Guitar Neck Width Comparison For Sale (2024 Update)

Genuine fender stratocaster guitar maple neck features a comfortable "modern c" profile and 9.5"-radius rosewood or maple fingerboard with 21 medium jumbo frets. also includes standard truss rod and pre-slotted synthetic bone nut. tinted satin urethane fi – fingerboard: maple – number of frets: 21fret size: medium jumbo – neck shape: modern "c"neck material: maple – neck finish: satin urethane on back of neck, gloss on face of headstock – fingerboard radius: 9.5" (241mm)scale length: 25.5" (648mm)nut material: synthetic bone (melamine)nut width: 1.650" (42mm)position inlays: white dot3/16" truss rod adjustment nut (at headstock)6 pre-drilled tuning machine holes with 2-guide pin holes for each tuning machine – each neck is serialized and stamped during quality inspection – walnut "skunk" stripe on back of neck – fender logo with "original contour body" decal

Genuine fender stratocaster guitar maple neck features a comfortable "modern c" profile and 9.5"-radius rosewood or maple fingerboard with 21 medium jumbo frets. also includes standard truss rod and pre-slotted synthetic bone nut. tinted satin urethane fi – fingerboard: maple – number of frets: 21fret size: medium jumbo – neck shape: modern "c"neck material: maple – neck finish: satin urethane on back of neck, gloss on face of headstock – fingerboard radius: 9.5" (241mm)scale length: 25.5" (648mm)nut material: synthetic bone (melamine)nut width: 1.650" (42mm)position inlays: white dot3/16" truss rod adjustment nut (at headstock)6 pre-drilled tuning machine holes with 2-guide pin holes for each tuning machine – each neck is serialized and stamped during quality inspection – walnut "skunk" stripe on back of neck – fender logo with "original contour body" decal

Details: fret: cupronickel nut: abs dimension information tuner hole: 10mm width at nut: 42mm with at heel: 57.5mm( 0.5 mm deviation) thickness at heel: 27mm truss rod: two-way adjustable, 4mm allen wrench adjustable truss rod has been installed at the headstock. neck wood: maple frets: 22 frets

6 string st electric guitar neck wenge guitar neck 22 frets bone nut st guitar neck with small size

All of our our necks have been dressed. this includes fret leveling, crowning, and polishing : ) new maple / rosewood stratocaster guitar neck these necks are ready to install. adjust the truss and they are good to go : ) bone nut (installed) m.i.j. even c neck contour .22 mm at 1st fret = .87 inch .23 mm at 12 fret = .93 inch neck material: one piece maple/rosewood fretboard finish: vintage tint / nitro satin 1 5/8s nut width radius: 9.5" , medium c back contour fret: 21 jumbo frets 9 mm machine heads holes (standard size, can be reamed larger) heel truss-rod adjust (double expanding, action truss rod) will it fit? standard fender heel specs warmoth, allparts, fender, musikraft, jamerson, g&l, custom shop, usa, mighty mite, wd quartersawn roasted stratocaster guitar neck / strat-22 w/warmoth bone nut

2 guitars neck only.

Description suitable for diy electric guitars amateur diy electric guitar or neck replacement * new electric guitar neck mahogany+rosewood fretboard. 22 fret 24.75 inch. 42mm nut width. double action truss rod. side dot on the left side. 10mm tuner holes, with 12inch radius and c profile . payment we appreciate quick payment and look forward to helping you with your musical instrument needs in the future. payment method: accept the following forms of payment via our secure system: paypal (visa, master, american express, discover, debit, and bank transfer) credit / west union credit / west union: please contact us if you like the in this way to pay. we recommend you by the paypal. checkout: after winning an item in an auction or a "buy it now" purchase, click on the checkout now button to immediately proceed with the checkout and payment process. you will be directed to our third party checkout system. delivery details return for refund: if you are not completely satisfied with y

Tl electric guitar neck 6 string guitar neck zebra wood matte 5.6cm width guitar neck 21 fret for

All of our our necks have been dressed. this includes fret leveling, crowning, and polishing : ) new maple / rosewood stratocaster guitar neck these necks are ready to install. adjust the truss and they are good to go : ) bone nut (installed) m.i.j. even c neck contour .22 mm at 1st fret = .87 inch .23 mm at 12 fret = .93 inch neck material: one piece maple/rosewood fretboard finish: aged tint / nitro satin 1 5/8s nut width radius: 9.5" , medium c back contour fret: 21 jumbo frets 9 mm machine heads holes (standard size, can be reamed larger) heel truss-rod adjust (double expanding, action truss rod) will it fit? standard fender heel specs warmoth, allparts, fender, musikraft, jamerson, g&l, custom shop, usa, mighty mite, wd quartersawn roasted stratocaster guitar neck / strat-22 w/warmoth bone nut

Stewmac tonewoods – acoustic guitar necks, 14-fret dreadnought, dovetail one-piece quartersawn mahogany necks for martin-style guitars.

22 fret electric guitar neck big head black wenge wood matte finish guitar neck for 6 strings st

This solo guitar neck is intended as a replacement or diy project. neck specifications may have a +/- 1 or 2mm variance. if using this neck with a non solo body / solo hardware, slight modifications may be necessary in order to achieve a proper fit. this guitar neck is designed to fit our tc style guitar kits. specifications maple neck maple fretboard 12′′ radius 22 frets comes pre-sealed with a poly-resin sealer. 2-way truss rod black dot inlays & side markers 25 1/2′′ scale length nut width: 1 5/8′′ thickness at nut: 13/16′′ thickness at 12th fret: 15/16′′ width at 12th fret: 2 1/16′′ item shown: solo tc style 22 fret guitar neck with maple fretboard model #: sl-tcnm22h-u upc: 0787392886718

1. this guitar neck is compatible for fender st-style electric guitar neck replacement. 2. high-quality maple neck, delicate and unique. 3. fingerboard with 22 frets, smooth and high density. 4. adjustable truss rod has been installed at the headstock. 5. the hole for the tuning machine is 10mm in diameter. p descriptions: br / frets: 22 frets br / neck: canadian maple neck br / fingerboard: rosewood br / nut: 42mm nut br / back midline: rosewood br / color: matte yellow br / peg holes diameter: 10 mm / 0.4 inch br / neck length: 665mm / 26.18 in br / heel width: 56mm/2.2in br / heel depth: 20mm-26mm(with fingerboard) br / neck weight: 590g/20.8oz – package included: br / 1*guitar neck /p

High-quality guitar neck for 6-string travel guitar. with matte surface and well-constructed structure, it has excellent performance and can bring you comfortable playing experience. features: 25-fret guitar neck replacement for 6-string travel guitar, with matte surface. maple headstock and handle, rose wood fretboard, reliable quality. beveled fret ends and rolled edges give you smooth touching feeling. well-constructed nut and horizontal fret level bring you comfortable playing experience and the strings from buzzing. heel with 57mm heel width is suitable for diverse kinds of guitar neck pocket. adjustable truss rod has been installed at the headstock, which helps stabilize the performance of your guitar neck. note: size and color may be slightly different due to manual measurement and different conditions. specifications:

Description: this guitar neck is designed for elecic guitar neck replacement. the guitar neck is , manship, durable and unique. adjustable rod installed the head stock. a gre replacement for your old guitar for diy your own guitar. guitar fingerboard with 24 frets, smooth and high density th you higher-range songs. with inlay side, it is convenient to distinguish the corresponding fret. the fret ends and rolled of the guitar neck give you a smooth specificion: frets: 24 frets body merial: canada maple fretboard merial: rosewood fret width: 7mm nut: 42mm neck weight: 536g/18. size chart: 530x57mm/20.87x24inch includes: 1 guitar neck(sings or other parts not included) note: pl allow slightly error due to manual measurement. due to the difference between monitors, the picture may not reflect the actual color of the item. wish you a wonderful on shopping!

The original bolt on aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. it is designed to be an aftermarket fit with most stratocasters, telecasters, and jazzmasters. it comes with everything you need to replace your current neck with one from rgi. necks are built to order with your specifications, so expect up to a two month wait before receiving your neck. neck specs: material: 6061 solid billet aluminum scale: 25.5” nut width: 1 11/16” weight: solid billet: 3 lbs 3 oz, hollow richlite: 2 lbs 2 oz frets: 22 stainless steel medium/medium fretboard radius: 12” tuners: 3+3 sperzel locking nut: 6061 aluminum (cut for heavy gauge strings)(0.013", 0.020", 0.024", 0.035", 0.046", and 0.056") or cut to your specific gauges if specified heel pocket: fender strat style (5/8” deep, 2.18” heel width, 3” total length, 5” radius heel curve) thickness: .700” at nut, .725” at 7th fret, .740” at 12th fret .760” at 15th fret neck shape: very flat u shape, maximum thinness without structural loss, no tapered heel includes: 4 stainless steel 1 1/2 “ 10-24 mounting bolts, backplate, buffing compound, and 2 microfibre cloths frequently asked questions why aluminum? when looking for a neck, there are a lot of different variables to look at. structurally, a solid billet of aluminum will offer the most rigidity of the option possible. there is no truss rod or other materials to stress and strain during temperature or moisture changes. additionally, that additional strength can help with the wear and tear of tour, stages, and other bumps and bruises any guitar will have to sustain during it’s lifespan. sonically, the density of aluminum may give you an advantage with more sustain and over tones, since the neck won’t sympathetically vibrate with the strings. this is, as with anything, certainly up for debate as to what your ears hear and your hands feel. it’s worth noting that it will feel colder to the touch since aluminum is a better thermal conductor than wood, and it does noticeably weigh more. will this fit my guitar? yes: for the most part, if you’re running a telecaster, stratocaster, or jazzmaster, you should be able to bolt this neck directly onto the body. maybe not: if you are running a t-60, jaguar, mustang, or 72’ telecaster deluxe; you cannot run this neck without modifications due to scale and bolt pattern restrictions. if you are confused and unsure, contact a local luthier to help you with your project. it’s a worthy profession to support and you’ll learn new things. if you are considering a guitar not mentioned here, then i’m not sure. can i do the change over myself? yes: most seasoned guitarist can probably do this, yes. but read this: i have pre-drilled the necks and they are tapped with machine bolts. you may have to adjust neck angle, saddle heights, and intonate your guitar afterwords. if your action is still too loose for your preference, a luthier can help you with adjusting the nut string depths to a tighter playing style. the depths are set fairly high to allow for adjustment after installation. what is the 700 series? the 700 series is the first set of necks that i designed, named after the thickness at the nut for the design. i will be continuing this convention for each style going forward, so anything with this thickness will be in the 700 series, and further designs may be in a new series for their specific design requirements. can i get something custom? short answer, yes: i can make a neck for any project. in the recent past i’ve also made custom guitars, hand-wired tube amps, cabs, a few different pedals and even a pickup. custom, multiple runs: if you are a guitar builder and are interested in ordering a batch of necks custom fit and finished for your company or brand, please reach out. i can offer discounts for custom work at scale. fully custom, one-off builds: if you have your sights set on something fully custom, i’d be glad to chat with you about your needs. this process is expensive. the new neck would need to be prototyped, engineered, manufactured, and then finished, all with processes and measurements outside of my normal set-up. you’d be looking at at least a handful of months and a starting price around $5,000. can i get mine cheaper? faster? no affirm asked me to add this, if you use affirm please read this or something like that if you finance with affirm and if one or more items in your order has an extended ship date, your loan payment(s), including interest, may be due before the

Bullet points: 1. for st electric guitar, great replacement for your st guitar. 2. 10mm head machine peg holes for tuner installation. 3. adjustable truss rod has been installed at the headstock. 4. canadian maple wood makes the sound more loud and clear. 5. with inlay dots on the side, it is convenient to distinguish the corresponding fret. descriptions: frets: 22 frets neck: canadian maple neck fingerboard: canadian maple peg holes diametre: 10 mm / 0.4 inch neck length: 66.5cm / 26.2 in neck depth: approx. 15 mm / 0.6 in (with fretboard 2.3 cm / 0.9 in) heel depth: approx. 2.0 cm / 0.8 in (with fretboard 2.6 cm / 1.0 in) size: approx. 66.5 * 5.6 * 2.5 cm / 26.2 * 2.2 * 1.0 inch neck weight: 630g/22.2oz package included: 1*guitar neck gender: male.

High glossy st electric guitar neck roasted flame maple 6 string guitar neck 22 frets strat guitar

About the proguc 1. for st electric quitar, great replacement for your st guitar. 2. 10mm head machine peg holes for tuner installation. 3. adjustable truss rod nas been installed at the headstock. 4. canadian maple wood makes the sound more loud and clear. and rosewood fingerboard awes a longer sound duration? 5. with inlay dots on side. it is convenient to distinauish the corresponding fret. specifications: item:guitar neck material: canadian maple neck+rosewood fingerboard fret :22 peg holes diametre: 10 mm / 0.4 inch clour :black neck length: 67 5cm / 26.6 in fretboard length: approx. 48 cm / 18.75 in neck depth: approx. 18 cm / 0.7 in(with fretooard 23 cm /0.9 in) heel depth: approx. 2.0 cm / 0.8 in (with fretboard 2.6 cm / 1.0 in) size: approx. 67.5 * 5.5 * 2.5 cm / 26.6* 2.2 * 1.0 inch weight: approx. 635g/22.4oz packagelncluded: 1x guitar neck

Our company is a professional musical instruments supplier. we can produce different kinds of electric guitars, bass guitars, acoustic guitars, guitar accessories,banjo.