Are you looking for the Slim Taper Guitar Neck? If so, you’ve come to the right place.
Choosing the Slim Taper Guitar Neck can be difficult as there are so many considerations, such as Epiphone, WD Music, DiMarzio, Peavey, Fender, Stewart-MacDonald, Suhr, Solo Guitar, Muslady. We have done a lot of research to find the top 20 Slim Taper Guitar Neck available.
The average cost is $380.28. Sold comparable range in price from a low of $52.99 to a high of $2699.00.
Based on the research we did, we think Fender Stratocaster Neck, 21 Medium Jumbo Frets Maple is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Slim Taper Guitar Neck (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- 397" (10.08 mm)headstock thickness
- 540" (13.71 mm)thickness at the 1st fret
- 820" (20.82 mm)thickness at the 12th fret
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- Maple stratocaster neck with walnut stripe
- Channel-bound 9.5”-14” compound-radius fingerboard
- 21 medium jumbo frets; vintage ivory inlays
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- This is the exact neck you'll receive!
- Weight – 1lbs 1.9oz.
- This replacement neck is for a fender or squier by fender guitar.
$499.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfort
Features:
- Condition: mint
- Serial #: us19087290
- Country/make: united states- american
$599.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- The neck pocket has 4 offset pre-drilled pilot holes so if it is being installed on a standard body, a fifth pilot hole will need to be drilled.
- Special order only.
- This replacement neck is for a fender or squier by fender guitar.
$299.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- Neck: maple
- Fingerboard: pau ferro
- Number of frets: 22
$349.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfort
Features:
- Genuine fender stratocaster neck crafted at fender's ensenada, mexico manufacturing facility
- Comfortable modern c-shaped profile and 9.5"-radius maple fingerboard with 21 narrow-tall frets
- The synthetic bone nut is pre-slotted with pilot grooves for accurate spacing when filing the final string slots
$242.95
4.6
Reviewers Noted:
Craftsmanship . Comfort . Visual appeal
Features:
- Soft v-shape, one-piece maple neck w/7.25" radius
- Classic 1-5/8" nut width
- Heel width 2-3/16"
Features:
- 1. this guitar neck is compatible for fender tl style electric guitar neck replacement.
- 2. high-quality maple neck, delicate and unique.
- 3. fingerboard with 22 frets, smooth and high density.
Features:
- Fret: cupronickel.
- Nut: abs dimension information.
- Tuner hole: 10mm.
$65.00
Features:
- Suitable for diy electric guitars amateur fit diy electric guitar or neck replacement neck wood: mahogany fretboard wood: rose wood finish: unfinished inlay: no inlaid side dots: left side dots…
$75.00
Features:
- Nothing much to say, just an s neck in worn, but usable, condition. great for a partscaster project. it should fit any standard 25.5" s-style or jazz style guitar.the frets…
$649.99
4.4
Features:
- This is the exact neck you'll receive!
- Weight – 1lbs 3.8oz.
- This replacement neck is for a fender or squier by fender guitar.
$449.99
4.4
Features:
- For you: 1x fender road worn 50's stratocaster neck
- Best quality: developed and manufactured by fender usa
- Your advantage: fender original parts
$2699.00
Features:
- Gibson les paul standard, 1999 60's slim taper neck. the condition is used. i’d say it’s in vintage shape, in that it has signs of its age, but it hasn’t…
$92.68
Features:
- 1 pc electric guitar neck 6 string tele neck wenge guitar neck 22 frets varnish good handicraft tl guitar neck for electric guitar abalone dot inlay. material: wenge wood fingerboard:…
$79.99
Features:
- This solo guitar neck is intended as a replacement or diy project. neck specifications may have a +/- 1 or 2mm variance. if using this neck with a non solo…
$55.00
Features:
- Here we have: a bc brand s-style neck in really good condition. great for a partscaster project — should fit any standard 25.5" scale s or jazz style guitar.the frets…
Features:
- 1. this guitar neck is compatible for fender st-style electric guitar neck replacement.
- 2. high-quality maple neck, delicate and unique.
- 3. fingerboard with 22 frets, smooth and high density.
1. Fender Stratocaster Neck, 21 Medium Jumbo Frets Maple
Product Details:
Genuine fender stratocaster guitar maple neck features a comfortable "modern c" profile and 9.5"-radius rosewood or maple fingerboard with 21 medium jumbo frets. also includes standard truss rod and pre-slotted synthetic bone nut. tinted satin urethane fi – fingerboard: maple – number of frets: 21fret size: medium jumbo – neck shape: modern "c"neck material: maple – neck finish: satin urethane on back of neck, gloss on face of headstock – fingerboard radius: 9.5" (241mm)scale length: 25.5" (648mm)nut material: synthetic bone (melamine)nut width: 1.650" (42mm)position inlays: white dot3/16" truss rod adjustment nut (at headstock)6 pre-drilled tuning machine holes with 2-guide pin holes for each tuning machine – each neck is serialized and stamped during quality inspection – walnut "skunk" stripe on back of neck – fender logo with "original contour body" decal
Specifications:
| Style | Modern |
| Neck Shape | Modern "C" |
| Tuner Mounting Configuration | 2-Guide Pin |
| Fingerboard Material | Maple |
| Neck Material | Maple |
| Nut Material | Synthetic Bone |
| Position Inlays | Black Dot |
| Truss Rod Nut | 3/16" Hex Adjustment |
| Truss Rod | Standard |
| Fingerboard Radius | 9.5" (241 mm) |
| Scale Length | 25.5" (648 mm) |
| Nut Width | 1.650" (42 mm) |
| Number of Frets | 21 |
| Fret Size | Medium Jumbo |
| Headstock Thickness | .540" (13.71 mm) |
| Peg Hole Diameter | .397" (10.08 mm) |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
2. Fender American Channel Bound Stratocaster Neck – Rosewood
Product Details:
Specifications:
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
3. Fender Classic Player '50s Stratocaster Neck Soft V Shape – Maple
Product Details:
This official fender classic player '50s stratocaster maple neck has a vintage style soft v profile, 9.5" fretboard radius, 21 medium jumbo frets and a gloss urethane finish for smooth playability. the synthetic bone nut is pre-slotted with 'pilot' string slots to make spacing a breeze when performing the final string slot filing, the neck has 9.1 mm tuner bushing holes drilled on the headstock face for vintage style tuners with press fit bushings (some reaming of the hole may be required for a perfect press fit) and the truss rod adjustment nut is at the heel. this replacement neck is the perfect way to give your strat an authentic '50s feel and fits fender or squier curved heel end stratocaster guitars. some fret levelling/dressing and polishing may be required and minor woodwork to fit the neck to the body. please note the photo displayed is an example image only and the wood grain and serial number will differ on the neck you receive.
Specifications:
| Compatibility | Classic Player '50s Stratocaster Guitar |
| Neck Shape | Soft "V" |
| Tuner Mounting Configuration | 2 Guide-Pin |
| Fingerboard Material | Maple |
| Neck Material | Maple |
| Nut Material | Synthetic Bone |
| Position Inlays | Black Dots |
| Truss Rod Nut | Vintage-Style Slotted |
| Truss Rod | Vintage-Style Heel Adjust |
| Fingerboard Radius | 9.5" (24.13cm) |
| Scale Length | 25.5" (647.70mm) |
| Nut Width | 1.65" (41.91mm) |
| Number of Frets | 21 |
| Fret Size | Medium Jumbo |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
4. Fender American Professional Stratocaster Neck – Maple
Product Details:
Designed for speed and comfort, this neck sports our innovative "deep c" neck profile, which, thanks to its increased mass and altered geometry, offers a natural fret-hand feel. other features include a 9.5"-radius maple or rosewood fingerboard, 22 narrow-tall frets, bone nut and a satin urethane finish on the back.this replacement neck is for a fender or squier by fender guitar.because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. your local fmic authorized service center can install genuine replacement necks.
Specifications:
| Compatibility | American Professional Stratocaster Guitar |
| Neck Shape | Deep "C" |
| Tuner Mounting Config | Modern 2-Peg |
| Fingerboard Material | Maple |
| Neck Material | Maple |
| Nut Material | Bone |
| Position Inlays | Black Dots |
| Neck Finish | Gloss Urethane Front, Satin Urethane Back |
| Truss Rod Nut | 1/8" American Series |
| Truss Rod | Standard |
| Fingerboard Radius | 9.5" (24.13cm) |
| Scale Length | 25.5" (64.77cm) |
| Nut Width | 1.685" (4.28cm) |
| Number of Frets | 22 |
| Fret Size | Narrow Tall |
| Headstock Thickness | 0.540" (13.72mm) |
| Neck Thickness | 1st Fret – .820" ( mm), 12th Fret – .920" ( mm) |
| Peg Hole Diameter | 0.404" (10.26mm) |
| Dimensions | 3.25 x 7.5 x 30" (8.26 x 19.05 x 76.20cm) |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
5. Fender American Professional Ii Stratocaster Neck, 22 Narrow-Tall Frets, 9.5" Radius, Maple
Product Details:
Crafted in the same facility as fender u.s.-made instruments, the american professional ii stratocaster neck draws from more than sixty years of innovation, inspiration and evolution to meet the demands of today s working player. the popular deep c neck sports smooth rolled fingerboard edges and a super-natural satin finish that provides a supremely comfortable feel. other features include a 9.5" radius fingerboard, bone nut and 22 narrow-tall frets for easy bending. the neck pocket has 4 offset pre-drilled pilot holes so if it is being installed on a standard body, a fifth pilot hole will need to be drilled. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
| Fingerboard Material | Maple |
| Neck Material | Maple |
| Neck Shape | Deep “C” |
| Fingerboard Radius | 9.5” (241 mm) |
| Scale Length | 25.5” (648 mm) |
| Number of Frets | 22 |
| Fret Size | Narrow Tall |
| Nut Material | Bone |
| Nut Width | 1.685” (42.8 mm) |
| Truss Rod | Bi-Flex |
| Truss Rod Nut | 1/8” Hex Adjustment |
| Tuner Mounting | Dual Guide Pin |
| Peg Hole Diameter | .404” (10.26 mm) |
| Headstock Thick-ness | .540” (13.71 mm) |
| Neck Mounting | 4-Bolt Offset |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
6. Fender Sub-Sonic Baritone Stratocaster Neck Pau Ferro
Product Details:
Crafted at our ensenada mexico manufacturing facility this genuine fender baritone subsonic stratocaster guitar neck will convert your standard scale length guitar into a 27 scale length baritone! features a comfortable modern c profile and 9.5 radius pau ferro fingerboard with 22 medium jumbo frets. the nut is preslotted with pilot string location grooves to make spacing a breeze when performing the final string slot filing and a satin finish on the back offers smooth playability. this replacement neck is for a fender or squier by fender guitar.
Specifications:
| Neck Shape | “C” Shape |
| Neck Finish | Gloss Urethane |
| Radius | 9.5” (241 mm) |
| Scale Length | 27” (686 mm) |
| Number of Frets | 22 |
| Fret Size | Medium Jumbo |
| Position Inlays | Black Dot on Maple and White Dot on Pau Ferro |
| Nut Material | Plastic |
| Nut Width | 1.650” (42 mm) |
| Truss Rod | Standard |
| Truss Rod Nut | 3/16” Hex at Headstock |
| Tuner Mounting | Dual Guide Pin |
| Headstock Thickness | .540” (13.71 mm) |
| Neck Mounting | 4-Bolt |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
7. Fender Roasted Stratocaster Neck C Shape, Maple Fingerboard
Product Details:
There no denying the allure of a roasted maple neck. resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument voice. this genuine fender stratocaster neck is crafted at our ensenada, mexico manufacturing facility. featuring a comfortable modern c shaped profile and 9.5 radius maple fingerboard with 21 narrow tall frets, this neck was designed for pure playability. the synthetic bone nut is pre slotted with pilot grooves for accurate spacing when filing the final string slots. the perfect way to give your stratauthentic fender feel, this replacement neck even sports our famous spaghetti logo on the headstock. this replacement neck is for a fender or squierby fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
8. Allparts Tmnf-V Maple V Shape Tele Neck
Product Details:
Allparts tmnf-v replacement neck for telecaster is “officially licensed by fender ” and made to exacting quality standards in japan. with a soft-v neck shape, vintage 7.25” radius, 21 vintage frets, and a vintage-tinted nitrocellulose top-coat, the tmnf-v is the perfect choice for players craving that vintage look and feel. allparts tmnf-v maple v shape tele neck features 21 vintage frets .079" x .043" soft v-shape, one-piece maple neck with 7.25" radius classic 1-5/8" nut width heel width 2-3/16" nitro-over-poly finish vintage tuning peg hole diameter .340" neck thickness .90" at the first fret, .99" at the twelfth fret
Specifications:
| Watchers | 54 |
Reviews:
unfinished neck….took some work to dress the fret ends, but turned out very nice.steevesellaes
Im a player that has longer fingers and the fat neck cut down on player fatigue. Bought a rosewood a few weeks ago and came back to buy a maple neck with the nitro finish. They are beautiful necks and Im more than happy with my two Tele builds. Keep in mind that you will have to remove the nitro finish from the frets for it is standard practice to apply the finish to the entire neck. There are a few YouTube videos out there on how to properly do this. I personally taped up my fretboard and used a fine sandpaper to remove the finish from the frets. Also pay attention to the hole size in the headstock for your tuners. You may have to enlarge the holes provided and add those little pilot holes to stabilize your tuners. Just TAKE YOUR TIME with your build or replacement neck and you should be as satisfied as I am.smitus_s3lzwcnku
9. Boxwizard Electric Guitar Neck 22 Fret Maple Guitar Neck Replacement For Tl Tele Electric Guitar
Product Details:
1. this guitar neck is compatible for fender tl style electric guitar neck replacement. 2. high-quality maple neck, delicate and unique. 3. fingerboard with 22 frets, smooth and high density. 4. adjustable truss rod has been installed at the headstock. 5. the hole for the tuning machine is 10mm in diameter. p strong descriptions: /strong br / frets: 22 frets br / neck: canadian maple neck br / fingerboard: canadian maple br / nut: 42mm nut br / back midline: rosewood br / color: bright yellow br / peg holes diameter: 10 mm / 0.4 inch br / neck length: 65.8cm / 25.9 in br / heel width: 55mm br / heel depth: 20mm-26mm(with fingerboard) br / neck weight: 580g/20.45oz – strong package included: /strong br / 1 * guitar neck /p
Specifications:
| Neck | Canadian Maple Neck |
| Peg Holes Diameter | 10 mm / 0.4 inch |
| Neck Length | 65.8cm / 25.9 in |
| Heel Depth | 20mm-26mm(with fingerboard) |
| Neck weight | 580g/20.45oz |
10. Bexgears Electric Guitar Neck For Canada Maple 22 Fret Bolt On
Product Details:
Details: fret: cupronickel nut: abs dimension information tuner hole: 10mm width at nut: 42mm with at heel: 57.5mm( 0.5 mm deviation) thickness at heel: 27mm truss rod: two-way adjustable, 4mm allen wrench adjustable truss rod has been installed at the headstock. neck wood: maple frets: 22 frets
Specifications:
| Package Dimensions | 28.7 x 4.4 x 2.2 inches |
| Is Discontinued By Manufacturer | No |
11. 2 Guitars Neck Only
12. Mahogany Guitar Neck 24fret 27inch Rosewood Fretboard No Inlay Bolt
Product Details:
Suitable for diy electric guitars amateur fit diy electric guitar or neck replacement neck wood: mahogany fretboard wood: rose wood finish: unfinished inlay: no inlaid side dots: left side dots 27 inch, if you need any scale length please contact me. frets: 24 nickel/silver frets truss rod adjust: at headstock or bottom
13. Unknown Origin S-Style Guitar Neck Natural 1990s
Product Details:
Nothing much to say, just an s neck in worn, but usable, condition. great for a partscaster project. it should fit any standard 25.5" s-style or jazz style guitar.the frets still have a good amount of life in them. neck seems relatively straight, and the truss rod does still have some room to move. there is some tear out on the heel but it has been glued and is stable. i am including the black tuners and string trees. priced to sell. sold "as described." no returns.got questions? shoot me a message, i love nerding out with other gearheads!
14. Fender American Pro Stratocaster Neck Figured Maple Rosewood Fretboard
Product Details:
This is a genuine replacement neck for fender american professional stratocasters built in the usa. it features a deep c profile, a rosewood fingerboard and walnut skunk stripe, a 9.5" radius, 22 narrow tall frets, and a satin back finish. it also comes with a pre-slotted bone nut. this is a neck made of lightly figured maple and each one varies from neck to neck!
Specifications:
| Finish | Rosewood |
| Year | 2020s |
15. Fender Road Worn 50's Stratocaster Neck Maple
Product Details:
This official fender road worn 50's stratocaster maple neck has a late '50s soft v profile, 7.25" fretboard radius with 21 vintage tall frets and an aged nitro lacquer finish. the nitrocellulose lacquer applied to the neck is a vintage accurate finish that wears gradually over time creating a pleasantly worn in appearance with use, fender's road worn necks are hand distressed to faithfully recreate the look and feel of a well loved vintage instrument. the synthetic bone nut is pre-slotted with 'pilot' string slots to make spacing a breeze when performing the final string slot filing, the neck has 9.1 mm tuner bushing holes drilled on the headstock face for vintage style tuners with press fit bushings (some reaming of the hole may be required for a perfect press fit) and the truss rod adjustment nut is at the heel. this replacement neck is the perfect way to give your strat an authentic '50s feel and fits fender or squier curved heel end stratocaster guitars. some fret levelling/dressing and polishing may be required and minor woodwork to fit the neck to the body. please note the photo displayed is an example image only, the wood grain, aging/relicing and serial number will differ on the neck you receive.
Specifications:
| Finish | Maple |
| Fingerboard Material | Pau Ferro |
| Fingerboard Radius | 7.25" (184.1 mm) |
| Neck Finish | Road Worn Nitrocellulose Lacquer |
| Neck Material | Maple |
| Neck Mounting | 4-Bolt |
| Neck Shape | Mid '60s "C" |
| Number of Frets | 21 |
| Nut Material | Synthetic Bone |
| Nut Width | 1.650" (42 mm) |
| Position Inlays | White Dot |
| Side Dots | White |
| String Nut | Synthetic Bone |
| Truss Rod | Vintage-Style Butt Adjust |
| Truss Rod Nut | Vintage-Style Slotted |
16. Gibson Les Paul Standard, 1999 60's Slim Taper Neck
Product Details:
Gibson les paul standard, 1999 60's slim taper neck. the condition is used. i’d say it’s in vintage shape, in that it has signs of its age, but it hasn’t been completely abused. it does have buckle rash and swirls from years of playing. the neck did, unfortunately, suffer a fracture at some point in its life. however, the repair was professionally done, and it’s very strong. 60's slim taper neck. very comfortable. some of the cracking you see is only from the finish. guitar is pretty stock, but there are some upgrades that include: -tulip style grover tuners -gibson 500k volume and tone pots -orange drop capacitors (.022 bridge, .047 neck) -schaller strap locks (included with guitar) action is great, neck is straight. pickups are original and i believe they are 498t/496t. with the upgraded electronics they sound pretty good. original case is included. no pickguard.
17. Best Electric Guitar Neck 6 String Tele Neck Wenge Guitar Neck 22
Product Details:
1 pc electric guitar neck 6 string tele neck wenge guitar neck 22 frets varnish good handicraft tl guitar neck for electric guitar abalone dot inlay. material: wenge wood fingerboard: wenge wood fingerboard length: 47.6cm upper nut: 4.2cm widest at the heel: 5.5-5.6cm deepest at heel: 2.0 cm finish: matte color: brown frets: 22f truss rod adjust: at headstock 。it can ship fast today.
18. Solo St Style 21 Fret Guitar Neck With Rosewood Fretboard
Product Details:
This solo guitar neck is intended as a replacement or diy project. neck specifications may have a +/- 1 or 2mm variance. if using this neck with a non solo body / solo hardware, slight modifications may be necessary in order to achieve a proper fit. this neck is unfinished and comes pre-sealed with a poly-resin sealer. features maple neck rosewood fretboard 12′′ radius 21 frets 2-way truss rod mop dot inlays & side markers 25 1/2′′ scale length nut width: 1 5/8′′ thickness at nut: 13/16′′ thickness at 12th fret: 15/16′′ width at 12th fret: 2 1/16′′ item shown: solo st style 21 fret guitar neck with rosewood fretboard model #: sl-stnrw21h-u upc: 0787392886756
19. Bc Guitars S-Style Neck Natural 2000s
Product Details:
Here we have: a bc brand s-style neck in really good condition. great for a partscaster project — should fit any standard 25.5" scale s or jazz style guitar.the frets still have a good amount of life in them. neck seems relatively straight, and the truss rod does still have some room to move.priced to sell. sold "as described."got questions? shoot me a message, i love nerding out with other gearheads!
20. Boxwizard Electric Guitar Neck 22 Fret Maple Fretboard Guitar Neck For St Style Guitar Diy Parts Replacement
Product Details:
1. this guitar neck is compatible for fender st-style electric guitar neck replacement. 2. high-quality maple neck, delicate and unique. 3. fingerboard with 22 frets, smooth and high density. 4. adjustable truss rod has been installed at the headstock. 5. the hole for the tuning machine is 10mm in diameter. p descriptions: br / frets: 22 frets br / neck: canadian maple neck br / fingerboard: rosewood br / nut: 42mm nut br / back midline: rosewood br / color: matte yellow br / peg holes diameter: 10 mm / 0.4 inch br / neck length: 665mm / 26.18 in br / heel width: 56mm/2.2in br / heel depth: 20mm-26mm(with fingerboard) br / neck weight: 590g/20.8oz – package included: br / 1*guitar neck /p
Specifications:
| Hand Orientation | Right |
| Number of Strings | 6 |
