Are you looking for the 12 Inch Radius Guitar Neck? If so, you’ve come to the right place.
Choosing the 12 Inch Radius Guitar Neck can be difficult as there are so many considerations, such as EVH, Martin, WD Music, Fender, Stewart-MacDonald, Floyd Rose, Solo Guitar. We have done a lot of research to find the top 20 12 Inch Radius Guitar Neck available.
The average cost is $361.79. Sold comparable range in price from a low of $19.00 to a high of $619.99.
Based on the research we did, we think WD Music TNMCR Rosewood is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling 12 Inch Radius Guitar Neck (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
$134.95
4.7
Reviewers Noted:
Visual appeal . Craftsmanship
Features:
- Fingerboard radius = 12 in
- Nut width = 1 11/16 in
- Profile shape = modern c-shape-fret type and count = medium 6150 / 22 frets-tuner peghole size = 25/64 in
$19.00
4.4
Reviewers Noted:
Sound quality
Features:
- Length: 72 mm
- Thickness: 3.2 mm
- Height: 11 mm
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- Genuine fender stratocaster neck crafted at fender's ensenada, mexico manufacturing facility
- Comfortable flat oval-shaped profile and 12"-radius pau ferro fingerboard with 22 jumbo frets
- The synthetic bone nut is pre-slotted with pilot grooves for accurate spacing when filing the final string slots
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfort
Features:
- 13/32 (10 mm)headstock thickness
- 540 (13.71 mm)thickness at the 1st fret
- 752 (19.10 mm)thickness at the 12th fret
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- This replacement neck is for a fender or squier by fender guitar.
- Dimensions 3.30×7.10×30.00 in / weight 2.80 lb.
- Your project is our project!
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfort
Features:
- Number of packages: 1
- Package weight: 1.2 kg
- Package dimensions (l × w × h): 8.128 zm 18.415 zm 75.946 zm
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- Genuine fender stratocaster neck crafted at fender's ensenada, mexico manufacturing facility
- Comfortable modern c-shaped profile and 9.5"-radius pau ferro fingerboard with 21 narrow-tall frets
- The synthetic bone nut is pre-slotted with pilot grooves for accurate spacing when filing the final string slots
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- 397" (10.08 mm)headstock thickness
- 540" (13.71 mm)thickness at the 1st fret
- 820" (20.82 mm)thickness at the 12th fret
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- Maple stratocaster neck with walnut stripe
- Channel-bound 9.5”-14” compound-radius fingerboard
- 21 medium jumbo frets; vintage ivory inlays
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- The neck pictured is the neck you receive.
- Resistant to humidity shifts and features a gorgeous, dark look, these necks have more sustain and add a unique note to the instrument's voice.
- Serial #mx20069809.
$499.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfort
Features:
- Condition: mint
- Serial #: us19087290
- Country/make: united states- american
$599.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfort
Features:
- The neck pocket has 4 offset pre-drilled pilot holes so if it is being installed on a standard body, a fifth pilot hole will need to be drilled.
- Special order only.
- This replacement neck is for a fender or squier by fender guitar.
$599.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- 404 (10.26 mm) headstock thickness
- 540 (13.71 mm) thickness at the 1st fret
- 820 (20.82 mm) thickness at the 12th fret
$399.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- This is the exact neck you'll receive!
- Weight – 1lbs 9.0oz.
- The synthetic bone nut is pre-slotted with "pilot" string location grooves to …
$399.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- This is the exact neck you'll receive!
- This replacement neck is for a fender or squier by fender guitar.
$549.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- No fret wear, no warping etc. frets still at basically 100% as i only had this neck installed on my strat for a few weeks.
- Drilled the holes for the string tree, to fit the modern style that comes on american professional.
- Listed for 435 but open to reasonable offers.
$349.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfort
Features:
- Genuine fender stratocaster neck crafted at fender's ensenada, mexico manufacturing facility
- Comfortable modern c-shaped profile and 9.5"-radius maple fingerboard with 21 narrow-tall frets
- The synthetic bone nut is pre-slotted with pilot grooves for accurate spacing when filing the final string slots
$619.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- Maple telecaster neck w/ walnut stripe
- Channel-bound 9.5”-14” compound-radius fingerboard
- 21 medium jumbo frets; vintage ivory inlays
Features:
- 1. this guitar neck is compatible for fender st-style electric guitar neck replacement.
- 2. high-quality maple neck, delicate and unique.
- 3. fingerboard with 22 frets, smooth and high density.
Features:
- Shaped, inlaid, fretted and finished—feels and plays great
- Hard rock maple with a thin, vintage tint finish
- Each neck has a single-action truss rod and traditional "skunk stripe" down the back
1. Wd Music Tnmcr Rosewood
Product Details:
Wd licensed by fender replacement 22 fret neck for telecaster modern c replacement telecaster neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 inch radius maple fingerboard. a thin clear satin finish makes this the perfect replacement for your modern telecaster . nut not included. all necks require a final level, crown, and polish and may need to be fine-tuned to your instrument and playing preferences. due to the organic nature of wood each neck is considered unique and may have minor variations in grain or finish from those pictured. wd does not sell what is commonly referred to as seconds or blems. wd neck heels are made to fender usa dimensions and tolerance, this may not account for neck pocket shrinkage or expansion over time. some neck pocket modification may be required.
Specifications:
| Watchers | 39 |
| Finish | Rosewood |
Reviews:
Fret work is just about perfect on mine. I put it on and set up was great out of the box. The maple is unusually white. No yellowness at all like most raw maple – not sure why. The size and specs seem right on, except, its listed as a 43mm nut width, it may be closer to 42. The string spacing is fine on my fender body. I would buy it again.hickman0116
Great neck. Dress the fret ends and good to go.tandej
An excellent American made quarter sawn neck for half the cost of a Fender. If your looking for a replacement or project neck can't can't go wrong with a WD. The fit and finish is on part with anything from Fender, plays well with a low action because the people at WD did an outstanding job of fret leveling before leaving the factory. I would definitely buy another one!pacnorwest11
2. Macnichol Unbleached Bone Guitar Saddle – 12 Inch Radius – Fully Compensated
Product Details:
Specifications:
| Length | 72 mm |
| Thickness | 3.2 mm |
| Radius | 12 inches |
Reviews:
I have done saddle work on many acoustic guitars ,and it takes a lot of hit and miss, to get it just right.The saddle, I received was,the exact high, and the right radius and needed just a few thickness sanding's to fit perfect. I Didn't have to do any length, height, or end rounding. The tone and the finished top *compensation* angles, of the saddle, are right on.This will be my new source, for my bone saddles. Thank you Guys….Michaelmickov-69
3. Fender Roasted Maple Stratocaster Neck Flat Oval Pau Ferro
Product Details:
There no denying the allure of a roasted maple neck. resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument voice. this genuine fender stratocaster neck is crafted at our ensenada, mexico manufacturing facility. featuring a comfortable flat oval shaped profile and 12 radius pau ferro fingerboard with 22 jumbo frets, this neck was designed for pure speed. the synthetic bone nut is pre slotted with pilot grooves for accurate spacing when filing the final string slots. the perfect way to give your stratauthentic fender feel, this replacement neck even sports our famous spaghetti logo on the headstock. this replacement neck is for a fender or squierby fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
| Product Dimensions | 29.5 x 7.4 x 3.2 inches |
| Country of Origin | Mexico |
| Is Discontinued By Manufacturer | No |
| Back Material | Maple Wood |
| Color Name | Brown |
| Fretboard Material | Morado |
| String Material | Nickel Steel |
| Top Material | Maple Wood |
| Neck Material Type | Maple |
| Number of Strings | 6 |
| Guitar Bridge System | Fixed |
| Fretboard Material Type | Morado |
| String Material Type | Nickel Steel |
| Hand Orientation | Right |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
4. Fender Roasted Maple Telecaster Neck
Product Details:
There’s no denying the allure of a roasted maple neck. resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument’s voice. this genuine fender telecaster neck is crafted at our ensenada, mexico manufacturing facility. featuring a comfortable "flat oval"-shaped profile and 12"-radius maple fingerboard with 22 jumbo frets, this neck was designed for pure speed. the synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. the perfect way to give your tele authentic fender feel, this replacement neck even sports our famous “spaghetti” logo on the headstock.
Specifications:
| Product Dimensions | 29.8 x 7.4 x 3.2 inches |
| Country of Origin | Mexico |
| Is Discontinued By Manufacturer | No |
| Back Material | Maple Wood |
| Color Name | Pau Ferro |
| Fretboard Material | Maple Wood |
| String Material | Nickel Steel |
| Top Material | Maple Wood |
| Neck Material Type | Maple |
| Number of Strings | 6 |
| Guitar Bridge System | Fixed |
| Fretboard Material Type | Maple Wood |
| String Material Type | Nickel Steel |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
5. Fender Deluxe Series Telecaster Neck, 22 Narrow Tall Frets, 12" Radius, Maple Fingerboard
Product Details:
Crafted at fender's ensenada, mexico manufacturing facility, this genuine fender telecaster deluxe guitar neck features a comfortable "c"-shaped profile and 12"-radius maple fingerboard with 22 narrow tall frets and black pearloid inlays.the synthetic bone nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin polyurethane finish on the back offers smooth playability. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
6. Fender Roasted Maple Stratocaster Neck Flat Oval
Product Details:
There’s no denying the allure of a roasted maple neck. resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument’s voice. this genuine fender stratocaster neck is crafted at the ensenada, mexico manufacturing facility. featuring a comfortable "flat oval"-shaped profile and 12"-radius maple fingerboard with 22 jumbo frets, this neck was designed for pure speed. the synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. the perfect way to give your strat authentic fender feel, this replacement neck even sports the famous “spaghetti” logo on the headstock.
Specifications:
| Product Dimensions | 29.5 x 7.4 x 3.2 inches |
| Country of Origin | Mexico |
| Is Discontinued By Manufacturer | No |
| Back Material | Maple Wood |
| Color Name | Pau Ferro |
| Fretboard Material | Maple Wood |
| String Material | Nickel Steel |
| Top Material | Maple Wood |
| Neck Material Type | Maple |
| Number of Strings | 6 |
| Guitar Bridge System | Fixed |
| Fretboard Material Type | Maple Wood |
| String Material Type | Nickel Steel |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
7. Fender Roasted Maple Stratocaster Neck (512)
Product Details:
There no denying the allure of a roasted maple neck. resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument voice. this genuine fender stratocaster neck is crafted at our ensenada, mexico manufacturing facility. featuring a comfortable modern c shaped profile and 9.5 radius pau ferro fingerboard with 21 narrow tall frets, this neck was designed for pure playability. the synthetic bone nut is pre slotted with pilot grooves for accurate spacing when filing the final string slots. the perfect way to give your stratauthentic fender feel, this replacement neck even sports our famous spaghetti logo on the headstock. this replacement neck is for a fender or squierby fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
8. Fender Stratocaster Neck, 21 Medium Jumbo Frets Maple
Product Details:
Genuine fender stratocaster guitar maple neck features a comfortable "modern c" profile and 9.5"-radius rosewood or maple fingerboard with 21 medium jumbo frets. also includes standard truss rod and pre-slotted synthetic bone nut. tinted satin urethane fi – fingerboard: maple – number of frets: 21fret size: medium jumbo – neck shape: modern "c"neck material: maple – neck finish: satin urethane on back of neck, gloss on face of headstock – fingerboard radius: 9.5" (241mm)scale length: 25.5" (648mm)nut material: synthetic bone (melamine)nut width: 1.650" (42mm)position inlays: white dot3/16" truss rod adjustment nut (at headstock)6 pre-drilled tuning machine holes with 2-guide pin holes for each tuning machine – each neck is serialized and stamped during quality inspection – walnut "skunk" stripe on back of neck – fender logo with "original contour body" decal
Specifications:
| Style | Modern |
| Neck Shape | Modern "C" |
| Tuner Mounting Configuration | 2-Guide Pin |
| Fingerboard Material | Maple |
| Neck Material | Maple |
| Nut Material | Synthetic Bone |
| Position Inlays | Black Dot |
| Truss Rod Nut | 3/16" Hex Adjustment |
| Truss Rod | Standard |
| Fingerboard Radius | 9.5" (241 mm) |
| Scale Length | 25.5" (648 mm) |
| Nut Width | 1.650" (42 mm) |
| Number of Frets | 21 |
| Fret Size | Medium Jumbo |
| Headstock Thickness | .540" (13.71 mm) |
| Peg Hole Diameter | .397" (10.08 mm) |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
9. Fender American Channel Bound Stratocaster Neck – Rosewood
Product Details:
Specifications:
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
10. Fender Vintera Mod &60's Stratocaster Roasted Maple Neck
Product Details:
There's no denying the allure of a roasted maple neck. resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument's voice. this genuine fender stratocaster neck is crafted at our ensenada, mexico manufacturing facility. featuring a "60's c" neck profile and 9.5"-radius maple fingerboard with 21 medium jumbo frets, for modern playing feel. the synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. the perfect way to give your strat authentic fender feel, this replacement neck even sports our famous "spaghetti" logo on the headstock. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
| Neck Material | Roasted Maple |
| Refinement Neck Material | Maple |
| Neck Shape | Modern C |
| Refinement Neck Shape | C Shape |
| Number of Frets | 21 |
| Scale Length | 25.5” (648 mm) |
| Fingerboard Radius | 9.5” (241 mm) |
| Fret Size | Medium Vintage |
| Truss Rods | Vintage-Style Butt Adjust |
| Tuner Mounting Configuration | Vintage-Style 2-Screw |
| Neck Mounting | 4 Bolt |
| Finish | Maple |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
11. Fender American Professional Stratocaster Neck – Maple
Product Details:
Designed for speed and comfort, this neck sports our innovative "deep c" neck profile, which, thanks to its increased mass and altered geometry, offers a natural fret-hand feel. other features include a 9.5"-radius maple or rosewood fingerboard, 22 narrow-tall frets, bone nut and a satin urethane finish on the back.this replacement neck is for a fender or squier by fender guitar.because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. your local fmic authorized service center can install genuine replacement necks.
Specifications:
| Compatibility | American Professional Stratocaster Guitar |
| Neck Shape | Deep "C" |
| Tuner Mounting Config | Modern 2-Peg |
| Fingerboard Material | Maple |
| Neck Material | Maple |
| Nut Material | Bone |
| Position Inlays | Black Dots |
| Neck Finish | Gloss Urethane Front, Satin Urethane Back |
| Truss Rod Nut | 1/8" American Series |
| Truss Rod | Standard |
| Fingerboard Radius | 9.5" (24.13cm) |
| Scale Length | 25.5" (64.77cm) |
| Nut Width | 1.685" (4.28cm) |
| Number of Frets | 22 |
| Fret Size | Narrow Tall |
| Headstock Thickness | 0.540" (13.72mm) |
| Neck Thickness | 1st Fret – .820" ( mm), 12th Fret – .920" ( mm) |
| Peg Hole Diameter | 0.404" (10.26mm) |
| Dimensions | 3.25 x 7.5 x 30" (8.26 x 19.05 x 76.20cm) |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
12. Fender American Professional Ii Stratocaster Neck, 22 Narrow Tall Frets, 9.5" Radius, Rosewood
Product Details:
Crafted in the same facility as fender u.s.-made instruments, the american professional ii stratocaster neck draws from more than sixty years of innovation, inspiration and evolution to meet the demands of today's working player. fender's popular deep "c" neck now sports smooth rolled fingerboard edges and a "super-natural" satin finish that provides a supremely comfortable feel. other features include a 9.5"-radius maple or rosewood fingerboard, bone nut and 22 narrow-tall frets for easy bending. the neck pocket has 4 offset pre-drilled pilot holes so if it is being installed on a standard body, a fifth pilot hole will need to be drilled. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
| Neck Material | Maple |
| Neck Shape | Deep “C” |
| Fingerboard Radius | 9.5” (241 mm) |
| Scale Length | 25.5” (648 mm) |
| Number of Frets | 22 |
| Fret Size | Narrow Tall |
| Nut Material | Bone |
| Nut Width | 1.685” (42.8 mm) |
| Truss Rod | Bi-Flex |
| Truss Rod Nut | 1/8” Hex Adjustment |
| Tuner Mounting | Dual Guide Pin |
| Peg Hole Diameter | .404” (10.26 mm) |
| Headstock Thick-ness | .540” (13.71 mm) |
| Neck Mounting | 4-Bolt Offset |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
13. Fender American Stratocaster Neck – Compound Radius – Maple Fingerboard
Product Details:
Fender replacement necks are made at fender manufacturing facilities to the same specifications as those used on fender's instruments. u.s.-made deluxe necks have detailed frets, tinted satin finishes on the back, hand-rolled fingerboard edges and a slim "modern c" profile for comfortably smooth playability. the nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing. for true fender authenticity, it's also serialized and stamped, with genuine headstock decal. the neck is also pre-drilled with five holes to accommodate a traditional fender's-bolt or offset fender's-bolt neck-mount design. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
| Finish | Maple |
| Year | 2010 – 2016 |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
14. Fender Precision To Jazz Bass Conversion Neck, 20 Med Jumbo Frets, 12" Radius | Natural
Product Details:
The fender precision to jazz bass conversion neck is a premium upgrade for any fender or squier bass product. constructed from maple, this neck will deliver a bright, lively and natural sound to any guitar – helping you find your own unique voice. affixed with a maple fingerboard and complete with a satin urethane finish which will have you gliding between the 20 medium jumbo frets with complete ease, for a supremely comfortable playability. this effect is compounded by the modern 'c' neck profile, which allows for minimal strain so you can play all night on stage, at home or in the studio. stamped with a fender logo on the gloss finished headstock, you'll be sure to complete an authentic aesthetic for your favourite bass guitar. what's more, the bone nut is pre-slotted with 'pilot' string location grooves for intuitive spacing when playing on the final string slot.
Specifications:
| Fingerboard | Pau Ferro |
| Position Inlays | White Dot |
| Side Dots | White |
| String Nut | Synthetic Bone |
| Fingerboard Radius | 12" (305 mm) |
| Fret Size | Medium Jumbo |
| Neck Material | Maple |
| Refinement Neck Material | Maple |
| Number of Frets | 20 |
| Nut Width | 1.5" (38.1 mm) |
| Scale Length | 34" (864 mm) |
| Truss Rod | Standard |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
15. Fender Precision To Jazz Bass Conversion Neck, 20 Med Jumbo Frets, 12" Radius, Maple Natural
Product Details:
The fender precision to jazz bass conversion neck is a premium upgrade for any fender or squier bass product. constructed from maple, this neck will deliver a bright, lively and natural sound to any guitar – helping you find your own unique voice. it's affixed with a maple fingerboard and complete with a satin urethane finish which will have you gliding between the 20 medium jumbo frets with complete ease, for a supremely comfortable playability. this effect is compounded by the modern 'c' neck profile, which allows for minimal strain so you can play all night on stage, at home or in the studio. stamped with a fender logo on the gloss finished headstock, you'll be sure to have an authentic aesthetic for your favourite bass guitar. what's more, the bone nut is pre-slotted with 'pilot' string location grooves for intuitive spacing when playing on the final string slot.
Specifications:
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
16. Fender American Professional Stratocaster Neck – Rosewood Fingerboard
Product Details:
This is a genuine replacement neck for fender american professional stratocasters built in the usa. it features the new deep c profile, a rosewood fingerboard and walnut skunk stripe, a 9.5" radius, 22 narrow tall frets, and a satin back finish. it also comes with a pre-slotted bone nut.
Specifications:
| Style | Stratocaster |
| Neck Shape | Deep C |
| Neck Material | Maple |
| Neck Finish | Gloss Urethane Front, Satin Urethane Back |
| Scale Length | 25.5 inches (648 mm) |
| Fingerboard Radius | 9.25 inches (235 mm) |
| Fingerboard Material | Rosewood |
| Number of Frets | 22 |
| Fret Size | Narrow Tall |
| Nut Material | Bone |
| Nut Width | 1.685 inch (42.8 mm) |
| Orientation | Right-Hand |
| Position Inlays | White Dots on Rosewood |
| Truss Rod Nut | 1/8 inch American Series |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
17. Fender Roasted Stratocaster Neck C Shape, Maple Fingerboard
Product Details:
There no denying the allure of a roasted maple neck. resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument voice. this genuine fender stratocaster neck is crafted at our ensenada, mexico manufacturing facility. featuring a comfortable modern c shaped profile and 9.5 radius maple fingerboard with 21 narrow tall frets, this neck was designed for pure playability. the synthetic bone nut is pre slotted with pilot grooves for accurate spacing when filing the final string slots. the perfect way to give your stratauthentic fender feel, this replacement neck even sports our famous spaghetti logo on the headstock. this replacement neck is for a fender or squierby fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
18. Fender American Channel Bound Telecaster Neck – Rosewood
Product Details:
This is an open-box neck, never installed on a guitar. this is a genuine replacement neck for fender american professional telecasters built in the usa – built out of solid rosewood! it features the new deep c profile, a 9.5" radius, 22 narrow tall frets, and a satin finish. it also comes with a pre-slotted bone nut.
Specifications:
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
19. Boxwizard Electric Guitar Neck 22 Fret Maple Fretboard Guitar Neck For St Style Guitar Diy Parts Replacement
Product Details:
1. this guitar neck is compatible for fender st-style electric guitar neck replacement. 2. high-quality maple neck, delicate and unique. 3. fingerboard with 22 frets, smooth and high density. 4. adjustable truss rod has been installed at the headstock. 5. the hole for the tuning machine is 10mm in diameter. p descriptions: br / frets: 22 frets br / neck: canadian maple neck br / fingerboard: rosewood br / nut: 42mm nut br / back midline: rosewood br / color: matte yellow br / peg holes diameter: 10 mm / 0.4 inch br / neck length: 665mm / 26.18 in br / heel width: 56mm/2.2in br / heel depth: 20mm-26mm(with fingerboard) br / neck weight: 590g/20.8oz – package included: br / 1*guitar neck /p
Specifications:
| Hand Orientation | Right |
| Number of Strings | 6 |
20. Mighty Mite Vintage Amber Neck For Strat, Maple Fingerboard
Product Details:
Shaped, inlaid, fretted and finished—feels and plays great hard rock maple with a thin, vintage tint finish each neck has a single-action truss rod and traditional "skunk stripe" down the back peghead is drilled for 6-in-line tuning machines, with 10mm-diameter holes that fit sealed gear tuners with threaded peghead bushing features 25-1/2" scale length and 9-1/2" fretboard radius (see product description for more specs) p shaped, inlaid, fretted and finished—looks and plays great! /b hard rock maple with a thin, vintage tint finish, and an inlaid "skunk stripe" down the back. – other features include: /b – ul li thin polyurethane finish /li li slotted and shaped pps plastic string nut, with flat bottom /li li 22 frets /li li maple fingerboard /li li peghead-adjustable truss rod (for 4mm allen wrench) /li li traditional dot inlays /li li without mounting holes, so you can drill to fit your body /li li peghead drilled for 6-in-line tuning machines, with 10mm-diameter holes that fit sealed gear tuners with threaded peghead bushings. /li /ul p specifications: /b – ul li scale length: 25-1/2" (647.70mm) /li li width at nut: 1-11/16" (42.86mm) /li li width at 22nd fret: 2-3/16" (55.56mm) /li li fretwire: .045" high x .095" wide (1.14mm x 2.41mm) /li li fretboard radius: 9-1/2" (241.30mm) /li li fret count: 22 /li li string post spread: 4-11/16" (119.06mm) /li li approximate heel length: 3-5/8" (92.07mm) /li li fits neck pockets measuring 2-3/16" (55.56mm) wide x 3" (76.20mm) long x 5/8" (15.88mm) deep. /li /ul p neck thickness (approximate; not including fret): /b – ul li .860" (21.84mm) at the 1st fret /li li .880" (22.35mm) at the 6th fret /li li .890" (22.61mm) at the 12th fret /li /ul p ideally, the neck should just drop into the neck-pocket, or be a little snug. don't force the neck into the pocket. if the body is unfinished, remember that the finish will make the neck pocket smaller with lacquer build up on the edge of the rout. be sure to compensate for the finish buildup or the neck will be too tight after finishing. /p
Specifications:
Related posts:
- Guitar Neck Pocket Dimensions For Sale (2024 Update)
- Guitar Neck Radius Explained For Sale (2024 Update)
- Guitar Neck Radius Guide For Sale (2024 Update)
- 24 Inch Scale Electric Guitar For Sale (2024 Update)
- 30 Inch Electric Guitar For Sale (2024 Update)
- 10 Bass Guitar Speaker For Sale (2024 Update)
- 8 Inch Bass Guitar Speakers For Sale (2024 Update)
- Guitar Amp And Cord For Sale (2024 Update)
- Lyx Pro Electric Guitar For Sale (2024 Update)
- Lyxpro 30 Inch Electric Guitar For Sale (2024 Update)
