Are you looking for the Bass Guitar Preamp Kit? If so, you’ve come to the right place.
Choosing the Bass Guitar Preamp Kit can be difficult as there are so many considerations, such as Roland, Ampeg, Sadowsky. We have done a lot of research to find the top 20 Bass Guitar Preamp Kit available.
The average cost is $191.62. Sold comparable range in price from a low of $17.02 to a high of $399.00.
Based on the research we did, we think EMG BQC System Active Bass Preamp System is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Bass Guitar Preamp Kit (20 Sellers)
Product Image | Product Name | Features | Check Price |
---|---|---|---|
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|||
|
|||
|
|||
|
|||
|
Reviewers Noted:
Craftsmanship . Sound quality . Ease of installation
Features:
- A complete control system for bass guitars
- Active balance, master volume and eq circuits are included
- The eqs allow you separate control over bass, midrange, and treble all via 2 concentric/stacked pots
$299.99
4.9
Reviewers Noted:
Ease of use . Size
Features:
- Adjustable knobs help let you modify the pedal modes conveniently
- Engineered to operate at a low voltage of 18 v for enhanced performance
- Buffered bypass reduces the distortion for an immersive sound experience
$139.99
5.0
Features:
- Operates at 9 or 18v
- All fet design
- High headroom, low noise
$74.76
5.0
Reviewers Noted:
Sound quality
Features:
- Captures the natural acoustics of your electric guitar
- Warm, full-bodied, and clear amplification
- Automatic mono/stereo switching
Reviewers Noted:
Size
Features:
- Delivers a wide range of authentic ampeg tones.
- Classic 3-band tone stack plus volume.
- Ultra-hi and ultra-lo circuits for tonal flexibility.
$169.99
4.8
Reviewers Noted:
Good sound quality
Features:
- Includes stacked treble/bass pot, mid pot, and black mini-toggle switch for midrange frequency selection.
- Plus/minus 18db bass at 40hz.
- Plus/minus 16 db of cut and boost at either 400hz or 800 hz.
Reviewers Noted:
Easy to use . Heavy . Sound quality . Portability . Build quality
Features:
- Aux interface offers hassle-free connectivity with external speakers
- Scrambler overdrive provides convenience of controlling bass level
- Built-in headphone jack lets you connect with in-ear monitors and headphone
Reviewers Noted:
Good sound quality
Features:
- Rolling off the treble design offers enhanced bass tones
- Mini-toggle switch helps in controlling the range of frequency
- Transparent circuit build enhances sound quality of your instrument
Reviewers Noted:
Sound quality . Craftsmanship
Features:
- Suits emg pickups only
- Has a pre-wired balance control / blend, master volume, separate bass and treble pots along with the concentric/stacked mid-control
- All the eq controls and balance control has a center detents, for flat response
Reviewers Noted:
Compact
Features:
- Never gigged
- Never had velcro
- Perfect condition
$160.49
5.0
Features:
- 9 volt battery (9 volt operation) or 2.
- 9 volt batteries (18 volt operation) which yields 6 db extra headroom.
$209.95
5.0
Reviewers Noted:
Good sound quality
Features:
- Make sure this fits by entering your model number.
- Note : this is an acoustic guitar pickup system, and is not meant for ios devices.
- Acoustic guitar pickup system with built-in tuner.
$169.99
4.6
Reviewers Noted:
Good sound quality
Features:
- Multiple wiring options let you install this onboard preamp with various instruments
- Flexible preamp design facilitates easy control over boost and cut functions
- Comes with a battery backup of 324 hours to deliver long-lasting use
$389.95
5.0
Reviewers Noted:
Easy to use . Sound quality . Size
Features:
- Two-channel bass preamp for 1 or 2 basses
- Built-in radial direct box with low-z balanced out
- Combination power boost and effects loop
$142.99
4.6
Reviewers Noted:
Easy to use . Size . Weight
Features:
- Recreate the tunes with various sound effects from your guitar by using this pedal
- Noise reduction rating of 22 db helps reduce distortion level for clear audio
- The 1/4" output offers a reliable connection with compatible devices
$74.76
5.0
Features:
- Incredibly authentic, studio-quality acoustic tone.
- Natural compression totally eliminates piezo "quack".
- All the benefits of graph tech's patented string saver saddles.
Features:
- Specially designed for acoustic guitars, but also very well suited for many other acoustic instruments
- Excellently suited in combination with the pure pickups
- Special broadband center filter
Features:
- Diligently crafted open mic preamps help to provide high-quality acoustics for recording
- Engineered to record amazing audio quality
- Its compact design makes it easy to accommodate
Features:
- Great for recording bass and guitar.
- Excellent condition minor scratches on top bottom and sides of item.
- Works perfect.
Features:
- Better design: dual potentiometers design, easily decrease the noise and amplify the sound of bass.
- Excellent performance: balance volume for bass pickup, provide better control of tone with high quality signal.
- Convenient suit: full accessories for easy installation, practical and convenient to operate.
1. Emg Bqc System Active Bass Preamp System
Product Details:
The emg bqc system is a complete control system for bass guitars. active balance, master volume, and eq circuits are included. the eqs allow you separate control over bass, midrange, and treble all via 2 concentric/stacked pots. rotate the control clockwise to boost, counterclockwise to cut. there is a center detent for flat response. the mid-range control has a variable frequency knob that allows you to sweep through the mid-frequency range from 100hz to 1khz. this selects the frequency to boost or cut.
Specifications:
Reviews:
Overall: I have put this preamp in two of my basses now and I absolutely love it. Super easy to install with no issues!!! This preamp has several cool features I love. For me the best part is being able to select the exact mid frequency you want to boost or cut. It’s also super cool that there are four different curves you can choose from on the treble boost/cut. All these features make for a very versatile preamp you can use to dial in any sound you want right on your bass.In response to the other review on here I don’t know what that guys problem was. When you install the knobs you just have to make sure you leave a little space between the knobs and the nut below them. All you have to do is just lift up slightly on the knob while you tighten the set screw.Timothy
Overall: Dont even bother with this junk…..Will never EVER buy again. EVER!!!!If I could give this system a 0 instead of 1 star I would. I bought this set close to a year ago and it has been a nightmare the whole time. The biggest problem with this system is the "d" shape shafts on the concentric pots. I tried knobs that I had ordered for this upgrade and they did not work very well because the upper small knob kept dragging on the top of the bottom larger knob. I contacted EMG and they said that they sold knobs on their website so I ordered those knobs. They did the same thing. I contacted them again and they wanted me to send them the set with the plate where the pots were attached to. I sent them the whole thing yet they could not fix the problem and sent it back to me with no solution. They are not willing to give me back my money so a year later and I am still stuck with this useless set from EMG. I have installed many high end preamps and also cheap preamps from China and all the pots are always smooth. EMG should be embarrassed to sell this junk. Right now it is still in its box not being used because when I tried to use it the knobs kept sticking and it was very embarrassing. NEVER AGAIN will I by from EMG. They have really let me down. I am at the process of contacting the commerce department in their area to file a complaint. All this calamity because they want to save a buck.Sotero
2. Aguilar Tone Hammer Bass Preamp/direct Box
Product Details:
This preamp/direct box is so strong and powerful it could only be called the “tone hammer”! `based on the respected obp-3 preamp, the tone hammer features fully sweepable midrange frequencies in addition to bass and treble controls. with the tone hammer’s pristine d.i. you are set for the studio or the stage. to give this tone shaping unit the ultimate flexibility aguilar introduced their proprietary adaptive gain shaping circuitry (ags). ags allows the player to kick in an additional gain structure and eq with the “stomp” of a button. you can now go from modern slap sounds to vintage or overdriven. 18 volt operation gives the tone hammer plenty of headroom to reproduce the most dynamic playing style. separate gain and master controls allow you to dial in just the right gain structure for any instrument. the tone hammer is the essential preamp/direct box for every bassist’s tool box.
Specifications:
Votage | 18V |
Number of Batteries Required | 2 |
Number of Band | 3 |
Material | Brass |
Connector Type | XLR |
Reviews:
I must've been living under a rock. I just discovered Aguilar stuff. After listening to some samples of the TH, I was impressed. After getting it from MF and hooking it up to my five string Peavey Foundation, I was instantly hooked. I'll never play a note again without this thing. Yes, it's that good. I love that you can get scooped sounds for funk and distorted sounds for rock. It makes any bass, especially a passive one, sound like it costs like a million. Downside is Aguilar stuff is a little pricy, but I got the MF discount, and I'll probably get their other pedals if I can find a great deal on them. I highly recommend this pedal.Bassdude123
Good thing – eq doesnt colorize the sound and makes it bigger and warmer. Bad thing – AGS mode makes signal louder. You cant switch device when playing song without dB jump. But you can keep AGS allways on. In fact, I would recommended this device for people, who wants to add big sound to passive basses on stage or in studio.dimakanda
This thing just sounds great. The tone stack seems perfect for bass. I couldn't dial in a bad sound once I had the gain's and master's for both pedals set. I use a Markbass Compressore in front of it. The secret to the AGS boost is to keep the Tone Hammer's gain LOW and use the Master for makeup gain. Start at 9:00 and adjust from there. Then the AGS boosts the signal for soloing just enough to sound like a tube amp on the edge of breakup but still sounds like your "tone" and not a fuzztone. I haven't tried the DI partblues_disciple
3. Aguilar Obp-1 Onboard Bass Preamp
Product Details:
The obp-1 bass preamp's boost-only design gives the tone-shaping benefits of active electronics without losing the inherent sound of the instrument. the obp-1's discrete, all-fet circuitry features up to 18db of boost at 40hz and 4khz, creating a sonic environment high in dynamic headroom and low in noise. aguilar preamps have high headroom, low distortion and reproduce the full dynamic range of instrument. a great upgrade for any bass!
4. Graph Tech Ghost Acousti-Phonic Basic Guitar Preamp Kit
Product Details:
The pe-0240-00 is the basic ghost acousti-phonic preamp kit. it includes all the basic components you need (except pickups) that you will need to add realistic acoustic tone to your electric guitar. the acousti-phonic for guitar includes: pd-0240-00 acousti-phonic preamp board eq'd for guitar pd-0103-01 switchcraft stereo switched output jack pe-5003-00 stereo output jack cable assembly pe-5002-00 acoustic volume cable assembly pe-0204-00 battery connecter (connects 9v to preamp) pe-0205-00 battery holder (metal clip that holds 9v battery) pe-5017-00 summing board (not pictured) pe-5021-00 dual connector cable (not pictured) the pe-0240-00 is the basic ghost acousti-phonic preamp kit. it includes all the basic components you need (except pickups) that you will need to add realistic acoustic tone to your electric guitar.
Specifications:
Finish | Standard |
Year | 2010s |
Reviews:
This enhances the Graphtech Ghost bridge I installed. Installation was relatively simple since all the wiring is modular and plugs into the pre amp. Minimal soldering was required for the jack and switches. There are a lot of wires so the electronic cavity in my guitar is full but I did not have to enlarge it or modify the cavity.Martin
Absolutely the best acoustic guitar sound from any electric guitar hands down. I've tried and owned aftermarket piezo systems and OEM piezo equipped guitars, the ghost just has that nature sound. It reacts like a "plugged in" acoustic guitar. Soft passages are smooth and even, all the strings have equal output, something the other systems did not have. Step into it and the Ghost just gets dynamic, no piezo "quack" or unnatural thin, sharp distorted tones. Add the fact that string breakage becomes a thing of the past, will pay for its self inside a couple of months. Once you've been able to play a cool acoustic intro, then light into the electric chorus, you'll never go back!Anonymous
5. Ampeg Classic Analog Bass Preamp Pedal
Product Details:
Inject genuine ampeg tone into any bass amp or di box with the ampeg classic analog bass preamp! with its 3-band eq, you can dial in a wide array of tones, while still retaining that distinctive ampeg "growl" and kick. the ultra-hi and ultra-lo switches let you boost the high and low frequencies for more low end depth and high end snap. there's also a movable jumper in the pedal to compensate the input signal for active pickups. it's your ampeg in a pedal!
Reviews:
I use it in my pedalboard at the end to beef up the sound. holds its own against my tech21 sansampDerek
I listened to several demos and was excited to use this pedal. However, it just produces too much noise and hiss. I appreciate that it could be my bass with no shielding but I have 4 other brands of pedal, all silent except 1 cheap OD pedal and even this has far less noise. So effectively pedal is unusable. I tried to use the Ampeg in all positions – bass direct, in effects loop and various paces in my chain but no difference. Definitely try/consider before you buy.William S.
I had been using the MXR bass DI+ as a preamp/eq setup for about 16 years. I loved that pedal and couldn't imagine my rig without it. It started showing it's age a few months ago so I broke down and bought this thing because well it's Ampeg and on SALE. This pedal was a game changer! It adds so much color to my sound and fattens it up at the same time. Love it.
6. Aguilar Obp-3sk Onboard Bass Preamp
Product Details:
Active electronics and preamps give you bands of eq to shape your bass's tone. using these active eqs lets you find your signature sound directly from your bass. aguilar sets the standard for aftermarket onboard preamps. the aguilar obp-3 runs at 9v or 18v and is the most flexible onboard preamp/eq aguilar makes. you get three bands with 18db boost/cut at 40hz 16db of boost/cut at either 400hz or 800hz and 16db of boost/cut at 6.5khz giving you the fat tone-shaping you need.
Reviews:
Replacing an onboard preamp should be done voluntarily. This was most certainly not. After 1,000+ gigs I 'upgraded my 95' Modullus Quantum 5 from the Bartolini NTMB 18v system to an Aguilar OBP3 loved it for 9 months until it died at a gig (there is no active/passive switch, and yes it was totally EMBARRASSING & EXPENSIVE).The repair tech in Dallas said quote "I've had to replace 5 OBP3's recently, they are made in China now & are NOT serviceable" (the circuit board is filled with epoxy).I ordered a Glockenklang 3 band unit and I have NEVER been happier with my bass. The passive/active push-pull volume pot is almost identical in output (given the tone controls are at center).Much happier!Donno Disposable electronics have no place on stage. It is sitting in a drawer. It has no value.
I've only heard good review for this preamp. Which instantly made me skeptical. Well after blowing my other preamp (all my fault) I tried it and man I should have bought it years ago, it's everything I need and them some. I'm not quite sure how to make this sound like a Real review I sure don't want this to sound like a paid review I don't do paid reviews, especially if I'm spending money on a product.The Groovinator
7. Ampeg Scr Di Bass Di Preamp With Scrambler Overdrive
Product Details:
The ultimate "ampeg-in-a-pedal"! the ampeg scr-di is a bass preamp / d.i. that you can use as a preamp, d.i. box, overdrive pedal, and headphone bass amp! bring authentic ampeg tone wherever you are! the scr-di has the classic ampeg 3-band eq for precise tone shaping. the ultra lo switch boosts the bass for deep and punchy low end. the ultra hi switch boosts the highs for added snap, attack, and bite. you can also switch on the built-in scrambler overdrive when you need some "push" or "growl", or if you really want filthy distortion for extreme styles. for setup versatility, there is a di xlr output and a 1/4" line out jack. hook up the xlr direct to the mixer/pa or run the scr-di through a bass amp via the 1/4" jack. good news is, you can also run both outputs simultaneously; a great solution for front-of-house and monitoring. the headphone out also gives out true bass cabinet sound through your headphones, so you can still enjoy big ampeg tone even on late nights without disturbing your neighbors. and as bonus, the scr-di also has a 3.5 mm aux input so you can connect your phone or music player and jam along audio tracks.
Specifications:
Product Width | 7.6 inches |
AC Adapter Included | No |
DC Adapter Included | No |
Product Weight | 2.6 pounds |
Product Name | Bass Preamplifier |
Effect Type(s) | EQ |
Indicator Light(s) | Yes |
Brand | Ampeg |
Signal-to-Noise Ratio (SNR) | 90 decibels |
Product Length | 4.3 inches |
Battery Size | 9V |
Product Height | 2.2 inches |
Reviews:
This box is terrific. My basses sound great through it and there is a wide range of tones available. The scrambler circuit is a real hayride. Im running an instrument, a mic and an iPod through it and it all works great. My cheap electric guitar even sounds worth keeping now. My issue is power. The battery is buried behind the back plate. You have to open the box to get to it. The box does not come with a power supply. Musicians Friend benignly neglects to tell you this. You should talk to MF for power supply suggestions.tomgray56
Overall: I recently picked up an inexpensive Bugera rig for live gigs, which was great "oomf" for the price, but it didn't quite have the tone or character I wanted. Very flat sound, but affordable! Enter the SCR-DI! I wanted something with some crunch built in, that also had DI out. But the headphone out and AUX in on this definitely peaked my interest, as its always nice to have after-hour practice options. I plugged it into my head, and as soon as I switched it on I was in tone heaven. Even with the EQ settings all set flat, this box gave my bass tone that color and chunk I was looking for. Then of course with the Ultra Hi/Lo settings there's even more flexibility on how round, snappy, or smooth you want. The scrambler sounds great. I prefer the drive and blend both set to 12-o'clock, just to give some crunch on the top end, that gets more dirty the harder you play. Cranked all the way is almost fuzz territory. The paint job makes it look plastic but it's a rugged all metal chassis so I'm sure this'll be part of my rig for a while. Overall I'm super pleased with this. Highly recommended if you're in need of a DI box or just looking for an all-in-one solution to make your rig sound more Ampeg-ish.Alexander
Sound: The pedal has a buffered sound. When not using the preamp, you'll need to use another pedal to boost volume levels. That said, I love the tone stack. The SVT sound really comes through. I really like the way my bass sounds through it. Can't really say if the tone stack "colors" the bass tone. For my style and my current bass set up in praise and worship (Yamaha TRBX305 with Aguilar Super Doubles and a Seymour Duncan STC-3P), I begin with my EQ set to noon. If I'm using a lot of finger style that day, I'll boost the mids to about 1 or 2 o clock, and sometimes the bass to about 1 o clock. For slap and funk tones, I like to set the bass and treble to 1 o clock. and mids at noon. Features: I love that I can use it as a practice amp. We went through some struggles recently and had to get rid of a fender halfstack and found myself with nothing to practice with. This pedal made practice possible. I'm not really a fan of the overdrive circuit, and currently have a love/hate relationship with it. The ultra-hi and lo settings are interesting. I don't use the ultra hi boost, but the ultra low I'll use with overdrive to help make up for any bottom end I lose. Sometimes I'll use it too if I need thick bass for something slow but epic. My only wish is that I could have slightly better EQ controls, specifically with the mids, maybe a parametric sweep, or even a switch with preset frequencies. Ease of Use: Very easy to use. Beware, if you put a battery into it, it will buffer your signal even if it's off. I really like that I can unscrew the back pack without the use of tools of any kinds. The rubber pads underneath are designed to also function as thumb screws, very easy to take off and replace, which makes replacing batteries on the fly a very simple task. Quality: The pedal feels heavy and tough, but I cannot yet speak on it's reliability although it hasn't failed yet. Value: It's expensive but worth it. The Wow Factor: No real wow factor. It is a nice solid pedal but nothing crazy or particularly special about it. Overall: I love this pedal. My purpose for purchasing this pedal was to improve my bass tone. I figured the best way was to look for something I could use to split my signal between the stage amp and the house system at my church. I'm not a fan of the stage rig we use, so this pedal allows me to bypass the rig. The best part was the added unexpected bonus of total ground noise elimination! For some reason, utilizing the XLR output from the amp head to the house resulted in ungodly amounts of noise. I now get a cleaner signal to the house and can better control my volume (the stage rig is very old and has sensitive volume controls).Christian
8. Aguilar Obp-3tk Onboard Preamp
Product Details:
Active electronics and preamps give you bands of eq to shape your bass's tone. using these active eqs lets you find your signature sound directly from your bass. aguilar sets the standard for aftermarket onboard preamps. the aguilar obp-3 runs at 9v or 18v and is the most flexible onboard preamp/eq aguilar makes. you get three bands with 18db boost/cut at 40hz 16db of boost/cut at either 400hz or 800hz and 16db of boost/cut at 6.5khz giving you the fat tone-shaping you need.
Specifications:
Sensitivity | 18 dB |
Output impedance | 100 Ohm |
Input Impedance | 1 meg Ohm |
Battery life | Up to 324 hours |
Wire Lead Length | 6.50" |
Reviews:
Replacing an onboard preamp should be done voluntarily. This was most certainly not. After 1,000+ gigs I 'upgraded my 95' Modullus Quantum 5 from the Bartolini NTMB 18v system to an Aguilar OBP3 loved it for 9 months until it died at a gig (there is no active/passive switch, and yes it was totally EMBARRASSING & EXPENSIVE).The repair tech in Dallas said quote "I've had to replace 5 OBP3's recently, they are made in China now & are NOT serviceable" (the circuit board is filled with epoxy).I ordered a Glockenklang 3 band unit and I have NEVER been happier with my bass. The passive/active push-pull volume pot is almost identical in output (given the tone controls are at center).Much happier!Donno Disposable electronics have no place on stage. It is sitting in a drawer. It has no value.
I've only heard good review for this preamp. Which instantly made me skeptical. Well after blowing my other preamp (all my fault) I tried it and man I should have bought it years ago, it's everything I need and them some. I'm not quite sure how to make this sound like a Real review I sure don't want this to sound like a paid review I don't do paid reviews, especially if I'm spending money on a product.The Groovinator
9. Emg Bqs Active Bass Eq System
Product Details:
For emg pickups only. this system features a pre-wired balance control (blend), master volume, separate bass and treble pots along with the concentric/stacked mid-control. all the eq controls and balance control feature center detents. this active eq circuit for bass guitars works by rotating the control clockwise to boost, counterclockwise to cut. there is a center detent for flat response. the mid-range control has a variable frequency knob that allows you to sweep through the mid-frequency range from 100hz to 1khz. this selects the frequency to boost or cut.
Specifications:
Product Dimensions | 5 x 4 x 3 inches |
Is Discontinued By Manufacturer | No |
Color Name | Black |
Compatible Devices | Guitar |
Output Wattage | 5 Watts |
Reviews:
Good sound adjustment good qualitykakakafka
These guys have great product at a competitive price & good communication.chingochongo
I ordered this to replace the malfunctioning preamp in my Peavey Cirrus USA 5 string bass. Had to do some modification with the wiring since the factory pickups aren't EMGs. Sounds amazing! This is actually the third one that I've purchased (I installed one in my Spector Legend 5 Custom, one in my Peavey Cirrus USA 5, and THIS one that I'm going to install into my Cirrus USA 6). I used to not be a fan of stacked mid controls, but the BQS system changed my thinking!bassdude70
10. Palmer Pocket Amp Bass Portable Bass Preamp (Pepampbass)
Product Details:
The palmer mi pocket amp for bass is a multi-purpose effects pedal and preamp that provides extensive sound shaping options for active and passive bass guitars. this versatile unit is ideal for gigging, and recording, and also features a headphones output for quiet play-along practicing. equipped with clean, overdrive and fuzz modes with adjustable drive and saturation, a 3-band eq with semi-parametric mid control. also includes vintage or modern cabinet simulation that is especially voiced for bass guitars. includes sturdy footswitch for mute or bypass control .
Specifications:
Technology | Solid state |
Inputs | 2 |
Input Connectors | 2 x 1/4" / 6.3 mm |
Input Impedance | 1 MOhm |
Outputs | 4 |
Output Impedance | XLR- 100 Ohms 1/4" / 6.3 mm TRS- 500 Ohms |
Channels | 1 |
Indicators | On/off, peak, and signal |
Effects Loop | Yes |
Operating Voltage | 9 V battery, 9 to 12 VDC |
Material of Construction | Aluminum die-cast |
Dimensions | 3.9 x 3.9 x 2.2" / 10.0 x 10.0 x 5.5 cm |
Box Dimensions (LxWxH) | 4.8 x 4.8 x 2.8" |
Reviews:
Wonderful piece of kit. Extremely versatile with some great eq and it looks good too!Reviewed by Andertons Music Co.
The Palmer Pocket Bass Amp is the perfect solution for those times and places where practicing through an amp is not possible. It's preamp system is excellent, and the ability to use an external audio source (e.g. backing track, MP3 file) to learn new songs is very helpful. I also have to note that this little box is not JUST for bass guitars. I am successfully using it with acoustic/electric and electric guitars for practice. It's a great value – lots of features packed into a small footprint for not a lot of money.timonbass
11. Bartolini Preamp Kit
Product Details:
The ntbtg-918 is a tone control preamp with fully independent bass and tone controls and a prewired gain control trim potentiometer. it emits very low noise and features a wide boost/cut range. it's smaller than a 9v battery and produces very clear and transparent sound. distortion is well below 0.001%. the preamp can be used with either 1 – 9 volt battery (9 volt operation) or 2 – 9 volt batteries (18 volt operation) which yields 6 db extra headroom.
Specifications:
Made In | United States |
Reviews:
12. Fishman Presys+ Onboard Preamp System
Product Details:
The presys plus from fishman is a preamp system designed to offer simple and versatile controls in a compact housing for instruments such as acoustic guitars and basses. the system includes the preamp unit, a 1/4" endpin jack, and a fishman sonicore pickup, all pre-wired for solder-free installation. the presys plus also delivers a built-in tuner with led display. equalization is handled via 3-band eq controls (bass, middle, and treble). the brilliance knob provides additional high-frequency tone shaping. the volume control can be used to make up for any level changes incurred by drastic equalization. combat feedback problems, common in live performance scenarios, by adjusting the notch control. when mixing signals from pickups and microphones together, use the phase switch to maintain phase coherency. the presys plus is powered via a single 9v battery (available separately). a convenient low-battery led indicator lights up when the battery is nearing the end of its life, which extends up to 88 hours. battery replacement is easy due to the pivot design of the preamp's control panel.
Specifications:
Weight | 1 lb |
Reviews:
Turn your sad old guitar into a Vibrant Tone , Enjoyable Upgrade. Very easy to install, no soldering, great sound.weaver7534
excellent! works very well.luthier-1
This is a great product, sounds good as it shouldcentraliamusic
13. Aguilar Obp-3tk/pp Onboard Preamp
Product Details:
Active electronics and preamps give you bands of eq to shape your bass's tone. using these active eqs lets you find your signature sound directly from your bass. aguilar sets the standard for aftermarket onboard preamps. the aguilar obp-3 runs at 9v or 18v and is the most flexible onboard preamp/eq aguilar makes. you get three bands with 18db boost/cut at 40hz 16db of boost/cut at either 400hz or 800hz and 16db of boost/cut at 6.5khz giving you the fat tone-shaping you need.
Specifications:
Wire Lead Length | 6.5" |
Battery Life | Up to 324 hours |
Bass Control | 18 dB @ 40 Hz |
Output Impedance | 100 Ohm |
Input Impedance | 1 Meg Ohm |
Reviews:
Replacing an onboard preamp should be done voluntarily. This was most certainly not. After 1,000+ gigs I 'upgraded my 95' Modullus Quantum 5 from the Bartolini NTMB 18v system to an Aguilar OBP3 loved it for 9 months until it died at a gig (there is no active/passive switch, and yes it was totally EMBARRASSING & EXPENSIVE).The repair tech in Dallas said quote "I've had to replace 5 OBP3's recently, they are made in China now & are NOT serviceable" (the circuit board is filled with epoxy).I ordered a Glockenklang 3 band unit and I have NEVER been happier with my bass. The passive/active push-pull volume pot is almost identical in output (given the tone controls are at center).Much happier!Donno Disposable electronics have no place on stage. It is sitting in a drawer. It has no value.
I've only heard good review for this preamp. Which instantly made me skeptical. Well after blowing my other preamp (all my fault) I tried it and man I should have bought it years ago, it's everything I need and them some. I'm not quite sure how to make this sound like a Real review I sure don't want this to sound like a paid review I don't do paid reviews, especially if I'm spending money on a product.The Groovinator
14. Radial Bassbone Od – Bass Preamp
Product Details:
The radial bassbone is a power-packed bass preamp that combines on-stage efficiency, amazing tonal control and superb audio performance making it the ideal front end for both live and studio recording. designed as a bass command center, the bassbone lets you connect two basses and seamlessly toggle between them using a footswitch. each channel is equipped with a separate level control to balance the two instruments. this is augmented with a unique eq that enables you to adjust the tone for each instrument to match with your bass amp. in fact, the eq is so powerful that you can toggle between channels to emulate switching from a p-bass to a rickey using the same bass! for added stage control, a second footswitch engages a power booster for soloing. this works double duty to turn on an effects loop. the bassbone's highly acclaimed audio circuit features full sized discrete electronics for optimal signal flow to deliver the sound of your bass to your amp with minimal distortion or artifact. outputs include a ¼" instrument output for the stage amp, separate always-on tuner out, and a built-in radial direct box to feed the pa or recording system.
Specifications:
Weight | 3.4 lb |
Reviews:
My principal use of the Radial Bassbone OD is for playing a 2007 Yamaha TRB-1005 five-string active bass as accompaniment for a grand piano and 4-part choir at Sunday morning Mass in a church space that seats several hundred. I need to connect to both the house sound system and an amplifier. The Bassbone DI delivers a clean, quiet signal and it's great to be able to select post-EQ for the DI since the house sound is a non-adjustable, set-it-and-forget-it system. Also, the high pass filter switch has made it easy to get rid of the boominess I otherwise get in this space but keeps the clean fundamental tones I want. I run one pedal through the fx loop, always on. It's very convenient that there's always a signal to the tuner jack, even when the mute foot switch is engaged. That makes it possible to quickly tune before and during the service without having to separately mute the amplifier and the house sound. Because of the nature of the music and the setting, use of the overdrive circuit is limited, but I do find that with the Drive, Mix and Tone knobs turned down low, it still helps the notes "sing" a bit, which is effective on slower passages where notes benefit from a little more sustain. The EQ makes it easy to dial in a sound that supports what's coming out of the piano so the two instruments really sound like they belong together. At home, I also play a '73 passive P-bass through the Bassbone and have noticed the sound benefits considerably from the Drag adjustment available on Channel B. In combination with the EQ section and the Mid frequency select switch, I get the best sound from the P-bass I've ever had. So, for me, the Bassbone OD has great connectivity capabilities and makes it easy to get a pleasing and controllable sound. I'm not a professional player, but do have an obligation to have a professional sound for the type of music and the space where I play. That makes it well worth the price.AJ
Radial out did themselves on this one!!! Total control of tone and the overdrive is super dope! Must have!!!Aaron B
Bought this little gem used but in excellent condition. The first thing i noticed when taking this thing out of the the box was how solid and well built it really is. Not only are all the switches and knobs solid and well placed but it's all the little things that make this pedal so good. Having a pre – post switch on the DI, being able to set up the overdrive function for overdrive, efx or both. The PZB, Drag and Blend controls along with the fact of just having a knob to turn instead of having to scroll through a bunch of presets. I love the fact that I can switch between my fretted and fretless bass sound with just the click of the A/B switch. In my case I play a lot of gigs that are straight to the PA (no amp) and this pedal if perfect for this. My PA guy almost loves this pedal more than I do.Mr. Montuno
15. Hotone 211510 B Station Bass Preamp
Product Details:
This is a lovely little bass di and preamp pedal. the pedal includes active eq, master volume, and a drive channel with a blend knob to mix the effected and dry signal. a couple of the unique features this pedal has over many other di/preamp pedals are the 1/8" headphone out for quiet practice applications, and an effects loop so you can add other effects after the eq section. there are multiple outputs so you can simultaneously send the signal to a foh pa system and amplifier. runs off battery or 9v adapter.
Specifications:
Frequency Response | 19 Hz – 21 kHz |
NRR | 22 dB |
Input Impedance | 16 Ω |
Dimensions | 2.35" H x 6.5" W x 7.5" L |
Weight | 1.46 lbs |
Reviews:
I'm soon going to post a youtube review about the pedal. As you can see from the pic I have some of the pedals the Xtomp models. Xotic bb-preamp, rc booster, Super overdrive, and a few more out of site. I A/B tested them and in some cases the 2 were undistinguishable. Generally the difference are in the output level, noise level, 1 case a slight difference in the mids, but they captured the essence of the pedals they modelled very well. What the Xtomp gives you is the ability to have many different sounds at your fingertips. A variety of booster, overdrives, distortions, that all sounds very different from each other. You can stack pedals in front of it and behind it very well. This is a 5 star pedaldscataglini
The effects and amp models are realistic. The sound is great. It stacks super well, I use an overdrive in front of it, makes the amp models come to life. Sound good either way! You can get cab sims on most amp models on the stereo unit by using the right (bottom) in.output jacks. I need more, because the sounds are awesome. Responsive. Hotone's modelling system is the best I've ever heard. The price, service, and speedy delivery were also great! Sam Ash is a great store, always high quality instruments, effects, and amplifiers!Shawnoh
I bought this to explore new sounds without the individual cost of buying unique pedals. Once I found what I was looking for I went out and got those to build my chain, The unit sounds great and could absolutely be used as a permanent part of your board if you choose. Love the way the knobs change color to reflect whats loaded and which control is available. The software is super easy to use.Justin
16. Graph Tech Pe-0340-00 Ghost Acousti-Phonic Preamp Kit For Bass – Basic
Product Details:
It includes all the basic components you need (except pickups) that you will need to add realistic acoustic tone to your electric bass. note: some instruments may require modifications to accommodate piezo wires. overview specs instructions overview specs includes 1/4" output jack, battery clip and all wiring harness needed for installation. if you want all the optional switches and pots, choose our pk-0340-00. does not include saddles.
Specifications:
Finish | Standard |
Year | 2010s |
Reviews:
THE BEST ACOUSTIC BASS PREAMP!!ebazzrik
17. K&k Sound Pure Preamp, 2014
Product Details:
The pure preamp is our time-tested external preamp, featuring +/-20 db bass, mid, and treble controls plus an internal gain trimmer. this belt clip unit has been specifically designed for the frequencies of the acoustic guitar but it is also great for many other instruments. a special super wide band midrange filter, which is absolutely great in combination with the pure pickups. its simple and noiseless circuit provides unsurpassed clarity and power and the internal gain trimmer allows you to dial in the precise amplification factor needed for your instrument. frequency response is 10-30,000hz. the bass control is set to roll of at 100hz, the midrange at 1.5khz with extra large bandwidth and the treble are set at 10khz. input impedance is 1 meg and the output is low ohmic. battery life is about 180+ hours.
Specifications:
Product Dimensions | 1 x 1 x 1 inches |
Compatible Devices | Guitar |
Voltage | 9 |
Reviews:
The preamp was phasing in and out, the sound was very harsh, the sound engineers ended up disconnecting it and did their own EQ to produce an excellent sound from the k&k pure preamp. An unfortunate experience, I shall be returning it for another, maybe it's just a faulty preamp?Reviewed by Andertons Music Co.
18. Tech 21 Ged-2112 Geddy Lee Signature Sansamp Bass Preamp
Product Details:
Sansamp geddy lee signature 1u rackmount preamp for bass geddy lee has been performing without onstage amps and speakers since the test for echo tour in 1996, favoring major household appliances instead. known for using a variety of gear to create interesting layered tones, geddy has included the sansamp rbi and/or the sansamp rpm in his rig since 2001. wanting to streamline and simplify his gear for new projects, geddy partnered with tech 21 to design a signature sansamp, the ged-2112. this challenging collaboration involved distilling a rackload of equipment into a single rackspace. it resulted in a new format for parallel pre-amping — having two separate internal pre-amps that run in parallel. the drive pre-amp section is based upon the versatile sansamp rpm, for a wide range of sonic possibilities. the deep pre-amp section offers low end boost for thick, meaty tones. saturation goes from clean in lower settings to increased harmonics and tube-like compression in higher settings. to keep things lean and efficient, the eq curve is pre-set to geddy's personal specs. you can use either section independently or blend them externally direct to a mixing board as well as to two amplifiers.
Specifications:
Frequency Range | 170 Hz to 3.0 kHz |
Sensitivity | 20dB |
Recommended Age Group | Adult |
Gender | Men |
Reviews:
You can get any tone! Love, love love it!p_n_b2005
Great preamp that is definitely not a one trick pony. Many different routing options which can easily meet individual players requirements. Deep channel sounds similar to a clean Ampeg SVT. The drive channel reminds me of a dirtier ampeg tone similar to the V4B. Unaffected out allows routing to onstage amps or pedalboards for more tonal options. Can be the center piece of rig or an additional component to an existing rig. The GED2112 can be perfect for project studio applications as well.martinguyom21
Great sounding DI- awesome heavy sounds and easy studio interaction.myqqy777
19. Tech 21 Sansamp Rbi Bass Preamp
Product Details:
The tech 21 sansamp rbi rackmount bass tube amp emulator puts all of the preamp tone-shaping and fattening control of the popular sansamp bass driver di in a single rackspace and adds a host of new features: a dedicated mid control; individual level control for the xlr out to optimize your amp's output relative to the pa; effects loop; mix 50/50 switch; 2 xlr outputs, one with level selection and a buffered unaffected xlr for running a dry signal to another channel. it also has 2 footswitch inputs: on/off and an output for chaining and toggling between 2 sansamps.puts all of its predecessor's preamp tone-shaping and fattening control in a single rackspace – dedicated mid control – individual level control for the xlr out to optimize your amp's output relative to the paan effects loop – mix 50/50 switch2 xlr outputs, one with level selection and a buffered unaffected xlr for running a dry signal to another channel2 footswitch inputs: on/off and an output for chaining and toggling between 2 sans – amps
Specifications:
Input impedance-input 1 | 1M Ohm |
Input impedance-input 2 | 1M Ohm |
Output impedance-1/4-inch | 1K Ohm min |
Output impedance-XLR | 600 Ohm min |
Input level-input 1 | 1V RMS max |
Input level-input 2 | 1V RMS or 10V max, with -20dB pad engaged |
Output level-XLR | Switchable to -20dB or 0dB range |
Maximum output level | +10dB or better |
Effects loop send | 1K Ohm min, -20dB |
Low-frequency response | 10Hz or better |
High-frequency response | Harmonic content, 20kHz or better |
Maximum power consumption | 5 watts |
AC input power (factory set) | 100V, 117V, 230V, 240V |
Enclosure | Aluminum and steel, fully shielded |
Dimensions | 19.0 x 1.75 x 5.25 inches |
Overall depth | 6.25 inches |
Reviews:
Amazing bass Pre, well made and sounds great instantly
thanks for a great deal!geddyyz
Using the settings in the back as a starting point, I was able to quickly and easily dial in my bass sound. In addition, my bass sound is now stronger, punchier and carries more weight than ever before. This unit is something I have been dreaming about for 18 years, and it did not disappoint.StevenTriP
20. Dilwe 3 Band Active Bass Guitar Eq Equalizer Preamp Circuit Pickup Bass Tone Control With Fittings
Product Details:
Better design: dual potentiometers design, easily decrease the noise and amplify the sound of bass. excellent performance: balance volume for bass pickup, provide better control of tone with high quality signal. convenient suit: full accessories for easy installation, practical and convenient to operate. wide application: suitable for most of guitar bass, an ideal replacement for bass lovers. features: br 1. better design: dual potentiometers design, easily decrease the noise and amplify the sound of bass. br 2. excellent performance: balance volume for bass pickup, provide better control of tone with high quality signal. br 3. convenient suit: full accessories for easy installation, practical and convenient to operate. br 4. wide application: suitable for most of guitar bass, an ideal replacement for bass lovers. br 5.
Specifications:
Item Package Dimensions L x W x H | 5 x 3.5 x 1.42 inches |
Related posts:
- Best Preamp For Bass Guitar (2024 Update)
- Bass Guitar Pre Amp For Sale (2024 Update)
- Bass Guitar Octave Pedal For Sale (2024 Update)
- Best Guitar Tube Preamp (2024 Update)
- Best Preamp For Guitar (2024 Update)
- Programmable Guitar Pedal Switcher For Sale (2024 Update)
- Best Preamp For Acoustic Guitar (2024 Update)
- Pre Amp Acoustic Guitar For Sale (2024 Update)
- Acoustic Guitar Pre Amp For Sale (2024 Update)
- Best Preamp For Electric Guitar (2024 Update)