Rimowa Les Paul Guitar Case For Sale (2024 Update)

I purchased this item to protect my Gibson Les Paul Custom Signature Series Guitar. As reviewed, the interior is extremely plush. The exterior looks quite dependable for all intent and purposes. Like others noted, the points of contention are the metal pieces attaching the handle preventing a 5 star rating. It is illogical to spend so much time on every detail "except" the parts supporting ALL the weight of the instrument. It appears that with a given amount of weight shift, the support brackets may snap off allowing the case to fall down in the direction of the headstock and potentially cause damage from impact. Since this case will very rarely see time outside of my home, I feel fairly certain the few times I need to transport my axe, I will be careful.1amun_re

Cheap shell covered with vinyl. Cheap handle. Cover is falling off where the case curves in. Stitching is a joke, not real. It should sell for about $40. At least it fits my guitar. Not even close in quality to a Road Runner for about the same price.nolens

i ordered this with intentions of getting the most for my money. I don't have big bucks to spend, but I wanted certain things and I got what I hoped for. I wanted enough length to accommodate the longer-than-typical headstock on my LP copy Bradley. The measurements were clearly lined out. The rest of the fit was perfect and plush. My only criticism is the metal bracket that secures the nice handle seems a little thin, but I expected there to be a little give-and-take somewhere, for this price. I'm pretty handy and will figure out a way to reinforce it. If not for this I'd give it 5 stars! FYI, Standard Shipping meant US Post Office, at least in my case. I'm glad I have a good-natured mail carrier.filmbuffed

Like most, I looked at the cheaper alternatives when seeking to replace the flimsy gig bag for my new (2016) USA SG Standard. While there are cheaper options, they do not provide the neck support necessary for the SG – this case offers the correct support for the angle of the set neck in the form of a "ramp" where it meets the body. Many of the generic "one size fits all" cases do not. This case also cradles the instrument properly, and is not "too tight" and/or "too loose" along the curves of the body. Now, I'm no fan of overpriced Gibson-branded accessories, and would have opted for aftermarket if the fit was the same but sadly this is the only way I found to properly protect my SG. This is a quality TKL Canadian-made case with "Gibson Gear" silkscreened on it, and the cost, for me, justifies the peace of mind. Was well packed (double boxed) and shipped quickly – great job by MF.Bob

This is a sturdy case! Much nicer than what Gibson has used in the last several years. As I understand it this case is made in Costa Rica. Its much heavier and stout compared to the Canadian or Chinese cases. I bought it to fit my real 57' Single Cut Junior but it also fits my 59'Double Cut perfectly! Like a glove! I will buy another…….JTSOB

I bought this case for my 2016 50s Tribute LP. I know the gig bag could do a good job for protecting my guitar, but nothing beats a hard shell case. This case is pretty awesome for what it is. Looks like it was made from tough plywood, and the covering looks pretty tough as well. This case doesn't have a locking hinge. You have to buy a padlock for it. The interior has a plush gray lining that provides soft cushioning for your LP, and its safe on the finish as well. My LP fits snug inside the case, it does not shake around, which gives me peace of mind that it won't be shaking around when I'm carrying it about. Visual aesthetics are simple but elegant. The Gibson Gear logo blazing across the front looks cool, although I personally wish it could've been the Gibson USA logo. The leather tab for the accessory compartment has the Gibson logo embossed on it, nothing too special. It's a good case for a decent price. I wouldn't mind recommending it.AcousticMetroTech

Like most, I looked at the cheaper alternatives when seeking to replace the flimsy gig bag for my new (2016) USA SG Standard. While there are cheaper options, they do not provide the neck support necessary for the SG – this case offers the correct support for the angle of the set neck in the form of a "ramp" where it meets the body. Many of the generic "one size fits all" cases do not. This case also cradles the instrument properly, and is not "too tight" and/or "too loose" along the curves of the body. Now, I'm no fan of overpriced Gibson-branded accessories, and would have opted for aftermarket if the fit was the same but sadly this is the only way I found to properly protect my SG. This is a quality TKL Canadian-made case with "Gibson Gear" silkscreened on it, and the cost, for me, justifies the peace of mind. Was well packed (double boxed) and shipped quickly – great job by MF.Bob

This is a sturdy case! Much nicer than what Gibson has used in the last several years. As I understand it this case is made in Costa Rica. Its much heavier and stout compared to the Canadian or Chinese cases. I bought it to fit my real 57' Single Cut Junior but it also fits my 59'Double Cut perfectly! Like a glove! I will buy another…….JTSOB

I bought this case for my 2016 50s Tribute LP. I know the gig bag could do a good job for protecting my guitar, but nothing beats a hard shell case. This case is pretty awesome for what it is. Looks like it was made from tough plywood, and the covering looks pretty tough as well. This case doesn't have a locking hinge. You have to buy a padlock for it. The interior has a plush gray lining that provides soft cushioning for your LP, and its safe on the finish as well. My LP fits snug inside the case, it does not shake around, which gives me peace of mind that it won't be shaking around when I'm carrying it about. Visual aesthetics are simple but elegant. The Gibson Gear logo blazing across the front looks cool, although I personally wish it could've been the Gibson USA logo. The leather tab for the accessory compartment has the Gibson logo embossed on it, nothing too special. It's a good case for a decent price. I wouldn't mind recommending it.AcousticMetroTech

The Gator GWE ¾ Economy Acoustic Guitar Case is a good fit for a RainSong 12-fret parlor (CH-PA). It took about an hour for the stuffing to compress where closing the case took no minimal extra effort (due to the depth of the RainSong). Here are the numbers in inches: Option: Total Length x Body Length x Lower Bout x Depth; Gator Interior: 38 x 19 x 13.74 x 4; Martin 12 fret 0: 37.75 x 19.125 x 13.5 x 4.0625; RainSong P12: 37.5 x 18.8 x 13.3 x 4.1; An interesting external dimension comparison (my measurements) GSmini Hard Bag: 39 x 16 x 6; Gator GWE ¾: 39.75 x 15.75 x 5.75; This case is not a top-of-the-line wood case and I don't think worthy of being used for checked luggage (maybe no wood case is). But it is as compact as it is going to get and a good option for that occasional gate checked carry-on. Since RainSong makes 12 and 14 fret Parlor guitars, their stock case is likely a couple of inches longer (and probably a more expensive AND HEAVIER case). It appears MF gets them bulk packaged, their shipping box was not that sturdy, and was very beaten up by UPS. There were dents in the case but not enough to bother returning (it is a testament to the case's construction that it was otherwise undamaged). Other retailers have it for quite a bit more and maybe that is with individual OEM packaging.Jon Fields

I bought this case for my Ibanez EW2012ASENT 12-String Acoustic-Electric Guitar. I like that it has a deep storage compartment, that fits my capo, pics, guitar strap, nicely! And the case comes with a key, to lock the metal clasp. Very Sturdy. I am confident that my guitar will be well protected!Victoria

Great case. There are a few things I would change but that is with everything. Construction and fit are very nice and it looks like it will survive a nuclear blast.ryapeppe_8

Well made for the money. The picture doesn't really show the quality, but it's there. My Gibson SG standard fits a little loose, but not enough to move around with the lid closed. Latches seem to be solid and not to cheaply made like other competitors product. It gets five stars. Musiciansfriend get five stars also because they made the entire sales process very simple and direct. Thanks for the great job!!!!Tommyb

Sound: N/A Features: The separate interior compartment was one of the reasons for the purchase but nothing fit. Gibson Les Paul Standard doesn't fit. The neck isn't supported thus causing the body to rock back and forth. Kramer Assault 220+ does not fit. Same problem with the neck as the LP. PRS SE Fredrik Akesson doesn't fit because the body is too thick. Ease of Use: N/A Quality: The outer plastic case material felt thin and flimsy. It'll probably protect your guitar during daily carry but I don't think it'll survive an impact. The latches and hinges are terrible. The latch metal and plating is rough and sharp on the edges. All the latch pivot pins are bowed, I suspect from tension keeping the cover closed tight. The hinges are mounted slightly crooked with the middle hinge mounted on a curve so the edges stick out. All around poor selection of hardware and poor workmanship. The blown foam interior is smaller that the case leaving a 1/4 inch space all the way around. The plush interior hides this gap but it's significant. One of the desiccant packets was open inside (?!) and a few of the little pellets are now rolling around underneath … which means there's airspace underneath! I though it was solid foam? Guess not. Value: I'm not sure what fits in this case … properly … but for $109, its quality and workmanship is marginal and a far cry from the PRS hard case I tried for $177. I would put this in the $60 range but maybe I'm expecting too much. Manufacturer Support: N/A The Wow Factor: It looked good until I actually got it in my hands. Overall: Overall, not worth it. Very poor construction. Not sure what fits. Returning it.Paul

The case is road worthy, and does its job of protecting my guitar! As a touring musician (to any musician), that is what matters most. It is a simple good looking case and I am very pleased that I bought it!I've had it for a couple of months, and have traveled and performed through 3 states with it. I live in Florida and deal with weather that is very humid and big up and down temperature changes during the winter and spring months and the case still looks new and continues to keep my guitar safe!Gene M

Overall: I received this out of the Mississippi Warehouse. It was dinged in several placed along the seam that connects both sides. The bottom had a gap just shy of 1/4 inches and even with the 5 latches closed the gap was there. It only has 2 hinges! major stupid idea. This is for a wide guitar Duh. Three hinges pleaseBrett

I have a PRS S2 singlecut standard that PRS is still working on getting a case designed to fit, I was told by their support that it should be ready within the next year or so, I was not going to wait so I tried many cases of different brands. I got this case for an awesome price ($115 plus free shipping). It's a good sturdy case with TSA latches, I did have to pad the lower bout which I was expecting to do anyway, but for the price and for the protection of my investment I am extremely pleased.truefret2

This case cradles my Les Paul beautifully. It is sturdy. The transit friendly locks are smooth. It is a really good deal compared with the stock hard case. The SKB gives you more for less.charles2055

I give this bag only 3 stars because unless Gator upgraded the bag or is making it in the U.S., I don't see the reason for the price increase. I bought one of these for a Sterling by Music Man bass as I was under the impression Gator bags were made in the U.S. when, come to find out, they're made in China (as are Fender gig bags). As the photos indicate, this bag will work for a Fender P Bass, but the Fender FB620 is a better bag for that and other Fender bass guitars while presently costing 10 less than the Gator while offering better protection and features. The Gator GB-4G seems to be more of a universal fit bag accommodating a wider range of sizes. The thing it seemed to have going for it the most was its zipper which seemed heavy duty. I say "seemed" because I returned the bass and so the bag as well.Vice

I bought a used guitar for back porch jamming. Needed a gig bag that didn't cost more than the guitar ,but would keep it safe and clean. Stopped at Sam ash because I was certain they had a variety of gig bags. Not my first visit or purchase.The Gator gig bag I chose is the economy for dreadnought guitars by Gator. Great price for my budget and well made. This bag is perfect for my needs. Easy carry and my guitar is covered.Just enough padding in all the right places for my guitar. Also accessory zipper compartment.Lindy

I'm giving this bag only 3 stars on account of the price increase; for it used to cost about 4-5 less than the Fender FE620 but now costs about 10 more than? Unless it has improved features or is being made in the U.S., I don't see the reason for the price increase as the FE620 gig bag provides better protection and features (for Strat size guitars anyway). I purchased one in May 2021 and only because as I was of the impression Gator bags were made in the U.S. when, come to find out, they're made in China (as are Fender gig bags). I should have sized things up beforehand since the Sterling by Music Man Cutlass I bought the bag for is essentially a slightly shorter, slightly sleeker version of a Strat (for which the FE620 was made). The best thing the Gator bag seemed to have going for it was the zipper which seemed rather heavy duty while mesh pockets on the front of a gig bag aren't particularly practical while being subject to tearing/ripping. As you can see by the photos, there's too much room in the bag for a Strat size guitar (though one might be able to insert the headstock into the bag's internal top pocket to prevent the guitar from sliding around too much in the bag). The Gator GB-4G ELEC Series Gig Bag is more of a universal fit bag better suited for guitars longer and/or wider than a Strat.Vice

I bought this guitar for my Martin DX Johnny Cash. The big problem and flaw is ( THE LOCKING LATCH )! The top of the latch is secured with TWO SCREWS!! With the case closed and locked, I had three latches open, two screws out, top of the latch off, case open, GUITAR OUT, case closed, top of latch on, two screws in and three latches down in ( 60 SECONDS )!!! In out in 60 seconds, and the case looked like it had never been touched!! ( The point of locking the case is so no one can have easy access to you'r valuable instrument )! GOOD -NEWS PROBLEM SOLVED! I replaced the two screws with two (POP RIVETS) – Now I'm a happy camper!KOOL ( GUITAR HAND ) LUKE

I ordered 2 of these at once for guitars I built going out this week, and was unhappy when they arrived today. Both have big bubbles in the fabric on both the top and bottom where the fabric is not glued down to the wood underneath. I don't want my customers to see them so will look for alternative cases locally now if my upholstery guy can't fix them. The black vinyl gator cases I usually buy are a lot better looking! I gave them 3 stars because otherwise they look great, until you see the bubbles.Guitarmaker

Nice case, a bit oversized for my Seagull M6, but that was expected with a non model specific case. Looks very nice with the cloth covering and the blue plush lining. Is decently padded and provides more than enough protection for road trips of in the house. Overall a really nice case for the money.Cowboy Tim

You can't stand the case up, it'll just fall over. You can lean it, but the angle is too much. It's very sturdy, but you'll have to slide it under your bed. I wouldn't recommend traveling with it.Joe

This is a well built case, but your not able to stand it up. You'll have to lean it against wall or slide it under a bed. It's heavy, (which I like). The latches are nice and tight.Jori

Liked this case enough that I bought two. Tried the V1 first for the black interior, but the interior was sloppy and the exterior had visible dips and swells. Not so with this one. Well crafted, snug fit, and shallow enough for thin body Les Paul. Perfect.Jason

The case I bought for my guitar was as advertised. It fit perfectly and held the guitar firmly in place, plus the construction was first rate, made of wood and padded well! Knowing the type and dimensions of your instrument will get you a case that will securely keep your guitar from sliding around in it and will not cause any unnecessary damage to your instrument. This guitar case is really well constructed and the latches are very good also. A case is one of the best investments you'll make for your instruments and this one fits the bill and budget perfectly!Mark

First case arrived with bent latch, missing key and dimple on the front exterior face. Returned it. Second case arrived with latch that did not match up with the top flange pushed in so it would not fit in the bottom receiving slot. Will not bend out to fit without damaging the case. Also had oily staining on multiple areas of the front face that is slowly, but not completely yet coming off with soap and water and hard scrubbing. The interior fit is PERFECT. I am exhausted by the back and forth and will probably accept this one even though one of the latches does not fit properly. The case still seems very functional, but the crew manufacturing the outside of these cases is not paying attention and I suspect they are not inspected. No what you would get from a higher quality manufacturer.photonic

I really like this case. After years of using a substandard case, I really have come to appreciate this well made, high quality case. The interior is soft and well padded- it protects the guitar from the dings and pings of everyday use. The case is well crafted, everything fits together perfectly. It has solid high quality metal hinges and 4 metal closures. There are metal feet on the bottom and rear of the case for protection. I can't believe the high quality of this case for such a reasonable price. No bad smell like some of the other cases.Super slim

This is a good case as long as these issues don't concern you: 1. My Gibson LP slides around inside the case. I find this surprising as this is a repro Lifton case. To secure the guitar inside the case, you have to pack it out with t-shirts or towels. Huh? 2. The latches feel flimsy. I'm not sure how much abuse these could withstand. I have an ESP case for a different guitar, and the latches on that are solid as are the latches on my OEM Gibson case. I think that Gator have sized this case to accommodate a bunch of different guitars, like Epiphone LPs and other single cutaway guitars. This makes sense for Gator but not for Gibson LP customers. The color is attractive. The pink interior is wild. The plywood feels solid. The tolex is well applied. In the end, I've kept the case as I only need it to transport my LP around in my car. I wouldn't be happy using this as a touring case. This really is a poseur's case. 🙂Chris

It's not the 50's Gibson case, but very close. I have been looking since 1986 for a case like it. Finally being able to obtain it it,is cool. If you are on a budget, get it.Robert

Not much to say about a case, however I can echo what others had said regarding fitment as I was deciding whether or not I would buy it. It fits the guitar absolutely perfectly…no slop, no chaffing or hot spot areas. If you need a case for the 1000 series…this is a no brainer.Mike

I bought this case for my ESP LTD M-400. After two days the interior is falling apart. They use very cheap glue and the felt inside is already loose. The vinyl covering is also very cheap too and I don't think it will be long lasting ether. If you are looking at this case for your ESP guitar don't buy this one. One thing nice about having too many guitars is you can try putting your guitar in many different cases to find the right one. Buy the SKB-66 Deluxe Universal Electric Guitar Case and it will be a perfect fit. The interior is a lot nicer and glue properly. The ESP case grabs the guitar to tight and does not have a recess for the guitar neck. The SKB holds the neck better and does not grab the guitar to tight, but holds the guitar snug when the lid is closed and the TSA latches are latched. It is a much better made guitar case.Donv

Not much to say about a case, however I can echo what others had said regarding fitment as I was deciding whether or not I would buy it. It fits the guitar absolutely perfectly…no slop, no chaffing or hot spot areas. If you need a case for the 1000 series…this is a no brainer.Mike

I bought this case for my ESP LTD M-400. After two days the interior is falling apart. They use very cheap glue and the felt inside is already loose. The vinyl covering is also very cheap too and I don't think it will be long lasting ether. If you are looking at this case for your ESP guitar don't buy this one. One thing nice about having too many guitars is you can try putting your guitar in many different cases to find the right one. Buy the SKB-66 Deluxe Universal Electric Guitar Case and it will be a perfect fit. The interior is a lot nicer and glue properly. The ESP case grabs the guitar to tight and does not have a recess for the guitar neck. The SKB holds the neck better and does not grab the guitar to tight, but holds the guitar snug when the lid is closed and the TSA latches are latched. It is a much better made guitar case.Donv

I expect ES339's to be increasing in popularity because of their physical trimmed down size and pickup options for a true archtop with a centerblock, a la the venerable ES335! Unfortunately with the vast majority of the Epiphone product line being made in Sejung China now, it is just unrealistic to expect Epi/Gibson to continue sourcing those wonderful TKL hardshell cases from Canada. I have had some Japanese- and Korean-made guitars in these cases for between 10 and 15 years, and they have been through you know what and back, with every kind of roadie and stage crew in between. Access cases makes the current versions for Epi(and also Yamaha), and the first and most important thing you notice, which you should when you invest in a hardshell case, is the perfect fit. In all fairness, the plush interior on the Access cases are every bit as thick as the TKL's, but they lack a bit of the plush padding on the underside of the archtop lid, a feature the TKL's that EPI had made did not have. You have to purchase a pro-level TKL case in order to get one with a true archtop lid, and then we're looking at cases averaging twice the price of these. Also on the positive side, these cases do not have an overt glue smell the minute they are opened, which requries them being "aired out" and sprayed down with Fabreze. The two biggest negatives against this particular case are it's availability; they did not ship cases when they started selling guitars, and the initial guitar inventory was almost all pre-sold. They are catching up, and MF is doing a good job of keeping folks posted on the availability. The second negative is price/percentage; I personally just don't believe a decent case should cost 25% or more of the retail you pay for the instrument. Given the fit issues and such, I think the real solution would be to provide the case with the purchase and simply raise the overall price about half of what they are asking for the case. If Yamaha can do it for their acoustics which have unusual fit and size issues, Epiphone with all their unit volume could certainly manage it.arch69er

So…you got a great deal on a 339, and you're looking for a case? This is it. Seriously, this is probably the only option, but the good news it it's a great case: snug, softly-lined, well-constructed, and a solid way to take care of that guitar, so it plays well 10 years down the road. Dog-proof. Kindergartener-proof. Closet-proof. Trunk-proof. Proof that you take your rig seriously. Proof to the stage manager that you want to get around. Proof that you don't mine if your guitar smells of silica. Proof that you understand that a 339 neck is not a bolt-on.Sean

I ordered my Epiphone ES-339 and would not consider moving the guitar around without a case, or even leaving it on a stand in my studio. I read good reviews on the Epiphone hardshell case, and figured this would fit better than some aftermarket cases. I didn't want the guitar moving around or being too tight. I made the right choice. guitar is well protected inside the grey plush interior, storage compartment is small but that's the way it is on these 'profile' style cases. I use a gig bag for chords, accessories, etc. so I was not concerned with a large storage compartment, just maybe enough room for a strap, capo, cleaning cloth, strings, and some picks. This case will do fine, and with the cost point of my Epiphone ES-339 on sale, it is very reasonably priced considering what most cases of this quality cost. There are no noticeable 'bad' odors or chemical smells, maybe like a new car, or new office chair etc. I am very happy with the quality, fit and finish of the case. All hardware/fasteners are securely assembled and look very nice. No loose skin, or broken stitching.John E. Quest

If you have a Wolfgang I would highly recommend this case. I studied all other options for it but because of its unique shape I would only recommend this one!djcjr73

Very well made case with top quality fittings. Delivered well packed in two boxes, I am very pleased with it also PMT price was the best and delivery ahead of promised date.William C.

This is the best of the best when it comes to top quality gig bags. There's a reason top guitarists like Ariel Posen and Matt Schofield use Reunion Blues. If you have a top end guitar it's worth paying the extra to make sure you look after it when on the go.Reviewed by Andertons Music Co.

It is sturdy, lightweight, very comfortable to carry around (I love the two straps), and easy to clean. I took it to my first show, and it protected my guitar really well. I am going to travel with it, and I am leaving my hard case at home.Reviewed by Andertons Music Co.

I Needed to replace my flight case for my Telecaster Deluxe and thought i would try this out. Hot Dog am I pleased I gamble on this. This thing is so durable and secure it is unreal. The movable padding in the base to stop your tail button from smashing is great. The back pack straps seem super sturdy and well built. I can safely say I will be buying another one of these cases for my other guitar, and for all other guitars I buy in the future. I cannot praise this case enough.Christopher C.