generation of tone, the yosemite pj pickup set is designed for rich, authentic fender sound. this set includes a seismic split-coil precision bass middle pickup and growling jazz bass bridge pickup. alnico 5 magnets and formvar-coated wiring create an expressive, well-defined voice that’s highly musical and dynamic-it fits in the mix with ease-while shellac coating controls potentially runaway feedback without compromising response.
Specifications:
Reviews:
I put these in an American professional jazz to be able to blend without noise. I chose them because I wanted it to remain a completely Fender bass. They aren't absolutely horrible sounding, but I have decided the only way these companies should make noiseless "single coils" is by using side by side split coils. Not stacked dual coils. Splitting the coils gives good output, attitude, and a low mid bump- you know the kind that makes people love P basses. Everybody is figuring this out except Fender- the greatest guitar maker in the world. Aguilar, Dimarzio, Nordstrand, Seymour Duncan (recently), mojotone (guitar pickups), Fralin. They've all figured out the noiseless thing. I ended up with Nordstrand NJ4SE in one and Dimarzio model J in the other. Love both of my jazz basses now. I love you Fender, but get in the game with your pickups!Andrew
I don't know if this is the LATEST version of the noiseless jazz bass pickups…it is so hard to keep up with Fender as they roll out newer versions, however, this is a great replacement to older jazz bass pickups. It really as close to noise free as you can get as you solo each pickup individually. As most jazz bass players know, the single coil aspect of the jazz bass pickup is GOING to get some hum or noise unless you are playing both the neck and bridge pickups at the same time to cancel out noise. This retains the signature Fender Jazz Bass sound with great clarity with the advantage of being noise free. Highly recommended!!road-cat1
These are a special wind from Tim Shaw, the ultimate pickup guy at Fender. They are capable of perfect vintage deep bass while throwing out strong mids and super crisp, bright highs. Not super hot so you still have to work if you want overdrive distortion, which is a good thing. These have become my favorites for all my Fender builds–basses, teles, and strats.bobvarns
13. Emg J5 Active 5 String Jazz Bass Pickup Set
Product Details:
This set became an instant hit with its sweeping harmonic overtones, punch and quiet operation. this pickup set has classic jazz bass characteristics with a broader tonal frequency range that adds dimensions and clarity to your bass playing. emg's design has a very low ratio of resistance to inductance, which increases the low end response, while the radiused ceramic bar magnet ensures the tone keeps a tight mid-range punch with dynamic high end response. whether you play fretted or fretless, live or in the studio, you'll get an incredibly full sound with these bass pickups.
Specifications:
Magnetic material | Ceramic |
Cap colour | Black |
Active Pickup System | Yes |
Wiring | pre wired |
Position | Bridge, Neck |
Reviews:
I have been a bass player for several churches, and continue to do so now on a weekly basis. I played bass in several church events and fundraisers aswell, but never really got the low-end and punch from my bass that I wanted. It always seemed a little too shallow, and behind the music in volume. I finally invested in an active set to replace the passive stock pickups, and I couldn't be happier (I also invested in a nice bass-booster pedal, which is phenomenal). I bring my 5-String SX Vintage Series Bass equipped with these EMGs every Sunday now, and the tone could not be more impressive. I recently bought a 4-String P-Bass Style Fretless for a more wide-range of sounds, and it won't be long before I stick some EMGs on it aswell. Also on a side note, running these EMGs through a nice Ampeg Bass amp, is a bass dream come true.Shawn
I bought this J5 set to fit to my 5 string jazz that I had previously modified in 1996 with a set of emg pick ups. Unfortunately, at that time only standard 4 string pick ups were available and although the string spacing was within tolerance and the bass sounded great the pick ups were undersized and the install never looked tidy. This J5 set is a direct replacement for the original pick ups in a 1996 USA Fender Jazz Standard 5 string.
14. Dimarzio Dp127 Split P Replacement Pickup For Fender P Bass Black
Product Details:
Widen the sound of your gear with a split p pickup. each half of this unique double-blade p-style pickup is a complete humbucker. split p pickups are eq’d to expand the range of your bass by extending both low- and high-end response: a great way to get a broader contemporary sound from mid-rangy one-pickup-in-the-middle basses. the double-blade design adds snap for crisp attack and emphasizes cool overtones for big, smooth tone. blade pole pieces also make the split p very sensitive to finger- and pick-attack. notes seem to ring longer, especially in the upper registers, as the pickup “hears” the decaying note practically down to a whisper. recommended for middle position the split p ability to reproduce both subtle dynamics and the full range of electric bass frequencies is particularly useful with fretless basses and modern bass amps. biamping will demonstrate this pickups ability to reproduce top end, but the broad magnetic window of the dual-blade design enables the highs to stay fat and full.
Specifications:
DC Resistance | 19.16 K |
Active Pickup System | No |
Wiring | 4-Conductor |
Position | Neck |
Reviews:
These were installed in a '98 American Standard. Visually, the white pickups in a white pickguard, with black blades and adjustment screws looks really snazzy. The pickups come well protected in a plastic case and foam. UPS beat up the box, but inside all was well. Word of warning: these did not come with springs for me, and my stock pickups had expansion foam on the bottoms to act as springs, so I had to snag some from another guitar (very odd choice, Fender). The pickups are "potted" with hot melt glue entirely through, and are 2 wire each, with internal wiring. Each pickup is 10k resistance (as much as both stock Fender pickups together). The instructions mention to put the pickups in series, making for 20k resistance. It's a bit high, but the sound from that is amazing. I have 250k pots, with stock ceramic cap in the bass. These do not sound like a low-midrange boomy Precision…these sound like a mildly compressed, EQ'd bass (playing through a Champ 600 wired to an EV 15" cabinet). These are extremely responsive, "punchy," and have excellent sustain. Impressive is the least to be said. They are deep, rumbling, with good midrange balance, and if the tone is left wide open, they have a very neutral, almost singing tone quality. Chording is superb, and high strings are very loud now. The string on my bass have been in use for nearly 10 years. They've been cleaned, but without breaking, I've seen no reason to replace. On the old pickups they sounded a bit dead. The new pickups almost sound like new strings were installed. Bottom line: I have not been impressed with a pickup in some time. These are all they claim to be, and much more. Do your Precision a favor, and install these. You can still get the "vintage" sound with some EQ tweaking, but these are a much more well-rounded set, and for the price…it's a win.UnexplodedCow-a2i6_
I have had this pickup installed in a Frankenstein P-bass for a while. I had a Kramer 700ST bass, and it was P/J with the Spector pickups. I bought a Fender MIM body made from Alder and swapped the Kramer neck onto it. I had one of these from another project and used this pickup. Although the pickup itself sounds great, I don't find it as versatile as others do. I currently have it wired in parallel with 1M CTS pots and a no-load tone pot with a 0.047 uF cap, and I still find the treble extremely lacking. With a ceramic magnet, I expected it to have as many highs as an EMG HZ, but it doesn't. I've used Stainless Steel hex-core strings and the pickup close, and I still have to crank the treble to get any bite out of it. There are definitely a lot more low-mids, however, which may be what is causing the issue with a perceived lack of treble. The Spector P pickup had more bite than this DP127 does in my opinion. Also, I think the DP127 has way too much output for a single middle pickup configuration–it can get muddy real fast, and I'm having to readjust my settings when switching basses on stage. I think an Alnico II magnet rather than ceramic would make this pickup much more versatile than it really is. I don't feel the pickup has as modern of a bass tone as advertised, simply because it lacks a lot of high content even with 1M pots. If I was using it with a J-pickup that had a similar output, I would probably like it more, but I'm not real happy with it as a single-pickup config.Isher
I have owned my 77' Precision since day one. I installed the cream Dimarzio PAF's in Feb 80 and have loved the sound of my bass ever since. I read all the great reviews and decided it was time, after 34 years , to replace the pickups with the DP 127 model. WOW,,what a difference. My guitar player noticed right away the lows and the extra treble edge. My tone pot has never had such range. It will take a bit to get used to the new extra tonal qualities of my bass, but It will be time well spent enjoying getting revived by these pickups. Its as if I was 25 again and got a new bass. I recommend these to anyone looking to enhance the sound of their Precision or any other bass needing a "sound lift". I look forward to playing these pickups for the next 34 years. Wiring was easy and the instructions were simple to follow. The only downside is that Dimarzio should have an online warranty registration option instead of snail mail only. Seems to have the Dimarzio quality I have come to expect. Forthe price these pickups are worth every penny and then some.
15. Fishman Fluence Bass 4-String Pickup Soapbar Black
Product Details:
Four powerful voices. tough and ready to tour. the fishman fluence 4-string bass pickup in black is an explosive pick up system born and raised in the usa. the fluence 4-string pickup provides four separate voicing options to liven up your tone shaping. the first voice is the humbucker classic. the high active output. full, round, and with expressive articulation and impressive dynamics. the second, a crisp, clean, liquid tone which provides all the vibrancy you've wanted without the plinky tone that can ruin the overall sound. voice three is a mid flat option. full of dynamics across the frequency. expand your tonal palette with the powerful fluence pickups.
Specifications:
Voice 2 Mid-Cut | 7kHz w/500Hz mid-scoop |
Voice 2 Mid-Flat | 7kHz w/mid-flat |
MAGNETIC MATERIAL | Ceramic VIII |
MAGNETIC CIRCUIT | Dual bar magnets |
GAUSS STRENGTH | 100 gauss strength at string |
POLE SPACING | 49 mm |
OUTPUT IMPEDANCE | 9.4k |
CURRENT DRAW | 3.5mA per pickup |
BATTERY | 9-18V battery or optional rechargeble battery pack |
BATTERY LIFE | Single pickup plus 2-band EQ – Up to 110 hours |
Reviews:
Overall: These have a bottom end growl like no other pickups I've played, very touch and attack sensitive, no matter how low I tune there is no mud, the neck pickup is the best I've ever played , fluid , smooth with definition , I play Duncan Jupiter's and they kick ass , the Fishmans are easily on par with them with a growling voice I've never heard from a passive pickup , I like EMG's but the Fishmans are hand's down better. Installation will be a bit frustrating for first timers and novices , I installed them in 2&1/2hrs That included modifying my Epiphone Les Paul Custom Special , the pot holes , were too small as was the input jack hole , I did have to order Long Shaft pots as the included pots are short shafts , If you like EMG's you'll love these. I gave the fetures a low score because they should make them plug and play at this price.Dennis
These pickups are amazing for someone who wants to run with one bass and wants pickup options. The different voicings are truly different and can change the sound quite well, also considering they can be coil split. These are perfect for the guy who has one bass or wants to use one bass and is a session guy. The voicings and ease of change on the fly make it ideal for studio work. I would say though, if there's a specific tonal sound you are going for, I would buy the pickups that beat give you that tonal sound. Are there better single coil jazz bass pickups? Yes. Are there better active soapbar pickups out there? Yes and no, depending on what you like. But what this does is give you very good pickup sounds for the different styles and voicings it offers, and pretty much puts 6 basses into one bass (if you consider the coil splitting). If you already own multiple basses, this may not be for you as it may not add to your Arsenal unless you're looking for a singular bass to travel with. But if you own a single bass and are wanting more tonal options, this is the way to go. One thing to note, I did have to route out just a little bit the pickup cavities in my Jackson JS3VQ bass, so do check your pickup cavity size. I didn't need to remove much though and they fit.Matthew P.
I just installed these in my baritone Viper tuned to DropG and hoooolly ***!! I expected nice articulation and clarity but I didn't think they'd sound THIS good. These are truly next-level and I don't think anything else comes close. The lows are just nasty, the tightness, bite, the attack…it's just drool-worthy and I can't put the guitar down. The definition is consistent across every string but nothing ever sounds harsh or treble-y. Most 'metal' pickups are all about output and I've never understood that. Too hot, too boomy, too compressed, etc. Both voices are extremely useful and the neck never gets muddy. Cleans are nice and flat, nothing in the EQ is 'boosted' so it's the perfect platform for layering effects. I was skeptical about all the hype and rave reviews but I stand humbly corrected. It's all true and I can't recommend the Fishman Fluence Moderns enough. They are extraordinary.Cody
16. Dimarzio Dp149 Ultra Jazz Bass Pickup Set Black
Product Details:
Specifications:
Product Dimensions | 2.3 x 4.2 x 2.3 inches |
Is Discontinued By Manufacturer | No |
Color Name | Black |
Reviews:
A lot of people seemed to go with the hype from Aguilar,EMG, Nordstrand and many others. What they don't know is that the most expensive pickups aren't sign of the best tone you can get. These Dimarzio Ultra Jazz pickups are seriously the best Jazz pickups not only for the money but for the beautiful tones you can get out of it. I'm really impressed with the nuances I can get out from these pups. I've played and owned Seymour Duncan, EMG, Fender,Bartolini and many others and my honest opinion these Ultra Jazz pickups are the best of all. Before you go spend $150+ on a set of overrated pickups, give these a try and you will see what these pickups are really about.805musician
These pickups are amazing. I purchased them for my 08 mim Jazz. What a difference. I needed to do other modifications to the bass while installing, so the tone isn't even at it's fullest yet. And it's WAY better than stock now. It's only going to get better as it settles in. And the best part is…. Totally SILENT! I also wired them up for series/parallel swap and phase reversal. the pickups came with a color diagram so that you can use push/pull pots to accomplish all the switching options. I now have clear highs, and punchy.chunky lows. The mids are not muddy either. And that takes some getting used to. Now my bass is like a new toy. I love it!
I am a longtime guitarist and have recently picked up the bass. Bought a nice MIM J bass, but the noisy PUPs were killing me. Talked to a bunch of guitar techs and they all said the best bang for the buck are these Dimarzios. Installation was a breeze…I could have done it, but my tech only charged twenty and; now that I have seen it done I would do it in the future myself. AND they sound great….changed the whole nature of the instrument and my playing. If you do one upgrade, this is it…really noticeable and very easy..Byron123
17. Fishman Fluence 4 String Bass Soapbar Pickup Set – Black
Product Details:
Four powerful voices. tough and ready to tour. the fishman fluence 4-string bass pickup in black is an explosive pick up system born and raised in the usa. the fluence 4-string pickup provides four separate voicing options to liven up your tone shaping. the first voice is the humbucker classic. the high active output. full, round, and with expressive articulation and impressive dynamics. the second, a crisp, clean, liquid tone which provides all the vibrancy you've wanted without the plinky tone that can ruin the overall sound. voice three is a mid flat option. full of dynamics across the frequency. expand your tonal palette with the powerful fluence pickups.
Specifications:
Voice 2 Mid-Cut | 7kHz w/500Hz mid-scoop |
Voice 2 Mid-Flat | 7kHz w/mid-flat |
MAGNETIC MATERIAL | Ceramic VIII |
MAGNETIC CIRCUIT | Dual bar magnets |
GAUSS STRENGTH | 100 gauss strength at string |
POLE SPACING | 49 mm |
OUTPUT IMPEDANCE | 9.4k |
CURRENT DRAW | 3.5mA per pickup |
BATTERY | 9-18V battery or optional rechargeble battery pack |
BATTERY LIFE | Two pickups plus 2-band EQ – Up to 60 hours |
Reviews:
Overall: These have a bottom end growl like no other pickups I've played, very touch and attack sensitive, no matter how low I tune there is no mud, the neck pickup is the best I've ever played , fluid , smooth with definition , I play Duncan Jupiter's and they kick ass , the Fishmans are easily on par with them with a growling voice I've never heard from a passive pickup , I like EMG's but the Fishmans are hand's down better. Installation will be a bit frustrating for first timers and novices , I installed them in 2&1/2hrs That included modifying my Epiphone Les Paul Custom Special , the pot holes , were too small as was the input jack hole , I did have to order Long Shaft pots as the included pots are short shafts , If you like EMG's you'll love these. I gave the fetures a low score because they should make them plug and play at this price.Dennis
These pickups are amazing for someone who wants to run with one bass and wants pickup options. The different voicings are truly different and can change the sound quite well, also considering they can be coil split. These are perfect for the guy who has one bass or wants to use one bass and is a session guy. The voicings and ease of change on the fly make it ideal for studio work. I would say though, if there's a specific tonal sound you are going for, I would buy the pickups that beat give you that tonal sound. Are there better single coil jazz bass pickups? Yes. Are there better active soapbar pickups out there? Yes and no, depending on what you like. But what this does is give you very good pickup sounds for the different styles and voicings it offers, and pretty much puts 6 basses into one bass (if you consider the coil splitting). If you already own multiple basses, this may not be for you as it may not add to your Arsenal unless you're looking for a singular bass to travel with. But if you own a single bass and are wanting more tonal options, this is the way to go. One thing to note, I did have to route out just a little bit the pickup cavities in my Jackson JS3VQ bass, so do check your pickup cavity size. I didn't need to remove much though and they fit.Matthew P.
I just installed these in my baritone Viper tuned to DropG and hoooolly ***!! I expected nice articulation and clarity but I didn't think they'd sound THIS good. These are truly next-level and I don't think anything else comes close. The lows are just nasty, the tightness, bite, the attack…it's just drool-worthy and I can't put the guitar down. The definition is consistent across every string but nothing ever sounds harsh or treble-y. Most 'metal' pickups are all about output and I've never understood that. Too hot, too boomy, too compressed, etc. Both voices are extremely useful and the neck never gets muddy. Cleans are nice and flat, nothing in the EQ is 'boosted' so it's the perfect platform for layering effects. I was skeptical about all the hype and rave reviews but I stand humbly corrected. It's all true and I can't recommend the Fishman Fluence Moderns enough. They are extraordinary.Cody
18. Fender Custom Shop '60s Jazz Bass Pickup Set
Product Details:
I ve had these in for a few years, decided to give dimarzios a try instead. these provide a very round and balanced tone. they ve been professionally uninstalled by my trusted local guitar tech. wire cover cloths still have plenty of wax on them and the pickup covers are clean. i placed the neck pickup into the upper section of the package.
Specifications:
Reviews:
If you want amazing tone from your Fender Jazz Bass, you just can't go wrong with this set of pickups. The bridge pickup gives you more output, more growl & honk, and the neck pickup is amazing as well. No noise issues (not "silent," but no issues at all). I mostly play jazz and blues, and absolutely love these pickups. A huge upgrade from the MIM Jazz Bass pickups. Go for it!
Got these to upgrade my Fender MIM Jazz and sound more like the cool 60's grooves we all know and love. Very nice, clear and musical. Lots of bass and I can shape the treble and mids with my EQ as much as one could dream. Tonewise, these are everything I hoped. My "but" is that the pole pieces are flat, compared to my strings that arch to match the action from bridge through neck and nut, leaving my A and D strings a bit farther from the flat pickups than the E and G strings, so those two outside strings are noticeably louder than the two inside strings. I was surprised by the difference, as my previous pickups, while overall tonally inferior, had staggered poles to better match those distances, thus produced much more even volume across the strings.Kevin
These pups are a great replacement option for any midrange priced Jazz Bass. If you have a nice broken in & straight necked MIM, MIJ/CIJ, or a Highway 1 Jazz these are an instant and effective upgrade. I replaced the Japanese pups in my MIJ 75 reissue w/ this set and it made a great difference. I was very happy with my purchase to say the least. The sets dynamics allowed for both tonal diversity, and ease of use. You can dial in what you need (tone/vol. wise) quicker because the controls loose that extreme sensitivity associated with cheeaper pups. The neck pickup has great pressence and low end but the star of the set in my opinion is the bridge/lead pup. The lead pup does wonders for midrange grit. You can get it to sound fairly dirty which is perfect for any rock bassist wrecking w/ an old Ampeg rig behind them. I generally play with the bridge @ max, 3/4 of the neck, and max the master tone's bright side out. I generally play a lot of rock though. When I play country I use the neck pup to my advantage. Cranking the neck pup allows more volume for low end, a warmer tonal range, and generally it brings out your finger/pick attack. It all depends on where you rest a thumb or dig in.One thing that differs these pickups from other passive Jazz pups is the drop in vol./output level. This is trouble for those that already have trouble cutting through a mix. It is a double edge sword. I actually enjoyed the volume cut because it allowed me to crank my gain, and drive my tubes harder. The craftsmanship was great. The solder points were strong and neat. The wires were jacketed well and had good length to them… long enough for a easy connection yet short enough to avoid a mess under your pickguard. They were a breeze to install. I just reconnected the new pups wires as I disassembled the old ones. I strongly recommened doing it step by step like this. If you disconnect everything and forget what goes where all you have is a crummy drawing for directions. Also don't forget to take note of which pick up is the bridge and which is the neck. I've seen and heard people dog a new set of pickups because they flopped the order in the set. I also suggest following the fender owners manuel guidelines on pick up height and positioning. This will improve tone and precision with intonation.All in all you have to hear them for yourself but they are one the best upgrades you can buy for a midrange priced jazz. I wish they sold individual bridge sets so i could put one in my precision bass after some work. That would be great.
19. Aguilar Ag 4p-60 Bass Guitar Pickup
Product Details:
The fender precision bass provided the big, round tone found in almost every hit song from the '60s. to create a pickup with that much vibe and feel, aguilar studied the pickups from aguilar president dave boonshofts personal 1963 and 64 precision basses. the ag 4, 5, and 6p-60 pickups use all the period-correct parts, including heavy formvar wire and alnico v magnets. these pickups have just the right amount of mid-range nose to cut through a loud rock band and give all the deep support one would expect from a great 60s p-bass pickup. the ag 4p-60 is direct replacement for precision bass style bassesplease see the specs section below for the ag 5, 5cl, and 6p-60 dimensions. the ag 5p-60cl has a smaller cover and accepts a narrower, 17.5mm18.5mm string spacing.
Specifications:
Active/Passive | Passive |
Magnet Material | Alnico |
Number of Strings | 4 |
Position | Middle |
Reviews:
I replaced the pickups and circuitry of a new Squier Classic Vibe '60's Precision Bass, first with EMG pickup (Did NOT like the EMG) then the Aguilar, after seeing reviews. I also replaced pots with Bourns 250k Linear for Vol. and Bourns 250k Audio for Tone, installing a 0.068mf capacitor on the Tone pot. Terrific combination. There is a fine range of tone with these pickups, nicely governed by the Bourns. Really lovely deep clear growl on the low E, so it's a pleasure to be doing scales and riffs down there. The .068mf cap filters off the thinner, snappy upper string sound, so there is more useable range since the A, D and G don't sound tooo thin and barky on the low frets. That single, inexpensive capacitor change makes a fine difference! Oh, also installed a Fender higher-mass bridge, as seen in photo.Andrew G.
Aguilar 4P-60 4-String P Bass 60's – High quality of pickup. class A . I installed it on my Fender P bass made in Japan and you can hear the difference straight away, bright and load of mid with full open tone, and if you close the tone old Motown sound that take you right to old funk club. this is very good replacement for MIJ or MIM bass or take every "on the budget" bass and make it high standard bass (or if you build you own bass kind of guy or girl) . this is top a product from top A company that give you 120% value for you money.kinkyroy2
It is just the sound I wanted.. Great fat sound with nice high end and a good " Nose" sound.dijk_79
20. Emg 35dc Dual Coil 4-String Active Bass Pickup Black
Product Details:
The emg 35dc is a powerful modern sounding humbucker for bass players looking to cut through a big loud mix. the two coils loaded with ceramic bar magnets provide punch and clarity with a crisp top end and plenty of output. this extremely versatile pickup gives players a sonic range that covers the cleanest highs right down to the dirtiest, growling lows.this model uses an extended housing that is 3.5 inches (89mm). new old stock.
Specifications:
Logo Color | Silver |
Resonant Frequency (KHz) | 4.3 |
Output Impedance (Kohm) | 2 |
Battery Life (Hours) | 1200 |
Maximum Supply (Volts DC) | 27 |
Reviews:
I recently purchased a Stuart Spector Legend Classic 5 string bass on Ebay. It came with EMG-Hz pick-ups. I wasn't satisfied with the tone and volume available through those pick ups. The Legend is a low-end Spector and it list for less than $900. I own a Spector Euro5LX neck-through which list around $2800. I had two EMG-40DC's professionally installed. The difference is remarkable. The cheaper bolt-on neck legend has a sound that is comparable to the Euro LX. I played the Legend on the gig this past weekend and the sound was awesome. Remarkable tone; even the low B was clear and fat. The EMG-40DC pick ups will turn an ordinary 5 string instrument into an extraordinary one. If you own a inexpensive instrument try replacing the stock picks with EMG's. You will not regret it.P. Muzi Branch
I've used EMGs before in the guitars I make, so I know the quality of the sound but when I made my latest bass, I didn't have the cash to fit EMGs and had to put up with inferior pickups for a while. Although the previous pickups were good, fitting these have been a great improvement in depth of sound, clarity and headroom. EMG recommend using 2x 9v batteries to increase headroom and I would have done this but my bass is a small headless one with no body space for 2 battery cases. Despite this the result has been excellent and well worth the money.mcveigh7tx
Related posts:
- Bass Guitar Action Height For Sale (2024 Update)
- Bass Guitar Pick Ups For Sale (2023 Update)
- Bass Guitar Pickup Height For Sale (2024 Update)
- Bass Guitar Wall Mount For Sale (2024 Update)
- Bass Or Bass Guitar For Sale (2024 Update)
- Best Bass Guitar Picks (2024 Update)
- Best Pickup For Resonator Guitar (2024 Update)
- Guitar Wah Wah Pedal For Sale (2024 Update)
- Seven String Ibanez Guitar For Sale (2024 Update)
- Wireless Amp For Guitar For Sale (2024 Update)