Are you looking for the Acoustic Guitar Electric Conversion Kit? If so, you’ve come to the right place.
Choosing the Acoustic Guitar Electric Conversion Kit can be difficult as there are so many considerations, such as LR Baggs, WD Music, Fishman, Andoer, Stewart-MacDonald, ammoon, Muslady. We have done a lot of research to find the top 20 Acoustic Guitar Electric Conversion Kit available.
The average cost is $108.09. Sold comparable range in price from a low of $11.12 to a high of $409.99.
Based on the research we did, we think LR Baggs Element Active Acoustic Pickup System is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Acoustic Guitar Electric Conversion Kit (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
Reviewers Noted:
Ease of use
Features:
- Soundhole mounted volume control
- Active preamp in the endpin
- Battery clip for a 9v block
Reviewers Noted:
Good sound quality . Easy to install . Ease of use . Visual appeal . Craftsmanship
Features:
- Quick and easy installation
- Includes ibeam placement jig (pin bridge guitars only)
- Peel-and-stick
$12.65
4.3
Reviewers Noted:
Ease of installation
Features:
- The pickup comes standard providing a quick, solder-free installation.suitable for all steel and nylon string guitars.n100 hours continuous use.
- You can expect about 100hours of continuous use between battery changes.nproduce a perfect.
- Can make 12 or 14 small size guitar produce a perfect .ngreat gift for music lovers.
$140.21
4.6
Reviewers Noted:
Instruction quality . Sound quality
Features:
- 3-way switch
- Volume potentiometer and cable
- Stereo output jack
$74.76
5.0
Reviewers Noted:
Sound quality
Features:
- Captures the natural acoustics of your electric guitar
- Warm, full-bodied, and clear amplification
- Automatic mono/stereo switching
$20.75
5.0
Reviewers Noted:
Sound quality
Features:
- Included rod-style piezo transducer pickup, attaches via small jack plug so it can be removed if desired
- Mono 1/4" jack with an automatic "off" circuit that turns the pre-amp off when the cord is unplugged
- Controls for volume, bass, mid-range, treble and pres,built-in battery holder for 9-volt battery (not included)
$409.99
4.8
Reviewers Noted:
Instruction quality . Craftsmanship
Features:
- Divided guitar pickup for use with roland v-guitar system, gr-20 guitar synthesizer, or boss gk effect pedals
- 3-position switching between divided pickup, natural bass pickup, or mix of both
- Mounts on any electric or steel-stringed acoustic guitar
$74.99
4.8
Reviewers Noted:
Easy to use . Compact . Portability
Features:
- Led interface helps keep you notified about the power status
- Mini-usb port allows you to connect compatible devices conveniently
- Single-knob lets you operate this pedal easily
$159.95
5.0
Reviewers Noted:
Ease of use
Features:
- Battery-free preamp/pickup system for guitar
- Lr baggs element undersaddle pickup
- For steel and nylon string guitars, 6 or 12 strings
$12.99
5.0
Reviewers Noted:
Instruction quality . Craftsmanship
Features:
- Great beginner kit for cigar box guitar and other homemade instrument builders
- All of the parts you need to electrify your special build so you can plug it into an amplifier
- Long-shaft neutrik mono jack good for getting through cigar box sides
Features:
- Wireless sound hole pickup system for acoustic guitars with 80mm-120mm hole sound.
- Dual working modes: wireless / wired modes; easy to install, plug and play.
- Dual system pickup: the magnetic force absorbs the vibration of the strings and the microphone absorbs the sound of the guitar.
$27.59
Features:
- 100percent brand new and high quality features all in one kit: the kit includes pickup, equalizer, tuner etc, which is convenient to connect the sound to the guitar speaker amplifier…
$125.00
4.0
Features:
- For western guitars
- Control: volume, panorama, bt-b & bt-b
- Chromatic tuner
$11.12
Features:
- Acoustic guitar pickup system for vt1 tail nail pickup eq diy tuner piezo pickup equalizer system…
$186.07
Features:
- For: acoustic,classical guitardisplay: lcdwith: tuner system…
Features:
- Suitable for for any acoustic guitar that has a sound hole and steel strings.
- Easy-to-use 12 hole magnetic acoustic guitar soundhole pickup is a great music accessory for amplifying your guitar's sound.
- Comes with tone and volume control, also supplied with an amp connection cable and jack.
Features:
- Easy to assemb:pre-wired for easy assembly. features shape control and volume control. connecting wire with 2.5mm plug included.
- Loudness control:eq equalizer piezo pickup features an actual loudness control so that you can precisely determine the site and get the right sound.
- Good accessary:this is essential for your guitar performance. really change the mood and feel of a song or chord.great accessory for acoustic guitars.
Features:
- Premium material : quality abs plastic, electronic part: metal, color: black lines, silver tone.
- Self adhesive : the plastic squares is a self adhesive block to mount the extra wire in your box, without pre amp they will work well.
- Easy to installation : no battery and soldering required, pre-wired piezo mic save time for you, easy to install, convenient to use.
Features:
- For acoustic guitar without existing electronics. a pickup is included for either steel or nylon string guitars adds beautiful effects to your acoustic guitar, no amp required! 8 effects including…
Features:
- Build an acoustic-electric 4-string box guitar! easy to assemble – only basic tools required top panel flips for both left and right handed guitars! 23-inch scale tenor guitar – open…
1. Lr Baggs Element Active Acoustic Pickup System
Product Details:
An undersaddle transducer that fits most common string spacings and saddle widths.the element undersaddle transducer for steel-string guitars is flexible, to contact the bridge and saddle more efficiently. the improved coupling increases sensitivity, for a more lively and open acoustic guitar sound with a delicate high end. it works with most common string spacings and saddle widths, including 3/32" and 1/8", for uniform string-to-string balance. the system features a discrete class-a preamp/endpin jack with pre-contoured eq for plug-and-play convenience, and a soundhole-mounted mini volume control that requires no soldering or drilling. a handy no-drill mesh battery bag is also included. 9-volt battery required.
Specifications:
| Pickup active sensor length | 3.4" |
| Pickup thickness | .038" |
| Pickup width | .092" |
| Battery type | Single 9V |
| Battery life | 1000 hrs. |
Reviews:
Real sound , no Frills just the Guitars original tone .savmandundee
Hands down! The best sound for an acoustic. I was looking for something that I could hear each string with the same balance. And this pickup was perfect! You dont hear more of one string or less of one. Every string has the same volume and tone. And in the clean channel with no eq, it has natural low end!performanceautoglassandtint
This pickup works great. It's easy to install yourself if you're brave. It took me about an hour. I recommend several pieces of tape over the end pin hole before you drill the guitar, this helps prevent chipping the finish, I also recommend access to a good belt sander to get the bridge sanded down just right to compensate for the pickup underneath it. I use this pickup with an LR Baggs ParaDI and I always get a great sound with them.ToddAllenHooper
2. Lr Baggs Ibeam Active Acoustic Guitar Pickup System
Product Details:
The ibeam s mipa award-winning design employs a matched pair of virtually weightless film sensors that flex with the soundboard to trace your guitar s voice much like diaphragms in a stereo mic. a key advantage over typical bridge plate sensors is the ibeam s cardioid like response pattern that inhibits feedback and string squeak while selectively admitting rich tone-producing vibrations. weighing less than 1/3 of an ounce, the pickup will not alter the guitar s natural acoustics and easily mounts to the bridge plate with peel-and-stick adhesive. the ibeam active pairs the ibeam with an all-discrete class a endpin preamp with soundhole volume control. the sweet and ultra-quiet audiophile-grade preamp faithfully amplifies every nuance of the pickup. superior sound and performance is built in for easy plug-and-play performance. an auxiliary passive channel is also available for adding a secondary pickup. the ibeam active is also great for direct studio or home recording. comparison tests have demonstrated that the fidelity of this system is a great alternative to studio microphones.
Specifications:
| Dimensions | 2.875" x .425" |
| Instrument | Acoustic Guitar |
| Position | Bridge Plate |
| Active/Passive | Active (9V battery) |
Reviews:
I have heard no after market pickup that more faithfully reproduces the tone of an acoustic guitar. Easy install, comes with jig and extra adhesive strips in case you (or your friend), oh I don't know, drop your guitar on the concrete floor of a Masaai church in Kenya and have to send your guitar back to the states for repair, but want to put the pickup into a cheap yahama for the time being. Baggs even sent me and extra jig and adhesives, in Kenya, to install it. And it makes the Yamaha sound very good, even though it doesn't even really sound that good acoustically! An amazing pickup that I will use as long as they are still in production! Easy to use, easy to install, virtually indestructible, lightweight and invisible. Outstanding quality and design. I bought mine years ago. The current price is very agreeable and worth every penny if you really care about tone, even if you have a mediocre guitar to install it in!prof69strat
After considerable research I had a Baggs iBeam active installed in my Martin D28 – I'd found the D28 recorded well with a mic, but tended to be boomy when mic'd for live sound reinforcement. An experienced Martin guitar tech installed it for me. I've tried it straight into a mixing board and through a Genz-Benz Shen Pro-LT. It sounds oh so very natural, and gets all the gain I need. It really shines for finger-style. It may not be a good choice in loud environments, as it would probably feedback, but in such situations tonal subtlety is usually less important. It was also important that it was both visually unobtrusive and physically non-invasive. That way it can be replaced – the D28 is likely to outlive the useful life of any pickup system. I am picky about sound quality and am quite happy…price was reasonable too.Return2Normal
Sound: Installed it in a Composite Acoustics Legacy/Dreadnought guitar. The sound is very natural. A lot easier to install. Like one other person said here it is real boomy at your regular settings. I had to back the bass off on my amp. It is real microphone sounding as thats probably what it is. Thus it is feedback prone if you are sitting in front of your speakers. It did well in a solo performance. Not sure how well it will do in a setting where volume is needed. But I would just use a different guitar. I do like it a lot. Features: Has a volume wheel you stick inside the sound hole out of sight. Ease of Use: With the installation jig that comes with it you can position the pickup exactly under the saddle perfectly. I really did not want to get into drilling holes under the saddle for the pickup wires, soldering wires, and sanding down the saddle. Installation is a snap. The Wow Factor: A pretty girl came up and said my guitar sounded real nice.
3. Under Saddle Piezo Pickup Onboard Preamp System For Acoustic Guitar
Product Details:
Meet the needs of acoustic guitars – designed to meet the needs of acoustic guitars. the onboard preamp system features a soundhole mounted preamp with rotary controls for volume and tone. quick, solder-free installation – the pickup comes standard providing a quick, solder-free installation.suitable for all steel and nylon string guitars. 100 hours continuous use – you can expect about 100hours of continuous use between battery changes. produce a perfect bass – can make 12 inch or 14 inch small size guitar produce a perfect bass. great gift for music lovers – perfect for students, advanced players, music lovers, children gift. mouthpiece pickup, sound hole adjustment pickup
Specifications:
| Assembled Product Weight | 0.1 lb |
| Assembled Product Dimensions (L x W x H) | 2.95 x 1.97 x 0.79 Inches |
Reviews:
great you may need something else to stick the battery pouch onto the guitardarthbradd
This is good product and easy installation .pugo86
Intgr dans une guitare de voyage dans un minimum de place c'est parfaitgilgi6453.kn0wlbgcc
4. Graph Tech Acousti-Phonic Kit – Advanced
Product Details:
Get acoustic sounds from your electric – instantly! with the acousti-phonic kit and the right set of graph tech saddles for your guitar (sold separately), you'll be able to take your guitar or bass in a different direction, at just the flip of a switch! or, why not keep the sound of your magnetic pickups going full throttle, then add an acoustic flavor to really shake things up? you can switch between both or use them at the same time. whatever you do, you'll love the way your guitar just got a whole lot more versatile. the acousti-phonic kit is for the adventurous electric guitarist or bassist!
Reviews:
Graphtech has made installation of the preamp kit as easy as possible. Everything came with pin connectors attached to all of the leads and clear instructions. I was using a different output jack than the one that came with the kit, and their instructions covered that change as well. All that was left was connecting the mag pickup volume output to the Acousti-phonic lead and that was that. Just make sure you have room in your control cavity for all of the wires. As you can see in the attached photo. Mine was a tight squeeze.John D.
I rebuilt an Epi Dot installing this system, I run my acoustic sounds out to an acoustic preamp and my electric sounds out to my guitar amp, and it's very very cool. Finally got the guitar sound in my head. If your a strummer like me and an acoustic alone don't do it for you, and neither does an electric, get a semi hollow and install one of these. You'll love it. Put your electric guitar amp on one side of the drums and your acoustic amp on the other and take over the whole rhythm section. Very cool switching between acoustic electric and both. The mid dark switch almost sounds like a phase switch.nobody special
Excellent isn't the word for the ghost system far better. Thanksld212666
5. Graph Tech Ghost Acousti-Phonic Basic Guitar Preamp Kit
Product Details:
The pe-0240-00 is the basic ghost acousti-phonic preamp kit. it includes all the basic components you need (except pickups) that you will need to add realistic acoustic tone to your electric guitar. the acousti-phonic for guitar includes: pd-0240-00 acousti-phonic preamp board eq'd for guitar pd-0103-01 switchcraft stereo switched output jack pe-5003-00 stereo output jack cable assembly pe-5002-00 acoustic volume cable assembly pe-0204-00 battery connecter (connects 9v to preamp) pe-0205-00 battery holder (metal clip that holds 9v battery) pe-5017-00 summing board (not pictured) pe-5021-00 dual connector cable (not pictured) the pe-0240-00 is the basic ghost acousti-phonic preamp kit. it includes all the basic components you need (except pickups) that you will need to add realistic acoustic tone to your electric guitar.
Specifications:
| Finish | Standard |
| Year | 2010s |
Reviews:
This enhances the Graphtech Ghost bridge I installed. Installation was relatively simple since all the wiring is modular and plugs into the pre amp. Minimal soldering was required for the jack and switches. There are a lot of wires so the electronic cavity in my guitar is full but I did not have to enlarge it or modify the cavity.Martin
Absolutely the best acoustic guitar sound from any electric guitar hands down. I've tried and owned aftermarket piezo systems and OEM piezo equipped guitars, the ghost just has that nature sound. It reacts like a "plugged in" acoustic guitar. Soft passages are smooth and even, all the strings have equal output, something the other systems did not have. Step into it and the Ghost just gets dynamic, no piezo "quack" or unnatural thin, sharp distorted tones. Add the fact that string breakage becomes a thing of the past, will pay for its self inside a couple of months. Once you've been able to play a cool acoustic intro, then light into the electric chorus, you'll never go back!Anonymous
6. Kitara Guitar Eq-7545r 4-Band Eq Equalizer System Acoustic Guitar Preamp Piezo Pickup For Cigar Box Guitars Black (Flat)
Product Details:
Studio recording equipment by ascendas. details:this is a pre-amp unit, perfect for mounting directly into the side of your standard acoustic guitar or cigar box guitar. for standard acoustic guitars, this curve pre-amp gives you an on-board equalizer and volume control and helps boost and clarify the signal before it goes to your amplifier. the rod-style piezo can be built to go under the saddle on standard guitars, and can be built into a bridge or placed directly under the bridge for optimal vibrational pickup on cigar box guitars. specifications: flange measurements: 4 1/16" l x 1 3/4" w fits a hole of size: 3 3/4" l x 1 9/16" w presence control: ±12db at 8khz bass control: ±12db at 600hz middle control: ±12db at 600hz treble control: ±12db at 2.2khz input impedance: 10mω frequency response: 20hz – 20khz power: 9v alkaline battery (not included) pickup dimensions: 4 x 1.9 x 2.
Reviews:
I used 5/8 particle board for cbg box. The sound is fantastic, much better than expected.dpap_p_rowaryd
7. Roland Gk-Kit-Gt3 Divided Guitar Pickup Kit
Product Details:
The gk-kit-gt3 from roland is a kit with all of the parts needed to have the gk-3 divided pickup permanently installed on any electric or steel-stringed acoustic guitar. once the kit is in place, your guitar will be fully compatible with the powerful roland v-guitar system, the gr-20 guitar synthesizer, and the boss gk series effect pedals. all of the components, screws, and wires necessary for installation are included in this kit. a 3-position switch is provided that will enable you to switch between the divided pickup sound, the natural pickup sound, or a mixture of both for the ultimate in musical expression.
Specifications:
| Product Dimensions | 5.25 x 1.5 x 3.5 inches |
| Country of Origin | Taiwan |
| Is Discontinued By Manufacturer | No |
Reviews:
I liked the fun of doing the installation myself. Liked the ability to place the controls where I decided on the guitar. I liked that the components were small and easy to fit into the space available inside the guitar. KIt came with an installation instruction that guided me through the installation just fine. No operators manual was provided. I downloaded from Roland the GK-3 (non-kit version) operators manual which should be applicable except for physical appearance. Regular GK-3 comes with a 1 mm gage to help set gap between each pickup and its corresponding string. The Kit did not provide this gage – a minor point. Pickups adjust to match a range of curvatures on the guitar bridge. A 14" radius was the largest. I had a couple of questions as I worked through the installation, and Roland Support provided answers on the phone. So far, so good. Everything seems to work ok. I have played this through a Roland GR-33 synth board for a total of about 1 hour (just finished the installation). What fun! For my project (installed into a Steinberger Synapse Transcale baritone guitar) this was the best value for my money. My Steinberger has a one-piece aluminum bridge, string height is not adjustable except as a group. For different guitars, with different bridge arrangements, you might find other brands of kits might work better for you. The readily available support from Roland was a bonus I had not expected – a big plus.
The external GK pickup looks like a Borg implant, it doesn't exactly complement the appearance of most guitars. This kit puts all of the electronics inside your axe, with just 3 switches on your pick guard. Professional installation is highly recommended. It's an excellent product, but I gave it 4 stars because it should come in white as well as black.
I bought this kit a little while back after trying unsuccessfully to mount an old external GK2 internally (don't ask). The kit was very easy to install, very little space needed internally and the set up was a breeze. I feel it is a little pricey but as kits go it is well put together and well documents. I've had it install for a year or so now. It works flawlessly. If you are tired of the external GK mounted on you guitar this is the way to go!JDX
8. Tc Electronic Bodyrez Acoustic Pickup Enhancer
Product Details:
This is the tc electronic bodyrez acoustic pickup enhancer. it adds a significant amount of bass and "body" resonance to acoustic guitars when they are plugged in with their electric pickups. the challenge with electric-acoustics has always been that you lose a significant amount of bass and resonance when you choose to plug it in versus mic'ing it like you would a standard acoustic guitar setup. this pedal adds back those missing frequencies in the simplest way possible. one knob, tune it to taste and you sound amazing again.
Specifications:
| Port Type | Mini-USB |
| Voltage | 9 V |
| Controller Type | Knob |
| Indicator Type | LED |
| Number of Knobs | One |
Reviews:
Guitars used: A Martin with minimal electronics, the tone does nothing. Another with LR Baggs more of everything. I have an EQ pedal an Compressor on my acoustic board to begin with. I was interested to see if this pedal basically did the same thing. After switching on and off comparisons I ended up keeping the Rez and taking off my EQ pedal. I could not duplicate what the Rez does with my EQ and Comp pedals. I did back my compressor way down to very light. I could have done without it but I like it. The Rez does kill feedback nicely even when I was sitting directly in front of my amp doing the tests. I got feedback with the pedals when pushing the bass and mids trying to match it but none with the Rez. After running through a bunch of my songs I really liked the new sound and picking dynamics. If you are not a pedal person this is the only pedal you will need at gigs and open mics. It does come with a 9v power supply. Nothing for instructions. It has one dial you turn it till you like it.AZ PICKER
I play a Taylor, and even the Expression System can use some help when you are in a live situation, playing through a PA. Many of the other "preamp" type options out there are great, but cost 200 – 300. This box warms up the sound, adds some compression, and just sounds fantastic! Dead simple to use, as it has one adjustment knob. Footswitch turns the unit off/on, but with a hold can mute the signal for guitar changes. Also has the ability to switch the phase in order to get rid of low-end feedback in some situations. Bottom line, the Body Rez is just another example of the innovative folks at TC Electronics. Love this pedal, and it has earned a spot on my pedalboard!Austin Steve
9. Mi-Si Acoustic Trio Endpin Preamp
Product Details:
Simple jack & power charger with l.r. baggs acoustic guitar pickup the mi-si acoustic trio system features an active, battery-free preamp designed specifically to work with the l.r. baggs undersaddle element acoustic guitar pickup. the preamp for this system uses mi-si’s custom piezo linearization scheme, allowing for the most truthful and accurate sound from the pickup. all you have to do is power up for 60 seconds using the mi-si power charger, providing you with up to 16 hours of performance time.
Specifications:
| Pickup System | Piezo |
| Microphone | No |
| Preamp Installation | End Pin |
Reviews:
excellent, product, easy to use, professional classpo*olawai*a
10. Do-It-Yourself Piezo Pickup Kit For Cigar Box Guitars – Includes Piezoelectric Contact Pickups, Volume Potentiometer And Jack
Product Details:
Great beginner kit for cigar box guitar and other homemade instrument builders all of the parts you need to electrify your special build so you can plug it into an amplifier long-shaft neutrik mono jack good for getting through cigar box sides includes detailed how-to instructions and wiring diagram the high-quality parts in this kit have been used by thousands of builders around the world if you have been wanting to try putting a piezo in your builds, but haven't been sure where to start, this is the kit for you! this is a kit of the parts and components you need to add an electric piezo pickup to your cigar box guitar. red 22-gauge hook-up wire; (1) 2ft. black 22-gauge hook-up wire; (1) 2-page how-to sheet
Reviews:
Piezo pickups sound great, really brought the guitar to life. Simple to wire easy to install, very nice kit.hotrod_anthony823
11. Baile Wireless & Wired Acoustic Guitar Pickup System, 80mm-120mm Sound Hole Guitar Pickup Magnetic Force Plus Microphone Double Support Guitar Amp
Product Details:
Pickups & pickup covers by baile. details:double x2 soundhole pickup with microphone receiver 30m wireless transmission for 80-120mm sound-hole acoustic guitar pickup features: wireless sound hole pickup system for acoustic guitars with 80mm-120mm hole sound. dual working modes: wireless / wired modes; easy to install, plug and play. dual system pickup: the magnetic force absorbs the vibration of the strings and the microphone absorbs the sound of the guitar. more longlast work time: built-in rechargeable lithium battery, 8 hours of use time (receiver) after a full charge, and usb charging cable is included. you can enjoy your performance without any worry. strength your stage performence: design for live house, bar and small concert hall. technical specifications: model: x2 color: black transmission range: max.30m power supply: built-in rechargeable lithium battery charging port: micro usb package included: 1 x pick-up 1 x receiver 2 x usb charging cables 1 x mini key 2 x screws 1 x…
Specifications:
12. Doyoung 3 Bands Acoustic Guitar Piezo Pickup Kit Preamp Tuner Piezo Pickup Equalizer System Battery Holder For Case
Product Details:
100percent brand new and high quality features all in one kit: the kit includes pickup, equalizer, tuner etc, which is convenient to connect the sound to the guitar speaker amplifier output. durable: strong and tough plastic housing, you can use it for a long time, not easy to be damaged. used for: 3 band pickup is great for tuning on the move or on-stage. the pickup bar receives the vibration when playing, the equalizer receives, processes and adjusts the audio signal, and the output end is connected to the audio equipment to output the audio. tuner function: the tuner can obtain and determine the vibrational frequency of the sound input to the equalizer. the led display and three signal lights show the accuracy and deviation of the corresponding scale and tone. led dispaly: built-in tuner with led display, bass, middle, treble and control knobs, fit your different needs. specifications: material: abs color: black package weight: approx.175g size: approx.83x59x52mm/3.26×2.32×2.04in note: please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. due to the difference between different monitors, the picture may not reflect the actual color of the item. thank you! package includes 1 set of guitar pickup gender: male.
13. Shadow Sha-Pmg-Wa Panamag Wireless Acoustic Guitar Pickup System
Product Details:
Specifications:
| Finish | Black |
| Year | 2010s |
Reviews:
Neat little device! Stereo pan is awesome! Works very well live with a little setup EQ and switching to nickel wound strings: EJ 21 Jazz Light (12-52 with a wound 24 gauge G) for 6 string and for 12 string I use EXL150 10-46 with a substitiute wound low G and octave A @ 17 or 18 (D'Addario makes'em!) to get a nearly perfect string dB balance, with a little pitching of the pickup. Very cool that it only requires loosening/removing the strings, no other mods at all. I'm using one on a Larrivee D03 and another on a Martin J15-12 when miking is not an option, which is most of my gigs. No wireless latency perceptible and no drop outs so far, but I stand right beside my rack most nights…dr_sociable
14. Acoustic Guitar Pickup System For Vt1 Tail Nail Pickup Eq Diy Tuner Piezo Pickup Equalizer System
Product Details:
15. Freeshipping 6/10set Lc-4 4 Band Acoustic Guitar Pickup Preamp Eq Lcd Tuner System Piezo Pickup Equalizer Acoustic Guitarra Accessory
16. Traderplus 12 Soundhole Guitar Pickup Acoustic Electric Transducer For Acoustic Guitar Magnetic Preamp With Tone And Volume Control
Product Details:
Suitable for for any acoustic guitar that has a sound hole and steel strings. easy-to-use 12 hole magnetic acoustic guitar soundhole pickup is a great music accessory for amplifying your guitar's sound. designed with tone and volume control for more accurate pickup, also supplied with an amp connection cable and jack. produce a clean quality sound and has low feedback. felt backed clip protects the guitar from any scratch or damage. easy install, just plug the pickup into the point and clip the left side of the point, and then use the wrench to tight up right side of the point , connect the wire from the bottom of guitar to an amplifier and speaker. note: because the pickup itself is an external device! in general, the volume is smaller than normal microphones, electric boxes, electric guitars, etc.! this problem is normal. features: – acoustic guitar pickup with 12-hole magnetic transducer, can capture vibrations quickly. – designed with a tone and volume controller for more accurate pickup. – produce a clean quality sound and has low feedback. – padded clip guards against damaging to your guitar. – easy to install, put pickup into sound hole and adjust padded metal piece. – no need to drill hole and no scratch to your guitar. – suitable for 38"-41" guitars with steel strings. – comes with an audio cable (3.5mm to 6.35mm plug) for connecting to guitar speaker. – pickup size: 8.6 x 1.1 x 0.4"; amp cable length: 9.8ft. package contents: 1 * pickup (with volume & tone controller) 1 * audio cable
Specifications:
17. Bnineteenteam 5 Band Guitar Pickup Eq Equalizer Piezo Pickup Acoustic Guitar Preamp With Lcd
Product Details:
5 bands:this pick-up equalizer system with 5 bands can be easily fitted into your acoustic guitar and it is essential to electrify and amplify their sound. easy to assemb:pre-wired for easy assembly. features shape control and volume control. connecting wire with 2.5mm plug included. loudness control:eq equalizer piezo pickup features an actual loudness control so that you can precisely determine the site and get the right sound. good accessary:this is essential for your guitar performance. really change the mood and feel of a song or chord.great accessory for acoustic guitars. quality assurance: our products are guaranteed by quality. features: br br br this pick-up equalizer system with 5 bands can be easily fitted into your acoustic guitar and it is essential to electrify and amplify their sound. it features an actual loudness control so that you can precisely determine the site and get the right sound. this is essential for your guitar performance. really change the mood and feel of a song or chord. pre-wired for easy assembly. features shape control and volume control. connecting wire with 2.5mm plug included. give you a comfortable touch through their unique design. advanced manufacturing process, durable for long time use. br br br specifications: br material: metal + plastic br weight: approx. 182g / 6.4oz br color: black br power: 6f22 9v battery (not included). br bass control: ¡ 12db at 60hz. br middle control: ¡ 12db at 500hz. br treble control: ¡ 12db at 2.2khz. br presence control: ¡ 12db at 8khz. br frequency response: 20hz – 20khz. br input impedance: 10mohm. br tuner size: approx. 9.8 * 4 * 6.1cm / 3.6* 1.6 * 2.4in br power output platform size: approx. 6.5 * 5 * 5.5cm / 2.6 * 2.0 * 2.2in br pickup stick length: approx. 7cm / 2.8in(head), 35cm / 13.8in(wire) br tuner mounting area size: approx. 5.1 * 8.8cm / 2.0 * 3.5in br power output platform mounting area size: approx. 5.2 * 4cm / 2.0 * 1.6in br br package list: br 1* tuner br 1* power output platform br 1* pickup stick br 1* fixed cotton pad br 1* plastic fixation bar br 8 * screw br
Specifications:
| Item Package Dimensions L x W x H | 4.45 x 4.37 x 2.95 inches |
| Item Dimensions LxWxH | 3.86 x 2.28 x 2.4 inches |
18. Pagow 2 Sets Acoustic Guitar Pickup, 3 In 1 Pickups Piezo Transducer, Microphone Contact Self-Adhesive Mono Piezo Pickup With Buzzer For Electronic
Product Details:
Pickups & pickup covers by pagow. details:pagow 3 in 1 pickups piezo transducer * 3 in 1 transducer pickup system fit for most string music instruments. * upright bass, banjo, violin, ukulele, viola, cello, mandolin, resonator guitar,etc. material : quality abs plastic, electronic part: metal, color: black lines, silver tone. package contents: 2 sets self adhesive : the plastic squares is a self adhesive block to mount the extra wire in your box, without pre amp they will work well. installation : no battery and soldering required, pre-wired piezo mic save time for you, easy to install, convenient to use.
Specifications:
| Package Dimensions | 9.33 x 4.57 x 0.63 inches |
| Color Name | 2 sets |
19. Tonewoodamp Solo + Pickup Bundle For Non-Electric Guitars (Includes A Pickup) (Right Handed, Steel String)
Product Details:
For acoustic guitar without existing electronics. a pickup is included for either steel or nylon string guitars adds beautiful effects to your acoustic guitar, no amp required! 8 effects including reverbs, delays, tremolo, autowah, and more! easy and quick install, no tools required! magnetically attaches and detaches. one of a kind experience, and the tonewoodamp works on virtually any acoustic guitar! includes an accessory pickup for non-electric acoustic guitars!
20. The"tupelo Tenor" 4-String Electric Box Guitar Kit – Easy To Build, Great Acoustic Tone
Product Details:
Build an acoustic-electric 4-string box guitar! easy to assemble – only basic tools required top panel flips for both left and right handed guitars! 23-inch scale tenor guitar – open g (gdgb) tuning infinitely customizable our blues-iest kit yet! four strings in open g tuning with a classic lipstick tube pickup! br br easy to assemble and ready to be stained, painted, woodburned, decorated and customized. the top panel can even be flipped around to build a lefty guitar! br br designed and with most of the parts made right here at the c. b. gitty workshops in gonic, new hampshire, this amazing-sounding guitar can be built at your dining room table with just a few basic tools. no advanced woodworking is required (no sawing, routing, etc) – just some basic clamping, light drilling and screw insertion is all it takes to build your very own four-string tenor guitar. br br named for tupelo, mississippi, a town right in the heart of blues country and the birthplace of the king. br br tenor guitars have been around for many years, but they have always been the lesser-seen cousin of the 6-string guitar… but it is time for that to change! with their shorter scale (23 inches instead of 25+), fewer strings, and versatile tuning options, 4-string tenors are a great way to either get started playing, or to expand your repertoire. they are a great "step up" from 3-string cigar box guitars! br br this tenor kit comes with a set of strings meant for tuning to open g "gdgb", which has become the de facto standard for 4-string cigar box guitars. it comes with a full fretboard already attached to the neck, making assembly easy. the detailed how-to guide not only shows you how to assemble the kit, but also includes some basic how-to-play information as well, to help get you picking once the build is done. we also throw in a full-color copy of ben gitty's "essential 4-string chords poster" with every kit, which is a wealth of information to help get you strumming along with popular songs. br br assembly time on this kit is 3-4 hours, not including glue set-up time. it is recommended for ages 16 and up, though younger kids can help build it with close adult supervision. this kit
