Gunstock Oil Guitar Neck For Sale (2024 Update)

Lin-speed gunstock oil lin-speed is an extreme grain revealing finish oil for gunstocks and any fine woodwork, like furniture, guitars, wood knife handles, pens, bar tops, and much more. lin-speed deeply penetrates wood pores and hardens, protecting the wood and revealing the beauty of grain patterns from within. in bright light wood appears to glow and you will have a sense that you can actually see into the wood. the finish is tough and abrasions disappear with just a dab of lin-speed. lin-speed is simple to use and is typically applied with the finger tips but for larger projects a sponge brush can be used. only a tiny bit is needed per application for a no build finish like no other. the convenient 2 ounce jar is typically enough for about 2 guitars. lin-speed is not like varnish or polyurethane as these types of finish are meant to be built up on the surface of the wood, where lin-speed works within the wood with virtually none on the surface. lin-speed makes wood grain glow, enhancing the beauty of your cherished guitars. lin-speed is the chosen finish of master luthier carl thompson of ctbasses.com. carl has been making bass guitars for some of the biggest names in music since 1974.

1. this guitar neck is compatible for fender st-style electric guitar neck replacement. 2. high-quality maple neck, delicate and unique. 3. fingerboard with 22 frets, smooth and high density. 4. adjustable truss rod has been installed at the headstock. 5. the hole for the tuning machine is 10mm in diameter. p descriptions: br / frets: 22 frets br / neck: canadian maple neck br / fingerboard: rosewood br / nut: 42mm nut br / back midline: rosewood br / color: matte yellow br / peg holes diameter: 10 mm / 0.4 inch br / neck length: 665mm / 26.18 in br / heel width: 56mm/2.2in br / heel depth: 20mm-26mm(with fingerboard) br / neck weight: 590g/20.8oz – package included: br / 1*guitar neck /p

1 pcs stock special shape maple guitarra neck unfinished no varnished rosewood fretboard electric

Thin oil based finish application for freestone guitar and bass necks in this process we apply 2-3 coats of a high quality natural oil-wax based finish. this durable water repellant coating is a sufficient finish for all wood types. the end result of this process is a smooth satin feel similar to but thinner than gunstock-oil. this process does not include grain filling so porous woods such as the sapele in the example photo will have an "open grain" finish. fretboard treatment: -we apply a hydrating oil to exotic wood fretboards. -we apply the high quality natural oil-wax based finish to maple fretboards. please note: this service is meant to be purchased along with a guitar or bass neck. please include the order number for the neck that you purchased and would like to have finished. this process may add a week to your order depending on our workload.

Mahogany wood lp guitar neck for setin body rosewood fretboard with mop inlay right hand 6 strings

The bottom width is about 55.5-56.5mm. the nut width is about 42mm. tuner hole 10mm. the truss rods are working properly. matte finish. nice neck. i'm sure you'll like it. it's on sale now, thank you! this batch of neck is too beautiful, the price is according to the wholesale price.

Maple wood 24 frets guitar neck and rosewood fretboard fingerboard

Hello all! this is a one-of-a-kind guitar neck. inspired by music man's silhouette bass guitar, it's a custom 30" scale. as a fretless neck it was crafted by usa custom guitars in 2015. the fretting job was done to my specs by my luthier (as was the headstock conversion to 4+2. this makes it also easier for the guitar to fit in standard cases). – roasted flame maple neck and fingerboard – 10" radius – 22 stainless steel jumbo frets – i think they're jescar – compensated bone nut (for a wound 3rd string, but could work also with plain string, though on this particular string it would response like a stadard nut) – tele specs heel – thin tung oil finish on the back of the neck, thicker on the headstock. – schaller locking tuners all this means that: you can add the neck to any standard tele neck pocket -and it will make a nice tight fit- but you will have to move back the bridge by appox. 1.262" or 32mm (and the bridge pickup at least, according to your liking).*if you ne…

Big headstock guitar neck 24 frets maple rosewood fingerboard st style guitar locking nut. *neck material: maple neck *fingerboard: rosewood *frets:24, medium frets *width at nut: 42mm *fingerboard inlay: dot inlay *tuner holes:10mm *heel width: 55.5mm -56.5mm *scale length:648mm(25-1/2") *adjustment: headstock adjustment, double adjusted *finish: gloss finished

Custom order st guitar neck start model maple with maple 21 frets black headstock replacement diy

The original aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. it is designed to be an aftermarket fit with most stratocasters, telecasters, and jazzmasters. it comes with everything you need to replace your current neck with one from rgi. this neck is built and ready to ship! neck specs: material: 6061 solid billet aluminum scale: 25.5” nut width: 1 11/16” frets: 22 stainless steel medium/medium fretboard radius: 12” tuners: 3+3 sperzel locking nut: 6061 aluminum (cut for heavy gauge strings)(0.013", 0.020", 0.024", 0.035", 0.046", and 0.056") heel pocket: fender strat style (5/8” deep, 2.18” heel width, 3” total length, 5” radius heel curve) thickness: .700” at nut, .725” at 7th fret, .740” at 12th fret .760” at 15th fret neck shape: very flat u shape, maximum thinness without structural loss, no tapered heel includes: 4 stainless steel 1 1/2 “ 10-24 mounting bolts, backplate, buffing compound, and 2 microfibre cloths frequently asked questions why aluminum? when looking for a neck, there are a lot of different variables to look at. structurally, a solid billet of aluminum will offer the most rigidity of the option possible. there is no truss rod or other materials to stress and strain during temperature or moisture changes. additionally, that additional strength can help with the wear and tear of tour, stages, and other bumps and bruises any guitar will have to sustain during it’s lifespan. sonically, the density of aluminum may give you an advantage with more sustain and over tones, since the neck won’t sympathetically vibrate with the strings. this is, as with anything, certainly up for debate as to what your ears hear and your hands feel. it’s worth noting that it will feel colder to the touch since aluminum is a better thermal conductor than wood, and it does noticeably weigh more. will this fit my guitar? yes: for the most part, if you’re running a telecaster, stratocaster, or jazzmaster, you should be able to bolt this neck directly onto the body. maybe not: if you are running a t-60, jaguar, mustang, or 72’ telecaster deluxe; you cannot run this neck without modifications due to scale and bolt pattern restrictions. if you are confused and unsure, contact a local luthier to help you with your project. it’s a worthy profession to support and you’ll learn new things. if you are considering a guitar not mentioned here, then i’m not sure. can i do the change over myself? yes: most seasoned guitarist can probably do this, yes. but read this: i have pre-drilled the necks and they are tapped with machine bolts. you may have to adjust neck angle, saddle heights, and intonate your guitar afterwords. if your action is still too loose for your preference, a luthier can help you with adjusting the nut string depths to a tighter playing style. the depths are set fairly high to allow for adjustment after installation. what is the 700 series? the 700 series is the first set of necks that i designed, named after the thickness at the nut for the design. i will be continuing this convention for each style going forward, so anything with this thickness will be in the 700 series, and further designs may be in a new series for their specific design requirements. can i get something custom? short answer, yes: i can make a neck for any project. in the recent past i’ve also made custom guitars, hand-wired tube amps, cabs, a few different pedals and even a pickup. custom, multiple runs: if you are a guitar builder and are interested in ordering a batch of necks custom fit and finished for your company or brand, please reach out. i can offer discounts for custom work at scale. fully custom, one-off builds: if you have your sights set on something fully custom, i’d be glad to chat with you about your needs. this process is expensive. the new neck would need to be prototyped, engineered, manufactured, and then finished, all with processes and measurements outside of my normal set-up. you’d be looking at at least a handful of months and a starting price around $5,000. can i get mine cheaper? faster? no affirm asked me to add this, if you use affirm please read this or something like that if you finance with affirm and if one or more items in your order has an extended ship date, your loan payment(s), including interest, may be due before the merchant ships all of the items. please note that you may not receive a rebate of any interest that may have already accrued on an amount that later gets refunded.

The newest aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. designed to work with lower tunings by increasing the scale length of the whole instrument. it is designed to be an aftermarket fit with most stratocasters, telecasters, and jazzmasters. it comes with everything you need to replace your current neck with one from rgi. it will move the scale from a 25.5" to a 27.75", allowing for lower tuning without increasing string gauge. this neck is built and ready to ship today! neck specs: material: 6061 solid billet aluminum scale: 25.5” extended length to 27.75" nut width: 1 11/16” frets: 24 stainless steel medium/medium fretboard radius: 12” tuners: 3+3 sperzel locking nut: 6061 aluminum (cut for heavy gauge strings)(0.013", 0.020", 0.024", 0.035", 0.046", and 0.056") heel pocket: fender strat style (5/8” deep, 2.18” heel width, 3” total length, 5” radius heel curve) thickness: .700” at nut, .725” at 7th fret, .740” at 12th fret .760” at 15th fret neck shape: very flat u shape, maximum thinness without structural loss, no tapered heel includes: 4 stainless steel 1 1/2 “ 10-24 mounting bolts, backplate, buffing compound, and 2 microfibre cloths

Description : unfinished acoustic guitar neck neck for guitar replacement luthier tool . made of material , smooth surface and exquisite workmanship . designed for diy projects or replacement . material : wood package includes : 1 piece neck

The bottom width is about 56mm and the tuner hole is 10mm. nut 42 mm. truss rods are in good working order. it's a beautiful neck. it's on sale now. there are only three left. the original price was $60. now it's $52. with the f logo

The bottom width is about 56. the nut width is about 42mm. the tuner hole is 10mm. truss rods are in good working order. the neck is very beautiful. frosted finish. in the united states, i will send it by sf express, and it will be received in about 15 days.

One piece rosewood flame guitar neck from falkonguitars, features a comfortable “modern c” profile and rosewood fingerboard with 21 medium jumbo frets. also includes a standard truss rod and synthetic bone nut. this neck is made of the highest quality wood and has an excellent grain and color making it a perfect upgrade to rosewood. the top of the fretboard is hand-finished in linseed oil for super smooth playing. all other parts of the neck are finished with a tinted gloss that really makes the flame maple stand out. this neck is perfect as an upgrade if you are building your electric guitar. no expense has been spared in terms of the materials used in this amazing neck. this is a limited run so get yours before they are gone! we send it by dhl express from sweden and it takes only about 3-5 working days. specifications: radius: 9.5′′ profile: modern c synthetic bone nut nut width: 42 mm heel depth: 25.5mm heel width: 55.5mm machine head holes: 10mm flame neck with 21 medium-jumbo frets. falkon guitars is in

Find tele rev headstock 22 jumbo fret maple on maple guitar neck, blk dots adonis usa on ebay in the category musical instruments & gear>guitars & basses>guitar building & luthier supplies.

Unfinished paddle headstock 22 fret roasted maple strat electric guitar neck for custom 25.5"

Paddle headstock unfinished guitar maple neckmaterial: maple with mapledetails: 22 frets ,dot side mark ,trussrod from headstock ,right hand,cusotm headstock .no nut ,black block inlay 1.machine head r: no2.fingerboard length :482mm3.nut size :42.1mm last frets size :56.6mm4.neck joint size hight xwidth xthickness) :113×56.9x26mm5.thickness on 1st frets :21.5mm thickness on 12st frets: 23.4mm6.total length of the neck :699mm