Are you looking for the Guitar Amp Load Box? If so, you’ve come to the right place.
Choosing the Guitar Amp Load Box can be difficult as there are so many considerations, such as BOSS, Marshall, Fender, Peavey, Roland, Line 6, Crate. We have done a lot of research to find the top 20 Guitar Amp Load Box available.
The average cost is $264.98. Sold comparable range in price from a low of $29.99 to a high of $607.99.
Based on the research we did, we think Suhr Reactive Load Box is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Guitar Amp Load Box (20 Sellers)
Product Image | Product Name | Features | Check Price |
---|---|---|---|
|
|
||
|
|||
|
|
||
|
|
||
|
|||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|||
|
|||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|||
|
|||
|
$269.99
4.8
Features:
- Rms power of 150w delivers a high-quality audio for an immersive sound
- The xlr jack offers convenient connectivity with compatible devices
- The -20db attenuator lets you attain cranked-amp tone even at low volume
Reviewers Noted:
Quality build . Ease of use . Sound quality
Features:
- Description
- Passive 100-watt power attenuator allows you to get the ultimate overdriven tone at any volume
- Multi-impedance input connectors (4, 8 and 16 ohms) to match virtually any amplifier
Reviewers Noted:
Good sound quality . Easy to use . Quality build . Portable . Weight
Features:
- A compact 10 watt guitar amplifier with a suitable 8 inch speaker
- Three types of pre-set cosm amps: clean, crunch, lead
- Easy replacement of pre-installed amps with other amps thanks to the free cube kit app for ios and android terminals
$269.99
4.8
Features:
- Meticulously designed to provide high-quality audio for an immersive sound
- Xlr interface provides a reliable connection with compatible devices
- Phantom power of 48 v delivers consistent power supply for efficient performance
$123.69
4.7
Reviewers Noted:
Portable . Good sound quality . Quality build . Easy to use . Attractive
Features:
- Power output: 5 watts
- Speaker: 5"
- Batteries: runs on 6 aa batteries
Reviewers Noted:
Sound quality . Portable . Attractive . Lightweight . Easy to use
Features:
- Power: 1 watt
- Headphone output
- Battery operated
Reviewers Noted:
Ease of use . Build quality
Features:
- The output impedance of 600 ohms reduces distortion for high-quality audio
- Enjoy every beat of your favorite music with its 100 watts peak power
- Usb interface allows you to connect it easily with compatible devices
Reviewers Noted:
Quality build . Ease of use . Sound quality . Visual appeal
Features:
- All tube design (solid-state diodes used only for full-wave rectification)
- 5w output power into 8 ohm
- Vintage channel controls: bass, treble and volume
Reviewers Noted:
Quality build . Good sound quality . Attractive . Power . Weight
Features:
- Dimensions (overall): 15.7 inches (h) x 23.7 inches (w) x 34.0 inches (d).
- Weight: 66.0 pounds.
- Style: cabinet.
Features:
- The perfect way to optimize the input voltage for your tube amp.
- Dramatically improves your amp's performance!
- Optimal input voltage extends the life of your power tubes.
$349.00
5.0
Features:
- Dimensions (overall): 5.9 inches (h) x 8.26 inches (w) x 11.6 inches (d).
- Weight: 5.13 pounds.
- Style: instrument.
$349.00
4.7
Reviewers Noted:
Easy to use . Sound quality
Features:
- Multiple knobs make it convenient to modulate the tone of your guitar as desired
- Led indicator offers the real-time working status of this cabloader
- The xlr output provides a secure and reliable connection
$65.00
4.6
Reviewers Noted:
Easy to use . Compact . Sound quality
Features:
- Amp box
- Measures 3.6 x 1.5 x 1
- 584-608 mhz
$385.00
5.0
Reviewers Noted:
Ease of use . Sound quality
Features:
- Rack-mountable design helps provide convenient installation
- The 100 w power supply of this digital load box offers hassle-free usage
- Its 8 ohms impedance amplifies the input signal for a quality output
$69.99
4.6
Reviewers Noted:
Portability . Size . Ease of use . Sound quality
Features:
- Aluminum build helps make this load correction device lightweight and durable
- Guitar strap bracket allows you to install it easily
- Conveniently adjust the tone of electric guitar with its load control switch
$79.00
4.6
Reviewers Noted:
Ease of use . Sound quality . Portability . Build quality
Features:
- Powerful 10-watt solid-state guitar amplifier, ideal for home use and practice
- 2 full-featured channels offering everything you need from sparkling clean to super-fat overdrive and everything in between
- Revolutionary vtc (virtual tube circuit) technology reproduces real tube-like tone, touch and feel
Features:
- Great for recording, without the need of a cab
- Selling it cause i dont use it anymore since i've entered the axe fx world
- Come with power cable and manual, used once for a gig, then was always in the studio
Features:
- This 2000-watt speaker helps deliver a loud and rich sound quality
- Its frequency response of 62 hz to 20 khz supports a wide range of audio
- The electronic clip protection circuit helps prevent over driving of the speaker
Features:
- The -15db pad reduces distortion for a clear and detailed sound
- Stereo-to-mono merge function offers easy connectivity with various types of inputs
- The eclipse et-db3 transformer adds a dynamic feel to the audio
1. Suhr Reactive Load Box
Product Details:
The suhr reactive load takes the place of your speaker cabinet in your signal chain. it provides an 8ω load for your tube amplifier (maximum 100 watts), and produces both balanced and unbalanced signals that connect with effects, power amps, and recording equipment. it also has an optional thru output to connect to speaker cabs. use it with any impulse responses you have for a great quiet recording and playing experience.
Specifications:
SPEAKER INPUT IMPEDANCE | 8 Ohm |
DI / LINE OUT LEVEL | +4 dBu at 7 watts input, maximum level setting |
BALANCED LINE OUTPUT IMPEDANCE | Less than 6KΩ |
UNBALANCED LINE OUTPUT IMPEDANCE | Less than 6KΩ |
MAXIMUM RECOMMENDED INPUT POWER | 100 Watts RMS |
ROHS COMPLIANT | Yes |
DIMENSIONS | 8.8" (W) x 8.9" (D) x 3.6" (H) |
Reviews:
Sono stato indeciso fino all'ultimo se investire in un torpedo captor o in questo suhr. Alla fine ho optato per il suhr perchè dalle demo su youtube ne preferivo la timbrica, ma sempre con il dubbio:vale la pena spendere la bellezza di 250 euro in più?…però si vive una volta sola e mi sono buttato. Una volta attaccata la mia dual rectifier tutti i dubbi sono svaniti. Il piacere di suonare la propria testata con volumi contenuti e con tutta la versatilità degli impulsi di cassa è impagabile. In più il suhr è grosso, da un senso di solidità e la ventola è molto silenziosa. Se devo affidare la mia testata ad una loadbox, preferisco che sia a prova di bomba. In più il suono e feeling è pazzesco, mai avuti dei suoni così. Consigliatissimo.
Best reactive load box for build and more importantly tone. not all reactive loads are the same!lcuj
2. Two Notes Torpedo Captor Loadbox Attenuator Di 8 Ohm
Product Details:
Note only been in my home studio. works great. scratch on top. white paint easily comes off so be careful. attenuate your amp, record direct with speaker emulation, and moreplay your tube amplifier at neighbor-friendly volume levels, or play without a speaker cabinet at all, with the two notes torpedo captor reactive load box, direct box, attenuator and speaker simulator. based on the acclaimed torpedo reload, the torpedo captor is your solution for attenuating your amp's volume as well as sending your tone direct to a pa or recording system. suitable for amps up to 100 watts, the torpedo captor's -20db attenuator allows for cranked-amp tones at lower volume levels. and built-in speaker simulation allows you to record the full sonic intensity of your amplifier direct to your daw, without miking up a speaker cabinet.
Specifications:
Power Output | 150W RMS |
Connector Size | 1/4" |
Connector Type | XLR |
Input Impedance | 4, 8, 16 ohms |
Minimum Bandwidth | -20 dB |
Reviews:
I bought this for the attenuation to be able to run my amp all out without upsetting the neighbors. This unit does that well and so much more. Wall of Sound is amazing and has been my go to for direct recording since I first tried it. The DI feature is going to be great for live performances too— I demoed it with my PA and it sounds great— beats micing. The price is right too. I recommend this highly.
This is the most affordable loadbox I could find that had good reviews. I've been using it every day since I received it and it does a great job. I have all my tones from my tube amps while recording and playing silently. Complementary Wall Of Sound IRs sound great and this completely solves my problems with recording at home. I highly recommend it.Reviewed by Andertons Music Co.
Dead easy to use, speaker in goes to the thru (0 attenuation)or -20 DB out. Juice the output of your amp and keep the DB down. Works great with speaker or without. Comes w/Wall of Sound download thats a great gateway to IR and silent recording. Must have to not annoy family or neighbors. Or both. Highly recommendGearJunkie35
3. Bugera Ps1 Power Soak Passive 100w Power Attenuator
Product Details:
Good little attenuator. the nice thing, besides price, about this attenuator is you can select your ohm output from 4, 8, or 16. so if you have multiple amps with different ohm outputs, you can use this for multiple amps. wouldn't actually try a 100 watt amp with it though, it's not robust enough to truly handle 100 watts, no matter what bugera tells you. anything less is fine. there are just a few hours on this as i've upgraded to an ox box. includes a printed manual.
Specifications:
Product Type | Passive power attenuator |
Designed For | Guitar, bass amplifier |
Total Output Power | 100 Watt |
Impedance | 4, 8, 16 Ohms |
Controls | Line, soak |
Connections | Audio line-out – phone 6.35 mm Speakers output – phone 6.35 mm Emulated mic output – XLR 3 x amplifier input – phone 6.35 mm |
Warranty | 3 years |
Width | 5 in |
Depth | 6.8 in |
Height | 3.6 in |
Weight | 2.87 lbs |
Reviews:
Great piece of kit. I am using it along side a 40watt h&k tube. When full powersoak is initiated, basically half the power is coming out the speaker. Incredible to be able to play a fully cooking 40 watt tube and having the output at living room audible level. Outstanding bit of kit for the price. Emulated mic if you are going to mixer, not that great but if you are using it for live play. It is absolutely perfectReviewed by Andertons Music Co.
I have a vintage 1978 Marshall 50w JMP half stack that was gathering dust in my studio. We all know that 50 Marshall watts is closer to 75w when dimed. With no master volume or effects loop I was seriously considering selling this rig as it was too loud for home studio use. This Bugera PS1 solved my problem!!!!! The unit is very well made, has three input options 4/8/16 ohms & most importantly a balanced mic emulation XLR & unbalanced line out. I tested these outputs on my Tascam 24 track & it sounds fantastic. I put the line out & xlr out into separate tracks & I got the classic Marshall sound we are looking for. I had my heads volume around 7-8 & used 4 ohm out. I attenuated till I could hear my guitar strings strumming. Even though the PS1 is rated 100w, my 50 w head got the PS1 pretty “toasty” so make sure you have plenty of air around it.marstegreg
I have a Princeton reverb amp that I love the sound of but always have to play it on the quiet channel. The amp sounds great but really springs into life with the volume dialed at 4.5. This is fine on the quiet channel but is still too loud late at night. Also, I'd been watching lots of reviews of the amp on YouTube and seen that it is capable of much more than I was making use of but that it meant cranking the volume. The Bugera PS1 had loads of great reviews so I thought I'd give it a go. Wow! Firstly I noticed that it removed the noise floor of the amp making it pretty much silent when not playing. I can now run my amp in the normal channel with the volume at 10 (though I prefer 4 to 8) and not disturb anyone else in the house (too much ). I've now got several new setting options to use with my amp from gloriouscleans to varying degrees of overdrive. I also found that recording is now easier with the reduced noise when mic'd and the line out works great as well. It's a really solid bit of kit that has breathed new life into what was already a great amplifier.Reviewed by Andertons Music Co.
4. Roland Cube 10gx Guitar Combo Amplifier
Product Details:
With its impressive sound, built-in effects, and the ability to swap cosm amp types via a free app for ios and android devices, the cube-10gx is the perfect small amp for jamming, bedroom practice, and recording. built to the respected cube standard, the cube-10gx delivers big, full tones with its custom 8" speaker and heavy-duty cabinet design. clean, crunch, and lead amp types come ready to play from the factory, but you can easily switch them out from your favorite mobile device. the cube kit app includes multiple amps to choose from, including vintage classics, ultra-heavy gain machines, and even amps for bass and acoustic-electric guitar. the compact cube-10gx also includes options for shaping your tones even further with three-band eq and onboard chorus, delay, and reverb effects. – big sound, compact package – packing versatile amp sounds, simple-yet-powerful tone controls, and high-caliber effects, the cube-10gx is ideal for both beginning guitarists and experienced players looking for a great sounding small amp. renowned cube construction quality provides rich, full sound and maximum durability, with a custom-designed 8" speaker, ultra-rigid cabinetry, h – compact 10-watt guitar amp with custom-designed 8" speaker – three preset cosm amp types: clean, crunch, and lead – replace preset amps with custom cosm amps via the free cube kit app for ios and android devices – three onboard effects: chorus, delay, and reverb (including plate and spring reverb types)bass, middle, and treble tone controls – rec out/phones jack provides high-quality direct tones for quiet practice and recording – aux in jack for jamming with an external music player
Specifications:
Amplifier Type | Solid State Guitar Amplifier |
Application | Performance |
Power | 80 Watts |
Speaker Size | 12" |
Number of Speakers | 1 |
Stereo | No |
HF Driver | No |
Channels | 2 |
Compressor | No |
Effects | Reverb Only |
Effects Loop | Yes |
Direct Output | No |
USB | Yes |
Bluetooth | No |
Aux Input | No |
Headphone Output | Yes |
Footswitch Input | Yes |
Footswitch Included | No |
Cover Included | No |
Display | No |
Power Supply | Internal |
Reviews:
This is a remarkable little amplifier. The positive reviews are all justified. Very diminutive, even senior management, who tends to frown when black boxes arrive, approves. And it produces a variety of great tones in remarkable amounts bearing in mind its small size. Perhaps not for the O2, but great in our lounge and enough muscle for a small venue before it gets a bit chesty. Very happy.biga268
I use it for practice. Although it has a bass setting you can program via the phone kit, the speaker is not as good as a basic bass amp like a fender rumble. The default presets sound the best, and if you need a different sound, it's probably best to use pedals on the clean setting. The effects aren't as good as I hoped for. The chorus effect is nice; but delay, reverb, and spring could be loads better. It gets the job done and I wasn't needing the other effects to be there at all so a good purchase for me, but if you need all the features to be awesome, look elsewhere.Waukegan
5. Two Notes Torpedo Captor Loadbox Attenuator Di 4 Ohm
Product Details:
The torpedo captor is the little brother of the award-winning torpedo reload. the torpedo captor is an easy to use reactive loadbox perfect for unleashing your favorite tube amp in a variety of modern applications and venues. if you just require attenuation from your amp to your cab, captor has you covered. and if you want an easy and modern way to record your tube amp, captor is simply “load” and record.
Specifications:
Speaker Type | Analog |
Input Impedance Type | Adjustable |
Admissible Power | 100 W |
Output Interface | XLR |
Attenuation | -20 dB |
Reviews:
I bought this for the attenuation to be able to run my amp all out without upsetting the neighbors. This unit does that well and so much more. Wall of Sound is amazing and has been my go to for direct recording since I first tried it. The DI feature is going to be great for live performances too— I demoed it with my PA and it sounds great— beats micing. The price is right too. I recommend this highly.
This is the most affordable loadbox I could find that had good reviews. I've been using it every day since I received it and it does a great job. I have all my tones from my tube amps while recording and playing silently. Complementary Wall Of Sound IRs sound great and this completely solves my problems with recording at home. I highly recommend it.Reviewed by Andertons Music Co.
Dead easy to use, speaker in goes to the thru (0 attenuation)or -20 DB out. Juice the output of your amp and keep the DB down. Works great with speaker or without. Comes w/Wall of Sound download thats a great gateway to IR and silent recording. Must have to not annoy family or neighbors. Or both. Highly recommendGearJunkie35
6. Pignose 7-100 Legendary Portable Amplifier
Product Details:
This item was returned in mint condition. it is free of any performance issues, and has no scratches, blemishes, or other cosmetic flaws. the pignose legendary 7-100 portable amp is their original portable practice amp, complete with pig-snout on/off switch and volume control. the case opens for easy access to the amplifier's speaker and other insides. you can even have a friend fan the case open and closed for a wah-wah effect! the legendary pignose amp also offers a preamp out jack for plugging those classic distortion sounds into an external power amp, pa, or recording console. this little pignose is a quality-built amp with metal corner protectors, tough covering, and a rugged 6"speaker. the portable pignose legendary 7-100 weighs just 5 lbs and runs on batteries or its optional power supply.
Specifications:
Reviews:
First off I'm an old school Sound Engineer. This little Amp does it all. It has so many uses even though it is so simple. It will teach you to learn to use the controls on your guitar better. Unlike several modeling amps this little piggy takes most stomp boxes GREAT!! Maybe he best feature is its Pre Amp Out which allows you a line into the PA or it will blow you away going into the input of your tube amp giving you a realist boost over any stomp box. At low volumes using the proper guitars pickups sparkling cleans. and this Piggy was made to be dirty. Best tool to have as a back up. Great traveling amp. Battery Life is goes a long way just get rechargeable and carry a small battery recharger in its little closed stash compartment. I don't recommend using the power cord. I'm sure there are some youngsters that differ with me but the old schoolers that like it raw and understand how to dial in their tone without playing with mods will dig this amp/fuzz box. If you have a nice clean tube amp but want some growl and extra volume pre amp this baby into your amp. I have several pedals and over drives and most all become thin bringing up the volume compared to this. it just gets thicker and more meaty as you increase the vol. My buddy are blown away with what comes out of the PA with this little Piggy and just a couple of effects my 86 RAT with this work well together.Cool mixes
I have the tweed covered version of the legendary 7-100, so it sounds the same as the leatherette covered version. I was very surprised at the rich tone of this amp. I am using it with 6 AA's not the power supply (dont know what difference that makes tonally) and it sounds like a tweed champ. You can get clean tones that have just a touch of twang with single coils or weaker humbuckers (gretsch) at a lower volume and form 1/4 of the way up you get progressively more and more tweedish ( let's face it-tweed breakup is basically distortion that fuzzes up as the gain increases) type distortion. With a tele you are in rolling stones territory, and with a humbucker equipped guitar you are in Neil Young land. It is awesome for recording, just stick your mic in front and go! It takes pedals well also. I love the simplicity-no time spent tweaking controls, plug in and rock. That said; this is not an ideal amp for a young beginner guitar player. A young kid will not appreciate what this amp gives. But for experienced players who like a "tweed' tone at a dirt cheap price this cannot be beat. Also, dont listen to the nonsense from guys who own one of the "original" ones that these new ones are no good-that's crap. The circuit has not changed regardless of who constructs it.padraic9143
Mr. Chatter is a great. The Pignose sounds line a vintage amp that gives you vintage guitar sounds from the 60s and 70s. This is a real analog amplifier not digital modeling The. Pignose is hand made and a quality piece of gear that will give many years of enjoyment with its rugged construction and quality components. The Pignose is surprisingly loud and versatile. The output jack allows you to send the Pignose to an amp or power amp/PA. I recommend getting the wall wart to save battery usage for outside use. Even the adapter fits inside of the Pignose. I got the original brown and it goes with home decor very easily. The Pignose can do cleans, overdrive and fuzz tones and does well with single coil pickups. The Pignose is very dynamic and you need to use your volume knob and hand to control the amp, like a real tube amp. Inwish I got a Pignose years ago. It is not a gimmick … its a real quality amp for children, adults and recording professionals.tnak4528
7. Fender Mini Deluxe Amp
Product Details:
The fender mini deluxe amp has a level of detail unmatched by any other mini amplifier. functional "dogbone" handle, chrome control plate, mini chicken-head knobs. and the mini deluxe has fender tone, too! one watt of powersingle 8 ohm, two-inch speaker9v battery-poweredheadphone out
Specifications:
Weight | 5 lb |
Reviews:
I picked this up for my son so he could practice around the house. Killer stocking stuffer! When the son is away the dad will now play. I started playing my Mustang Bass through this and it did the job. It's a small amp, not a practice amp. This is perfect for camping trips, rocking at the office or kicking it in the backyard. Oh yeah and you can plug in 1/4 headphones and keep the concert to yourself. It runs on a 9-volt battery or you can plug in a 9-volt adapter.SERGIO
Took a chance on this and purchased it without every playing it. Watched video reviews on it and gave it a shot. Yes, I know that it's small in size, smaller than a kids lunchbox but I hoped it'd produce quality sound and what I got was muddy sounds at increased volumes. It's not clear sounding and my goal to play through an amp is to sound good and I felt if I actually played this in front of people, the muddyness would make me sound amateurish. So, for what you pay for this, yes, you get amplified but it's not real great quality, unless you're a metal player because you don't get a clean sound from this. I rate this 3 stars because it's convenient to have a portable battery operated tiny amp that you can plug into and get sound from, however, the quality almost makes you not even want to play it.Jesse
This ain't no micro cube or vox. This less than 20$ & runs on 1 9v battery or 9v plug in the wall.(transformer not included)& Holy Friggin' Smokes does this baby perform.Monster overdrive tone & super bright, clean tone.Headphone input.Probably exceeds 60 decibels,which is beyond city ords. could get U a fine it's so damn loud. My Strat Squire sounds soooo Fender good out of this lil sucka & my electric/acoustic, sooo crisp.Ultra light to carry around.I've been using the JOYO mini,I love it,plug in,no chord,fun but this Fender mini is a bit more.More tone options and louder.I've yet to find out how quick it eats batteries. The JOYO burns them up fast.Get the rechargeables.Also the JOYO has an MP3 input.This doesn't. I run guitar strap thru the handle so the chord is like non-existent or U can old school it and have a 10 or 20 ft chord.So light it can be pulled over by the chord.These mini amps also pick up radio signals. When I turn them on I can hear radio stations at certain angles. So get 1 for the road.It's all about the fun.annoyingted1
8. Suhr Reactive Load Ir
Product Details:
Suhr reactive load ir in mint condition. allows you to run your tube amp or head straight to your audio interface without a cab connected. works with pc/mac and can output to your audio interface, headphones or foh without a speaker cab. comes preloaded with 16 speaker ir's or you can install your own over usb. if you have a tube amp but you cant crank it and you want to start recording, this is what you need! has a few other cool features also. probably one of the best speaker ir boxes on the market. used in my smoke free home. no issues. comes with power supply. no retail box or user manual. very easy to use and you can download the user manual if needed from the suhr website.
Specifications:
Number of Knobs | 3 |
Dimensions | 8.8" x 8.9" x 3.6" |
Weight | 6.7 lbs |
Maximum Output Impedance | Up to 600 ohms |
Interface | USB |
Reviews:
This is a high quality, well built product. It really does sound very smooth and responsive like a real amp. I own the original reactive load and wanted to upgrade to a plug and play option for practice that I could also take to shows and guarantee quality through the sound guy. I loaded it up with Ownhammer IRs (even though the Suhr IRs are great) and hook up a drum sample pedal to practice and write music. I love the dual outs (one with after the preloaded IR and one unfiltered so I can use a different IR in my DAW). I apply a little eq thru a plugins and no one – not a single sole – could actually tell the difference on recordings. It sounds professional and my family and ears never felt better. PSA – Find a few good IRs you really love and dont change them. You will get better, CONSISTENT results that way. Option paralysis is real.drewmac3
The combination of a reactive load and IRs is just greattomrandresen2012
9. Kit-Mod 102 Diy Guitar Amplifier
Product Details:
Mod 102 guitar amp kit features: all tube design (solid-state diodes used only for full-wave rectification). 5w output power into 8 ohm. 1 channel vintage channel. controls: bass, treble and volume. vintage pilot lamp and screw-on jewel cover for power-on indication output impedance: 8 ohm tubes included: one 12ax7 (preamp), one el84 (jj electronic brand) hammond mfg 269ex power transformer and p-t31 single ended output transformer cathode biased class a power tube operation (no bias adjustment needed). point to point hand wiring using terminal strips. carbon film resistors metalized polyester coupling caps pre-punched steel chassis. assembled kit weight: 4.25 lbs. assembled kit dimensions: 10" width x 6" depth x 5-&frac 18;" height mod 102 instructional features: detailed, easy to follow instructions include high resolution computer drawings for parts list and every step of assembly.
Specifications:
Vintage channel controls | bass, treble and volume |
Output Impedance | 8 Ohm |
Tubes included | one 12AX7 (preamp), one EL84 (JJ Electronic brand) |
Assembled Kit Weight | 4.25 lbs. |
Assembled Kit Dimensions | 10" Width x 6" Depth x 5-⅛" Height |
Reviews:
I just completed my Mod 102 kit. An excellent experience! I was delighted with the quality of components, clarity of instructions, and, perhaps most importantly, the sound of the amp. It is very loud – currently running into my Fender Twin Reverb cab (2×12) and very sweet! I will be running it into a new 1×12 cab with a new Celestion G12 M Heritage 'Greenback' when I get a case for the speaker (on order). My only criticism (and something to look out for) is that the chassis is very nicely painted in gray gunmetal paint. Even following the directions to file all the holes, it is very hard to get a good ground connection at every point a terminal strip connects. I worried about this, and about 1/3rd of the way through the build, took an ohm meter to check all the connections, and as I had suspected, some of the connections were not great (9-10 ohms or so!) So I removed the terminal strips (with the components I had already soldered still attached) and scraped away the paint under the tabs of the strips to ensure a good connection. Re-testing showed virtually zero resistance. I'd strongly recommend scraping the paint away at all holes under the chassis before getting started on the build. Even better, suggest that Amplified Parts leave the inside chassis unpainted (at least around the important holes). Aside that one criticism, I am delighted with the kit and with Amplified Parts. Everything was delivered promptly and they are a class outift. I'll probably try some of their other kits soon.vpmerlyn
I spent three evenings building the MOD102. The instructions are very easy to understand and the amp has a great Fender sound. I had one grounding issue that was easily fixed with a little help from tech support, which was excellent. If you're good at following step by step instructions and can solder well this is a fun little amp to build. Only small issue is the labels. They could stand an improvement.Brandon
I just finished this amp build and it sounds fantastic! I also just finished a Marshall 18 Watt clone and I have to say that the Mod102+ holds its own very nicely alongside the Marshall. In fact, I will probably use the Mod102+ for recording because it sounds amazing at lower volumes (the Marshall is loud AF). Honestly, if I were only going to build one of them today, it would be the Mod. I'm blown away by the tone! Great kit with excellent instructions. Great bang for the buck. The parts all seem to be top quality. I love the old style cloth solid core wire, too. I find it much easier to work with than modern stranded wire. The labels are a bit lame but I covered them with packing tape as suggested before cutting them out and they look fine. If you're thinking about building an amp, build this one.danjbeckett
10. Monoprice 30-Watt 1×12 Guitar Stack Tube Amplifier With Celestion V30 And Reverb – Stage Right Series
Product Details:
In a guitar amp world filled with digital emulators, the vacuum tube (or valve) remains the undisputed king. three industry standard 12ax7 tubes drive the preamp section, while two pairs of el84 tubes generate 30‐watts of output power. the clean and overdrive channels are selectable and reverb can be turned on or off using the included 2‐button footswitch. a 3‐band equalizer section allows you to really dial in and customize your sound. included in the bundle is a 1×12 cabinet featuring an industry standard celestion vintage 30 speaker. found in virtually all pro and touring rigs, the v30 creates enormously detailed and complex overtones, a warm low‐end, and a famously rich vocal‐like mid‐range. the celestion v30 sound has been captured on thousands of recordings from a diverse range of notable players, including slash, steve stevens, and peter frampton. if the product you purchase does not satisfy your needs, send it back for a full refund. if the product you purchase does not satisfy your needs, send it back for a full refund. quality at a fair price monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices.
Specifications:
Speaker Type | Celestion Vintage 30 |
Power amplifier tubes | 4x EL84 |
Preamplifier tubes | 3x ECC83/12AX7 |
Built‐in effects | Reverb |
Eq controls | Bass, Middle, Treble |
Amplifier load range | 8 ~ 16 ohms |
Hum and noise | ‐75dB below rated power |
Voice Coil | ø1.75" rounded copper |
Dimensions | 20.1" x 18.5" x 11.7" (510 x 470 x 297 mm) |
Magnet | 50 oz. ceramic |
Maximum Power Consumption | 100 watts |
Input Impedance | 1 megohms |
Output Power | 30 watts |
Sensitivity | 100dB |
Rated Power | 60 watts |
Driver Size | 12" |
Total Harmonic Distortion | 0.5% (clean mode) |
Frequency Response | 75Hz ~ 5kHz |
Input Power | 100 ~ 240 VAC, 50/60 Hz |
Inputs | 2x 1/4" TS (Lo and Hi) |
Nominal Impedance | 8 ohms |
Reviews:
I had to make myself stop playing this Amp long enuf to write my review. This 30 watt 1 X 12 Celestion V30 Tube Stack simply Rocks my World! Bucket List item for me! Always wanted a Tube Stack with a creamy rich mid – range and a narly distortion channel. Foot switch turns reverb and overdrive on and off. 3 band EQ, 1/4" speaker cable. I love me some pedals and they blend well with this Amp. Quality build. Simply the best Amp my Guitars have played. Jazzmaster , Kramer and Mike Rowan all sound amazing. Arrived quickly in sturdy and well packaged shipping cartons. Guitar World review was spot on. peace, MarnyeMARNYE
Very nice tones from this amp, clean or dirty! I have been using it mic’d with a 609 clone, haven’t had the chance to crank it yet. I use a roadhouse Strat and fine on the dirty channel with the gain at 5 I can get a great, clear cleanish tone, and then hit the Strats preamp and have some nice grit! Not fizzy fuzzy grit, but nice organic breakup that is very pleasing to the ear. I run a TC Plethora in the FX loop and get great results, no jump or drop in volume, just sounds natural. For some extra gain I use a Boss OD200 into the front of the amp, glorious!! Quite surprising that an amp of this build and sound quality is available at this price point but it is and I’m glad I pulled the trigger on it. Looks to be plywood for amp cab and speaker cab, nice touch. All this and a V30 speaker! I don’t know when or if the speaker will “break in” but I’ll be using the amp mic’d most of the time so it may take awhile, and honestly couldn’t imagine it sounding any better! Only had it a few days, and haven’t moved it since I set it up so I can’t speak for how long it will last in the long run, but fingers are crossed.Ronald
Just received my stack on 3/16/20. Packaged great!. Overall build quality is very very good no particle board here all real solid wood cabinet for the head , speaker with a nice ply baffle I think it's 3/4 ". Light weight. Asthetics ,cosmetics tolex and Grill cloth with piping perfect. Reverb is digital no tank or Springs here it is not tube driven. Bright switch works great pedal for Reverb and gain Channel works great extra-long cable to connect the head to the cabinet with power cord great. Clean tones on this amp whether a low or hi channel are amazing . kind of somewhere between vox/ marshall cleans. Definitely Fender sounding w bright switch. Gig Worthy!. Loud amp!. Digital Reverb is okay. You must turn it up to around 4 or 5 to hear it. It's clean channels are where this amp shines . On the gain channel, Ican get some good tones but not super high gain here more in the classic rock 1960- 1970's tone. Great but no super High gain. Kinda on the thinner side, Not very Fat. 3 chinese 12ax7, ( maybe a swap out in this area may give better tone), all 4 el84 Are Eurotube JJ'S!!!! So happy to see this. Celestion V30 spkr cab sounds great, full with depth. Classic rock tone!. Highly recommended..strange looking chinese power tnsfrmr, but Ot looks good. Voiced similiar to monoprice. 15 watt duel el84 model, but not as aggressive. Blows away the Bulgara V22.. Etc. Nice product monoprice!New User
11. Amprx Brownbox Amplifier Voltage Attenuator
Product Details:
If you want to get the best possible sound from your tube amp, you need a brownbox. standard 120v ac wall current is typically too high for vintage tube amps. the amprx brownbox lets you bring that current down to an optimal level. results in significantly improved amp performance and increased tube life. whether you're a professional recording engineer or a tone purist, if you want to get the best possible sound from your tube amp, you need a brownbox all tube amps (especially vintage amps) are designed to run at an optimal voltage, and standard 120v/ac wall current is typically too high for vintage tube amps, as well as some modern designs. with its proprietary 5-amp transformer and flexible attenuation options, the amprx brownbox lets you bring that current down to an optimal level, resulting in significantly improved amp performance and increased tube life.
Specifications:
Product Dimensions | 13 x 10 x 8 inches |
Is Discontinued By Manufacturer | No |
Color Name | Brown |
Power Source | AC |
Reviews:
Works perfect, built like a Tank. No hum like the variac I had. Use this with a '68 AB763 silver face drip edge blackline Super Reverb. My line voltage was consistently 125. I drop the voltage to 117 or below. Now I can crank the amp without blowing the 2amp fuse. Would recommend this for all vintage amps. Smooths out my Mark V as well.Ken
12. Koch Loadbox Ii Power Attenuator, Di Box And Speaker Emulator 16 Ohm
Product Details:
The koch loadbox ii power attenuator, di and speaker simulator is an innovative multi-tool, which should be found in every serious guitar player's kit. the loadbox offers solutions for many situations — from live gigs, to rehearsals, to home and studio recording. koch understands that quality, tone and clarity are very important to guitar players. therefore they designed the loadbox ii with extra heavy-duty components, stainless-steel housing and a host of features. as a straight output power attenuator, the loadbox can handle a continuous 120 watts at any of 7 output levels with unparalleled clarity, and without loss of tone. the user also has the choice of various outputs to channel the attenuated signal such as: single or multiple cabinets (depending on impedance), padded or non-padded direct outputs, a transformer balanced xlr di output and line output for pa/recording. the di and line outputs both share voicing switches for microphone placement and cabinet style, allowing the user to use the loadbox as a speaker simulator in any situation from studio recording to live performances. the loadbox can also be used as a straight transformer balanced di box with speaker simulator, or to convert almost any amp into a headphone amp for rehearsing and practicing. size: standard.
Specifications:
Impedance | 16 Ohms |
Maximum load at line output | 20K Ohms |
Maximum load at DI output | 600 Ohms |
Maximum power handling | 120W continuous power 200W peak power |
Dimensions (WxHxD) | 20 x 8.5 x 16cm (7.87 x 3.35 x 6.30") |
Reviews:
13. Engl Cabloader Di Box And Ir Loader Silver
Product Details:
The engl cabloader is a full-featured speaker cabinet simulator, ir loader and di box. this all-in-one solution can transform your pedalboard into a full di rig, provides a perfect link from your amplifier to a recording interface, or even just gives you a great way to hook up your pedals to your headphones for practice. the cabloader sports a whole host of ir-based digital cabinet simulation models, with various microphone and optional power amp emulations. these allow you to digitally recreate the sound and feel of a fully miked guitar speaker and experiment with cab models you may never be able to obtain in real life. third-party ir-loading is supported via the proprietary software so you can load .wav ir files from any of your favorite manufacturers or studios. as complicated as the digital wizardry is, that's going on inside this little box. the cabloader has been designed with sheer simplicity and ease of use in mind. even a complete newcomer to the world of digital cab sims and ir-loaders can quickly set up an amazing sound with its intuitive controls. the quality of the simulations and the extensive connection options make this the perfect tool for anyone from beginners to professionals.
Specifications:
Number of Indicators | 3 |
Indicator Type | LED |
Color | Silver |
Output Jack | XLR |
POwer Output | 9 V |
Reviews:
IR's / DI is something is getting more and more popular and used. For someone "not that young anymore" it could be an hard work if you've zero background/expereience in going direct to PA or if it's the first time you ear about IR. This Engl cabloader is amazing because offer you all of this in a super friendly and easy way, like it is an analog pedal eveyone can use just out of the box, plus the possibility (for more experienced users) to load 3rd party IR to be used alone OR MIXING THEM WITH STOCKS Power amp and mic sim ! And the real magic begins ! Sound quality is comparable to other brands TOP products, but this ENGL (from my point of view) is the winner because sound SO GOOD OUT OF THE BOX WITH STOCKS IR's AND SIMS you probably will never be tempt to load 3d party ir, and since it's designed like a pedal, can be used and it's ready out of the box EVEN FOR PPL WHO ARE NOT ABLE / DONT WANT TO USE A COMPUTER OR AN APP TO MANAGE IT ! <3
Den ENGL Cabloader verwende ich hauptsächlich im Home Studio, er soll später aber auch auf der Bühne zum Einsatz kommen. Die simulierten Cabins von ENGL sind von allerhöchster Qualität und klingen sehr nach dem Original, hier dürfte für jeden Geschmack etwas dabei sein. Und zusätzlich lassen sich auch eigene Impulse Responses laden. Sehr schön auch auch die einfache Anwahl von Presets mittels Fußtaster, so hat man drei mögliche IR's am Start. Ich persönlich finde den ENGL Cabloader besser als die TwoNotes Geräte, auch weil man gleich alle wichtigen Impulse Responses mit dabei hat und nicht erst noch extra kaufen muß. Die Konnektivität ist sehr gut durchdacht, mittels TRHU lässt sich der Cabloader einfach in den FX Loop einschleifen, über den Balanced Out können auch größere Strecken mittels XLR Kabel störungsfrei überwunden werden, das ist alles sehr gut umgesetzt. Auch die Endstufen Simulationen sind mehr als nur brauchbar- Sehr gut gemacht, ENGL. TOP Kaufempfehlung !!!
I recently had a Two Notes CAB M, and was having difficulty finding a good sound – there we simply too many parameters for me, so i started searching and eventually found this, one of the only more straight forward Cab AND Power amp sim duo (besides possibly the Nux Solid Studio). I took the plunge, and despite the hefty price tag, this is SIGNIFICANTLY easier to dial in a great sound. Not only that, you can save two presets to switch between. The options are practical and realistic and the controls are simple but effective. I ended up selling the CAB M/ The only downside is the limited ability to tweak, and possibly the limitations of features such as a Graphic EQ that other items like the Radar or CAB M offer, but for the sound quality, ease of use and practicality, it checks all the boxes for me. I haven't had the chance to use it live yet, but there may be a learning curve to balance my tone for FOH and also to a cabinet onstage for a monitor. I felt compelled to write this, because I could find so few review online. But it really is a great product.Dagget007
14. Little Black Amp Box,jhs
Product Details:
Taming a screaming-loud tube amp doesn't always require bulky and expensive load boxes and attenuators. if your amp has a series effects loop, the jhs pedals little black amp box takes care of the job while being able to fit into the palm of your hand. simply run it through your amp's effects loop and control the amount of signal you send to your amplifier's power section. you'll love the way the little black amp box lets you really push the front end of your amp for the natural feel and tone that you can't get any other way. and your bandmates, sound engineer, parents, neighbors, significant other, and pets will love the way it can keep your volume down to bedroom levels. cranked amp tone at whisper volumeif your amp has a series effects loop, you should stop reading this and go buy a jhs pedals little black amp box. all the roaring amp tones you need come with none of the ear-bleeding levels. convenient low-profile designa device such as the little black amp box is content to be a workhorse piece of gear that quietly does its job in the background. that's why jhs designed this little guy to be compact, sturdy, and simple to integrate into your rig. features:- run it in your effects loop to turn down a turned-up amp – retain the response and tone of your amp's sweet spot at lower levels – high-grade components keep your tone clear and pure – passive design doesn't require any power – small size is ideal for saving pedalboard space or even setting on top of your amp – can easily be mounted underneath your board – built rugged – black powder coating keeps the buffer hidden in the background
Specifications:
Type | Passive Amp Attenuator |
Inputs | 1 x 1/4" instrument input |
Outputs | One 1 x 1/4" instrument output |
Reviews:
I've been looking for this for years and I didn't even know it. Putting this in your effects loop let's you heat up the preamp tubes without shaking the walls. Being in a band with three guitarists, it's really helped my tone cut through the mix, hitting that natural break up by running my hot rod at about 2 o'clock, the sweet spot in my opinion. There's lots of options out there, or you can make a single pot volume box, but I love JHS' stuff and it's inexpensive. Buy it.Chris
Overall: I could have built a passive effects loop attenuator for about $20 less, however, this would be with an unpainted, low-quality enclosure. The box is flawless, the potentiometer is very smooth, etc. Based on how cranked my amp's volume and gain are the first 20% of the pot is the max i can go on full settings. If the volume/gain are at noon for example, the JHS Little Black Amp Box is about as exact ast you can get for volume increase/decrease (1/4 is about 1/4 volume, 1/2 is 1/2, etc all the way up to 100% / 100%). Overall, knowing what I could build for the cost, it was only a few dollars more for a top-quality unit and it's well worth it. The painted enclosure has a very nice feel and finish to it with no "bubbling" like you see on some budget units. This was my first JHS "pedal" but if they put this kind of care into all their pedals I will be seeking a few more from them.
This box is perfect for managing your stage volume on any amp with an effects loop. I use several different guitars during a gig. These guitars do not have the same output, but I manage my volume with the box … it also allows me to make overall volume changes without having to make adjustments to my amp. The manual says not to use with other pedals in the loop; however, I put it at the end of my effects chain and have had no problems at all.Curtis
15. Two Notes Torpedo Live Digital Loadbox And Speaker Simulator
Product Details:
Plug your amp's 8 ohm "hot" speaker output directly into the load box's input, and you've got all the cabs in the world to choose from, to record or to practice in silence. or you can connect your preamp via line input and utilize the loadbox's power amp tube simulation. experiment to get that sound in your head in the torpedo remote software. my favorite setting is a marshall-style 4×12 cab with a ribbon mic. power cable and usb cable included. i'll also throw in a mogami trs to xlr cable for free, for connecting the line out to your audio interface/mixer's input.
Specifications:
Display Type | Digital |
Input Power | 100 W |
Impedance | 8 ohm |
Input Type | MIDI |
Mount Type | Rack |
Reviews:
Quick shipping. Well packed.redstripedguitar
16. Radial Dragster Load Correction
Product Details:
The radial dragster is a super-compact load correction device that lets you adjust the load on your electric guitar pickup to replicate the sound as if connected directly to a tube guitar amp. when a guitar is connected to a guitar amplifier, the pickup and the amp join together to form a circuit. but as soon as you introduce a buffer in between the pickup and the amplifier, the natural relationship is lost. the pickup only 'sees' the buffer and the tone changes. this is the fundamental reason why guitarists hate the sound of wireless systems and non-true-bypass pedals. the dragster solves the problem by restoring the full rich tone you lose when you plug your guitar into a wireless transmitter or other types of buffered inputs such as effects pedals, mixing consoles, sound cards or all-in-one recording systems. the dragster is plug & play easy to use. you simply connect your guitar or bass to the dragster using one of the 1⁄4" inputs and then exit the dragster using the other. set the thumb wheel to the sound you like and you are set to go! the compact design makes it easy to fit on any pedalboard while the built-in mounting flanges make it a breeze to attach to a guitar strap. and its unobtrusive size and light weight won't slow you down. few guitar accessories offer the tremendous 'bang-for-the buck' of a dragster. adjusts the load on magnetic pickup for a natural sound warms up the tone of harsh sounding active buffers helps improve the sound of your wireless system compact and lightweight, can be used anywhere!
Specifications:
Material | Aluminium |
Circuit Type | Passive, true-bypass |
Number of Units | 6 |
Jack Size | 1/4" |
Dimensions | 7.5" L x 3.5" W x 1.4" H |
Reviews:
The Radial Dragster makes passive electric guitar pickups played through digital wireless devices sound more like playing through a cable, reduces the thin, digital harshness of wireless systems. The adjustment wheel allows you to dial in the load to taste. Does not work on active pickups and piezo.limbosine
Overall: I am a guitar player that moves a lot but hates wireless units due to tone loss. I play a Marshall JVM and Les Pauls. Really work on my tone through playing style and equipment. I purchased the tonebone as a last ditch effort before going to a long cable. I am really pleased with how it works. I cannot really tell a difference. I have the perfect AFD tone, now I can take it with me wherever I go! Buy this product, you will be surprised at how well it keeps your tone!Todd
I bought this but it really is more trouble than it's worth. I decieded to go back to using a cable. For me the fact that it has an unmarked thumbwheel that is continuously variable produces so much confusion that I was going crazy trying to find best setting. Then its quite difficult to A/B with another setting because there are no markings. But I tend to like things simple so if you're a tweaker you may dig it.
17. Behringer Ha-10g
Product Details:
The behringer ha-10g 10w guitar combo amp is a compact and portable guitar amplifier that really packs a punch. sporting a custom bugera 6" speaker and revolutionary vtc technology, it's capable of delivering colossal tones well beyond what you'd expect of an amp this size. choose from clean or overdriven channels and use the responsive 3-band eq to fine-tune your sound and finish dialling in your dream tones. perfect for beginner and veteran players alike, the straightforward setup and sheer ease-of-use make this the perfect choice for those that want to plug in and play; the superior sound quality is just a huge bonus!
Specifications:
Power | 10 W |
Speaker configuration | 6" Custom Bugera Speaker |
Switch | Channel select |
Input | 6.3 mm jack |
Line input | 3.5 mm jack |
Headphone output | 3.5 mm jack |
Dimensions (W x H x D) | 298 x 289 x 169 mm |
Channels | 2 |
Reverb | No |
Effects Processor | No |
Recording Output | No |
MIDI Interface | No |
Footswitch connection | No |
Reviews:
Um im Wohnzimmer auf der Couch ein wenig zu klimpern ist dieser Amp geradezu genial . Vom Gewicht her sehr leicht und auch von der Größe ist es ideal den Amp direkt neben sich zu haben . Der Clean-Sound kann richtig laut sein ohne zu zerren . Mit dem Overdrive Regler kann man schon recht schöne Crunch-Sounds erreichen . Ist natürlich nicht vergleichbar mit einem großen Röhrenverstärker , aber das darf man bei einem Preis von unter 50 € auch nicht erwarten . Mit externen Effekt Geräten die man zwischen Gitarre und Amp hängt kann man noch viel mehr Sounds rausholen . Ist alles möglich . Als Übungs-Amp für zu Hause ideal .
It's all right for a beginner but the action needs altering. its far away from neck!Reviewed by Andertons Music Co.
Plenty of volume and nice tones. Seems well built.Reviewed by Andertons Music Co.
18. Two Notes Torpedo Captor X Reactive Loadbox Di And Attenuator – 8 Ohm
Product Details:
Torpedo captor x is a compact reactive load box, tube amp attenuator, miked cab simulator, ir loader and stereo expander for home, live and studio use. play your tube amp at its sweet spot and adjust your volume with the captor x's attenuator. this is perfect for practicing with your true tone without driving the neighbors crazy. you can even enjoy your 100w rig in silence with an immersive headphone experience! tired of lifting your heavy cabinet? ditch it, and go directly into a live mixing console, portable pa, or audio interface. torpedo captor x is also packed with creative bells and whistles that expand its functionality. shape your tone in real time right from your laptop, mobile device, midi controller or the usb torpedo remote. tap into torpedo captor x’s vast collection of virtual cabinets, mic combinations, and rooms for endless creative possibilities. on top of that, the torpedo captor x includes a selection of signal processors to get your guitar tone just right.
Reviews:
Blown away by it. No-one needs actual cabs anymore. Or mics. Tube amp cranked into headphones in the middle of the night? no problem. The cabinet models sound fantastic and there are extra little sound tweaks available like body & thickness that can really lift your tone. It also comes with a plugin that can do the cab emulation in software, with all the benefits that brings – such as not "printing" the sound at the time of recording. Unless you're playing live (and even if you are, tbh), don't buy a cab, just get one of these. It's so good I wanna keep it a secret. Dang too late.Robert G.
All the features stand out! The attenuator feature is nice as you can use this to crank the amp and have bedroom or slightly louder volumes for that cranked amp sound. The stereo headphones is very nice for quiet night time playing. The cabs sims are great with software for PC/MAC and Bluetooth versions for IOS and android. The IR loader is great as you can load your favorite IR into the device. The on board reverb and all the mic, EQ and room adjustments. I have been able to get greats sounds from this device in all aspects, as an attenuator for my amp, and a excellent cab simulator. The 'feel" is great. For the price, nothing else comes close, and if this was more expensive, it still would be better than what's is currently out there. My exceptions were exceeded as all the features were really good, not just one or two.Dave
I’ve never believed in amp sims. They can make do for parts buried in a mix but never stand up on their own. With the Captor X your amp will sound like… your amp. The interface is easy to use and versatile enough to make your amp sound like you want. It’s not like playing your guitar in the room (unless you have a real speaker connected as well). It’s like a recorded playback of your guitar in a room. It reacts properly because it’s your amp reacting. Stock cab sims seem fine but I decided to get some Celestion Greenback IRs since that’s what I use in the world. Happy to say that they sound like Greenbacks. I was worried about unrealistic sound and input lag but no complaints about either. I was worried about using fuzz and distortion pedals but they sound as they should. You can certainly make it sound bad, but you can do that with expensive microphones and boutique amps just the same. I don’t think you can get better without paying more than twice the price. I don’t think it’s better than miking up a real cabinet but I will be recording a lot more guitar without having to hire a studio or traumatise my neighbours. It does take some tweaking but it’s all down to your own preferences and the point is that those tweaks can get you where you want to go. I’d suggest looking up the Andy Demo on YouTube to hear some guitar in isolation. Search for “captor x with fuzz pedal” and you should find a video called “doom pedalboard 2.0…” from Dirty Demos to see what high gain distortion pedals do. These will demonstrate some actual normal playing rather than directionless noodling. If you don’t like the sound then this is not for you, and that’s fine. If you’re trying to record tube amps and you don’t have a nice big space with understanding neighbours then this could be what you’re looking for. It’s definitely what I hoped it would be. And it does bass as well.Guy Incognito
19. Headrush Frfr-108 Powered Guitar Cabinet
Product Details:
Headrush frfr-108 the headrush pedalboard and gigboard have stormed the market with groundbreaking innovation in fx and amp modeling. now that you've elevated your rig to the new innovative standards of today's modelers, don't rely on the limited frequency response of a traditional amplifier or pa speakers. you need the frfr-108. the headrush frfr-108 is a lightweight 2000-watt full-range, flat-response powered cabinet that perfectly complements your headrush pedalboard, gigboard, or any other multi-fx/amp modeler to give you a realistic room-filling sound with the authentic feel of a speaker pushing air.
Specifications:
Peak Power | 2000 W |
Frequency Response | 62 Hz – 20 kHz |
Portable | Yes |
Input Connector Type | XLR, TRS |
Speaker Type | 2-way |
Reviews:
This does the job it's supposed to do. I used it for home practice, and for stage monitoring, with a PodGo, a Helix LT, and my friends Headrush floor unit. I've also used it to monitor when I recorded via the PodGo to a PC. The sound is good across the volume range, including for playing quietly at home levels during the day or evening. I'd still recommend good cans though if you plan to play at 2am and share a wall with a neighbor. It also handled stage monitoring exceptionally, with a live acoustic uncaged drummer, a bass player using a Harte head and 4×10, and a piano player who seems to think that the object of the game is to drive the keys into the floor. Oh… and a sax next to me honking like a flock of geese. No issue hearing myself, and it reproduced the signal with full integrity to the house speakers. A quick tip… do not sit it on a carpeted surface. I did notice that this greatly changes the sound. I have it in a monitor cradle on stage and on an amp stand at home and it works great. Just a heads up. In summation, a great solution for the average player.MadProfMisal
Overall: If only I had known about these the day they came out!. To be fair, I've been attempting to find the Holy Grail …er, perfect marriage between my quality floor modelers loaded with my custom,personal patches to ACCURATELY reproduce what I have programmed into the floor rigs. Big amps,stay home! I have 1×10" cabs,2×12" cabs,4×10" cabs,sealed choices,all kinds of speakers. I am blessed, except they ALL colour my GT-1 hand-tweaked patches/presets in live situations. I can dial 'em in, but need a recovery period from ear frequency overload and load in/outs.Enter the HeadRush FRFR-08 powered cabs,exactly what I wanted and needed.Sheesh, they make all my floor modelers sound like they do when I record via USB,stereo 1'4" cables,and even send a line out to PA or mixer! You can run through guitar amps but you'll get the phasing issue pronto.Look, I have been playing live gigs since 1981,non-stop. I play Gibson,Fenders,PRS,Ibanez big $ rigs,and will not compromise my tone. I'm too old to now, mofos! It's just all the skate slams n such have made lugging gear a real task. These 108's even work for stereo tops and a sub, a studio level wedge monitor,etc.We have recently purchased another set of the 108 and 112's, and that's in the middle of all this C-19. WE have survived by downsizing/adjusting,like everyone else. Thanks zZounds. Quality gear,small footprints,etc for DJ OR our bands gigs(excellent drum monitors,btw) These are perfection. Call zZounds, they know more than me but WOWZA,these make great gtr amps!Please trust the value of these! I take at least one to…everywhere!
Sound: These meet a lot of needs, are tough as Texas women,and sound GREAT. Features: Loved the XLR in's n out,w Line out to board and quality IEC plug/cable Ease of Use: Perfectly tuned nut has options! Quality: Beautiful and functional both! Value: Yes,but I was supposed to get a scratch and dent savings but didn't . THAT SUCKED Manufacturer Support: no The Wow Factor: It fits a niche Overall: We have pair of the 12" and their flat response and quality build have gave our prized floor modeler's a whole nuther' lease in the studio,the road,and @ home. We grabbed a set of the 8" cabs for a BOSS GT-1 stereo rig and they just nail it,every time. HeadRush rule, regarding these flat response cabs at these rates. I'd prefer a $1,500+ powered cab but the FRFR can't be beat until you DO pay that much.Another mind-blowing thing is they work so damn well as a second A/B set of recording studio monitors,it's caused us to reconsider our current set primaries. Kinda hurt but can't complain at the HeadRush vale.Oh, and the work perfect as tops of 10" or 12" sub. 3-wqay PA setups.These are value workhorses that will make your Kemnper Profiler sound as good as ever, your cheap Zoom like studio grade, and compliment our BOSS and Katana gear as good as our High$ PA cabs.ARGGGHHH, wish we would have known all this sooner, but hey, we are finally satisfied,Hombre's.
20. Radial Stagebug Sb-2 Passive Direct Box
Product Details:
The radial stage bug sb-2 passive is a high-performance direct box made for players who are on the move made to fit inside of a guitar case, the sb-2 is ultra-compact yet is feature-packed to ensure great performance on any stage. the compact design begins with a " input and a thru-put to feed the on-stage amp. this connects to the custom-made eclipse et-db3 transformer which performs the impedance matching and balances the signal. when using extra high output instruments, a -15db pad can be inserted into the signal path. this enables the sb-2 to be used with active basses and digital pianos that often tend to overload the input side of the interface. an innovative stereo-to-mono merge function provides a convenient way to connect stereo keyboards and computers without having to reset the source for mono operation, saving time and input channels on the pa. the sb-2 output features an xlr wired to the aes standard with pin-2 hot. once connected, the sb-2 delivers a smooth warm sound reminiscent of older vintage gear. the transformer also helps eliminate the hum and buzz caused by ground loops by isolating the input from the output. this is augmented with a ground lift switch that lifts pin-1 on the xlr for quiet, professional results.
Specifications:
Output Type | XLR |
Transformer Type | ET-DB3 |
Maximum Input | +20 dB |
Input Size | 1/4" |
Frequency Response | 20 Hz to 20 kHz |
Reviews:
As above, very solid construction and does not take up too much room in your case. Crystal clear functionality
I bought this box for instruments at open mic nights. It’s really well built and everything that has gone into it has sounded better than going straight into a desk. The pad and phase reversal switches are useful additions. It’s tiny and fits easily into a guitar case. It will also last. I know you can get active DI boxes a lot cheaper than this but it’s worth spending the extra.
Related posts:
- Little Tikes Electric Guitar For Sale (2024 Update)
- Best Live Guitar Solos (2024 Update)
- Best Desktop Guitar Amp (2024 Update)
- Line 6 Spider V 30 30W 1X8 Guitar Combo Amp For Sale (2024 Update)
- 3 String Bass Guitar For Sale (2024 Update)
- Best Guitar Deals Online (2024 Update)
- Chuck Berry Electric Guitar For Sale (2024 Update)
- Electric Guitar Sets For Beginners For Sale (2024 Update)
- Guitar Amp Isolation Box For Sale (2024 Update)
- Guitar Amp Sim Pedal For Sale (2024 Update)