Are you looking for the Martin Lx1 Series Acoustic Guitar? If so, you’ve come to the right place.
Choosing the Martin Lx1 Series Acoustic Guitar can be difficult as there are so many considerations. We have done a lot of research to find the top 20 Martin Lx1 Series Acoustic Guitar available.
The average cost is $825.06. Sold comparable range in price from a low of $280.00 to a high of $3499.00.
Based on the research we did, we think Martin LX1E Little Martin Acoustic Guitar w/Gig Bag is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Martin Lx1 Series Acoustic Guitar (20 Sellers)
Product Image | Product Name | Features | Check Price |
---|---|---|---|
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
Reviewers Noted:
Good sound quality . Well made . Durability . Attractive . Weight
Features:
- While the little martin is our smallest guitar, it is very big on tone, quality and versatility.
- Solid sitka spruce top.
- Mahogany high-pressure laminate (hpl) back and sides.
$499.00
4.7
Reviewers Noted:
Good sound quality . Well made . Durability . Attractive . Weight
Features:
- Martin lx1e.
- In ex-demo condition, not a scratch on it.
- These have become the guitars which all travel guitars are judged by, a great little guitar.
$399.00
4.8
Reviewers Noted:
Good sound quality . Well made . Attractive
Features:
- Ray mullin music.
- Our instruments are tuned, cleaned, and cared for daily.
- All instruments are in stored in a humidity and temperature controlled room.
$499.00
4.8
Reviewers Noted:
Well made . Good sound quality . Attractive
Features:
- Little size, big sound
- Sustainable building materials
- Onboard fishman electronics
$439.12
4.8
Reviewers Noted:
Good sound quality . Well made . Attractive
Features:
- The little martin is big on tone, quality, and versatility and includes sustainable wood parts. new to the series, the lx1r features a solid sitka spruce top for warmth and…
Reviewers Noted:
Good sound quality . Well made . Weight . Durable . Attractive
Features:
- Mahogany pattern hpl (high pressure laminate) textured finish, solid sitka spruce top.
- Rust stratabond neck, shortened 3/4 scale.
- Solid morado or east indian rosewood fingerboard.
$280.00
4.8
Reviewers Noted:
Good sound quality . Well made . Weight . Durable . Attractive
Features:
- Used twice.
- Great boxy, punchy sound, that cuts through the mix.
- With stock pickup system.
$299.00
4.8
Reviewers Noted:
Good sound quality . Durability . Visual appeal . Craftsmanship . Weight
Features:
- Nice little guitar in good condition
- Easy to play and travel with
- Comes with original gig bag
Reviewers Noted:
Good sound quality . Well made . Durable . Attractive . Weight
Features:
- Martin djr-10 dreadnought junior like new with original case.
- All solid woods.
- Rarely played if ever.
Reviewers Noted:
Good sound quality . Attractive . Lightweight . Well made . Durable
Features:
- Comes with martin hard case.
- Smoke free and pet free home.
- Light scuffs around the neck from the wall hanger which is to be expected.
Reviewers Noted:
Good sound quality . Attractive . Well made . Lightweight . Durable
Features:
- Excellent condition.
- Gig bag, strap, capo included.
- Perfect travelers guitar or for the little ones rocking out young.
Reviewers Noted:
Good sound quality . Attractive . Well made . Durability . Weight
Features:
- This example is box fresh and still has the reciept in bag from jan 2020.
- Save yourself a £100 from new and treat yourself to a night away with your new guitar (or the wife).
- This lovely guitar has barely been played as shows from having the clear plastic film on the scratch plate.
Reviewers Noted:
Good sound quality . Attractive . Lightweight . Well made . Durable
Features:
- Tested and sounds excellent, full and sweet and maturing nicely.
- Frets have wear.
- Nice mahogany neck.
Reviewers Noted:
Good sound quality . Attractive . Well made . Lightweight . Durable
Features:
- Top, back and sides: koa wood hpl textured finish
- Neck: natural stratabond
- Fretboard: black micarta
$899.00
4.8
Reviewers Noted:
Good sound quality . Attractive . Well made . Durable . Lightweight
Features:
- The guitar pictured is the actual guitar you will receive!
- Just in on trade!
- The performing artist neck with h…
$3499.00
4.9
Reviewers Noted:
Good sound quality . Attractive . Well made . Durability . Weight
Features:
- The m (sometimes referred to as a 0000) is almost the size of a dreadnaught but with the depth of an om.
- The guitar has a strong bass and crystal clear top end along with a balanced and focused midrange.
- This guitar is at home in any collection and perfect for studio, couch or stage!
$399.00
4.8
Reviewers Noted:
Good sound quality . Well made . Weight . Durable . Attractive
Features:
- Ray mullin music.
- Like us on facebookfollow us on [email protected] open, inspect, and test all guitars, effects, amplifiers, etc.
- Our instruments are tuned, cleaned, and cared for daily.
$1799.00
4.6
Reviewers Noted:
Good sound quality . Attractive . Lightweight . Durable . Well made
Features:
- Specifications.
- Body size: s-13 fret cutaway.
- Finish top: gloss.
Reviewers Noted:
Good sound quality . Attractive . Durability . Craftsmanship
Features:
- Sapele top, back, & sides
- Select hardwood neck
- Fsc certified richlite fingerboard
Reviewers Noted:
Good sound quality . Attractive . Durable . Well made . Lightweight
Features:
- Road seriesdrs1
- Dreadnought
- All solid sapele
1. Martin Lx1e Little Martin Acoustic Guitar W/gig Bag

Product Details:
While the little martin is our smallest guitar, it is very big on tone, quality and versatility. the lx1e acoustic electric model features a solid sitka spruce top, mahogany high-pressure laminate (hpl) back and sides, and a warm satin finish. it's ideal for travel, student practice or for just playing around the house or campfire.
Specifications:
Body Size | Modified 0-14 Fret |
Finish Top | Hand-Rubbed |
Construction | Mortise & Tenon Neck Joint |
Bracing Pattern | X-Brace |
Scale Length | 23'' |
Brace Shape | Non-Scalloped |
Fingerboard Width at Nut | 1 11/16'' |
Top Material | Sitka Spruce |
Neck Shape | Modified Low Oval |
Back Material | HPL |
Neck Taper | Standard Taper |
Side Material | HPL |
Electronics | Yes |
Electronics Options | Fishman Sonitone |
Top Color | Clear |
Bridge Style | Junior Style Belly |
Bridge String Spacing | 2 1/8'' |
Bridge Material | FSC Certified Richlite |
Bridge Pin Material | White Plastic |
Bridge Pin Dots | Black Plastic |
Saddle | Compensated White Tusq |
Rosette | Multi-Stripe |
Saddle Radius | 16" |
Brace Material | Sitka Spruce |
Brace Size | 5/16" |
Back Detail | Mahogany Pattern |
Side Detail | Mahogany Pattern |
Neck Material | Rust Birch Laminate |
Fingerboard Material | FSC Certified Richlite |
Finish Neck | Hand-Rubbed |
Fingerboard Width at 12th Fret | 2 1/16'' |
Number of Frets Total | 20 |
Neck Joins Body At | 14th Fret |
Side Dots | White |
Headstock Shape | Solid with LX Taper |
Tuning Machines | Chrome Enclosed Gear |
Headplate Material | HPL |
Knob | Small |
Headplate Logo Style | Script Ink |
Nut Material | White Corian |
Headplate Detail | Rosewood Pattern |
Left Handed Availability | true |
Reviews:
I really liked this little guitar, BUT…I read the reviews and decided to buy in-store so I could play the guitar before buying, and I'm SO glad I did. I went into my local Guitar Center and played THREE of these Martin LX1E guitars, including one that had been specially unboxed so I could try it after two others failed my examination. All three guitars had a very pronounced buzz in the frets. It was not that noticeable when I played them acoustically, but the buzz was very noticeable when I plugged them in to an amp. I even tested the amp with other guitars, to make sure it wasn't the amp. It wasn't. Its a great little guitar, great tone and very playable, BUT my advice would be not to buy this one on-line. Play it first. Play up and down the whole fretboard, and plug it into an amplifier and play again. I have been playing for more than fifty years and have never experienced playing three brand new Martins that were simply not up to snuff. Weird!Tele Playr
The guitar itself can have five stars. Nothing wrong with it. The problem I have is that it is not the old LX1E lefty that Martin used to make and I used to own. It is advertised incorrectly here as containing the Fishman I-sys electronics that contained a volume, base/treble controls and a phasing button for feedback. It also no longer contains the tuner. This is basically the LX1 Little Martin with a Sonitone pickup under the bridge and tone/volume control in the sound hole, which I despise. I prefer the old version where the tuner and controls were on top side (as shown in the picture variety). This needs to be updated!!! I now have no tuner on this guitar when I fully expected one. I would recommend the Little Martin guitar but it needs to be advertised correctly.Jules
I bought this guitar for my son so he can have a smaller guitar to lug around in school. We were surprised when we received the product that the pickup that was installed is a Sonitone pickup instead of what's advertised – an Isys T preamp. The Isys preamp has a tuner, phase and tone control whereas the Sonitone is built into the sound hole and only has the volume and tone control. I brought this up with customer support saying I only wanted the product that I thought we were buying. I received excuses and a repeated offer to return the guitar. We chose to keep it because we need it and like the Martin sound. However MF does not stand up to what they advertise and could not provide a reasonable explanation why the product was switched. Even as I write this review, the description still says it has the Isys pickup. Good luck to future buyers and know that you are buying a different product.Pasigenyo
2. Martin Lx1e Little Martin Acoustic Electric Guitar

Product Details:
Handmade with heavy-duty materials, time-tested styles, and innovative designs, the little martin series delivers classic acoustic guitars that any musician will love to play. these models are made from sustainable wood certified parts and are available in a variety of different wood types, so you can find the solid wood guitar that works best for your playing style and music type—rock, country, folk, bluegrass, jazz, pop, and much more. our little martin series guitars are ideal for beginners and a terrific student model for all ages and ability levels. the smaller acoustic guitar body makes it an ideal travel guitar. take it along to a fireside jam by the lake, or practice just about anywhere. each model delivers distinct features that add personality, performance, and playability to your instrument collection. it is an ideal starter guitar for kids, teens, or adults who want a solid acoustic guitar they can treasure for years to come. for nearly two centuries, martin has been producing premium gear for musical artists across the globe. martins superior guitar and string products remain the choice for musicians around the world for their unrivaled quality, craftsmanship, and tone. still handmade. still the standard. martin guitars are the real deal—not an imitation.
Specifications:
Finish | Natural |
Year | 2003 – 2022 |
Made In | Mexico |
Back Material | High Pressure Laminate |
Body Shape | Travel |
Finish Style | Satin |
Fretboard Material | Composite |
Number of Strings | 6-String |
On-board Electronics | Piezo Pickup |
Right / Left Handed | Right Handed |
Sides Material | High Pressure Laminate |
Top Material | Spruce |
Body type | Modified O-14 Fret |
Cutaway | Non-cutaway |
Top wood | Sitka Spruce |
Bracing pattern | Non scalloped X-type |
Body finish | Hand-rubbed |
Orientation | Right handed Neck |
Neck shape | Modern low oval/PA taper |
Nut width | 1.69" (43 mm) |
Fingerboard | FSC Certified Richlite |
Neck wood | Rust Birch Laminate |
Scale length | 23" |
Number of frets | 20 |
Neck finish | Hand-rubbed |
Pickup/preamp | Yes |
Configuration | Soundhole mounted preamp |
Headstock overlay | High pressure laminate rosewood pattern |
Tuning machines | Chrome Enclosed Gear |
Bridge | FSC Certified Richlite |
Number of strings | 6 |
Reviews:
I really liked this little guitar, BUT…I read the reviews and decided to buy in-store so I could play the guitar before buying, and I'm SO glad I did. I went into my local Guitar Center and played THREE of these Martin LX1E guitars, including one that had been specially unboxed so I could try it after two others failed my examination. All three guitars had a very pronounced buzz in the frets. It was not that noticeable when I played them acoustically, but the buzz was very noticeable when I plugged them in to an amp. I even tested the amp with other guitars, to make sure it wasn't the amp. It wasn't. Its a great little guitar, great tone and very playable, BUT my advice would be not to buy this one on-line. Play it first. Play up and down the whole fretboard, and plug it into an amplifier and play again. I have been playing for more than fifty years and have never experienced playing three brand new Martins that were simply not up to snuff. Weird!Tele Playr
The guitar itself can have five stars. Nothing wrong with it. The problem I have is that it is not the old LX1E lefty that Martin used to make and I used to own. It is advertised incorrectly here as containing the Fishman I-sys electronics that contained a volume, base/treble controls and a phasing button for feedback. It also no longer contains the tuner. This is basically the LX1 Little Martin with a Sonitone pickup under the bridge and tone/volume control in the sound hole, which I despise. I prefer the old version where the tuner and controls were on top side (as shown in the picture variety). This needs to be updated!!! I now have no tuner on this guitar when I fully expected one. I would recommend the Little Martin guitar but it needs to be advertised correctly.Jules
I bought this guitar for my son so he can have a smaller guitar to lug around in school. We were surprised when we received the product that the pickup that was installed is a Sonitone pickup instead of what's advertised – an Isys T preamp. The Isys preamp has a tuner, phase and tone control whereas the Sonitone is built into the sound hole and only has the volume and tone control. I brought this up with customer support saying I only wanted the product that I thought we were buying. I received excuses and a repeated offer to return the guitar. We chose to keep it because we need it and like the Martin sound. However MF does not stand up to what they advertise and could not provide a reasonable explanation why the product was switched. Even as I write this review, the description still says it has the Isys pickup. Good luck to future buyers and know that you are buying a different product.Pasigenyo
3. Martin Lx1r Little Martin Acoustic Guitar

Product Details:
The little martin is big on tone, quality, and versatility. the lx1r version features a solid sitka spruce top for warmth and projection, paired with stylish rosewood pattern hpl (high pressure laminate). other stylish features include a pickguard and a laser-etched herringbone rosette. it comes with a soft gig bag for easy transport, so you can take your music anywhere. the little martin is ideal for travel but also makes a great student guitar.
Specifications:
Construction | Mortise & Tenon Neck Joint |
Body Size | Modified 0-14 Fret |
Top Material | Sitka Spruce |
Rosette | Laser Etched Herringbone |
Bracing Pattern | X Brace |
Brace Shape | Non-Scalloped |
Brace Material | Sitka Spruce |
Brace Size | 5/16" |
Back Material | HPL |
Back Detail | Rosewood Pattern |
Side Material | HPL |
Side Detail | Rosewood Pattern |
Neck Material | Rust Birch Laminate |
Neck Shape | Modified Low Oval |
Neck Taper | Standard Taper |
Plek | No |
Nut Material | White Corian |
Headstock Shape | Solid with LX Taper |
Headplate Material | HPL |
Headplate Logo Style | Script Ink |
Fingerboard Material | FSC Certified Richlite |
Scale Length | 23'' |
Neck Joins Body At | 14th Fret |
Number of Frets Total | 20 |
Fingerboard Width at Nut | 1 11/16'' |
Fingerboard Width at 12th Fret | 2 1/16'' |
Fingerboard Inlay Material | White Plastic |
Fingerboard Inlay Style | Diamonds and Squares Long Pattern |
Side Dots | White |
Finish Top | Hand Rubbed |
Top Color | Clear |
Finish Neck | Hand Rubbed |
Bridge Material | FSC Certified Richlite |
Bridge Style | Junior Style Belly |
Bridge String Spacing | 2 1/8'' |
Saddle | Compensated White Tusq |
Saddle Radius | 16" |
Tuning Machines | Chrome Enclosed Gear |
Recommended Strings | Authentic Acoustic Medium (MA550T) |
Knob | Small |
Bridge Pin Material | White Plastic |
Bridge Pin Dots | Black Plastic |
Pickguard | Faux Tortoise |
Reviews:
Needed a compact guitar with full sound (sailboat dinner cruises – tight space). Plugged in through the board with a chorus pedal sounds as good or better than the full sized guitar I had been using with a lot less passenger head bumping. Easy to play. Quick change battery compartment.Nick
I purchased this guitar to get back into playing during COVID, after selling off my HD-35 and an older LX1 many years ago for personal reasons. Even back then, the LX1 which is nearly the same as this one besides this one handing electronics and a rosewood “paint” job, I often would defer to my LX1 over my HD-35. Part of the reason is the ease of use while still offering a distinct Martin sound, and the design instills confidence that I won’t lose sleep if I ding it or I let a drunk friend play a few tunes. I had that original for many years, and have had this version for about a month. The guitar itself has a surprising amount of heft, and I think many will be surprised by its projection. The solid Sitka spruce top is the mvp here, and should be a must unless you’re concerned about humidity and/or purchasing this style for absolute travel readiness. The solid top will hold up well in changing climates and travel, but the HPL top of the standard LX may be a safer bet if that is a concern. I think most people will benefit from solid top, so that’s my suggestion, plus you get that Martin smell, albeit faintly, with the solid top. Playability-wise, the guitar is clear and punchy while playing fingerstyle or doing solo runs, and strumming offers a surprising amount of boom and clarity. The only caveat is the transition or light strumming to full strumming, as it seems the guitar needs to rev up a bit to get into its full potential. However that could be some of my cobwebs I’m still throwing off. I’ve only used the onboard electronics is few times and they are about what you’d expect from a guitar in this price range. The plugin is on the lower bout near where the guitar sits on your right leg, and is powered by a 9v. Two control dials are available through the sound hole, and overall reproduce the guitar well enough, but a secondary EQ will most likely be required for serious production/recording… works great for just throwing down a songwriting session though! To round it off, the guitar comes with an included soft gig bag, which can be worn as a backpack or hand carried. Which is something I love, it also has a large pocket for whatever small items you may need. And the guitar comes with a 1 year Martin warranty, which should be enough to weed out any manufacturing defects. Overall, I am proud to have this guitar back in my hands, and love the durability, ease of use, value, and most surprisingly the sound of this guitar. This is truly a great guitar and is a lot of fun to bring everywhere!Dan K
I bought this guitar on musicstore from France. First, it price was the lowest I found on the internet, and even if it was shipped from Germany, it was delivered to me very fast (2-3 days). The packaging was clean. I got a gig bag as expected, and I was surprised they gave me a Martin&Co strap ! This guitar is all I expected from it. I had already tried a LXK2 and I heard it had the same sound LX1 (same materials). When its plugged on a power amplifier, it makes it even better ! I bought it because Ed Sheeran had it, and I knew it was a good one, now I can make cover of him, and it sounds beautiful ! I recommend this guitar and this website ! Ps : Im not a professional.
4. Martin Lx1re Little Martin Acoustic-Electric Guitar, Left-Handed

Product Details:
The martin little martin is big on tone, quality, and versatility and includes sustainable wood parts. the lx1re features a solid sitka spruce top, for warmth and projection, paired with stylish rosewood pattern hpl. as the first model in its series with a pickguard, it includes a laser-etched herringbone rosette and comes with a soft gig bag for easy transport so you can take your music anywhere. the little martin is ideal for travel but also makes a great student guitar. the lx1re comes equipped with fishman sonitone electronics.
Specifications:
Construction | Mortise & Tenon Neck Joint |
Body Size | Modified 0-14 Fret |
Top Material | Sitka Spruce |
Rosette Laser | Etched Herringbone |
Bracing Pattern | X Brace |
Brace Shape | Non-Scalloped |
Brace Material | Sitka Spruce |
Brace Size | 5/16" |
Back Material | HPL |
Back Detail | Rosewood Pattern |
Side Material | HPL |
Side Detail | Rosewood Pattern |
Neck Material | Rust Birch Laminate |
Neck Shape | Modified Low Oval |
Neck Taper | Standard Taper |
Nut Material | White Corian |
Headstock Shape | Solid with LX Taper |
Headplate Material | HPL |
Headplate Logo Style | Script Ink |
Fingerboard Material | FSC Certified Richlite |
Scale Length | 23" |
Neck Joins Body At | 14th Fret |
Number of Frets Total | 20 |
Fingerboard Width at Nut | 1 11/16" |
Fingerboard Width at 12th Fret | 2 1/16" |
Fingerboard Inlay Material | White Plastic |
Fingerboard Inlay Style | Diamonds and Squares Long Pattern |
Side Dots | White |
Finish Top | Hand Rubbed |
Top Color | Clear |
Finish Neck | Hand Rubbed |
Bridge Material | FSC Certified Richlite |
Bridge Style | Junior Style Belly |
Bridge String Spacing | 2 1/8" |
Saddle | Compensated White Tusq |
Saddle Radius | 16" |
Tuning Machines | Chrome Enclosed Gear |
Recommended Strings | Authentic Acoustic Medium (MA550T) |
Knob | Small |
Bridge Pin Material | White Plastic |
Bridge Pin Dots | Black Plastic |
Pickguard | Faux Tortoise |
Electronics | Fishman Sonitone |
Manufacturer Part Number (MPN) | MAT LX1RELH |
Reviews:
Needed a compact guitar with full sound (sailboat dinner cruises – tight space). Plugged in through the board with a chorus pedal sounds as good or better than the full sized guitar I had been using with a lot less passenger head bumping. Easy to play. Quick change battery compartment.Nick
I purchased this guitar to get back into playing during COVID, after selling off my HD-35 and an older LX1 many years ago for personal reasons. Even back then, the LX1 which is nearly the same as this one besides this one handing electronics and a rosewood “paint” job, I often would defer to my LX1 over my HD-35. Part of the reason is the ease of use while still offering a distinct Martin sound, and the design instills confidence that I won’t lose sleep if I ding it or I let a drunk friend play a few tunes. I had that original for many years, and have had this version for about a month. The guitar itself has a surprising amount of heft, and I think many will be surprised by its projection. The solid Sitka spruce top is the mvp here, and should be a must unless you’re concerned about humidity and/or purchasing this style for absolute travel readiness. The solid top will hold up well in changing climates and travel, but the HPL top of the standard LX may be a safer bet if that is a concern. I think most people will benefit from solid top, so that’s my suggestion, plus you get that Martin smell, albeit faintly, with the solid top. Playability-wise, the guitar is clear and punchy while playing fingerstyle or doing solo runs, and strumming offers a surprising amount of boom and clarity. The only caveat is the transition or light strumming to full strumming, as it seems the guitar needs to rev up a bit to get into its full potential. However that could be some of my cobwebs I’m still throwing off. I’ve only used the onboard electronics is few times and they are about what you’d expect from a guitar in this price range. The plugin is on the lower bout near where the guitar sits on your right leg, and is powered by a 9v. Two control dials are available through the sound hole, and overall reproduce the guitar well enough, but a secondary EQ will most likely be required for serious production/recording… works great for just throwing down a songwriting session though! To round it off, the guitar comes with an included soft gig bag, which can be worn as a backpack or hand carried. Which is something I love, it also has a large pocket for whatever small items you may need. And the guitar comes with a 1 year Martin warranty, which should be enough to weed out any manufacturing defects. Overall, I am proud to have this guitar back in my hands, and love the durability, ease of use, value, and most surprisingly the sound of this guitar. This is truly a great guitar and is a lot of fun to bring everywhere!Dan K
I bought this guitar on musicstore from France. First, it price was the lowest I found on the internet, and even if it was shipped from Germany, it was delivered to me very fast (2-3 days). The packaging was clean. I got a gig bag as expected, and I was surprised they gave me a Martin&Co strap ! This guitar is all I expected from it. I had already tried a LXK2 and I heard it had the same sound LX1 (same materials). When its plugged on a power amplifier, it makes it even better ! I bought it because Ed Sheeran had it, and I knew it was a good one, now I can make cover of him, and it sounds beautiful ! I recommend this guitar and this website ! Ps : Im not a professional.
5. Martin Lx1re Little Martin Acoustic Guitar

Product Details:
The little martin is big on tone, quality, and versatility and includes sustainable wood parts. new to the series, the lx1r features a solid sitka spruce top for warmth and projection, paired with stylish rosewood pattern hpl. as the first model in its series with a pickguard, it also includes a laser-etched herringbone rosette and comes with a soft gig bag for easy transport so you can take your music anywhere. the little martin is ideal for travel but also makes a great student guitar. available at ken stanton music.
Specifications:
Finish | Natural |
Year | 2019 – 2022 |
Made In | Mexico |
Back Material | High Pressure Laminate |
Body Shape | Travel |
Finish Style | Satin |
Fretboard Material | Composite |
Number of Strings | 6-String |
On-board Electronics | Piezo Pickup |
Right / Left Handed | Right Handed |
Sides Material | High Pressure Laminate |
Top Material | Spruce |
Reviews:
Needed a compact guitar with full sound (sailboat dinner cruises – tight space). Plugged in through the board with a chorus pedal sounds as good or better than the full sized guitar I had been using with a lot less passenger head bumping. Easy to play. Quick change battery compartment.Nick
I purchased this guitar to get back into playing during COVID, after selling off my HD-35 and an older LX1 many years ago for personal reasons. Even back then, the LX1 which is nearly the same as this one besides this one handing electronics and a rosewood “paint” job, I often would defer to my LX1 over my HD-35. Part of the reason is the ease of use while still offering a distinct Martin sound, and the design instills confidence that I won’t lose sleep if I ding it or I let a drunk friend play a few tunes. I had that original for many years, and have had this version for about a month. The guitar itself has a surprising amount of heft, and I think many will be surprised by its projection. The solid Sitka spruce top is the mvp here, and should be a must unless you’re concerned about humidity and/or purchasing this style for absolute travel readiness. The solid top will hold up well in changing climates and travel, but the HPL top of the standard LX may be a safer bet if that is a concern. I think most people will benefit from solid top, so that’s my suggestion, plus you get that Martin smell, albeit faintly, with the solid top. Playability-wise, the guitar is clear and punchy while playing fingerstyle or doing solo runs, and strumming offers a surprising amount of boom and clarity. The only caveat is the transition or light strumming to full strumming, as it seems the guitar needs to rev up a bit to get into its full potential. However that could be some of my cobwebs I’m still throwing off. I’ve only used the onboard electronics is few times and they are about what you’d expect from a guitar in this price range. The plugin is on the lower bout near where the guitar sits on your right leg, and is powered by a 9v. Two control dials are available through the sound hole, and overall reproduce the guitar well enough, but a secondary EQ will most likely be required for serious production/recording… works great for just throwing down a songwriting session though! To round it off, the guitar comes with an included soft gig bag, which can be worn as a backpack or hand carried. Which is something I love, it also has a large pocket for whatever small items you may need. And the guitar comes with a 1 year Martin warranty, which should be enough to weed out any manufacturing defects. Overall, I am proud to have this guitar back in my hands, and love the durability, ease of use, value, and most surprisingly the sound of this guitar. This is truly a great guitar and is a lot of fun to bring everywhere!Dan K
I bought this guitar on musicstore from France. First, it price was the lowest I found on the internet, and even if it was shipped from Germany, it was delivered to me very fast (2-3 days). The packaging was clean. I got a gig bag as expected, and I was surprised they gave me a Martin&Co strap ! This guitar is all I expected from it. I had already tried a LXK2 and I heard it had the same sound LX1 (same materials). When its plugged on a power amplifier, it makes it even better ! I bought it because Ed Sheeran had it, and I knew it was a good one, now I can make cover of him, and it sounds beautiful ! I recommend this guitar and this website ! Ps : Im not a professional.
6. Martin Lx1 Little Martin Left Handed Acoustic Guitar

Product Details:
Martin little martin series travel-size left handed acoustic guitar w/bag (lx1l) while the little martin is the smallest guitar, it is very big on tone, quality and versatility. the lx1 model features a solid sitka spruce top and mahogany high-pressure laminate hpl back, sides and top. it’s ideal for travel, student practice or for just playing around the house or campfire. the martin lx1 little martin acoustic guitar is perfect for beginners or an ideal travel-size guitar. with a solid sitka spruce top and modified 0-14 body, the lx1 doesn’t compromise its tight, rich tone despite its smaller size. also featured are solid east indian rosewood fretboard and bridge, 23 inch scale, stratabond modified low-oval neck, and martin's patented mortise/tenon neck joint. padded gig bag included. martin lx1 little martin acoustic guitar perfect for beginners or ideal travel-size guitar solid sitka spruce top tight, rich tone solid east indian rosewood fretboard and bridge martin’s patented nortise/tenon neck joint gig bag included model: lx1 little martin construction: mortise/tenon neck joint body size: modified 0-14 fret top: solid sitka spruce rosette: multiple black/white boltaron with red fiber top bracing pattern: modified x series ''x'' top braces: crowned cross brace back material: mahogany pattern hpl textured finish back purfling: none side material: mahogany pattern hpl textured finish endpiece: none binding: none top inlay style: none side inlay: none back inlay: none neck material: rust stratabond neck shape: modified low oval nut material: white corian headstock: solid/lx taper headplate: mahogany pattern hpl heelcap: none fingerboard material: richlite scale length: 23'' number of frets clear: 14 number of frets total: 20 fingerboard width at nut: 1-11/16'' fingerboard width at 12th fret: 2-1/16'' fingerboard position inlays: none fingerboard binding: none finish back & sides: none finish top: hand rubbed finish finish neck: none bridge material: richlite bridge style: belly bridge string spacing: 2-1/8'' saddle: 16'' radius/compensated/white tusq tuning machines: chrome w/ small buttons recommended strings: martin sp lifespan phosphor bronze medium gauge (msp7200) bridge & end pins: white w/ black dots pickguard: none case: padded gig bag interior label: black foil label
Specifications:
CONSTRUCTION | Mortise/Tenon Neck Joint |
BODY SIZE | Modified O – 14 Fret |
ROSETTE | Inlaid Boltaron w/ Red Fiber |
TOP BRACING PATTERN | Modified X Series "X" |
TOP BRACES | Crowned Cross Brace & Graphite Bowtie Plate |
BACK MATERIAL | Mahogany Pattern HPL Textured Finish |
SIDE MATERIAL | Mahogany Pattern HPL Textured Finish |
NECK MATERIAL | Rust Stratabond |
NECK SHAPE | Modified Low Oval |
NUT MATERIAL | White Corian |
HEADSTOCK | Solid/Square Taper |
HEADPLATE | Mahogany Pattern HPL w/ Printed Logo |
FINGERBOARD MATERIAL | Solid Morado |
SCALE LENGTH | 23'' |
FINGERBOARD WIDTH AT NUT | 1-11/16'' |
FINGERBOARD WIDTH AT 12TH FRET | 2-1/16'' |
FINISH TOP | Hand Rubbed Finish |
BRIDGE MATERIAL | Morado |
BRIDGE STYLE | Belly |
BRIDGE STRING SPACING | 2-1/8'' |
SADDLE | 16'' Radius/Compensated/White Tusq |
TUNING MACHINES | Chrome w/ Small Knobs |
RECOMMENDED STRINGS | Martin M550 Phosphor Bronze |
Reviews:
I haven't played in a few years but the pandemic had me searching for something to get my mind off working crazy hours. There would be few guitars I'd buy sight unseen but I rolled the dice because I'd played Martin's first backpacking incarnation and was familiar with their quality. This little guitar wouldn't disappoint! It is a smaller scale but my fingers fit on the fret board and it's easy to just leave out and pick up when you need it. The sound is really good for the size and it's easy to strum or pick. It was exactly what I was looking for but a little more. I honestly didn't expect to be this happy with how much guitar I got for the price. If you need something to stick by the desk or play by the fire, this is a good optionBob
it arrived yesterday to romania, from music store germany (thanks for handling it with so much care!) and i laid my hands for the first time on this loveable tiny beauty. it looks amazing and feels amazing, in every aspect. excellent playability all thourghout the neck, right out of the box… i wanted a travel buddy — small, sturdy, light and playable… and here she is. there are a lot reviews on the net, i will let here my own subjective opinion, after one day of having it (shipped from music store, germany). – i'm a tall guy (6 feet 3 / 190 cm), but the smallness of martin lx1 is not a hindrance in playing. my wife is a mongolian petite, so perhaps I'm used with handling small beauties 🙂 – i have big hands, but not thick fingers. if i stretch my fingers i can cover this guitar's neck from the net to the 10th fret (from pinky to thumb stretched out) — so you can have a clue; however, i feel comfortable playing all over the neck, even past the 14th fret. so no problem with that… and the transition back and forth to my normal-sized acoustic fender pm1 or to my electric squier affinity tele feels smooth, adjusting in no time. – the guitar is neck heavy, but it doesn't bother me at all; you see, it sits comfortably in my lap. – well, of course, the sound is not of a normal-sized guitar — one has to live with that. it is somehow a boxy sound, but martin has a lot of character, so i'm quite pleased with the sound. the guitar seems to suit better for fingerpicking or strumming with bare fingers; when i use my pick it's too noisy, especially the d string is sooo loud, taking over the other strings. in know, it's a new guitar, freshly out of its box, so perhaps it needs time to shape its sound. if this will not happen (due to hpl back and sides) i will still be pleased, the sound is good enough and i can work my way around. – the machine heads are of excellent quality (like every aspect of this guitar, actually): i tuned the guitar yesterday, after taking it out of the box, then forgot about it… summing up: craftmanship — state of the art sound — boxy, you may like it or not (martin has character, a distinct voice, above all) optic — beautiful as it gets, simply perfect price/performance — well, i would have loved to pay less… in the states, it was 399 USD until recently, now it's more expensive and perhaps the price will rise as well in the current covid situation; so buy know, don't postpone if you consider having one.
I played a friend's dreadnaught sized Martin and fell in love. I already owned two other guitars at the time (Samick and a Fender Redondo Player acoustic) and I didn't want to spend the money in a Martin at this time. This happened to pop up as a stupid deal of the day and so I bought. I wasn't sure about the laminate at first, but it feels and plays like a well made guitar. It sounds bright and it is a tone I enjoy hearing. If someone had given me advice as a new player I would have wished they told me about this guitar. It is concert size so it is a little smaller than a dreadnaught. It is easier for me to practice barring chords and doesn't feel as awkward on my body as my dreadnaught. I love both guitars, but I definitely still use this one as I advance as a player. I noodle on it when I am watching tv, take it when I go way for the weekend, and bring it to play for my friends. This is a fantastic guitar and I can proudly say I own a Martin :).RockstarAsh
7. Martin Lxme Little Martin Acoustic Electric Guitar

Product Details:
I bought it new and enjoyed this guitar very much especially finding myself playing things that i've never played before because of its healthy deep rich tone. the sound it has is remarkable. i also have a very nice gig bag specially made for it that has extra carrying straps to be worn as a back pack. it is in perfect condition and the artwork was put on with felt tip pens and coated with a matt clear to preserve them. the artist, "the magician" does specialty paint work for over forty years mainly with airbrush on motorcycles, cars, guitars etc. and signed it. he also does tattoo work. if you never played one of these guitars i urge you to try one out, they are truly amazing. i have to say that this guitar is one that stays in tune, day after day.
Specifications:
Finish Details | Original |
Body Details | HPL back, sides, and top |
Fingerboard Material | Morado |
Neck Profile | "C" profile |
Neck Thickness (IN) | .83" (1st fret), .91" (10th fret) |
Fingerboard Radius | 16.00" |
Nut Width | 43.00 mm |
Scale Length | 23 |
Electronics | Original Fishman Sonitone electronics |
Case Details | Hardshell case |
Serial Number | MG3701 |
Finish | Natural |
Year | 2003 – 2018 |
Made In | Mexico |
Back Material | High Pressure Laminate |
Body Shape | Travel |
Finish Style | Satin |
Fretboard Material | Composite |
Number of Strings | 6-String |
On-board Electronics | Piezo Pickup |
Right / Left Handed | Right Handed |
Sides Material | High Pressure Laminate |
Top Material | High Pressure Laminate |
Reviews:
I haven't played in a few years but the pandemic had me searching for something to get my mind off working crazy hours. There would be few guitars I'd buy sight unseen but I rolled the dice because I'd played Martin's first backpacking incarnation and was familiar with their quality. This little guitar wouldn't disappoint! It is a smaller scale but my fingers fit on the fret board and it's easy to just leave out and pick up when you need it. The sound is really good for the size and it's easy to strum or pick. It was exactly what I was looking for but a little more. I honestly didn't expect to be this happy with how much guitar I got for the price. If you need something to stick by the desk or play by the fire, this is a good optionBob
it arrived yesterday to romania, from music store germany (thanks for handling it with so much care!) and i laid my hands for the first time on this loveable tiny beauty. it looks amazing and feels amazing, in every aspect. excellent playability all thourghout the neck, right out of the box… i wanted a travel buddy — small, sturdy, light and playable… and here she is. there are a lot reviews on the net, i will let here my own subjective opinion, after one day of having it (shipped from music store, germany). – i'm a tall guy (6 feet 3 / 190 cm), but the smallness of martin lx1 is not a hindrance in playing. my wife is a mongolian petite, so perhaps I'm used with handling small beauties 🙂 – i have big hands, but not thick fingers. if i stretch my fingers i can cover this guitar's neck from the net to the 10th fret (from pinky to thumb stretched out) — so you can have a clue; however, i feel comfortable playing all over the neck, even past the 14th fret. so no problem with that… and the transition back and forth to my normal-sized acoustic fender pm1 or to my electric squier affinity tele feels smooth, adjusting in no time. – the guitar is neck heavy, but it doesn't bother me at all; you see, it sits comfortably in my lap. – well, of course, the sound is not of a normal-sized guitar — one has to live with that. it is somehow a boxy sound, but martin has a lot of character, so i'm quite pleased with the sound. the guitar seems to suit better for fingerpicking or strumming with bare fingers; when i use my pick it's too noisy, especially the d string is sooo loud, taking over the other strings. in know, it's a new guitar, freshly out of its box, so perhaps it needs time to shape its sound. if this will not happen (due to hpl back and sides) i will still be pleased, the sound is good enough and i can work my way around. – the machine heads are of excellent quality (like every aspect of this guitar, actually): i tuned the guitar yesterday, after taking it out of the box, then forgot about it… summing up: craftmanship — state of the art sound — boxy, you may like it or not (martin has character, a distinct voice, above all) optic — beautiful as it gets, simply perfect price/performance — well, i would have loved to pay less… in the states, it was 399 USD until recently, now it's more expensive and perhaps the price will rise as well in the current covid situation; so buy know, don't postpone if you consider having one.
I played a friend's dreadnaught sized Martin and fell in love. I already owned two other guitars at the time (Samick and a Fender Redondo Player acoustic) and I didn't want to spend the money in a Martin at this time. This happened to pop up as a stupid deal of the day and so I bought. I wasn't sure about the laminate at first, but it feels and plays like a well made guitar. It sounds bright and it is a tone I enjoy hearing. If someone had given me advice as a new player I would have wished they told me about this guitar. It is concert size so it is a little smaller than a dreadnaught. It is easier for me to practice barring chords and doesn't feel as awkward on my body as my dreadnaught. I love both guitars, but I definitely still use this one as I advance as a player. I noodle on it when I am watching tv, take it when I go way for the weekend, and bring it to play for my friends. This is a fantastic guitar and I can proudly say I own a Martin :).RockstarAsh
8. Martin Lxm Little Martin Acoustic Guitar – Natural

Product Details:
The martin lxm "little martin" acoustic guitar is a perfect choice for travel, practice, and beginning students. gotoh nickel-plated tuners and c.f. martin script logo adorn the headstock. the lxm includes martin heavily padded gig bag. modified 0-14 martin body. wood-pattern hpl top. "1-style" sitka spruce bracing. micarta fretboard and bridge. 23" scale. stratabond modified low-oval neck. martin's patented neck mortise. gotoh nickel-plated tuners. martin script logo on headstock. includes martin padded gig bag.
Specifications:
Reviews:
I was looking for a small guitar to practice with when I travel. The big dread takes up too much space so the small LX makes sense. Even my wife was good with me getting another guitar, imagine that! Anyway, sounds good, plays great like a Martin should. Made in Mexico and of high-pressure laminate it should not be affected by humidity or lack there of. I feel like it is a great value for the money. I even find myself picking it up around the house more often than my other guitars because the smaller size makes it comfortable on the couch. Buy it, you wont regret it.xrayman8
This is a sweet little guitar and it's not just for kids. I have trouble with my shoulders, so holding this is not a problem, like it would be with a larger guitar, for long periods of time during practicing. It should not be expected to have the same big volume as any full size performance guitar, but it has a good depth of tone, and is just plain fun to play. It is sturdy and stays remarkably in tune for long periods of time, which is surprising. I have owned this guitar for over 5 years now, and it is no worse for the wear. Love it!Blaise
This is my third Little Martin. I love the sound plugged and unplugged. I am a therapist for children on the Autism spectrum and other special needs children and music seems, in many cases, seems to pause the child's disability and let them attend with great eye contact and focus. Children who are verbally limited sing songs (e.g., Wheels on the Bus, Old MacDonald etc…) and in that moment you see that child smile/and or laugh and learn, and thats what its all about. My Martin's are my weapon to battle Autism and all disabilities that plague our young children.Frank
9. Martin Djr-10 Sitka Dreadnought Junior Acoustic Guitar

Product Details:
The dreadnought junior is designed for players looking for big dreadnought sound in a slightly smaller body. the newly updated djr features satin finished sapele back and sides in a rich cherry hue, satin finished sitka spruce top, and a hand-rubbed neck with a high-performance taper. this model also sports a thinner 000 body depth with softer back edges to provide maximum comfort while playing. every junior includes a soft gig bag for easy transport. this model is an updated version of the discontinued d jr.
Specifications:
Construction | Mortise & Tenon Neck Joint |
Body Size | D Junior-14 Fret (000 Depth) |
Top Material | Sitka Spruce |
Rosette | MOP Pattern with Multi-Stripe |
Bracing Pattern | X Brace |
Brace Shape | Scalloped |
Brace Material | Sitka Spruce |
Brace Size | 1/4 inch |
Back Material | Sapele |
Side Material | Sapele |
Binding | Black |
Top Inlay Material | Multi-Stripe |
Neck Material | Select Hardwood |
Neck Shape | Dreadnought Junior |
Neck Taper | High Performance Taper |
Plek | Yes |
Nut Material | White Corian |
Headstock Shape | Solid with Dreadnought Junior Taper |
Headplate Material | HPL |
Headplate Logo Style | Script Ink |
Fingerboard Material | FSCA Certified Richlite |
Scale Length | 24 inches |
Neck Joins Body At | 14th Fret |
Number of Frets Total | 20 |
Fingerboard Width at Nut | 1 3/4 inches |
Fingerboard Width at 12th Fret | 2 1/8 inches |
Fingerboard Inlay Material | MOP Pattern |
Fingerboard Inlay Style | MOP Pattern Dots- 28 Style Pattern |
Side Dots | White |
Back and Side Finish | Satin |
Back and Sides Color | Cherry |
Finish Top | Satin |
Top Color | Clear |
Finish Neck | Hand Rubbed |
Bridge Material | FSCA Certified Richlite |
Bridge Style | Junior Style Belly |
Bridge String Spacing | 2 5/32 inches |
Saddle | Compensated White Tusq |
Saddle Radius | 16 inches |
Tuning Machines | Chrome Enclosed Gear |
Recommended Strings | RETRO LIGHT (MM12) |
Knob | Small |
Bridge Pin Material | White Plastic |
Bridge Pin Dots | Black Plastic |
Pickguard | Faux Tortoise |
Reviews:
At 73, I've had some kind of inexpensive guitar or other since high school, occasionally playing some 3 or 4 chord folk, cowboy, or campfire tunes. My guitar since about 2000 has been an Ibanez PF10 NT. It sounded pretty good to me over the years. Then a few of my older grand kids (about 9 through 16 years old) took up ukuleles and guitars and quickly got pretty darned good. So I decided I'd start playing more and do some jamming with them. Just strolling through Guitar Center one afternoon, I notice this little Martin hanging out with the less expensive guitars. I had been out of the loop as to what Martin had been up to for years. I'd lusted for one since I can remember. I pick it up and see that it's only $499, got to be a mistake. Back in my day, the Martins I knew of cost thousands. Anyway, I strum it and almost swoon it sounds so pretty. I sit and play it for a while and figure I still can't really spend 500 on a guitar. Well, about 3 days later I bought one and have only put it down to sleep and eat ever since. (Slight exaggeration.) The dreadnought junior 10 is fun and easy to play, and it sounds great. So I'm using it to learn to play the neck and do more finger picking and trying to keep myself from buying another Martin. If one this little gem is so good, how great are the one's for say $1800?Mark TM
Fantastic guitar with a better sound than I expected from a downsized dreadnought. Because of it’s smaller size, I find it’s easier to pick up and start strumming away, even though I have a Maton dreadnought as well. Could be the novelty factor but I am enjoying the Martin sound. Would recommend this guitar to anyone.Leo S.
I recently bought my first Martin guitar, a 2019 0-18 which is retail at $2500. Absolutely love the guitar and cant put it down. I work half my time in another state where I cant take my 0-18 so I bought Dreadnought Jr as a jam guitar for my apartment there. Have to say this guitar is almost as fun to play. At 20% of the cost you still get an all-wood, hand made Martin. Its not US made of course but still a quality guitar. I have as much fun playing this as my 0-18. They are both about the same size and fun to play. If you are a serious beginner or a seasoned pro, this will fit the bill as a good jam guitar with the great Martin tone and playability.reg3181
10. Martin 00015m Mahogany Acoustic Guitar With Case, Natural

Product Details:
Made in martin's nazareth, pennsylvania factory, the d-15m burst is constructed with genuine mahogany top, back, sides and neck, is accented with beautifully toned pre-war mahogany top shading. included a hard shell case and martin lifetime warranty. martin d-15m burst solid mahogany acoustic guitar size – dreadnought 14 fret mpn. d-15m burst construction – simple dovetail neck joint top. solid genuine mahogany back and sides. solid genuine mahogany finish. satin neck material. solid genuine mahogany neck shape. modified low oval nut width – 1-11/16". scale length – 25.4" tuning machines. nickel open geared with butterbean knobs fingerboard & bridge material. morado nut. bone strings. martin sp lifespan phosphor bronze medium gauge (msp7200). includes martin 345 hard case.
Specifications:
CONSTRUCTION | Simple Dovetail Neck Joint |
BODY SIZE | 000-14 Fret |
TOP MATERIAL | Mahogany |
BRACING PATTERN | X Brace |
BRACE SHAPE | Non-Scalloped |
BRACE MATERIAL | Sitka Spruce |
BRACE SIZE | 5/16" |
BACK MATERIAL | Mahogany |
NECK MATERIAL | Mahogany |
NECK SHAPE | Modified Low Oval |
NUT MATERIAL | Bone |
HEADSTOCK SHAPE | Solid with Square Taper |
HEADPLATE MATERIAL | East Indian Rosewood |
HEADPLATE LOGO STYLE | Script Old Style Overlay |
FINGERBOARD MATERIAL | East Indian Rosewood |
SCALE LENGTH | 25.4'' |
NUMBER OF FRETS TOTAL | 20 |
FINGERBOARD INLAY MATERIAL | Abalone |
Style | Orchestra (om) |
Electronics | No |
Top Wood | Mahogany |
Back/Side Wood | Mahogany, Mahogany back/sides |
Scale Length | Standard scale |
Fret to Body | 14 fret |
Nut Width | 1 11/16" |
Case Included | Yes |
Reviews:
Overall: Played one 10 or so years ago but didn’t get because of other obligations. Never forgot how it played and sounded! Finally got one and it is a truly excellent guitar. I have a Gibson CJ165EC, which I love, and the 000-15M is a totally different sound, which I wanted. Needed some Martin jangle! Out of the box fantastic. The mahogany tone is unmistakable and rich! Neck is a thin Martin neck, which I’m fine with. I’ve been playing for 53+ years so I kinda know what I’m talking about. Putting in a Fishman rate earth soundhole pickup and this will be my busking guitar! Really happy with the guitar and with zZounds. Delivery was fast and purchase was flawless. Highly recommend both the Martin 000-15M and zZounds!!Reverend
I ordered this online after discussing the purchase with Sam Ash Staff, it was in short supply, they scouted all Sam Ash Stores, they found one and it arrived two weeks early just after christmas. My wife loves it! It's her 2nd Martin Guitar and this one is her prize instrument. The staff at our local store were really helpful both with the Order process and preparing the the guitar upon arrival at the store. I asked about the 1st year instrument maintenance option and they were able to update our purchase to include that. The guitar sounds great, my wife loves playing it even though she is a novice. Totally satisfied with the instrument and the staff that helped obtain it. Thanks guys.Britinusa
I have wanted a triple-aught mahogany guitar. I preferred the Guild D20 dread to the Martin D15, but was open-minded about which 000 brand. Didn't like videos on Taylor and Alvarez all hog orchestra models and was very impressed with the Martin videos. So ordered this. Was also a big fan of Kenneth Pattengale and I'm With Her who use the 00-15 model. Let the box sit half a day. Upon opening it I was greeted by this amazing scent. The guitar came set up with low action, slightly detuned. The bridge and fretboard appeared to be stained morado (a very hard and valid wood, harder than rosewood but not quite as much as ebony). Tuners are Grover Statites. They are firm and perhaps a little too sensitive to sometimes dial in. The body was a gorgeous chocolate with amber-orange highlights. The guitar was immaculate. Martin Lifespan 2.0 PB 12-54 strings. It sounded really nice with the ebony pins which were fit absolutely perfectly. However, I had already purchased Blisstime unbleached bone pins which fit perfectly too. I got even more sustain and a more melodic tone, along with greater volume. This improved the strumming tone immensely. May switch to nickel-bronze 12-56 strings, but I will wait for now. The guitar is super-light and weird to hold after dreads. The tone is dark (as expected) but ringing. There is the hog compression, but I was amazed how great this sounded brand new. I did humidity it overnight. Intonation was spot on. The frets were dressed wonderfully with no protruding ends. No truss rod wrench, nor polishing cloth like with my DSS-17. The case had a small ding in the tolex which I was able to bond into place cleanly and disguise. The case is very nice, but without built-in humidification like my Guild. The tone is beautifully even and not bass-heavy like the D15. The treble keeps up with the expected mids. The end pin was not pushed in all the way by me as it was very tight. May opt to have that professionally assessed. I don't gig, so a pickup is not for me. I did get a tortoise pickguard. This is definitely a keeper which I will pamper.Tom
11. Martin Lxk2 Little Martin Koa Acoustic Guitar

Product Details:
This is the lxk2 little martin acoustic guitar.23"scale length, 1-11/16"nut, 16"radius. the smaller 'modified 0-14 fret'body makes this guitar perfect for travel. the body is made from hpl (high pressure laminate) koa wood that keeps the guitar strong and provides great tone at the same time. the stratabond neck is a comfortable 'modified low oval'shape and feels great. with a richlite fretboard, you won't have to worry about the wood shrinking and swelling when travilling with this great guitar like a normal neck. this guitar is the perfect travel guitar – small, lightweight, and great acoustic tone. the koa wood in the lxk2 really brings out a warm, pleasing tone from the guitar compared to some of the other models. bring it to the beach, on the road, or anywhere else you can think of.this guitar even comes with a padded martin gig bag that will keep this safe wherever it goes. buy with confidence. don't pass this by!
Specifications:
Construction | Mortise/Tenon Neck Joint |
Body Size | Modified 0-14 Fret |
Rosette | Herringbone Style – Gold & Black |
Top Bracing Pattern | Modified X Series ''X'' |
Top Braces | Crowned Cross Brace |
Back Material | Koa Wood Pattern HPL Textured Finish |
Side Material | Koa Wood Pattern HPL Textured Finish |
Neck Material | Natural Stratabond |
Neck Shape | Modified Low Oval |
Nut Material | White Corian |
Headstock | Solid/LX Taper |
Headplate | Koa Wood Pattern HPL |
Fingerboard Material | Richlite |
Scale Length | 23'' |
Number Of Frets Clear | 14 |
Number Of Frets Total | 20 |
Fingerboard Width At Nut | 1-11/16'' |
Fingerboard Width At 12th Fret | 2-1/16'' |
Bridge Material | Richlite |
Bridge Style | Belly |
Bridge String Spacing | 2-1/8'' |
Saddle | 16'' Radius/Compensated/White Tusq |
Tuning Machines | Chrome w/ Small Buttons |
Interior Label | Gold Foil |
Reviews:
I am a petite female and love the size of this Martin Little! I had considered purchasing a baritone ukulele with 6 strings because I wanted a very small body. The Little is larger than a baritone uke but is still within the range of PERFECT and came with an acoustic/electric option so I can jam! I have larger guitars but this little gem is easy to travel with and durable with great sound! I purchased a tuner cause the pick up didn't come with one. Absolutely love the colors on the neck! So happy with my purchase!Chelley
I purchased the Little Martin for two reasons. I wanted a small travel size guitar for grab and go playing on the couch. I also wanted a guitar that was not made of all solid woods, because I live in a region that has high humidity as well as significant cold in the winter months. The Little Martin checked both of those boxes. Even though it is small, the Little Martin has a very big voice. When you dig in with a pick, it really projects nicely. Chords sound great, and it has a nice tone. Due to its size, it also makes it easy to play with your fingers. This is a very well made small guitar that is going to last for many years. Bravo Martin!!
I have had my Little Martin for a couple of years at this point and of the four guitars I own, this is the one that gets played the most. This is because due to the small size and very stable construction materials and techniques, it is always near by, ready to pick up and play at a moments notice. While I keep more expensive and delicate guitars in their hard cases with humidifiers to maintain homeostasis as much as possible, the Little Martin is quite at home on a Jamstand next to my desk. I do keep a Planet Waves humidifier between the strings, even when the LM is on the stand because I live in the NE USA where the winter air in my home is very dry due to forced hot air heating. Since the body of the guitar is the High Pressure Laminate (HPL), it appears to me unaffected by changes in temperature and humidity, but I have found that without the humidifier, the bracing seems to dry out more and the sound can become a little 'pingy'. In fact this was my first impression when I picked it up at the local GC after ordering online. If I had not been able to play one in-store previously, I would have been disappointed with the tone and probably returned it. Instead I put on a new set of strings and put the humidifier between the strings and kept it in the quality Martin gig bag that came with it. Within a week it was sounding much better, more like the one that I tried in-store previously. Since the GC stores have good humidity levels in the acoustic rooms, this is a good way to try out a new guitar (after making sure it is in tune). The only reason that I ordered online to pickup in store was that when I was ready to buy, my local GC did not have it in stock at the time.Ron the eternal guitar novice
12. Martin Dx Johnny Cash Acoustic Guitar – Black

Product Details:
This item was returned in great condition. it looks and plays like new, with only minor signs of use (slight scuffs, etc.). in the early 1970s, martin guitar was commissioned to design an all-black lacquered d-35 for country star johnny cash. though martin had never considered such a request before, an all-black d-35 for the “man in black” was custom-made. cash went on to play his custom d-35 on stage for the next 20 years. in 2006, martin released a commemorative d-35 johnny cash edition. the 2019 dx johnny cash is a nod to the history between cash and martin guitar. designed in collaboration with john carter cash and the cash foundation management team, the guitar features a classic dreadnought body shape constructed with jett black high-pressure laminate (hpl) top, back and sides. like the earlier commemorative edition, this instrument includes a custom fingerboard inlaid with stars and the “cash” logo. johnny cash’s signature appears on the rosette and label.
Specifications:
Edition Size | Open |
Construction | Mortise & Tenon Neck Joint |
Body Size | D-14 Fret |
Top Material | HPL |
Top Detail | Jett Black |
Rosette | Custom Ink |
Bracing Pattern | X Brace |
Brace Shape | Scalloped |
Brace Material | Sitka Spruce |
Brace Size | 5/16" |
Back Material | HPL |
Back Detail | Jett Black |
Side Material | HPL |
Side Detail | Jett Black |
Neck Material | Black Birch Laminate |
Neck Shape | Performing Artist |
Neck Taper | High-Performance Taper |
Plek | No |
Nut Material | Black Corian |
Headstock Shape | Solid with Standard Taper |
Headplate Material | HPL |
Headplate Logo Style | Silver Script Ink |
Heelcap | Black |
Fingerboard Material | FSC Certified Richlite |
Scale Length | 25.4" |
Neck Joins Body At | 14th Fret |
Number of Frets Total | 20 |
Fingerboard Width at Nut | 1 3/4'' |
Fingerboard Width at 12th Fret | 2 1/8'' |
Fingerboard Inlay Material | White Plastic and Custom Ink |
Fingerboard Inlay Style | Inlaid Stars and CASH Custom Ink |
Side Dots | White |
Finish Neck | Hand Rubbed |
Bridge Material | FSC Certified Richlite |
Bridge Style | Modern Belly – Drop in Saddle |
Bridge String Spacing | 2 5/32" |
Saddle | Compensated Black Tusq |
Saddle Radius | 16" |
Tuning Machines | Chrome Enclosed Gear |
Knob | Small |
Bridge Pin Material | Black Plastic |
Bridge Pin Dots | White Plastic |
Pickguard | Black |
Electronics | Fishman MX |
Reviews:
got this one as a gift so I can't rate value for money ratio 🙂 it does sound fantastic, very rich in all tone ranges. The preamp is very good too, transfers all the frequencies very well. But, you'd probably expect no less from Martin. What's a little odd, is the material used for construction, to what I reckon its all compressed wood / laminate combination, which appears strange at first, but does the job very, very well. You get a piece of gear you can take outside not taking care this much about dryness, humidity, or weather conditions. The "CASH" theme is allover the instrument and gigbag, which is a very nice feature. All is top quality, and looks solid. Would I buy it with my own money? YES 🙂
This is a great Martin that doesn’t break the bank! The finish and Cash details make this guitar standout anywhere from a living room session to a gig. The Fishman pickup makes this guitar sound great plugged in and it has that Martin warmth that fills a room playing acoustic only. The laminate makeup holds up great in moisture and the added Cash gig bag is a plus for sure. If your like me and are looking for a Martin that stands up to it’s name and keeps you within your budget this is the guitar for you. I’ve gotten nothing but compliments while playing for both the sound and look! Truly is a great guitar for warmth, resonance, and tone and the strings that come standard are pretty great too!Ross B
I wanted one of these since they came out. I finally got one & I am a bit disappointed in it. It plays well & intonates fine, but the description is misleading. The specs say it has a gloss finish & shows a whit trim around the body. It has no trim at all & the finish is a very dull black which makes it look "cheap." There isn't much 'unplugged' volume, but it sounds great plugged. Action is a little higher than I like & there was no truss rod wrench with it. I'll probably keep it because Johnny Cash was my all time favorite entertainer. I'm suprised Martin & Co, didn't take more pride in this particular instrument.picker 49
13. Martin D-15m Acoustic Guitar

Product Details:
The martin d15m acoustic guitar looks like it came right out of the history books, and delivers a sound for the ages. in its 175-year history, martin has set more guitar design trends than can be counted. the company still embraces design techniques intro – model: d-15mconstruction: mortise/tenon neck joint – body size: d-14 fret – top: solid genuine mahogany – rosette: single ring – top bracing pattern: a-frame ''x''top braces: solid sitka spruce 5/16''back and sides: solid genuine mahogany – neck: solid genuine mahogany – neck shape: modified low oval – nut material: bone – headstock: solid/square taper – headplate: solid east indian rosewood – fingerboard material: solid east indian rosewood – scale length: 25.4''number of frets clear: 14number of frets total: 20fingerboard width at nut: 1-11/16''fingerboard width at 12th fret: 2-1/8''fingerboard position inlays: diamonds & squares – short pattern – finish: satin – bridge material: solid east indian rosewood – bridge style: belly – bridge string spacing: 2-1/8''saddle: 16'' radius/compensated/bone – tuning machines: nickel open-geared with butterbean knobs – recommended strings: martin studio performance phosphor bronze medium gauge (msp4200)bridge & end pins: solid black ebony – pickguard: delmar tortoise color – case: 345 hardshell
Specifications:
Construction | Simple Dovetail Neck Joint |
Body Size | D-14 Fret |
Rosette | Single Ring |
Top Bracing Pattern | A-Frame X |
Top Braces | Solid Sitka Spruce 5/16 inches |
Back Material | Solid Genuine Mahogany |
Side Material | Solid Genuine Mahogany |
Neck Material | Solid Genuine Mahogany |
Neck Shape | Modified Low Oval |
Nut Material | Bone |
Headstock | Solid/Square Taper |
Headplate | Solid East Indian Rosewood |
Fingerboard Material | Solid East Indian Rosewood |
Scale Length | 25.4 inches |
Number of Frets Clear | 14 |
Number of Frets Total | 20 |
Fingerboard Width at Nut | 1 11/16 inches |
Fingerboard Width at 12th Fret | 2 1/8 inches |
Fingerboard Position Inlays | Diamonds & Squares – Short Pattern |
Finish Back and Sides | Satin |
Finish Top | Satin |
Finish Neck | Satin |
Bridge Material | Solid East Indian Rosewood |
Bridge Style | Belly |
Bridge String Spacing | 2 1/8 inches |
Saddle | 16 inch Radius/Compensated/Bone |
Tuning Machines | Nickel Open-Geared with Butterbean Knobs |
Recommended Strings | Martin MSP 4200 Light Phosphor Bronze |
Bridge and End Pins | Solid Black Ebony |
Pickguard | Delmar Tortoise Color |
Manufacturer Part Number (MPN) | 10D15M |
Reviews:
Overall: My first thoughts when I took that first strum, was “Guy Clark.,” except I think that man made his own guitars. But if I can describe the first sound I heard or who, that’s what it was, Guy Clark designed this one. It is beautiful and played in tune out of the box. Now I’m just more of a collector than a player, but I some ESP’s, a Yamaha, Taylor 710e, Ovation, an Ibanez, and now this magical Martin D-15M StreetMaster Acoustic. Good luck putting it down before your fingers bleed. At this price point and much above this is a splendid guitar. I can’t wait to hear what it sounds like after it has hours and hours of use on it. Buy one they’ll take it back if you don’t like it, but somehow I don’t see you making that choice. If all the other Martins haven’t convinced you, this one will. If your budget isn’t as high, do yourself a favor and keep saving or pay as you go option.Richard
I literally walked around Sam Ash plucking low E strings listening for a deep rich sound. Martin seemed to have more than anyone else. I liked the look of the Mahogany top/back/sides/neck. The ripples of the grain add a beautiful touch to the color of the wood. The tone has totally warmed up more and grown deeper over the 10 or 11 months she's been home with me. I have the MFX740 Bronze Acoustic Guitar Strings (Martin strings, they call them Tommy's Choice) on there and it just gives this rich low rumble on the low E and the D strings that if I have my feet up on my desk I can feel on my desk. The ring out is intense and long on this baby. I have not had anyone pick up my Martin and NOT say how much they love the tone of her. I do love the look of no binding… but, I'm going to have to say I do have some dents on the sides where the bindings would be protecting. That said… I'm not sure I care at the same time I think I care. I think that means I want it to be perfect but I also am okay with her getting age marks just as long as it doesn't do some serious damage. I would buy another. I'd buy it for my Dad. I'd buy it for one of my kids if they'd play. If you pick this guitar up you'll probably end up taking it home. Comes with a beautiful martin case with green insides. Acoustic only, don't forget.BasPilot
I have somewhat passively searched for the holy grail of the acoustic/electric bass guitar for years. Most acoustic bass guitars available are less than $500 and sound horrible. I started researching again and found numerous reviews stating that the Martin is heads and shoulders above the rest. I was still hesitant since I didn't know where I could check one out first. I found one in McKinney, TX. I played it unplugged and plugged. I had found it. Since my local music store had recently become a Martin dealer, I was planning to have them order me one. I knew that Martin had recently discontinued production, but they offered to build one and would take about 3 months. I visited a Sam Ash store in Birmingham and another in the Dallas area. I purchased an $8 item and was mildly annoyed as the guy checking me out was asking for everything with the exception of my passport and birth certificate. Now, I'm glad I cooperated. I receive regular emails from Sam Ash. Late one night, I see that they were offering 48 months with no interest. I thought to myself, I wonder if they have a Martin bass. Low and behold, hallelujah, they had a limited stock and was on sale. Well, I applied for the credit and was approved, however, when I tried to check out, I didn't have my new account number. The next morning, I had an email from them announcing a Paul Ash sale. I called Sam Ash and explained my issue during checkout. I asked if there was an additional discount due the sale. He put me on hold for a while and came back and knocked another $70. Two days later, on a Saturday, Fedex delivered the latest addition to my bass family. Of course I would prefer it to be louder unplugged, but it's fine for sitting around playing. Plugged in, it sounds amazing. Too bad Martin discontinued it. I purchased a Thumby and mounted it on the edge of the sound hole. I love this bass and a big fan of Sam Ash.Jeff
14. Martin Lxk2 Koa Little Martin Acoustic Guitar – Natural

Product Details:
The martin lxk2 little martin koa acoustic guitar with gig bag is perfect for beginners, students or the player who desires a pick-up-and-play travel-size guitar. the lxk2 features solid martin craftsmanship and doesn’t compromise quality sound or tone despite its smaller size. the lxk2 little martin is durable and easy to play, designed with koa top, back and sides and headstock. the martin lxk2 fingerboard and bridge are crafted from rosewood, and the neck is carved from natural colored stratabond.
Specifications:
Construction | Mortise/Tenon Neck Joint |
Body Size | Modified 0-14 Fret |
Rosette | Herringbone Style, Gold and Black |
Top Bracing Pattern | Modified X Series X |
Top Braces | Crowned Cross Brace |
Back Material | Koa Wood Pattern HPL Textured Finish |
Side Material | Koa Wood Pattern HPL Textured Finish |
Neck Material | Natural Stratabond |
Neck Shape | Modified Low Oval |
Nut Material | White Corian |
Headstock | Solid/LX Taper |
Headplate | Koa Wood Pattern HPL |
Fingerboard Material | Solid Morado or Solid East Indian Rosewood |
Scale Length | 23 inch |
Frets Clear | 14 |
Frets Total | 20 |
Fingerboard Width at Nut | 1-11/16 inch |
Fingerboard Width at 12th Fret | 2-1/16 inch |
Bridge Material | Solid Morado or Solid East Indian Rosewood |
Bridge Style | Belly |
Bridge String Spacing | 2-1/8 inch |
Saddle | 16 inch Radius/Compensated/White Tusq |
Tuning Machines | Chrome with Small Buttons |
Bridge and End Pins | White with Black Dots |
Interior Label | Gold Foil |
Reviews:
I am a petite female and love the size of this Martin Little! I had considered purchasing a baritone ukulele with 6 strings because I wanted a very small body. The Little is larger than a baritone uke but is still within the range of PERFECT and came with an acoustic/electric option so I can jam! I have larger guitars but this little gem is easy to travel with and durable with great sound! I purchased a tuner cause the pick up didn't come with one. Absolutely love the colors on the neck! So happy with my purchase!Chelley
I purchased the Little Martin for two reasons. I wanted a small travel size guitar for grab and go playing on the couch. I also wanted a guitar that was not made of all solid woods, because I live in a region that has high humidity as well as significant cold in the winter months. The Little Martin checked both of those boxes. Even though it is small, the Little Martin has a very big voice. When you dig in with a pick, it really projects nicely. Chords sound great, and it has a nice tone. Due to its size, it also makes it easy to play with your fingers. This is a very well made small guitar that is going to last for many years. Bravo Martin!!
I have had my Little Martin for a couple of years at this point and of the four guitars I own, this is the one that gets played the most. This is because due to the small size and very stable construction materials and techniques, it is always near by, ready to pick up and play at a moments notice. While I keep more expensive and delicate guitars in their hard cases with humidifiers to maintain homeostasis as much as possible, the Little Martin is quite at home on a Jamstand next to my desk. I do keep a Planet Waves humidifier between the strings, even when the LM is on the stand because I live in the NE USA where the winter air in my home is very dry due to forced hot air heating. Since the body of the guitar is the High Pressure Laminate (HPL), it appears to me unaffected by changes in temperature and humidity, but I have found that without the humidifier, the bracing seems to dry out more and the sound can become a little 'pingy'. In fact this was my first impression when I picked it up at the local GC after ordering online. If I had not been able to play one in-store previously, I would have been disappointed with the tone and probably returned it. Instead I put on a new set of strings and put the humidifier between the strings and kept it in the quality Martin gig bag that came with it. Within a week it was sounding much better, more like the one that I tried in-store previously. Since the GC stores have good humidity levels in the acoustic rooms, this is a good way to try out a new guitar (after making sure it is in tune). The only reason that I ordered online to pickup in store was that when I was ready to buy, my local GC did not have it in stock at the time.Ron the eternal guitar novice
15. Martin D-10e Road Series Sapele Acoustic-Electric Guitar

Product Details:
Martin's road series presents this great entry for players ready for travel and performance. between the sitka spruce top and sapele back and sides, this instrument produces instantly captivating tones to catch anyone's attention. the d-10e is also equally exceptional in its playability with a fsc certified richlite fingerboard and select hardwood neck. once plugged in, the d-10e comes with fishman mx-t electronics with a built-in soundhole tuner, ready to play at a moment's notice. visually, the d-10e is a knockout with its satin finish and rosette border. this road series entry has all the looks and sounds to take any stage.
Specifications:
Construction | Mortise & Tenon Neck Joint |
Body Size | D-14 Fret |
Top Material | Sitka Spruce or Sapele |
Rosette | MOP Pattern with Multi-Stripe |
Bracing Pattern | X Brace |
Brace Shape | Non-Scalloped |
Brace Material | Sitka Spruce |
Brace Size | 5/16" with 1/4" Tone Bars |
Back Material | Sapele |
Side Material | Sapele |
Binding | Black |
Top Inlay Material | Multi-Stripe |
Neck Material | Select Hardwood |
Neck Shape | Performing Artist |
Neck Taper | High Performance Taper |
Plek | Yes |
Nut Material | White Corian |
Headstock Shape | Solid with Standard Taper |
Headplate Material | HPL |
Headplate Logo Style | Script Ink |
Heelcap | Black |
Fingerboard Material | FSCA Certified Richlite |
Scale Length | 25.4" |
Neck Joins Body At | 14th Fret |
Number of Frets Total | 20 |
Fingerboard Width at Nut | 1 3/4" |
Fingerboard Width at 12th Fret | 2 1/8" |
Fingerboard Inlay Material | MOP Pattern |
Fingerboard Inlay Style | MOP Pattern Dots- 28 Style Pattern |
Side Dots | White |
Back and Side Finish | Satin |
Back and Sides Color | Cherry |
Finish Top | Satin |
Top Color | Clear |
Finish Neck | Hand Rubbed |
Bridge Material | FSCA Certified Richlite |
Bridge Style | Modern Belly – Drop in Saddle |
Bridge String Spacing | 2 5/32" |
Saddle | Compensated White Tusq |
Saddle Radius | 16" |
Tuning Machines | Chrome Enclosed Gear |
Recommended Strings | Lifespan 2.0 Auth Acoustic MA550 Phosphor Medium |
Knob | Small |
Bridge Pin Material | White Plastic |
Bridge Pin Dots | Black Plastic |
Pickguard | Faux Tortoise |
Electronics | Fishman MX-T |
Reviews:
I bought my fiancé and I a new Martin. I got her a Martin Dx2e and I got this one. I received mine first since I ordered from here which was wonderful. I got hers off of reverb because ams didn’t have sunburst which she wanted. I was not picky about color but I went with this one. I was super excited to say the least because this was my first Martin Guitar. I also purchased another guitar last year from Ams and I loved it. I digress and move forward to getting it. So I opened it up and I was super pleased with how perfect it looked. Then I started playing it. It was great until I went to play a D chord or anything that involved the high E string. It is cut way too low on the nut and the slightest pressure makes the string fall off the fret board. I thought maybe it was just me, however my father in law to be, which is a professional had the same issue. Also my fiancé had the same issue. Needless to say, I tried to make it work. I sent Ams an email. No response. I guess I’m stuck with this 1k dollars in a guitar that is going to need to be repaired at a shop when it’s brand new. So overall, if you want to take the risk, go for it. My fiancé got the Dx2e and it’s stellar. I would rather have one like hers than this one tuner or not. Hers sounds much better too. The looks and everything else is fine. Just the bottom string is way way too low.Brittany
Sound: Unplayable, neck is crap Features: Doesn’t matter what you do to adjust the neck , it is crap Ease of Use: I wouldn’t know , this guitar should never have been allowed to be released . The neck is unacceptable Quality: It looks pretty. If I wanted a pretty guitar to never be played then it would be ok . But you can not even play this $900 piece of crap. Extremely frustrating Value: Absolutely no. Buy another brand. Breedlove would be my best choice as I bought one and absolutely loved it out of the box . Best acoustic guitar I ever played Manufacturer Support: I have contacted Martin. No authorized repair shop within 100 miles of me in my state . Martin should be ashamed of this garbage The Wow Factor: Martin name sucked me in . Never ever again if they don’t want to fix this piece of junk Overall: I have been playing and working on my own guitars since 1975 . This is absolutely the worst guitar I’ve ever owned. The neck has an S shape to it . The relief is acceptable up to the 7th fret , after that it rapidly accelerates to an unusable 1/4 inch at the 12th fret . No matter how much you attempt to adjust it, it simply is unplayable. I am ashamed to even take it out of the bag . Martin quality control seriously blew it big time on this guitar. I own dozens of guitars and waited until my retirement to buy that Martin guitar of my dreams. This is a nightmare, not a dream. Stay away from this piece of crap . No matter what adjustment you do to the truss rod , it won’t help. Bass to treble side is extremely different. 1/4 inch on the bass side at the 12th but the treble side is marginally better. However, the S shape of the fretboard makes the guitar unplayable unless you like staying in the cowboy chord area . My Ovation, Breedlove,Fender , and Gibson acoustic guitars are brilliant examples of guitar playability. This Martin was to be my final guitar since I have only played them and never owned one . I can’t even play this piece of garbage. Martin has no dealer or authorized repair shop within 100 miles of me so I am stuck with a $900 piece of firewood. Never ever will I buy anything with that name again. That’s all they are, a name. How this got by quality control blows my mind. I have $200 acoustic guitars that are much better than this. Totally disgusted by my experience with this guitar.Gregory
Overall: So after playing guitar for more than 30yrs, this is my first Martin. Very weird considering my father sang and played with a Martin F-65 (rare semi-hollow body, only about 600 made) most of his life. I've lived all my life usually not more than 2 hours from the factory, and for most of that time less than an hour. I've taken the factory tour which was awesome. I've met many musicians that play Martins, endorse them, etc. I've been playing the last year or so on a Fender acoustic(not including my electrics that I own or play), which is a decent enough instrument, albeit a cheap sub 300$ guitar, when I purchased it over a year ago. I have owned a few other acoustics, a couple Takamines, Fenders, Ibanez, Ovations etc over the years. I won't say I have any considerable experience with 1k and up acoustic guitars, but I like to believe I have at least a decent ear. The sound is really the thing here, as this is not an ornate guitar with fancy inlays and stuff like that. Still, one of the main reasons I chose this model is because it's solid wood. I have no experience with Martins HPLs, but I also know Martin wouldn't put their name on anything if it isn't well made. I prefer solid wood, so that's a great reason to chose this model for this price point, and the reason I did. That being said, this is what a great guitar should sound like. I can easily hear the way every string sounds as clear and loud as the others. I'm pretty sure this has to do with bracing and the way they build their tops. it just projects the way a guitar should, not muddy on low strings and too bright on the highs. It sounds superb, plain and simple. Clear, bright, articulate. Martin has been perfecting guitar building for almost 2 centuries now, and while this is not their top of the line guitar, it gets all the benefit of their experience in the way they're designed and built. One thing I didn't realize about Martins until after getting this, and looking at their specs on most of their guitars is they have a wider neck (1.75" width) than I'm used to. My Fender neck was more like an electric neck, both width and thickness wise. I will easily get used to this though, and may enjoy it even more in time, as I have big hands. I also love the hidden controls for the volume and tone and tuner. I love that they didn't cut a huge hole in the body of the guitar for them, very cool. I haven't plugged it in yet, but I have no doubt it'll sound good. Fit and finish are fantastic, as is the soft case they include. I would rather it have had a gloss finish, except the neck, but that's just a personal thing. It's a beautiful, well made instrument, that you should definitely put on your short list of under 1k guitars.I would definitely recommend this guitar.
16. Martin M-36 Acoustic Guitar

Product Details:
The m-36 features a "0000" body size giving it a huge sound, while being a bit more comfortable to play than the dreadnaught with a tighter, more focused low end. this guitar is in excellent condition and plays beautifully with a comfortable modified low oval neck profile. a warm sounding instrument producing a punchy, balanced tone great for both fingerpicking and strumming! includes original hardshell case.
Specifications:
Body Size | M-14 Fret (0000-14 Fret) |
Finish Top | Gloss |
Construction | Dovetail Neck Joint |
Top Material | Spruce |
Back and Side Finish | Gloss |
Bracing Pattern | Forward-Shifted X-Brace |
Brace Shape | Scalloped |
Scale Length | 25.4" |
Fingerboard Width at Nut | 1 3/4'' |
Neck Shape | Modified Low Oval |
Neck Taper | High-Performance Taper |
Top Color | Aging Toner |
Bridge Style | Modern Belly – Drop in Saddle |
Binding | Antique White |
Bridge String Spacing | 2 5/32" |
Top Inlay Material | Multi-Stripe |
Bridge Material | East Indian Rosewood |
Bridge Pin Material | White Plastic |
Pickguard | Tortoise Pattern |
Bridge Pin Dots | Faux Tortoise |
Saddle | Compensated Bone |
Rosette | Multi-Stripe |
Saddle Radius | 16" |
Brace Material | Spruce |
Brace Size | 5/16" |
Back Purfling/Strip | Style 35 |
Back Inlay Material | Multi-Stripe |
Heelcap | Antique White with Multi-Stripe |
Endpiece | Antique White |
Side Inlay Material | Multi-Stripe |
Endpiece Inlay | Multi-Stripe |
Neck Material | Select Hardwood |
Fingerboard Material | Ebony |
Finish Neck | Satin |
Fingerboard Width at 12th Fret | 2 1/8'' |
Neck Color | Dark Mahogany |
Fingerboard Inlay Style | Style 38 |
Number of Frets Total | 20 |
Fingerboard Inlay Material | Mother-of-Pearl |
Neck Joins Body At | 14th Fret |
Fingerboard Binding Material | Antique White |
Side Dots | Black |
Headstock Shape | Solid with Square Taper |
Tuning Machines | Chrome Enclosed Gear |
Headplate Material | East Indian Rosewood |
Knob | Large |
Headplate Logo Style | Script Old Style Overlay |
Nut Material | Bone |
Finish | Natural |
Year | 2018 – 2022 |
Made In | United States |
Back Material | Rosewood |
Body Shape | Auditorium |
Finish Style | Gloss |
Fretboard Material | Ebony |
Number of Strings | 6-String |
Right / Left Handed | Right Handed |
Sides Material | Rosewood |
Wood Top Style | Plain |
Reviews:
I really love this guitar! I purchased in a sunburst finish. There's nothing to dislike. Martin's come with the action a little high, this is to be expected. I took it to a tech to have the action lowered to my taste. Because it's plek'd from the factory, you can really get the action quite low. It's is now the best of my guitars. The sound is so balanced, it's beautiful to behold and to play. I never want to put it down. I've waited a bunch of years to commit…it is everything I wanted and imagined it could be. Martin standard series are all amazing. They Are the Martin sound defined, the reference point. They are not a cheap investment, but they are worth it. Whether you like a short scale hog (000-18), or a long scale Rosewood dread (D-28), you will not be disappointed. I love the long scale OM with rosewood. I wanted a sunburst with understated dark bindings to blend with the sunburst. This is my guitar…it is stellar in every respect. If you can acquire any model of the standard series of martins, you will be blessed with tone and beauty. It will be a lifetime guitar.GGC
I don’t like buying mid to high end guitars in the blind. Even if it’s a Martin, Collings, Taylor etc… but I was able to play 3 M36’s at a store in Nashville and they all sounded the same. I had to think about it because I have a Martin HD28 and it was very close. The thing about the M36 is that it having a OOOO (Jumbo) size body, I got bolder low ends. Finger style was easy and picking was bright and articulate. Problem solved not needing to bring more then one guitar to the recording studio and didn’t have to worry about gigging with it because of the affordability. American Musical Supply always makes it easy with the nice selection and 12 months interest free to get one. I installed (myself) a K&K pure mini pickup and this guitar sings. Thank AMS!T Galloway
17. Martin X Series Lx1 Little Left-Handed Acoustic Guitar Natural

Product Details:
The martin lx1l little martin left-handed guitar displays martin's exquisite quality whilst embracing the benefits of a smaller size. with its compact body and 23'' scale length, it is wonderfully comfortable to play and is perfect for packing up and throwing in the car as you hit the road. making your life as a travelling musician easier, the lx1l little martin promises to offer a sublime playing experience. whether you're on stage or jamming with friends round the campfire, you'll want exceptional, reliable sound. the sitka spruce top provides just that and more. explore wondrous clarity and brilliant volume that belies the body's travel size whilst you fret seamlessly across the richlite fretboard. the mahogany high pressure laminate body will then ensure you're granted waves of endless resonance, warmth, and rich dynamics.
Specifications:
Construction | Mortise/Tenon Neck Joint |
Body Size | Modified 0-14 Fret |
Rosette | Multiple Black/White Boltaron with Red Fiber |
Top Bracing Pattern | Modified X Series ''X'' |
Top Braces | Crowned Cross Brace |
Side Material | Mahogany Pattern HPL Textured Finish |
Neck Shape | Modified Low Oval |
Nut Material | White Corian |
Headstock | Solid/LX Taper |
Headplate | Mahogany Pattern HPL |
Fingerboard Material | Richlite |
Scale Length | 23'' |
Number Of Frets Clear | 14 |
Number Of Frets Total | 20 |
Fingerboard Width At Nut | 1-11/16'' |
Fingerboard Width At 12Th Fret | 2-1/16'' |
Finish Top | Hand Rubbed Finish |
Bridge Material | Richlite |
Bridge Style | Belly |
Bridge String Spacing | 2-1/8'' |
Saddle | 16'' Radius/Compensated/White Tusq |
Tuning Machines | Chrome w/ Small Buttons |
Interior Label | Black Foil Label |
Finish | Mahogany |
Sides Material | High Pressure Laminate |
Number of Strings | 6-String |
Fretboard Material | Composite |
Top Material | Spruce |
Right / Left Handed | Left Handed |
Body Shape | Travel |
Reviews:
I haven't played in a few years but the pandemic had me searching for something to get my mind off working crazy hours. There would be few guitars I'd buy sight unseen but I rolled the dice because I'd played Martin's first backpacking incarnation and was familiar with their quality. This little guitar wouldn't disappoint! It is a smaller scale but my fingers fit on the fret board and it's easy to just leave out and pick up when you need it. The sound is really good for the size and it's easy to strum or pick. It was exactly what I was looking for but a little more. I honestly didn't expect to be this happy with how much guitar I got for the price. If you need something to stick by the desk or play by the fire, this is a good optionBob
it arrived yesterday to romania, from music store germany (thanks for handling it with so much care!) and i laid my hands for the first time on this loveable tiny beauty. it looks amazing and feels amazing, in every aspect. excellent playability all thourghout the neck, right out of the box… i wanted a travel buddy — small, sturdy, light and playable… and here she is. there are a lot reviews on the net, i will let here my own subjective opinion, after one day of having it (shipped from music store, germany). – i'm a tall guy (6 feet 3 / 190 cm), but the smallness of martin lx1 is not a hindrance in playing. my wife is a mongolian petite, so perhaps I'm used with handling small beauties 🙂 – i have big hands, but not thick fingers. if i stretch my fingers i can cover this guitar's neck from the net to the 10th fret (from pinky to thumb stretched out) — so you can have a clue; however, i feel comfortable playing all over the neck, even past the 14th fret. so no problem with that… and the transition back and forth to my normal-sized acoustic fender pm1 or to my electric squier affinity tele feels smooth, adjusting in no time. – the guitar is neck heavy, but it doesn't bother me at all; you see, it sits comfortably in my lap. – well, of course, the sound is not of a normal-sized guitar — one has to live with that. it is somehow a boxy sound, but martin has a lot of character, so i'm quite pleased with the sound. the guitar seems to suit better for fingerpicking or strumming with bare fingers; when i use my pick it's too noisy, especially the d string is sooo loud, taking over the other strings. in know, it's a new guitar, freshly out of its box, so perhaps it needs time to shape its sound. if this will not happen (due to hpl back and sides) i will still be pleased, the sound is good enough and i can work my way around. – the machine heads are of excellent quality (like every aspect of this guitar, actually): i tuned the guitar yesterday, after taking it out of the box, then forgot about it… summing up: craftmanship — state of the art sound — boxy, you may like it or not (martin has character, a distinct voice, above all) optic — beautiful as it gets, simply perfect price/performance — well, i would have loved to pay less… in the states, it was 399 USD until recently, now it's more expensive and perhaps the price will rise as well in the current covid situation; so buy know, don't postpone if you consider having one.
I played a friend's dreadnaught sized Martin and fell in love. I already owned two other guitars at the time (Samick and a Fender Redondo Player acoustic) and I didn't want to spend the money in a Martin at this time. This happened to pop up as a stupid deal of the day and so I bought. I wasn't sure about the laminate at first, but it feels and plays like a well made guitar. It sounds bright and it is a tone I enjoy hearing. If someone had given me advice as a new player I would have wished they told me about this guitar. It is concert size so it is a little smaller than a dreadnaught. It is easier for me to practice barring chords and doesn't feel as awkward on my body as my dreadnaught. I love both guitars, but I definitely still use this one as I advance as a player. I noodle on it when I am watching tv, take it when I go way for the weekend, and bring it to play for my friends. This is a fantastic guitar and I can proudly say I own a Martin :).RockstarAsh
18. Martin Sc-13e Special Acoustic-Electric Guitar

Product Details:
The martin sc-13e special electro-acoustic is dreamy in playability and heavenly in sound. afterall, it is a martin, so you can count on premium quality. crafted from ziricote and adorned with a sitka spruce top, the body resonates with richness, dynamics, and clarity. every chord you play will be magnificent. plus, thanks to an exquisite ebony fretboard, you'll have a silky-smooth surface to fret upon, as well as luscious sustain carrying each note. whether you're practising at home or captivating your awestruck audience, pristine playability is a must. the sleek sure align neck system and handy cutaway allow you to waltz effortless across the frets, sliding right to the top of the scale with ease. it's a seamless playing experience you won't be able to get enough of. and when you're ready to plug in and amp up, utilise the lr baggs element electronic system – it is expertly designed to enhance your dazzling acoustic sound.
Specifications:
Edition Size | Open |
Construction | Sure Align Linear Dovetail Neck Joint |
Body Size | S-13 Fret Cutaway |
Top Material | Sitka Spruce |
Rosette | Aperture Design with Multi-Stripe |
Bracing Pattern | Tone Tension X Brace |
Brace Material | Sitka Spruce |
Brace Size | 5/16" with 1/4" Tone Bars |
Back Material | Ziricote Fine Veneer |
Side Material | Ziricote Fine Veneer |
Binding | White |
Top Inlay Material | Black with Multi-Stripe |
Neck Material | Select Hardwood |
Neck Shape | Low Profile Velocity |
Neck Taper | High-Performance Taper |
Plek | Yes |
Nut Material | White Corian |
Headstock Shape | Solid with Square Taper |
Headplate Material | Ebony |
Headplate Detail | Do Not Use |
Headplate Logo Style | Silver Script Overlay |
Fingerboard Material | Ebony |
Scale Length | 25.4" |
Neck Joins Body At | 13th Fret |
Number of Frets Total | 20 |
Fingerboard Width at Nut | 1 3/4'' |
Fingerboard Width at 12th Fret | 2 1/8'' |
Fingerboard Inlay Material | Ziricote Dot with Plastic Ivory Pattern Border |
Fingerboard Inlay Style | SC-13 Special Style |
Side Dots | White |
Back and Side Finish | Gloss |
Finish Top | Gloss |
Top Color | Clear |
Finish Neck | Satin |
Bridge Material | Ebony |
Bridge Style | Sloped Modern Belly – Drop in Saddle |
Bridge String Spacing | 2 5/32" |
Saddle | Compensated White Tusq |
Saddle Radius | 16" |
Tuning Machines | Ratio Nickel Open Gear |
Recommended Strings | Acoustic Custom Light S535T |
Knob | Butterbean |
Bridge Pin Material | White Plastic |
Bridge Pin Dots | Black Plastic |
Pickguard | Tortoise Pattern |
Electronics | LR Baggs Element |
Reviews:
I play locally for hire as a solo acoustic guitar / vocalist. My primary guitar is a Martin GPCP Aura. I purchased the Martin SC 13E in hopes of finding a guitar with better action and playability. My first reaction to the 13E was really nice and it did play with less effort / strength than my GPCP. The first issue I noticed was string buzz on the 1st and 2nd strings. It wasn't awful but noticeable. I played the guitar that weekend at two shows. I was still noticing the buzz. So, I started the set-up investigation. The neck relief, the slight bow forward that a guitar neck needs, looked really good, maybe could use a bit more to help with the string buzz. This is an easy truss rod adjustment; however, I didn't change the truss rod setting. The next thing I looked at was the distance of the string height, above the 12th fret. My thought was I would try to lower this slightly if I decided to keep the guitar. The next weekend I got the guitar out at home before getting ready for my show that evening, to run through a new song I was planning to do at hat nights show. I took the SC13E out of the bag and the 1st and 2nd strings were touching the guitar at the 20th fret. I thought the saddle had somehow pushed down lower into the bridge…. I exchanged that guitar for another SC1E. GC person was easy to work with and got the exchange handled quickly. About 3-4 days I had my second SC13E in my hands. It also had the same string buzz, even though the neck relief and action looked good. I played a couple of shows with this guitar and then I started noticing the buzz getting worse. If you are still reading, the reward is at hand. lol I have decided that the problem with this guitar, and probably the other guitar, is the neck angle is off. I will explain why I think it is off and explain how you can check your guitar. I have watched hundreds of youtube videos trying to learn how to set-up and care for my instruments. I have watched neck adjustment videos put out by fender, for their strat guitars, because I wanted to know how to adjust my Acoustasonic Strat. But what I am getting ready to sell you, I have discovered on my own and may not be accurate, but here it goes. If I put a capo, or hold the strings down with my hand. on the 12th fret, there is a space between the strings and the frets above the 12th fret. A pretty wide gap at the 20th fret. On the SC13E the strings are almost touching and the 1st string is touching. Wa La I believe that neck angle is off. I think it was off on both guitars. So check yours before missing your return date. If you check your guitar and it has this problem, don't totally freak out. The SC13E has an adjustable neck angle, so it can be made perfect. If you find what I described above, I suggest contacting Martin Guitar and GC. Another thing to be aware of, the three Martin guitars I have owned had the nut groves cut too narrow. I took my GPCP to an excellent luthier. He filed the width and depth to correct specifications and filed down my frets (I had two that where high) Both of the SC13E guitars needed to have the nuts filed. If you are trying to tune your guitar by making a very slight turn to get it just right and the string doesn't increase pitch and then jumps to a sharp pitch, the string is probably pinching in the nut grove. Both SC13E's were boogers to tune for that reason. One of them broke the B string while tuning up from dropping the pitch. I am returning my second SC13E tomorrow and I think I am going to give it a rest for awhile. Maybe look for something different. FYI: I love my Martin GPCP Aura, unfortunately they discontinued that model. The sound I get from the Fishman Aura electronics is the best I have heard. PS: part of the reason the SC13E plays easier is they use a lighter gauge string. I put a set of the MA535T Martin Lifespan strings on mt GPCP and even with the truss rod loose, the strings don't pull on the neck hard enough to give me the neck relief that is needed. The SC13E is a beautiful guitar to look at and the electronics onboard sound very nice. I learned, I'm not a big fan of having the controls inside the sound hole. A little awkward to get to while strumming and the phase reverse switch is way back from the opening. If you like using the hole covers to fight feedback, I'm pretty sure you would be out of luck. I think this price range of acoustic guitar should come with a hard case. I gave this guitar a 2 rating because it has potential BUT i do think both of these guitars suffered from poor quality control. My luthier could have made both of these guitars sing beautifully but I refuse to buy a new guitar and send it for repairs, even if the repairs are set-up issues. A new guitar on the north side of a thousand dollars should show up playing without string buzzing and the strings close enough to the neck that you hand doesn't feel like you just hung from the monkey bars during an entire recess.Dale
I ordered this guitar from AMS on a Friday evening and it was delivered the following Wednesday, so kudos to AMS for prompt service. Trust me when I tell you that the guitar looks even more stunning in person than it does in the website images. The grain on the koa back and side veneers is distinctive and eye-catching. The pearloid rosette and fingerboard inlays are also well done. I purchased a set of bridge pins from Martin's website that uses the same pearloid, and they look nice. The neck profile is quite comfortable, and of course the unique heel-less design of the cutaway gives you easy access to the entire fingerboard. I expect to see this feature turning up on other Martin models down the road. The asymmetrical body shape is visually unique and phenomenally comfortable to play sitting down, which is mostly how I play. The sound hole tuner is a nice touch, and the Fishman MX-T electronics sound fine to me, although I mostly don't play plugged in. This is my first Martin guitar, and it is true what they say: Nothing else sounds like a Martin! Martin has really done themselves proud with the SC-13E. Highly recommended!
This is a beautiful instrument with a stunning full acoustic sound despite the deep cut away and relatively small body size. The amazing design allows for unlimited access to the upper frets and the whole instrument feels very comfortable to play. I wanted an acoustic guitar with the accessibility of an electric and this new design from C.F.Martin delivers that in droves without ever loosing it's acoustic personality and sound. I own a super jumbo acoustic made by another company but the SC13e makes it sound dull and lifeless even before it is plugged in. The SC13e has that familiar Martin sound which is full and beautiful. The fishman pickup will then allow that sound to be delivered to anywhere from a gig in a noisy pub to full stadium if required. What a stunning instrument!Reviewed by Kenny's Music custom
19. Martin Djr-10e Streetmaster Acoustic Guitar

Product Details:
The martin drje ¾ dreadnought was made in mexico. the body was made of solid tonewoods. the top, back and sides were made of solid sapele. x bracing was used as the top construction. the martin djre was finished with a beautiful streetmaster finish. for electronic pickup, the beautiful acoustic guitar was equipped with a fishman sonitone pickup system.the martin dreadnought junior comes with a martin case.each acoustic guitar is tested and set in our workshop for acoustic guitars.
Specifications:
Edition Size | Open |
Construction | Mortise & Tenon Neck Joint |
Body Size | D Junior-14 Fret (000 Depth) |
Top Material | Sapele |
Rosette | MOP Pattern with Multi-Stripe |
Bracing Pattern | X Brace |
Brace Shape | Scalloped |
Brace Material | Sitka Spruce |
Brace Size | 1/4" |
Back Material | Sapele |
Side Material | Sapele |
Neck Material | Select Hardwood |
Neck Shape | Dreadnought Junior |
Neck Taper | High Performance Taper |
Plek | Yes |
Nut Material | White Corian |
Headstock Shape | Solid with Dreadnought Junior Taper |
Headplate Material | Sapele (New Option) |
Headplate Detail | Do Not Use |
Headplate Logo Style | Script Overlay |
Fingerboard Material | FSC Certified Richlite |
Scale Length | 24'' |
Neck Joins Body At | 14th Fret |
Number of Frets Total | 20 |
Fingerboard Width at Nut | 1 3/4'' |
Fingerboard Width at 12th Fret | 2 1/8'' |
Fingerboard Inlay Material | Mother of Pearl Pattern |
Fingerboard Inlay Style | Style 28 |
Side Dots | White |
Back and Side Finish | Satin |
Back and Sides Color | Dark Mahogany |
Finish Top | Satin |
Top Color | Mahogany Burst |
Finish Neck | Hand Rubbed |
Neck Color | Dark Mahogany |
Bridge Material | FSC Certified Richlite |
Bridge Style | Junior Style Belly |
Bridge String Spacing | 2 5/32" |
Saddle | Compensated White Tusq |
Saddle Radius | 16" |
Tuning Machines | Chrome Enclosed Gear |
Recommended Strings | Retro Light MM12 |
Knob | Small |
Bridge Pin Material | White Plastic |
Bridge Pin Dots | Black Plastic |
Pickguard | Tortoise Pattern |
Electronics | Fishman Sonitone |
Reviews:
I am a singer, songwriter, church musician, and quartet member. I have been playing and singing for over 60 years. own more than a few guitars. Most are Martins. I was looking for a smaller, lighter, easy to transport acoustic to use in my street ministry. This one caught my attention and since it was a Martin, I expected it to be a quality instrument. I am not disappointed. I've owned several Mexican made Martins over the last few years finding most to be well made, quality instruments. I have to say that this is probably the best one so far. Fit and finish is comparable to the lower priced US made models. That is to say, very good. Sound and playability is very good. The strings on this instrument are well matched for a balanced sound from bass to treble. The bass is not quite as deep and booming as a full sized dreadnought but still strong. Highs are crisp and clear. Scale is a little shorter than a full sized guitar but due to the 1.75" nut width, it doesn't feel cramped. It chords well up and down the neck and intonation is near perfect. Great for finger picking, too. The action could be a little bit lower for me but plays great right out of the box. I am very happy with this instrument and would definitely recommend it to anyone looking for a slightly smaller body size in an affordable Quality guitar. And it is a Martin 😊Thomas
I was looking for a beginner guitar for my grown but petite daughter that would fit her as well as give her a great start. I let her try several and she liked the feel and the looks of the Martin DJR-10E in Sapele the best. I liked the sound and the fact that I could depend on Martin Quality. It's been about a month now and neither of us has been disappointed. It's an easy to play and great sounding guitar, which makes her want to pick it up and play. We're both very well pleased with it.JIM
Took a GS Mini back and traded it for this. Much prefer this in almost every way (except for the gig bag… Taylor does a better job there). The reviewer who said this guitar doesn't have a truss rod is misinformed. This guitar has a biflex truss rod. I love the neck! At 1 3/4 inches, there's more room for fingerpicking, and this thing sounds great for strumming as well. Very balanced with nice lows for the size. To me this sounds better than anything in the price range, regardless of size.
20. Martin Gpc-11e Road Series Acoustic-Electric Guitar

Product Details:
Excellent versatility. exquisite playability. the martin gpc-11e road series electro acoustic provides everything the modern performer wants in an electro acoustic guitar. you'll have a stunning tonal range at your fingertips. a sitka spruce top brings a broad dynamic range, while sapele used for the gpc-11e's back and sides can easily accommodate any genre. so you'll never be held back in what you can play.having one of these in your hands is a complete joy. its cutaway body shape provides uninhibited access to the very top of the guitar's scale. this means you can play freely at the high end without restriction. and its smooth playing hardwood neck brings a speedy playing action. combine all of this with high-performance fishman electronics that give you clarity in your live sound, and you've got a sensational all-round acoustic that gives you everything you need. and much more.
Specifications:
Construction | Mortise & Tenon Neck Joint |
Body Size | Grand Performance 14 Fret Cutaway |
Top Material | Sitka Spruce |
Rosette | MOP Pattern with Multi-Stripe |
Bracing Pattern | X Brace |
Brace Shape | Scalloped |
Brace Material | Sitka Spruce |
Brace Size | 5/16" with 1/4" Tone Bars |
Back Material | Sapele |
Side Material | Sapele |
Binding | Black |
Top Inlay Material | Multi-Stripe |
Neck Material | Select Hardwood |
Neck Shape | Performing Artist |
Neck Taper | High Performance Taper |
Plek | Yes |
Nut Material | White Corian |
Headstock Shape | Solid with Standard Taper |
Headplate Material | HPL |
Headplate Logo Style | Script Ink |
Heelcap | Black |
Fingerboard Material | FSCA Certified Richlite |
Scale Length | 25.4" |
Neck Joins Body At | 14th Fret |
Number of Frets Total | 20 |
Fingerboard Width at Nut | 1 3/4" |
Fingerboard Width at 12th Fret | 2 1/8" |
Fingerboard Inlay Material | MOP Pattern |
Fingerboard Inlay Style | MOP Pattern Dots- 28 Style Pattern |
Side Dots | White |
Back and Side Finish | Satin |
Back and Sides Color | Cherry |
Finish Top | Gloss |
Top Color | Clear |
Finish Neck | Hand Rubbed |
Bridge Material | FSCA Certified Richlite |
Bridge Style | Modern Belly – Drop in Saddle |
Bridge String Spacing | 2 5/32" |
Saddle | Compensated White Tusq |
Saddle Radius | 16" |
Tuning Machines | Chrome Enclosed Gear |
Recommended Strings | Lifespan 2.0 Auth Acoustic MA540 Phosphor Light |
Knob | Small |
Bridge Pin Material | White Plastic |
Bridge Pin Dots | Black Plastic |
Pickguard | Faux Tortoise |
Electronics | Fishman MX-T |
Manufacturer Part Number (MPN) | MAT GPC11E |
Reviews:
I really like the size and sound of the Grand Performance Martin guitars. The low end has enough "boom" and higher end "sparkles." The construction of this guitar with solid sapele back and sides and a solid spruce top helps to bring out the sounds I like so well in Martin guitars. I've played a DRS1, DRS2, an 000-10e, a GPC-13e and this GPC-11e, and they are all consistent and well built. I really like the new pickup systems that they've added to the new series in as much as it includes the lighted tuner inside the sound hole. The fingerboard is smooth and fast; I like the Richlite. Sapele is a lot like Mahogany, so this is a very fine combination of woods. The tuners hold it in tune just fine. The bag it comes with is nicer than I had expected, it gives good protection. Not like a real hard-sided case, but good. And it's lightweight but with a strong zipper. Good tone wood is getting harder to source for these guitar makers. I'm very happy I could find a gem like this one with these fine materials.Boomer
+ I have chosen this type of guitar for fingerstyle, but this is also an excellent guitar for playing, both as a mediator and for strumming. Comfortable space between strings. Comfortable shape. Great sound. It's a real allrounder. Very comfortable neck (I'm used to a fender player strat, which I also love). Tuning machines are stable. – It is difficult to play right out of the box – very high string action. Taking a barre at the first fret was not an easy task. Wore to the master for tuning. Corrected the neck nut – now playability is excellent. Not visible to the eyes, but master told about frets irregularities. It seems that sanding will be required to align, but I don’t hear any problems, so maybe a little later. + The soft case isn't what I bought for, but it's a cool thing. Strict and stylish. Already useful. Overall, I am satisfied and would recommend the guitar.
Overall: I have bought and played so many electric guitars over the years and never really looked into buying an acoustic guitar for myself. I have an old epiphone acoustic laying around that was given to me by a friend years ago, but I never bought a decent one to play for myself. So I went about on YouTube of course to look at some reviews. There’s a lot of acoustic guitars out there so it’s very hard to make a decision based on them alone. I really did want a Martin so I knew that much. and, at that time thought they were very expensive. that they were really expensive.Then I found a really nice review of this Martin guitar and a Taylor. To me the Martin blew it away, and that had me sold. The only thing that bothered me was that I couldn’t play the Martin because I don’t have any music stores close to me. So I just decided to buy this, and boy am I satisfied! I’ve had it for a week now and I just love it. The sound is BIG and it’s a very, very light acoustic guitar. The setup is great out of the box and I think it’s a great guitar for the money. I know that maybe there is a guitar out there that may sound better and might be cheaper, but I just don’t have the time to go that deep into researching the internet to find one. And I have played Martins before, so I trusted the name. If you are looking to buy an acoustic for anything you are doing, this is a great choice of guitar to get. I’m very happy with my purchase, and zZounds makes it very easy to pay, I may add. Don’t hesitate on this guitar. It plays great, sounds great and looks wonderful! I’m very happy with my purchase! Also, it sounds great plugged in and the tuner right below the high E string is very nice to have in there. You don’t even notice it’s there when you aren’t tuning the guitar. I put 4 stars for manufacturer support because I’ve never dealt with them. And hopefully never will.Billy
Related posts:
- Martin Lx1 Acoustic Guitar For Sale (Jan 2023 Update)
- Martin Lx1 Little Martin Acoustic Guitar For Sale (Jan 2023 Update)
- Martin Lx1 Little Martin Acoustic Guitar Natural For Sale (Jan 2023 Update)
- Martin Lx-1 Little Martin Acoustic Guitar For Sale (Jan 2023 Update)
- Martin Goya Classical Guitar For Sale (Jan 2023 Update)
- Martin Travel Acoustic Guitar For Sale (Jan 2023 Update)
- Martin X Series Guitar For Sale (Jan 2023 Update)
- Martin Custom X Series Acoustic Guitar For Sale (Jan 2023 Update)
- Martin R 18 Archtop Guitar For Sale (Jan 2023 Update)
- Martin X Series Custom X1-De Dreadnought Acoustic-Electric Guitar Natural For Sale (Jan 2023 Update)