Are you looking for the Electric Guitar Parts Explained? If so, you’ve come to the right place.
Choosing the Electric Guitar Parts Explained can be difficult as there are so many considerations, such as EMG, WD Music, DiMarzio, Seymour Duncan, Fender, Stewart-MacDonald, Muslady. We have done a lot of research to find the top 20 Electric Guitar Parts Explained available.
The average cost is $25.69. Sold comparable range in price from a low of $4.95 to a high of $79.99.
Based on the research we did, we think Fender 70'S F Style Tuning Machines, Chrome – 6 pack is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Electric Guitar Parts Explained (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
Reviewers Noted:
Attractive . Well made . Durable . Ease of use . Ease of installation
Features:
- Model: 6x left
- Original fender 70s design
- 70s model with f imprint
Reviewers Noted:
Visual appeal . Instruction quality . Craftsmanship
Features:
- For sss stratocasters; blender wiring allows neck/bridge combinations not available conventionally.
- The finest oem component brands, no generic part specs the right parts for your application.
- All hardware included, and it's the right hardware you'll have everything you need.
Reviewers Noted:
Visual appeal . Instruction quality . Craftsmanship
Features:
- The right parts for your applicationall hardware included, and it's the right hardware.
- You'll have everything you needprofessional wiring diagram.
- The highest-quality documentation in the industrynobody knows more about guitar wiring than toneshapers!
Reviewers Noted:
Attractive . Well made . Easy to install . Easy to use . Durability
Features:
- Set of six staggered locking tuning machines (3 long post and 3 short post)
- Gear ratio 18:1
- Dual guide pin mounting
Reviewers Noted:
Attractive . Well made
Features:
- Head size is 18mm width.
- It will fit standard 13/32 inch (10mm) peg holes.
- Full set, nut, ferrule, screws are included.
$69.99
4.7
Reviewers Noted:
Attractive . Well made . Durability
Features:
- Fender american standard strat/tele tuning machines
$79.99
4.0
Features:
- Electric guitar kits for st electric guitar. okoume wood body
- Comes with unpolished okoume body, maple neck &composite ebony fingerboard
- With white pickguard, all parts and all electronic components
$15.79
4.6
Reviewers Noted:
Attractive . Well made . Durability . Ease of installation . Ease of use
Features:
- Volume and tone control knobs.
- Pickup switch tip.
- Tremolo arm tip.
Reviewers Noted:
Visual appeal
Features:
- 6 mounting screw holes
- 4ply red tortoise/white/black/white pvc material,0.09 inch(2.2mm) thickness
- Color: red tortoise; double layers protective films on the top
Reviewers Noted:
Visual appeal . Craftsmanship
Features:
- Vintage style tuners with modern features
- Modern turn ratio
- 2-pin mounting
Reviewers Noted:
Attractive . Durability . Sound quality . Craftsmanship
Features:
- Set of two string guides
- Mounting hardware included
- Finish: chrome
$9.99
5.0
Reviewers Noted:
Visual appeal
Features:
- Weight: .2 pounds.
- Genre: sheet music.
- Electronics condition: new.
$8.99
4.5
Reviewers Noted:
Craftsmanship
Features:
- 1 volume & 2 tones (aged white)
- Universal fit for any split shaft pot
$5.99
4.8
Reviewers Noted:
Craftsmanship
Features:
- Nickel-plated
- Phillips pan head screws (5 x 1 ")
- Used on classic telecaster guitars and basses
$5.99
4.8
Reviewers Noted:
Attractive . Craftsmanship
Features:
- Original fender spare parts
- 5/3 way switch head
- Black version
$33.99
4.5
Reviewers Noted:
Visual appeal
Features:
- Make sure this fits by entering your model number.
- 6 countersunk mounting screw holes,single large string slot.
- Plastic made, 2.0-2.2mm(0.08-0.09 inch) thickness.
$7.97
4.9
Features:
- Description from shopping for a first electric guitar to setting customized action, this do-it-yourself primer for owning and maintaining an electric guitar explains the ins and outs of choosing the…
$12.09
4.5
Reviewers Noted:
Visual appeal
Features:
- Fits fender us/mexico made standard stratocaster modern style.
- If you use it for other strat style guitar, you may need a modification for line up.
- 6 holes, 4ply tortoise shell/white/black/white pvc material, 0.092 inch thickness.
Features:
- You should focus on your work instead of looking for small things that are hard to find.
- All screws and springs were sorted in a separate box, they are in order,10 types,258pcs total.
- The label on the box show where they should be installed, you don't have to take any time to identify these very similar looking guys.
Features:
- Package content: this package comes with 2 screws, 6 nuts and 3 gaskets, no need for other mounting accessory, easy to operate.
- Application: with low noise function, this 5 way switch guitar is suitable for electric guitars.
1. Fender 70's F Style Tuning Machines, Chrome – 6 Pack
Product Details:
Specifications:
| Intended Instrument | Guitar |
| Configuration | 6-Inline |
| Finish | Chrome |
| Gear Ratio | 14:1 |
| Peg Diameter | 0.375" (peg) |
Reviews:
Better than any locking tuner, you just have to measure the string to the second peg above the one you're using, cut it and put it in. When you get to the unwound ones, clip a little shorter (can't tell you how to measure, I figured it out by trial and error. I would estimate 3 wraps by sort of wrapping it loosely, then cut). Perfect match to the vintage F tuners made on the great strats of yore, you can age them to match by fuming the finish with muriatic acid. Place the tuners on an upside down bowl in a piece of tuperware with an inch or so of acid. Seal the lid. Place in a bath of hot water, and the acid will heat and evaporate. After 10 – 15 minutes check the level of chrome removal. You can always do more, but you can't easy put chrome back on. Rinse with cold water when you're done. RAWK ON!!!!ki_jaybones
I love these tuners. They look cool, they hold tune well. I would not upgrade to these for any guitar that doesn't already have them. Use these for repair/replacement only if you have a guitar that comes with these machines (Eric Clapton, 50s reissue strats). American standards, deluxe and mexican strats all use a different mounting method and have a different peg hole size which is why they provide you with those bushings. If you use these to replace the stock Ping tuners you must be able to drill and tap the machine screw mounting holes. The bushings do not set tight in the existing tuning machine peg hole. I used a drop of super glue to hold the bushings in place to the head. I did use these to make a black MN MIM strat look more like Eric's blackie, so it is not impossible to use them, just know you will have to drill new screw holes and tap them for mounting. Be very careful to not drill all the way through the head and with brass mounting screws. There are no extra screws. It is very easy to bur the brass phillip screw heads beyond use. After your holes are drilled use a pick guard screw to thread hole, then use the provided mounting screw for the tuning machine. I drilled and tapped holes to install one machine at a time to more easily manage alignment of machines from one to the other. After I was done it looked factory issue and worked the same. I put a drop of oil between the peg and bushing before stringing to ease peg binding against the bushing.
I build custom Strat/Tele's so this may not apply to all but…. Like others said this peg uses press-fit front bushing style similar to low cost Squire Strat. For standard diecast pegs I drill 10 mm diameter holes on peg head. I use aftermarket necks with 8 mm diameter hole (I remember it is same as low cost Squire). What I do on 8 mm holes for this peg is I drill 4 mm deep 23/64 (9.1 mm??) diameter counterbore holes to accommodate the bushings. I strongly recommend using drill press not hand drill for this. Also for a better support of peg shaft, I made Teflon sleeves to fill the peghead holes of 8 – 10 mm with silicone grease. One minor issue I have is peghead of some aftermarket Tele neck is a little undersized so I need to file the end peg (High E) a bit to fit.Basement Blues
2. Toneshaper Guitar Wiring Kit For Fender Stratocaster Sss1 (Blender Wiring)
Product Details:
Teles allow players to select the neck and bridge pickups together, but stratocasters dont. many players over the years have added switches to stratocasters to allow this combination, and the switch is usually a push/pull pot or a mini-toggle. heres a better idea. but since this control is a variable resistor, rather than merely switch a pickup on or off, it allows the player to blend a pickup into or out of the mix, like a volume control would do. in the full-clockwise position the blender control does absolutely nothing, and in fact makes itself disappear from the circuit so as not to load the circuit (think true bypass). in this position, the 5-way switch functions like a normal strat, with one volume and one tone control. turning the control counter-clockwise in positions 1 and 2 blends in the neck pickup, while turning it in positions 4 and 5 blends in the bridge pickup. the player can get lots of subtle tonal coloration with this control. short-bushing pots, for mounting on a pickguard.
Specifications:
| Package Dimensions | 8.43 x 6.02 x 1.02 inches |
| Is Discontinued By Manufacturer | No |
Reviews:
Easy installation! Good quality. Switch feels good – highly recommendmd_pravinanandraj
I was just thrilled with the quality components and thorough instructions. You cant go wrong.tommy-the-rocker
3. Toneshaper Guitar Wiring Kit For Fender Stratocaster Sss2 Modern
Product Details:
This wiring is called modern because fender began using it in the 1980s as opposed to the 1950s. the original strat had a master volume control a tone control for the neck pickup and a tone control for the middle pickup. there was no tone control for the bridge pickup since it was assumed that a player would preset his two rhythm settings (neck and middle pickups) but the lead setting (bridge pickup) didnt need to be adjustable but would be wide open for maximum treble. remember that during those early years fender never supported a 5-way switch. in later years fender made some changes to the wiring to meet player demands. these included attaching the bridge pickup to the bottom tone control a no-brainer for many players who felt that if any pickup should allow for some treble roll-off it was the bridge pickup. the capacitor value on the tone control was changed to .022f which means that the tone controls provided less extreme tonal shifts than when a heavier cap was used (the earliest strats came with a .1f cap which produced a very substantial tonal shift as the tone controls were adjusted; this value was changed to .047f in the early 1960s).
Specifications:
| Package Dimensions | 8 x 6 x 0.6 inches |
| Is Discontinued By Manufacturer | No |
Reviews:
Easy installation! Good quality. Switch feels good – highly recommendmd_pravinanandraj
I was just thrilled with the quality components and thorough instructions. You cant go wrong.tommy-the-rocker
4. Fender Deluxe Locking Machine Heads
Product Details:
Brand new in package fender locking tuners part#0990818100 these will fit right on any newer american or mexican standard strat or tele without any mods at all. help you guitar stay in tune and replace your old crappy tuners with these locking gears. dimension: 4.5-inch x 1.7-inch x 10-inch.
Specifications:
Reviews:
I first discovered these when purchasing a Fender American Deluxe Strat. Fender only puts them on the American Deluxe Strats and Teles, so far as I know. Since then, I have purchased these and put them on three other of My Fender Teles and Strats. These are a perfect way to upgrade, if your Fender neck has the two-pin guide holes, like most of their modern necks (vintage style excluded). These really are the smoothest Fender machine heads/tuners I've ever found. The lower priced two pin tuners as used on the Player series just aren't as smooth and it seems like the gear ratio is different, too. maybe lower than the Player machine heads, like 18:1. Yes..more expensive, but even without the locking device, well worth it, IMO. The pic is a Tele I recently built with V-Mod pups and 12' radius fret board. I just installed the tuners the other day. The guitar deserved these and I love 'em!songs60s
Have had these new Fender locking tuners on my Stratocaster for a few weeks now, and I must say that I really like them! I think one of the big benefits of locking tuners on a Fender with a whammy bar is that there are no wraps of the string on the tuning pegs, the wraps dont always go back the same way after returning from a dive. Also the new tuners seem to have a little more weight to them than the original tuners. The added weight and mass seem to make the tone of the guitar a little more solid with possibly a bit more sustain. I definitely noticed a big improvement with tuning stability after the first time of doing some dives on the guitar. The feel of the tuners while actually tuning the guitar is very nice too, very smooth and precise. I would not hesitate to buy these tuners again to put on my other Fenders.stratm_88
I bought these for my American Performer Strat. I had no issues with tuning. The vintage tuners that came with it stayed in tune just fine. Had problems with strings slipping while changing them and it was very frustrating. At first I was concerned because they came with no installation instructions and I am not good mechanically at all. Found instructions on how to install them onto the guitar and how to install strings by looking on the internet. So,so easy! All you need is a pair of pliers. Loosen the nut, remove the old tuner and put the new one on. If you are installing on a Fender Strat the holes line up with the two pegs on the locking tuner and they pop right in and you tighten the nut. That simple. To install the string you just pull the string through the peg as tight as you can by hand, tighten the bottom knob which locks the string and cut the string and tune. So, so simple and efficient. I have no problem installing new strings any more! Quick and easy. Everyone should have these. Well worth the money by far!Morningdew
5. Musiclily 6-In-Line Sealed Electric Guitar String Tuning Pegs Keys Machine Head Tuners Set Right Hand For Fender Strat Stratocaster
Product Details:
Specifications:
| Package Dimensions | 6.81 x 4.96 x 1.02 inches |
| Is Discontinued By Manufacturer | No |
| Color Name | Small Button Black |
| Number of Strings | 6 |
Reviews:
These worked better than the ones that came on my Squire guitar. If these are not working for you, one thing you can try is changing out the plastic nut for bone and/or making sure the strings are not bound by the nut. Use one of those cheap pocket string files (ones that have files that fold out).onefunstore
Very poor quality. Would not stay in tune for five minutes. Replaced with a set of Groovers. Do yourself a favor just get the groovers or hip shot first save yourself the aggravation of having to change them twice. I originally got them because I needed to replace tuners, the price was very attractive. The finish is very good, alas the quality of the internals was lacking.airdogone
6. Fender American Standard Stratocaster /telecaster Tuning Machines Chrome
Product Details:
Fender machine heads right handed description set of six tuners designed to fit most modern-style fender electric guitars with dual-pin mounting configuration. tall post tuners are used for low e and a strings and shorter post tuners used for d, g, b and high e strings. staggered tuners increase the break angle over the nut and improve tuning stability. available in chrome and gold plated. mounting hardware included. genuine fender american series chrome tuning keys. features staggered height tuning posts, 2 tall post, 4 short post, eliminating the need for a second string tree. standard two-post mounting. includes screw-in bushings and washers. requires 10mm holes in headstock.
Specifications:
| Intended Instrument | Electric Guitar |
| Configuration | 6-Inline, Staggered |
| Finish | Chrome |
| Gear Ratio | 14:1 |
Reviews:
Tuners are solid and work — not locking type, but stays in tune. Installation takes either a neck with the two little guide-holes all ready to go, or else some skill with a small drill bit. Put it into place and tighten down enough to leave two faint dents on the headstock, then remove and drill. Tape a stop guide so you don't drill too far through the neck, just deep enough for the wee pegs.zippinski
The only downside to these tuners is that they require two holes to be drilled in the back of the headstock alongside the 10mm hole to locate two pins extending from each tuner that prevent it twisting around under string tension. If your headstock is pre-drilled, no problem, but if it isn't you will have to do this yourself. I used a Dremel with a dentists' drill and a steady hand. Other than this they look great, very tidy and most importantly work well. They hold tune perfectly. Recommended.johthoma270
These are the tuners that came stock on my E4 Fender American Standard. They have a smooth feel, and stay in tune well. The tuners have worked reliably since I bought the guitar in 1985. I also have several other guitars with these tuners, and they all function perfectly. I think that the tuners improve the sound by making sure that the strings stay in tune. Also, these tuners make good contact with the neck, and don't vibrate like some marginally acceptable Chinese tuners, found on some Squiers (and other budget guitars), thereby better transferring vibration to and from the neck and strings. Just my two cents.Bill
7. Diy Electric Guitar Kits For St Electric Guitar, Okoume Body
Product Details:
Specifications:
| Package Dimensions | 30 x 19 x 3 inches |
| Is Discontinued By Manufacturer | No |
| Back Material | okoume wood |
| Color Name | Brown, White, Black |
| Fretboard Material | composite ebony fingerboard |
| Top Material | Wood |
| Neck Material Type | Maple |
| Number of Strings | 6 |
| Guitar Bridge System | Adjustable |
| Fretboard Material Type | composite ebony fingerboard |
| Hand Orientation | Right |
Reviews:
Best kit of the 4 guitars I've built. Everything fit nice and tight. All the components fit well and are of quality. The pickups are hot. Everything plugs together, no soldering. This guitar has a bolt on neck. Gibsons factory guitars are glued in place. The bolt on fit nice and tight and was well finished. The instructions are clear. Best kit. Fun.David Guzman
Easy build few minor tweeks during setup and it was ready to go! Totally satisfiedEric Nichols
8. Fender Stratocaster Accessory Kit (White)
Product Details:
Volume and tone knobs tremolo arm tip & switch tip vintage-style tremolo back plate pickup covers pickup covers will not fit scn, n3 or noiseless pickups want to change the look of your stratocaster without spending a lot of money on a paint job? try sprucing it up with a stratocaster accessory kit. everything you need to personalize your stratocaster. includes volume and tone knobs, tremolo arm tip, switch tip, vintage-style tremolo backplate and pickup covers. pickup covers will not fit scn, n3 or noiseless pickups.
Specifications:
| Instrument Color | White |
| Instrument Brand | Fender |
| Style | Stratocaster |
Reviews:
I upgraded my pickups in MIM strat and wanted to go black from the existing white. I lost a humbucker for a single coil in the process and needed a new pickguard. My strat was the midnight wine color (dark) and the black looks absolutely awesome on it compared to the white. Everything fit perfect. No mis aligned screws etc as often occurs when changing out parts on some MIM strats. The strat is year model 2006. The only complaint and it is notable band the reason the rating is a bit lower: I understand black loves scratches but come on, the instant I wiped the pick guard with a very soft cloth, massive scratches. It is brand new and very scratched. Even micro fiber cloth marks it. I know it will get scratched but I wanted the shine at least until playing it caused scratches. I would prefer to pay a little more and Fender make the plastic more scratch resistant. That can be done very easily in the polymers/chemistry chosen. Other than the scratching gripe, typical good quality OEM Fender, looks sharp, fits good. Change your color and personalize your strat easily. I am glad I did.
I love the aged look of the pickup covers and knobs. I have ordered many over the years. The tremolo cover does not match at all and usually has a mint green color. That part of the kit is a waste. I have piles of them which I cannot use. The best look for your Strat is a W/B/W pickguard with matching tremolo cover and these pickup covers and knobs. I will continue to buy the kit. I have tried several others and they are always lacking.lawellness
9. Musiclily 4ply Strat Tremolo Cavity Cover Backplate For Fender Stratocaster Electric Guitar,red Tortoise
Product Details:
Specifications:
| Product Dimensions | 0.2 x 5.91 x 3.54 inches |
| Is Discontinued By Manufacturer | No |
| Color Name | Red Tortoise |
Reviews:
Measure first. Holes do not line up for most modelsi82lose4me
Didnt fit perfect but still usable.jotre_7202
Fits my guitar, looks good and came with screws. Price can't be beat! And shipping was fast!ablickle
10. Fender Classicgear Tuning Machines – Chrome
Product Details:
Customise your instrument with top quality parts. the fender classicgear tuning machines stabilise your instrument's tuning. when you're on stage, tuning up on stage can be annoying and inconvenient. with these classic fender tuning machines, they help hold your tuning in place – so you can focus on the music.as well as being highly practical, they also contribute a vintage aesthetic to your instrument. if you want that classic fender look, you've found it. simply install these to your headstock and see the difference. a small change goes a long way!
Specifications:
| Intended Instrument | Guitar |
| Configuration | 6-Inline |
| Finish | Chrome |
| Gear Ratio | 18:1 |
Reviews:
I was hoping to use these tuners to upgrade a new Fender Squier Bullet Telecaster neck that has a two-pin mounting system. Problem is, the two pin footprint is different, so new pin-holes would need to be drilled. I will have to find another use for the tuners.circle-of-least-confusion
These are good tuners if you are looking for the vintage aesthetic and slotted shaft for easy stringing. They also have a modern, desirable tuning gear ration of 18:1 which is not found on most aftermarket vintage style tuners, based on my research. Take note that these tuners fit modern 25/64 in. (10mm) tuner shaft holes found on standard necks, not vintage reissues (which have 8.5mm holes). They are drop-in replacements (no drilling required) only for the standard Fender sealed tuners or Fender locking tuners on necks with the two locator pins per tuner. I used these for a modern replacement neck and therefore needed to drill the two locator pin holes for each tuner which I found quite challenging to do without a drill press or jig. They were difficult to install straight, and I found myself redrilling pin holes using larger bits for some of the tuners to get them more in line with the others – very frustrating. So unless you have the correct tools or already have pin holes in your neck, it may be worth getting other vintage tuners with or without conversion bushings, depending on the tuner shaft hole size of your neck. I would give them 4-5 stars if you are fortunate enough to be able to drop these into your Fender-made neck. Also, these are branded with a "P" indicating that they are likely manufactured by Ping, and the Fender packaging indicates they are made in Taiwan.Nick
If youre after the vintage look and the functionality of split shaft tuners but dont want to modify your Fenders headstock (assuming you have the standard, two pin tuners), then these are your jam. Easier to restring with these than the standard tuners and not much more difficult than Fenders locking tuners. The quality and price are good and they take only a few minutes to drop in.der_kruscher
11. Fender Stratocaster String Guides Vintage Style
Product Details:
Specifications:
| Product Dimensions | 0.2 x 5.6 x 0.2 inches |
| Country of Origin | USA |
| Is Discontinued By Manufacturer | No |
| Color Name | Chrome |
Reviews:
Was looking for string guides in the guitar parts and accessories area and asked the salesperson if they had any? He happily came over and found a package for me. I think it was the only package of the style that I wanted. Very pleased with my shopping experience. I have been to other stores where the sales people don't even know what they have. Thanks for caring Sam Ash !ANDRIS
The only thing puzzleine me is why is it more money for the vintage tree with onw metal spacer and one nylon spacer and on tree, than the pack which I bough that has two trees and two metal spacers? i also thought that the screws provided are longer than what i remember my 56 strat or even the screws from the 60's were. made it harder to instal. I drilled it with a 1/16 drill but one be careful not to go to deep but you have to go deep enough of you can't screw it in tight. otherwise it works just fine.Mike
Excellent product. I immediately fitted them onto my 1978 strat. Plays great.stb.uk.ftw1ve
12. Mel Bay Electric Guitar Anatomy And Mechanics Wall Chart
Product Details:
Electric guitar anatomy and mechanics wall chart" is a stunning visual guide to the electric guitar and all its features. detailed diagrams and analyses provide a window into the underlying physics of the instrument and its parts. this "blueprint" provides more than a working knowledge of the electric guitar and reveals the hidden beauty of this popular instrument. designed for anyone interested in the electric guitar.
Specifications:
| Compatible With | Multi-Instrument |
Reviews:
Made my home studio look and feel more Studio.Josh
13. Mojotone Strat Guitar Knobs White
Product Details:
Specifications:
| Style | Aged White |
Reviews:
knobs for stratocastersna
I bought these pots for a Jaguar guitar build I am doing – using 2 volumes and 1 tone in my set up for versatility on the instrument. In order to get a fully matching set for my axe in the making, I had to buy 2 sets, since Strats are set up with the opposite – 2 tones, 1 volume – meaning I had to buy 6 knobs to use 3. Not good. I chose Mojotone because I was using CTS pots in my build and these pots usually have the larger shafts with 24 splines, not 18 splines like the smaller, metric shafts. When they arrived, I was jazzed, that is until I went to put them on the pot shafts. These Mojotones were made for the small shafts and would not fit. I was not a happy guy, needless to say. My own bad experience aside, they are well made, easy to read, and a good choice for your Strat provided they have the smaller, metric pot shafts. I guess my next build will be a Les Paul with speed knobs. At least I KNOW they will fit on CTS pots. I would recommend Mojotone pots and knobs to anyone, but first make sure you know your shaft size on your pots. Even though I had a bad fit up, the overall quality of the knobs is good. That is why they had 4 stars, not 5.RD76
14. Fender Vintage-Style Bass Telecaster Bridge Strap Button Mounting Screws For Electric Guitar Nickel
Product Details:
Some of our most requested replacement screws. made for fender and used on a variety of vintage and contemporary models. package contains twelve nickel, oval head, phillips, (5 x 1") screws used to mount vintage fender telecaster and bass bridges. also used for strap button mounting.some of our most requested replacement screws. made for fender and used on a variety of vintage and contemporary models. package contains twelve nickel, oval head, phillips, (5 x 1") screws used to mount vintage fender telecaster and bass bridges. also used for strap button mounting.
Specifications:
| Oval-head Size | 5×1" |
| Compatibility | Vintage Telecaster and Bass Guitars |
| Package Quantity | 12 Pieces |
Reviews:
Being screws there is not much to say!
They do exactly what you need them to dohague-2008
15. Fender Stratocaster Switch Tips, Black (2)
Product Details:
Black pickguard and parts are classic. maybe your own axe needs a replacement? or maybe you just want to customize your guitar and add a splash of black to the pickup selector switch. whatever you justification may be, fender has again made it easy for you. set of two. original strat black switch tips from fender come in packs of 2 and will keep your axe's hardware looking stock.
Specifications:
| Product Dimensions | 11.42 x 7.48 x 3.54 inches |
| Country of Origin | USA |
| Color Name | Black |
Reviews:
Wanted to replace the plastic switch tip on my Gretsch. The import Gretsch has a metric thread switch which does not fit with many of the tips available. This fit perfectly. Could not be more happy with the purchase. Nice little, inexpensive upgrade to the look of my guitar. I've included some pictures; one on a Torino Green G2622T and one on a Golddust G2420T.tonwed
I ordered these tips for an import Strat copy, (actually it's for an aftermarket switch anyways) and they didn't fit, they were much too big and didn't fit snugly at all. So, I figured, fine, my fault. However, I tried the tips on a stock Squier switch, and they didn't come close to fitting that one either! Maybe it's only American Strats that these fit? I find that a little difficult to believe, but maybe it's the case. I don't recommend these for imports!DeanVegas
Well, it's a switch tip, not much to say… although I will state this: it's original Fender so the quality is decent and more importantly, it will fit the wider blade on the switch common to Fender original switches (maybe others too). The slot on cheaper import switch tips are too narrow.danb435
16. Musiclily Strat Back Plate Tremolo Cavity Cover Backplate For Fender Us Mexico Made Standard Stratocaster Modern Style Electric Guitar 4ply Pearl Grey
Product Details:
Make sure this fits by entering your model number. fits fender usa/mexican made standard stratocaster modern style guitar you use it for other strat style guitar, you may need a modification for line up 6 countersunk mounting screw holes,single large string slot plastic made, 2.0-2.2mm(0.08-0.09 inch) thickness double layers protective films on the top package included: 1 pc guitar pickguard
Reviews:
Measure first. Holes do not line up for most modelsi82lose4me
Didnt fit perfect but still usable.jotre_7202
Fits my guitar, looks good and came with screws. Price can't be beat! And shipping was fast!ablickle
17. How To Make Your Electric Guitar Play Great – 13081000
Product Details:
Description from shopping for a first electric guitar to setting customized action, this do-it-yourself primer for owning and maintaining an electric guitar explains the ins and outs of choosing the right guitar; cleaning, tools, and basic maintenance; personalizing and improving on a “factory setup;” troubleshooting; basic guitar electronics; choosing and installing replacement pickups, pots, switches, and capacitors; setups of the pros; and much more. this new edition is overhauled from top to bottom and re-organized to make it easy for the reader to make his electric guitar sound and play great. this edition also covers bass guitars. audio/page samples (if available) catalog: 13081000 publisher: backbeat books composer: erlewine, dan artist: arranger: more info: 2nd edition voicing: text w/dvd level: pages: 138 table of contents:
Specifications:
| Composer | Erlewine, Dan |
| Voicing | Text w/DVD |
Reviews:
excellent book for owners and do it yourselfersdinklefuss3
I have heard about Dan Erlewine from a friend in 1994, to me he is the best in his area, very simple and understandable and with a full TRUCK of secrets which he likes to share with all of us. I am familiar with his writing and explaining, a lot of photos and setups, reviews and charts. I can say that everyone can benefit from this book, beginner or proffesional. If there where more stars to rate I will give 10!!! Thanks a lot. (I have allready recommend it to a friend) Tedtedkaltsas88
Everything that you ever needed to know about setting up your guitar. Dan Erlewine covers it all! I learned tons and have saved a bunch of money by doing it myself. I even learned how to inspect a guitar before buying one. A must read for every guitarist! Well worth the time and money!lemaym
18. Musiclily 4ply Strat Tremolo Cavity Cover Backplate For Stratocaster Electric Guitardark Brown Tortoise
Product Details:
Reviews:
Measure first. Holes do not line up for most modelsi82lose4me
Didnt fit perfect but still usable.jotre_7202
Fits my guitar, looks good and came with screws. Price can't be beat! And shipping was fast!ablickle
19. Vencetmat Guitar Screws Kit, Guitar Hardware Luthier Parts-Kit For Tele/strat/sq,switch,tuner,machine Head, Neck Plate,pickguard,guitar Strap End
Product Details:
You should focus on your work instead of looking for small things that are hard to find. all screws and springs were sorted in a separate box, they are in order,10 types,258pcs total. the label on the box show where they should be installed, you don't have to take any time to identify these very similar looking guys. they are precisely machined on a machine tool to fit your guitar perfectly. whether guitar repairing or diy, this kit will greatly improve efficiency, to all guitarists and luthiers. strong what is important about guitar screw? /strong br strong my answer is: sturdy,precise and beautiful. /strong br yes, all of our screws made from high-quality carbon steel, they are sturdy. br processed by high-precision machine tool, they are precise. br excellent electroplating process, they are beautiful and rust-prevent. br the label on the box show where they should be installed, skip the process of identifying these similar guys. br br strong the 10 types(258pcs total) as follow: /strong br 1. for selector switch(50pcs). br 2. for machine head mounting(50pcs). br 3. for neck plate(12pcs). br 4. for guitar pickguard(50pcs). br 5. for strap end pins(4pcs, flat & mushroom per 2). br 6. for humbucker pickup(24pcs, screws & spring per 12). br 7. for tele bridge(12pcs). br 8. for tele/strat pickup(24pcs,screws & spring per 12). br 9. for pickup ring(20pcs). br 10.
Specifications:
| Product Dimensions | 6.77 x 3.86 x 0.87 inches |
| Color Name | Black |
20. Getmusic Guitar Wiring Harness Set Prewired 500k Big Pots 5 Way Switch Wiring
Product Details:
Easy install: this wiring harness is completely prewired. what you need to do is solder your guitar pickups to the switch and ground them to the volume pot. it is very easy to install. premium material: made of high quality metal and electron components, this guitar wiring harness set has excellent workmanship and good texture, it is durable and convenient to use. package content: this package comes with 2 screws, 6 nuts and 3 gaskets, no need for other mounting accessory, easy to operate. application: with low noise function, this 5 way switch guitar is suitable for electric guitars.
Specifications:
| Package Dimensions | 3.9 x 3.7 x 1.5 inches |
| Is Discontinued By Manufacturer | No |
Related posts:
- Guitar Amp Tubes Guide For Sale (2024 Update)
- Guitar Neck Shape Guide For Sale (2024 Update)
- Electric Guitar Kits Ebay For Sale (2024 Update)
- Electric Guitar Pickup On Acoustic For Sale (2024 Update)
- Bass Guitar Pick Ups For Sale (2023 Update)
- Guitar Combo Amp Speaker Cable For Sale (2024 Update)
- Guitar Neck Pocket Dimensions For Sale (2024 Update)
- Guitar String Gauges Acoustic For Sale (2024 Update)
- Fender Guitar Parts Diagram For Sale (2024 Update)
- Electric Guitar Parts Kit For Sale (2024 Update)
