Are you looking for the Guitar Pedal Board With Power Supply? If so, you’ve come to the right place.
Choosing the Guitar Pedal Board With Power Supply can be difficult as there are so many considerations, such as BOSS, SKB, Pedaltrain, Gator Cases, Temple Audio Design, ammoon. We have done a lot of research to find the top 20 Guitar Pedal Board With Power Supply available.
The average cost is $222.29. Sold comparable range in price from a low of $17.99 to a high of $519.99.
Based on the research we did, we think Voodoo Lab Dingbat Pedalboard Power Package – Small with Pedal Power 2 Plus is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Guitar Pedal Board With Power Supply (20 Sellers)
Product Image |
Product Name |
Features |
Check Price |
|
|
-
- Lightweight american 6061-t6 aircraft-grade aluminum chassis.
- Pedalboard surface: 18" x 7.75" (457mm x 197mm).
- Mounting brackets for easy installation of voodoo lab pedal power power supply.
|
|
|
|
-
- Integrated 1.7a power supply, includes switching adaptor and daisy chain cabling
- Fits up to 12 pedals
- Heavy-duty case
|
|
|
|
-
- Guitar effects pedal power supply with 5 x 9v dc isolated outputs at 120ma each (600 ma max output)
- Heavy-duty all metal enclosure with slotted vents for heat dissipation
- Ac power input with switchable voltage between 115v/230v (50hz-60hz) for international use
|
|
|
|
-
- Precision-machined anodized aluminum chassis
- Integrated cable routing and management system
- Universal power-supply mounting bracket
|
|
|
|
-
- Engineered to operate at a low voltage of 18 v for an efficient performance
- Designed with 8 isolated outputs to connect multiple pedalboards simultaneously
- The frequency range of 50 hz to 60 hz delivers enhanced power supply easily
|
|
|
|
-
- Lightweight american 6061-t6 aircraft-grade aluminum chassis
- Pedalboard surface size: 25.75" x 15.75"
- 8 isolated 500ma dc outputs
|
|
|
|
-
- With pedal power 3 power supply gig bag
- 22-inches x 13.50-inches
- Aluminum pedalboard
|
|
|
|
-
- Lightweight american 6061-t6 aircraft-grade aluminum chassis
- Pedalboard surface: 18" x 7.75"
- 8 isolated 9v 500ma dc outputs
|
|
|
|
-
- Dingbat series
- Power supply
|
|
|
-
-
-
4.6
-
Reviewers Noted:
Portability
|
-
- Product details
- Input led red when connected to 12v dc input
- Output leds 8 leds light when powering pedal input
|
|
|
|
-
- Each dingbat pedalboard includes a heavy-duty tour grade padded gig bag that features premium ykk zipper hardware.
- Lightweight american 6061-t6 aircraft-grade aluminum chassis.
- Pedal power 3 plus power supply pre-mounted.
|
|
|
|
-
- Short circuit protection helps keep it safe under power fluctuations
- Crafted with aluminum material to make the housing durable and sturdy
- Designed with 4 mounting holes for added convenience in its installation
|
|
|
|
-
- 10 isolated outputs: 4 – 9v 100ma,3 – 9v 300ma,1 – 9v 500ma,1 – 12v 300ma,1 – 18v 100ma.
- Short-circuit protection for stable and safe power supply,and short circuit in one channel won't affect other channels' function.
- This pedalboard power supply is made of high quality aluminum alloy,inbuilt usb charging for iphone ipad,mobile phone etc.
|
|
|
|
-
- Zipper closure allows quick access to valuables
- Uv protection helps safeguard this platform against sunrays
- 250 ma output voltage helps provide constant power
|
|
|
|
-
- Crafted from lightweight 6061-t6 aircraft-grade aluminum
- Pedalboard surface size: 18” x 10”
- 8 isolated 500ma dc outputs
|
|
|
|
-
- 6 way 9v 100ma.
- Puerto rico, virgin island, hawaii, guam, alaska orders welcomed here!
|
|
|
|
-
- Mountable design lets you attach this pedalboard to any wall
- Its large design helps you place multiple pedal units
- Hook-and-loop fasteners lets you mount the pedal conveniently to the board
|
|
|
|
-
- Removable shoulder strap lets you carry this bag conveniently
- Aluminum build helps safeguard the chassis from corrosion
- Uv-resistant properties help protect the cables from excessive heat damage
|
|
|
|
-
- Mobile rechargeable power station for effect pedals.
- Can also be used to charge smartphones and other usb devices.
- 3 high-performance li-ion batteries.
|
|
|
|
-
- 8 connections 9 v each with 150 ma
- 2 connections 18 v each with 400 ma
- Total power: 2000 ma
|
|
Features:
- Lightweight american 6061-t6 aircraft-grade aluminum chassis.
- Pedalboard surface: 18" x 7.75" (457mm x 197mm).
- Mounting brackets for easy installation of voodoo lab pedal power power supply.
Features:
- Integrated 1.7a power supply, includes switching adaptor and daisy chain cabling
- Fits up to 12 pedals
- Heavy-duty case
Features:
- Guitar effects pedal power supply with 5 x 9v dc isolated outputs at 120ma each (600 ma max output)
- Heavy-duty all metal enclosure with slotted vents for heat dissipation
- Ac power input with switchable voltage between 115v/230v (50hz-60hz) for international use
Features:
- Precision-machined anodized aluminum chassis
- Integrated cable routing and management system
- Universal power-supply mounting bracket
Features:
- Engineered to operate at a low voltage of 18 v for an efficient performance
- Designed with 8 isolated outputs to connect multiple pedalboards simultaneously
- The frequency range of 50 hz to 60 hz delivers enhanced power supply easily
Features:
- Lightweight american 6061-t6 aircraft-grade aluminum chassis
- Pedalboard surface size: 25.75" x 15.75"
- 8 isolated 500ma dc outputs
Features:
- With pedal power 3 power supply gig bag
- 22-inches x 13.50-inches
- Aluminum pedalboard
Features:
- Lightweight american 6061-t6 aircraft-grade aluminum chassis
- Pedalboard surface: 18" x 7.75"
- 8 isolated 9v 500ma dc outputs
Features:
- Dingbat series
- Power supply
Reviewers Noted:
Portability
Features:
- Product details
- Input led red when connected to 12v dc input
- Output leds 8 leds light when powering pedal input
Features:
- Each dingbat pedalboard includes a heavy-duty tour grade padded gig bag that features premium ykk zipper hardware.
- Lightweight american 6061-t6 aircraft-grade aluminum chassis.
- Pedal power 3 plus power supply pre-mounted.
Features:
- Short circuit protection helps keep it safe under power fluctuations
- Crafted with aluminum material to make the housing durable and sturdy
- Designed with 4 mounting holes for added convenience in its installation
Features:
- 10 isolated outputs: 4 – 9v 100ma,3 – 9v 300ma,1 – 9v 500ma,1 – 12v 300ma,1 – 18v 100ma.
- Short-circuit protection for stable and safe power supply,and short circuit in one channel won't affect other channels' function.
- This pedalboard power supply is made of high quality aluminum alloy,inbuilt usb charging for iphone ipad,mobile phone etc.
Features:
- Zipper closure allows quick access to valuables
- Uv protection helps safeguard this platform against sunrays
- 250 ma output voltage helps provide constant power
Features:
- Crafted from lightweight 6061-t6 aircraft-grade aluminum
- Pedalboard surface size: 18” x 10”
- 8 isolated 500ma dc outputs
Features:
- 6 way 9v 100ma.
- Puerto rico, virgin island, hawaii, guam, alaska orders welcomed here!
Features:
- Mountable design lets you attach this pedalboard to any wall
- Its large design helps you place multiple pedal units
- Hook-and-loop fasteners lets you mount the pedal conveniently to the board
Features:
- Removable shoulder strap lets you carry this bag conveniently
- Aluminum build helps safeguard the chassis from corrosion
- Uv-resistant properties help protect the cables from excessive heat damage
Features:
- Mobile rechargeable power station for effect pedals.
- Can also be used to charge smartphones and other usb devices.
- 3 high-performance li-ion batteries.
Features:
- 8 connections 9 v each with 150 ma
- 2 connections 18 v each with 400 ma
- Total power: 2000 ma
1. Voodoo Lab Dingbat Pedalboard Power Package – Small With Pedal Power 2 Plus
Product Details:
Given the pandemic, i didn t gig too much (maybe 4 times) out with this board. i almost immediately outgrew it and bought a larger one and so i m looking to part ways. it s also equipped with the voodoo lab dingus module for further organizing your cable runs.i ll include velcro with the board. the innovative patent pending design of a voodoo lab dingbat pedalboard delivers a rugged, lightweight platform for organizing your pedals and keeping cables neatly tucked away and out of view. crafted from superior american 6061-t6 aircraft-grade aluminum, each pedalboard is made in sonoma county, california and includes a tour ready gig bag.at 18" x 7-3/4", the small dingbat is an ideal size to assemble a compact and lightweight board with 3 to 5 essential effects. hook-and-loop tape is provided to attach pedals, also zip ties and 4-way tie mounts to secure cabling underneath.
Specifications:
Dimensions (W x D) |
457 x 197 mm |
Number Of Effects |
4 |
Incl. power supply |
Yes |
Incl. Gigbag |
Yes |
Incl. Case |
No |
Reviews:
Overall: Very happy with this purchase. I don’t use a ton of pedals so the 4+4 power supply shouldnbe plenty. Smells of quality and built to last. Plenty of space for MXR wah, Fender Marine Reverb, Radial ABY, Boss Tuner and Supro Tremolo footswitch. Will add an Overdrive Boost and a Leslie pedal. Good documentation, leads and Velcro. Bag is very hardy. Terrific value package IMHO. Haven’t needed to use support but email warranty followup indicates Voodoo Labs wants to do right by its customers.Matthew
I was looking for a compact board for just a few pedals. I was looking at the Pedaltrain Nano and the MONO Lite because I wanted something that could fit in my MONO Guitar Tick. As much as I like Pedaltrain boards, their bags are junk and nice padded bags can cost as much as the board they carry. While the Dingbat Small is a bit bigger than the PT Nano, it came with what appeared to be (and is) a nice padded soft case at a price equivalent to the MONO Lite Plus without the case. Construction is very similar to the MONO: a bent aluminum sheet with holes for routing cables. One nice feature of the Dingbat is that it is built to accommodate a wide range of Voodoo Lab power supplies. Since I happened to have a VL 4×4 on hand, that was both convenient and cost-saving for me. Since I've made such a big deal of how a padded bag is included, I'll talk a little about it. It's form-fitting but has a good bit of extra space so you can stash extra goodies on top of or beneath the board when it's in the bag. With that extra space, it has velcro straps that help keep the board from shifting while in the case. Padding is quite good. It's no flight case but it'll help protect your board when thrown in the back of a car. The outer covering isn't quite as indestructible as on my MONO cases but I expect it to hold up for some time. Voodoo Lab does sell replacement cases so if I wear this one out, at least I can get another.Alec
Just finished setting up my Dingbat Large pedalboard and overall, I am satisfied with the product. I own a couple of Pedaltrain boards as well, so I was able to compare them to the Dingbat. I am happy with both brands. The boards are well-made, sturdy and provide practical solutions for using multiple pedals. There is one major difference (in my opinion) that distinguishes them. Pedaltrain boards have slots that span the entire length of the board making it very easy to set up your cables. However, this design sometimes makes it a little more challenging securing certain pedals with velcro because there may be less surface area. On the other hand, the Voodoo Lab Dingbat has much smaller slots for setting up your cables. I found this to be a bit more challenging because many of the holes are covered up by your pedals (especially larger pedals), so I had to be more creative in figuring out where my cables should go. However, this was certainly not a "deal killer." It just required a little more thought. Also, the Dingbat has more surface area so my smaller pedals are generally more secure. Both brands offer good soft cases. But I like the fact that the Dingbat case has internal straps that provide more secure packaging for traveling with your rig. I'm happy with both brands and recommend both.Breukelenman
2. Behringer Pb1000 Pedal Board With Power Supply – Fits Up To 12
Product Details:
The behringer pb1000 universal effects pedal floor board is an ultra-compact and lightweight pedal board for transporting up to 12 effects pedals. high-quality components and exceptionally rugged construction ensure long life. this pedal board makes hooking up twelve 2.5" x 4.5" pedals as easy as hooking up just one (if you're using pedals that aren't 2.5" x 4.5", the snug foam padding can be cut to accommodate pedals of varying shapes). with 1/4" patch cables, pedals are connected to one another, ready to pass signal even when transporting. it also comes with 1 x 12 daisy chain cabling so that when you plug in the 1.7 a power adapter, all pedals receive power. the ins and outs connect your guitar, bass or keyboard to the single 1/4" input in the upper right corner of the board. a pair of 1/4" from effects jacks in the upper left corner allows to connect stereo effects and two 1/4" output to amp jacks send a left and right stereo signal to up to two amps.
Specifications:
Power Supply |
Integrated 1.7A power supply |
Included Accessories |
switching adaptor and daisy chain cabling |
Pedal Capacity |
Up to 12 pedals |
Weight |
11.8 lbs |
Reviews:
Good price , good service.Reviewed by Andertons Music Co.
If you are like me and like to use lots of pedals, this is an excellent board at an excellent price. Very solid and easy to transport. The closing mechanism is not the best but it does the job once you get used to it. In the configuration on my picture I go from the top row to the bottom row, right to left in both cases so I can have my looper in a practical position but you could also do bottom first and top second. There is one long wire to go from the end of a row to the beginning of the next row, one medium wire to start or end the chain and enough short wires to connect all the pedals. The quality of the cables might not be the best as I had one that became faulty on another Behringer board (the PB600 with 6 pedals) but they are easily replaceable if they fail. There is also an extra power in the chain (so totally 13) so you could add an extra pedal at the top right or a cry baby on the floor outside.michel_decary
For the money, this is a good product. Holds a bunch of pedals but the mounting security could be better. Construction is not heavy duty but sufficient. I recommend this product. Unlike some other musicians, I endorse Behringer products.afbbaumgart
3. Gator Gtr-Pwr-5 Pedal Board Power Supply With 5 Isolated Outputs
Product Details:
With five dc-isolated 9v power outputs, the gator gtr-pwr-5 is a smart solution for providing reliable, low-noise power to your effects pedalboard. each isolated outlet can provide up to 120ma, with a total of 600ma available for all outlets. its rugged metal enclosure is vented for superior heat dissipation, and integrated mounting slots allow for direct mounting to your pedalboard. five standard dc power cables and one polarity inverter cable are included to connect your pedals. for smaller pedalboards, this pedalboard power supply is definitely recommended.
Reviews:
Simple and effective for practice…quality made.digsmithd57
Nice little unit. Does the job for someone that doesn't have a lot of pedals to power. It looks nice within alligator pattern metal box. Nice and sturdy. Connectors are all nice and tight. Good valuekenweasel
Works great, no noise !!abrwn327
4. Fender Professional Pedal Board With Bag – Small
Product Details:
The fender professional pedal board provides the perfect foundation for your pedals to sit proudly on. crafted from anodised aluminium, its strength and durability are unmatched, meaning you can haul it on long road trips without the worry of it being damaged. and it can handle any ferocious, fearless gig too. so, go wild; you'll have fender quality and reliability at your feet. the cable routing system then promises a clean and tidy setup, made even neater by the cable ties included. the board also comes with a soft case, which features a handy storage pocket to keep your pedals and accessories safe and secure in one place.
Reviews:
very nice, seems good quality, don't know about professional use thoughPhil
Top verarbeitet, intelligente Kabelbeführung und schönes Design. Abzüge gibt es aufgrund der nur aufgesteckten Füße und dass flache Netzteile nur mit zusätzlichem Schaumstoff montiert werden können. Preis/Leistung ist sehr gut
Das Fender-Pedalboard hat mich zu allererst optisch angesprochen, die Metalloptik ist schon sehr chic. Die rückseitige Kabelführung ist gut gemacht, insbesondere wenn man die Länge der Patchkabel und Stromkabel selber konfektioniert hat ohne großen Aufwand ein sehr aufgeräumtes Pedalboard. Vor allem hat man generell mehr Platz und kann die Effekte flexibler positionieren im vgl. zu Boards von Pedaltrain. Die Tasche ist auch gut, gutes Preisleistungsverhältnis. Warum nur 4 Sterne: Die Antirutschfüße sind aufgesteckt und möglicherweise leicht zu verlieren. Das könnte dann rutschig werden oder den Fußboden beschädigen.
5. Gator Gtr-Pwr-8 Pedal Board Power Supply With 8 Isolated Outputs
Product Details:
Comes in original package with all original wires and cables. in mint condition, looks awesome, the only reason i am selling is that it didn't have the right outputs for what i am running. it has a heavy duty metal casing, so it can stand up to some wear and tear.
Specifications:
Number of Isolated Outputs |
8 |
Output Voltage |
9V to 18V |
Indicator Type |
LED |
Frequency Range |
50 Hz – 60 Hz |
Input Voltage |
115V to 230V |
Reviews:
Purchased this power supply for my large Gator Pedal Board and it is a perfect match. I've collected a lot of pedals over the years and it's nice to find something that is versatile enough to power them all.Joel
I attached it to the bottom of my pedal board.Douglas
Great great product. Thanks.jaguitar0116-9
6. Voodoo Lab Dingbat Large Pedalboard With Pedal Power 3 Plus
Product Details:
This item was returned in mint condition. it is free of any performance issues, and has no scratches, blemishes, or other cosmetic flaws.designed for seamless integration with industry-standard voodoo lab pedal power, the innovative patented dingbat pedalboard delivers a rugged, lightweight platform for organizing pedals and keeping cables neatly tucked away and out of view. each dingbat is crafted in the usafrom superior 6061-t6 aircraft-grade aluminumand includes a heavy-duty tour-ready gig bag.
Specifications:
Finish |
Black |
Year |
2020 – 2022 |
Made In |
United States |
Reviews:
Overall: Very happy with this purchase. I don’t use a ton of pedals so the 4+4 power supply shouldnbe plenty. Smells of quality and built to last. Plenty of space for MXR wah, Fender Marine Reverb, Radial ABY, Boss Tuner and Supro Tremolo footswitch. Will add an Overdrive Boost and a Leslie pedal. Good documentation, leads and Velcro. Bag is very hardy. Terrific value package IMHO. Haven’t needed to use support but email warranty followup indicates Voodoo Labs wants to do right by its customers.Matthew
I was looking for a compact board for just a few pedals. I was looking at the Pedaltrain Nano and the MONO Lite because I wanted something that could fit in my MONO Guitar Tick. As much as I like Pedaltrain boards, their bags are junk and nice padded bags can cost as much as the board they carry. While the Dingbat Small is a bit bigger than the PT Nano, it came with what appeared to be (and is) a nice padded soft case at a price equivalent to the MONO Lite Plus without the case. Construction is very similar to the MONO: a bent aluminum sheet with holes for routing cables. One nice feature of the Dingbat is that it is built to accommodate a wide range of Voodoo Lab power supplies. Since I happened to have a VL 4×4 on hand, that was both convenient and cost-saving for me. Since I've made such a big deal of how a padded bag is included, I'll talk a little about it. It's form-fitting but has a good bit of extra space so you can stash extra goodies on top of or beneath the board when it's in the bag. With that extra space, it has velcro straps that help keep the board from shifting while in the case. Padding is quite good. It's no flight case but it'll help protect your board when thrown in the back of a car. The outer covering isn't quite as indestructible as on my MONO cases but I expect it to hold up for some time. Voodoo Lab does sell replacement cases so if I wear this one out, at least I can get another.Alec
Just finished setting up my Dingbat Large pedalboard and overall, I am satisfied with the product. I own a couple of Pedaltrain boards as well, so I was able to compare them to the Dingbat. I am happy with both brands. The boards are well-made, sturdy and provide practical solutions for using multiple pedals. There is one major difference (in my opinion) that distinguishes them. Pedaltrain boards have slots that span the entire length of the board making it very easy to set up your cables. However, this design sometimes makes it a little more challenging securing certain pedals with velcro because there may be less surface area. On the other hand, the Voodoo Lab Dingbat has much smaller slots for setting up your cables. I found this to be a bit more challenging because many of the holes are covered up by your pedals (especially larger pedals), so I had to be more creative in figuring out where my cables should go. However, this was certainly not a "deal killer." It just required a little more thought. Also, the Dingbat has more surface area so my smaller pedals are generally more secure. Both brands offer good soft cases. But I like the fact that the Dingbat case has internal straps that provide more secure packaging for traveling with your rig. I'm happy with both brands and recommend both.Breukelenman
7. Voodoo Lab Dingbat Medium Pedalboard Power Package With Pedal Power 3
Product Details:
Designed for seamless integration with industry-standard voodoo lab pedal power, the innovative patented dingbat pedalboard delivers a rugged, lightweight platform for organizing pedals and keeping cables neatly tucked away and out of view. each dingbatis craftedin the usafrom superior 6061-t6 aircraft-grade aluminumand includes a heavy-duty tour-ready gig bag. size: medium.
Specifications:
Dimensions (W x D) |
559 x 343 mm |
Number Of Effects |
10 |
Incl. power supply |
Yes |
Incl. Gigbag |
Yes |
Incl. Case |
No |
Reviews:
Overall: Very happy with this purchase. I don’t use a ton of pedals so the 4+4 power supply shouldnbe plenty. Smells of quality and built to last. Plenty of space for MXR wah, Fender Marine Reverb, Radial ABY, Boss Tuner and Supro Tremolo footswitch. Will add an Overdrive Boost and a Leslie pedal. Good documentation, leads and Velcro. Bag is very hardy. Terrific value package IMHO. Haven’t needed to use support but email warranty followup indicates Voodoo Labs wants to do right by its customers.Matthew
I was looking for a compact board for just a few pedals. I was looking at the Pedaltrain Nano and the MONO Lite because I wanted something that could fit in my MONO Guitar Tick. As much as I like Pedaltrain boards, their bags are junk and nice padded bags can cost as much as the board they carry. While the Dingbat Small is a bit bigger than the PT Nano, it came with what appeared to be (and is) a nice padded soft case at a price equivalent to the MONO Lite Plus without the case. Construction is very similar to the MONO: a bent aluminum sheet with holes for routing cables. One nice feature of the Dingbat is that it is built to accommodate a wide range of Voodoo Lab power supplies. Since I happened to have a VL 4×4 on hand, that was both convenient and cost-saving for me. Since I've made such a big deal of how a padded bag is included, I'll talk a little about it. It's form-fitting but has a good bit of extra space so you can stash extra goodies on top of or beneath the board when it's in the bag. With that extra space, it has velcro straps that help keep the board from shifting while in the case. Padding is quite good. It's no flight case but it'll help protect your board when thrown in the back of a car. The outer covering isn't quite as indestructible as on my MONO cases but I expect it to hold up for some time. Voodoo Lab does sell replacement cases so if I wear this one out, at least I can get another.Alec
Just finished setting up my Dingbat Large pedalboard and overall, I am satisfied with the product. I own a couple of Pedaltrain boards as well, so I was able to compare them to the Dingbat. I am happy with both brands. The boards are well-made, sturdy and provide practical solutions for using multiple pedals. There is one major difference (in my opinion) that distinguishes them. Pedaltrain boards have slots that span the entire length of the board making it very easy to set up your cables. However, this design sometimes makes it a little more challenging securing certain pedals with velcro because there may be less surface area. On the other hand, the Voodoo Lab Dingbat has much smaller slots for setting up your cables. I found this to be a bit more challenging because many of the holes are covered up by your pedals (especially larger pedals), so I had to be more creative in figuring out where my cables should go. However, this was certainly not a "deal killer." It just required a little more thought. Also, the Dingbat has more surface area so my smaller pedals are generally more secure. Both brands offer good soft cases. But I like the fact that the Dingbat case has internal straps that provide more secure packaging for traveling with your rig. I'm happy with both brands and recommend both.Breukelenman
8. Voodoo Lab Dbsx8 Dingbat Small Pedalboard With Pedal Power X8
Product Details:
The dingbat small power package with a factory-installed pedal power x8 is ideal for assembling a compact and lightweight board with 5 or 6 essential effects. includes all necessary power cables, plus hook-and-loop tape to attach pedals, and zip ties and 4-way tie mounts to secure cabling underneath. power supply: pedal power x8 is a professional compact, ultra-lightweight power supply equipped with eight 500ma isolated 9v dc outputs. x8 delivers zero-noise audiophile-quality power that maximizes the sound and performance of everything from standard battery-operated pedals to modern high current dsp effects. pedal power x8 works at any input voltage making it an ideal choice for international touring. all necessary power cables are included. gig bag: each dingbat small pedalboard includes a heavy-duty tour grade padded gig bag featuring a padded shoulder strap for easy transportation and premium materials, like ykk zipper hardware, to ensure long-lasting protection for your board and pedals. designed for seamless integration with industry-standard voodoo lab pedal power, the innovative patented dingbat pedalboard delivers a rugged, lightweight platform for organizing pedals and keeping cables neatly tucked away and out of view. each dingbat is crafted in the usa from superior 6061-t6 aircraft-grade aluminum and includes a heavy-duty tour-ready gig bag.
Specifications:
Finish |
Black |
Year |
2020 – 2022 |
Made In |
United States |
Reviews:
Overall: Very happy with this purchase. I don’t use a ton of pedals so the 4+4 power supply shouldnbe plenty. Smells of quality and built to last. Plenty of space for MXR wah, Fender Marine Reverb, Radial ABY, Boss Tuner and Supro Tremolo footswitch. Will add an Overdrive Boost and a Leslie pedal. Good documentation, leads and Velcro. Bag is very hardy. Terrific value package IMHO. Haven’t needed to use support but email warranty followup indicates Voodoo Labs wants to do right by its customers.Matthew
I was looking for a compact board for just a few pedals. I was looking at the Pedaltrain Nano and the MONO Lite because I wanted something that could fit in my MONO Guitar Tick. As much as I like Pedaltrain boards, their bags are junk and nice padded bags can cost as much as the board they carry. While the Dingbat Small is a bit bigger than the PT Nano, it came with what appeared to be (and is) a nice padded soft case at a price equivalent to the MONO Lite Plus without the case. Construction is very similar to the MONO: a bent aluminum sheet with holes for routing cables. One nice feature of the Dingbat is that it is built to accommodate a wide range of Voodoo Lab power supplies. Since I happened to have a VL 4×4 on hand, that was both convenient and cost-saving for me. Since I've made such a big deal of how a padded bag is included, I'll talk a little about it. It's form-fitting but has a good bit of extra space so you can stash extra goodies on top of or beneath the board when it's in the bag. With that extra space, it has velcro straps that help keep the board from shifting while in the case. Padding is quite good. It's no flight case but it'll help protect your board when thrown in the back of a car. The outer covering isn't quite as indestructible as on my MONO cases but I expect it to hold up for some time. Voodoo Lab does sell replacement cases so if I wear this one out, at least I can get another.Alec
Just finished setting up my Dingbat Large pedalboard and overall, I am satisfied with the product. I own a couple of Pedaltrain boards as well, so I was able to compare them to the Dingbat. I am happy with both brands. The boards are well-made, sturdy and provide practical solutions for using multiple pedals. There is one major difference (in my opinion) that distinguishes them. Pedaltrain boards have slots that span the entire length of the board making it very easy to set up your cables. However, this design sometimes makes it a little more challenging securing certain pedals with velcro because there may be less surface area. On the other hand, the Voodoo Lab Dingbat has much smaller slots for setting up your cables. I found this to be a bit more challenging because many of the holes are covered up by your pedals (especially larger pedals), so I had to be more creative in figuring out where my cables should go. However, this was certainly not a "deal killer." It just required a little more thought. Also, the Dingbat has more surface area so my smaller pedals are generally more secure. Both brands offer good soft cases. But I like the fact that the Dingbat case has internal straps that provide more secure packaging for traveling with your rig. I'm happy with both brands and recommend both.Breukelenman
9. Voodoo Lab Dingbat Small Ex Pedalboard Power Package With Pedal X8
Product Details:
Dingbat small is ideal for assembling a compact and lightweight board with 4 to 6 essential effects. secured in its included tour-grade soft case, small is compact enough to stow easily in the overhead compartment or beneath the forward seat of any aircraft. installing pedal power with the included mounting hardware is quick and easy using only a screwdriver. hook-and-loop tape is provided to attach pedals, as well as zip ties and 4-way tie mounts to secure cabling underneath. organizea key element in executing a flawless performance is a clean, organized pedalboard, and dingbat’s innovative patented design helps you set up your rig like a pro. all supplies needed for securing pedals and cabling to the board are included. protectdingbat small includes a heavy-duty tour-grade soft case that meets carry-on requirements for all commercial airlines. no bag checking required. premium materials and construction ensure superior performance and long-lasting protection for your pedalboard. a removable shoulder strap is included for easy transportation. powerdingbat power packages offer the convenience and added value of a factory-installed voodoo lab isolated power supply. just add pedals and audio cables and you are ready to go. in addition to convenience, a factory-installed pedal power ensures any pedal will sound and perform its best. even under poor ac line conditions, you can always count on pedal power to consistently deliver the cleanest most reliable power possible. bundle-priced power package options for dingbat small include pedal power x8 or pedal power 2 plus.
Specifications:
Finish |
Black |
Year |
2020 – 2022 |
Made In |
United States |
Reviews:
Overall: Very happy with this purchase. I don’t use a ton of pedals so the 4+4 power supply shouldnbe plenty. Smells of quality and built to last. Plenty of space for MXR wah, Fender Marine Reverb, Radial ABY, Boss Tuner and Supro Tremolo footswitch. Will add an Overdrive Boost and a Leslie pedal. Good documentation, leads and Velcro. Bag is very hardy. Terrific value package IMHO. Haven’t needed to use support but email warranty followup indicates Voodoo Labs wants to do right by its customers.Matthew
I was looking for a compact board for just a few pedals. I was looking at the Pedaltrain Nano and the MONO Lite because I wanted something that could fit in my MONO Guitar Tick. As much as I like Pedaltrain boards, their bags are junk and nice padded bags can cost as much as the board they carry. While the Dingbat Small is a bit bigger than the PT Nano, it came with what appeared to be (and is) a nice padded soft case at a price equivalent to the MONO Lite Plus without the case. Construction is very similar to the MONO: a bent aluminum sheet with holes for routing cables. One nice feature of the Dingbat is that it is built to accommodate a wide range of Voodoo Lab power supplies. Since I happened to have a VL 4×4 on hand, that was both convenient and cost-saving for me. Since I've made such a big deal of how a padded bag is included, I'll talk a little about it. It's form-fitting but has a good bit of extra space so you can stash extra goodies on top of or beneath the board when it's in the bag. With that extra space, it has velcro straps that help keep the board from shifting while in the case. Padding is quite good. It's no flight case but it'll help protect your board when thrown in the back of a car. The outer covering isn't quite as indestructible as on my MONO cases but I expect it to hold up for some time. Voodoo Lab does sell replacement cases so if I wear this one out, at least I can get another.Alec
Just finished setting up my Dingbat Large pedalboard and overall, I am satisfied with the product. I own a couple of Pedaltrain boards as well, so I was able to compare them to the Dingbat. I am happy with both brands. The boards are well-made, sturdy and provide practical solutions for using multiple pedals. There is one major difference (in my opinion) that distinguishes them. Pedaltrain boards have slots that span the entire length of the board making it very easy to set up your cables. However, this design sometimes makes it a little more challenging securing certain pedals with velcro because there may be less surface area. On the other hand, the Voodoo Lab Dingbat has much smaller slots for setting up your cables. I found this to be a bit more challenging because many of the holes are covered up by your pedals (especially larger pedals), so I had to be more creative in figuring out where my cables should go. However, this was certainly not a "deal killer." It just required a little more thought. Also, the Dingbat has more surface area so my smaller pedals are generally more secure. Both brands offer good soft cases. But I like the fact that the Dingbat case has internal straps that provide more secure packaging for traveling with your rig. I'm happy with both brands and recommend both.Breukelenman
10. Mooer Micro Power Supply
Product Details:
This was my backup board, and didn't get much use. excellent condition compact folding pedalboard. comes wired with pedalpower 10 output power supply for up to 10 small pedals. i was using it with a bunch of t.c. mini pedals and it was awesome. folding design lets you spread it out as a single row or as two compact rows without the need to disconnect. i added small wooden feet to accommodate the powersupply underneath, but it still fits beautifully in the handy carrying case. small size, lightweight, and easy to carry. it includes all the power wiring, and some patch cables so you can be up and running in minutes.the board has the loop side of velcro installed as well.everything works perfectly, and power supply is plenty powerful for all the small to medium sized pedals. plugs in with a wall plug as shown.
Specifications:
Finish |
Black |
Year |
2010s |
Made In |
China |
Reviews:
I bought the first for a mini pedal board to use with my fly rig. The power is very quiet. The size is great to conserve pedal board real estate. The second is for another pedal board for playing solo using a looper, harmonizer, octave pedal etc. Again no issues and the power is very quiet and clean.wwd83
I use this power supply for my small pedalboard that holds only 4-5 pedals. It works great and I'd definitely recommend it to anyone looking to power small to medium pedal boards.B-money
I perform around 50 gigs a year with a classic rock/metal band. My pedal board is limited on space and needed 9 volt power for my 8 pedals. It is nice and small, it came with all of the cables needed to route from the power pedal to each pedals (and even a reverse polarity cable if needed). I used the One Spot cable before this and noticed some clicking noise every now and then and I wanted something different. My only con I found was the 8 blue lights which turn on when the port is being used is very bright. I may put some tape over it if it keeps bothering me.Hagenater
11. Voodoo Lab Dingbat Medium Pedalboard With Pedal Power 3 Plus
Product Details:
Designed for seamless integration with industry-standard voodoo lab pedal power, the innovative patented dingbat pedalboard delivers a rugged, lightweight platform for organizing pedals and keeping cables neatly tucked away and out of view. each dingbat is crafted in the usafrom superior 6061-t6 aircraft-grade aluminumand includes a heavy-duty tour-ready gig bag. size: medium.
Specifications:
Pedalboard weight with power supply |
5.5lbs. (2.5kg) |
Pedalboard surface size |
22” x 13.25” (559mm x 337mm) |
Finish |
Black |
Year |
2020 – 2022 |
Made In |
United States |
Reviews:
Overall: Very happy with this purchase. I don’t use a ton of pedals so the 4+4 power supply shouldnbe plenty. Smells of quality and built to last. Plenty of space for MXR wah, Fender Marine Reverb, Radial ABY, Boss Tuner and Supro Tremolo footswitch. Will add an Overdrive Boost and a Leslie pedal. Good documentation, leads and Velcro. Bag is very hardy. Terrific value package IMHO. Haven’t needed to use support but email warranty followup indicates Voodoo Labs wants to do right by its customers.Matthew
I was looking for a compact board for just a few pedals. I was looking at the Pedaltrain Nano and the MONO Lite because I wanted something that could fit in my MONO Guitar Tick. As much as I like Pedaltrain boards, their bags are junk and nice padded bags can cost as much as the board they carry. While the Dingbat Small is a bit bigger than the PT Nano, it came with what appeared to be (and is) a nice padded soft case at a price equivalent to the MONO Lite Plus without the case. Construction is very similar to the MONO: a bent aluminum sheet with holes for routing cables. One nice feature of the Dingbat is that it is built to accommodate a wide range of Voodoo Lab power supplies. Since I happened to have a VL 4×4 on hand, that was both convenient and cost-saving for me. Since I've made such a big deal of how a padded bag is included, I'll talk a little about it. It's form-fitting but has a good bit of extra space so you can stash extra goodies on top of or beneath the board when it's in the bag. With that extra space, it has velcro straps that help keep the board from shifting while in the case. Padding is quite good. It's no flight case but it'll help protect your board when thrown in the back of a car. The outer covering isn't quite as indestructible as on my MONO cases but I expect it to hold up for some time. Voodoo Lab does sell replacement cases so if I wear this one out, at least I can get another.Alec
Just finished setting up my Dingbat Large pedalboard and overall, I am satisfied with the product. I own a couple of Pedaltrain boards as well, so I was able to compare them to the Dingbat. I am happy with both brands. The boards are well-made, sturdy and provide practical solutions for using multiple pedals. There is one major difference (in my opinion) that distinguishes them. Pedaltrain boards have slots that span the entire length of the board making it very easy to set up your cables. However, this design sometimes makes it a little more challenging securing certain pedals with velcro because there may be less surface area. On the other hand, the Voodoo Lab Dingbat has much smaller slots for setting up your cables. I found this to be a bit more challenging because many of the holes are covered up by your pedals (especially larger pedals), so I had to be more creative in figuring out where my cables should go. However, this was certainly not a "deal killer." It just required a little more thought. Also, the Dingbat has more surface area so my smaller pedals are generally more secure. Both brands offer good soft cases. But I like the fact that the Dingbat case has internal straps that provide more secure packaging for traveling with your rig. I'm happy with both brands and recommend both.Breukelenman
12. Gator G-Bus-8-Us Pedal Board Power Supply
Product Details:
The gator cases g-bus-8-us guitar effects pedal power supply is a great addition to an existing pedal board set-up. eight 9v outputs and three 18v outputs provide power for multiple pedals. the g-bus also features short circuit protection with reset and can power up to 11 standard box pedals. the g-bus also includes a power supply and eight 9v 24 straight end cables and one 18 volt 24 straight end cable. the g-bus is constructed of heavy-duty aluminum and has four mounting holes for mounting to the gator pedal totes, gig-box, g-tour pedal boards, or any other popular model of guitar effects pedal board. the g-bus-8-us dimensions are 6 x 4 x 3. short circuit protection with reset. power cable, eight 9v and one 18v cables included. gator cases is known for manufacturing innovative products designed to protect! it isnt hard to find a great reason why gator should be the brand you trust to protect your equipment for life!
Specifications:
Power Supply |
1500 mA |
Number of 9V Outlets |
8 |
Number of 18V Outlets |
3 |
Material |
Aluminum |
Number of Mounting Holes |
4 |
Reviews:
There have been two occasions where the power adapter has just fallen out of the brick during live shows. It's meant either frantically flipping over my board to plug it back in, or even restarting the song. The length of the cord is way too short, and the connection is way too loose. The transformer is also power-strip unfriendly, and I much prefer the design of the One Spot. It also really bothers me that the individual plugs that the brick uses aren't right angled when they connect to the pedals, which means that the plug housing sticks out of the pedal board on your top row of pedals. Everything uses proprietary connectors too, except for where they connect to the pedal, so it's impossible to improve the design through tinkering. The unit also mounts very clumsily to my pedaltrain board. I had to ziptie it to the bottom side of my tuner pedal at this haphazard angle. The one-spot is 1/5th the price and doesn't suffer from any of these problems, I'm going back.Donald
I have 3 of these on 3 separate boards. I would and will get more if I ever need to in the future. These are compact, come with plenty of cable length and power cord length. mount them right side up or upside down, in a clamp or set on top of your board. Worth every penny!Azuljay
There's two problems with this G-BUS-8. First, the outputs are not as isolated as you'd think. The eight 9V outputs are wired directly to each other in parallel. This does not constitute isolation. The only isolation you get, is the 9V outputs from the 18V outputs. Second, the 120VAC to 18VDC wallwart adapter uses a proprietary plug to connect to the G-BUS-8 and that plug and wire is very very fragile. It is not durable enough for gigging. It WILL wear out for you, and then you'll discover the fun part; you cannot replace it. Gator does not offer the AC adapter as a repair or replacement item. They expect you to buy the whole unit again. This is an unacceptable business practice. Don't buy this. Get the Voodoo Lab Pedal Power ISO-5. It actually does what it claims, and is built to handle an active career in your pedalboard.Bryan316
13. Caline Cp-04 Guitar Pedal Power Supply Station Distributor 10 Isolated Output Fo
Product Details:
Power supplies by gzmay. details:guitar pedal power supply feature: this effect power supply is a safe and secure pedal board power supply 10 isolated outputs, isolated short circuit overcurrent protected.each output features a blue led. when lit, this led indicates a good connection. if short-circuited or overloaded,this led will turn off. noise free support, anti-interface , isolated output channels, great heat dissipation guitar pedal power supply adaptor is an 10 outputs isolated pedal power supply available for pedals,keyboards,amps and other instruments with the same voltage and current demand from outputs aluminum alloy shell, lightweight and durable. let yourself enjoy music anytime, anywhere guitar bass effects pedals with built-in usb charging port for phone iphone pad ipad power supply specifications: material: aluminum alloy power: ac 110v-240v power for: 9v, 12v or 18v guitar effect pedal input: dc 18v output: 4 way 9v 100ma 3 way 9v 300ma 1 way 9v 500ma 1 way 12v…
Specifications:
Package Dimensions |
7.05 x 4.96 x 2.32 inches |
Country of Origin |
China |
Is Discontinued By Manufacturer |
No |
Compatible Devices |
Musical Instruments |
Connector Type |
USB |
Compatible Phone Models |
Iphone |
Power Source |
有线电气 |
Wattage |
18 watts |
Input Voltage |
240 Volts |
Total USB Ports |
1 |
Main Power Connector Type |
2 pin |
Connector Gender |
Male-to-Male |
14. Voodoo Lab Dingbat Medium Pedalboard Power Package With Pedal Power 2 Plus
Product Details:
Crafted entirely in sonoma county, california from superior american 6061-t6 aircraft-grade aluminum, voodoo lab dingbat pedalboards offer a rugged, lightweight platform for organizing your pedals and keeping cables neatly tucked away and out of view. powered up dingbat power packages take your pedalboard selection experience to the next level by allowing you to choose a pedalboard that includes a pre-installed industry standard voodoo lab pedal power compliment for one package price. no installation necessary. a dingbat power package is ready to go right out of the box. dingbat pedalboard power packages are available in an assortment of sizes and power configurations to meet a variety of performance situations and include all the necessary power cables and materials required to secure your pedals and cabling to the pedalboard. the dingbat medium pedalboard power package w/ pedal power 2 plus has plenty of room to arrange and supply individual isolated power to eight (8) standard 9v effects. among the eight isolated outputs are two (2) 250ma outputs designed to power effects such as the line 6 dl4 delay modeler pedal and boss twin pedals. 18v and 24v effects like those from mxr and electro-harmonix can be powered using the included voltage doubler cables. need an additional power supply no problem. dingbat has plenty of space underneath to mount an additional pedal power.
Specifications:
Material |
Aluminum |
Closure Type |
Zipper |
UV Protection |
Yes |
Pedal Mount Type |
Hook-and-loop |
Output Voltage |
250 mA |
Reviews:
Overall: Very happy with this purchase. I don’t use a ton of pedals so the 4+4 power supply shouldnbe plenty. Smells of quality and built to last. Plenty of space for MXR wah, Fender Marine Reverb, Radial ABY, Boss Tuner and Supro Tremolo footswitch. Will add an Overdrive Boost and a Leslie pedal. Good documentation, leads and Velcro. Bag is very hardy. Terrific value package IMHO. Haven’t needed to use support but email warranty followup indicates Voodoo Labs wants to do right by its customers.Matthew
I was looking for a compact board for just a few pedals. I was looking at the Pedaltrain Nano and the MONO Lite because I wanted something that could fit in my MONO Guitar Tick. As much as I like Pedaltrain boards, their bags are junk and nice padded bags can cost as much as the board they carry. While the Dingbat Small is a bit bigger than the PT Nano, it came with what appeared to be (and is) a nice padded soft case at a price equivalent to the MONO Lite Plus without the case. Construction is very similar to the MONO: a bent aluminum sheet with holes for routing cables. One nice feature of the Dingbat is that it is built to accommodate a wide range of Voodoo Lab power supplies. Since I happened to have a VL 4×4 on hand, that was both convenient and cost-saving for me. Since I've made such a big deal of how a padded bag is included, I'll talk a little about it. It's form-fitting but has a good bit of extra space so you can stash extra goodies on top of or beneath the board when it's in the bag. With that extra space, it has velcro straps that help keep the board from shifting while in the case. Padding is quite good. It's no flight case but it'll help protect your board when thrown in the back of a car. The outer covering isn't quite as indestructible as on my MONO cases but I expect it to hold up for some time. Voodoo Lab does sell replacement cases so if I wear this one out, at least I can get another.Alec
Just finished setting up my Dingbat Large pedalboard and overall, I am satisfied with the product. I own a couple of Pedaltrain boards as well, so I was able to compare them to the Dingbat. I am happy with both brands. The boards are well-made, sturdy and provide practical solutions for using multiple pedals. There is one major difference (in my opinion) that distinguishes them. Pedaltrain boards have slots that span the entire length of the board making it very easy to set up your cables. However, this design sometimes makes it a little more challenging securing certain pedals with velcro because there may be less surface area. On the other hand, the Voodoo Lab Dingbat has much smaller slots for setting up your cables. I found this to be a bit more challenging because many of the holes are covered up by your pedals (especially larger pedals), so I had to be more creative in figuring out where my cables should go. However, this was certainly not a "deal killer." It just required a little more thought. Also, the Dingbat has more surface area so my smaller pedals are generally more secure. Both brands offer good soft cases. But I like the fact that the Dingbat case has internal straps that provide more secure packaging for traveling with your rig. I'm happy with both brands and recommend both.Breukelenman
15. Voodoo Lab Dingbat Small Ex Pedalboard With Pedal Power 3
Product Details:
The voodoo lab dingbat small ex with pedal power 3 is an ideal powered pedalboard for six to eight effects. the factory-installed pedal power 3 features eight 500ma zero-noise isolated dc outputs that will bring out the best tone from pedals. each dingbat is crafted in the us from superior 6061-t6 aircraft-grade aluminum and includes power cables, pedal mounting accessories and a heavy-duty tour-grade padded gig bag. designed for seamless integration with industry-standard voodoo lab pedal power, the innovative dingbat pedalboard delivers a rugged, lightweight platform for organizing pedals and keeping cables neatly tucked away and out of view. its 10" depth easily accommodates a full size wah or volume pedal, while still maintaining an airline carry-on size.
Specifications:
Number Of Effects |
8 |
Incl. power supply |
Yes |
Incl. Gigbag |
Yes |
Incl. Case |
No |
Reviews:
Overall: Very happy with this purchase. I don’t use a ton of pedals so the 4+4 power supply shouldnbe plenty. Smells of quality and built to last. Plenty of space for MXR wah, Fender Marine Reverb, Radial ABY, Boss Tuner and Supro Tremolo footswitch. Will add an Overdrive Boost and a Leslie pedal. Good documentation, leads and Velcro. Bag is very hardy. Terrific value package IMHO. Haven’t needed to use support but email warranty followup indicates Voodoo Labs wants to do right by its customers.Matthew
I was looking for a compact board for just a few pedals. I was looking at the Pedaltrain Nano and the MONO Lite because I wanted something that could fit in my MONO Guitar Tick. As much as I like Pedaltrain boards, their bags are junk and nice padded bags can cost as much as the board they carry. While the Dingbat Small is a bit bigger than the PT Nano, it came with what appeared to be (and is) a nice padded soft case at a price equivalent to the MONO Lite Plus without the case. Construction is very similar to the MONO: a bent aluminum sheet with holes for routing cables. One nice feature of the Dingbat is that it is built to accommodate a wide range of Voodoo Lab power supplies. Since I happened to have a VL 4×4 on hand, that was both convenient and cost-saving for me. Since I've made such a big deal of how a padded bag is included, I'll talk a little about it. It's form-fitting but has a good bit of extra space so you can stash extra goodies on top of or beneath the board when it's in the bag. With that extra space, it has velcro straps that help keep the board from shifting while in the case. Padding is quite good. It's no flight case but it'll help protect your board when thrown in the back of a car. The outer covering isn't quite as indestructible as on my MONO cases but I expect it to hold up for some time. Voodoo Lab does sell replacement cases so if I wear this one out, at least I can get another.Alec
Just finished setting up my Dingbat Large pedalboard and overall, I am satisfied with the product. I own a couple of Pedaltrain boards as well, so I was able to compare them to the Dingbat. I am happy with both brands. The boards are well-made, sturdy and provide practical solutions for using multiple pedals. There is one major difference (in my opinion) that distinguishes them. Pedaltrain boards have slots that span the entire length of the board making it very easy to set up your cables. However, this design sometimes makes it a little more challenging securing certain pedals with velcro because there may be less surface area. On the other hand, the Voodoo Lab Dingbat has much smaller slots for setting up your cables. I found this to be a bit more challenging because many of the holes are covered up by your pedals (especially larger pedals), so I had to be more creative in figuring out where my cables should go. However, this was certainly not a "deal killer." It just required a little more thought. Also, the Dingbat has more surface area so my smaller pedals are generally more secure. Both brands offer good soft cases. But I like the fact that the Dingbat case has internal straps that provide more secure packaging for traveling with your rig. I'm happy with both brands and recommend both.Breukelenman
16. Hiree Guitar Pedal Power Supply 7 Dc Output For 9v Effect Pedal Board With 2 Ac Outlets For Charging Speaker, Musical Instruments
Product Details:
7 way isolated outputhiree power supply is designed for effect pedal. 7 individual output: 9 volt 100m – a port x 6, 9v 300m – a port x 1. short circuit in one channel won't affect other channels function. – short-circuit / over-current protection:all 7 outputs in this unit have separate short-circuit protection, i.e. short circuit in one channel won't affect other channels' function. – noise filteringthis guitar pedal power brick is built in a powerful noise filter. it is so quiet that you can enjoy playing with clear and firm sound. – compact size and no external adapter – compact body and 5ft disconnectable ac power cord, very easy to manage and carry everywhere you go. for maximum space-saving at home or in your travel bag. – wide range input voltage from 100v to 240v is ideal for international travel.
Specifications:
Package Dimensions |
5.98 x 3.11 x 2.72 inches |
Color Name |
9v |
Compatible Devices |
PC, Speakers |
Power Source |
Corded Electric |
Reviews:
solid, reliable power supply. lightweight, no noise, connections feel tight. what more could you need?nomorebarking
Perfect for my needs i might buy 2 more in the future. Thank youcl-pipig-lmyvumfcmd
17. Voodoo Lab Dingbat Large Pedalboard
Product Details:
Voodoo lab dingbat pedalboards have a holed structure that allows you to place pedals to the board freely and keep cables hidden from view. seamless integration with voodoo lab pedal power series power supplies no drilling needed. brackets for pedal powers included. this is the largest dingbat model, measurements are 65.4 cm (width) x 40 cm (depth). the carry bag of dingbat-pedalboards is of high quality with durable ykk zippers made to withstand gigging and transportation. the medium and large boards have shoulder straps so they can be carried like a backpack. the small- and tiny-boards on the other hand are very compact and easy to carry. all of the models have a comfortable padded carry handle. dimensions (w x d) 65.4 cm x 40 cm professional tour grade padded gig bag with premium ykk zipper hardware crafted from lightweight american 6061-t6 aircraft-grade aluminum pedal power mounting brackets included. velcro included.
Specifications:
Material |
Aluminum |
Fastener Type |
Hook-and-loop |
Mountable |
Yes |
Reviews:
Overall: Very happy with this purchase. I don’t use a ton of pedals so the 4+4 power supply shouldnbe plenty. Smells of quality and built to last. Plenty of space for MXR wah, Fender Marine Reverb, Radial ABY, Boss Tuner and Supro Tremolo footswitch. Will add an Overdrive Boost and a Leslie pedal. Good documentation, leads and Velcro. Bag is very hardy. Terrific value package IMHO. Haven’t needed to use support but email warranty followup indicates Voodoo Labs wants to do right by its customers.Matthew
I was looking for a compact board for just a few pedals. I was looking at the Pedaltrain Nano and the MONO Lite because I wanted something that could fit in my MONO Guitar Tick. As much as I like Pedaltrain boards, their bags are junk and nice padded bags can cost as much as the board they carry. While the Dingbat Small is a bit bigger than the PT Nano, it came with what appeared to be (and is) a nice padded soft case at a price equivalent to the MONO Lite Plus without the case. Construction is very similar to the MONO: a bent aluminum sheet with holes for routing cables. One nice feature of the Dingbat is that it is built to accommodate a wide range of Voodoo Lab power supplies. Since I happened to have a VL 4×4 on hand, that was both convenient and cost-saving for me. Since I've made such a big deal of how a padded bag is included, I'll talk a little about it. It's form-fitting but has a good bit of extra space so you can stash extra goodies on top of or beneath the board when it's in the bag. With that extra space, it has velcro straps that help keep the board from shifting while in the case. Padding is quite good. It's no flight case but it'll help protect your board when thrown in the back of a car. The outer covering isn't quite as indestructible as on my MONO cases but I expect it to hold up for some time. Voodoo Lab does sell replacement cases so if I wear this one out, at least I can get another.Alec
Just finished setting up my Dingbat Large pedalboard and overall, I am satisfied with the product. I own a couple of Pedaltrain boards as well, so I was able to compare them to the Dingbat. I am happy with both brands. The boards are well-made, sturdy and provide practical solutions for using multiple pedals. There is one major difference (in my opinion) that distinguishes them. Pedaltrain boards have slots that span the entire length of the board making it very easy to set up your cables. However, this design sometimes makes it a little more challenging securing certain pedals with velcro because there may be less surface area. On the other hand, the Voodoo Lab Dingbat has much smaller slots for setting up your cables. I found this to be a bit more challenging because many of the holes are covered up by your pedals (especially larger pedals), so I had to be more creative in figuring out where my cables should go. However, this was certainly not a "deal killer." It just required a little more thought. Also, the Dingbat has more surface area so my smaller pedals are generally more secure. Both brands offer good soft cases. But I like the fact that the Dingbat case has internal straps that provide more secure packaging for traveling with your rig. I'm happy with both brands and recommend both.Breukelenman
18. Voodoo Lab Dingbat Tiny Pedalboard With Pedal Power X4
Product Details:
The voodoo lab dingbat tiny is the ultimate small "grab 'n' go" board, for players who don't use lots of pedals, and where space onstage is at a premium. board is in great condition except for some paint scraped off the bottom (see photos). pedal power x4 works perfectly; ac cord and connecting cables work and are included. the gig bag is in great shape as well. also included are ernie ball flat patch cables and extra hook-and-loop tape. great value, just add pedals!
Specifications:
Strap Type |
Removable |
Material |
Aluminum |
Closure |
Zipper, hook-and-loop |
UV-Resistant |
Yes |
Recommended Age Group |
Adult |
Reviews:
Overall: Very happy with this purchase. I don’t use a ton of pedals so the 4+4 power supply shouldnbe plenty. Smells of quality and built to last. Plenty of space for MXR wah, Fender Marine Reverb, Radial ABY, Boss Tuner and Supro Tremolo footswitch. Will add an Overdrive Boost and a Leslie pedal. Good documentation, leads and Velcro. Bag is very hardy. Terrific value package IMHO. Haven’t needed to use support but email warranty followup indicates Voodoo Labs wants to do right by its customers.Matthew
I was looking for a compact board for just a few pedals. I was looking at the Pedaltrain Nano and the MONO Lite because I wanted something that could fit in my MONO Guitar Tick. As much as I like Pedaltrain boards, their bags are junk and nice padded bags can cost as much as the board they carry. While the Dingbat Small is a bit bigger than the PT Nano, it came with what appeared to be (and is) a nice padded soft case at a price equivalent to the MONO Lite Plus without the case. Construction is very similar to the MONO: a bent aluminum sheet with holes for routing cables. One nice feature of the Dingbat is that it is built to accommodate a wide range of Voodoo Lab power supplies. Since I happened to have a VL 4×4 on hand, that was both convenient and cost-saving for me. Since I've made such a big deal of how a padded bag is included, I'll talk a little about it. It's form-fitting but has a good bit of extra space so you can stash extra goodies on top of or beneath the board when it's in the bag. With that extra space, it has velcro straps that help keep the board from shifting while in the case. Padding is quite good. It's no flight case but it'll help protect your board when thrown in the back of a car. The outer covering isn't quite as indestructible as on my MONO cases but I expect it to hold up for some time. Voodoo Lab does sell replacement cases so if I wear this one out, at least I can get another.Alec
Just finished setting up my Dingbat Large pedalboard and overall, I am satisfied with the product. I own a couple of Pedaltrain boards as well, so I was able to compare them to the Dingbat. I am happy with both brands. The boards are well-made, sturdy and provide practical solutions for using multiple pedals. There is one major difference (in my opinion) that distinguishes them. Pedaltrain boards have slots that span the entire length of the board making it very easy to set up your cables. However, this design sometimes makes it a little more challenging securing certain pedals with velcro because there may be less surface area. On the other hand, the Voodoo Lab Dingbat has much smaller slots for setting up your cables. I found this to be a bit more challenging because many of the holes are covered up by your pedals (especially larger pedals), so I had to be more creative in figuring out where my cables should go. However, this was certainly not a "deal killer." It just required a little more thought. Also, the Dingbat has more surface area so my smaller pedals are generally more secure. Both brands offer good soft cases. But I like the fact that the Dingbat case has internal straps that provide more secure packaging for traveling with your rig. I'm happy with both brands and recommend both.Breukelenman
19. Rockboard Power Lt Xl Rechargeable Pedalboard Power Supply Silver
Product Details:
The rockboard rbo power lt xl is a rechargeable power station for effects pedals, independent from the wall outlet. no more worrying about your 9v batteries dying mid song. you can also forget about searching for a wall outlet on stage to power your pedal board. the rockboard rbo power lt xl is equipped with powerful and long-lasting, rechargeable lithium-ion batteries, to supply effects pedals up to approx. 50 hours or more with hum free 9v dc current. recharge time for the unit is approximately 7 hours.
Specifications:
Product Dimensions |
4.52 x 2.28 x 0.86 inches |
Batteries |
1 Lithium Ion batteries required. (included) |
Is Discontinued By Manufacturer |
No |
Color Name |
Silver |
Compatible Devices |
Cellular Phones |
Connector Type |
9v |
Musical Style |
Any |
Battery type |
Lithium Ion |
Reviews:
the power bank is very useful, you don't have to have it all messed with cables. it also eliminates the parasite noises from electrical network that normal wired power banks have. the only con is that it doesn't retain the charge for long periods, you have to recharge it in regular basis.boatman_70
This is such a great option for a rehearsal pedalboard. Maybe even small gigs. No trailing wires or extensions required.bassface68
20. Rockboard Power Block, Multi-Power Supply
Product Details:
The rockboard power block is a compact power supply, delivering current for 10 effect pedals. the power block has 8 x 9 v (150 ma each) output and 2 x 18 v (400 ma each) outputs. this power supply provides 2000 ma and comes with 10 connect cables and a mains adapter.
Reviews:
This does the job and keeps my pedal board working with ease. Definite inexpensive option to consider buying!B
I bought this to power my old pedal board I had for years. Before I was still using batteries when I used it. Well made very quiet could not ask for more.
10 outlet supply, awesome for the money highly recommend in buying