Are you looking for the Guitar Neck Shim Thickness? If so, you’ve come to the right place.
Choosing the Guitar Neck Shim Thickness can be difficult as there are so many considerations, such as Epiphone, WD Music, Ibanez, Charvel, Fender, Stewart-MacDonald, Solo Guitar. We have done a lot of research to find the top 20 Guitar Neck Shim Thickness available.
The average cost is $23.99. Sold comparable range in price from a low of $8.75 to a high of $95.56.
Based on the research we did, we think StewMac Neck Shims for Guitar, Blank, Set of 3 is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Guitar Neck Shim Thickness (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
|
|
|
|
|
||
|
|
|
$38.77
Features:
- 0.25-degree shim offers the most versatility – stacking them will let you really dial in the neck angle you're after.
- 0.5-degree taper is the one you'll reach for most often – it works great on fender and many other solidbody guitars.
- 1-degree taper for guitars with a tune-o-matic bridge or floyd rose.
Features:
- Tools by outback designs. details:outback designs nylon guitar neck shims.
- Introducing ★outback designs’ protective bolt-on guitar plate★.
- This nylon material provides improved durability and effectiveness over standard wooden guitar neck…
Features:
- Never splits, shrinks, or warps
- 4 times stronger than wood
- Can be easily nailed
$14.50
Features:
- Ten wood shims, five thin, five thick. real wood neck shims. we've seen cardboard, plastic, even cut up credit cards used as neck shims on beautiful vintage guitars! stop using…
$36.27
Features:
- To change the angle of a bolt-on neck, players and repair shops have used shims for years. those kinds of shims create an unwanted gap under the heel of the…
$8.75
Features:
- Real wood neck shims, these are our thicker shim at about 1/16" to 1/8" thick, these are straight non-angled shims. we've seen cardboard, plastic, even cut up credit cards used…
$15.00
Features:
- Required to lower the action on lx, elites and other ovations with pointed fretboard end.076 thick genuine honduras mahogany neck shimeasy installation and fitting may require some slight fitting to…
$10.00
Features:
- 3d printed neck shims in 2 and 1.5 degree. full coverage and works great! fits standard fender neck pocket perfectly! save yourself the trouble of trying to make one or…
$13.99
Features:
- Tapered maple shims used to change the angle of a bolt-on neck. to change the angle of a bolt-on neck, players and repair shops have used shims for years. we've…
$13.99
Features:
- Tapered maple shims used to change the angle of a bolt-on neck. to change the angle of a bolt-on neck, players and repair shops have used shims for years. we've…
$12.79
Features:
- Stewmac luthier tools + supplies – stewmac neck shims for guitar, blank, 0.25 degree to change the angle of a bolt-on neck, players and repair shops have used shims for…
Features:
- Broadfix 1.13 in. w x 4 in.
- These shims are widely used in the glazing and wall covering industries due to their high compressive strength and easy stacking.
- For use indoors and outdoors will never warp or swell.
Features:
- Carbon steel construction zinc plated finish ideal set for automotive mechanics sizes: 48-pc. 1/64' 48-pc. 1/32' 24-pc. 1/16' 24-pc….
$12.99
Features:
- Color: golden.
- Material: metal.
- Size: 5x1x0.1cm/ 1.96×0.39×0.03inch.
$27.02
5.0
Features:
- Thickness: .004 / rolls: 15cm x 250cm / a cold rolled, half hard alloy material with a r30 t hardness range of 56/68. because of accurate thickness and temper, it…
$35.99
Features:
- Make sure this fits by entering your model number.
- Made of solid metal to match the guitar neck.
- Keep these on hand for a quick turnaround on this common repair.
$14.50
Features:
- High quality material：guitar neck shims are made of high quality solid brass material for durable use to match the guitar neck.
- Widely used: the guitar neck shims are designed to fit onto most electric guitars and basses. protect your favourite guitar from corrosion or damage.
$19.99$14.99
Features:
- Original 1960's fender neck shim to help get your guitar set up how you like….
$43.67
Features:
- Full contact, precisely tapered to change the angle of a bolt-on neck, players and repair shops have used shims for years. those kinds of shims create an unwanted gap under…
$12.81
Features:
- Product description guitar neck shim 0.2mm 0.5mm 1mm thickness brass shims electric-guitar e-bass about the product 1. high quality material:guitar neck shims are made of high quality solid brass material…
1. Stewmac Neck Shims For Guitar, Blank, Set Of 3
Product Details:
Full contact, precisely tapered to change the angle of a bolt-on neck, players and repair shops have used shims for years. those kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. as dan erlewine describes in his guitar player repair guide: "this gap may cause an upward kink in the neck. and many players feel they lose tone unless firm contact is maintained between the neck and the body." dan creates tapered shims that cover the entire heel of the neck. with these bolt-on shims, that work is done for you. attention repair shops: making a quality shim takes time. keep these on hand for a quick turnaround on this common repair. these blank shims are designed for odd screw spacings, smaller neck pockets, and custom designs like the fender micro-tilt. this set includes 3 hard maple shims, each at a different taper for changing the pitch of any bolt-on neck: 0.25-degree shim offers the most versatility stacking them will let you really dial in the neck angle you're after. 0.5-degree taper is the one you'll reach for most often it works great on fender and many other solidbody guitars. 1-degree taper for guitars with a tune-o-matic bridge or floyd rose. dimensions: 2-1/4 inch x 3 inch (57.15mm x 76.12mm) taper specs (approximate): 0.25-degree tapers from 0.030 inch to 0.019 inch (0.76mm to .048mm) 0.5-degree tapers from 0.028 inch to 0.008 inch (0.71mm to .020mm) 1-degree tapers from 0.060 inch to 0.010 inch (1.52mm to .025mm)
2. Outback Designs Guitar Neck Shims – Durable Bolt-On Neck Plate For Guitar And Bass Repair – Protective Guitar Neck Gasket Made From Flexible Nylon –
Product Details:
Heavy-duty nylon guitar shim – our bolt-on neck shims for guitars have been expertly crafted using high-end flexible nylon plastic. neck protection with no air pocket – these guitar plate shims have been carefully angled and molded in order to provide the exact angle of tilting you need with absolutely no air pocket, protecting your guitar's neck and base from wear and damage. perfect for guitar repair – whether you're installing a new sized bridge or simply repairing the neck, our guitar neck shims are designed to fit onto most electric guitars and basses. these are also available in the sizes 0.25°, 0.5°, and 1°. these guitar neck gaskets are also a great gift idea for any guitar player. no questions asked!
Specifications:
| Product Dimensions | 6 x 4 x 1 inches |
| Color Name | Black |
3. Ez Shim Etc-2 1.12 X 8 In. Shim Heavy Duty Black – Pack Of 36
Product Details:
8" plastic ez-shim always breaks clean. never splits, shrinks, or warps. 4 times stronger than wood. can be easily nailed. ez-shim are made from recycled materials and are reusable. each case contains 36 sheets of 10 shims, total of 360 shims per bulk case. 10 upc code stickers are included for individual sheets. no. etc-2: dimensions: 8" l, material: plastic, pkg qty: 36, package type: box
Specifications:
| Country of Origin | USA |
| Dimensions | 8 In. L |
| Package Quantity | 36 |
| CID | 1 |
Reviews:
Great product, quickly shipped!toomanyinductors
4. 10) Thin & Thick Neck Shims For Electric Guitar Neck Pocket 2 1/4" X 3
Product Details:
Ten wood shims, five thin, five thick. real wood neck shims. we've seen cardboard, plastic, even cut up credit cards used as neck shims on beautiful vintage guitars! stop using garbage for neck shims. commercial neck shims are very expensive. we offer reasonably priced real wood neck shims. we have various assorted dark woods and light woods available. the auction is for 10 assorted wood neck shims, these are straight non-angled shims. these shims are made from assorted woods which can include, maple, mahogany, rosewood, koa, birch, spruce, cherry, etc. the thin shims are about 1/40-1/42" and the thick are about 1/16"-1/8". with this purchase the buyer will receive 10 assorted, 5 thick and 5 thin wood neck shims. they are approx. 2 1/4" by 3 1/8". they are intended for a electric guitar neck pockets. they are very thin, rough cut (not square) and not perfect. all thin shims layered together give a thickness of about 1/8". they will need to be trimmed and or neck holes drilled to fit your project. if you nee
5. Stewmac Neck Shims For Guitar, Shaped, Set Of 3
Product Details:
To change the angle of a bolt-on neck, players and repair shops have used shims for years. those kinds of shims create an unwanted gap under the heel of the neck, dead airspace where humidity condenses to swell the wood. made of solid maple to match the guitar neck. better than the typical homemade "guitar pick" neck joint shims, these tapered shims cover. keep these on hand for a quick turnaround on this common repair. the set includes 3 hard maple shims in the following tapers, 0.25-degree taper, 0.5-degree taper, and 1-degree taper.
6. 5) Thicker Wood Neck Shims For Guitar Neck Pocket 2 1/4" X 3 1/8"
Product Details:
Real wood neck shims, these are our thicker shim at about 1/16" to 1/8" thick, these are straight non-angled shims. we've seen cardboard, plastic, even cut up credit cards used as neck shims on beautiful vintage guitars! stop using garbage for neck shims. commercial neck shims are very expensive. we offer reasonably priced real wood neck shims. we have various assorted dark woods and light woods available. we also have thinner wafer shims at approximately 1/40" available. the auction is for 5 assorted wood neck shims. these shims are made from thin rosewood, walnut, mahogany, maple, spruce, or other assorted real woods. it is cut thin and perfect for neck shims. for each single auction purchase the buyer will receive 5 assorted wood neck shims. they are approx. 2 1/4" by 3 1/8" and about 1/16"-1/8" thick. they are intended for a electric guitar neck pockets. they are thin, rough cut (not square) and not perfect. they will need to be trimmed and or neck holes drilled to fit your project. if you need a thinner
7. Ovation Lx Neck Shim
Product Details:
Required to lower the action on lx, elites and other ovations with pointed fretboard end.076 thick genuine honduras mahogany neck shimeasy installation and fitting may require some slight fitting to your particular ovationthe mahogany is very soft and can be easily shapedmint conditionsee other listings having different thicknesses
8. 2 Fender Strat Or Tele Neck Shims
Product Details:
9. Stewmac Universal .5 Degree Maple Neck Shim For Guitar Or Bass
Product Details:
Tapered maple shims used to change the angle of a bolt-on neck. to change the angle of a bolt-on neck, players and repair shops have used shims for years. we've seen everything from matchbook covers to guitar picks stuck in neck joints. those kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. full contact and precisely tapered: we have 3 different degrees for changing the pitch of any bolt-on neck. 0.25-degree shim offers the most versatility. stacking them will let you really dial in the neck angle you're after. 0.5-degree shim is the one you'll reach for most often. it works great on fender and many other solidbodies. 1-degree shim is great for guitars with a tune-o-matic bridge or floyd rose. taper specs (approximate)0.25-degree shim tapers from 0.030" to 0.019" (0.76mm to 0.48mm)0.5-degree shim tapers from 0.028" to 0.008" (0.71mm to 0.20mm)1-degree shim tapers from 0.060" to 0.010" (1.52mm to 0.25mm) dimensionsblank: 2-1/4" x 3" (57.15mm x 76.12mm) blank shims were designed for odd screw spacings, smaller neck pockets, and custom designs like the fender micro-tilt . made of hard maple to match the neck wood. this listing is for one (1) .5 degree blank neck shim.
10. Stewmac Universal .25 Degree Maple Neck Shim For Guitar Or Bass
Product Details:
Tapered maple shims used to change the angle of a bolt-on neck. to change the angle of a bolt-on neck, players and repair shops have used shims for years. we've seen everything from matchbook covers to guitar picks stuck in neck joints. those kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. full contact and precisely tapered: we have 3 different degrees for changing the pitch of any bolt-on neck. 0.25-degree shim offers the most versatility. stacking them will let you really dial in the neck angle you're after. 0.5-degree shim is the one you'll reach for most often. it works great on fender and many other solidbodies. 1-degree shim is great for guitars with a tune-o-matic bridge or floyd rose. taper specs (approximate)0.25-degree shim tapers from 0.030" to 0.019" (0.76mm to 0.48mm)0.5-degree shim tapers from 0.028" to 0.008" (0.71mm to 0.20mm)1-degree shim tapers from 0.060" to 0.010" (1.52mm to 0.25mm) dimensionsblank: 2-1/4" x 3" (57.15mm x 76.12mm) blank shims were designed for odd screw spacings, smaller neck pockets, and custom designs like the fender micro-tilt . made of hard maple to match the neck wood. this listing is for one (1) .25 degree blank neck shim.
11. Stewmac Neck Shims For Guitar, Blank, 0.25 Degree From Stewmac. Stewmac Luthier Tools + Supplies
Product Details:
12. Broadfix Revolutionary Flat Shims (Set Of 3)
Product Details:
Broadfix 1.13 in. w x 4 in. for use indoors and outdoors will never warp or swell. width: 1.13 in. length: 4 in. broadfix 1.13 in. w x 4 in. these shims are widely used in the glazing and wall covering industries due to their high compressive strength and easy stacking. for use indoors and outdoors will never warp or swell.
Specifications:
| Package Dimensions | 10.39 x 7.48 x 4.06 inches |
| Shape | Rectangular |
13. Cal Hawk Tools 144-Pc. Alignment Shim Assortment
Product Details:
Specifications:
| Case Quantity | 24 |
| Item Package Dimensions (L x W x H) | 8.25" x 4.25" x 1.13" |
Reviews:
Great fit and finish…4028_falk
Great value great qualitysicilianjoe13
14. Guitar Brass Neck Shim Shims Tools Acessories Replacement Heightening Gasket Accessories Golden Gasket Parts, Size: 5x1cm
Product Details:
Description are you looking for a professional, yet affordable guitar neck shim? are you in search of a sturdy, trustworthy tool that can do multiple jobs at once? if yes, look no further! our professional guitar neck shim must meet you needs. it is one of the best choices for you. features –
Specifications:
| Assembled Product Dimensions (L x W x H) | 1.97 x 0.39 x 0.04 Inches |
15. 10cm Thick Brass Shim Stock / 6 X 100
Product Details:
Specifications:
| Thickness (Decimal Inch) | 0.0040 |
| Width (Inch) | 6 |
| System Of Measurement | Inch |
| Material Grade | 260 Alloy |
Reviews:
Very easy to work and bend, especially after annealing.LOUIS
Its a great help for my task.FRANK
16. Alnicov 4pcs Guitar Neck Shims 0.2mm 0.5mm 1mm Thickness Brass Shims For Electric Guitar Bass Luthier Tools(Chrome)
Product Details:
Made of solid metal to match the guitar neck keep these on hand for a quick turnaround on this common repair used to change the angle of a bolt-on guitar neck,giving your guitar a better sound quality the guitar shims set includes 3 thickness sizes brass shims: 0.2mm(2pcs),0.5mm and 1mm,necessary luthier tools for electric guitar bass players the guitar neck shims are very easy to operate and install description: 1. made of brass material,designed for long time use and durable 2. guitar shims set,with 3 thickness sizes 3. standard material,accurate size for giving your guitar better sound quality 4. easy to carry, economical and durable 5. compact and lightweight,easy to install,can be replaced specifications: product name:guitar neck shim color:chrome material:brass thickness: 0.2mm,0.5mm,1mm item weight:6g package included: 2pcs x 0.2mm shims 1pcs x 0.5mm shims 1pcs x 1.0mm shims
Specifications:
| dimensions | 9 x 7 x 0.02 cm; 10 Grams |
17. 8pcs Saphue Guitar Neck Shims 4pcs 0.2mm, 2pcs 0.5mm And 2pcs 1mm Thickness Brass Shims For Guitar And Bass Bolt-On Neck Repair(Gold)
Product Details:
High quality material:guitar neck shims are made of high quality solid brass material for durable use to match the guitar neck. functions:these shims worked well to elevate and angle the neck in order to give more adjustability to the bridge and to help make the setup more in line with your playing preferences. size: the guitar shims set includes 3 thickness sizes brass shims: 0.2mm(4pcs), 0.5mm(2pcs) and 1mm(2pcs), necessary luthier tools for electric guitar bass players. widely used: the guitar neck shims are designed to fit onto most electric guitars and basses. protect your favourite guitar from corrosion or damage. saphue guitar neck shims are great tools to change the angle of a bolt-on guitar neck for giving your guitar better sound quality. features: set includes 8 shims in the following tapers: 0.2mm, 0.5mm,1mm thickness used to change the angle of a bolt-on guitar neck keep these on hand for a quick turnaround on this common repair specification: color: gold. material: brass. size: 42×3.7×0.7cm/16.5×1.5×0.3inch. package includeds:(8 hard shims ) packing includes: 4pcs x 0.2mm shims 2pcs x 0.5mm shims 2pcs x 1.0mm shims
Specifications:
| Package Dimensions | 4.69 x 2.88 x 0.16 inches |
| Color Name | Gold |
18. Fender Neck Shim Black 1964
Product Details:
19. Stewmac Neck Shims For Bass, Blank, Set Of 3
Product Details:
Full contact, precisely tapered to change the angle of a bolt-on neck, players and repair shops have used shims for years. those kinds of shims create an unwanted gap under the heel of the neck: a dead air space where humidity condenses to swell the wood. as dan erlewine describes in his guitar player repair guide: "this gap may cause an upward kink in the neck. and many players feel they lose tone unless firm contact is maintained between the neck and the body." dan creates tapered shims that cover the entire heel of the neck. with these bolt-on shims, that work is done for you. attention repair shops: making a quality shim takes time. keep these on hand for a quick turnaround on this common repair. these shaped shims fit most neck pockets with a rounded heel. this set includes 3 hard maple shims, each at a different taper for changing the pitch of any bolt-on neck: 0.25-degree shim offers the most versatility stacking them will let you really dial in the neck angle you're after. 0.5-degree taper is the one you'll reach for most often it works great on fender and many other solidbody guitars. 1-degree taper is great for basses with a post mounted bridge. dimensions: 2-1/2 inch x 3-7/8 inch (63.50mm x 98.43mm) taper specs (approximate): 0.25-degree tapers from 0.030 inch to 0.019 inch (0.76mm to .048mm) 0.5-degree tapers from 0.028 inch to 0.008 inch (0.71mm to .020mm) 1-degree tapers from 0.060 inch to 0.010 inch (1.52mm to .025mm)
20. Guitar Neck Shim 0.2mm 0.5mm 1mm Thickness Brass Shims Electric-Guitar
Product Details:
Product description guitar neck shim 0.2mm 0.5mm 1mm thickness brass shims electric-guitar e-bass about the product 1. high quality material:guitar neck shims are made of high quality solid brass material for durable use to match the guitar neck. 2. functions:these shims worked well to elevate and angle the neck in order to give more adjustability to the bridge and to help make the setup more in line with your playing preferences. 3. size: the guitar shims set includes 3 thickness sizes brass shims: 0.2mm(4pcs), 0.5mm(4pcs) and 1mm(2pcs), necessary luthier tools for electric guitar bass players. 4. widely used: the guitar neck shims are designed to fit onto most electric guitars and basses. protect your favourite guitar from corrosion or damage. 5. satisfaction guarantee: we stand by our quality commitment and will guarantee you 100% satisfaction of the guitar neck shims. please do not hesitate to contact us if there is any question. we will do our best to solve the problem as soon as possible. description: c
Related posts:
- Electric Guitar Neck Width Comparison For Sale (2024 Update)
- Guitar Neck Threaded Inserts For Sale (2024 Update)
- Acoustic Guitar String Tension For Sale (2024 Update)
- Best Guitar Pick Punch (2024 Update)
- Best Pick For Electric Guitar (2024 Update)
- Best Pick Thickness For Acoustic Guitar (2024 Update)
- Guitar String Order From Lowest To Highest For Sale (2024 Update)
- Guitar String Tension Formula For Sale (2024 Update)
- Double Neck Guitar Gig Bag For Sale (2024 Update)
