Are you looking for the Skunk Stripe Guitar Neck? If so, you’ve come to the right place.
Choosing the Skunk Stripe Guitar Neck can be difficult as there are so many considerations, such as WD Music, Fender. We have done a lot of research to find the top 20 Skunk Stripe Guitar Neck available.
The average cost is $288.80. Sold comparable range in price from a low of $9.90 to a high of $900.00.
Based on the research we did, we think Mighty Mite MM2902CR-M Strat Style Compound Radius 22 Fret C-Shaped Maple Neck with Maple Fretboard, Merbau Skunk is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Skunk Stripe Guitar Neck (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
|
$151.90
5.0
Reviewers Noted:
Craftsmanship
Features:
- C profile 22 fret maple fretboard compound radius
- Neck & tuners
- Wood variations & assembly
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- 397" (10.08 mm)headstock thickness
- 540" (13.71 mm)thickness at the 1st fret
- 820" (20.82 mm)thickness at the 12th fret
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- Maple stratocaster neck with walnut stripe
- Channel-bound 9.5”-14” compound-radius fingerboard
- 21 medium jumbo frets; vintage ivory inlays
$349.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfort
Features:
- Genuine fender stratocaster neck crafted at fender's ensenada, mexico manufacturing facility
- Comfortable modern c-shaped profile and 9.5"-radius maple fingerboard with 21 narrow-tall frets
- The synthetic bone nut is pre-slotted with pilot grooves for accurate spacing when filing the final string slots
$199.99
Features:
- Specifications
- Made to exact vintage 60 s specifications
- 1 piece maple neck
$9.90
Features:
- Start guitar 21frets canadian maple back rosewood skunk stripe st guitar neck unfinished custom…
$119.00
Features:
- Maple neck-(brand new) skunk stripe (roswood) maple fretboard for tele body truss rod adjustment at headstock these necks are very nicely finished out and headstock cut as close to fender…
$49.89
Features:
- Teli style neck brand new nicely finished and headstock cut as close to fender not to cause infringement problem. the neck in the picture is stock and all necks are…
$156.10
Features:
- Neck & tuners
- Wood variations & assembly
- Fender style licensed guitar necks
$649.99
4.4
Features:
- This is the exact neck you'll receive!
- Weight – 1lbs 3.8oz.
- This replacement neck is for a fender or squier by fender guitar.
$449.99
4.4
Features:
- For you: 1x fender road worn 50's stratocaster neck
- Best quality: developed and manufactured by fender usa
- Your advantage: fender original parts
$203.00
Features:
- Mm2925-m strat style finished neck features: birdseye maple neck 9.5" straight radius with c profile and merbau "skunk" stripe birdseye maple fingerboard with abalone dots and black side dot markers…
$229.00
Features:
- New fender lic wd telecaster tele replacement neck skunk stripe rosewood / maple. limited run! official fender licensed wd music replacement neck for fender telecaster wood: maple with rosewood fingerboard…
$180.00
Features:
- Mm2905c-m tele style finished neck features: maple neck 9.5" straight radius with c profile and merbau "skunk" stripe maple fingerboard with black dots and black side dot markers pre-slotted 42mm…
$341.18
Features:
- One of the kind limited production brand new neck made fully out of high grade indian rosewood with rosewood fingerboard and flame maple skunk stripe. it took me over half…
$341.18
Features:
- One of the kind limited production brand new neck made fully out of high grade indian rosewood with rosewood fingerboard and flame maple skunk stripe. it took me over half…
$169.99
Features:
- Find fender squier strat neck skunk stripe rosewood electric guitar stratocaster on ebay in the category musical instruments & gear>guitars & basses>parts & accessories>guitar & bass parts>necks….
$159.99$139.99
Features:
- C profile 22 fret rosewood fretboard compound radius
- Neck & tuners
- Wood variations & assembly
$265.00
Features:
- Mm2910cr-m strat style finished neck features: maple neck 9.5-12" compound radius with c profile and merbau "skunk" stripe ebony fingerboard with pearloid dots and white side dot markers pre-slotted 42mm…
$900.00
Features:
- The original bolt on aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. it is designed…
1. Mighty Mite Mm2902cr-M Strat Style Compound Radius 22 Fret C-Shaped Maple Neck With Maple Fretboard, Merbau Skunk
Product Details:
Mm2902cr-m strat style finished neck features: maple neck 9.5-12" compound radius with c profile and merbau "skunk" stripe maple fingerboard with black dots and black side dot markers pre-slotted 42mm (1 5/8") pps flat bottom string nut 22 medium (2.4mm) nickel frets single-adjust truss rod at headstock – 4mm wrench not included 25 1/2" scale length heel is approximately 2 3/16" wide by 3" high and 5/8" deep tuner holes are pre-drilled 10mm 6-in-line for modern tuners note: if installing vintage tuners; you may be required to install 10mm adapter bushings. mighty mite does not supply these bushings.these replacement necks are for fender or squier by fender guitar. the necks are licensed to mighty mite by fender musical instruments corporation under a quality control trademark license.this model is made in indonesia with quality tone woods and is sealed with an oil-based satin polyurethane. due to the nature of wood, no two necks are the same a…
Specifications:
| Fretboard Material | Maple |
| Neck Material | Maple |
| Skunk Stripe | Merbau stripe |
| Finish | Satin, Thin Polyurethane Oil Based |
| Neck Profile Shape | C Shape |
| Orientation | Right-hand |
| Scale Length | 25-1/2" |
| Radius | 9.5" at nut, 12" compound at 22nd fret |
| Nut Width | 42mm installed nut |
| Nut Material | PPS-Flat Bottom |
| Heel Size Approximately | 2-11/64" wide by 3" high and 5/8" deep |
| Number of Frets | 22 |
| Fret Size | Medium – 2.4mm – Nickel |
| Inlays | Black Dots |
| Side Dots | Black |
| Tuner Hole Size | 10mm 6-in-line Modern Tuners |
Reviews:
I have a Warmoth neck that costs 3 times what the Mighty Might costs. The Warmoth is prettier, maybe, but it's also a bit chunkier, while the MM neck has a wonderfully thin shape that has what I would call perfect "playability." The first thing one does with a new neck is look carefully at the shape and construction quality. The MM is very well made. The frets were all seated properly and disappeared precisely one behind the other as you looked down the length. No high ends. When installed, I have the lowest action of any of my guitars, due to the compound radius fretboard. In short, this is the finest neck I've had my hands on. I'll take a MM neck over a Warmoth neck, any day.stevelexi
2. Fender Stratocaster Neck, 21 Medium Jumbo Frets Maple
Product Details:
Genuine fender stratocaster guitar maple neck features a comfortable "modern c" profile and 9.5"-radius rosewood or maple fingerboard with 21 medium jumbo frets. also includes standard truss rod and pre-slotted synthetic bone nut. tinted satin urethane fi – fingerboard: maple – number of frets: 21fret size: medium jumbo – neck shape: modern "c"neck material: maple – neck finish: satin urethane on back of neck, gloss on face of headstock – fingerboard radius: 9.5" (241mm)scale length: 25.5" (648mm)nut material: synthetic bone (melamine)nut width: 1.650" (42mm)position inlays: white dot3/16" truss rod adjustment nut (at headstock)6 pre-drilled tuning machine holes with 2-guide pin holes for each tuning machine – each neck is serialized and stamped during quality inspection – walnut "skunk" stripe on back of neck – fender logo with "original contour body" decal
Specifications:
| Style | Modern |
| Neck Shape | Modern "C" |
| Tuner Mounting Configuration | 2-Guide Pin |
| Fingerboard Material | Maple |
| Neck Material | Maple |
| Nut Material | Synthetic Bone |
| Position Inlays | Black Dot |
| Truss Rod Nut | 3/16" Hex Adjustment |
| Truss Rod | Standard |
| Fingerboard Radius | 9.5" (241 mm) |
| Scale Length | 25.5" (648 mm) |
| Nut Width | 1.650" (42 mm) |
| Number of Frets | 21 |
| Fret Size | Medium Jumbo |
| Headstock Thickness | .540" (13.71 mm) |
| Peg Hole Diameter | .397" (10.08 mm) |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
3. Fender American Channel Bound Stratocaster Neck – Rosewood
Product Details:
Specifications:
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
4. Fender Roasted Stratocaster Neck C Shape, Maple Fingerboard
Product Details:
There no denying the allure of a roasted maple neck. resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument voice. this genuine fender stratocaster neck is crafted at our ensenada, mexico manufacturing facility. featuring a comfortable modern c shaped profile and 9.5 radius maple fingerboard with 21 narrow tall frets, this neck was designed for pure playability. the synthetic bone nut is pre slotted with pilot grooves for accurate spacing when filing the final string slots. the perfect way to give your stratauthentic fender feel, this replacement neck even sports our famous spaghetti logo on the headstock. this replacement neck is for a fender or squierby fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
5. Solo Pro Tc Style Vintage 60’s 1 Piece Maple Guitar Neck With Maple Fretboard & Skunk Stripe
Product Details:
This solo pro guitar neck is intended as a replacement or diy project. neck specifications may have a +/- 1 or 2mm variance. if using this neck with a non solo body / solo hardware, slight modifications may be necessary in order to achieve a proper fit. specifications 1 piece maple neck maple fretboard 12′′ fretboard radius 22 frets 25.5′′ scale length 8.7 mm tuner bushing holes made to exact vintage 60’s specifications unfinished vintage style heel adjust truss rod made in japan item shown: solo pro tc style vintage 60’s 1 piece maple guitar neck with maple fretboard & skunk stripe model #: tcn1m22p-u upc: 0787392886329
6. Start Guitar 21frets Canadian Maple Back Rosewood Skunk Stripe St Guitar Neck Unfinished Custom
Product Details:
7. Tele Neck Skunk Stripe Maple Fretboard (Brand New)
Product Details:
Maple neck-(brand new) skunk stripe (roswood) maple fretboard for tele body truss rod adjustment at headstock these necks are very nicely finished out and headstock cut as close to fender as possible without causing an infringement problem. headstock is not identical to a fender tele. no overhang lip. measurments: heel width 2 1/4" tuning machine holes: 13/32" 22 frets depth 1" radius 12/13 tuning machine holes pre-drilled string nut included string nut size : 1 5/8" no local pick up shipping only continental 48 states-usa ========================================== +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
8. Tele Style Neck – Maple Fretboard (Brand New) Skunk Stripe On Back –
Product Details:
Teli style neck brand new nicely finished and headstock cut as close to fender not to cause infringement problem. the neck in the picture is stock and all necks are similar but not exact. some adjustments might have to be made to fit your specs. description: maple neck maple fretboard skunk stripe on back truss rod adjustment at headstock heel width 2 1/4" tuning machine holes: 13/32" 22 frets heel depth 1" radius 12/13 no hardware included with neck terms of sale : returns are accepted within 14 days of delivery date. if the return is due to a mistake in the description of the item, we will refund 100% of the purchase price. for any other reason we will charge a 15% restocking/handling fee. in all instances the buyer is responsible for return postage. buyer must contact us prior to returning an item. item's marked 'sold as-is' are not returnable or refundable shipping: all orders are usually shipped within 2 to 3 business days of payment except holiday’s or weekend’s. we will send email to notify buyers your
9. Mighty Mite Mm2935cr-Rh-R Reverse Headstock Strat Style Compound Radius 22 Fret C-Shaped Maple Neck With Maple Fretboard, Rosewood Skunk
Product Details:
Mm2935cr-rh-m strat style finished neck features: right handed neck with reverse headstock maple neck 9.5-12" compound radius with c profile and merbau "skunk" stripe (note: this model has a merbau skunk stripe which is lighter in color than pictured.) maple fingerboard with black dots and black side dot markers pre-slotted 42mm pps flat bottom string nut note: string nut installed for a right-handed player 22 medium (2.4mm) nickel frets single-adjust truss rod at headstock – 4mm wrench not included 25-1/2" scale length heel is approximately 2-3/16" wide by 3" high and 5/8" deep tuner holes are pre-drilled 10mm 6-in-line for modern tuners note: if installing vintage tuners; you may be required to install 10mm adapter bushings. mighty mite does not supply these bushings.these replacement necks are for fender or squire by fender guitar. the necks are licensed to mighty mite by fender musical instruments corporation under a quality control …
Specifications:
| Fretboard Material | Maple |
| Neck Material | Maple |
| Skunk Stripe | Merbau stripe |
| Finish | Satin, Thin Polyurethane Oil Based |
| Neck Profile Shape | C Shape |
| Orientation | Right-hand |
| Scale Length | 25-1/2" |
| Radius | 9.5" at nut, 12" compound at 22nd fret |
| Nut Width | 1.65" (42mm) installed nut |
| Nut Material | PPS-Flat Bottom |
| Number of Frets | 22 |
| Inlays | Black Dots |
| Side Dots | Black |
| Tuner Hole Size | 10mm 6-in-line Modern Tuners |
10. Fender American Pro Stratocaster Neck Figured Maple Rosewood Fretboard
Product Details:
This is a genuine replacement neck for fender american professional stratocasters built in the usa. it features a deep c profile, a rosewood fingerboard and walnut skunk stripe, a 9.5" radius, 22 narrow tall frets, and a satin back finish. it also comes with a pre-slotted bone nut. this is a neck made of lightly figured maple and each one varies from neck to neck!
Specifications:
| Finish | Rosewood |
| Year | 2020s |
11. Fender Road Worn 50's Stratocaster Neck Maple
Product Details:
This official fender road worn 50's stratocaster maple neck has a late '50s soft v profile, 7.25" fretboard radius with 21 vintage tall frets and an aged nitro lacquer finish. the nitrocellulose lacquer applied to the neck is a vintage accurate finish that wears gradually over time creating a pleasantly worn in appearance with use, fender's road worn necks are hand distressed to faithfully recreate the look and feel of a well loved vintage instrument. the synthetic bone nut is pre-slotted with 'pilot' string slots to make spacing a breeze when performing the final string slot filing, the neck has 9.1 mm tuner bushing holes drilled on the headstock face for vintage style tuners with press fit bushings (some reaming of the hole may be required for a perfect press fit) and the truss rod adjustment nut is at the heel. this replacement neck is the perfect way to give your strat an authentic '50s feel and fits fender or squier curved heel end stratocaster guitars. some fret levelling/dressing and polishing may be required and minor woodwork to fit the neck to the body. please note the photo displayed is an example image only, the wood grain, aging/relicing and serial number will differ on the neck you receive.
Specifications:
| Finish | Maple |
| Fingerboard Material | Pau Ferro |
| Fingerboard Radius | 7.25" (184.1 mm) |
| Neck Finish | Road Worn Nitrocellulose Lacquer |
| Neck Material | Maple |
| Neck Mounting | 4-Bolt |
| Neck Shape | Mid '60s "C" |
| Number of Frets | 21 |
| Nut Material | Synthetic Bone |
| Nut Width | 1.650" (42 mm) |
| Position Inlays | White Dot |
| Side Dots | White |
| String Nut | Synthetic Bone |
| Truss Rod | Vintage-Style Butt Adjust |
| Truss Rod Nut | Vintage-Style Slotted |
12. Mighty Mite Mm2925-M Strat Style 22 Fret C-Shaped Birdseye Maple Neck With Birdseye Maple Fretboard, Merbau Skunk
Product Details:
Mm2925-m strat style finished neck features: birdseye maple neck 9.5" straight radius with c profile and merbau "skunk" stripe birdseye maple fingerboard with abalone dots and black side dot markers pre-slotted 42mm pps flat bottom string nut 22 jumbo (2.9mm) nickel frets single-adjust truss rod at headstock – 4mm wrench not included 25-1/2" scale length heel is approximately 2-3/16" wide by 3" high and 5/8" deep tuner holes are pre-drilled 10mm 6-in-line for modern tuners note: if installing vintage tuners; you may be required to install 10mm adapter bushings. mighty mite does not supply these bushings.these replacement necks are for fender or squier by fender guitar. the necks are licensed to mighty mite by fender musical instruments corporation under a quality control trademark license.this model is made in indonesia with quality tone woods and is sealed with an oil-based satin polyurethane. due to the nature of wood, no two necks ar…
Specifications:
| Fretboard Material | Birdseye Maple |
| Neck Material | Birdseye Maple |
| Skunk Stripe | Merbau stripe |
| Finish | Satin, Thin Polyurethane Oil Based |
| Neck Profile Shape | C Shape |
| Orientation | Right-hand |
| Scale Length | 25-1/2" |
| Radius | 9.5" Straight |
| Nut Width | 42mm installed nut |
| Nut Material | PPS-Flat Bottom |
| Heel Size Approximately | 2-11/64" wide by 3" high and 5/8" deep |
| Number of Frets | 22 |
| Fret Size | Jumbo – 2.9 mm — Nickel |
| Inlays | Black Dots |
| Side Dots | Black |
| Tuner Hole Size | 10mm 6-in-line Modern Tuners |
13. Fender Lic Wd Telecaster Tele Replacement Neck Skunk Stripe Rosewood
Product Details:
New fender lic wd telecaster tele replacement neck skunk stripe rosewood / maple. limited run! official fender licensed wd music replacement neck for fender telecaster wood: maple with rosewood fingerboard frets: 22, dunlop 6105 profile: modern "c" shape truss rod adjustment: at headstock tuner hole size: modern 25/64" (10 mm) scale length: 25.5" radius: 12" nut width: 1 11/16" inlay: clay dots 1st fret thickness = 0.83 in. 12th fret thickness = 0.88 in. finish: unfinished condition: new comments: a limited run of top shelf quality exotic wood fender licensed necks for an incredible price! please note these are actually photos of item listed not stock photos
14. Mighty Mite Mm2905c-M Tele Style 21 Fret C-Shaped Maple Neck With Maple Fretboard, Merbau Skunk
Product Details:
Mm2905c-m tele style finished neck features: maple neck 9.5" straight radius with c profile and merbau "skunk" stripe maple fingerboard with black dots and black side dot markers pre-slotted 42mm pps flat bottom string nut 22 medium (2.4mm) nickel frets single-adjust truss rod at headstock – 4mm wrench not included 25-1/2" scale length heel is approximately 2-3/16" wide by 3" high and 5/8" deep tuner holes are pre-drilled 10mm 6-in-line for modern tuners note: if installing vintage tuners; you may be required to install 10mm adapter bushings. mighty mite does not supply these bushings.these replacement necks are for fender or squier by fender guitar. the necks are licensed to mighty mite by fender musical instruments corporation under a quality control trademark license.this model is made in indonesia with quality tone woods and is sealed with an oil-based satin polyurethane. due to the nature of wood, no two necks are the same and may d…
15. Rosewood Tele Neck Stainless Steel Frets Flame Maple Stripe
Product Details:
One of the kind limited production brand new neck made fully out of high grade indian rosewood with rosewood fingerboard and flame maple skunk stripe. it took me over half year to outsource enough material to build this necks!! this is by far the best neck i have ever made my goal was to made the best ''tele'' type neck out of the best material available! rosewood necks are very rare and hard to find, and also very expensive. these necks have freshly slotted stainless steel frets and real unbleached buffalo bone nut, which are hand-installed by professional luthier. in addition, the necks are finished with thin satin polyurethane coat, which gives the perfect protection and premium feeling. the necks are made fully by cnc machine so tolerance is very high. with qc provided by a professional luthier in canada, the quality is guaranteed. i'm passionate about my work and i spend lot of time making sure that the neck is in perfect shape. frets are leveled on each of my necks also fret ends are carefully rounded, this in one of highlights that differentiate my necks from others spec's: scale length 25.5 material: rosedwood fingerboard: rosewood tuner holes- 10mm nut: unbleached buffalo bone nut nut: 4.2cm widest at the heel: 5.5-5.6cm deepest at heel: 2.0 cm finish: matte color: natural frets: 22 medium jumbo stainless steel jescar frets radius: 9,5 inch
16. Rosewood Strat Neck Stainless Steel Frets Flame Maple Stripe
Product Details:
One of the kind limited production brand new neck made fully out of high grade indian rosewood with rosewood fingerboard and flame maple skunk stripe. it took me over half year to outsource enough material to build this necks!! this is by far the best neck i have ever made my goal was to made the best ''s'' type neck out of the best material available! rosewood necks are very rare and hard to find, and also very expensive. these necks have freshly slotted stainless steel frets and real unbleached buffalo bone nut, which are hand-installed by professional luthier. in addition, the necks are finished with thin satin polyurethane coat, which gives the perfect protection and premium feeling. the necks are made fully by cnc machine so tolerance is very high. with qc provided by a professional luthier in canada, the quality is guaranteed. i'm passionate about my work and i spend lot of time making sure that the neck is in perfect shape. frets are leveled on each of my necks also fret ends are carefully rounded, this in one of highlights that differentiate my necks from others spec's: scale length 25.5 material: rosedwood fingerboard: rosewood tuner holes- 10mm nut: unbleached buffalo bone nut nut: 4.2cm widest at the heel: 5.5-5.6cm deepest at heel: 2.0 cm finish: matte color: natural frets: 22 medium jumbo stainless steel jescar frets radius: 9,5 inch
17. Fender Squier Strat Neck Skunk Stripe Rosewood Electric Guitar
Product Details:
18. Mighty Mite Mm2900cr-R Fender Licensed Strat Replacement Neck – C Profile 22 Fret Fretboard Compound Radius Rosewood
Product Details:
Neck & tuners – strat style replacement neck features a compound radius, rosewood fingerboard fitted with 22 medium frets. if installing vintage tuners; you may be required to install 10 mm adapter bushings. mighty mite does not supply these bushings. – wood variations & assembly – due to the nature of wood, no two necks are the same and may differ from what is pictured. never force the neck into the pocket; it should just drop into the neck pocket or be a little snug. remember that the finish of the neck and body will make the neck pocket smaller. – fender style licensed guitar necks – mighty mite necks are licensed by fender musical instruments corporation under a quality control trademark license. its headstock profile is a registered trademark of fender musical instrument corporation. stratocaster , strat , telecaster and tele are trademarks of fender musical instrum…
Specifications:
| Fretboard Material | Rosewood |
| Neck Material | Maple |
| Skunk Stripe | Rosewood stripe |
| Finish | Satin, Thin Polyurethane Oil Based |
| Neck Profile Shape | C Shape |
| Orientation | Right-hand |
| Scale Length | 25-1/2" |
| Radius | 9.5" at nut, 12" compound at 22nd fret |
| Nut Width | 42mm installed nut |
| Nut Material | PPS-Flat Bottom |
| Heel Size Approximately | 2-11/64" wide by 3" high and 5/8" deep |
| Number of Frets | 22 |
| Fret Size | Medium – 2.4mm – Nickel |
| Inlays | Pearloid Dots |
| Side Dots | White |
| Tuner Hole Size | 10mm 6-in-line Modern Tuners |
19. Mighty Mite Mm2910cr-M Strat Style Compound Radius 22 Fret C-Shaped Maple Neck With Ebony Fretboard, Merbau Skunk
Product Details:
Mm2910cr-m strat style finished neck features: maple neck 9.5-12" compound radius with c profile and merbau "skunk" stripe ebony fingerboard with pearloid dots and white side dot markers pre-slotted 42mm (1-5/8") pps flat bottom string nut 22 medium (2.4mm) nickel frets single-adjust truss rod at headstock – 4mm wrench not included 25 1/2" scale length heel is 2 3/16" wide by approximately 3" high and 5/8" deep tuner holes are pre-drilled 10mm 6-in-line for modern tunersnote: if installing vintage tuners; you may be required to install 10mm adapter bushings. mighty mite does not supply these bushings.these replacement necks are for fender or squire by fender guitar. the necks are licensed to mighty mite by fender musical instruments corporation under a quality control trademark license.this model is made in indonesia with quality tone woods and is sealed with an oil-based satin polyurethane. due to the nature of wood, no two necks are the same and ma…
Specifications:
| Finish | Satin Polyurethane, Oil Based |
| Year | 2022 |
| Made In | Indonesia |
20. 25.5" Aluminum Guitar Neck
Product Details:
The original bolt on aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. it is designed to be an aftermarket fit with most stratocasters, telecasters, and jazzmasters. it comes with everything you need to replace your current neck with one from rgi. necks are built to order with your specifications, so expect up to a two month wait before receiving your neck. neck specs: material: 6061 solid billet aluminum scale: 25.5” nut width: 1 11/16” weight: solid billet: 3 lbs 3 oz, hollow richlite: 2 lbs 2 oz frets: 22 stainless steel medium/medium fretboard radius: 12” tuners: 3+3 sperzel locking nut: 6061 aluminum (cut for heavy gauge strings)(0.013", 0.020", 0.024", 0.035", 0.046", and 0.056") or cut to your specific gauges if specified heel pocket: fender strat style (5/8” deep, 2.18” heel width, 3” total length, 5” radius heel curve) thickness: .700” at nut, .725” at 7th fret, .740” at 12th fret .760” at 15th fret neck shape: very flat u shape, maximum thinness without structural loss, no tapered heel includes: 4 stainless steel 1 1/2 “ 10-24 mounting bolts, backplate, buffing compound, and 2 microfibre cloths frequently asked questions why aluminum? when looking for a neck, there are a lot of different variables to look at. structurally, a solid billet of aluminum will offer the most rigidity of the option possible. there is no truss rod or other materials to stress and strain during temperature or moisture changes. additionally, that additional strength can help with the wear and tear of tour, stages, and other bumps and bruises any guitar will have to sustain during it’s lifespan. sonically, the density of aluminum may give you an advantage with more sustain and over tones, since the neck won’t sympathetically vibrate with the strings. this is, as with anything, certainly up for debate as to what your ears hear and your hands feel. it’s worth noting that it will feel colder to the touch since aluminum is a better thermal conductor than wood, and it does noticeably weigh more. will this fit my guitar? yes: for the most part, if you’re running a telecaster, stratocaster, or jazzmaster, you should be able to bolt this neck directly onto the body. maybe not: if you are running a t-60, jaguar, mustang, or 72’ telecaster deluxe; you cannot run this neck without modifications due to scale and bolt pattern restrictions. if you are confused and unsure, contact a local luthier to help you with your project. it’s a worthy profession to support and you’ll learn new things. if you are considering a guitar not mentioned here, then i’m not sure. can i do the change over myself? yes: most seasoned guitarist can probably do this, yes. but read this: i have pre-drilled the necks and they are tapped with machine bolts. you may have to adjust neck angle, saddle heights, and intonate your guitar afterwords. if your action is still too loose for your preference, a luthier can help you with adjusting the nut string depths to a tighter playing style. the depths are set fairly high to allow for adjustment after installation. what is the 700 series? the 700 series is the first set of necks that i designed, named after the thickness at the nut for the design. i will be continuing this convention for each style going forward, so anything with this thickness will be in the 700 series, and further designs may be in a new series for their specific design requirements. can i get something custom? short answer, yes: i can make a neck for any project. in the recent past i’ve also made custom guitars, hand-wired tube amps, cabs, a few different pedals and even a pickup. custom, multiple runs: if you are a guitar builder and are interested in ordering a batch of necks custom fit and finished for your company or brand, please reach out. i can offer discounts for custom work at scale. fully custom, one-off builds: if you have your sights set on something fully custom, i’d be glad to chat with you about your needs. this process is expensive. the new neck would need to be prototyped, engineered, manufactured, and then finished, all with processes and measurements outside of my normal set-up. you’d be looking at at least a handful of months and a starting price around $5,000. can i get mine cheaper? faster? no affirm asked me to add this, if you use affirm please read this or something like that if you finance with affirm and if one or more items in your order has an extended ship date, your loan payment(s), including interest, may be due before the
Specifications:
| Weight | 6 lb |
