Are you looking for the Left Handed Guitar Bridge? If so, you’ve come to the right place.
Choosing the Left Handed Guitar Bridge can be difficult as there are so many considerations, such as WD Music, Peavey, Seymour Duncan, Fender, Stewart-MacDonald, Gotoh, Warwick, Floyd Rose. We have done a lot of research to find the top 20 Left Handed Guitar Bridge available.
The average cost is $66.97. Sold comparable range in price from a low of $4.59 to a high of $198.00.
Based on the research we did, we think Fender Left-Handed American Vintage Strat Stratocaster Tremolo Bridge – Chrome is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Left Handed Guitar Bridge (20 Sellers)
| Product Image |
Product Name |
Features |
Check Price |
|
|
-
-
Reviewers Noted:
Well made . Attractive . Sound quality
|
-
- Model: 57/62 lh vintage strat
- Left-handed version
- Steel block
|
|
|
|
-
-
Reviewers Noted:
Craftsmanship
|
-
- Two-pivot synchronized bridge assembly with polished steel block-style saddles, offset intonation screws, steel tremolo block, and pop-in tremolo arm
- Modern-style narrow spacing
- For left-handed models
|
|
|
|
-
-
-
4.5
-
Reviewers Noted:
Well made . Visual appeal
|
-
- Steel bridge base & steel saddles.
- String spacing is ~11mm.
- Does not include mounting screws.
|
|
|
|
-
-
-
4.8
-
Reviewers Noted:
Attractive . Well made . Good sound quality . Durable . Ease of use
|
-
- Colour: chrome
- Made in: taiwan
- Handedness: left handed
|
|
|
|
-
-
-
4.7
-
Reviewers Noted:
Craftsmanship
|
-
- Kluson left hand vintage steel block tremolo bridge this is a beautiful replica of the traditional vintage tremolo. it features vintage 11.3mm spacing, kluson embossed stamped steel saddles, and a…
|
|
|
|
|
-
- With solid metal full size block… not zinc!
- With solid metal bridge saddles, black springs.
|
|
|
|
|
-
- Color: silver.
- Size: 8.4 x 4.1 x 1.4 cm.
- Material: metal.
|
|
|
|
|
-
- Left-handed double locking tremolo system bridge for ibanez and other guitars…
|
|
|
|
|
-
- Left handed.
- This is a set of six saddles with left-offset intonation screws.
- Please measure the saddles on your bridge to confirm that this product is a suitable replacement saddle for your guitar.
|
|
|
|
-
-
-
5.0
-
Reviewers Noted:
Visual appeal
|
-
- Left hand nickel finish 3-saddle bridge for tele. vintage "tray" style bridge features brass compensated saddles for easier intonation, and slotted saddle adjustment screws. 2-1/8"(54mm) string spacing. includes mounting screws.part#…
|
|
|
|
-
-
-
5.0
-
Reviewers Noted:
Craftsmanship
|
-
- Kluson usa replacement left hand zinc nashville tune-o-matic bridge with brass saddles kluson usa zinc bridge with brass saddles. 2mm allen wrench adjustment for intonation and height. this is an…
|
|
|
|
|
-
- Chrome left handed guitar bridge tremolo system for st stratocaster – they are all metal with a gorgeous finish. – replace your worn out parts, great design and extremely durable….
|
|
|
|
|
-
- New genuine aged/relic fender body hardware set with 6-saddle vintage stratocaster 2 1/16" tremolo assembly for lefty guitar. set includes: genuine fender lefty tremolo (part #007-1016-000) (2 1/16" mount spacing,…
|
|
|
|
|
-
- Electric guitar tremolo bridge set for st sq guitars left handed…
|
|
|
|
|
-
- Product description it's made of quality metal material with finish,sturdy,anti-rust and durable fit for stratocaster or squier style electric guitar(for left hand) includes block,claw,springs and mounting hardware.easy to install great…
|
|
|
|
|
-
- Product description a set left handed 6 string flat saddle single tremolo bridge system for electric guitar – screw-in arm / chrome – black for choose this is a brand…
|
|
|
|
|
-
- String to string spacing: 10.8mm
- Overall string spacing: 2 1/8 in. (54mm)
|
|
|
|
|
-
- Fits prs ce, se & s2 vibrato bridges.
- Mannmade usa #2030 modernvibrato bridge.
- Brass block #2053.
|
|
|
|
|
-
- Kluson left hand vintage steel block tremolo bridge this is a beautiful replica of the traditional vintage tremolo. it features vintage 11.3mm spacing, kluson embossed stamped steel saddles, and a…
|
|
|
|
|
-
- Part number 107296:003
- Please feel free to email us with any questions
|
|
Reviewers Noted:
Well made . Attractive . Sound quality
Features:
- Model: 57/62 lh vintage strat
- Left-handed version
- Steel block
Reviewers Noted:
Craftsmanship
Features:
- Two-pivot synchronized bridge assembly with polished steel block-style saddles, offset intonation screws, steel tremolo block, and pop-in tremolo arm
- Modern-style narrow spacing
- For left-handed models
Reviewers Noted:
Well made . Visual appeal
Features:
- Steel bridge base & steel saddles.
- String spacing is ~11mm.
- Does not include mounting screws.
Reviewers Noted:
Attractive . Well made . Good sound quality . Durable . Ease of use
Features:
- Colour: chrome
- Made in: taiwan
- Handedness: left handed
Reviewers Noted:
Craftsmanship
Features:
- Kluson left hand vintage steel block tremolo bridge this is a beautiful replica of the traditional vintage tremolo. it features vintage 11.3mm spacing, kluson embossed stamped steel saddles, and a…
Features:
- With solid metal full size block… not zinc!
- With solid metal bridge saddles, black springs.
Features:
- Color: silver.
- Size: 8.4 x 4.1 x 1.4 cm.
- Material: metal.
Features:
- Left-handed double locking tremolo system bridge for ibanez and other guitars…
Features:
- Left handed.
- This is a set of six saddles with left-offset intonation screws.
- Please measure the saddles on your bridge to confirm that this product is a suitable replacement saddle for your guitar.
Reviewers Noted:
Visual appeal
Features:
- Left hand nickel finish 3-saddle bridge for tele. vintage "tray" style bridge features brass compensated saddles for easier intonation, and slotted saddle adjustment screws. 2-1/8"(54mm) string spacing. includes mounting screws.part#…
Reviewers Noted:
Craftsmanship
Features:
- Kluson usa replacement left hand zinc nashville tune-o-matic bridge with brass saddles kluson usa zinc bridge with brass saddles. 2mm allen wrench adjustment for intonation and height. this is an…
Features:
- Chrome left handed guitar bridge tremolo system for st stratocaster – they are all metal with a gorgeous finish. – replace your worn out parts, great design and extremely durable….
Features:
- New genuine aged/relic fender body hardware set with 6-saddle vintage stratocaster 2 1/16" tremolo assembly for lefty guitar. set includes: genuine fender lefty tremolo (part #007-1016-000) (2 1/16" mount spacing,…
Features:
- Electric guitar tremolo bridge set for st sq guitars left handed…
Features:
- Product description it's made of quality metal material with finish,sturdy,anti-rust and durable fit for stratocaster or squier style electric guitar(for left hand) includes block,claw,springs and mounting hardware.easy to install great…
Features:
- Product description a set left handed 6 string flat saddle single tremolo bridge system for electric guitar – screw-in arm / chrome – black for choose this is a brand…
Features:
- String to string spacing: 10.8mm
- Overall string spacing: 2 1/8 in. (54mm)
Features:
- Fits prs ce, se & s2 vibrato bridges.
- Mannmade usa #2030 modernvibrato bridge.
- Brass block #2053.
Features:
- Kluson left hand vintage steel block tremolo bridge this is a beautiful replica of the traditional vintage tremolo. it features vintage 11.3mm spacing, kluson embossed stamped steel saddles, and a…
Features:
- Part number 107296:003
- Please feel free to email us with any questions
1. Fender Left-Handed American Vintage Strat Stratocaster Tremolo Bridge – Chrome
Product Details:
Complete kit has all of the vintage appointments for great tone and the correct look. features "fender" stamped saddles, hardened steel trem block, string tree, and tremolo arm with white tip. vintage/usa spec string spacing. original 6-point attachment with outside holes 2-1/4" on center. all mounting hardware is included.
Specifications:
| Product Dimensions |
11.42 x 7.48 x 3.54 inches |
| Country of Origin |
USA |
| Is Discontinued By Manufacturer |
No |
| Color Name |
Chrome |
Reviews:
I was looking for a good tremolo bridge for a Stratocaster build. The Fender Deluxe Series 2-point tremolo bridge is just what I needed. After a good setup and adding locking tuners, I have the Stratocaster of my dreams. It stays in tune really well.slimkennydee_123
Perfect item!! Came with "PAT PEND." saddles, made in USA. Best variation of the Fender vintage tremolo. Good price and very high quality.vicmil89
The relic itself is really just a ton of scratches all over the pieces in an unnatural way. I wanted to make a quality look so I spent extra to get this relic expecting top quality for the price. I was disappointed in how light the muriatic acid relic was. Some parts are nice like the tuners and the saddles. But the bridge body, neck plate, and jack plate just look scratched which left it looking really unbalanced. The tremolo bar doesnt even line up in its hole and wont screw in. I was definitely hoping for better quality for how much I paid. I would recommend doing it yourself with help from YouTube. Im sure it would be better, cheaper, and more controllable.visserluke
2. Fender American Deluxe Stratocaster Bridge Assembly &86-Present Left-Handed
Product Details:
This is a left handed fender american deluxe 2 point tremolo assembly in excellent condition for a fender ultra or deluxe stratocaster 1986 and up. it is made of polished steel and comes with all parts as shown. the tremolo arm snaps into place instead of screwing in. comes with tremolo springs, claw and screws, and mounting hardware. hardly used.
Reviews:
well made as u would expect from fender.mick8238
#1 is the positive fitting bar instead of the screw in arm that's never where you need it. For a non locking system it's hard to beat.llar-c-l3nr6bmlk8
This is the fourth tremolo unit installed on Partscaster guitarsthey all work as designedpicknstrum
3. Fender 6-Saddle Hardtail Classic/standard Series Bridge Assembly (Chrome)
Product Details:
Fender classic series vintage style "hardtail" stratocaster bridge. chrome finish with "fender" stamped saddles. fits string through applications with 2-3/16" string spacing includes mounting screws.
Specifications:
| Product Dimensions |
11.42 x 7.48 x 3.54 inches |
| Country of Origin |
Taiwan |
| Is Discontinued By Manufacturer |
No |
| Color Name |
Chrome |
Reviews:
This should have been the standard bridge on the Thinline Cabronita Telecaster, since it matches up with the pickup pole spacings much better than what comes on the guitar. The three mounting holes aren't an exact match, but install the middle screw first and then go into the outside two holes at a slight angle and it will work fine. Also keeps the two E strings farther in from the edges of the fretboard.duhvoodooman
Solid, well built. Just make sure you know this does not fit a vintage style 2 3/16 hardtail guitar. The string hole spacing on both the mounting screws and string holes are not the same. It can be made to work if you are ok with it not being perfect. Otherwise it is a great bridge. I prefer the vintage style stamped saddle hardtail bridges because they are 1/3 the cost.mathewsguitarworks
Good original Fender tele bridge. Bought it to use the saddles on a Squier Bullet Mustangdeburger-0
4. Fender Vintage-Style Standard Series Stratocaster Left Handed Tremolo Assembly
Product Details:
Made for fender instruments in a variety of vintage-style and contemporary models. nickel-plated steel vintage-style bridge assembly with six bent "fender" stamped saddles. assembly includes saddles, intonation screws/springs, and saddle height adjustment screws. tremolo block will accept standard 10/32 thread tremolo arm. does not include mounting hardware, tremolo claw, tremolo springs or tremolo arm. left-handed model. assembly features 2-1/16" bridge mounting spacing. as a result, bridge mounting screws will not directly fit onto a vintage or vintage reissue instrument and modification will be required. used on most standard series, deluxe roadhouse/lonestar, and blacktop series stratocaster models (mexico) manufactured '06-present.
Specifications:
| String Spacing |
52.4 mm (2.06") |
| Screw Mount Spacing (between outer screws) |
52.4 mm (2.06") |
| Block Depth |
42 mm (1.65") |
Reviews:
First of all – to prevent any misunderstanding about spec's – this Fender part no. 0071014049. Would be fine if musicstore could show this number also in part description. The bridge fits perfectly into a Squier 60's vibe (not the Bullit nor the Affinity!) as it is currently available in the store here – unless you do not like chrome on that guitar…. The massive trem block gives really more sustain. So if you like to keep the nickel finish from the 60's vibe Squier, just change the trem block from the bridge and you're done. Fits to the E-e string and mounting hole spacing of 2 1/16 inch (~52.3mm) This not really vintage style – only for the string riders, not for the spacings. (The vintage spacing is 2 7/32 inch which is more near to 54mm). Tremolo arm from the Squier block will NOT fit into this bridge! And it will not get loose with one of those necessary tension springs. Price/value is unbeatable.
I bought this for a partscaster project I was working on since I had read that it will bolt directly to a Squier SE Special body. I am here to verify that it bolts onto the Squier SE body without issue but cannot say whether it fits other Squier models (although I did read that it is too deep to work on the thinner Squier "Affinity" model bodies). I like the stamped saddles and the high mass block compared to the Squier unit. Side Notes: The string and mounting bolt spacing is not the same as the "vintage" Fender models (i.e.: it would not work on my MIM Fender Road Worn 50's Strat for instance). You will also need a Standard Mexican Fender tremolo bar (PN 099-2310-100), since the import one has different threads. Also, the Fender Mexican spring claw is wider than the one mounted to the Squier SE, so I just kept the original SE one in place, which works fine. Anyway, if you want an inexpensive upgrade for your lower end import Strat, I can attest to the quality of the Fender Mexican Tremolo bridge assembly… Good Luck!danzprod
I purchased this to better my sustain and after installation. The sustain was lasting to long almost five seconds, very hard to intonate. I new something was wrong. I checked the cavity and found one corner touching and after removal l was able to clear that up. Now it's as it was meant to be. Great tone increase and actually added to my playing comfort. I have the claw spring adjusted one half inch out and even making my trem exactly at 1/8 above the guitar surface. It's how l have always setup my strats and all my bends are more comfortable than with the old block. My sustain is around three seconds now and allows my compressor sustainer pedal to work properly. It's a vast improvement to tone. I can actually use 1 through 5 and all sound great no more over the edge quack and the other end not as dark. Definitely recommend, just check before you button it up that the block isn't touching the body or your notes will wring out on top of one another and most compressor s can't keep up to fix it. Custom shop neck American vintage Clapton fender noisless and believe it or not l replaced my worn out body with a new squire standard same neck pocket size just basswood it's awesome body $60 and of course the block had to go. If you upgrade your body measure the back of the neck pocket thickness and make sure it matches and dump the block and go fender big. Thanksatexx
5. Kluson Left Hand Vintage Steel Block Tremolo Bridge Chrome With Nickel Saddles
Product Details:
Kluson left hand vintage steel block tremolo bridge this is a beautiful replica of the traditional vintage tremolo. it features vintage 11.3mm spacing, kluson embossed stamped steel saddles, and a machined solid steel sustain block. comes complete with arm, screws, claw and springs. this is a direct replacement for fender part # 099-2049-002 in different plating/finishes.s
Reviews:
Great update to a Fender American Standard Tremolo at a reasonable price. Easy drop-in installation. I intend on buying more of them as soon as they're in stock.. I'd suggest using locking machine heads for aggressive tremolo use but for my purposes the unit is perfect.gregzy
Great quality bridge, better than Fender, I just wish it came with a mounting template to position the tremolo posts. If it came with a template I would give it a 5hausfly2
6. Fender Vintage Tremolo Bridge Assembly, Left-Handed, Gold
Product Details:
Big block. made in the usa. vintage "wide" 2 7/32nd`s string spacing.this bridge is compatible with any strat body that has predrilled mounting holes with a measurement from e center to e center of 2 7/32nd`s or any new non pre-drilled strat tremolo guitar body project.
Reviews:
A solidly built tremelo that has some weight behind it. If you're looking for a lefty trem or any trem for that matter go with a genuine Fender. You get what you pay for, so don't skimp on the quality.buymesomething1234
7. Nicexmas Ga205 Left Handed 6 String Flat St Saddle Single Tremolo Bridge System For Electric Guitar Accessories Parts Screw-In Arm (Silver), Size:
Product Details:
Description are you looking for a professional, yet affordable guitar bridge? are you in search of a sturdy, trustworthy tool that can do multiple jobs at once? if yes, look no further! our professional guitar bridge must meet you needs. it is one of the best choices for you. features –
Specifications:
| Assembled Product Weight |
0.7 lb |
| Assembled Product Dimensions (L x W x H) |
3.31 x 1.61 x 0.55 Inches |
8. Left-Handed Double Locking Tremolo System Bridge For Ibanez And Other Guitars
Product Details:
Left-handed double locking tremolo system bridge for ibanez and other guitars
9. Graph Tech Pn-8001-L0 Ghost Loaded 2-1/16" Offset Strat / Tele-Style Saddles With Piezo Pickups – 6-String Left-Handed
Product Details:
Graph tech ghost loaded string saddles strat & tele offset – left handed fits american-made fender strats plus, ultra, and american standard strat; left-handed guitars with left-offset intonation screws. they typically have narrow, 2-1/16" e-e string spacing. this is a set of six saddles with left-offset intonation screws. please measure the saddles on your bridge to confirm that this product is a suitable replacement saddle for your guitar. the most crucial measurement for most ghost saddles is often the e-e spacing — the distance between your high-e and low-e strings, measured at the saddles. other dimensions may be approximate because the saddles have height-adjustment and intonation-adjustment screws. use this nut and saddle sizing guide (pdf) to determine correct sizing. print it out at 100% and the illustrations are actual size. measurements thickness length height e to e approx. in. 13/32" 13/16" 7/32" 2 1/16 inches 0.41 0.815 0.23 2.076 millimeters 10.41 20.7 5.84 52.73
Specifications:
| Measure |
Length |
| inches |
0.815" |
10. Tb-5125-L01 Lefty Nickel Vintage Compensated Saddle Bridge For Telecaster
Product Details:
Left hand nickel finish 3-saddle bridge for tele. vintage "tray" style bridge features brass compensated saddles for easier intonation, and slotted saddle adjustment screws. 2-1/8"(54mm) string spacing. includes mounting screws.part# tb-5125-l01
Specifications:
| Finish |
Nickel |
| Made In |
Korea, Republic of |
Reviews:
It's an All Parts bridge… that says it all… top qualitygrscustom
The quality of this bridge is better than a stock Fender part. Its heavier, the edges are finished better, and the nickel plating looks better than stock. It also has holes in the back so it can be used as a top-loader or through-the-body. Costs a little more, but worth the extra money.bmoflaz311
11. Kluson Usa Replacement Left Hand Zinc Nashville Tune-O-Matic Bridge With Brass Saddles Chrome
Product Details:
Kluson usa replacement left hand zinc nashville tune-o-matic bridge with brass saddles kluson usa zinc bridge with brass saddles. 2mm allen wrench adjustment for intonation and height. this is an awesome oem bridge for builders or the diy repairman and offers a longer adjustment area than the original abr-1 bridge. it matches gibson specifications and is a drop-in, non-modification required replacement part.s
Reviews:
Item arrived as described in a timely manner.schuller180
Best value on eBay, Kluson tune-o-matic bridge worked flawlessly on my Gibson USA standard Les Paul, if you're looking to save a little bit of money and use a USA product, this is it, do yourself a favor and buy from this seller, fast shipping, awesome product!badbillyb2008
I have not installed it yet but it appears to be a nice piece of hardwaremanri_2141
12. Chrome Left Handed Guitar Bridge Tremolo System For St Stratocaster
Product Details:
Chrome left handed guitar bridge tremolo system for st stratocaster – they are all metal with a gorgeous finish. – replace your worn out parts, great design and extremely durable. – string spacing: 10.5mm package includes: 1 x bridge 1 x whammy bar 1 x wrench 1 x claw 3 x springs 8 x screws
13. Fender 007-1016-000 Standard Stratocaster Vintage-Style Left-Handed Bridge Assembly
Product Details:
New genuine aged/relic fender body hardware set with 6-saddle vintage stratocaster 2 1/16" tremolo assembly for lefty guitar. set includes: genuine fender lefty tremolo (part #007-1016-000) (2 1/16" mount spacing, 2 1/16" string spacing) w/ "fender" stamped saddles, mounting screws (x6), tremolo claw, mounting screws (x2), springs (x3), bar w/ tip, neck plate w/ mounting screws (x4), jack plate w/ mounting screws (x2), strap buttons (x2), pickup height screws (x6), switch screws (x2), pickguard screws (x11), and backplate screws (x6). a complete body hardware set for your lefty strat project. need a variation of this hardware set you don't see available, or need it reliced? contact me to see if i can put one together that fits your needs. please note that each set is made to order and that each set takes to the relicing process a bit differently. images are a common representation of our work, but some variance from piece to piece is expected. …
14. Electric Guitar Tremolo Bridge Set For St Sq Guitars Left Handed
Product Details:
Electric guitar tremolo bridge set for st sq guitars left handed
15. Left Handed Guitar Single Tremolo System Bridge For St Guitar
Product Details:
Product description it's made of quality metal material with finish,sturdy,anti-rust and durable fit for stratocaster or squier style electric guitar(for left hand) includes block,claw,springs and mounting hardware.easy to install great replacement for old or broken tremolo bridge string spacing:52mm specifications: color:chrome/silver material:metal string spacing:approx 10.5mm package included: 1 x tremolo bridge 1 x body mount claw 3 x springs 6 x mount screws 2 x claw screws 1 x tremolo bar 1x wrench no packing box. packed safely in bubble bag. shipping & handling we guarantee to ship out within 48 hours after payment confirmation (except holiday). we usually use the speedpak standard to send to you, it takes 14-20 working days on average to delivery items to buyer. secondly, we use speedpak economy to send to you, and it takes 18-25 working days on average to deliver the goods to the buyer. we are unable to control the delvery time because it is processed by third-party service, but it the parcel has
16. 6 String Electric Guitar Left Handed Flat Saddle Single Tremolo Bridge
Product Details:
Product description a set left handed 6 string flat saddle single tremolo bridge system for electric guitar – screw-in arm / chrome – black for choose this is a brand new replacement tremolo bridge for guitar with a tremolo bridge. these are all metal with a gorgeous finish. excellent value accessories. 100% new high quality and testing is fine item 100% like the picture shown string spacing: approx 10.5mm. color:black material: metal weight: 310g/set package included: 1 x bridge 1 x body mount claw 3 x springs 6 x mount screws 2 x claw screws 1 x tremolo bar 1x wrench no packing box. packed safely in bubble bag. please contact me if you need other pictures of this item. shipping & handling we guarantee to ship out within 48 hours after payment confirmation (except holiday). we usually use the speedpak standard to send to you, it takes 14-20 working days on average to delivery items to buyer. secondly, we use speedpak economy to send to you, and it takes 18-25 working days on average to deliver the goods
17. Kluson Left Hand Vintage Replacement Bridge For Fender Telecaster Steel With Brass Saddles – Gloss Nickel
Product Details:
This superior quality bridge includes a stamped steel baseplate with brass saddles. left handed. these bridges also share the original string thru and mounting screw locations for the fender vintage telecaster, broadcaster and no caster made in the usa through the 1950's thru to current production that uses vintage specs. these bridges will not fit fender american standard guitars which use the block saddles and mount with three screws.
Specifications:
| String to string spacing |
10.8mm |
| Overall string spacing |
2 1/8 in. (54mm) |
18. Mannmade Usa Upgrade Kit Prs Ce Se S Bridges Black Nickel Left Hand Black Nickel
Product Details:
Fits prs ce / s2 / se bridges – fatten the mid range tone and sustain! replaces stock ce, se & s2 bridge components, no modification required. fits prs ce, se & s2 vibrato bridges mannmade usa #2030 modern – vibrato bridge. includes: brass block #2053 comes complete with 3 stainless steel screws & pre-sized arm bushing. plated brass saddle set (6) #4001 plated steel mounting screw set (6) #4009 vibrato bridge spring set (4) #4007 ce / se / s2 bridge top plate, arm not included. – mfg in the usa by mannmade usamann – made usa # 2059-b-l
Specifications:
| Watchers |
1 |
| Finish |
Black Nickel |
| Made In |
United States |
19. Kluson Left Hand Vintage Steel Block Tremolo Bridge Nickel
Product Details:
Kluson left hand vintage steel block tremolo bridge this is a beautiful replica of the traditional vintage tremolo. it features vintage 11.3mm spacing, kluson embossed stamped steel saddles, and a machined solid steel sustain block. comes complete with arm, screws, claw and springs. this is a direct replacement for fender part # 099-2049-002 in different plating/finishes.s
Specifications:
| Watchers |
5 |
| Offers |
1 |
| Finish |
Nickel |
20. Prs Two-Piece Bridge With Studs & Thumbwheels Gold
Product Details:
Replacement bridge for core and s2 series mccarty 594 model guitars. includes bridge, studs & thumbwheels come in unpolished brass only. (tail piece with studs sold separately).
Specifications:
| Finish |
Gold |
| Year |
2010s |
| Made In |
United States |
