Are you looking for the Gary Brawer Guitar Bass Repair? If so, you’ve come to the right place.
Choosing the Gary Brawer Guitar Bass Repair can be difficult as there are so many considerations, such as WD Music, Fender, Floyd Rose. We have done a lot of research to find the top 20 Gary Brawer Guitar Bass Repair available.
The average cost is $330.59. Sold comparable range in price from a low of $9.99 to a high of $2299.99.
Based on the research we did, we think Electric Bass Guitar Wall Chart is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling Gary Brawer Guitar Bass Repair (20 Sellers)
Product Image | Product Name | Features | Check Price |
---|---|---|---|
|
|
||
|
|
||
|
|||
|
|||
|
|||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
$9.99
5.0
Reviewers Noted:
Sturdiness
Features:
- Mel bay.
- With fingerboard note & master chord reference.
- By william bay.
Reviewers Noted:
Easy to install . Sound quality . Craftsmanship
Features:
- ✔ solder-less install & pickup changes
- ✔ improved clarity
- ✔ smoother volume & tone control taper
Features:
- This expanded edition for beginners to experts
- It is a step-by-step manual to maintaining and repairing electric and acoustic guitars and basses
- Players learn how to set up a guitar
$10.09
5.0
Features:
- Category: reference
- Sub category 1: instruments
- Medium: softcover
Features:
- Get a perfect bend on enough wire for a whole guitar in just seconds.
- Convenient fret wire bender tool for luthiers, easy to install.
- Precisely radiused fretwire makes your fretwork fast, accurate, and professional.
$2299.99
4.8
Reviewers Noted:
Good sound quality . Attractive . Well made . Weight . Durable
Features:
- The ultimate production 5-string j-bass
- State-of-the-art performance, vintage-inspired tone
- Classic design with high-performance features
Reviewers Noted:
Attractive . Well made . Durability . Ease of use . Sound quality
Features:
- Fender bass corona guitar neck plate no adjustment hole
- Genuine fender part
- Use this plate for guitars without a micro-tilt neck and basses
Reviewers Noted:
Well made . Attractive . Ease of use . Sound quality . Ease of installation
Features:
- Product information.
- Standard guitar fret wire pre-cut into 24 pieces and pre-radiused to 9.5\".
- Specifications.
Reviewers Noted:
Good sound quality . Attractive . Well made . Durable . Weight
Features:
- Basswood body
- Bolt-on maple neck, 21 medium jumbo frets
- Low-noise humbucking pickup, 2-band eq
Reviewers Noted:
Well made . Easy to use . Attractive . Good sound quality . Durability
Features:
- Vhodné pro: electric bass guitar
- Country of origin: south korea
- Colour: chrome
$159.00
4.8
Reviewers Noted:
Good sound quality . Well made . Easy to install . Visual appeal . Durability
Features:
- Product information.
- Specifications.
- Large diameter alnico 5 rod magnets and a high output coil wind deliver the most tone …
$252.00
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- This is the exact neck you'll receive!
- Weight – 1lbs 9.7oz.
- This replacement neck is for a fender or squier by fender guitar.
Reviewers Noted:
Lightweight . Well made . Good sound quality . Attractive . Durable
Features:
- Compact travel bass
- Humbucker pickups
- Volume and sound can be adjusted by rotating knob
Reviewers Noted:
Craftsmanship
Features:
- High quality replacement wiring kit for fender precision bass – not intended for use with guitars using metric components
- 2x cts 450g series 250k dish back short solid shaft audio taper pots – 10% tolerance
- 3 feet vintage-correct 22awg tinned cloth push back wire (18 inches black and 18 inches white)
Features:
- Set of four polished chrome tuning machines
- 20: 1 gear ratio
- "clover"-style keys
$2099.99
4.9
Reviewers Noted:
Good sound quality . Attractive . Well made . Durability . Weight
Features:
- Fender american ultra precision bass rosewood mocha burst.
- Part exchange your bass.
- Try the fender american ultra precision in store now!
$14.50
5.0
Reviewers Noted:
Sound quality
Features:
- Inner potentiometer: 500 kohm logarithmic, 4.77 mm diameter
- Outer potentiometer: 500 kohm logarithmic, 6.75 mm diameter
- Solid shaft
$249.99
4.8
Reviewers Noted:
Craftsmanship . Durability . Sound quality . Visual appeal
Features:
- Durable gloss-polyester finish
- Routed for ss pickup configuration
- Pre-drilled bridge mounting screw holes
$124.39
4.7
Reviewers Noted:
Durable . Good sound quality . Attractive . Ease of installation . Craftsmanship
Features:
- Individually intonatable and height adjustable saddles
- Saddles nested in slots to stop sideways movement
$499.99
4.7
Reviewers Noted:
Craftsmanship
Features:
- Fully tested
- 100% functional
- Very good condition
1. Electric Bass Guitar Wall Chart
Product Details:
Specifications:
Length | 24 in |
Height | 0.1 in |
Width | 35 in |
Reviews:
2. Obsidianwire Vintage Plus For Precision Bass Solder-Less Wiring Harness
Product Details:
Quick and easy install without touching a soldering iron. obsidianwire builds pro-wired electronics for guitar and bass, with super sturdy and easy to use solder-less connectors. that means that you can install your new wiring harness, or do solder-less pickup changes, without having to set aside much more time than a string change. a pop in upgrade for your stock precision bass wiring harness which goes further for improved play-ability, and sound. obsidianwire pro-wired electronics use high spec, professional grade components which are an absolute upgrade over your stock fender wiring harness. this prevents tone 'muddiness' at low volumes by allowing high frequencies to pass along a separate path to your amp, rather than being stopped short by the increasing resistance at the volume control. obsidian guitar wiring mods are designed for superior sound, with improved clarity and control.
Specifications:
Watchers | 3 |
Finish | Obsidian |
Reviews:
I decided to try this product because I was having problems with the previously installed new harness. This thing says "quality" – excellent workmanship, and it made my Precision Bass sound better that it ever has before. My only complaint is the wiring connectors – I think that a connector with screw connections would be more fool-proof. I have cloth covered wiring, and I had a bit of trouble getting the wires into the connector. I still rate it "AAA+++" !prbraud
A great product for me as I've changed pickups several times. I've tried other prewired harnesses, but these are the most solid and sound great. I have the 250k in my Fender American Standard P Bass with flats for a more old school tone and a 500k in another P Bass with rounds for a more modern tone.ge00103
Easy peasy to install1bassplayin
3. Guitar Player Repair Guide: How To Set Up, Maintain, And Repair Electrics And Acoustics [Book]
Product Details:
Bookthis expanded edition for beginners to experts is a step-by-step manual to maintaining and repairing electric and acoustic guitars and basses. players learn how to set up a guitar and keep it in top form by mastering basic maintenance. features an essential dvd that makes guitar maintenance easier than ever. new features include set-up specs of leading players; stronger coverage of guitar electronics, including pickups and wiring diagrams; and expanded coverage of acoustics.
Specifications:
Dimensions | 216 x 280 x 22mm | 966g |
Imprint | Backbeat Books |
Publication City/Country | Milwaukee, United States |
Language | English |
Edition Statement | Third Edition |
Reviews:
Excellent, well presented and decribed!! If you own a guitar and want to know more about its physics; how to get the most from it; how to keep it in good condition; and, how to undertake both basic and more advanced repairs/modifiactions, this book is fundamental!! Its written in clear, easy to understand language and it takes tme to explain things fully!crailin-0
I got a used electric on Ebay that had horrible intonation. I dug out my old Homespun Tapes video on guitar maintenance & repair only to have the VCR eat the tape. The video was no longer published. I found another nice looking one by the Learn & Master folks–but too expensive. So….Back to Ebay. The seller "1dayx" had a copy of this & for about 1/3 the price of one of the DVD's, I got this book which comes with a video CD. Set up problems solved with a book AND video examples. Even more, this book is really comprehensive, covering both acoustic and electric guitars. With the video examples, I'm now able to do my own basic set up & maintenance. GREAT VALUE!studiohope
Our son got into guitars in a big way. So my wife enthusiastically purchased him a Fender Jazz Bass, a Gibson LP and a Taylor nylon acoustic, all second hand at a third of the cost of brand new, but all in mint condition. Knowing little about guitar maintenance / setup, my frugal wife discovered it would quickly add up taking all these second hand guitars into the "experts". Using Dan's book, we re-strung the Fender and adjusted, the Gibson was within specification and the "bird nest" at the Taylor's stock head was tidied up. We also have a Stratocaster copy (Cimar by Ibanez) that we purchased for $50 years ago. With Dan's book, we discovered virtually every conceivable guitar setting on this Strat copy was completely out! With a new set up strings, several hours' set up work, we got the Strat copy within acceptable specification and sounding quite good. Dan's book is an excellent reference for the DIY-er, along with anecdotal stories of various guitar artists whom he's dealt with over the years. Dan's book covers both acoustic and electric guitars. Next project is learning how to play them!BigTony
4. The Acoustic Guitar Repair Detective: Case Studies Of Steel-String Guitar Diagnoses And Repairs [Book]
Product Details:
Learn to diagnose common problems relating to the adjustment, upkeep and repair of your acoustic guitar, as well as nylon-string guitars and ukuleles. topics include: humidity * cracks * braces * bridge plates * frets * guitar action * intonation * neck angle * tuning machines * strings * strap buttons * end pins * buying a used guitar * cleaning & polishing * pickups * and much more.
Specifications:
Age Range | 15+ years |
Language | English |
Original Languages | English |
Assembled Product Dimensions (L x W x H) | 8.80 x 5.70 x 0.40 Inches |
Reviews:
5. Guyker Guitar Fretwire Bender – Fret Wire Bending And Straightening Luthier Tool For Guitar & Bass Radian Adjusters, Repair & Maintenance
Product Details:
Make sure this fits by entering your model number. guitar fret bender, with adjustable thumbwheel, quickly adjust thumbwheel allows you to control radius. ergonomics crank handle design, practical and convenient, save time and effort. get a perfect bend on enough wire for a whole guitar in just seconds. it can be adjusted for various specifications and models, convenient and practical. a convenient fret wire bender tool for luthiers. precisely radiused fretwire makes your fretwork fast, accurate, and professional. package includes 1 x fret wire bender, 2 x hex wrench.
Specifications:
Package Dimensions | 7.7 x 4.5 x 3.3 inches |
6. Fender American Ultra Jazz Bass V, Maple Fingerboard, Arctic Pearl
Product Details:
A sensational bass guitar built for proper performers. the fender american ultra jazz bass v combines a range of premium features to deliver an overall playing experience that's simply perfection. with a pair of ultra noiseless vintage jazz bass single-coil pickups, you get crystal-clear tone that'll never be ruined by interference or feedback. you'll have more control over your tone than ever before thanks to the magnificently versatile electronics loaded into the american ultra jazz bass. featuring separate boost/cut knobs for bass, midrange, and treble, you'll have total agency over your bass' voice. there's also top-class playability and stunning style in this 5-string bass, too. an instrument for the real pros out there.
Specifications:
Body Finish | Gloss Urethane |
Body Shape | Jazz Bass |
Bridge Pickup | Ultra Noiseless Vintage Jazz Bass |
Neck Pickup | Ultra Noiseless Vintage Jazz Bass |
Configuration | SS |
Bridge | 5-Saddle HiMass (Toploaded) |
Hardware Finish | Nickel/Chrome |
Pickguard | 4-Ply Tortoiseshell |
Control Knobs | Vintage-Style Black Plastic Jazz Bass |
Neck Plate | 5-Bolt |
Neck Material | Maple |
Neck Construction | 5-Bolt |
Neck Binding | Black |
Neck Finish | Satin Urethane with Gloss Urethane Headstock Face |
Neck Shape | Modern "D" |
Scale Length | 34" (86.36 cm) |
Fingerboard Material | Maple |
Fingerboard Radius | 10" to 14" Compound Radius (254 mm to 355.6 mm) |
Number of Frets | 21 |
Fret Size | Medium Jumbo |
Nut Material | Bone |
Nut Width | 1.875" (47.6 mm) |
Position Inlays | Black Pearloid Blocks |
Truss Rod | Bi-Flex |
Reviews:
I've owned and played bass guitars for 30 years now and I've owned several fender basses and the myriad clones out there of the J and P basses. That history and background left me with a bias against fender and an eye for other "better" production guitars like the Stingray which is my other go-to bass. That being said, I am blown away by this bass. It is a SOLID instrument with no flaws or blemishes that I can detect. It came from the factory with an almost perfect setup. I had to make a minor intonation adjustment on the low B and E strings but the string height, pickup height, and neck position were perfect. Fender's Ultra Noiseless pickups (a stacked humbucker really) sound great in passive mode emphasizing a fat bottom end and the tone nob adds a good bit of mids. The highs are kinda meh for me but the active switch takes care of that and I can get as bright as I want. The 18v active preamp provides a lot of room to boost or cut low, mid, and high frequencies to get just about any sounds I want (I still prefer my Sting Ray if I want to get real funky). This is about the best sounding 5-string I've had. Most 5-strings sounds great as 4-strings and SUPER muddy when you work the low-b string but this bass brings it out without too much mud.T. DeWees
I bought this base back in April 2022. It sounds great and plays great. However, the front pickup recently quit all together. After a tech looked at it, it was discovered that it was a bad front pickup. It was beyond the store warranty, so I took it up with fender. After 2 weeks of going back and forth between them and the store that I bought it at, it was determined that fender would send the pickup to the technician if my choice and they would fix it. But it would take 30 days because they send it directly from the manufacturer. Which still boggles my mind, because the slowest mail would be less than a week? So my opinion of fender customer service has dropped considerably. A working musician doesn't have 30 days to do without their instrument. This is unacceptable. I decided to purchase the pickup myself. I can get it in the mail in 2 days, and put it in myself. However this is a great base if you happen to get one with good parts in itJerry
This immaculately fabricated Fender Precision (Japanese made) is the ultimate in understated seventies chic, think JJ Burnel or even Roger Waters – whether youre into punk or prog (or bothprunk?!?) this bass will do it. Its slightly neck heavy which is probably due to it having a basswood body but hey, it looks damned fine so Ill let it slip. The tone is superb, just slapping that E string is enough to shake a songs foundation. As Ive mentioned before, construction, fit and finish is top-notch, in fact as good as USA quality. Of all the 70s inspired reissues offered by the Fender family, this is the one to get!istvanskiuk
7. Fender American Series Bass Neck Plate (Chrome)
Product Details:
The name fender is synonymous with quality of the highest degree, so to upkeep these fine instruments requires only the best parts. official fender parts are specially designed to keep your fender instrument playing as well as the first time you picked it up. this fender neck plate is stamped with "fender corona california" and is designed for use on most fender basses using four-screw neck mounting without micro-tilt adjustment. mounting screws are included.
Specifications:
Product Dimensions | 11.42 x 7.48 x 3.54 inches |
Country of Origin | USA |
Is Discontinued By Manufacturer | No |
Color Name | Chrome |
Compatible Devices | fender guitar or bass |
Reviews:
I put together my own Stratocaster, the build took about a year and a half as genuine fender quality parts can get pricey. The neck plate made my strat look legit and high quality. As a professional musician I'm a stickler on quality parts for my instruments and I can tell tell you with 100% confidence that buying genuine fender parts for your build is worth every penny they just look, feel and sound good.Pablo
Be aware these are about 19 grams in weight and are made of some kind of aluminium alloy. The old strat plates were made of some other heavier non magnetic metal. My strats old plate weighed in at 59 grams; both are roughly about 2.2 mm thickness. The fender f plate and vintage plate are both chrome plated steel, (well magnetic material anyway). The vintage plate is about 32 grams and very thin at about 1.2 mm. The f plate is about 1.5 mm, and a little heavier the vintage, (on guitar so could not weigh). The corona plate seems strong and it has a good chrome finish. I marked it down one star due to the radical weight difference over previous plates, but I'm sure it is strong enough to last. Fender also confirmed that these plates are correct and used on newer strats.goldfinger1976
8. Fender Standard Guitar Fret Wire
Product Details:
Specifications:
Product Dimensions | 5.24 x 0.24 x 4.49 inches |
Country of Origin | USA |
Is Discontinued By Manufacturer | No |
Color Name | Chrome |
Reviews:
Pre-bent to a slightly tighter radius. This eased installation a great deal. Not cut to uniform lengths, but they were all long enough to get the job done. The cuts were a little sloppy, but they must be filed and finished at the ends either way. Needed very little levelling and dressing. Overall great quality fretwire with uniform radius bends.20 Fingers McGee
The fret wires come in over sized lengths with plenty to work with. I was concerned that the grooves from the removed large jumbo frets would be too loose but they have more than enough tangs that fill and grips the rosewood which can be a bit 'chippy'. I had to adjust the radius of each one which was a bit of a pain that would have been much easier if they left them straight. They filed, leveled and crowned well and are just a bit taller than expected it good quality.001Berek
They are a high quality precision fret wire! After 3 of the Fender frets were installed, I contnually checked fret rocking and was suprised at the results, only 3 frets needed minor leveling after installation was completed. Now my import guitar plays like a High End instrument.timmci85
9. Sterling By Music Man Stingray Ray4 Bass Guitar (Vintage Cream)
Product Details:
The stingray bass has a long and storied history, with players ranging from tim comerford (rage against the machine) to louis johnson (michael jackson thriller album) it's no surprise that generations have taken up the stingray mantle. its versatility through the clever inclusion of a 2-band pre-amp has set the stingray apart from its competitors. under the bridge the basswood body provides the sturdy foundation for the whole ray4 tone and the six screw bolt-on on neck maintains an excellent sustain for long smooth bass sounds. the neck is made from hard maple with a maple or jatoba-fingerboard depending on which colour bass you choose. this tough material will not only last but evolve with your playing. fistful of steel the ray4 is fitted with a classic fixed bridge which is both elegant and strong. the open gear machine heads provide a high level of tuning accuracy and stability. the ceramic humbucker is passive but married to the active 2 band eq powered by an internal 9-volt battery the options to boost the output and shape the tone are there. wanna' be startin' somethin' the ray4 is finished in a variety of colours and has the classic teardrop pickguard in black or white depending on which colour bass you choose. with bass luminaries such as flea, john deacon or cliff williams you know you are in good company and playing a versatile tone monster. the ray4 has a musical heritage that belies its tiny price tag and well worth the investment.
Specifications:
Weight | 9 lb |
Reviews:
Almost 40 years of playing experience and this bass is by far the best value that I've experienced. I've had my share of Precisions, Jazz basses, etc. over the years up to the $1500 range. When the pandemic kicked in I had sold most of my equipment but decided I had to have one bass. The neck is solid and similar to a P-bass thickness which I prefer and I don't need a 24-fret, 2 octave one anymore based on playing blues, jam, reggae, and rock. The tonal landscape is phenomenal rolling off the treble or bass dependent upon what I'm playing. Bright highs and deep lows are easily accomplished. I've never written a review before, but this was worthy of the time. Enjoy!Steve
Sound: when you own a sterling bass you do know, what your getting in quality . this bass is heavier then my sterling sub music man. same bass just diff color .the pick up of course is still amazing ,from my sub to this bass today. Ease of Use: i pulled out the box, was not in tune from shipping of course. used my d,addario head stock tuner on it, was only off a little from shipping. easy to retune and play out of the box. Quality: i love these bass., i have small hands. witha full scale to the get the best of the tone possible, long scale is the only way for me. small hand will use the neck as a whole. Value: would buy this for any one starting. would also buy another my self lol i have two lol Manufacturer Support: never had an issue Overall: awesome for the money, get great workmenship right out of the box, a small tune . after shipping of course. love the balance and small necks for my small hands. does not take away sustain. bass talks if you listen. so this is the second one i owned and would own another.Mickey
I'm a long time guitarist with some really fine instruments who decided to pick up a "value" bass just to learn for fun. Knowing what to look for in guitars, I translated that over to basses and went to GC to try some out, see what appealed to me, and how far I could stretch the dollars I was willing to spend on an instrument to start out and, maybe, stick with. I found this Sterling by Music Man Ray4 in mint green that filled the bill on all fronts. As usual, the guys at GC let me try several instruments and test to my hearts content. I do all my own guitar set-ups and would never buy a guitar sight unseen, being worried about how much adjustment might be needed. The Ray4 wasn't too bad out of the box (quite literally because I didn't like the display instrument and they had another in stock for me to try). Once home, I did adjust neck relief, string height, intonation, and pickup to a point that I liked best. The pickup required the most adjustment actually because it had gotten stuck in an odd and very high position, perhaps from being jostled in shipping. There is some fret sprout on the higher frets, but nothing that would bother my hand. Bottom line: Everything could easily be adjusted to where I really like it and has been stable now over several days. It's comfortable to play and is, in my opinion, a real "looker." The satin finished neck is great and, although I usually don't go for maple fret boards, I do like this one. I'm very pleased with my purchase decision and would buy it again. Now onto attack that fret sprout . . .AARP Rocker
10. Fender Himass 4-String Bass Bridge Assembly With Zinc Saddles – Chrome
Product Details:
Add sustain, resonance and improved attack without significantly altering your tone when you add this precision manufactured himass bridge to your 4-string bass. the zinc saddles impart thick, round tone while the .75" string spacing ensures you'll have plenty of room for your flying fingers. precision manufactured as a direct drop-in replacement for vintage-style fender models; this bridge mounts via four screws. mounting hardware not included.
Specifications:
Intended Instrument | Vintage-style Fender Basses |
Bridge Style | Top-loading Hardtail |
Saddles | Zinc |
Spacing | 0.75" String Spacing |
Finish | Chrome |
Reviews:
This is identical to the bridge on the Geddy Lee signature J Bass, only it has FENDER engraved on it and not Geddy's signature. I installed this on a Squier J, dropped right on, set the action and intonation and was good to go. Even playing without being plugged in you can notice a difference in sustain and overall vibration transmitted through the body. Bang for buck it's probably the best way to make any Fender Bass sound better. Love it!lord_verminaard
Firstly this steam cleaner is multifunctional so can be converted into a handheld device which you can use the different attachments with. I refreshed the carpets and can see quite a difference and when using it on hard floors it leaves a streak free shine. It's easy to maintain as you just need to wash the steam mop pads but an issue i faced was that when you wash the pad, it doesn't seem to be thoroughly cleaned. I would have also liked it if more than just one steam mop pad came with the product. It is powerful in terms of quickly heating up and steaming but I feel that it could be better but for 22.99 you can't fault it. Due to it being refurbished it did come in the original box but the box was quite damaged. The product itself had minor signs of wear just a few marks. One thing to be careful of is when removing the floor head is to do it slowly and cautiously as it may lead to damage or injury. I also received a discount code to use on my next order with direct vacuums which was: EBAY5 in order to use this code you have to go to the actual direct vacuums website.adeelog
So you'll have noticed that reviewers of this bridge are divided as to whether it improves sustain – I can confirm it definitely does! I recently bought a Squier VM 70s Jazz Bass which sounds great but had a slightly flubby lack of response on the E and A strings. This bridge was a super-easy to fit (and I am REALLY bad at practical stuff), string spacing was pretty much spot on and I had the action and intonation acceptably sorted within 20 minutes. The difference in response and sustain isn't night and day – it won't make a budget bass sing like a Custom Shop bass – but it is very noticeable and takes a lot of effort out of my playing. Recommended.
11. Seymour Duncan 5 String Quarter Pound P-Bass Pickup
Product Details:
Application our most popular basslines pickup. high output, versatile, pickup. recommended for blues, classic rock, punk, heavy rock, classic metal and nu-metal. description the quarter-inch diameter pole pieces expand the magnetic field and extend the frequency ranges for fat, full, punchy sound with tremendous mid-range presence and maximum output. though often used for heavy rock tones, this pickup gives amazing tonal versatility to a single pickup instrument making this the most popular basslines pickup. includes logo covers. complete setup often used together with stc-3m3 and -3m4 tone circuits for optimal tonal control. players mark hoppus / blink 182, ian grushka / new found glory, anthony celestino / box car racer, jay bentley / bad religion, melissa auf der maur / smashing pumpkins & hole, steve harris / iron maidenapplication: our most popular basslines pickup. high output, versatile, pickup. recommended for blues, classic rock, punk, heavy rock, classic metal and nu-me.
Specifications:
Product Dimensions | 1 x 1 x 1 inches |
Is Discontinued By Manufacturer | No |
Color Name | Black |
Reviews:
I replaced pickups in my old Madeira bass. They were thin-sounding, weak and I think there was some short. After 35 years, I used my gift card and treated myself to these pickups. I wired them myself, tested them out, and was floored. Nice, powerful sound, strong tone and more harmonics. There are no negatives with this product. I would strongly recommend this to anyone looking for tone improvement.James
I have Fender P bass, no surprise there. This pickup really shines with distortion, overdrive, and fuzz through my tube amps. The dynamic range and tone of this pickup really shows up with all my overdrive pedals, etc. I notice this pickup pushes my amp more than the Seymour Duncan Quarter Pound pickups I have in another P bass of mine. The SPB-2 has a more vintage voicing than the very popular Quarter Pound SPB-3. I like the mid and crispness I get with the SPB-2 a bit more than the SPB-3. My only issue (though minor) is with installation, I wish the foam that goes under the pickup pushed the pickup up more. Namely, the foam needs a little more resistance to the mounting screws. I had to use different mounting screws to get my pickup as high as I wanted it. This might be particular to my bass though. Overall, this is pickup is great for heavy/loud music styles: posthardcore, math rock, punk, metal. I don't play mellower music or solid state amps, so I can't tell you if it good for those applications. But I can say that my individual notes were more articulate and filled my space (moved more air) with these pickups. Chords sounded very powerful too.MathRockerChris
If you're looking for that vintage, dark, Fender p-bass tone, this isn't for you. If you want a strong attack, articulate highs and mids with a booming low-end that's loud enough to drown out the drummer, then this is a great option. I installed these in a project bass that I made for aggressive style rock and punk without distortion or much overdrive. After a lot of research, I chose these. I installed them, plugged in, plucked a quick riff, and then turned down the amp. These things are loud and the tone is pure aggression. I'm extremely pleased with this pickup. It delivers as advertised by providing a modern, aggressive tone that has punch and attack with a solid low-end that cuts through the mix.DaveH
12. Fender Player Series Precision Bass Neck, 20 Medium-Jumbo Frets, 9.5" Radius, Maple
Product Details:
Crafted in the ensenada, mexico, manufacturing facility, this genuine fender player series jazz bass guitar neck features a comfortable "modern c" profile and 9.5"- radius fingerboard with 20 medium jumbo frets. the nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. for true fender authenticity, it's also serialized and stamped, with a genuine fender logo headstock decal. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
Fingerboard Radius | 9.5" (241 mm) |
Refinement Fingerboard Radius | Modern |
Fret Size | Medium Jumbo |
Neck Material | Maple |
Refinement Neck Material | Maple |
Neck Shape | Modern "C" |
Refinement Neck Shape | C Shape |
Number of Frets | 20 |
Nut Material | Synthetic Bone |
Scale Length | 34" (86.36 cm) |
Neck Mounting | 4-Bolt |
Tuner Mounting Config | 4-Screw Mount |
Instrument Type | Precision Bass |
Peg Hole Diameter | 734” (18.64 mm) |
Headstock Thickness | 540” (13.71 mm) |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
13. Hofner Shorty Electric Bass Black
Product Details:
The shorty bass offers the same classic warm hofner bass tone with a single hofner humbucker bridge pickup. it offers full scale length combined with such small overall dimensions that it can be taken anywhere. other features include a basswood body with a bolt-on maple neck, a rosewood fingerboard with dot inlays, and a fixed metal tailpiece/bridge. available in black. one piece bolt-on maple neck. dot inlays. 24 frets. metal fixed tailpiece/bridge. single nickel tuners. pearl tuner buttons. fixed tailpiece/bridge. plastic nut. hofner humbucker bridge pickup. black chrome potentiometer knobs. includes gig bag.
Specifications:
Shape | Shorty |
Wood Top | Basswood |
Wood Back | Basswood |
Construction | One Piece |
Headstock Shape | Shorty |
Logo and Artwork | Script On Trussrod Cover |
Neck Joint | Bolt On |
Joint At | 18th Fret |
Thickness Neck + FB At 1st Fret | 21mm |
Thickness Neck + FB Near Heel | 25mm |
Scale | 30"/76cm |
Nut Width | 42mm |
Width At 12th Fret | 54mm |
Number Of Frets | 24 |
Tuners | Single Nickel |
Tuner Buttons | Pearl |
Tailpiece | Fixed Tailpiece/Bridge |
Nut Material | Plastic |
Pickup Bridge | Hofner Humbucker |
Potentiometer Knobs | Black Chrome |
Strings | Hofner Round Wound |
Action Bass String at 12th Fret | 3mm |
Action Treble String at 12th Fret | 2mm |
Reviews:
Just took delivery of a used Hofner shorty bass in black. Lovely instrument. Fit and finish was fine. I had to do a little bit of intonation setting which took no time. The neck is better than expected. Frets are finished properly and the neck has a nice satin finish. Its not to wide, not too thick and feels great. The pickup delivers and even sound across the strings. There are no dead spots. Volume and tone controls work great and the knurled knobs feel very good. I was able to dial in some of my preferred sounds using the VPF control on my Markbass Blackline 250 going through a Markbass NY604 cabinet. I was also liking the sounds going through an Eden World Tour preamp. Im looking forward to rehearsal tomorrow using the Eden directly into an EV ZLX 12 powered cabinet. The bass came professionally packed and really appeared to be new. Love the padded Hofner gig bad with the logo on it. All in all a great small, inexpensive (but not cheap) bass for practice, performance and especially travel.Miguel404
First of all, this bass is just what I wanted for practicing when traveling. Compact, 24 frets, decent electronics and comes with a gig bag. Intonation was pretty good too. I did adjust the intonation, but that's really only because I'm kind of fussy about intonation. One thing I will say is I had never experienced "neck dive" until I owned this bass like. in the resting position, the bass headstock will point right down to 5 o'clock. Since this is a practice instrument, I made some modifications. I put weight in the body cavity, but the body cavity is not huge, so with extra weight, I could get the neck to hang in the resting position at about 3 o'clock. I next removed the front strap pin and drilled a 3/8" in diameter hole 2" into the body at the same angle as the strap pin screw. I purchased 3/8" aluminum round stock and cut it to 7.5". 2" would insert into the body and 5.5" would remain outside to mount the strap button while extending out to nearly the 12th fret. I painted the round stock black (primer and paint). I mounted (drilled and epoxied) the strap button on the end of the round stock. I think epoxied the extender into the body. It looks pretty darned good and now the bass balances perfectly.Kevin1014
I have to say I’m so impressed with my new Hofner Shorty ct Bass. I’m used to gigging for years with Monster weighted P basses so the Shorty is such a relief. …. Like Air. Because body is so small it does allow this neck dip everyone cites but with a strap and playing on stage it’s not a problem. The quality and finish is flawless and was Lucy to get a Rosewood neck on mine not one of those horrible Jotoba Cites ones (Though fully understand we have to save planet somehow). The guitar sounds like any Bass circa £300-£500 bass and means you can leave your Musicman and Fenders at home in Studio. Great for touring Bassists who just want easy gigging experience. Well done Hofner!
14. Taot Wiring Kit – Fender Precision Bass P-Bass – Orange Drop Cap
Product Details:
Deluxe wiring kit for fender usa precision bass all parts in the kit are extremely durable high quality parts sized for usa manufactured fender's upgrade your components and hear the difference for years to come. note! – unfortunately, these parts are not compatible with import guitars using metric sizing.
Specifications:
15. Fender Deluxe Bass Tuners Tapered
Product Details:
This item was returned in mint condition. it is free of any performance issues, and has no scratches, blemishes, or other cosmetic flaws. set of four polished chrome tuning machines for use on most modern precision bass and jazz bass guitars. wider at the top than the bottom, the fluted shafts force the string windings downward and keep them tight, resulting in a sharper and consistent break angle over the nut, creating increased sustain and better tuning stability.
Specifications:
Product Dimensions | 1 x 1 x 1 inches |
Country of Origin | Korea, Republic of |
Is Discontinued By Manufacturer | No |
Back Material | Basswood |
Number of Strings | 4 |
Reviews:
Best Fender tuners yet !rusher98bmw
Light weight great tunersfaesales20142014
Was looking for these Tuners. Got em.mondohondo925
16. Fender American Ultra Precision Bass Rosewood Fingerboard Mocha Burst
Product Details:
American ultra is our most advanced series of guitars and basses for discerning players who demand the ultimate in precision, performance, and tone. the american ultra precision bass features a unique “modern d” neck profile with ultra rolled fingerboard edges for hours of playing comfort, and the tapered neck heel allows easy access to the highest register. a speedy 10”-14” compound-radius fingerboard with 21 medium-jumbo frets means effortless action, while the ultra noiseless vintage pickups and advanced wiring options provide endless tonal possibilities – without hum. the sculpted rear body contours are as beautiful as they are functional. this versatile, state-of-the-art instrument will inspire you to push your playing to new heights. other features include “f”-stamped lightweight vintage-paddle tuning machines with tapered shafts, chrome hardware, and a bone nut. includes premium molded hardshell case. all our basses are professionally set up to fender specifications, ensuring the highest quality of each instrument is measured and ready for you to enjoy playing!
Specifications:
Body Finish | Gloss Polyurethane |
Control Knobs | Knurled Flat-Top |
Fingerboard | Rosewood |
Hardware Finish | Nickel/Chrome |
Neck Finish | Satin Urethane with Gloss Urethane Headstock Face |
Pickguard | 3-Ply Mint Green |
Position Inlays | White Pearloid Dot – 7mm |
Body Shape | Precision Bass |
Neck Material | Maple |
Neck Shape | Modern "D" |
Scale Length | 34" (86.36 cm) |
Fingerboard Radius | 10" to 14" Compound Radius (254 mm to 355.6 mm) |
Number of Frets | 21 |
Fret Size | Medium Jumbo |
String Nut | Bone |
Nut Width | 1.625" (41.3 mm) |
Truss Rod | Bi-Flex |
Bridge Pickup | Ultra Noiseless Vintage Jazz Bass |
Neck Pickup | Ultra Precision Bass |
Pickup Configuration | PJ |
Bridge | 4-Saddle HiMass (Toploaded) |
Case/Gig Bag | Elite Molded Case |
Reviews:
I am absolutely loving this bass. I am a guitar player who wanted a bass for recording. I had been using a Squier bass but wasn't satisified. It just didn't sound and feel like Fender Precision Basses I'd played in the past. Decided to pull the trigger on this, and am so glad I did. It is significantly heavier and just feels much more solid. The fingerboard is fabulous. The back of the neck is so smooth and comfortable to play. The frets are perfect. Hardware so much better overall. Tuners much more solid…less tuning issues. And the sound is exactly what I was going for. It sits in my mixes so much better than the Squier bass was. And it is beautiful on top of everything. Can't recommend this bass enough.William
I purchased the Dakota Red Vintera Precision bass because I have been looking for that vintage feel and sound without having to mortgage the house. I wish I could afford a true vintage '58 Precision Bass, but the Vintera does not leave me disappointed. The first thing you will notice is it's beefy neck. If you are looking for a slim modern neck, this isn't it. It is the vintage "C" style neck with a wider fretboard which feels really good to me IMO. The gold aluminum pick guard really stands out next to the red of the body. The craftsmanship and finish is excellent; no fret sprouts or blemishes in the finish. The electronics are excellent with no buzz or crackle and the pups definitely have that vintage sound, particularly when the tone is rolled all the way off; you can definitely channel your inner James Jamerson and Duck Dunn. If you roll the tone back up it nicely brightens things up. I did have my luthier complete a set-up on it and I did change the stock strings with La Bella flats to further provide that old school sound. If you are looking for a bright modern sound then you may want to check out the Vintera Jazz basses. I play the bass through a Fender Rumble which allows this bass to sound it's best. Lastly, the tuners do their job well and provide stable tuning. This is an excellent bass and I have no reservation with recommending it if you want the old school feel and sound. C'mon, you know you want it!!C. Inman
I've been a Precision Bass player since I started playing bass years ago. This is my first "real" Fender bass however, after playing several different Squier basses over the years. While Squier makes great instruments at a fair price point, this Vintera Precision is like a different world compared to my previous basses. You can feel the overall quality of the parts, the fit & finish, and the materials just by picking up the bass and playing around on it. I received it in the mail almost perfectly set up by Music Store. Only the action was too high for me, but that was an easy adjustment. The bass has a wide, not too thin neck profile that is not very deep. Super comfortable to play. The nut width is slightly larger than on other modern P-Basses which is nice if you like the extra space. I really like the way this forces you to play a little bit different compared to a narrower fretboard, like for example on a Jazz Bass. The difference compared to a regular P-Bass is pretty small. You just get a feeling of more space for fretting. The fretboard radius is also a bit smaller than on a modern P-Bass. This makes for a very balanced playing feel in my opinion. These differences are all nice touches and make for a slightly different playing feel, but don't make it any harder to play than a regular P-Bass. The sound is absolutely wonderful. The 50s-style pickups have a slightly compressed sound that sound great on its own, plugged directly into a DI box or an interface. I replaced the factory set of strings with .045-.105 LaBella flatwounds which is a perfect fit for this pass. The low-mids are greatly enhanced by putting a set of flats on this bass. It sits beautifully in the mix and is never weak or overpowering – always perfectly balanced. The fit and finish of this bass is great. I'm not one to go looking for faults in the paint or anything like that, but I absolutely have not spotted any quality control issues with my bass. The hardware is absolutely fine and does the job. You don't get a massive bridge or fancy hardware here, because everything is done to vintage specs. You can, of course, modify these parts later on, but I really don't think that's in the spirit of this vintage-focused instrument. If you want to put a more massive bridge on the bass and modify it in other ways, I would choose a Fender Player Series P-Bass instead which is a bit cheaper – you can spend the difference on your mod parts. The bass is surprisingly light. If you have back issues or generally dislike heavy instruments, I would definitely recommend this one! The lack of weight does not impact the sound quality at all. The only drawback is that, in some positions, it can have a little bit of neck dive, not to a point where it really becomes a problem, however. I always wear a strap even when sitting down, and that takes care of the very slight neck dive very easily. One thing to keep in mind is that the hardware, specifically the bridge and trussrod, are truly built to vintage spec. This means that the string height adjusters on the bridge do not have tiny hexagonal screws but small slotted screws instead. You will need a very small slotted screwdriver to access these screws. The trussrod can only be adjusted at the base of the neck which can be annoying. You need to remove the neck in order to adjust the trussrod. Here, again, there is no hexagonal screw but rather a large philipps screw to adjust. Small minus points for these features that could have been left out in favor of more modern solutions. I guess the placement and types of screws used make it more true to the vintage specs, but I would much prefer if they had just chosen the modern versions instead. Overall, this is a very beautiful and great-sounding bass that I can only recommend if you like P-Basses, vintage sound, and flatwounds. The build quality is fantastic and I have no doubt that this bass will stay in great shape for a long, long time.
17. Cts 500k-500k Concentric Audio Pot
Product Details:
Two potentiometers in one for you fender jazz basstelecaster designed by cts! stacked design allows you to have two volumes, or two tones or a volume and a tone combination in one mounting hole !. attention! the top / volume section is 500k and the bottom / tone section is 500k 3/8 "mounting hole. top shaft is 3/16 "(4.75mm) diameter and bottom shaft is 17/64" (6.75mm) diameter. supplied with two nuts and one lock washer. made in usa ! two potentiometers in one for you fender jazz basstelecaster designed by cts! stacked design allows you to have two volumes, or two tones or a volume and a tone combination in one mounting hole !. attention! the top / volume section is 500k and the bottom / tone section is 500k 3/8 "mounting hole. top shaft is 3/16 "(4.75mm) diameter and bottom shaft is 17/64" (6.75mm) diameter. supplied with two nuts and one lock washer. made in usa !
Specifications:
Reviews:
Quick delivery and the product was in excellent condition, Thanks.adrian-n-business
i have not installed it in for my guitar MOD but over all it is a good value that is why i bought it….e :- )1973361
18. Fender Jazz Bass Alder Body Brown Sunburst
Product Details:
This is the exact body you'll receive! weight – 4lbs 13.6oz crafted at our ensenada, mexico, manufacturing facility, this genuine fender jazz bass guitar body is routed for a traditional ss pickup configuration is pre-drilled with five screw holes for vintage-style bridge mounting. it's topped with a gloss polyester finish for added durability on any stage. this replacement body is for a fender or squier by fender guitar.
Specifications:
Reviews:
Fine product well made. Should have purchased sooner. I highly recommend.Xxander31
Called, got a deal on what I wanted. Great experience!OHAD
It went right on looks great sounds greatraymondisho_0
19. Hipshot 5a400as/750 Satin
Product Details:
Hipshot 4-string a style aluminum bass bridge – satin.750" string spacingsince its inception in 1999, the hipshot a style bass bridge has become the standard bearer for high end instruments and boutique builds. precision machined from durable top-grade aluminum and featuring a fully adjustable groove-locking saddle design, the a style bridge offers the best in playability and no-buzz tone transference with a sleek, modern look. – innovative micro-adjust saddle design allows for an additional 1.5mm of side-to-side adjustment for even greater string spacing possibilities – cnc machined from aircraft grade aluminum for airy and brilliant highs – accommodates both string-thru body and top load bridge designs – quick load slots make string changes easy and prevent damage to your bass – manufactured and distributed by hipshot#5a400as-750
Specifications:
Finish | Satin |
Made In | United States |
Reviews:
I love everything about this bridge except for the provided mounting screws which shattered. the tips of the screws broke off in the body of the bass. Maybe a higher quality of mounting screw should be provided with the bridge. These seem to have been aluminum screws. a material too soft for the function.joffess17
I have 2 Fender P-Basses, one of those I installed a Leo Quan BA II on and the second had the cheap bent metal bridge supplied by Fender. I service and repair quiet a few guitars and basses. The Leo Quan BA II made such a BIG difference in sound quality (sustain, tone) in my first P-Bass that I decided to replace the stock bridge on my second p-bass. I surfed the net and found the BA II but MusiciansFriend had the Hip-Shot with a 20% discount. Not having used a Hip-Shot bass bridge before, I decided to give it a try and save a few coins. Bad Idea. First Problem (bad design), Hip-Shot comes with only 3 mounting holes instead of stock 5 AND you have to remove the 2 inner saddles prior to installation so you can get the center mounting screw in flush. You don't have to do that with the BA II since it is has room to install without removing saddles first. Second Problem (bad design for intonation adjustment), Hip-Shot saddles do not have the straight thru the saddle screw hole adjustment which will allow you to adjust the saddle all the way back to the end of the bridge if needed when setting intonation. The Hip-Shot saddles only allows you to adjust to mid-way thru the saddle then stops. They are not threaded all the way thru so they include an additional couple of shorter saddle screws to adjust the saddle back closer to the end of the bridge. If you adjust it all the way back, even after installing the shortest screws in the saddles (again having to remove the saddles and put shorter screws in), you are limited on how far you can adjust them due to the saddle slot taper. I could not get the E string intonation adjustment "dead-on" due to the limitation. Do yourself a favor and spend a few extra coins and get a BA II. This is my first and last Hip-Shot. Very disappointed. Go with what you know. BA II bridges are head and shoulders above the badly designed Hip-shot bridge. The tone and sustain is exceptional with the a Leo Quan BA II unlike the Hip-Shot.thecapmasta
This bridge is a solid, massive component. My Hipshot is chrome plated brass and is fantastic upgrade to the standard Fender bridge of my '78 Precision. Installation is easy. The bridge saddles come bottomed out on the base, so a string height and intonation setup will be required. Note: The bridge comes with two additional intonation adjustment screws which are approximately 0.25" shorter than the screws originally installed on the bridge saddles. User may need to swap out intonation adjustment screws on one or two saddles if more string length is required during intonation. Overall, the bridge looks great, sound is full and rich, sustain has improved.kclloyd
20. Vintage Bass V4mrssb Distressed Finish, Sunset Sunburst
Product Details:
The vintage v4mrssb icon bass replicates the beautiful, worn-in look and feel of an instrument that exhibits a lifetime's worth of woodshedding, rehearsing and performing, straight out of the box. good things come to those who wait but who has the time for that? featuring a single wilkinson bp(m)wbp pickup, compensated brass saddle bridge and improved upper fret access, the vintage v4mrssb is true players instrument thats ready to turn its hand to any number of musical styles. a vintage icon series bass already looks like your lifetime companion; the best part is your journey is just beginning. play on.
Specifications:
Reviews:
Best "budget" guitar I've ever played. Much better than my Epiphone SGConscious Robot
Excellent service and price.David H
Related posts:
- Guitar Amp Repair Books For Sale (2024 Update)
- Guitar Pioneer Paul Crossword Clue For Sale (2024 Update)
- Jerry Only Bass Guitar For Sale (2024 Update)
- Guitar Amp Repair Boston For Sale (2024 Update)
- Guitar Hero Drum Pedal Replacement For Sale (2024 Update)
- Guitar Neck Cnc Files For Sale (2024 Update)
- Guitar Pedal Power Supplies For Sale (2024 Update)
- Martin Build Your Own Guitar Kit For Sale (2024 Update)
- Martin Grand Auditorium Guitar For Sale (2023 Update)
- Martin Guitar Polishing Cloth For Sale (2024 Update)