Are you looking for the Martin D-10E Road Series Acoustic Electric Guitar? If so, you’ve come to the right place.
Choosing the Martin D-10E Road Series Acoustic Electric Guitar can be difficult as there are so many considerations, such as Fender, Martin. We have done a lot of research to find the top 20 Martin D-10E Road Series Acoustic Electric Guitar available.
The average cost is $952.19. Sold comparable range in price from a low of $499.00 to a high of $1949.00.
Based on the research we did, we think Martin SC-10E Acoustic Electric Guitar is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Martin D-10E Road Series Acoustic Electric Guitar (20 Sellers)
Product Image | Product Name | Features | Check Price |
---|---|---|---|
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
$1299.00
4.7
Reviewers Noted:
Sound quality . Weight . Visual appeal . Craftsmanship
Features:
- Sitka spruce top
- Koa fine veneer back & sides
- Select hardwood neck
Reviewers Noted:
Good sound quality . Craftsmanship . Visual appeal
Features:
- The 000 jr-10e auditorium junior acoustic-electric guitar comes factory-equipped with fishman's sonitone sound reinforcement system.
- This particular guitar has some pencil marks on the nut which can easily be buffed out if wanted to.
- It's in great condition and would be perfect for a smaller sized player or an excellent travel guitar for a full grown adult!
$899.00
4.9
Reviewers Noted:
Good sound quality . Attractive . Well made . Weight
Features:
- Beautifully designed auditorium-style acoustic-electric offers portability and wonderful playability
- Solid all-sapele body for rich, full tone
- Ideal fingerpicking guitar that also opens up when flatpicked
$599.99
4.9
Reviewers Noted:
Good sound quality . Attractive . Well made . Weight
Features:
- Beautiful and easy-playing martin 000-10e. this guitar is in great shape and is ready for a new home.
- 100% solid wood, top, back and sides! the sapele wood looks amazing and offers a smooth, warm tone that is a great compliment to the voice.
- The electronics are great – no ugly mounting on the side of the guitar, just a simple volume, tone, and digital tuner in the soundhole.
$779.99
4.9
Reviewers Noted:
Good sound quality . Durability . Craftsmanship
Features:
- Dreadnought 14 fret top wood.
- Sitka spruce back and sides wood.
- Sapele bridge material.
$1075.00
4.9
Reviewers Noted:
Good sound quality . Attractive . Durability . Craftsmanship
Features:
- Solid sitka gloss top w/ solid sapele gloss back & sides
- Fishman mx-t electronics
- 14 fret dreadnought shape
$988.38
4.8
Reviewers Noted:
Good sound quality . Attractive . Durability . Craftsmanship
Features:
- Solid sitka spruce top, solid siris back and sides; gloss finish
- Sitka spruce x bracing, non-scalloped
- Mother-of-pearl pattern with multi-stripe rosette
$688.52
4.8
Reviewers Noted:
Good sound quality . Attractive . Well made . Lightweight . Durable
Features:
- Body size: d-14 fret.
- Top: solid sapele.
- Rosette: single ring.
$775.00
4.8
Reviewers Noted:
Good sound quality . Attractive . Well made . Lightweight . Durable
Features:
- Martin drsgt, 14-fret dreadnought-style electro acoustic guitar, spruce and sapele construction, natural finish, includes hardshell case
- All-solid tonewoods, classic dreadnought body shape with fishman sonitone usb electronics
- Professional-quality electronics
$499.00
4.7
Reviewers Noted:
Good sound quality . Well made . Durability . Attractive . Weight
Features:
- Martin lx1e.
- In ex-demo condition, not a scratch on it.
- These have become the guitars which all travel guitars are judged by, a great little guitar.
$949.00
4.8
Reviewers Noted:
Good sound quality . Attractive . Well made . Durable . Lightweight
Features:
- Solid sitka top
- Solid sapele back & sides
- Fishman mx-t electronics
Reviewers Noted:
Sound quality . Durability
Features:
- 830" neck thickness at 1st fret
- 870" neck thickness at 9th fret
- Includes: original gigbag
Reviewers Noted:
Good sound quality . Attractive . Well made . Durability . Weight
Features:
- Authorized dealer
- Fishman mx electronics reliable, solid sound
- Mortise/tenon neck joint enhanced stability, sustain and strength
Reviewers Noted:
Good sound quality . Attractive . Durable . Weight . Craftsmanship
Features:
- The d-16e comes equipped with fishman matrix vt enhance nt2 electronics.
- Strung with martin authentic acoustic lifespan 2.0 light gauge strings.
- Includes premium martin soft bag.
Reviewers Noted:
Attractive . Good sound quality . Craftsmanship . Durability
Features:
- A mexican martin in near mint condition
- Features of the martin d-x2e-01 sitka/koa pre-owned western guitar
- Sitka spruce top
Reviewers Noted:
Good sound quality . Attractive . Durable . Well made . Lightweight
Features:
- Road seriesdrs1
- Dreadnought
- All solid sapele
Reviewers Noted:
Good sound quality . Durability . Visual appeal
Features:
- X series dreadnought
- Solid sitka spruce top
- Hardwood neck & fingerboard
Reviewers Noted:
Sound quality . Visual appeal . Craftsmanship
Features:
- High-pressure laminate koa pattern top, back and sides
- Rust birch laminate neck with performing artist neck shape and high performance taper
- Fsc certified richlite fretboard and bridge
$1849.99
4.9
Reviewers Noted:
Good sound quality . Durable . Attractive . Well made . Weight
Features:
- Body type: dreadnought
- Cutaway: no
- Top wood: sitka spruce
$1799.00
5.0
Reviewers Noted:
Sound quality
Features:
- Amazing playability, comfort, and versatility
- Low-profile velocity neck shape
- Tailored x-bracing
1. Martin Sc-10e Acoustic Electric Guitar

Product Details:
The martin sc-10e road series electro-acoustic is dreamy in playability and heavenly in sound. afterall, it is a martin, so you can count on premium quality. don't be deceived by its small size – not only is it great for taking on the road, but it also boasts glorious sound projection. crafted from koa and adorned with a sitka spruce top, the body resonates with sparkle, depth, and glistening clarity. every chord you play will be magnificent. plus, thanks to an exquisite ebony fretboard, you'll have a silky-smooth surface to fret upon, as well as luscious sustain carrying each note. whether you're practising at home or captivating your awestruck audience, pristine playability is a must. the sleek sure align neck system and handy cutaway allow you to waltz effortless across the frets, sliding right to the top of the scale with ease. it's a seamless playing experience you won't be able to get enough of. and when you're ready to plug in and amp up, utilise the fishman mx-t electronic system – it is expertly designed to enhance your dazzling acoustic sound.
Specifications:
Edition Size | Open |
Construction | Sure Align Linear Dovetail Neck Joint |
Body Size | S-13 Fret Cutaway |
Top Material | Sitka Spruce |
Rosette | Aperture Design with Multi-Stripe |
Bracing Pattern | Tone Tension X Brace |
Brace Material | Sitka Spruce |
Brace Size | 5/16" with 1/4" Tone Bars |
Back Material | Koa Fine Veneer |
Side Material | Koa Fine Veneer |
Binding | Black |
Top Inlay Material | Multi-Stripe |
Neck Material | Select Hardwood |
Neck Shape | Low Profile Velocity |
Neck Taper | High-Performance Taper |
Plek | Yes |
Nut Material | White Corian |
Headstock Shape | Solid with Square Taper |
Headplate Material | Ebony |
Headplate Detail | Do Not Use |
Headplate Logo Style | Silver Script Overlay |
Fingerboard Material | Ebony |
Scale Length | 25.4" |
Neck Joins Body At | 13th Fret |
Number of Frets Total | 20 |
Fingerboard Width at Nut | 1 3/4'' |
Fingerboard Width at 12th Fret | 2 1/8'' |
Fingerboard Inlay Material | Mother of Pearl Pattern and Black Sparkle Dot |
Fingerboard Inlay Style | SC-10 Style |
Side Dots | White |
Back and Side Finish | Satin |
Finish Top | Satin |
Top Color | Clear |
Finish Neck | Satin |
Bridge Material | Ebony |
Bridge Style | Sloped Modern Belly – Drop in Saddle |
Bridge String Spacing | 2 5/32" |
Saddle | Compensated White Tusq |
Saddle Radius | 16" |
Tuning Machines | Black Open Gear |
Recommended Strings | Acoustic Custom Light S535T |
Knob | Butterbean |
Bridge Pin Material | Black Plastic |
Bridge Pin Dots | White Plastic |
Pickguard | Tortoise Pattern |
Electronics | Fishman MX-T |
Manufacturer Part Number (MPN) | 11SC10E-01 |
Reviews:
This is another addition to my earlier post I still like the guitar as I mentioned before but when I just now went to record using the pickup system I was not pleased. At least to my ears it sounds like a very low end piezo under the bridge like the earliest kinds in the 80's buzzy and thick lacking in any of the subtle sounds I get playing it acoustically.Petros
Up front I like brighter sounding acoustics (and electrics) and this model Martin was a real revelation. It feels like an electric neck to me so easy to play and the workmanship is outstanding. I was a little thrown by the bolt in neck but I get it now, it allows for owner adjustments (though I would still take it to a luthier) but what floored me was how singing this guitar is all the way up, even chords up at the 12+ frets sound full and loud. This is a pretty darn loud guitar. It has a nice deep penetrating low end but not a fat low end like a more traditional expensive Martins it has bite but a very appealing musical bite. (Think P90 as opposed to Humbuckers) (I'm speaking only played acoustic have not plugged it in yet) again I like it because it sings with a great sustain but not too much low end which can be difficult to record and sing against. Notes just seem to push tone out I was able to push this guitar until it seemed like the strings were rubber bands but it never quit it just kept the tone clear and ringing. Love the design of the bouts feels great to have on your lap. It sounded great flat picked finger picked nail picked strummed hammered pulled nothing did not sound excellent to my ears. I also tried a Taylor 214 CE K which I thought sounded great on videos but wow it sounded choked in many ways and chords that barked out and shouted on the Martin sounded muffled and pretty weak on the Taylor. That's when I decided this Martin was it. (In some ways this guitar sounds like a 12 string because of the bell like clarity and definition just what I was looking for).Petros
2. Martin Junior 000cjr-10e Acoustic-Electric Guitar

Product Details:
The martin junior series is designed for players looking for big sound in a slightly smaller body. now available for the first time with a cutaway, the auditorium style 000cjr-10e features sapele back and sides, which offer warm tones with a strong midrange response. it includes a sitka spruce top for added warmth and projection and a hand-rubbed neck with a high-performance taper for ease of playability. this model also sports a soft back edge to provide maximum comfort while playing. the 000cjr-10e is equipped with fishman sonitone electronics and includes a soft gig bag for easy transport so you can take your music anywhere. strung with retro light gauge strings.
Specifications:
Construction | Mortise & Tenon Neck Joint |
Body Size | 000 Junior 14 Fret Cutaway |
Top Material | Sitka Spruce |
Rosette | MOP Pattern with Multi-Stripe |
Bracing Pattern | X Brace |
Brace Shape | Scalloped |
Brace Material | Sitka Spruce |
Brace Size | 1/4" |
Back Material | Sapele |
Side Material | Sapele |
Binding | Black |
Top Inlay Material | Multi-Stripe |
Neck Material | Select Hardwood |
Neck Shape | Junior |
Neck Taper | High Performance Taper |
Plek | Yes |
Nut Material | White Corian |
Headstock Shape | Solid with Junior Taper |
Headplate Material | HPL |
Headplate Logo Style | Script Ink |
Fingerboard Material | FSC Certified Richlite |
Scale Length | 24'' |
Neck Joins Body At | 14th Fret |
Number of Frets Total | 20 |
Fingerboard Width at Nut | 1 3/4'' |
Fingerboard Width at 12th Fret | 2 1/8'' |
Fingerboard Inlay Material | Mother of Pearl Pattern |
Fingerboard Inlay Style | Style 28 |
Side Dots | White |
Back and Side Finish | Satin |
Back and Sides Color | Cherry |
Finish Top | Satin |
Top Color | Clear |
Finish Neck | Hand Rubbed |
Bridge Material | FSC Certified Richlite |
Bridge Style | Junior Style Belly |
Bridge String Spacing | 2 5/32" |
Saddle | Compensated White Tusq |
Saddle Radius | 16" |
Tuning Machines | Chrome Enclosed Gear |
Recommended Strings | Retro Light MM12 |
Knob | Small |
Bridge Pin Material | White Plastic |
Bridge Pin Dots | Black Plastic |
Electronics | Fishman Sonitone |
Reviews:
For the money, I couldn't find a better acoustic guitar (A new one anyways). I've owned many high end Martins, but I wanted something that was easy to travel with and I wouldn't worry about if it got scratched/dented. Out of the box the action and intonation were very close to perfect. I adjusted the truss rod myself to fit my playing preference, and the intonation was so close I doubt anyone will notice when playing further up the neck. The building materials are not great, but once again, "for the money"… My only con is they don't have a hard shell case for this particular model. The included soft shell case is still convenient, but I kind of wish they'd make a HSC like they did for the dreadnaught model.Garrett G.
This guitar is good for the money. Neck straight. All workmanship is precise. Light and not overly heavy from clear coat gunk. Neck is short but wide. Strings that came on it went in trash in 5 min. Use Lixrs on these small guitars. Nuff said…Not too small like Martin mini where you fight it not to be a uke and it really is. Quality is near perfect. Case is the good one like the minis. Doesnt feel like a GS mini which feels too small. This guitar feels good but smaller that normal. Set up fine out of box (which is more than I can say for the USA models). Ready to play. I will prob change out stock pickup for DTar syemour duncan wavelength solo later. Not that the stock pickup is bad; just like seymour better for acoustic under saddle "non-quack" pickup. If you know how to use an eq then dnot need that extra tone button anyway, plus fihsman is kind of not great stuff. After about 10yrs needed something better. Buy one before Martin decides not to make them anymore…Kokbloock
Overall: I purchased this guitar for practice, and to record licks for quick pre-production ideas. My Taylor GS Mini does not have electronics and I wanted to add a Martin to my collection anyway. When plugged in the Martin sounds very rich and there is almost no sound degradation between plugged and mic’d, very impressive! The fingerboard is wider than the one on my Taylor GS and as a result is much easier to play for me. This guitar is not as rich sounding or as comfortable as my Washburn 55 Comfort Series but the sound, the cut-away, and the small size makes this my choice for those quick pre-productions or gigs.Installation of an onboard tuner would make this guitar perfect in my opinion.
3. Martin 000-10e Road Series

Product Details:
Any way you look at it, the martin 000-10e a great solid-wood guitar at an unbeatable price. the 000-10e features an all-solid sapele body, which produces a nicely-balanced warm sound. this guitar is soft and sweet—certain to inspire any songwriter, and it's a comfortable size that will fit nicely in the living room. its satin finish is understated and subtle, and with fishman mx-t electronics under the hood, the 000-10e is ready for any stage. deluxe martin soft-shell case included. as the name “road series” implies, here’s a great-sounding martin guitar that’s ready to go on tour.
Specifications:
Construction | Mortise & Tenon Neck Joint |
Body Size | 000-14 Fret |
Top Material | Sapele |
Rosette | Multi-Stripe |
Bracing Pattern | X Brace |
Brace Shape | Non-Scalloped |
Brace Material | Sitka Spruce |
Brace Size | 5/16" with 1/4" Tone Bars |
Back Material | Sapele |
Side Material | Sapele |
Neck Material | Select Hardwood |
Neck Shape | Performing Artist |
Neck Taper | High-Performance Taper |
Plek | Yes |
Nut Material | White Corian |
Headstock Shape | Solid with Standard Taper |
Headplate Material | HPL |
Headplate Logo Style | Script Ink |
Heelcap | Black |
Fingerboard Material | FSCÂ Certified Richlite |
Scale Length | 24.9'' |
Neck Joins Body At | 14th Fret |
Number of Frets Total | 20 |
Fingerboard Width at Nut | 1 3/4" |
Fingerboard Width at 12th Fret | 2 1/8" |
Fingerboard Inlay Material | MOP Pattern |
Fingerboard Inlay Style | MOP Pattern Dots- 28 Style Pattern |
Side Dots | White |
Back and Side Finish | Satin |
Back and Sides Color | Cherry |
Finish Top | Satin |
Top Color | Cherry |
Finish Neck | Hand-Rubbed |
Bridge Material | FSCÂ Certified Richlite |
Bridge Style | Modern Belly – Drop in Saddle |
Bridge String Spacing | 2 5/32" |
Saddle | Compensated White Tusq |
Saddle Radius | 16" |
Tuning Machines | Chrome Enclosed Gear |
Recommended Strings | MA540T |
Knob | Small |
Bridge Pin Material | White Plastic |
Bridge Pin Dots | Black Plastic |
Pickguard | Faux Tortoise |
Electronics | Fishman MX-T |
Reviews:
This guitar is wonderful. I upgraded from an entry-level dreadnought that was really challenging for me to play. I love the beautiful tones this body produces, I love the look and feel of the 000 build, and I'm happy with my progress since investing. Very satisfied with my purchase.AMY
This is a very nice acoustic. I played it a few times before I purchased it. The volume and tone dials are a little awkward to get to since they are in the top portion of the sound hole. The tuner is nice in the bottom of it. I was really surprised by how thin the neck profile is. The soft side case is excellent! For the price is was really astounded! It is not a US made but it is made in North America and it's a Martin!Dave
Let me begin by saying that I've owned a number of Martins over the years – my first "good" guitar was a D28 many moons ago. In that time, I've never seen Martin's quality falter and this guitar is no exception. Tone, construction, and playability are all top-notch. Within the past couple of years, Ive found that a mahogany-topped guitar suits my singing voice and the 000 10 was chosen for that fact. This guitar has a darker, woody tone that sits well with the male voice (IMO). It's warmth and articulation work great for the fingerstyle playing I do (but it certainly holds up to a pick as well with no complaints). The 1 3/4 inch nut and performance neck are very comfortable over a long period. I enjoy small guitars (0, 00) but the bottom end can sometimes lack in those sizes. The 000 is a perfect compromise – a tight, comfortable waist but enough width in the lower bout to produce a pleasing bass response. What more can I say? All in all, 5 stars for this guitar!dawilcox
4. Martin Road Series 000-10e Natural

Product Details:
Beautiful and easy-playing martin 000-10e. this guitar is in great shape and is ready for a new home. 100% solid wood, top, back and sides! the sapele wood looks amazing and offers a smooth, warm tone that is a great compliment to the voice. i compared this head-to-head to a martin 000-15 in-store, and believe it or not, i preferred this road series! the neck is a slim oval shape, and with nice low action (plenty of adjustment room left) this guitar is awesome for someone who plays a lot of electric and is looking for a similar feeling neck and playability. the electronics are great – no ugly mounting on the side of the guitar, just a simple volume, tone, and digital tuner in the soundhole. condition-wise, there are a few minor/difficult to see nicks and dings. there are scratches on the pickguard (of course!). frets are in good shape at 90% life imo. high-end martin gigbag included!
Specifications:
Reviews:
This guitar is wonderful. I upgraded from an entry-level dreadnought that was really challenging for me to play. I love the beautiful tones this body produces, I love the look and feel of the 000 build, and I'm happy with my progress since investing. Very satisfied with my purchase.AMY
This is a very nice acoustic. I played it a few times before I purchased it. The volume and tone dials are a little awkward to get to since they are in the top portion of the sound hole. The tuner is nice in the bottom of it. I was really surprised by how thin the neck profile is. The soft side case is excellent! For the price is was really astounded! It is not a US made but it is made in North America and it's a Martin!Dave
Let me begin by saying that I've owned a number of Martins over the years – my first "good" guitar was a D28 many moons ago. In that time, I've never seen Martin's quality falter and this guitar is no exception. Tone, construction, and playability are all top-notch. Within the past couple of years, Ive found that a mahogany-topped guitar suits my singing voice and the 000 10 was chosen for that fact. This guitar has a darker, woody tone that sits well with the male voice (IMO). It's warmth and articulation work great for the fingerstyle playing I do (but it certainly holds up to a pick as well with no complaints). The 1 3/4 inch nut and performance neck are very comfortable over a long period. I enjoy small guitars (0, 00) but the bottom end can sometimes lack in those sizes. The 000 is a perfect compromise – a tight, comfortable waist but enough width in the lower bout to produce a pleasing bass response. What more can I say? All in all, 5 stars for this guitar!dawilcox
5. Martin Drs2 Road Series Acoustic/electric Guitar

Product Details:
A masterful electro acoustic. it's about time you experienced everything that a guitar should be. the martin drs2, natural is exactly that. martin have poured every drop of their guitar crafting ability into making this one of their best performing models yet. it offers terrific tone, amazing amplification, and perfect playability.embrace a tonal range that will never fail to delight. sapele, sitka spruce, and select hardwood in the drs2's construction give you brilliant tone at any pitch. you'll enjoy superb playing comfort thanks to a tapered neck. and you can plug in and play with tremendous clarity anywhere thanks to a fishman pickup. a fantastic instrument in every way.
Specifications:
Top Wood | Sitka Spruce |
Back and Sides | Sapele |
Construction | Mortise/Tenon Neck Joint |
Body Size | D-14 Fret |
Top Bracing Pattern | A-Frame ''X-1'' |
Top Braces | Solid Sitka Spruce 5/16'' |
Back Material | Solid Sapele |
Binding | Black Boltaron |
Neck Material | Rust Stratabond |
Neck Shape | Modified Low Oval |
Nut Material | White Corian |
Fingerboard Material | Black Richlite |
Scale Length | 25.4'' |
Number Of Frets Clear | 14 |
Number Of Frets Total | 20 |
Bridge Material | Black Richlite |
Bridge Style | Belly |
Interior Label | Paper Label |
Reviews:
I was very impressed with it. It is not a top of the line Martin, nor was my Maton, but I feel it was a step up for me. I found the neck,action,tone simply amazing. It is a fuller richer tone which is saying something because the Maton was pretty damn good. As it is a Dreadnaught, this may be partly responsible for the better tone, but I haven't stopped grinning since I got it home. I changed the strings, Elixir acoustics and that made it even better.bluestone5410
Having only played low priced beginner acoustic guitars I really didn't quite know what to expect. My decision to buy this came from reading nothing but good reviews and from a very well known reputation. When I opened the case my first thought was that this looks like any other guitar that I've had and I hope I didn't just waste so much money on yet another "gimmick lefty" guitar, as there are so many. Being open minded though I fine tuned the strings and strummed a chord for the first time, then another, and another and my jaw dropped down so low it bounced off the top of guitar. This guitar sounds amazing and is such a joy to play. It only took a few seconds to realize that this was indeed money well spent. I had no idea an acoustic guitar could sound like this without being altered in a studio setting, I am very impressed and totally satisfied.The Ghost
Martin has been known for having some of the best acoustic guitars out there in the market and the DSR2 is a great example that you don't have to spend over $1000 to get a good acoustic. Solid Maple top and solid Sapele back and sides lends itself to a gorgeous warm tone. A nice plus is that this is one of the few guitars under $1000 that comes with a hardshell case. If you can afford it, snag this up quick.Tim
6. Martin D-12e Road Series Acoustic-Electric Guitar

Product Details:
The martin road series are the perfect instruments for any musician on the go. new for 2019, the d-12e features martin's time-tested dreadnought body, constructed of a solid sitka spruce top and solid sapele back and sides. all in all, it's an impressive guitar at an even more impressive price. the d-12e sports a gorgeous gloss body finish with a style-28 multi-stripe rosette and style-18 purfling on the back. with fishman mx-t electronics under the hood, the d-12e is ready for any stage. plus, it has a built in soundhole tuner that automatically mutes the output so you can tune up any time without a goofy tuner clipped on your headstock. the d-12e also includes martin's new premium soft shell case, so it is road-ready—the perfect companion on all of your adventures!
Specifications:
Construction | Mortise & Tenon Neck Joint |
Body Size | D-14 Fret |
Top Material | Sitka Spruce |
Rosette Style | 28 Multi-Stripe |
Bracing Pattern | X Brace |
Brace Shape | Non-Scalloped |
Brace Material | Sitka Spruce |
Brace Size | 5/16 inch with 1/4 inch Tone Bars |
Back Material | Sapele |
Back Purfling/Strip | Style 18 |
Side Material | Sapele |
Binding | Black |
Top Inlay Material | Multi-Stripe |
Neck Material | Select Hardwood |
Neck Shape | Performing Artist |
Neck Taper | High Performance Taper |
Plek | Yes |
Nut Material | White Corian |
Headstock Shape | Solid with Standard Taper |
Headplate Material | HPL |
Headplate Logo Style | Script Ink |
Heelcap | Black |
Fingerboard Material | FSCA Certified Richlite |
Scale Length | 25.4 inches |
Neck Joins Body At | 14th Fret |
Number of Frets Total | 20 |
Fingerboard Width at Nut | 1 3/4 inches |
Fingerboard Width at 12th Fret | 2 1/8 inches |
Fingerboard Inlay Material | MOP Pattern |
Fingerboard Inlay Style | MOP Pattern Dots- 28 Style Pattern |
Side Dots | White |
Back and Side Finish | Gloss |
Back and Sides Color | Dark Mahogany |
Finish Top | Gloss |
Top Color | Clear |
Finish Neck | Hand Rubbed |
Bridge Material | FSCA Certified Richlite |
Bridge Style | Modern Belly – Drop in Saddle |
Bridge String Spacing | 2 5/32 inches |
Saddle | Compensated White Tusq |
Saddle Radius | 16 inches |
Tuning Machines | Nickel Open Gear |
Recommended Strings | Lifespan 2.0 Auth Acoustic MA550 Phosphor Medium |
Knob | Butterbean |
Bridge Pin Material | Black Plastic |
Pickguard | Black |
Electronics | Fishman MX-T |
Reviews:
Ever since I bought a DRS2 some years ago I've been favorably impressed with the Martin products coming out of Mexico. This guitar has top-notch craftsmanship, so it's beautiful, the neck is plecked and the action is buttery,the tone is quite full and rich (you may need to experiment with different types and guages of strings), and the sound will improve as the tonewoods age. I actually prefer the tone of sapele back and sides because, to my ears, it has the midrange of mahogany AND the bass and sparkle of rosewood. It's the best of both! That makes this guitar a great workhorse for any occasion. I am quite happy with this guitar and I think you will be also.
I couldn't be more impressed with the Martin Road Series. Mine is the d12e. Well constructed, well set up out of the box. It looks beautiful. For the price it's amazing what Martin has done with the Road Series. I played the 10e at the local store and the GAS turned on immediately. I started looking into them and opted for the gloss finish 12e. The stock strings left much to be desired. I can't say if they were old or just were not my thing. I changed to Elixir phosphor bronze nanowebs which are my favorite acoustic strings. The sound from this guitar is hands down great. Well balanced with good projection. Warm across the lows, nice midrange with crisp highs. I would describe the sound middle ground of a traditional Martin and Taylor. Plugging in to a Fishman Loudbox Mini really presented the wow factor. Between the onboard eq and the amp I could get beautiful sounding chords and articulate single notes that had a definite bloom. The onboard tuner is something I really like, and wanted. It stays in tune well and sounds great with standard or alternate tunings. Dunlop Tortex picks are the bees knees with it, and finger picking sounds nice as well. Absolutely awesome bargain with this guitar. Made in Mexico, but that is fine with me. It's in Martins's Mexico factory built to their design, quality, and specs. They did a good job and I couldn't be happier.RE
7. Martin D-13e Road Series Acoustic-Electric Guitar

Product Details:
Utilizing renowned martin build techniques, solid-wood construction and fishman electronics, the d13e dreadnought from the road series is a cut above the rest! newly updated in 2019, the series features a stunning mother-of-pearl pattern in the fingerboard and rosettes. all models include martin’s high-performance neck taper for added comfort as well as satin and gloss finish options and a variety of tonewoods. perhaps the most notable update to the road series is the addition of discreet fishman mx-t electronics with a built-in soundhole tuner that auto mutes the audio output so you can tune up any time without using a pedal. all road series guitars come with a premium soft shell case.
Specifications:
Construction | Mortise & Tenon Neck Joint |
Body Size | D-14 Fret |
Top Material | Sitka Spruce |
Rosette | MOP Pattern with Multi-Stripe |
Bracing Pattern | X Brace |
Brace Shape | Non-Scalloped |
Brace Material | Sitka Spruce |
Brace Size | 5/16" with 1/4" Tone Bars |
Back Material | Siris |
Side Material | Siris |
Binding | White |
Top Inlay Material | Multi-Stripe |
Neck Material | Select Hardwood |
Neck Shape | Performing Artist |
Neck Taper | High Performance Taper |
Plek | Yes |
Nut Material | White Corian |
Headstock Shape | Solid with Standard Taper |
Headplate Material | HPL |
Headplate Logo Style | Script Ink |
Heelcap | White |
Fingerboard Material | FSCA Certified Richlite |
Scale Length | 25.4" |
Neck Joins Body At | 14th Fret |
Number of Frets Total | 20 |
Fingerboard Width at Nut | 1 3/4" |
Fingerboard Width at 12th Fret | 2 1/8" |
Fingerboard Inlay Material | MOP Pattern |
Fingerboard Inlay Style | MOP Pattern Dots- 28 Style Pattern |
Side Dots | White |
Back and Side Finish | Gloss |
Back and Sides Color | Rosewood |
Finish Top | Gloss |
Top Color | Clear |
Finish Neck | Hand Rubbed |
Bridge Material | FSCA Certified Richlite |
Bridge Style | Modern Belly – Drop in Saddle |
Bridge String Spacing | 2 5/32" |
Saddle | Compensated White Tusq |
Saddle Radius | 16" |
Tuning Machines | Chrome Enclosed Gear |
Recommended Strings | Lifespan 2.0 Auth Acoustic MA550 Phosphor Medium |
Knob | Small |
Bridge Pin Material | Black Plastic |
Pickguard | Faux Tortoise |
Electronics | Fishman MX-T |
Manufacturer Part Number (MPN) | MAT D13E |
Reviews:
Sound: It sounds like a Martin acoustic guitar. Maybe it doesn't have quite the oomph of a D18 or D28 but this thing will fill a room and no one will have any doubt that someone brought a Martin to the game. Features: The most useful feature is the Sitka Spruce top, Ziricote back and sides, X bracing, and everything else that makes up the sound engine of this guitar. I can't think of anything least about it. Ease of Use: How to get great sound. That's easy. Strum it one time. You'll be convinced. Quality: It's a Martin. Of course it's well made. The Road series is made in Mexico but the quality of this guitar will stand up to anything built here in the US of similar materials. Value: You could charge $2K for this guitar and get away with it. The price is a steal. Manufacturer Support: Never have had to deal with support of any kind. It worked right out of the case. Perfect intonation and it was even really close to being in tune. The Wow Factor: The appeal of this instrument is the sound. It has a plain square Martin headstock. The top is exactly like every other Martin made of Sitka spruce. The back and sides are a beautiful dark ziricote (admittedly a laminate, this is not a D28) but looking at this guitar, even if you couldn't hear it but you knew anything about guitars, you would be impressed with the sound 🙂 Overall: I have owned several expensive guitars in my life. One, from another manufacturer cost nearly $3000. Nothing I have owned even comes close to the sound of this. Completely acoustic it fills a room. It does exactly what Martin designed the dreadnought to do. This guitar walks into a room and says, "I'm here" in no uncertain terms. If you need a professional quality guitar but don't have $4000 to spend on a D28 then you could do no better. I love this guitar and I will put it's sound up against anything I have heard from any builder.Regan
I have been playing guitar for over 20 years, but lean towards playing electrics over acoustics. However, I wanted a reliable acoustic that sounded and played great without paying thousands of $$ for a US made Martin, Taylor, Gibson, etc. The Martin D13E seemed to fit the bill, but I couldn't find one near me so I went ahead and ordered one online. I was very pleasantly surprised by this guitar when it arrived. It sounds amazing, full and rich like you'd expect from a Martin dreadnought. I compared this to a comparably priced Taylor 214ce Dlx and the much preferred the Martin. Aesthetically, I'd give the Taylor an edge because it has a real ebony finger board and bridge (the D13E has Richlite) and a rosewood(?) overlay on the headstock (D13 has some sort of laminate over the headstock with a printed wood pattern). The Taylor also comes with a case. However, I find the D13E to have a much richer sound, possibly due to the all solid wood construction, and also better playability. These matter to me much more than aesthetics. The only real drawback for me is that it didn't come with a hardshell case. However, considering the price and the fact that it is all solid wood, I can't complain. I would recommend the guitar highly for intermediate players or professional musicians that want a workhorse guitar without having to risk bringing a $3000 guitar to gigs.Nate
Don't be concerned that this guitar is made outside of the USA. The Mexico factory has been up and running for a long time ,and it has the Martin standard of quality. . This is a solid wood guitar with a great sound. I walked into the store looking for something else. When I spotted it on the wall I decided to give it a go. A couple of strums and I was convinced. Love this guitar.Chuck
8. Martin Road Series Drs1 Acoustic Electric Guitar

Product Details:
Solid sapele, back front and sides. natural satin finish. martin smooth-playing modified low oval neck is built with multilaminate stratabond for extra rigidity and durability. the belly bridge and fingerboard are made of black richlite, which has a similar look and feel to ebony. the drs1 is equipped with the fishman sonitone pickup system, which gives you great-sounding plug-and-play output, onstage and in the studio. this is a guitar with beautiful tone and great action. sadly, i have too many guitars and some have to go. it is looking for a good home.
Specifications:
Reviews:
Like others, I've always wanted a domestically crafted Martin but just couldn't fit it in the budget. I'm sure the X series are great instruments but I did not want to settle for something other than a solid wood US made Martin if I were to purchase one. The MF sale and their 48 month, 0% financing deal made the choice a no brainer. I would consider myself an experienced novice in that I've been noodling on acoustics for 35 years give or take but electric bass has been my instrument of choice. That said I find this guitar easy and a joy to play and keeps me wanting to come back to it. The sound is bright and pleasant even when getting into the strings some. The quality is top notch and I went over this thing with a fine tooth comb. The absolute, only "flaw" I could find was that the pick guard was off center perhaps be .5 mm or so and the only way one would notice is if you follow the very minimal rosette around the sound hole you can gauge the position of the pick guard by following the thin white center line. There is no way you would notice this unless your eye is within 15 or so inches of the sound hole. The tuners seem decent quality, are marked "Martin", adjust smoothly and hold tune very well. The neck is comfortable and intonation is perfect as one would expect with the use of their PLEK machine to aid set up. To top things off the hard shell case fits the guitar perfectly, looks great and seems to be high quality. There is really no downside to this guitar and I wouldn't hesitate to advise anyone to purchase this guitar.Josh
I've had mine for four months, so I feel that I can make an honest evaluation and I'm every bit as impressed as I was on day one. I'm primarily an electric player, but I owned a couple of mid-range acoustics when I got this. I've since sold them because I knew I would never play them again. After steak, hot dogs just don't cut it. I always thought Martins were rather plain looking and still do, but what makes them so impressive is the playability and unequalled tone. The Custom D ranks right up there with the best in those categories. The satin finish is nice and while it may be psychological, I think it may give it a more open sound. You can definitely feel a ton of vibration in your body when playing. It doesn't show fingerprints or require polish either. In fact, Martin doesn't recommend polish. The factory installed strings are of the highest quality and great for chording, but if you use the entire fretboard or do a lot of bends like I do, you may want to consider something lighter. I changed to coated 10-47 extra lights and was surprised to find little to no loss in the low end. Now that I'm a Martin fan, I've considered trading up, but I just can't justify the extra cost for binding and a gloss finish. I'm sure the cork sniffers will tell me there's a whole lot more to it than that, but I think they would be hard pressed to distinguish a difference between this and a higher end model listening blindfolded. I've been playing for 48 years and have bought and sold many guitars during that span (regretting a few), and the Custom D is one of the best guitar purchases I've ever made. Oh yeah, everyone comments on the smell and it's no exaggeration. Hits you as soon as you open the case.Terry T
I wasn't expecting a whole lot with this guitar. I just wanted a guitar that I could take out in the elements and not have to worry about it. I also have a Taylor 314ce and Martin 000-15. This guitar is super comfortable to play, it's solidly built, and it sounds like a Martin! I tried the Taylor 114 first and it felt and sounded a bit cheap. This one is so much better than the Taylor 114. It has sustain for days (sure wasn't expecting that)! The 1.75" nut width and 24.9 length make it perfect for me. The fretboard is also superb, the richlite feels like ebony (super smooth), and the fretwork is spot on!EC
9. Martin Drsgt Road Series Acoustic Electric Guitar Gloss Top

Product Details:
The drsgt is an affordable 14-fret dreadnought road series guitar with a polished gloss sitka spruce top. featuring solid sapele back and sides and a one-piece solid sipo neck with black richlite fingerboard and bridge, the drsgt emulates the appearance,construction: mortise/tenon neck joint – body size: d-14 fret – top: solid sitka spruce – rosette: single ring – top bracing pattern: a-frame ''x-1''top braces: solid sitka spruce 5/16''back material: solid sapele – back purfling: none – side material: solid sapele – endpiece: black boltaron – endpiece inlay: none – binding: black boltaron – top inlay style: none – side inlay: none – back inlay: none – neck material: one -piece solid solid sipo – neck shape: modified low oval – nut material: white corian – headstock: solid/standard taper – headplate: indian rosewood pattern hplfingerboard material: black richlite – scale length: 25.4''number of frets clear: 14number of frets total: 20fingerboard width at nut: 1-11/16''fingerboard width at 12th fret: 2-1/8''fingerboard position inlays: style 28 with white abs dots – fingerboard binding: none – finish back & sides: satin – finish top: polished gloss – finish neck: satin – bridge material: black richlite – bridge style: belly – bridge string spacing: 2-1/8''saddle: 16'' radius/compensated/white tusq – tuning machines: chrome enclosed with small buttons – recommended strings: martin studio performance lifespan phosphor bronze medium gauge (msp7200)bridge & end pins: white with black dots – pickguard: black – case: 345 hardshell – interior label: paper label – electronics: fishman sonitone usb
Specifications:
Reviews:
Like others, I've always wanted a domestically crafted Martin but just couldn't fit it in the budget. I'm sure the X series are great instruments but I did not want to settle for something other than a solid wood US made Martin if I were to purchase one. The MF sale and their 48 month, 0% financing deal made the choice a no brainer. I would consider myself an experienced novice in that I've been noodling on acoustics for 35 years give or take but electric bass has been my instrument of choice. That said I find this guitar easy and a joy to play and keeps me wanting to come back to it. The sound is bright and pleasant even when getting into the strings some. The quality is top notch and I went over this thing with a fine tooth comb. The absolute, only "flaw" I could find was that the pick guard was off center perhaps be .5 mm or so and the only way one would notice is if you follow the very minimal rosette around the sound hole you can gauge the position of the pick guard by following the thin white center line. There is no way you would notice this unless your eye is within 15 or so inches of the sound hole. The tuners seem decent quality, are marked "Martin", adjust smoothly and hold tune very well. The neck is comfortable and intonation is perfect as one would expect with the use of their PLEK machine to aid set up. To top things off the hard shell case fits the guitar perfectly, looks great and seems to be high quality. There is really no downside to this guitar and I wouldn't hesitate to advise anyone to purchase this guitar.Josh
I've had mine for four months, so I feel that I can make an honest evaluation and I'm every bit as impressed as I was on day one. I'm primarily an electric player, but I owned a couple of mid-range acoustics when I got this. I've since sold them because I knew I would never play them again. After steak, hot dogs just don't cut it. I always thought Martins were rather plain looking and still do, but what makes them so impressive is the playability and unequalled tone. The Custom D ranks right up there with the best in those categories. The satin finish is nice and while it may be psychological, I think it may give it a more open sound. You can definitely feel a ton of vibration in your body when playing. It doesn't show fingerprints or require polish either. In fact, Martin doesn't recommend polish. The factory installed strings are of the highest quality and great for chording, but if you use the entire fretboard or do a lot of bends like I do, you may want to consider something lighter. I changed to coated 10-47 extra lights and was surprised to find little to no loss in the low end. Now that I'm a Martin fan, I've considered trading up, but I just can't justify the extra cost for binding and a gloss finish. I'm sure the cork sniffers will tell me there's a whole lot more to it than that, but I think they would be hard pressed to distinguish a difference between this and a higher end model listening blindfolded. I've been playing for 48 years and have bought and sold many guitars during that span (regretting a few), and the Custom D is one of the best guitar purchases I've ever made. Oh yeah, everyone comments on the smell and it's no exaggeration. Hits you as soon as you open the case.Terry T
I wasn't expecting a whole lot with this guitar. I just wanted a guitar that I could take out in the elements and not have to worry about it. I also have a Taylor 314ce and Martin 000-15. This guitar is super comfortable to play, it's solidly built, and it sounds like a Martin! I tried the Taylor 114 first and it felt and sounded a bit cheap. This one is so much better than the Taylor 114. It has sustain for days (sure wasn't expecting that)! The 1.75" nut width and 24.9 length make it perfect for me. The fretboard is also superb, the richlite feels like ebony (super smooth), and the fretwork is spot on!EC
10. Martin Lx1e Little Martin Acoustic Electric Guitar

Product Details:
Handmade with heavy-duty materials, time-tested styles, and innovative designs, the little martin series delivers classic acoustic guitars that any musician will love to play. these models are made from sustainable wood certified parts and are available in a variety of different wood types, so you can find the solid wood guitar that works best for your playing style and music type—rock, country, folk, bluegrass, jazz, pop, and much more. our little martin series guitars are ideal for beginners and a terrific student model for all ages and ability levels. the smaller acoustic guitar body makes it an ideal travel guitar. take it along to a fireside jam by the lake, or practice just about anywhere. each model delivers distinct features that add personality, performance, and playability to your instrument collection. it is an ideal starter guitar for kids, teens, or adults who want a solid acoustic guitar they can treasure for years to come. for nearly two centuries, martin has been producing premium gear for musical artists across the globe. martins superior guitar and string products remain the choice for musicians around the world for their unrivaled quality, craftsmanship, and tone. still handmade. still the standard. martin guitars are the real deal—not an imitation.
Specifications:
Finish | Natural |
Year | 2003 – 2022 |
Made In | Mexico |
Back Material | High Pressure Laminate |
Body Shape | Travel |
Finish Style | Satin |
Fretboard Material | Composite |
Number of Strings | 6-String |
On-board Electronics | Piezo Pickup |
Right / Left Handed | Right Handed |
Sides Material | High Pressure Laminate |
Top Material | Spruce |
Body type | Modified O-14 Fret |
Cutaway | Non-cutaway |
Top wood | Sitka Spruce |
Bracing pattern | Non scalloped X-type |
Body finish | Hand-rubbed |
Orientation | Right handed Neck |
Neck shape | Modern low oval/PA taper |
Nut width | 1.69" (43 mm) |
Fingerboard | FSC Certified Richlite |
Neck wood | Rust Birch Laminate |
Scale length | 23" |
Number of frets | 20 |
Neck finish | Hand-rubbed |
Pickup/preamp | Yes |
Configuration | Soundhole mounted preamp |
Headstock overlay | High pressure laminate rosewood pattern |
Tuning machines | Chrome Enclosed Gear |
Bridge | FSC Certified Richlite |
Number of strings | 6 |
Reviews:
I really liked this little guitar, BUT…I read the reviews and decided to buy in-store so I could play the guitar before buying, and I'm SO glad I did. I went into my local Guitar Center and played THREE of these Martin LX1E guitars, including one that had been specially unboxed so I could try it after two others failed my examination. All three guitars had a very pronounced buzz in the frets. It was not that noticeable when I played them acoustically, but the buzz was very noticeable when I plugged them in to an amp. I even tested the amp with other guitars, to make sure it wasn't the amp. It wasn't. Its a great little guitar, great tone and very playable, BUT my advice would be not to buy this one on-line. Play it first. Play up and down the whole fretboard, and plug it into an amplifier and play again. I have been playing for more than fifty years and have never experienced playing three brand new Martins that were simply not up to snuff. Weird!Tele Playr
The guitar itself can have five stars. Nothing wrong with it. The problem I have is that it is not the old LX1E lefty that Martin used to make and I used to own. It is advertised incorrectly here as containing the Fishman I-sys electronics that contained a volume, base/treble controls and a phasing button for feedback. It also no longer contains the tuner. This is basically the LX1 Little Martin with a Sonitone pickup under the bridge and tone/volume control in the sound hole, which I despise. I prefer the old version where the tuner and controls were on top side (as shown in the picture variety). This needs to be updated!!! I now have no tuner on this guitar when I fully expected one. I would recommend the Little Martin guitar but it needs to be advertised correctly.Jules
I bought this guitar for my son so he can have a smaller guitar to lug around in school. We were surprised when we received the product that the pickup that was installed is a Sonitone pickup instead of what's advertised – an Isys T preamp. The Isys preamp has a tuner, phase and tone control whereas the Sonitone is built into the sound hole and only has the volume and tone control. I brought this up with customer support saying I only wanted the product that I thought we were buying. I received excuses and a repeated offer to return the guitar. We chose to keep it because we need it and like the Martin sound. However MF does not stand up to what they advertise and could not provide a reasonable explanation why the product was switched. Even as I write this review, the description still says it has the Isys pickup. Good luck to future buyers and know that you are buying a different product.Pasigenyo
11. Martin D-10e Road Series – Natural Sitka Spruce

Product Details:
This martin road series d10e is in excellent condition. playability and action is as it should be. all solid wood construction with a spruce top and sapele back and sides with a richlite fingerboard. it comes with a computerized plek setup, fishman electronics and a natural satin finish. includes original soft shell case.
Specifications:
Finish | Natural |
Year | 2018 – 2019 |
Made In | Mexico |
Back Material | Sapele |
Body Shape | Dreadnought |
Finish Style | Satin |
Fretboard Material | Composite |
Number of Strings | 6-String |
On-board Electronics | Piezo Pickup |
Right / Left Handed | Right Handed |
Sides Material | Sapele |
Top Material | Spruce |
Wood Top Style | Plain |
Reviews:
I bought my fiancé and I a new Martin. I got her a Martin Dx2e and I got this one. I received mine first since I ordered from here which was wonderful. I got hers off of reverb because ams didn’t have sunburst which she wanted. I was not picky about color but I went with this one. I was super excited to say the least because this was my first Martin Guitar. I also purchased another guitar last year from Ams and I loved it. I digress and move forward to getting it. So I opened it up and I was super pleased with how perfect it looked. Then I started playing it. It was great until I went to play a D chord or anything that involved the high E string. It is cut way too low on the nut and the slightest pressure makes the string fall off the fret board. I thought maybe it was just me, however my father in law to be, which is a professional had the same issue. Also my fiancé had the same issue. Needless to say, I tried to make it work. I sent Ams an email. No response. I guess I’m stuck with this 1k dollars in a guitar that is going to need to be repaired at a shop when it’s brand new. So overall, if you want to take the risk, go for it. My fiancé got the Dx2e and it’s stellar. I would rather have one like hers than this one tuner or not. Hers sounds much better too. The looks and everything else is fine. Just the bottom string is way way too low.Brittany
Sound: Unplayable, neck is crap Features: Doesn’t matter what you do to adjust the neck , it is crap Ease of Use: I wouldn’t know , this guitar should never have been allowed to be released . The neck is unacceptable Quality: It looks pretty. If I wanted a pretty guitar to never be played then it would be ok . But you can not even play this $900 piece of crap. Extremely frustrating Value: Absolutely no. Buy another brand. Breedlove would be my best choice as I bought one and absolutely loved it out of the box . Best acoustic guitar I ever played Manufacturer Support: I have contacted Martin. No authorized repair shop within 100 miles of me in my state . Martin should be ashamed of this garbage The Wow Factor: Martin name sucked me in . Never ever again if they don’t want to fix this piece of junk Overall: I have been playing and working on my own guitars since 1975 . This is absolutely the worst guitar I’ve ever owned. The neck has an S shape to it . The relief is acceptable up to the 7th fret , after that it rapidly accelerates to an unusable 1/4 inch at the 12th fret . No matter how much you attempt to adjust it, it simply is unplayable. I am ashamed to even take it out of the bag . Martin quality control seriously blew it big time on this guitar. I own dozens of guitars and waited until my retirement to buy that Martin guitar of my dreams. This is a nightmare, not a dream. Stay away from this piece of crap . No matter what adjustment you do to the truss rod , it won’t help. Bass to treble side is extremely different. 1/4 inch on the bass side at the 12th but the treble side is marginally better. However, the S shape of the fretboard makes the guitar unplayable unless you like staying in the cowboy chord area . My Ovation, Breedlove,Fender , and Gibson acoustic guitars are brilliant examples of guitar playability. This Martin was to be my final guitar since I have only played them and never owned one . I can’t even play this piece of garbage. Martin has no dealer or authorized repair shop within 100 miles of me so I am stuck with a $900 piece of firewood. Never ever will I buy anything with that name again. That’s all they are, a name. How this got by quality control blows my mind. I have $200 acoustic guitars that are much better than this. Totally disgusted by my experience with this guitar.Gregory
Overall: So after playing guitar for more than 30yrs, this is my first Martin. Very weird considering my father sang and played with a Martin F-65 (rare semi-hollow body, only about 600 made) most of his life. I've lived all my life usually not more than 2 hours from the factory, and for most of that time less than an hour. I've taken the factory tour which was awesome. I've met many musicians that play Martins, endorse them, etc. I've been playing the last year or so on a Fender acoustic(not including my electrics that I own or play), which is a decent enough instrument, albeit a cheap sub 300$ guitar, when I purchased it over a year ago. I have owned a few other acoustics, a couple Takamines, Fenders, Ibanez, Ovations etc over the years. I won't say I have any considerable experience with 1k and up acoustic guitars, but I like to believe I have at least a decent ear. The sound is really the thing here, as this is not an ornate guitar with fancy inlays and stuff like that. Still, one of the main reasons I chose this model is because it's solid wood. I have no experience with Martins HPLs, but I also know Martin wouldn't put their name on anything if it isn't well made. I prefer solid wood, so that's a great reason to chose this model for this price point, and the reason I did. That being said, this is what a great guitar should sound like. I can easily hear the way every string sounds as clear and loud as the others. I'm pretty sure this has to do with bracing and the way they build their tops. it just projects the way a guitar should, not muddy on low strings and too bright on the highs. It sounds superb, plain and simple. Clear, bright, articulate. Martin has been perfecting guitar building for almost 2 centuries now, and while this is not their top of the line guitar, it gets all the benefit of their experience in the way they're designed and built. One thing I didn't realize about Martins until after getting this, and looking at their specs on most of their guitars is they have a wider neck (1.75" width) than I'm used to. My Fender neck was more like an electric neck, both width and thickness wise. I will easily get used to this though, and may enjoy it even more in time, as I have big hands. I also love the hidden controls for the volume and tone and tuner. I love that they didn't cut a huge hole in the body of the guitar for them, very cool. I haven't plugged it in yet, but I have no doubt it'll sound good. Fit and finish are fantastic, as is the soft case they include. I would rather it have had a gloss finish, except the neck, but that's just a personal thing. It's a beautiful, well made instrument, that you should definitely put on your short list of under 1k guitars.I would definitely recommend this guitar.
12. Martin D-X2e Koa Acoustic-Electric Guitar

Product Details:
Express yourself. and, take your music anywhere. the martin d-x2e koa w/ fishman mx combines renowned martin quality and a solid top with a smooth, comfortable feel, and responsive fishman electronics. so, whether you're ready to upgrade your instrument, planning your debut album launch, or simply crave a reliable, stage-ready electro acoustic for life on the road – martin's got you covered.smooth to the touch, and born to perform. this d-x2e koa features high-end details including performing artist playability. allowing you to run wild with your technique whilst reaping the benefit the d-x2e's immense comfort. it also features a solid top and koa-generated hpl body. resulting in an incredibly durable instrument with koa's head-turning aesthetic, and a sonic attitude that just keeps on giving. and, with a hpl body, this d-x2e is perfect for life on the road thank to its climate resilient attitude. plus, you can keep your d-x2e safe and sound from rain and potential scratches thanks to a quality martin gig-bag. spark your passion for performance and take your music to the next level with martin.
Specifications:
Construction | Mortise & Tenon Neck Joint |
Body Size | D-14 Fret |
Top Material | Sitka Spruce |
Rosette | MOP Pattern with Multi-Stripe |
Bracing Pattern | X Brace |
Brace Shape | Scalloped X with Non-Scalloped Tone Bars |
Brace Material | Sitka Spruce |
Brace Size | 5/16" with 1/4" Tone Bars |
Back Material | HPL |
Back Detail | Figured Koa Pattern |
Side Material | HPL |
Side Detail | Figured Koa Pattern |
Neck Material | Select Hardwood |
Neck Shape | Performing Artist |
Neck Taper | High Performance Taper |
Plek | Yes |
Nut Material | White Corian |
Headstock Shape | Solid with Standard Taper |
Headplate Material | HPL |
Headplate Detail | Do Not Use |
Headplate Logo Style | Script Ink |
Heelcap | Black |
Fingerboard Material | Katalox |
Scale Length | 25.4" |
Neck Joins Body At | 14th Fret |
Number of Frets Total | 20 |
Fingerboard Width at Nut | 1 3/4'' |
Fingerboard Width at 12th Fret | 2 1/8'' |
Fingerboard Inlay Material | Mother of Pearl Pattern |
Fingerboard Inlay Style | Style 28 |
Side Dots | White |
Finish Top | Hand Rubbed |
Top Color | Clear |
Finish Neck | Hand Rubbed |
Bridge Material | Katalox |
Bridge Style | Modern Belly – Drop in Saddle |
Bridge String Spacing | 2 5/32" |
Saddle | Compensated White Tusq |
Saddle Radius | 16" |
Tuning Machines | Chrome Enclosed Gear |
Knob | Small |
Bridge Pin Material | White Plastic |
Bridge Pin Dots | Black Plastic |
Pickguard | Faux Tortoise |
Electronics | Fishman MX |
Reviews:
Overall: Bought this guitar when it first came out. It's HPL so the finish doesn't really matter compared to other HPL back and sides but the neck feel and solid wood neck improves pliability from the previous earlier HPL models I have owned. From the first strum I knew I had a good one and I doubt you'll regret buying one of these. Big Martin sound for not a lot of money.Lewis
This guitar was in tune when it arrived, I highly recommend this to musicians who don't care about buying collectors art. My step-dad has over 30 k in 5 American Martin's. They are amazing, but i can take this work on the grip truck. The action is subperb.. buy this guitar, the help from ams was awesome go Glenn! This is probably best cheap quality acoustic electric for the 700 under marketConor
Excellent value guitar ideal for Open Mics.Reviewed by Andertons Music Co.
13. Martin D-X2e 12-String Acoustic-Electric Guitar

Product Details:
Martin took the d12x1ae and reimagined it. the result is the d-x2e 12 string. this dreadnought sized model has a sitka spruce top and figured mahogany pattern high-pressure laminate (hpl) back and sides. new mother-of-pearl pattern inlay on the rosette and fingerboard lend a richness to the d-x2e 12 string, making it as impressive to look at as it is to play. a low profile neck, fingerboard, and bridge, all made from select hardwood improve upon the sound transfer of this model. it is equipped with fishman mx electronics and strung with martin’s authentic acoustic lifespan 2.0 strings. with a new, soft gig bag featuring headstock, bridge, and endpin protectors, a durable water-repellent exterior, and foam padding, this model is ready to go anywhere.
Specifications:
Edition Size | Open |
Construction | Mortise & Tenon Neck Joint |
Body Size | D-14 Fret |
Top Material | Sitka Spruce |
Rosette | MOP Pattern with Multi-Stripe |
Bracing Pattern | X Brace |
Brace Shape | Scalloped |
Brace Material | Sitka Spruce |
Brace Size | 5/16" with 1/4" Tone Bars |
Back Material | HPL |
Back Detail | Figured Mahogany Pattern |
Side Material | HPL |
Side Detail | Figured Mahogany Pattern |
Neck Material | Select Hardwood |
Neck Shape | Low Profile |
Neck Taper | Standard Taper |
Plek | Yes |
Nut Material | White Corian |
Headstock Shape | Solid with 12 String Taper |
Headplate Material | HPL |
Headplate Logo Style | Script Ink |
Heelcap | Black |
Fingerboard Material | Select Hardwood |
Scale Length | 25.4" |
Neck Joins Body At | 14th Fret |
Number of Frets Total | 20 |
Fingerboard Width at Nut | 1 7/8'' |
Fingerboard Width at 12th Fret | 2 5/16'' |
Fingerboard Inlay Material | Mother of Pearl Pattern |
Fingerboard Inlay Style | Style 28 |
Side Dots | White |
Finish Top | Hand Rubbed |
Top Color | Clear |
Finish Neck | Hand Rubbed |
Bridge Material | Select Hardwood |
Bridge Style | Belly – 12 String |
Bridge String Spacing | 2 5/16'' |
Saddle | Compensated White Tusq |
Saddle Radius | 16" |
Tuning Machines | Chrome Enclosed Gear |
Knob | Small |
Bridge Pin Material | White Plastic |
Bridge Pin Dots | Black Plastic |
Pickguard | Tortoise Pattern |
Electronics | Fishman MX |
Manufacturer Part Number (MPN) | 11DX2E12STRING |
Reviews:
Sound: What more do you want at this price point with free shipping. Well built, sounds good.Fishman MX electronics, already installed heel joint strap button, Tusq saddle and nut and bridge pins. Overall: Nice guitar. I can easily tell the difference between this model which I just bought, here, from a USA made one: then again one could buy a few of these ones for the starting price of a new USA made Martin 12 string.Very nice gig bag. Well constructed. Fishman MX electronics with the batter door where it should be at the output jack plate.Plek'd at the Martin factory, but I am going to have my tech adjust the action, not bad just a little higher than I like.
First off ! I highly recommend this 12 string to everyone! i have now owned this guitar for almost a year now. Before I bought this Martin dx2e I shopped around and went to a bunch of different guitar stores to compare different brands and see the difference. I was after a really good full sound with no string noise , I definitely did not want a lament top and real wood sound that would appreciate more and more in time. I compared a taylor, and it was great but the price was a little crazy, for what was afforded I didn’t care what brand of guitar i was going to choose, all that mattered to me was the tone and feel , I tried a guild 12 string and again it was really nice as well but I found it had a lot of mid high tones . Again I was looking for a certain sound that would cater to my own sound, style and feel . After shopping around I chooses this Martin DX2e for its great natural sound and the feel , the price was definitely unbeatable and I still can’t believe how good this guitar sounds! Amazing guitar! The next big factor was now where to buy it , Sam ash? Guitar center ? I found American musical “AMS” was amazing to purchase this Martin from, it showed up in just 2/3 days protected and the customer service was unbelievable! I love this guitar and love AMS and again I highly recommend this guitar you will not be disappointed! Thank you AMS for making my decision easy and effortless !
I recently purchased my Martin DX2E 12 string from AMS and I love it. I purchased my Martin GCE16 about a year ago from AMS and I have never heard of them before this. I tried to order the same guitar from Guitar Center and it come in damaged, so I returned it. I then tried to order the same guitar from Musicians friend. The online site said it was in stock. I even paid for 2 day delivery, but it never showed up. After 2 weeks I called and they told me the guitar was out of stock. They also told me they should of called or emailed but they don't know why they didn't.(TERRIBLE CUSTOMER SERVICE FROM MUSICIANS FRIEND).This is when I found AMS. I called AMS and they were VERY helpful and easy to deal with. I ordered my VERY FIRST MARTIN GUITAR from AMS and have been very pleased. I have since ordered my second Martin guitar from AMS and will only use AMS for my online purchases from here on out. Thank You for all of the great service and merchandise.Bobby
14. Martin D-16e Mahogany Acoustic Electric Guitar – Natural

Product Details:
This 16 series dreadnought is crafted with satin-finished mahogany back and sides for a big sound with a punchy midrange and bright treble response. it includes a sitka spruce gloss top for balanced tone and projection and a high-performance neck taper for ease of playability up and down the fretboard. the d-16e comes equipped with fishman matrix vt enhance nt2 electronics. strung with martin authentic acoustic lifespan 2.0 light gauge strings.
Specifications:
Construction | Simple Dovetail Neck Joint |
Body Size | D-14 Fret (000 Depth) |
Top Material | Sitka Spruce |
Rosette | Multi-Stripe |
Bracing Pattern | Forward Shifted X Brace |
Brace Shape | Scalloped |
Brace Material | Sitka Spruce |
Brace Size | 5/16" |
Back Material | Mahogany |
Back Purfling/Strip | Style 18 |
Side Material | Mahogany |
Binding | Silver |
Top Inlay Material | Multi-Stripe |
Back Inlay Material | Black Stripe |
Neck Material | Select Hardwood |
Neck Shape | Modified Low Oval |
Neck Taper | High Performance Taper |
Plek | Yes |
Nut Material | Bone |
Headstock Shape | Solid with Square Taper |
Headplate Material | Ebony |
Headplate Logo Style | Script Old Style Overlay |
Heelcap | Silver |
Fingerboard Material | Ebony |
Scale Length | 25.4" |
Neck Joins Body At | 14th Fret |
Number of Frets Total | 20 |
Fingerboard Width at Nut | 2 1/8'' |
Fingerboard Width at 12th Fret | 2 1/8'' |
Fingerboard Inlay Material | Mother of Pearl |
Fingerboard Inlay Style | Diamonds and Squares Long Pattern |
Fingerboard Binding Material | Silver |
Side Dots | Black |
Back and Side Finish | Satin |
Back and Sides Color | Dark Mahogany |
Finish Top | Gloss |
Top Color | Dark Mahogany |
Finish Neck | Satin |
Neck Color | Dark Mahogany |
Bridge Material | Ebony |
Bridge Style | Modern Belly – Drop in Saddle |
Bridge String Spacing | 2 5/32" |
Saddle | Compensated White Tusq |
Saddle Radius | 16" |
Tuning Machines | Satin Pearl Open Gear |
Knob | Butterbean |
Bridge Pin Material | Black Tusq |
Bridge Pin Dots | Mother of Pearl |
Pickguard | Black |
Electronics | Fishman Matrix VT Enhance NT2 |
Reviews:
Overall: I've been playing guitar a long time, both electric and acoustic. This is my first Martin and first American made instrument. Bottom line – it's awesome, and the American quality is very apparent. I had a lower end acoustic which I actually loved, but was on the hunt for an acoustic-electric. After getting frustrated with lower priced overseas instruments, I finally said "that's it! I'm getting a Martin." I still didn't want to spend $2.5-$4k though, but wanted an American made Martin with included electronics. This one fit the bill.My one concern was whether this guitar would still sound good, loud, and have enough bass given the shallower depth. I actually had the opportunity to play the D-16E side-by-side with a "Martin Special 16 Style" (which is exclusive to a competitor store). That instrument is a full depth dreadnought but otherwise very similar. Without much scientific evidence, I would say the D-16E sounded better. It may have been a little quieter, but I felt it had a more balanced sound and less boom. 90% of the time, I play my guitar on recordings in multi-instrument arrangements and have to cut the low end anyway. Even still, played solo, it sounds amazing and I think it has plenty of volume and bass.I'm a perfectionist when it comes to intonation and setup. This thing was absolutely perfect out of the box. I checked intonation, action, string height at the nut, neck relief – I absolutely do not need to take it in for an initial setup. The frets are also nice and smooth at the edges of the fingerboard. I initially thought I didn't like the vintage style open gear tuners, but I actually love the way they operate – they are very smooth and accurate. And I think they look very classy too.As far as appearance I think it is absolutely beautiful. I love the simplicity of it. I like the satin finish on the back and sides and the gloss top. The top wood grain on mine looks great. Just enough pattern to add some character without a lot of bold striping. I chose the mahogany one for a few reasons – 1) it was a little cheaper, 2) I listened to some comparisons and although the mahogany vs. rosewood were very, very similar, I thought the mahogany sounded a little better, and 3) the mahogany I think is even simpler looking than the rosewood, which I like. The mahogany D-16 is more like a D-18, where the rosewood D-16 is more like a D-28. I thought the binding was black, but was pleasantly surprised to see it's actually a beautiful dark tortoise shell.The only thing I would be a little critical on for this guitar is the electronics. The single tone knob adjusts from flat EQ to "scooped" EQ. To me, both of these settings have too much mid and high end. I would like separate bass, mid (preferably sweepable), and treble controls. And the enhance does make it sound a bit more natural, but it really doesn't affect the sound that much. I think they should've gone simpler and just left off the tone knob and enhance knob. They could've preset some enhance from the soundboard pickup and then let the user EQ it to their liking with a DI or amp, since that needs to be done anyway. However, I think a lot of acoustic-electrics plugged in directly suffer from similar issues (except maybe for ones equipped with something like the L.R. Baggs Anthem). I did get a pretty good sound plugged in after adding some EQ in my DAW and a little reverb. Likewise, if I were to plug in for live performance, adding a DI box or an amp with EQ controls would help immensely.On the plus side for the electronics, I do like that the controls are somewhat hidden in the sound hole. I also like that the output jack is separate from the button. I had another acoustic-electric with the output jack in the strap button, and I needed a special adapter to get any of my several straps to hook onto it securely. And it's nice to have the battery accessible from outside the guitar. Systems like the L.R. Baggs Anthem require a battery bag velcroed inside the instrument which requires string removal (or extreme loosening) to change.Jason
I bought this beauty about a month ago at Sam Ash. I visited three or four times and spent several hours playing different acoustic electrics in their acoustic room before I decided on this guitar. Not only is it easy on the eyes, but it sounds so good especially amplified. It has a great tone and really nice low end. At first I had some buyers remorse, but now that I've played it through multiple amps and have used it to record, I'm confident I made the right choice.JW
Finally got a Martin made in Nazareth, PA. The reviews were right on down to the smell of wood the first time you opened the case. Sounds sweet unplugged. The feel of the neck and the action couldn't be better. Not as loud as a full bodied dreadnought as expected. When I plugged it in my Fishman Loud Box Artist, I was blown away. It made me hear what this amp was really made for. But here's the problem. After a few minutes of strumming the guitar and enjoying the sound, the 1E string rolled off the edge of the fret. I ignored it and kept playing because the sound was so good. But then it happened again in less than 20 minutes of playing. Both times happened on the third fret so I looked at it closely. I pressed the string and lightly pushed it down and it easily rolled off the edge. I've been a guitar player for well over 40 years and the last time I had this issue was with a guitar with a badly replaced frets & fretboard. I don't know if this is just a defect on this particular D-16e guitar or the design is just not right for me. Either way I'm not happy with it so I returned it. It used to be when people ask me about Martin guitars, I tell them if it's made in Nazareth, PA you can never go wrong. That's a myth to me now. It may be a one in a million thing, but if you're that guy in a million, it's a world view changing experience. What else do I believe in that's not really true?Roberto
15. Martin D-X2e Natural

Product Details:
Martin took the dx1ae and reimagined it. the result is the d-x2e mahogany. this dreadnought sized model has a sitka spruce top and figured mahogany pattern high-pressure laminate (hpl) back and sides. new mother-of-pearl pattern inlay on the rosette and fingerboard lend a richness to the d-x2e mahogany making it as impressive to look at as it is to play. with a performing artist neck, fingerboard, and bridge of select hardwood, the sound transfer of this model has been greatly improved. it is equipped with fishman mx electronics and strung with martin’s authentic acoustic lifespan 2.0 strings. with a new, soft gig bag featuring headstock, bridge, and endpin protectors, a durable water-repellent exterior, and foam padding, this model is ready to go anywhere. martin took the dx1ae and reimagined it. the result is the d-x2e mahogany. this dreadnought sized model has a sitka spruce top and figured mahogany pattern high-pressure laminate (hpl) back and sides.
Specifications:
Edition Size | Open |
Construction | Mortise & Tenon Neck Joint |
Body Size | D-14 Fret |
Top Material | Sitka Spruce |
Rosette | MOP Pattern with Multi-Stripe |
Bracing Pattern | X Brace |
Brace Shape | Scalloped |
Brace Material | Sitka Spruce |
Brace Size | 5/16" with 1/4" Tone Bars |
Back Material | HPL |
Back Detail | Figured Mahogany Pattern |
Side Material | HPL |
Side Detail | Figured Mahogany Pattern |
Neck Material | Select Hardwood |
Neck Shape | Performing Artist |
Neck Taper | High Performance Taper |
Plek | Yes |
Nut Material | White Corian |
Headstock Shape | Solid with Standard Taper |
Headplate Material | HPL |
Headplate Logo Style | Script Ink |
Heelcap | Black |
Fingerboard Material | Select Hardwood |
Scale Length | 25.4" |
Neck Joins Body At | 14th Fret |
Number of Frets Total | 20 |
Fingerboard Width at Nut | 1 3/4'' |
Fingerboard Width at 12th Fret | 2 1/8'' |
Fingerboard Inlay Material | Mother of Pearl Pattern |
Fingerboard Inlay Style | Style 28 |
Side Dots | White |
Finish Top | Hand Rubbed |
Top Color | Clear |
Finish Neck | Hand Rubbed |
Bridge Material | Select Hardwood |
Bridge Style | Modern Belly – Drop in Saddle |
Bridge String Spacing | 2 5/32" |
Saddle | Compensated White Tusq |
Saddle Radius | 16" |
Tuning Machines | Chrome Enclosed Gear |
Knob | Small |
Bridge Pin Material | White Plastic |
Bridge Pin Dots | Black Plastic |
Pickguard | Tortoise Pattern |
Electronics | Fishman MX |
Reviews:
Sounds and plays great for the price point. Highly recommend if you're looking for Martin quality but can't afford the next level up. Considered "better" models from other brands at similar price but happy I went with the Martin. The included gig bag is also great quality, better than what I've used previously that I had to pay separately for.CK
I have one of these but it is the Burst model which has Massacar design on the HPL back and sides , which I find to be very attractive. I had to of course, sand down the saddle and adjust the truss rod using the Martin truss wrench in order to have it to my personal settings. Once that was done, I found that this guitar is a joy to play. I only play at home, so I have never plugged it into a amp but I'm okay with that. The tone from this is 100% Martin and it stays in tune forever. I love it and it is not going anywhere.jeffreyo46
16. Martin Gpc-11e Road Series Acoustic-Electric Guitar

Product Details:
Excellent versatility. exquisite playability. the martin gpc-11e road series electro acoustic provides everything the modern performer wants in an electro acoustic guitar. you'll have a stunning tonal range at your fingertips. a sitka spruce top brings a broad dynamic range, while sapele used for the gpc-11e's back and sides can easily accommodate any genre. so you'll never be held back in what you can play.having one of these in your hands is a complete joy. its cutaway body shape provides uninhibited access to the very top of the guitar's scale. this means you can play freely at the high end without restriction. and its smooth playing hardwood neck brings a speedy playing action. combine all of this with high-performance fishman electronics that give you clarity in your live sound, and you've got a sensational all-round acoustic that gives you everything you need. and much more.
Specifications:
Construction | Mortise & Tenon Neck Joint |
Body Size | Grand Performance 14 Fret Cutaway |
Top Material | Sitka Spruce |
Rosette | MOP Pattern with Multi-Stripe |
Bracing Pattern | X Brace |
Brace Shape | Scalloped |
Brace Material | Sitka Spruce |
Brace Size | 5/16" with 1/4" Tone Bars |
Back Material | Sapele |
Side Material | Sapele |
Binding | Black |
Top Inlay Material | Multi-Stripe |
Neck Material | Select Hardwood |
Neck Shape | Performing Artist |
Neck Taper | High Performance Taper |
Plek | Yes |
Nut Material | White Corian |
Headstock Shape | Solid with Standard Taper |
Headplate Material | HPL |
Headplate Logo Style | Script Ink |
Heelcap | Black |
Fingerboard Material | FSCA Certified Richlite |
Scale Length | 25.4" |
Neck Joins Body At | 14th Fret |
Number of Frets Total | 20 |
Fingerboard Width at Nut | 1 3/4" |
Fingerboard Width at 12th Fret | 2 1/8" |
Fingerboard Inlay Material | MOP Pattern |
Fingerboard Inlay Style | MOP Pattern Dots- 28 Style Pattern |
Side Dots | White |
Back and Side Finish | Satin |
Back and Sides Color | Cherry |
Finish Top | Gloss |
Top Color | Clear |
Finish Neck | Hand Rubbed |
Bridge Material | FSCA Certified Richlite |
Bridge Style | Modern Belly – Drop in Saddle |
Bridge String Spacing | 2 5/32" |
Saddle | Compensated White Tusq |
Saddle Radius | 16" |
Tuning Machines | Chrome Enclosed Gear |
Recommended Strings | Lifespan 2.0 Auth Acoustic MA540 Phosphor Light |
Knob | Small |
Bridge Pin Material | White Plastic |
Bridge Pin Dots | Black Plastic |
Pickguard | Faux Tortoise |
Electronics | Fishman MX-T |
Manufacturer Part Number (MPN) | MAT GPC11E |
Reviews:
I really like the size and sound of the Grand Performance Martin guitars. The low end has enough "boom" and higher end "sparkles." The construction of this guitar with solid sapele back and sides and a solid spruce top helps to bring out the sounds I like so well in Martin guitars. I've played a DRS1, DRS2, an 000-10e, a GPC-13e and this GPC-11e, and they are all consistent and well built. I really like the new pickup systems that they've added to the new series in as much as it includes the lighted tuner inside the sound hole. The fingerboard is smooth and fast; I like the Richlite. Sapele is a lot like Mahogany, so this is a very fine combination of woods. The tuners hold it in tune just fine. The bag it comes with is nicer than I had expected, it gives good protection. Not like a real hard-sided case, but good. And it's lightweight but with a strong zipper. Good tone wood is getting harder to source for these guitar makers. I'm very happy I could find a gem like this one with these fine materials.Boomer
+ I have chosen this type of guitar for fingerstyle, but this is also an excellent guitar for playing, both as a mediator and for strumming. Comfortable space between strings. Comfortable shape. Great sound. It's a real allrounder. Very comfortable neck (I'm used to a fender player strat, which I also love). Tuning machines are stable. – It is difficult to play right out of the box – very high string action. Taking a barre at the first fret was not an easy task. Wore to the master for tuning. Corrected the neck nut – now playability is excellent. Not visible to the eyes, but master told about frets irregularities. It seems that sanding will be required to align, but I don’t hear any problems, so maybe a little later. + The soft case isn't what I bought for, but it's a cool thing. Strict and stylish. Already useful. Overall, I am satisfied and would recommend the guitar.
Overall: I have bought and played so many electric guitars over the years and never really looked into buying an acoustic guitar for myself. I have an old epiphone acoustic laying around that was given to me by a friend years ago, but I never bought a decent one to play for myself. So I went about on YouTube of course to look at some reviews. There’s a lot of acoustic guitars out there so it’s very hard to make a decision based on them alone. I really did want a Martin so I knew that much. and, at that time thought they were very expensive. that they were really expensive.Then I found a really nice review of this Martin guitar and a Taylor. To me the Martin blew it away, and that had me sold. The only thing that bothered me was that I couldn’t play the Martin because I don’t have any music stores close to me. So I just decided to buy this, and boy am I satisfied! I’ve had it for a week now and I just love it. The sound is BIG and it’s a very, very light acoustic guitar. The setup is great out of the box and I think it’s a great guitar for the money. I know that maybe there is a guitar out there that may sound better and might be cheaper, but I just don’t have the time to go that deep into researching the internet to find one. And I have played Martins before, so I trusted the name. If you are looking to buy an acoustic for anything you are doing, this is a great choice of guitar to get. I’m very happy with my purchase, and zZounds makes it very easy to pay, I may add. Don’t hesitate on this guitar. It plays great, sounds great and looks wonderful! I’m very happy with my purchase! Also, it sounds great plugged in and the tuner right below the high E string is very nice to have in there. You don’t even notice it’s there when you aren’t tuning the guitar. I put 4 stars for manufacturer support because I’ve never dealt with them. And hopefully never will.Billy
17. Martin D-X2e Burst Acoustic-Electric Guitar

Product Details:
The 6-string dx1ae macassar dreadnought acoustic-electric guitar features a dreadnought body designed to produce powerful, rich sound that is perfect for live performance and in the studio. pairing sitka spruce top with macassar-pattern hpl back sides, dreadnought has clear, balanced tone, all sustain dynamic range you have come expect from martin guitar. mortise tenon neck joint ensures solid construction of guitar, optimal resonant tone sustain. dressed an attractive sunburst hand-rubbed finish, headplate, chrome tuners, this has look highly collectible but goes price anyone can afford. embrace dream owning your very own at too good pass up. richlite forest-friendly material similar tonal characteristics ebony. it’s light, easy play, less effected by humidity changes environment. for playability, burst comes modified low oval neck, performing artist taper 1-3/4” nut width. profile string spacing make it players play up down fingerboard ease. this guitar comes compete fishman sonitone. sonitone soundhole-mounted preamp rotary controls volume tone. are mounted conveniently under soundhole. all do plug play. you’ll great acoustic sound, right out box.
Specifications:
Edition Size | Open |
Construction | Mortise & Tenon Neck Joint |
Body Size | D-14 Fret |
Top Material | Sitka Spruce |
Rosette | MOP Pattern with Multi-Stripe |
Bracing Pattern | X Brace |
Brace Shape | Scalloped |
Brace Material | Sitka Spruce |
Brace Size | 5/16" with 1/4" Tone Bars |
Back Material | HPL |
Back Detail | Macassar Pattern |
Side Material | HPL |
Side Detail | Macassar Pattern |
Neck Material | Select Hardwood |
Neck Shape | Performing Artist |
Neck Taper | High Performance Taper |
Plek | Yes |
Nut Material | White Corian |
Headstock Shape | Solid with Standard Taper |
Headplate Material | HPL |
Headplate Logo Style | Script Ink |
Heelcap | Black |
Fingerboard Material | Select Hardwood |
Scale Length | 25.4" |
Neck Joins Body At | 14th Fret |
Number of Frets Total | 20 |
Fingerboard Width at Nut | 1 3/4'' |
Fingerboard Width at 12th Fret | 2 1/8'' |
Fingerboard Inlay Material | Mother of Pearl Pattern |
Fingerboard Inlay Style | Style 28 |
Side Dots | White |
Finish Top | Satin |
Top Color | Sunburst 1 |
Finish Neck | Hand Rubbed |
Bridge Material | Select Hardwood |
Bridge Style | Modern Belly – Drop in Saddle |
Bridge String Spacing | 2 5/32" |
Saddle | Compensated White Tusq |
Saddle Radius | 16" |
Tuning Machines | Chrome Enclosed Gear |
Knob | Small |
Bridge Pin Material | White Plastic |
Bridge Pin Dots | Black Plastic |
Pickguard | Tortoise Pattern |
Electronics | Fishman MX |
Reviews:
Mine is suppose to be rosewood but looks like the Macassar. Top is the same. Took it out of the box, tuned it and took it to a gig. Frets were finished ends and tops. Saddle height not too high not too low. Just needed to tighten the truss rod a little bit. Gig bag/case is well padded. Nice dreadnaught sound acoustic and plugged in. Well worth the extra price from the entry level DX.James
I got this one in a trade just yesterday which involved my Martin OMCX1E, which I had only bought brand new, not even 2 months ago. The previous owner had bought it brand new a few months ago but didn't take a liking to it, because it was too big for him to play. At least that's what he told me. He much prefers Auditorium sized acoustics while myself at heart, am a dreadnought guy, so this trade benefitted us both. The guitar was in immaculate condition and was already set up, so the inly thing that I did was to slap on a new set of Martin 2.0 lifespan strings which made a difference. First of all, the tone on this one , easily blows away the OMCX1E and I just love the Burst finish along with Massascar design on the HPL back and sides, which IMO, make this beauty stand out. Plus it also came with the heavy duty, Martin gigbag which is a huge plus. This one is without a doubt, a keeper.Jeff O 36
18. Martin D-X1e Koa Acoustic-Electric Guitar

Product Details:
Express yourself. and, take your music anywhere. the martin d-x1e koa w / fishman mx combines the renowned martin quality with a price that hides the quality of the offer. so whether you're ready to upgrade your instrument, plan to launch your debut album, or just want reliable, stage-ready electroacoustics for life on the go, martin has it all in control.smooth to the touch, it was born to perform. this d-x1e koa features high-level details, including artist playability. allowing you to run freely with your technique while reaping the benefits of the immense comfort of the d-x1e. it also features a koa-generated hpl body. the result is an incredibly durable instrument with an aesthetic that makes the koa's head spin. play with a bold and bright tone, with a focused and bright attitude. and, thanks to a quality martin gig-bag, this eye-catching d-x1e can be kept safe from rain and potential scratches. take your music to the next level with martin.
Specifications:
Edition Size | Open |
Construction | Mortise & Tenon Neck Joint |
Body Size | D-14 Fret |
Top Material | HPL |
Top Detail | Figured Koa Pattern |
Rosette | Herringbone Ink |
Bracing Pattern | X Brace |
Brace Shape | Scalloped |
Brace Material | Sitka Spruce |
Brace Size | 5/16" |
Back Material | HPL |
Back Detail | Figured Koa Pattern |
Side Material | HPL |
Side Detail | Figured Koa Pattern |
Neck Material | Natural Birch Laminate |
Neck Shape | Performing Artist |
Neck Taper | High Performance Taper |
Plek | No |
Nut Material | White Corian |
Headstock Shape | Solid with Standard Taper |
Headplate Material | HPL |
Headplate Logo Style | Script Ink |
Heelcap | Black |
Fingerboard Material | FSC Certified Richlite |
Scale Length | 25.4" |
Neck Joins Body At | 14th Fret |
Number of Frets Total | 20 |
Fingerboard Width at Nut | 1 3/4'' |
Fingerboard Width at 12th Fret | 2 1/8'' |
Fingerboard Inlay Material | Mother of Pearl Pattern |
Fingerboard Inlay Style | Style 28 |
Side Dots | White |
Finish Neck | Hand Rubbed |
Bridge Material | FSC Certified Richlite |
Bridge Style | Modern Belly – Drop in Saddle |
Bridge String Spacing | 2 5/32" |
Saddle | Compensated White Tusq |
Saddle Radius | 16" |
Tuning Machines | Chrome Enclosed Gear |
Knob | Small |
Bridge Pin Material | White Plastic |
Bridge Pin Dots | Black Plastic |
Pickguard | Faux Tortoise |
Electronics | Fishman MX |
Reviews:
The sound is great, love the great feel, koa wood produces a bass like sound. Great axe
The most bang for your buck in an acoustic guitar, hands down!
19. Martin D-16e Rosewood Acoustic-Electric Guitar – Natural

Product Details:
This item was returned in great condition. it looks and plays like new, with only minor signs of use (slight scuffs, etc.). this martin special 16 style rosewood dreadnought acoustic-electric guitar is crafted with satin-finished east indian rosewood back and sides for resonant sound with deep bass and rich overtones. it includes a sitka spruce gloss top for balanced tone and projection, and a high-performance neck taper for ease of playability up and down the fretboard. the special 16 style rosewood comes equipped with fishman matrix vt enhance electronics. strung with authentic acoustic lifespan 2.0 light gauge strings. the martin special 16 style rosewood dreadnought acoustic-electric includes a gig bag.
Specifications:
Body Style | D-14 Fret |
Top Wood | Spruce |
Bracing Pattern | Forward Shifted X, Scalloped spruce, 5/16" |
Finish | Gloss top, satin back and sides |
Neck Shape | Modified Low Oval with High Performance taper |
Neck Material | Select hardwood |
Fingerboard Material | Ebony |
Scale Length | 25.4" |
Tuning Machines | Chrome Enclosed Gear |
Nut width | 1-3/4" |
Number of Frets | 20 |
Country of origin | United States |
Reviews:
There is truly nothing I can say negative about this guitar. Sounds great, looks great, feels great. I've owned and collected many guitars, some with a price point much more than this, and I am very please and surprised to say that this guitar is on par if not even slightly BETTER than some of the more expensive guitars I own! If you're thinking about getting this guitar, DO IT! You won't be disappointed! ….the only thing I would change about this product is that I wish it came with a hardshell case. I did end up ordering a Martin 345 Dreadnought Hardshell Guitar Case and it fits like a glove. The soft case it comes with is just ok.Vanessa
I bought this guitar a few weeks ago and I am in love. I was actually looking to buy a D-16 or a Gibson J-45 and found this hanging up on the wall in my store. Took this down and loved the sound as soon as I strummed it. It has that beautiful rosewood tone and the deep sound of a full size dreadnought. Since this guitar is exclusive to Guitar Center, and it's family brands it is not featured on the Martin website (i was skeptical about this at first). But I can personally say that it is just as good if not better than any of the standard Martins and the specs don't lie. Also it is manufactured in the U.S.A in Nazareth, PA. I highly recommend you try this guitar if you are able to.Michael
This is my 4th Martin Dreadnought. I have had a Custom D (Mu Friend Martin), a D-28, a D-16 Adirondack, and this one. They have all been great but there was always something missing. For example, the D-28 was a joy to play and sounded great but lacked deep end rumble and punch. (I have since come to appreciate that is part of the appeal to many, and a product mostly of the bracing). The D-16 Adirondack had plenty of low end rumble, and it was stunning to look at, but for some reason it seemed to lack mid-range punchiness, and the high notes were kind of meh. I gave my Custom D to my son to take to college and was without any Martin Dread. I was playing just a Gibson J-45 which is a dream to me, but it also lacks mid-range punchiness and I was convinced it would get lost in a bluegrass jam circle setting. Then I discovered this rosewood Martin, which to me looks like a D-28 but with HD-28 style bracing. I suspected that it would deliver the what was missing from all my other Martins, and it has totally confirmed by suspicions. It's a joy to play, and it is beautiful to look at. The rosewood is so dark and stunning that you don't even really notice that it has a Satin finish. It delivers the low end rumble, in a somewhat more refined way than the Adirondack. The mid-range and high notes are all stunning. There is a bell like quality to anything played on the b and high e strings. The fretwork is flawless. Every guitar I have ever owned has had a least one place on the fretboard that I haven't really liked. I can't find it on this guitar. It just seems like a really well conceived and executed guitar from Martin, and you can't beat the price.Penalty Box
20. Martin Road Series Sc-13e Special Natural

Product Details:
Specifications:
Reviews:
Related posts:
- Martin Road Series Acoustic Electric Guitar For Sale (Jan 2023 Update)
- Martin R 18 Archtop Guitar For Sale (Jan 2023 Update)
- Martin Guitar Repair Prices For Sale (Jan 2023 Update)
- Road Runner Roadster Electric E Guitar Gig Bag For Sale (Jan 2023 Update)
- Martin X Series Guitar For Sale (Jan 2023 Update)
- Martin Custom X Guitar For Sale (Jan 2023 Update)
- Road Runner Bass Guitar Case For Sale (Jan 2023 Update)
- Martin Custom X Series Acoustic Guitar For Sale (Jan 2023 Update)
- Martin Special X Series Rosewood Dreadnought Acoustic-Electric Guitar Rosewood For Sale (Jan 2023 Update)
- Rms Acoustic Guitar Amp For Sale (Jan 2023 Update)