Are you looking for the Different Parts Of An Electric Guitar? If so, you’ve come to the right place.
Choosing the Different Parts Of An Electric Guitar can be difficult as there are so many considerations, such as EMG, WD Music, Fishman, Fender, Stewart-MacDonald, Gotoh, Hondo, Solo Guitar, Muslady. We have done a lot of research to find the top 20 Different Parts Of An Electric Guitar available.
The average cost is $53.15. Sold comparable range in price from a low of $6.89 to a high of $169.99.
Based on the research we did, we think ToneShaper Guitar Wiring Kit for Fender Stratocaster Sss2 Modern is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Different Parts Of An Electric Guitar (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reviewers Noted:
Visual appeal . Instruction quality . Craftsmanship
Features:
- The right parts for your applicationall hardware included, and it's the right hardware.
- You'll have everything you needprofessional wiring diagram.
- The highest-quality documentation in the industrynobody knows more about guitar wiring than toneshapers!
Reviewers Noted:
Attractive . Well made . Durable . Ease of use . Ease of installation
Features:
- Model: 6x left
- Original fender 70s design
- 70s model with f imprint
Reviewers Noted:
Visual appeal
Features:
- Fits electric guitar
- Material: metal alloy; the width:10.5mm
- Size: 20*10.5*5.5mm
Reviewers Noted:
Attractive . Well made . Easy to install . Easy to use . Durability
Features:
- Set of six staggered locking tuning machines (3 long post and 3 short post)
- Gear ratio 18:1
- Dual guide pin mounting
Reviewers Noted:
Well made . Attractive
Features:
- Same pickguards as used on actual production models.
- Double check your screw-hole pattern to ensure you chose the right model.
- Constructed of premium celluloid material.
Reviewers Noted:
Good sound quality . Craftsmanship
Features:
- Single coils
- Anico 3 magnets
- Medium pickup reverse-wound / reverse-polarity
$141.86
5.0
Reviewers Noted:
Sound quality
Features:
- Set of two single-coil jazz bass pickups
- High-output, vintage-informed tone
- Alnico 2/5 unbeveled magnets
Reviewers Noted:
Well made . Sound quality . Visual appeal . Durability
Features:
- Two heavy-duty pivot screws let you do vibrato work, with solid steel saddles for pure fender tone and sustain
- Set of six powder-coated steel block saddles with off-center intonation screws, and screw-in style tremolo arm
- Includes mounting hardware, adjustment wrenches and tremolo arm with white tip
Reviewers Noted:
Craftsmanship
Features:
- Two-pivot synchronized bridge assembly with polished steel block-style saddles, offset intonation screws, steel tremolo block, and pop-in tremolo arm
- Modern-style narrow spacing
- Assembly includes tremolo claw, tremolo/tremolo arm springs, mounting hardware, and tremolo arm
$79.99
4.0
Features:
- Electric guitar kits for st electric guitar. okoume wood body
- Comes with unpolished okoume body, maple neck &composite ebony fingerboard
- With white pickguard, all parts and all electronic components
Reviewers Noted:
Good sound quality . Attractive . Craftsmanship . Ease of installation . Durability
Features:
- Formvar magnet wire for bright, glassy tone
- Staggered hand-beveled pole pieces for balanced output
- Alnico 5 magnets for more focus and dynamics
Reviewers Noted:
Well made . Sound quality . Ease of use . Durability . Ease of installation
Features:
- For tremolo
- For original american standard
- Set with 12 pieces
$14.99
4.8
Reviewers Noted:
Attractive . Well made
Features:
- Set of three soft touch push-on control knobs
- Designed to fit 6.35mm (1/4″) split-shaft potentiometers
- For most u.s.- and mexico-made stratocaster models (1954-present)
$24.99
4.8
Reviewers Noted:
Attractive . Well made . Good sound quality . Durable . Ease of use
Features:
- Colour: chrome
- Made in: taiwan
- Handedness: left handed
$7.99
4.8
Reviewers Noted:
Attractive . Well made
Features:
- For original stratocaster
- 1x volume control
- 2x tone control
$15.79
4.6
Reviewers Noted:
Attractive . Well made . Durability . Ease of installation . Ease of use
Features:
- Volume and tone control knobs.
- Pickup switch tip.
- Tremolo arm tip.
$15.78
4.5
Reviewers Noted:
Attractive . Well made
Features:
- Color: black.
- Head size is 21mm width.
- It will fit standard 13/32 inch (10mm) peg holes.
$89.99
4.7
Reviewers Noted:
Attractive . Easy to install . Craftsmanship
Features:
- Compatible with most guitars for wide-ranging use.
- Metal buttonsallow simple operation.
- Nickel finishprovides a stylish look.
$18.19
4.7
Reviewers Noted:
Visual appeal
Features:
- Includes eggshell-colored tone and volume knobs, pickup covers, tremolo arm tip and switch tip (backplate sold separately).
- Introduced on early '50s stratocaster guitars.
- Fits most vintage and modern stratocaster guitars.
$44.99
4.8
Reviewers Noted:
Attractive
Features:
- New set of genuine fender gold vintage style 6 inline tuners for
- Stratocaster or telecaster.slotted end with string insert.gold mounting
- Screws and knurled press-fit peghead bushings for 11/32" (8.5mm)
1. Toneshaper Guitar Wiring Kit For Fender Stratocaster Sss2 Modern
Product Details:
This wiring is called modern because fender began using it in the 1980s as opposed to the 1950s. the original strat had a master volume control a tone control for the neck pickup and a tone control for the middle pickup. there was no tone control for the bridge pickup since it was assumed that a player would preset his two rhythm settings (neck and middle pickups) but the lead setting (bridge pickup) didnt need to be adjustable but would be wide open for maximum treble. remember that during those early years fender never supported a 5-way switch. in later years fender made some changes to the wiring to meet player demands. these included attaching the bridge pickup to the bottom tone control a no-brainer for many players who felt that if any pickup should allow for some treble roll-off it was the bridge pickup. the capacitor value on the tone control was changed to .022f which means that the tone controls provided less extreme tonal shifts than when a heavier cap was used (the earliest strats came with a .1f cap which produced a very substantial tonal shift as the tone controls were adjusted; this value was changed to .047f in the early 1960s).
Specifications:
| Package Dimensions | 8 x 6 x 0.6 inches |
| Is Discontinued By Manufacturer | No |
Reviews:
Easy installation! Good quality. Switch feels good – highly recommendmd_pravinanandraj
I was just thrilled with the quality components and thorough instructions. You cant go wrong.tommy-the-rocker
2. Fender 70's F Style Tuning Machines, Chrome – 6 Pack
Product Details:
Specifications:
| Intended Instrument | Guitar |
| Configuration | 6-Inline |
| Finish | Chrome |
| Gear Ratio | 14:1 |
| Peg Diameter | 0.375" (peg) |
Reviews:
Better than any locking tuner, you just have to measure the string to the second peg above the one you're using, cut it and put it in. When you get to the unwound ones, clip a little shorter (can't tell you how to measure, I figured it out by trial and error. I would estimate 3 wraps by sort of wrapping it loosely, then cut). Perfect match to the vintage F tuners made on the great strats of yore, you can age them to match by fuming the finish with muriatic acid. Place the tuners on an upside down bowl in a piece of tuperware with an inch or so of acid. Seal the lid. Place in a bath of hot water, and the acid will heat and evaporate. After 10 – 15 minutes check the level of chrome removal. You can always do more, but you can't easy put chrome back on. Rinse with cold water when you're done. RAWK ON!!!!ki_jaybones
I love these tuners. They look cool, they hold tune well. I would not upgrade to these for any guitar that doesn't already have them. Use these for repair/replacement only if you have a guitar that comes with these machines (Eric Clapton, 50s reissue strats). American standards, deluxe and mexican strats all use a different mounting method and have a different peg hole size which is why they provide you with those bushings. If you use these to replace the stock Ping tuners you must be able to drill and tap the machine screw mounting holes. The bushings do not set tight in the existing tuning machine peg hole. I used a drop of super glue to hold the bushings in place to the head. I did use these to make a black MN MIM strat look more like Eric's blackie, so it is not impossible to use them, just know you will have to drill new screw holes and tap them for mounting. Be very careful to not drill all the way through the head and with brass mounting screws. There are no extra screws. It is very easy to bur the brass phillip screw heads beyond use. After your holes are drilled use a pick guard screw to thread hole, then use the provided mounting screw for the tuning machine. I drilled and tapped holes to install one machine at a time to more easily manage alignment of machines from one to the other. After I was done it looked factory issue and worked the same. I put a drop of oil between the peg and bushing before stringing to ease peg binding against the bushing.
I build custom Strat/Tele's so this may not apply to all but…. Like others said this peg uses press-fit front bushing style similar to low cost Squire Strat. For standard diecast pegs I drill 10 mm diameter holes on peg head. I use aftermarket necks with 8 mm diameter hole (I remember it is same as low cost Squire). What I do on 8 mm holes for this peg is I drill 4 mm deep 23/64 (9.1 mm??) diameter counterbore holes to accommodate the bushings. I strongly recommend using drill press not hand drill for this. Also for a better support of peg shaft, I made Teflon sleeves to fill the peghead holes of 8 – 10 mm with silicone grease. One minor issue I have is peghead of some aftermarket Tele neck is a little undersized so I need to file the end peg (High E) a bit to fit.Basement Blues
3. Musiclily 10.5mm Guitar Tremolo Bridge Saddles For Fender Stratocaster Strat Telecaster Tele Electric Guitar Replacement Chrome(Set Of 6)
Product Details:
Specifications:
| Package Dimensions | 5.79 x 4.02 x 0.47 inches |
| Is Discontinued By Manufacturer | No |
| Color Name | Chrome |
| Number of Strings | 6 |
Reviews:
Best sound upgrade if fitting your needs it'll improve the quality whatsoever.jd123a
They work as advertised and they look great against the chrome bridge.fzrdad
fast delivery fortunately one of six saddles missing small screws easy to miss I would use this vendor againbumble-monkey
4. Fender Deluxe Locking Machine Heads
Product Details:
Brand new in package fender locking tuners part#0990818100 these will fit right on any newer american or mexican standard strat or tele without any mods at all. help you guitar stay in tune and replace your old crappy tuners with these locking gears. dimension: 4.5-inch x 1.7-inch x 10-inch.
Specifications:
Reviews:
I first discovered these when purchasing a Fender American Deluxe Strat. Fender only puts them on the American Deluxe Strats and Teles, so far as I know. Since then, I have purchased these and put them on three other of My Fender Teles and Strats. These are a perfect way to upgrade, if your Fender neck has the two-pin guide holes, like most of their modern necks (vintage style excluded). These really are the smoothest Fender machine heads/tuners I've ever found. The lower priced two pin tuners as used on the Player series just aren't as smooth and it seems like the gear ratio is different, too. maybe lower than the Player machine heads, like 18:1. Yes..more expensive, but even without the locking device, well worth it, IMO. The pic is a Tele I recently built with V-Mod pups and 12' radius fret board. I just installed the tuners the other day. The guitar deserved these and I love 'em!songs60s
Have had these new Fender locking tuners on my Stratocaster for a few weeks now, and I must say that I really like them! I think one of the big benefits of locking tuners on a Fender with a whammy bar is that there are no wraps of the string on the tuning pegs, the wraps dont always go back the same way after returning from a dive. Also the new tuners seem to have a little more weight to them than the original tuners. The added weight and mass seem to make the tone of the guitar a little more solid with possibly a bit more sustain. I definitely noticed a big improvement with tuning stability after the first time of doing some dives on the guitar. The feel of the tuners while actually tuning the guitar is very nice too, very smooth and precise. I would not hesitate to buy these tuners again to put on my other Fenders.stratm_88
I bought these for my American Performer Strat. I had no issues with tuning. The vintage tuners that came with it stayed in tune just fine. Had problems with strings slipping while changing them and it was very frustrating. At first I was concerned because they came with no installation instructions and I am not good mechanically at all. Found instructions on how to install them onto the guitar and how to install strings by looking on the internet. So,so easy! All you need is a pair of pliers. Loosen the nut, remove the old tuner and put the new one on. If you are installing on a Fender Strat the holes line up with the two pegs on the locking tuner and they pop right in and you tighten the nut. That simple. To install the string you just pull the string through the peg as tight as you can by hand, tighten the bottom knob which locks the string and cut the string and tune. So, so simple and efficient. I have no problem installing new strings any more! Quick and easy. Everyone should have these. Well worth the money by far!Morningdew
5. Fender Modern Backplate Stratocaster – Black 3-Ply
Product Details:
Specifications:
| Product Dimensions | 11.42 x 7.48 x 3.54 inches |
| Country of Origin | USA |
| Is Discontinued By Manufacturer | No |
| Color Name | Black |
Reviews:
This is the most Fenderest Stratocastery Black Backplate in the entire universe! It doesn't fit my ESP Vintage Series Strat though. I got my Strat used and the holes didn't line up. No worries though. I traded it to a friend of mine that builds Frankenstrats out of parts. I'm sure this will fit your factory standard Fender Stratocaster.Eddy
6. Fender Deluxe Drive Stratocaster Pickup Set
Product Details:
The fender deluxe drive stratocaster pickups feature an over-wound design, making them ideal for high-gain amp settings. they are supercharged with the highest output of all the fender single-coil pickups, and also sparkle brilliantly when clean. the pole pieces are staggered to deliver smooth, balanced tone across every string.
Specifications:
Reviews:
Better than I hoped foranthony7658
The middle and neck pickups had a good clean sound, the bridge with distortion is very hard, I love those pickups !!!!edwinaceitunor123
7. Fender V-Mod Stratocaster Pickup Set
Product Details:
Acclaimed pickup guru tim shaw engineered ’s v-mod stratocaster pickups using a proprietary blend of alnico magnet types. voiced specifically for each position and carefully designed for top-notch tone that modern players will love, the pickups in this set are calibrated for the best possible performance whether used singly, or combined. to bring out the musicality and tonal nuances of these pickups, used the inherent characteristics of various alnico formulations to create the best blend and balance along the neck, in any switch position. in the neck pickup, alnico 2 under the bass strings, combined with alnico 3 magnets under the treble strings provide the richness and clarity you expect from the neck pickup. featuring alnico 2 magnets on the bass side, and alnico 5 on the treble side, the reverse-wound/reverse-polarity middle pickup cancels hum when used in positions 2 or 4. the bridge pickup is powered exclusively by alnico 5 magnets. each pickup features the distinctive tone, tempered with vintage-style warmth, and the crisp, clear sound that made a legend.
Specifications:
Reviews:
Very Good !!! Excelent !!!gesantos2
8. Fender American Series Strat Tremolo Bridge Assembly, Chrome
Product Details:
Two heavy-duty pivot screws let you do vibrato work, with solid steel saddles for pure fender tone and sustain. set of six powder-coated steel block saddles with off-center intonation screws, and screw-in style tremolo arm. includes mounting hardware, adjustment wrenches and tremolo arm with white tip. used on most american standard and american series (us) stratocaster models manufactured from '86-'07.
Specifications:
Reviews:
The bridge has a solid feeling heavy block and nice looking bent steel traditional saddles. Be aware that bent steel saddles do have the potential to develop a buzz from time to time, particularly on the high string. Smoothing the top of the saddle with some very fine wet and dry will usually fix this. You might also like to source shorter grub screws or shorten them yourself by grinding down the bottom of the screws, as they poke up into your hand when palm muting.mattguitarroberts
9. Fender American Deluxe Stratocaster Bridge Assembly
Product Details:
Made for fender instruments in a variety of vintage-style and contemporary models. two-pivot synchronized bridge assembly with polished steel block-style saddles, offset intonation screws, steel tremolo block, and pop-in tremolo arm. modern-style narrow spacing. assembly includes tremolo claw, tremolo/tremolo arm springs, mounting hardware, and tremolo arm. used on american deluxe and ultra series stratocaster models manufactured from 1986-present.
Specifications:
| Product Dimensions | 7 x 4 x 2 inches |
| Country of Origin | USA |
| Is Discontinued By Manufacturer | No |
| String Material | Steel |
| Number of Strings | 6 |
Reviews:
well made as u would expect from fender.mick8238
This is the fourth tremolo unit installed on Partscaster guitarsthey all work as designedpicknstrum
10. Diy Electric Guitar Kits For St Electric Guitar, Okoume Body
Product Details:
Specifications:
| Package Dimensions | 30 x 19 x 3 inches |
| Is Discontinued By Manufacturer | No |
| Back Material | okoume wood |
| Color Name | Brown, White, Black |
| Fretboard Material | composite ebony fingerboard |
| Top Material | Wood |
| Neck Material Type | Maple |
| Number of Strings | 6 |
| Guitar Bridge System | Adjustable |
| Fretboard Material Type | composite ebony fingerboard |
| Hand Orientation | Right |
Reviews:
Best kit of the 4 guitars I've built. Everything fit nice and tight. All the components fit well and are of quality. The pickups are hot. Everything plugs together, no soldering. This guitar has a bolt on neck. Gibsons factory guitars are glued in place. The bolt on fit nice and tight and was well finished. The instructions are clear. Best kit. Fun.David Guzman
Easy build few minor tweeks during setup and it was ready to go! Totally satisfiedEric Nichols
11. Fender Original '57/'62 Strat Pickups
Product Details:
This was the pickup that were made to fit the original usa 57 and 62 reissue stratocasters. fender no longer makes this type of pickup. if you have a mid 80's to mid 90's usa reissue these were the pickups used. these are the black bottom and not the earlier red bottom ones. these were also sold as separate item back in the day-in this packaging-this one is unused and read a little over 6 k on the reader. if you need to replace a dead pickup in your vintage reissue this is you ticket. note the purple colored windings as compared to the new ones. i have one more new one with same reading that i may be listing as well. so if you need 2 let me know.
Specifications:
Reviews:
I've played a lot of different Strats over the years and while they all had "that Strat sound" to varying degrees, the Fat '50s achieve seem to be the most authentic. By adding a treble bleed and turning down the volume a bit, I can get those classic chimey tones from the 50s and with the volume all the way up, I can get the bigger sounds from the 60s. The cleans are sparkling, but they sound great running through higher gain amps as well. Compared to pickups like the Texas Specials, these are not harsh to my ears, even in the bridge position. If you're looking for the solid Start sound, you can't go wrong with these,BOCTOK
The Fender Mexican made 2017 Stratocaster is a nice guitar and as a standard out of the box guitar is good. One easy way to upgrade the sound is by installing the Fender Custom Shop Fat 50's pickup set. I measured the ones on a custom shop 59 before purchase to be sure of string alignment. I purchased a set and fitted them in about half an hour, fortunately my Mex ST had an Oak type 5 way and full size pots so no more upgrade work needed there. I did change the pot knobs and switch knob to white to match the new pickup covers. I installed a new set of strings, the pickups were test adjusted and sound great, a nice full sound, the front one is very rounded and clear, the middle is a classic sound and the back nice and strong. I was after a Shadows style of sound and these pickups did not disappoint. They give a clear sound and the right sound if you are looking for pure vintage tone.matt66red
I waited 5 months to write this review, I'll try to be unbiased. I replaced the stock ceramic pickups from a Fender Standard MIM. It's my first change of pickups ever, and the first time I play a guitar that sounds so classic, so I can not tell about the difference with a higher end model of Strat or a vintage one, but here goes my opinion: This pickups totally rock, well they don't only do rock, they play everything you want to hear from a instrument called "guitar", that means, 6 strings thru a wood body, they deliver the classic and just necessary electric guitar experience. No gimmicks, just the real thing, classic clean sound, lots of harmonics, dynamic sound, and driven sound wonderful, because they can be strong too, classic surf rock sound here. Took me a couple of days to adjust the proper height, the Alnico V magnets are strong so you have to be delicate to find the right spot for the three PUs, but once you are there, they are marvellous. The three pickups are pretty much the same, states the box, but the three positions are there, and the case with the medium pickup is a great surprise, it sounds very nice, very "middy" usable position, sounds as a custom medium pickup. By all means, you don't need no more that a old school Stratocaster guitar, as Leo designed, to be happy. Cheers. Rock on, blues on, jazz on, jangly on, surf''s up!Oscar the mendigo.
12. Fender American Series Strat Tremolo Arm Tension Springs – Set Of 12
Product Details:
The fender tremolo arm tension springs helps set your tremolo arm in a fixed position when used with any fender american series or american standard series tremolo the fender tremolo arm tension springs allows you to set your tremolo arm in a fixed position when used with any fender american series or american standard series tremolo. simply insert spring into tremolo arm hole prior to installing the tremolo arm. package includes twelve tension springs.
Specifications:
| Product Dimensions | 11.42 x 7.48 x 3.54 inches |
| Country of Origin | USA |
| Is Discontinued By Manufacturer | No |
| Color Name | Black |
Reviews:
I'm giving these 5 stars because they showed up on time and, well, are springs just as advertised. They are also advertised as being for American Strats, but I bought them anyway for my MIM just to see if they would work. I shouldn't have bothered. The problem is not with the springs, however, it's with my tremolo block. If I had looked closely in the first place, I would have noticed that the hole in my block for my tremolo arm has no bottom. So the springs just fall through when dropped into the hole. I suppose one way to fix this would be to glue a cover plate to the bottom of the block. An easier way, though, is to use the trick of wrapping the threads of the tremolo arm a few times with teflon pipe thread tape. This actually works great – it gums things up enough so that the arm will stay in whatever position you set it. I imagine this trick would work fine for Am Strats as well.Tee
This little screw usually comes as standard with various American made strats, underneath that little sticker on the bridge plate. Not everyone knows that these will also work on Mexican strats with a screw in tremelo arm. The difference it makes is amazing. A nice little addition to my guitar. I highly recommend this product.9425richards
I purchased a set of these springs because the 2019 American Professional Stratocaster that I bought recently uses the "pop-in" version of the tremolo arm-and at least on my guitar, this design seems to be seriously flawed, as it results in the tremolo arm swinging and flopping around completely freely; it has no tension at all. I find this "pop-in" design to be rather mystifying, because in comparison, the MIM Player Strat that I previously owned had the screw-in version of the tremolo arm, and its tension could be easily adjusted by simply screwing the arm in or out. I've talked to two guitar techs at two different Guitar Center stores in my area, and they both basically recommended the same fix-they suggested that, to create some tension for the tremolo arm, I should just wrap some Teflon thread-seal tape around the tip of the arm. I appreciate their efforts to help, but after paying $1,500 for an American Professional Stratocaster, that solution just seems rather strange to me, and quite honestly I'm a little baffled that Fender would expect its customers to resort to such types of "fixes" for part of the design of an otherwise high-quality guitar. So, I bought these springs, thinking that they would solve the problem by creating some tension on the arm. However, the springs are EXTREMELY stiff, and after dropping one in the hole, I could not push in the tremolo arm at all. And I used some fairly significant pressure in an attempt to push in the arm-but it simply would not go in. The spring would not compress at all, and I eventually gave up because I was worried that I was going to push too hard and end up breaking something. So, bottom line is, in my experience, I found these springs to be entirely useless for a 2019 American Professional Strat, and I returned them. I haven't tried the Teflon-tape approach yet, but I expect that will be the next step. (And I will note that, other than this issue with the tremolo arm, I love my American Pro Strat model.DT
13. Fender Soft Touch Knobs Stratocaster Aged White
Product Details:
These easy-grip knobs make on-the-fly volume and tone adjustments a breeze. features set of three soft touch push-on control knobs designed to fit 1/4 split-shaft potentiometers for most u.s.- and mexico-made stratocaster models (1954-present) featured on american elite stratocaster professional installation is strongly recommended. improper installation may result in damage to the product and/or instrument.
Specifications:
| Finish | Aged White |
| Year | 2010s |
Reviews:
These knobs are a subtle upgrade to your Strat – a slight soft feel to the knobs. They normally come standard only on the Elite or Ultra level Strat; I get a kick out of installing them on my down-level Strats that use this color. The color matches the standard Aged White and they install by simply pushing them onto the pot shaft. Be careful not to scratch your pickguard when removing the old knobs – watch a YouTube video to see how. Note to Fender: make these knobs in additional colors!Brian
14. Fender Vintage-Style Standard Series Stratocaster Left Handed Tremolo Assembly
Product Details:
Made for fender instruments in a variety of vintage-style and contemporary models. nickel-plated steel vintage-style bridge assembly with six bent "fender" stamped saddles. assembly includes saddles, intonation screws/springs, and saddle height adjustment screws. tremolo block will accept standard 10/32 thread tremolo arm. does not include mounting hardware, tremolo claw, tremolo springs or tremolo arm. left-handed model. assembly features 2-1/16" bridge mounting spacing. as a result, bridge mounting screws will not directly fit onto a vintage or vintage reissue instrument and modification will be required. used on most standard series, deluxe roadhouse/lonestar, and blacktop series stratocaster models (mexico) manufactured '06-present.
Specifications:
| String Spacing | 52.4 mm (2.06") |
| Screw Mount Spacing (between outer screws) | 52.4 mm (2.06") |
| Block Depth | 42 mm (1.65") |
Reviews:
First of all – to prevent any misunderstanding about spec's – this Fender part no. 0071014049. Would be fine if musicstore could show this number also in part description. The bridge fits perfectly into a Squier 60's vibe (not the Bullit nor the Affinity!) as it is currently available in the store here – unless you do not like chrome on that guitar…. The massive trem block gives really more sustain. So if you like to keep the nickel finish from the 60's vibe Squier, just change the trem block from the bridge and you're done. Fits to the E-e string and mounting hole spacing of 2 1/16 inch (~52.3mm) This not really vintage style – only for the string riders, not for the spacings. (The vintage spacing is 2 7/32 inch which is more near to 54mm). Tremolo arm from the Squier block will NOT fit into this bridge! And it will not get loose with one of those necessary tension springs. Price/value is unbeatable.
I bought this for a partscaster project I was working on since I had read that it will bolt directly to a Squier SE Special body. I am here to verify that it bolts onto the Squier SE body without issue but cannot say whether it fits other Squier models (although I did read that it is too deep to work on the thinner Squier "Affinity" model bodies). I like the stamped saddles and the high mass block compared to the Squier unit. Side Notes: The string and mounting bolt spacing is not the same as the "vintage" Fender models (i.e.: it would not work on my MIM Fender Road Worn 50's Strat for instance). You will also need a Standard Mexican Fender tremolo bar (PN 099-2310-100), since the import one has different threads. Also, the Fender Mexican spring claw is wider than the one mounted to the Squier SE, so I just kept the original SE one in place, which works fine. Anyway, if you want an inexpensive upgrade for your lower end import Strat, I can attest to the quality of the Fender Mexican Tremolo bridge assembly… Good Luck!danzprod
I purchased this to better my sustain and after installation. The sustain was lasting to long almost five seconds, very hard to intonate. I new something was wrong. I checked the cavity and found one corner touching and after removal l was able to clear that up. Now it's as it was meant to be. Great tone increase and actually added to my playing comfort. I have the claw spring adjusted one half inch out and even making my trem exactly at 1/8 above the guitar surface. It's how l have always setup my strats and all my bends are more comfortable than with the old block. My sustain is around three seconds now and allows my compressor sustainer pedal to work properly. It's a vast improvement to tone. I can actually use 1 through 5 and all sound great no more over the edge quack and the other end not as dark. Definitely recommend, just check before you button it up that the block isn't touching the body or your notes will wring out on top of one another and most compressor s can't keep up to fix it. Custom shop neck American vintage Clapton fender noisless and believe it or not l replaced my worn out body with a new squire standard same neck pocket size just basswood it's awesome body $60 and of course the block had to go. If you upgrade your body measure the back of the neck pocket thickness and make sure it matches and dump the block and go fender big. Thanksatexx
15. Fender Stratocaster Knobs (Volume, Tone, Tone) White
Product Details:
Need to replace a missing knob? fender has what you need straight from our u.s.-made instruments. set of three plastic push-on knobs designed to fit 1/4" split shaft controls. fits nearly all stratocaster models (us and mexico) produced from 1954-present.if you need an intro on the difference between split shaft pots/knobs and solid shaft pots/knobs, have a look at the photos. the split shaft is on the left, it has a slot in the shaft, and the shaft is splined. these knobs just push on and tension keeps them in place. the solid shaft is on the right, and it is smooth and round. no splines. the knob on this stays in place with a set screw.
Specifications:
| Shape / Design | ST-Style |
| Screwable | No |
| Pluggable | Yes |
Reviews:
These knobs are a subtle upgrade to your Strat – a slight soft feel to the knobs. They normally come standard only on the Elite or Ultra level Strat; I get a kick out of installing them on my down-level Strats that use this color. The color matches the standard Aged White and they install by simply pushing them onto the pot shaft. Be careful not to scratch your pickguard when removing the old knobs – watch a YouTube video to see how. Note to Fender: make these knobs in additional colors!Brian
16. Fender Stratocaster Accessory Kit (White)
Product Details:
Volume and tone knobs tremolo arm tip & switch tip vintage-style tremolo back plate pickup covers pickup covers will not fit scn, n3 or noiseless pickups want to change the look of your stratocaster without spending a lot of money on a paint job? try sprucing it up with a stratocaster accessory kit. everything you need to personalize your stratocaster. includes volume and tone knobs, tremolo arm tip, switch tip, vintage-style tremolo backplate and pickup covers. pickup covers will not fit scn, n3 or noiseless pickups.
Specifications:
| Instrument Color | White |
| Instrument Brand | Fender |
| Style | Stratocaster |
Reviews:
I upgraded my pickups in MIM strat and wanted to go black from the existing white. I lost a humbucker for a single coil in the process and needed a new pickguard. My strat was the midnight wine color (dark) and the black looks absolutely awesome on it compared to the white. Everything fit perfect. No mis aligned screws etc as often occurs when changing out parts on some MIM strats. The strat is year model 2006. The only complaint and it is notable band the reason the rating is a bit lower: I understand black loves scratches but come on, the instant I wiped the pick guard with a very soft cloth, massive scratches. It is brand new and very scratched. Even micro fiber cloth marks it. I know it will get scratched but I wanted the shine at least until playing it caused scratches. I would prefer to pay a little more and Fender make the plastic more scratch resistant. That can be done very easily in the polymers/chemistry chosen. Other than the scratching gripe, typical good quality OEM Fender, looks sharp, fits good. Change your color and personalize your strat easily. I am glad I did.
I love the aged look of the pickup covers and knobs. I have ordered many over the years. The tremolo cover does not match at all and usually has a mint green color. That part of the kit is a waste. I have piles of them which I cannot use. The best look for your Strat is a W/B/W pickguard with matching tremolo cover and these pickup covers and knobs. I will continue to buy the kit. I have tried several others and they are always lacking.lawellness
17. Musiclily 3r3l Sealed Guitar Tuners String Tuning Pegs Keys Machine Heads Set For Les Paul Style Eelctric Guitar Or Acoustic Guitar, Black
Product Details:
Economy 3 per side sealed tuning key set for acoustics and electrics guitar,it will fit standard 13/32 inch (10mm) peg holes. alloy metal made; color: black sealed tuning pegs style head size is 21mm width;full set, nut,ferrule,screws are included. package includes: 6 pcs machine heads
Specifications:
| Package Dimensions | 3.62 x 3.15 x 0.63 inches |
| Is Discontinued By Manufacturer | No |
| Color Name | Big Button Black |
| Number of Strings | 6 |
Reviews:
These worked better than the ones that came on my Squire guitar. If these are not working for you, one thing you can try is changing out the plastic nut for bone and/or making sure the strings are not bound by the nut. Use one of those cheap pocket string files (ones that have files that fold out).onefunstore
Very poor quality. Would not stay in tune for five minutes. Replaced with a set of Groovers. Do yourself a favor just get the groovers or hip shot first save yourself the aggravation of having to change them twice. I originally got them because I needed to replace tuners, the price was very attractive. The finish is very good, alas the quality of the internals was lacking.airdogone
18. Gibson Modern Machine Heads Nickel
Product Details:
If you re going to replace parts on your current gibson guitar or restore a classic gibson, why not use genuine gibson accessories and parts? these genuine replacement parts are made with the same high standard for quality as gibson s instruments. gibson s modern machine heads with metal buttons are the perfect replacement tuners for any guitar, helping to maintain the value of your instrument while ensuring precision tuning in a sleek, durably built package that s as tough and dependable as the originals. you owe it to your guitar to use these genuine gibson replacement parts.
Specifications:
| Intended Instrument | Guitar |
| Configuration | 3+3 |
| Finish | Nickel |
| Gear Ratio | 14:1 |
Reviews:
I recently went to my local GC and bought pickups, pots, knobs, and an output jack for my 1981 SG Firebrand. While I was taking the strings off, I realized I should have bought tuners, too. These are the exact same tuners I had on the guitar, so I didn't have to do any drilling. They were a snap to install and since they're not 29 years old (have I really been playing guitar that long?) they look FANTASTIC. Best of all, like one of the other reviewers said, they hold their tune as well as more expensive machine heads. If you have a Gibson with Grovers (that's what these are) and you need to replace them, forgo the pricey models and keep your guitar "stock" with these.
Grover tuners have rocked for years, and this set is no different. The fact I did not need a drill, or a trip to repair shop, plus the rock solid performance of the Grover design makes this the ideal choice for anyone looking to upgrade. I would not choose anything else. I must also mention these things look killer on the guitar. These tuning machines are direct replacements for the Gibson deluxe plastic tulip style machines. These tuners bolt right up using the existing bottom hole for the deluxe tuners so no drilling is required. The top hole is nearly covered up but still visible, However the improvement in tuning is well worth it. The washers, threaded inserts, and mounting screws are all identical to the deluxe, this set defines "direct replacement". This set is made by Grover for Gibson, They are stamped Grover on the tuner. The tension is adjustable and they are absolutely rock solid. Same tuner as the original Grovers with the "kidney style" button, but with metal "tulip deluxe style" buttons. Fantastic price, and easy for anyone to install. No trip to the repair shop needed.
19. Fender Pure Vintage '50s Stratocaster Accessory Kit
Product Details:
Fender american pure vintage 50s stratocaster accessory kit includes eggshell (off white) vintage style control knobs, pickup covers, tremolo arm tip and switch tip (backplate sold separately). introduced on early '50s stratocaster guitars. fits most vintage and modern stratocasters. pickup covers will not fit n3 noiseless or scn pickups. fender american pure vintage 50s stratocaster accessory kit includes eggshell (off white) vintage style control knobs, pickup covers, tremolo arm tip and switch tip (backplate sold separately). introduced on early '50s stratocaster guitars. fits most vintage and modern stratocasters. pickup covers will not fit n3 noiseless or scn pickups.
Specifications:
| Product Dimensions | 8.5 x 1.73 x 4.49 inches |
| Country of Origin | USA |
| Is Discontinued By Manufacturer | No |
| Color Name | Eggshell |
Reviews:
Really hard to find this colour. Was really happy to get it. Looks great on my 62 Strat with a Mint Green Pickguard.paulrhanna
For as much as I love my '99 AVRI 57-reissue Strat, I always hated the "aged white" plastic parts installed in that bright white pickgaurd. The 'aged-white" is actually cream… I've seen real 57's in person and in tons of books, and I've never seen one that has the mismatched look of the later AVRI 57's. These make my Strat look as it should.jason_s421
Great products…Super fast shippinggcp81
20. Fender Vintage-Style Strat /tele Tuners, Gold
Product Details:
Set of six gold machine heads/tuners designed to fit most vintage-style fender electric guitars. used on various stratocaster, telecaster, jazzmaster, jaguar, cyclone and toronado guitars. set of six gold machine heads/tuners designed to fit most vintage-style fender electric guitars. used on various stratocaster, telecaster, jazzmaster, jaguar, cyclone and toronado guitars.
Specifications:
| Finish | Gold |
| Year | 2010s |
Reviews:
Love the vintage style tuners, for perfectly with 10 mm conversion bushings and hold tune great.behold2man
Related posts:
- Acoustic Electric Guitar Packages For Sale (2024 Update)
- Buy Beginner Electric Guitar For Sale (2024 Update)
- Electric Acoustic Guitar Package For Sale (2024 Update)
- Electric Bass Guitar Ibanez For Sale (2024 Update)
- Electric Guitar Body Mold For Sale (2023 Update)
- Electric Guitar Bridge Lifting Up For Sale (2024 Update)
- Electric Guitar Packages For Beginners For Sale (2024 Update)
- Electric Guitar Parts Explained For Sale (2024 Update)
- Electric Guitar Parts Kit For Sale (2024 Update)
- Fender Electric Guitar Models For Sale (2024 Update)
