Guitar Hinge Neck Shark Tank For Sale (2024 Update)

This official fender 1951 telecaster fat u maple neck has a vintage style substantial u shaped profile, 9.5" fretboard radius with 21, 6105 narrow/tall frets and a gloss urethane finish for smooth playability. the synthetic bone nut is pre-slotted with 'pilot' string slots to make spacing a breeze when performing the final string slot filing, the neck has 8.8 mm tuner bushing holes drilled on the headstock face for vintage style tuners with press fit bushings (some reaming of the hole may be required for a perfect press fit) and the truss rod adjustment nut is at the heel. this replacement neck is the perfect way to give your tele a classic 1951 style playing feel and fits fender or squier flat/square heel end telecaster guitars. some fret levelling/dressing and polishing may be required and minor woodwork to fit the neck to the body. please note the photo displayed is an example image only and the wood grain and serial number will differ on the neck you receive.

This official fender classic player '50s stratocaster maple neck has a vintage style soft v profile, 9.5" fretboard radius, 21 medium jumbo frets and a gloss urethane finish for smooth playability. the synthetic bone nut is pre-slotted with 'pilot' string slots to make spacing a breeze when performing the final string slot filing, the neck has 9.1 mm tuner bushing holes drilled on the headstock face for vintage style tuners with press fit bushings (some reaming of the hole may be required for a perfect press fit) and the truss rod adjustment nut is at the heel. this replacement neck is the perfect way to give your strat an authentic '50s feel and fits fender or squier curved heel end stratocaster guitars. some fret levelling/dressing and polishing may be required and minor woodwork to fit the neck to the body. please note the photo displayed is an example image only and the wood grain and serial number will differ on the neck you receive.

The name fender is synonymous with quality of the highest degree, so to upkeep these fine instruments requires only the best parts. official fender parts are specially designed to keep your fender instrument playing as well as the first time you picked it up. this 1970s vintage-style neck plate features an engraved "f" logo. it is designed for use on most fender guitars and basses using four-screw neck mounting without micro-tilt adjustment. mounting screws are included.

Wd angled paddle headstock 22 fret neck for fender stratocaster 22 fret neck pocket paddle headstock neck for guitar, unfinished, angled headstock, fits strat neck pocket, 22 fret, 12 in. radius, double action truss rod adjusts at headstock, position markers of both sides of fingerboard. all necks require a final level, crown, and polish and may need to be fine-tuned to your instrument and playing preferences. due to the organic nature of wood each neck is considered unique and may have minor variations in grain or finish from those pictured. wd does not sell what is commonly referred to as seconds or blems. wd neck heels are made to fender usa dimensions and tolerance, this may not account for neck pocket shrinkage or expansion over time. some neck pocket modification may be required.

Features: electric guitar kits for sg style electric guitar okoume wood body, maple neck & composite ebony fingerboard, with all electronic parts for diy it is easy to build your own sg electric guitar publisher: yg details: – okoume wood body, maple neck & composite ebony fingerboard – with all electronic parts for diy – it is easy to build your own sg electric guitar upc: 680168608067 ean: 0680168608067 package dimensions: 30.0 x 19.0 x 3.0 inches

* unfinished electric guitar kits *okoume wood body – maple neck & composite ebony fingerboard *white pickguard and all electronic parts – it is easy to build your own electric guitar the neck pocket

Roasted canadian maple neck,very stable and beautiful well selected two pieces mahogany body,beautiful grain and better for sound genuine rosewood fingerboard,good for play,not laminated rosewood all cavity drilled,better to paint and assemble bolt on neck joint,25.5 inch scale length,22 frets uncut headstock,suitable for diy headstock design beautiful abalone fingerboard dot inlay good quality roasted neck canadian maple diy electric guitar kits unfinished uncut two piece mahogany body genuine rosewood fingerboard fretboard all parts included electric guitar kit

Details: fret: cupronickel nut: abs dimension information tuner hole: 10mm width at nut: 42mm with at heel: 57.5mm( 0.5 mm deviation) thickness at heel: 27mm truss rod: two-way adjustable, 4mm allen wrench adjustable truss rod has been installed at the headstock. neck wood: maple frets: 22 frets

Sometimes you've got to go out and get the cool parts. (that's me). sometimes the cool parts show up at your house. (that's you).please read the description carefully as this piece is hand/custom made. this is an exceptionally well made and potentially collectable guitar neck. hand built by stephen carr. mr. carr was a new york based luthier who learned his trade from notable new york luthiers such as herk favilla and jimmy d'aquisto. steve carr is famous for building guitars for rock bands in the 80s. some iconic instruments were built for kiss during that time including the gene simmons axe bass and ace frehley's ufo guitar. several other instruments were built for kiss during this period. gene, paul and ace used them as their main stage guitars. steve carr died in 2006.you can find a nice interview about steve at acefrehleylespaul.com.the neck is made in the the style of a stratocaster and constructed of highly figured flame maple with a thick ebony fingerboard. it is…

We often get asked by our customers what tools or supplies they'll need to put together their solo diy kit. so to answer the demand, we've put together the solo guitar assembly kit. this kit contains all the necessary tools required to assemble and wire your solo diy kit with a bolt-on neck. all of the included items are made of the highest quality and will provide years of use. also available in set-neck version here. solo guitar assembly kit – bolt-on neck includes: solo pro fender/gibson guitar notched straight edge solomon 3 wire 40 watt soldering iron mg chemicals rosin core leaded .22 gauge solder solo multi spanner shinex sanding sheets solo pro fender/gibson guitar notched straight edge this specially designed guitar tool is used to check your guitar’s neck straightness of the fretboard and not just the frets. this is the only guitar repair tool to insure neck flatness before leveling your frets. one side is for 25.5′′ (fender) scale guitars, and the other side is for 24.75′′ (gibson) scale guitars. this notched edge is cnc precision machined for a flatness of +/- .001′′ and can be used with 21, 22, or 24 fret necks. notched to the 22nd fret with clearance for more frets and clearance for the nut on the other end. solomon 3 wire 40 watt soldering iron the solomon sh-813a is a 40 watt soldering iron with rubber sleeve for a comfortable grip. it has a 3 wire grounded power cord for safety. ideal for use with traditional leaded solder. mg chemicals rosin core leaded .22 gauge solder m.g. chemicals rosin activated flux formula is used in our flux-cored solder wire. it’s rapid wetting and fast flowing properties results in consistent and reliable soldering every time. cleaning becomes optional with our ra flux core because of its non-corrosive and electrically non-conductive properties. solo multi spanner this pocket-size toothed wench will tighten or loosen most nuts or thumb wheels found on guitars, like output jack, control pot, pickup switch, tuning machine and bridge thumbwheels. all edges and surfaces have been chamfered and polished to avoid damage to body and surrounding areas. shinex sanding sheets the shinex sanding sheets are a great alternative to standard sanding sheets/sandpaper. made of a c hemical fiber non-woven fabric abrasive, it’s clog-free and is a perfect thickness to fit comfortably in your hand, especially around curved surfaces due to it’s flexible design. you’ll be able to achieve an evenly finished surface without deep scratches. for convenience, perforations run through the center so it can be cut it in half. comes with 80, 120, 240, 400, 600, 800, 1500 & 3000 grit *this item is excluded from any promo codes or discounts item shown : solo guitar assembly kit – bolt-on neck model # : solo-guitar-assembly-kit-bolt-on

The original bolt on aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. it is designed to be an aftermarket fit with most stratocasters, telecasters, and jazzmasters. it comes with everything you need to replace your current neck with one from rgi. necks are built to order with your specifications, so expect up to a two month wait before receiving your neck. neck specs: material: 6061 solid billet aluminum scale: 25.5” nut width: 1 11/16” weight: solid billet: 3 lbs 3 oz, hollow richlite: 2 lbs 2 oz frets: 22 stainless steel medium/medium fretboard radius: 12” tuners: 3+3 sperzel locking nut: 6061 aluminum (cut for heavy gauge strings)(0.013", 0.020", 0.024", 0.035", 0.046", and 0.056") or cut to your specific gauges if specified heel pocket: fender strat style (5/8” deep, 2.18” heel width, 3” total length, 5” radius heel curve) thickness: .700” at nut, .725” at 7th fret, .740” at 12th fret .760” at 15th fret neck shape: very flat u shape, maximum thinness without structural loss, no tapered heel includes: 4 stainless steel 1 1/2 “ 10-24 mounting bolts, backplate, buffing compound, and 2 microfibre cloths frequently asked questions why aluminum? when looking for a neck, there are a lot of different variables to look at. structurally, a solid billet of aluminum will offer the most rigidity of the option possible. there is no truss rod or other materials to stress and strain during temperature or moisture changes. additionally, that additional strength can help with the wear and tear of tour, stages, and other bumps and bruises any guitar will have to sustain during it’s lifespan. sonically, the density of aluminum may give you an advantage with more sustain and over tones, since the neck won’t sympathetically vibrate with the strings. this is, as with anything, certainly up for debate as to what your ears hear and your hands feel. it’s worth noting that it will feel colder to the touch since aluminum is a better thermal conductor than wood, and it does noticeably weigh more. will this fit my guitar? yes: for the most part, if you’re running a telecaster, stratocaster, or jazzmaster, you should be able to bolt this neck directly onto the body. maybe not: if you are running a t-60, jaguar, mustang, or 72’ telecaster deluxe; you cannot run this neck without modifications due to scale and bolt pattern restrictions. if you are confused and unsure, contact a local luthier to help you with your project. it’s a worthy profession to support and you’ll learn new things. if you are considering a guitar not mentioned here, then i’m not sure. can i do the change over myself? yes: most seasoned guitarist can probably do this, yes. but read this: i have pre-drilled the necks and they are tapped with machine bolts. you may have to adjust neck angle, saddle heights, and intonate your guitar afterwords. if your action is still too loose for your preference, a luthier can help you with adjusting the nut string depths to a tighter playing style. the depths are set fairly high to allow for adjustment after installation. what is the 700 series? the 700 series is the first set of necks that i designed, named after the thickness at the nut for the design. i will be continuing this convention for each style going forward, so anything with this thickness will be in the 700 series, and further designs may be in a new series for their specific design requirements. can i get something custom? short answer, yes: i can make a neck for any project. in the recent past i’ve also made custom guitars, hand-wired tube amps, cabs, a few different pedals and even a pickup. custom, multiple runs: if you are a guitar builder and are interested in ordering a batch of necks custom fit and finished for your company or brand, please reach out. i can offer discounts for custom work at scale. fully custom, one-off builds: if you have your sights set on something fully custom, i’d be glad to chat with you about your needs. this process is expensive. the new neck would need to be prototyped, engineered, manufactured, and then finished, all with processes and measurements outside of my normal set-up. you’d be looking at at least a handful of months and a starting price around $5,000. can i get mine cheaper? faster? no affirm asked me to add this, if you use affirm please read this or something like that if you finance with affirm and if one or more items in your order has an extended ship date, your loan payment(s), including interest, may be due before the

Description: excellent maple wood: the guitar neck comes with adoption of excellent wood material, which has good hardness and toughness. easy installation: the guitar neck features the simple structure, bringing you quick and simple installation. wonderful polishing: the guitar neck enjoys excellent polishing, no burr, very safe to touch. 22 fret structure: the guitar neck is designed with 22 fret structure, which is professional and practical. fine craftsmanship: the guitar neck component enjoys excellent workmanship, long service life and good performance. specification:

This is a new product make by the wenge wood ! and i have many different types guitar accessories if you are interested in it please contact me! thank you for your business

I bought this as a paddle headstock, veneered the front and back, cut it into a shape *similar to*, but not the same as a popular headstock. this headstock shape is a little slimmer and the strings are straighter. the tuner holes are 10mm and fit gotoh and grover (tested!).i used this neck for a week and decided i like fatter necks with giant frets.this is a beautiful neck! the rosewood grain is straight and lovely. there are some light wear and the headstock could use a little sanding or reshaping if you prefer.the evo gold frets are smooth and pretty!in my opinion, they sound like nickel frets, but are slick like stainless.please see below for the specs.this neck currently has an oil finish.truss rod cover, logo, and truss rod tool included. neck heel is drilled for standard 4 bolt, fender deluxe contoured plate, and the import contoured plate.paddle-head guitar neckconstructionmodern tiltbackshaft woodmaplefretboard woodindian rosewoodunique choiceno, warmoth can choose for me.nu…

Up for sale is very rare norma guitar neck that is new old stock. this item is being sold "as-is" for parts and project and cannot be returned. as you can see from the pictures this neck has no drill holes for mounting tuners or holes for mounting it to a body. it has never been on a guitar and would be perfect for a norma in need of a new neck or a custom job. i believe the scale length is right around 24.75" like a gibson. heel width is 2.17". this neck has minor blemishes from laying around my friends shop for years but is still as nice as you will find anywhere else. please feel free to message me with any questions or offers.

This guitar neck prop is designed to hold your guitar neck up so that it is not leaning on a point of the headstock/tuners of the headstock. this allows for easier maintenance of the guitar, such as changing the strings. the mount has a foam pad so that it protects the guitars finish. it works with all kinds of guitars, electric, acoustic, and bass. this bracket is manufactured in the usa and 3d printed from pla plastic. our 3d printers are re-calibrated on a monthly basis, with every single print that comes off being inspected to ensure its quality before it reaches your door. our prints do not turn out like others, we use the highest quality settings possible and do not sacrifice quality for speed. if you are also interested in a custom part, please reach out!

Fretwraps stealth edition. black 3d logo over a brushed satin black band for an understated minimalist look. this new model has an improved hook-and-loop fastener, and features proven muting materials that are soft and non-damaging to your instruments, and looks killer on any guitar or bass. slide on a fretwrap to effectively cut overtones and sympathetic resonance during recording, live performance, two-hand tapping, or any creative situation where you need that extra muting hand for cleaner takes without the unwanted string noise or ringing. the adjustable strap lets you fine-tune the pressure and dampening of the strings. quickly slides over the headstock when not in use. no special guitar modification, installation, or tools required – yet amazingly effective! global patents pending and trademarks registered. buy originals only.

Heavy-duty nylon guitar shim – our bolt-on neck shims for guitars have been expertly crafted using high-end flexible nylon plastic. neck protection with no air pocket – these guitar plate shims have been carefully angled and molded in order to provide the exact angle of tilting you need with absolutely no air pocket, protecting your guitar's neck and base from wear and damage. perfect for guitar repair – whether you're installing a new sized bridge or simply repairing the neck, our guitar neck shims are designed to fit onto most electric guitars and basses. these are also available in the sizes 0.25°, 0.5°, and 1°. these guitar neck gaskets are also a great gift idea for any guitar player. no questions asked!

Make sure this fits by entering your model number. guitar fret bender, with adjustable thumbwheel, quickly adjust thumbwheel allows you to control radius. ergonomics crank handle design, practical and convenient, save time and effort. get a perfect bend on enough wire for a whole guitar in just seconds. it can be adjusted for various specifications and models, convenient and practical. a convenient fret wire bender tool for luthiers. precisely radiused fretwire makes your fretwork fast, accurate, and professional. package includes 1 x fret wire bender, 2 x hex wrench.

Diy guitar body solid okoume wood body neck pocke widtht: 2 1/4" the pocket height : 3" the pocket depth : 3/4" – diy guitar body,, only body available as listing picture showing – okoume wood made body, neck pocke widtht: 2 1/4", the pocket height : 3" the pocket depth : 3/4" – unpolished body, weight: 3lbs