Are you looking for the Baritone Guitar Neck Length? If so, you’ve come to the right place.
Choosing the Baritone Guitar Neck Length can be difficult as there are so many considerations. We have done a lot of research to find the top 20 Baritone Guitar Neck Length available.
The average cost is $475.54. Sold comparable range in price from a low of $62.00 to a high of $1299.00.
Based on the research we did, we think Fender Baritone Sub-Sonic Stratocaster Neck is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Baritone Guitar Neck Length (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
$299.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- Neck: maple
- Fingerboard: maple
- Number of frets: 22
Reviewers Noted:
Attractive . Good sound quality . Well made . Durable . Weight
Features:
- Mahogany body with beveled maple top and flame maple veneer
- Wide fat maple neck and 27.7 scale length
- 85/15 s pickups
$299.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfort
Features:
- Neck: maple
- Fingerboard: pau ferro
- Number of frets: 22
$299.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- Neck: maple
- Fingerboard: pau ferro
- Number of frets: 22
$299.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- Fender original
- Made in the usa
- Package dimensions: 90 x 10 x 6 cm
$654.00
4.8
Reviewers Noted:
Durability . Visual appeal . Weight
Features:
- Nyatoh body w/ black color
- Emg 81 bridge & emg 60 neck pickups
- Gibraltar standard ii bridge & gotoh mg-t locking tuners
$869.98
4.8
Reviewers Noted:
Sound quality . Visual appeal . Craftsmanship
Features:
- Gloss-finish solid korina body
- Dual railhammer chisel pickups, bass contour knob, 3-way pickup select
- Tune-o-matic bridge with stopbar tailpiece, reverend pin-lock tuners
$1299.00
5.0
Reviewers Noted:
Durability . Sound quality . Visual appeal
Features:
- 0.110"w x 0.050"h truss rod: single action.
- Headstock access tuners: reverend pin-lock nut: 43mm width.
- Boneite controls: volume, tone (pull neck+bridge on) 5-way strings: sit custom 11.
Reviewers Noted:
Durability . Sound quality . Visual appeal . Weight . Craftsmanship
Features:
- Colour dark aqua
- Body single cut body shape
- Headstock 'dolphin' headstock
$629.99
4.0
Reviewers Noted:
Visual appeal
Features:
- New for 2020!!!
- A bartione acoustic that allows deep, lush strumming!
$109.99
Features:
- This solo guitar neck is intended as a replacement or diy project. neck specifications may have a +/- 1 or 2mm variance. if using this neck with a non solo…
$62.00
Features:
- 1pcs electric baritone guitar neck 27 inch scale length neck wood:canada hard maple fretboard wood: rosewood finish: unfinished inlay: no inlaid side dots: left side dots 27 inch if you…
$529.00
5.0
Features:
- Body shape:baritonetop wood (solid):sitka spruceback & sides:mahogany laminate
- Neck material:mahoganyneck finish:glossneck joint:dovetailfretboard:rosewoodfretboard inlay:pearl dot#of frets:20fret size:mediumnut width:48mm/1 7/8"
- Sitka spruce
$79.00
Features:
- Store categories store categories electric violin #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 #24…
$849.99
4.0
Features:
- Bound satin-finish maple-top on mahogany body
- 27" baritone-scale neck-through mahogany with 24-fret pau ferro fretboard
- Emg 85/81 pickups with 3-way toggle switch
$855.00
Features:
- The newest aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. designed to work with lower…
$855.00
Features:
- The newest aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. designed to work with lower…
$65.70
Features:
- Description neck wood: mahogany fretboard wood: rosewood finish: unfinished inlay: no inlaid scale length:27". if you need other scale length please contact me. tuner hole size: about 11/32 mm" width…
$62.10
Features:
- Description 1pcs electric 6 string guitar neck baritone style necks neck wood: maple fretboard wood: rosewood finish: unfinished inlay: not inlaid side dots: left side dots scale length: 30 inch…
Features:
- 1. this guitar neck is compatible for fender st-style electric guitar neck replacement.
- 2. high-quality maple neck, delicate and unique.
- 3. fingerboard with 22 frets, smooth and high density.
1. Fender Baritone Sub-Sonic Stratocaster Neck
Product Details:
Crafted at our ensenada, mexico, manufacturing facility, this genuine fender baritone sub-sonic stratocaster guitar neck will convert your standard scale length guitar into a 27.5 scale length baritone! features a comfortable "modern c" profile and 9.5"-radius maple fingerboard with 22 medium jumbo frets. the nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. your local fmic authorized service center can install genuine replacement necks.
Specifications:
| Neck Material | Maple |
| Neck Shape | “C” Shape |
| Neck Finish | Gloss Urethane |
| Radius | 9.5” (241 mm) |
| Scale Length | 27” (686 mm) |
| Number of Frets | 22 |
| Fret Size | Medium Jumbo |
| Position Inlays | Black Dot on Maple and White Dot on Pau Ferro |
| Nut Material | Plastic |
| Nut Width | 1.650” (42 mm) |
| Truss Rod | Standard |
| Truss Rod Nut | 3/16” Hex at Headstock |
| Tuner Mounting | Dual Guide Pin |
| Headstock Thickness | .540” (13.71 mm) |
| Neck Mounting | 4-Bolt |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
2. Prs 277 Se Baritone Charcoal Burst
Product Details:
A booming baritone. the prs se 277 baritone is a powerful guitar with a deep, delicious tone. naturally tuned lower thanks to the extended scale length, you'll love how it makes lower tunings sound tight, punchy, and powerful. the pair of 85/15 's' humbuckers give you a dynamic, articulate, well rounded voice to work with, and will turbocharge your riffs. whether you're chugging, strumming, or playing lead, you can be sure that you'll always be heard. it plays beautifully too. boasting a wide fat maple neck, it has a satisfying feel, and you'll find fretting to be a breeze. the rosewood fingerboard also offers tonnes of playing satisfaction, as well as strong sustain and superb smoothness. you'll feel completely free to express yourself with these exceptional tools at your disposal. if you want an instrument which will shake the ground with its roaring tone – this is it.
Specifications:
| Body shape | Double cutaway |
| Body type | Solid body |
| Top wood | Maple |
| Body wood | Mahogany |
| Body finish | Gloss |
| Orientation | Right handed |
| Neck shape | Wide Fat |
| Neck wood | Maple |
| Joint | Set-in |
| Scale length | 27.7 in. |
| Truss rod | Standard |
| Neck finish | Gloss |
| Radius | 10 in. |
| Fret size | Medium |
| Number of frets | 22 |
| Inlays | Birds |
| Nut width | 1.687 in. (42.8 mm) |
| Configuration | HH |
| Neck | Tone Furnace |
| Bridge | Tone Furnace |
| Active or passive pickups | Passive |
| Series or parallel | Series |
| Piezo | No |
| Active EQ | No |
| Control layout | Master volume, tone |
| Pickup switch | 3-way |
| Coil tap or split | No |
| Kill switch | No |
| Bridge type | Fixed |
| Bridge design | 6-saddle string through body |
| Tuning machines | PRS designed |
| Number of strings | 6-string |
| Country of origin | South Korea |
Reviews:
So I hesitated on buying this Guitar because I just didnt care for the finish. Well It looks nothing like the pictures. Beautiful 3D flames in the top.Am Very pleased. So that brings me to what I expected from a PRS and didnt get, a playable set up. I know its an SE but the action shouldnt be 6mm at the 22nd fret. How QC at the factory allowed it to leave puzzles me. The pick ups are good for Drop C but even at B standard get really muddy on the lower strings. I put in a Nazgoul, Sentient set and these in another standard guitar. They sound really nice in standard E to drop C. IMOTwayne72
I have used this guitar with my band, live and in rehearsals… Plays fantastically once I set it up to my desired specs (Std D tuning, 10-52 strings, FU Tone brass block), but these PRS stock pickups have no grunt and snarl to them, so I plan to add an SD Black Winter set like in my EC Black Metal FR (dropped C). I have reverted back to using my Kramer Assault Plus which came loaded with the SD Alternative 8 set. Will likely use Custom 24 as primary D guitar again after replacing pickups. For this pickup issue alone, I'm giving it 3 stars, otherwise, it would be 5, as spending over 200 bucks more is a bit off putting after spending over $1100 for this plus a hard shell case for an import.Steve
Absolutely love this guitar! As with all SE Custom 24 models, the feel and balance on the strap and also on the knee are prerfect. The action is fast and smooth, and the whole guitar just oozes quality. The roasted maple board is a really nice variation from the mahogany or ebony boards, which are usually found on Custom 24 models. This particular guitar has the most amazing and deepest "3-D" effect quilted maple veneer that I've ever seen on a SE series model. I believe that PRS would probably rate this as a 4A (AAAA). The sound is as good as you'll get from stock pups in a sub- 1000 guitar and the way that PRS wire the coil tap gives a convincing single-coil tone. What upgrades would make this even better? Probably locking tuners, and maybe a satin neck. After- market pickups, if you want to change the tone.kentishkeith
3. Fender Sub-Sonic Baritone Tele Neck Pau Ferro
Product Details:
Features a comfortable "modern c" profile and 9.5"-radius pau ferro fingerboard with 22 medium jumbo frets. the nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. your local fmic authorized service center can install genuine replacement necks.
Specifications:
| Neck Material | Maple |
| Neck Shape | “C” Shape |
| Neck Finish | Gloss Urethane |
| Radius | 9.5” (241 mm) |
| Scale Length | 27” (686 mm) |
| Number of Frets | 22 |
| Fret Size | Medium Jumbo |
| Position Inlays | Black Dot on Maple and White Dot on Pau Ferro |
| Nut Material | Plastic |
| Nut Width | 1.650” (42 mm) |
| Truss Rod | Standard |
| Truss Rod Nut | 3/16” Hex at Headstock |
| Tuner Mounting | Dual Guide Pin |
| Headstock Thickness | .540” (13.71 mm) |
| Neck Mounting | 4-Bolt |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
4. Fender Sub-Sonic Baritone Stratocaster Neck Pau Ferro
Product Details:
Crafted at our ensenada mexico manufacturing facility this genuine fender baritone subsonic stratocaster guitar neck will convert your standard scale length guitar into a 27 scale length baritone! features a comfortable modern c profile and 9.5 radius pau ferro fingerboard with 22 medium jumbo frets. the nut is preslotted with pilot string location grooves to make spacing a breeze when performing the final string slot filing and a satin finish on the back offers smooth playability. this replacement neck is for a fender or squier by fender guitar.
Specifications:
| Neck Shape | “C” Shape |
| Neck Finish | Gloss Urethane |
| Radius | 9.5” (241 mm) |
| Scale Length | 27” (686 mm) |
| Number of Frets | 22 |
| Fret Size | Medium Jumbo |
| Position Inlays | Black Dot on Maple and White Dot on Pau Ferro |
| Nut Material | Plastic |
| Nut Width | 1.650” (42 mm) |
| Truss Rod | Standard |
| Truss Rod Nut | 3/16” Hex at Headstock |
| Tuner Mounting | Dual Guide Pin |
| Headstock Thickness | .540” (13.71 mm) |
| Neck Mounting | 4-Bolt |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
5. Fender Baritone Sub-Sonic Telecaster Neck – Maple
Product Details:
Ideal for b to b tuning. features a comfortable modern c profile and 9.5-radius fingerboard with 22 medium jumbo frets. the nut is pre-slotted with pilot string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
| Neck Material | Maple |
| Neck Shape | “C” Shape |
| Neck Finish | Gloss Urethane |
| Radius | 9.5” (241 mm) |
| Scale Length | 27” (686 mm) |
| Number of Frets | 22 |
| Fret Size | Medium Jumbo |
| Position Inlays | Black Dot on Maple and White Dot on Pau Ferro |
| Nut Material | Plastic |
| Nut Width | 1.650” (42 mm) |
| Truss Rod | Standard |
| Truss Rod Nut | 3/16” Hex at Headstock |
| Tuner Mounting | Dual Guide Pin |
| Headstock Thickness | .540” (13.71 mm) |
| Neck Mounting | 4-Bolt |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
6. Ibanez Iron Label Rgib21 – Black Guitar
Product Details:
The striking baritone 6-string rgib21 brings an air of mystery to the iron label line. the rgib21 baritone guitar features a 28” scale which provides full, rich tone and solid intonation. the combination of the jatoba fingerboard and nitro baritone neck provides a smooth, dense playing surface that produces a tight low end with quick response. luminescent side dot inlays will light your way on the darkest stages. electronics include the emg 60 pickup for a classic thick, buttery tone, and the searing high end of an emg 81 provides endless sustain and superior articulation. the gibraltar standard ii bridge meshes with the guitar’s body to provide the optimal transfer of each string’s vibration. gotoh locking tuners provide amazing tuning accuracy and allow for quick, efficient string changing. factory tuning is b, f#, d, a, e, b with string gauges .14 to .68. with the growing popularity of the iron label series, ibanez continues to tap into the molten metal underworld for inspiration. re-working its famous rg body shape from the chassis on up, the rgib21 has been designed to add some dark, dramatic flair to the brand’s no-frills “made-for-metal” lineup.
Specifications:
| Handedness | Right-Handed |
| Body Type | Solidbody |
| Neck Construction | Bolt-On |
| Neck Type | Nitro Baritone/3pc Maple/Purpleheart neck |
| Top/back/body | Nyatoh body |
| Fretboard | Jatoba fretboard/Off-set white dot inlay |
| Fret | Jumbo frets |
| Number of Frets | 24 |
| Bridge | Gibraltar Standard II bridge |
| String Space | 10.8mm (0.43") |
| Neck Pickup | EMG 60 (H) neck pickup (Active/Ceramic) |
| Bridge Pickup | EMG 81 (H) bridge pickup (Active/Ceramic) |
| Factory Tuning | 1B,2F#,3D,4A,5E,6B |
| String Gauge | .014/.018/.026/.044/.056/.068 |
| Hardware Color | Black |
| Neck Scale | 712mm (28.03") |
| Neck Width at NUT | 45mm (1.77") |
| Neck Width at 24F | 58mm (2.28") |
| Neck Thickness at 1F | 20mm (0.79") |
| Neck Thickness at 12F | 23mm (0.91") |
| Neck Radius | 400mmR |
Reviews:
Never having owned an Ibanez before, I decided to opt for something new. Great choice. This is a guitar designed to be played. The neck and action are wonderful. The best word I can think of for this guitar is "lean." It has everything I need and no frills that get in the way. The two pickups, with a single selector switch and volume control are all I need. At first I was worried about the lack of fret inlays, but the dots on the side of the fret board are sufficient. Beautiful design, and a pleasure to play. Oh, almost forgot to mention that it looks awesome.cjskama
Ibanez is a name well known for quality guitars. Even the super affordable line of Gio's are awesome guitars for the price. The overall quality of this baritone Ibanez was excellent and the factory setup was on point and ready to tune and play. This is the third Ibanez I've bought from Proaudiostar and 5th overall purchase from them and they've delivered free and on time and everything was in perfect order. This time was no different and the guitar came well packed and in perfect condition.LongQuail-46485
Handles drop F as well as, if not better than, my M80M Meshuggah signature. Swapped the EMG's out for a Nazgul/Jazz combo and modified the killswitch to be a coil split instead. Also added push-pull pot on the volume knob for out-of-phase. This guitar is excellent, especially for the price.peelskiwis
7. Reverend Descent Ra Baritone Midnight Black
Product Details:
Get ready to throw down with this one – way down. an all-new baritone design with a 26-3/4′′ scale neck that's long enough to deliver thunderous lows, yet short enough to play like a normal guitar. the best of both worlds! strategically positioned railhammer chisel pickups keep the tone tight, and our custom sit 12-68 gauge string set (available separately) features a plain 3rd for easy bending. feeling the itch for that baritone growl, but don't want to feel like you're playing a bass? then the descent ra is your ticket.
Specifications:
| Body shape | Double cutaway |
| Body type | Solid body |
| Body wood | Korina |
| Body finish | Gloss |
| Orientation | Right handed |
| Neck shape | Oval medium |
| Neck wood | Roasted Maple |
| Joint | Bolt-on 6-bolt neckplate |
| Scale length | 26.75 in. |
| Truss rod | Dual-action |
| Neck finish | Gloss |
| Radius | 12 in. |
| Fret size | Medium jumbo |
| Number of frets | 22 |
| Inlays | Dot |
| Nut width | 1.69 in. (43 mm) Synthetic Bone |
| Configuration | HH |
| Neck | Chisel |
| Bridge | Chisel |
| Active or passive pickups | Passive |
| Series or parallel | Parallel |
| Piezo | No |
| Active EQ | No |
| Special electronics | Bass contour |
| Control layout | Master volume, tone, bass contour |
| Pickup switch | 3-way |
| Coil tap or split | No |
| Kill switch | No |
| Bridge type | Fixed |
| Bridge design | Tune-o-matic |
| Tailpiece | Stopba |
| Tuning machines | Pin-Lock |
| Number of strings | 6-string Baritone |
| Country of origin | South Korea |
Reviews:
magnificent Guitar! Huge clear sound, full deep amazing baritone sound with clear soaring highs. best tremolo system iv'e ever used with the locking pegs so there's no "redundant" locking nut, so no slippage with tremolo. all easy to play, very smooth. brought out some great playing with "new" baritone range and sound plus more " familiar tremolo capabilities enabling a vast range of soundsJoel M
extremely TBE. absolutely TBEjustin p.
8. Reverend Pete Anderson Eastsider Baritone Guitar – Satin Black
Product Details:
Reverend pete anderson eastsider baritone award-winning country/rock-roots guitarist pete anderson has teamed up with reverend to create the eastsider baritone. pete was looking for a baritone that had a retro feel, delivering the deepest possible twangy tone. the tone is achieved with its talnico (bridge)/salnico (middle/neck) pickup combination, with a push/pull phase switch for exploring even more tone possibilities. it features a chambered korina body with a roasted maple neck and comfortable medium oval profile. it also features a 28-5/8" scale length, wilkinson wv6 sb tremolo for extra twang, adjustable arm tension, and modified mounting holes for improved stability. reach new heights with the eastsider baritone, whether you're into surf, western, or deep country. features &am…
Specifications:
| Number of Strings | 6 |
| Left-/Right-handed | Right-handed |
| Body Type | Solidbody, chambered |
| Body Shape | Pete Anderson Eastsider Baritone |
| Body Finish | Satin Polyurethane |
| Neck Material | Roasted Maple |
| Neck Shape | Medium Oval |
| Neck Joint | 6-way Bolt-on |
| Radius | 10"-14" compound |
| Fingerboard Material | Roasted Maple |
| Fingerboard Inlay | Black Dots |
| Number of Frets | 24, Nickel Alloy |
| Scale Length | 28.625" |
| Nut Width | 1.692" |
| Nut Material | Boneite |
| Bridge/Tailpiece | Wilkinson WV6 (STEEL BLOCK Tremolo |
| Tuners | Pin-Lock |
| Neck Pickup | Reverend Salnico Single-coil |
| Middle Pickup | Reverend Salnico Single-coil |
| Bridge Pickup | Reverend Talnico Single-coil |
| Switching | 5-way blade pickup switch |
| Strings | Custom, .0115-.056 |
| Case/Gig Bag | Sold Separately |
Reviews:
One of the best T-style guitars Ive ever owned.maccr-43
It's a keeper. Build and attention to detail is very nice. Nicer than my MIM Fenders. It plays great. Frets are perfect and ends are smooth. I love the compound radius neck and larger frets. And it stays in tune better than any of my other guitars. Set up out of box was perfect. Looks great too. I have to say I am impressed and I am seriously considering what my next Reverend guitar will be. Tone/sound is gritty yet articulate and defined. It's a Tele, but more than a Tele. Pickups are a little hotter with a bit of growl. Definitely not typical vintage Tele style pickups. Cody from Musicians Friend was a really big help in making this purchase and I appreciate him going above and beyond to help.Matt
Great for any gig,big or small! Nice stand by for session work.Big guy
9. Danelectro '56 Baritone Black Guitar
Product Details:
The danelectro '56 baritone electric guitar is tuned down a 4th (b to b) from standard guitar tuning. it features high impedance, high output lipsticks that produce rich, round bass tones unlike anything else using simple a master volume, tone and 3-way switch. with a short scale it's easy to play and comes with 24 frets and a cutaway that lets get all the way to the top. other danelectro accents include a stylized pickguard, "dolphin" head stock design and adjustable bridge. case sold separately.
Specifications:
| Finish | Black |
| Year | 2010 – 2022 |
| Made In | Korea, Republic of |
| Body Shape | Single Cutaway |
| Body Type | Solid Body |
| Bridge/Tailpiece Type | Top-Load |
| Finish Style | Gloss |
| Fretboard Material | Rosewood |
| Neck Construction | Bolt-On |
| Number of Frets | 19 |
| Number of Strings | 6-String |
| Offset Body | No |
| Pickup Configuration | SS |
| Right / Left Handed | Right Handed |
| Wood Top Style | Opaque |
Reviews:
Danelectro has done a good job of constructing an instrument that looks like instruments from the 1950s and 1960s. This instrument may also be a useful addition to a mix with several other instruments. However, it does not work well as a solo instrument. This is what distinguishes it from baritone Danelectros from the 1950s and 1960s and from baritones made by Jerry Jones. Those instruments have an attack and decay profile that is much more subtle, and as a result, they are significantly more versatile. If you want to get an inexpensive instrument that you can use within a mix with several other instruments, the current Danelectro baritone will probably be adequate for your purposes. However, if you want something that can stand on its own, this won't work. To get a better idea of this, compare the sound of the most recent Danelectros with those of 50s and 60s Danelectros or Jerry Jones guitars in videos on youtube or other platforms. Watching these, I had initially thought that the difference might be a matter of the players, but the sound is inherent in the instruments. The current Danelectro baritone also has a problem in that the middle position that combines the pickups is much louder than either pickup alone. My guess is that the pickups are put in series when they should have been put in parallel. By itself, this would not be a make-or-break issue, but the actual sound of the guitar isn't as good or interesting as older Danelectros or Jerry Jones guitars. In summary, this is probably fine as tool to use for special effects. However, it can't carry a song on its own.Ken
I am thrilled with my Danelectro baritone guitar which I bought from Richards Guitars. Service and communication was excellent, and I was kept informed of every detail while awaiting delivery. Really pleased with the setup of the guitar-action, intonation all perfect. I would definitely recommend buying from Richard. A1!Martin M.
10. Alvarez Artist Series Abt60ce Baritone 8-String – Black
Product Details:
After 50 years of making guitars, continual improvement through the use of emerging technologies, processes, and materials is still at the heart of our culture. alvarez guitars are constructed correctly in every sense from raw material preparation to construction and manufacturing processes. our tone woods are carefully cured; our components such as neck blocks and wood joints are carefully designed. the term "solid top" of course refers to the soundboard of an acoustic guitar being made of solid wood, rather than being laminated. however, just because the top is solid, it does not necessarily mean the sound automatically benefits from this feature. the tone of the instrument only improves significantly when the whole guitar is built correctly to optimize the energy a solid soundboard can generate. artist series is built to do exactly this. each model is designed to get the best out of its components, and for them to work together to produce balance, lively projection and great response. these components include a bracing architecture that is specifically designed for each body shape or tonal requirement. our bi-level bridge is designed to heighten string tension and improve sustain and response. real bone nut and saddle, premium tonewoods, and our crafted attenuated finish all further the quality of construction and positively impact the performance of the instrument.
Specifications:
| Top Material | Solid A+ Sitka Spruce |
| Bank and Side Material | Mahogany |
| Back and Sides Finish | Black/Semi Gloss |
| Overall Length | 1065 mm |
| Body Width | 439 mm |
| Body Depth at Heel | 102 mm |
| Body Depth at Baser | 122 mm |
| Bracing System | FSTM – Forward Shifted, Scalloped X |
| Scale | 704 mm |
| Neck Joint | Dovetail |
| Neck Meets Body | 14th Fret |
| No. Frets | 21 |
| Nut Width | 44.45 mm |
| Pickup | Baggs SP |
Reviews:
Lovely guitar. Needs a Gator jumbo case.Cameron
11. Solo St Style 22 Fret Rosewood Baritone Guitar Neck
Product Details:
This solo guitar neck is intended as a replacement or diy project. neck specifications may have a +/- 1 or 2mm variance. if using this neck with a non solo body / solo hardware, slight modifications may be necessary in order to achieve a proper fit. this neck is unfinished and comes pre-sealed with a poly-resin sealer. features maple neck rosewood fretboard 12′′ radius 22 frets 2-way truss rod mop dot inlays & side markers 27" scale length nut width: 1 5/8′′ thickness at nut: 13/16′′ thickness at 12th fret: 15/16′′ width at 12th fret: 2 1/16′′ item shown: solo st style 22 fret rosewood baritone guitar neck model #: sl-stnr22-ba-u upc: 842561010230
12. Baritone Guitar Neck Maple 22 Fret 27inch Rosewood Fretboard Long
Product Details:
1pcs electric baritone guitar neck 27 inch scale length neck wood:canada hard maple fretboard wood: rosewood finish: unfinished inlay: no inlaid side dots: left side dots 27 inch if you need any scale length please contact me. frets: 22 jumbo nickel/silver frets truss rod adjust: at headstock or bottom nut:42mm heel:56mm
13. Teton Stbt100ent Baritone Natural
Product Details:
Sitka spruce is the most well-rounded tone wood and is used on more guitar tops than any other wood. this is due to the tonal qualities and sonic projection of spruce. it has a nice even tone and does not accentuate any frequency above another in an overpowering way. spruce also has a strong attack and does not get muddy at high volumes. this makes it a very versatile wood and makes those players with soft touches sound great and people playing with other instruments cut through the mix. currently, teton guitars only offers the baritone body shape on limited edition guitars. the baritone is identical to the teton jumbo body shape except the baritone has a longer scale length. the fishman isys+ works to complement the natural acoustic tone of your teton guitar when you need to amplify it. this preamp, paired with the fishman sonicore pickup, will reproduce all the natural …
Specifications:
| Finish | Natural |
| Made In | China |
Reviews:
For the price, there is not another baritone with this depth and playability.jjoshinsky
14. Baritone Guitar Neck 24fret 27inch Maple Rosewood Fretboard Long Scale
Product Details:
Store categories store categories electric violin #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 #24 guitar neck 24.75 inch guitar neck 25.5 inch guitar neck lele guitar neck jackson guitar neck 24.75 & 25.5 guitar neck paddle neck banana guitar neck electric guitar neck electric guitar body electric guitar neck/body accessories/parts guitar accessories guitar nut guitar bridge guitar tailpiece knobs fretboard tuner keys plate switch corver jack guitar pickguards fret wire sound hole inlay inlay wood connection cable guitar binding violin bow wholesale bow violin bow viola bow carbon fiber violin bow snakewood violin bow bone frog violin bow brazil wood violin bow carbon fiber cello bow snakewood cello bow brazil wood cello bow carbon fiber bass bow brazil wood bass bow snakewood bass bow bone frog cello bow tools case/bag violin case viola case cello case bass case other case bow case clarinet guitar case & bag electric cello #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14
15. Esp Ltd Mh-400b Baritone Electric Guitar Black Satin
Product Details:
The esp ltd mh-400b in black satin is a high-performance baritone guitar built for low-range and powerful sounds. it is part of the ltd 400 series; aimed at professional performing and recording musicians but not at the expense of out-pricing the average guitarist. it has specifications geared towards effortless performance and powerful tones. the mahogany body delivers a thick tonality with a maple cap adding complex overtones to help bring out the nuances in your playing. the fast-playing neck has 24 extra jumbo frets, a flat 350mm radius, a thin "u" profile and a strikingly smooth neck-through design. along with the contoured double cutaway body, these specs provide easy access to all 24 frets for both riffing and high end soloing. elsewhere, emg 81 active pickups provide the power and articulation required for low tuned riffs with clarity. locking tuners and a string thru bridge add the finishing touches, delivering enhanced tuning stability for a rock-solid performance. the mh-400b baritone is a focused instrument that is the ideal tool for the modern guitarist. with its sleek satin black finish, it's no-nonsense aesthetic will give your audience no illusions as to what sort of sounds you'll be creating with this guitar.
Specifications:
| Body shape | Double cutaway |
| Body type | Solid body |
| Top wood | Bound Maple |
| Body wood | Mahogany |
| Body finish | Satin |
| Orientation | Right handed |
| Neck shape | Thin U |
| Neck wood | 3-piece Mahogany |
| Joint | Neck-through |
| Scale length | 27 in. |
| Truss rod | Yes |
| Neck finish | Satin |
| Radius | 13.78 in. (350mm) |
| Fret size | Extra-jumbo |
| Number of frets | 24 |
| Inlays | Small block |
| Nut width | 1.65 in. (42 mm) Molded |
| Configuration | HH |
| Neck | EMG-85 |
| Bridge | EMG-81 |
| Active or passive pickups | Active |
| Series or parallel | Parallel |
| Piezo | No |
| Active EQ | No |
| Control layout | Master volume, tone |
| Pickup switch | 3-way |
| Kill switch | No |
| Bridge type | Fixed |
| Bridge design | Tune-o-matic |
| Tailpiece | String thru body |
| Tuning machines | Grover |
| Number of strings | 6-string |
| Country of origin | Indonesia |
Reviews:
I bought this guitar after having played a friend's older version of this baritone. That guitar was built in Korea back in the day, this model is made in Indonesia. There is nothing fundamentally wrong with this new model, but the older Korean model has noticeably nicer fit and finish. That being said, if you want to play in metal in B standard tuning, I think this is probably the best baritone out there for it at the moment. The 27" scale is about perfect for B standard. A lot of other baritones these days have longer 28- 30" necks, which is better for going lower, but not so much if you just want to play in B. The fret spacing just gets noticeably different at that length. You don't really notice it with 27". EMG's sound great in this.Garrett
16. 27.75" Baritone Guitar Neck #303 Matte Finish, Dot Inlays
Product Details:
The newest aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. designed to work with lower tunings by increasing the scale length of the whole instrument. it is designed to be an aftermarket fit with most stratocasters, telecasters, and jazzmasters. it comes with everything you need to replace your current neck with one from rgi. it will move the scale from a 25.5" to a 27.75", allowing for lower tuning without increasing string gauge. this neck is built and ready to ship today! neck specs: material: 6061 solid billet aluminum scale: 25.5” extended length to 27.75" nut width: 1 11/16” frets: 24 stainless steel medium/medium fretboard radius: 12” tuners: 3+3 sperzel locking nut: 6061 aluminum (cut for heavy gauge strings)(0.013", 0.020", 0.024", 0.035", 0.046", and 0.056") heel pocket: fender strat style (5/8” deep, 2.18” heel width, 3” total length, 5” radius heel curve) thickness: .700” at nut, .725” at 7th fret, .740” at 12th fret .760” at 15th fret neck shape: very flat u shape, maximum thinness without structural loss, no tapered heel includes: 4 stainless steel 1 1/2 “ 10-24 mounting bolts, backplate, buffing compound, and 2 microfibre cloths
Specifications:
| Weight | 6 lb |
17. 27.75" Baritone Guitar Neck #298 Matte Finish, No Inlays
Product Details:
The newest aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. designed to work with lower tunings by increasing the scale length of the whole instrument. it is designed to be an aftermarket fit with most stratocasters, telecasters, and jazzmasters. it comes with everything you need to replace your current neck with one from rgi. it will move the scale from a 25.5" to a 27.75", allowing for lower tuning without increasing string gauge. this neck is built and ready to ship today! neck specs: material: 6061 solid billet aluminum scale: 25.5” extended length to 27.75" nut width: 1 11/16” frets: 24 stainless steel medium/medium fretboard radius: 12” tuners: 3+3 sperzel locking nut: 6061 aluminum (cut for heavy gauge strings)(0.013", 0.020", 0.024", 0.035", 0.046", and 0.056") heel pocket: fender strat style (5/8” deep, 2.18” heel width, 3” total length, 5” radius heel curve) thickness: .700” at nut, .725” at 7th fret, .740” at 12th fret .760” at 15th fret neck shape: very flat u shape, maximum thinness without structural loss, no tapered heel includes: 4 stainless steel 1 1/2 “ 10-24 mounting bolts, backplate, buffing compound, and 2 microfibre cloths
Specifications:
| Weight | 6 lb |
18. Baritone Guitar Neck 24fret 27inch Mahogany Rosewood Fretboard
Product Details:
Description neck wood: mahogany fretboard wood: rosewood finish: unfinished inlay: no inlaid scale length:27". if you need other scale length please contact me. tuner hole size: about 11/32 mm" width at heel: about 56+-0.5mm frets: 24 nickel/silver frets truss rod adjust: at headstock or bottom payment we appreciate quick payment and look forward to helping you with your musical instrument needs in the future. payment method: accept the following forms of payment via our secure system: paypal (visa, master, american express, discover, debit, and bank transfer) credit / west union credit / west union: please contact us if you like the in this way to pay. we recommend you by the paypal. checkout: after winning an item in an auction or a "buy it now" purchase, click on the checkout now button to immediately proceed with the checkout and payment process. you will be directed to our third party checkout system. delivery details return for refund: if you are not completely satisfied with your purc
19. Baritone Guitar Neck 24fret 30inch Maple Rosewood Fretboard Long Scale
Product Details:
Description 1pcs electric 6 string guitar neck baritone style necks neck wood: maple fretboard wood: rosewood finish: unfinished inlay: not inlaid side dots: left side dots scale length: 30 inch frets: 24jumbo nickel/silver frets truss rod adjust: at headstock or bottom nut width:42mm heel width:56mm+-0.5 payment we appreciate quick payment and look forward to helping you with your musical instrument needs in the future. payment method: accept the following forms of payment via our secure system: paypal (visa, master, american express, discover, debit, and bank transfer) credit / west union credit / west union: please contact us if you like the in this way to pay. we recommend you by the paypal. checkout: after winning an item in an auction or a "buy it now" purchase, click on the checkout now button to immediately proceed with the checkout and payment process. you will be directed to our third party checkout system. delivery details return for refund: if
20. Boxwizard Electric Guitar Neck 22 Fret Maple Fretboard Guitar Neck For St Style Guitar Diy Parts Replacement
Product Details:
1. this guitar neck is compatible for fender st-style electric guitar neck replacement. 2. high-quality maple neck, delicate and unique. 3. fingerboard with 22 frets, smooth and high density. 4. adjustable truss rod has been installed at the headstock. 5. the hole for the tuning machine is 10mm in diameter. p descriptions: br / frets: 22 frets br / neck: canadian maple neck br / fingerboard: rosewood br / nut: 42mm nut br / back midline: rosewood br / color: matte yellow br / peg holes diameter: 10 mm / 0.4 inch br / neck length: 665mm / 26.18 in br / heel width: 56mm/2.2in br / heel depth: 20mm-26mm(with fingerboard) br / neck weight: 590g/20.8oz – package included: br / 1*guitar neck /p
Specifications:
| Hand Orientation | Right |
| Number of Strings | 6 |
Related posts:
- Length Of Electric Guitar For Sale (2024 Update)
- Electric Guitar Neck Dimensions For Sale (2024 Update)
- Guitar Neck Router Bit For Sale (2024 Update)
- Lemon Oil Guitar Neck For Sale (2024 Update)
- Standard Gauge Electric Guitar Strings For Sale (2024 Update)
- Best Guitar Cable Brands (2024 Update)
- Electric Guitar Sample Pack For Sale (2023 Update)
- Baritone 8 String Guitar For Sale (2024 Update)
- Best Baritone Electric Guitar (2024 Update)
- Best Budget Acoustic Guitar (2024 Update)
