Chinese Martin Guitar Copies For Sale (Jan 2023 Update)

I really liked this little guitar, BUT…I read the reviews and decided to buy in-store so I could play the guitar before buying, and I'm SO glad I did. I went into my local Guitar Center and played THREE of these Martin LX1E guitars, including one that had been specially unboxed so I could try it after two others failed my examination. All three guitars had a very pronounced buzz in the frets. It was not that noticeable when I played them acoustically, but the buzz was very noticeable when I plugged them in to an amp. I even tested the amp with other guitars, to make sure it wasn't the amp. It wasn't. Its a great little guitar, great tone and very playable, BUT my advice would be not to buy this one on-line. Play it first. Play up and down the whole fretboard, and plug it into an amplifier and play again. I have been playing for more than fifty years and have never experienced playing three brand new Martins that were simply not up to snuff. Weird!Tele Playr

The guitar itself can have five stars. Nothing wrong with it. The problem I have is that it is not the old LX1E lefty that Martin used to make and I used to own. It is advertised incorrectly here as containing the Fishman I-sys electronics that contained a volume, base/treble controls and a phasing button for feedback. It also no longer contains the tuner. This is basically the LX1 Little Martin with a Sonitone pickup under the bridge and tone/volume control in the sound hole, which I despise. I prefer the old version where the tuner and controls were on top side (as shown in the picture variety). This needs to be updated!!! I now have no tuner on this guitar when I fully expected one. I would recommend the Little Martin guitar but it needs to be advertised correctly.Jules

I bought this guitar for my son so he can have a smaller guitar to lug around in school. We were surprised when we received the product that the pickup that was installed is a Sonitone pickup instead of what's advertised – an Isys T preamp. The Isys preamp has a tuner, phase and tone control whereas the Sonitone is built into the sound hole and only has the volume and tone control. I brought this up with customer support saying I only wanted the product that I thought we were buying. I received excuses and a repeated offer to return the guitar. We chose to keep it because we need it and like the Martin sound. However MF does not stand up to what they advertise and could not provide a reasonable explanation why the product was switched. Even as I write this review, the description still says it has the Isys pickup. Good luck to future buyers and know that you are buying a different product.Pasigenyo

Was the next best thing that I have ever got myself other than my truck. Ty love the way it sound and the way it plays……rosad-rober

For the money, I couldn't find a better acoustic guitar (A new one anyways). I've owned many high end Martins, but I wanted something that was easy to travel with and I wouldn't worry about if it got scratched/dented. Out of the box the action and intonation were very close to perfect. I adjusted the truss rod myself to fit my playing preference, and the intonation was so close I doubt anyone will notice when playing further up the neck. The building materials are not great, but once again, "for the money"… My only con is they don't have a hard shell case for this particular model. The included soft shell case is still convenient, but I kind of wish they'd make a HSC like they did for the dreadnaught model.Garrett G.

This guitar is good for the money. Neck straight. All workmanship is precise. Light and not overly heavy from clear coat gunk. Neck is short but wide. Strings that came on it went in trash in 5 min. Use Lixrs on these small guitars. Nuff said…Not too small like Martin mini where you fight it not to be a uke and it really is. Quality is near perfect. Case is the good one like the minis. Doesnt feel like a GS mini which feels too small. This guitar feels good but smaller that normal. Set up fine out of box (which is more than I can say for the USA models). Ready to play. I will prob change out stock pickup for DTar syemour duncan wavelength solo later. Not that the stock pickup is bad; just like seymour better for acoustic under saddle "non-quack" pickup. If you know how to use an eq then dnot need that extra tone button anyway, plus fihsman is kind of not great stuff. After about 10yrs needed something better. Buy one before Martin decides not to make them anymore…Kokbloock

I am a singer, songwriter, church musician, and quartet member. I have been playing and singing for over 60 years. own more than a few guitars. Most are Martins. I was looking for a smaller, lighter, easy to transport acoustic to use in my street ministry. This one caught my attention and since it was a Martin, I expected it to be a quality instrument. I am not disappointed. I've owned several Mexican made Martins over the last few years finding most to be well made, quality instruments. I have to say that this is probably the best one so far. Fit and finish is comparable to the lower priced US made models. That is to say, very good. Sound and playability is very good. The strings on this instrument are well matched for a balanced sound from bass to treble. The bass is not quite as deep and booming as a full sized dreadnought but still strong. Highs are crisp and clear. Scale is a little shorter than a full sized guitar but due to the 1.75" nut width, it doesn't feel cramped. It chords well up and down the neck and intonation is near perfect. Great for finger picking, too. The action could be a little bit lower for me but plays great right out of the box. I am very happy with this instrument and would definitely recommend it to anyone looking for a slightly smaller body size in an affordable Quality guitar. And it is a Martin 😊Thomas

I was looking for a beginner guitar for my grown but petite daughter that would fit her as well as give her a great start. I let her try several and she liked the feel and the looks of the Martin DJR-10E in Sapele the best. I liked the sound and the fact that I could depend on Martin Quality. It's been about a month now and neither of us has been disappointed. It's an easy to play and great sounding guitar, which makes her want to pick it up and play. We're both very well pleased with it.JIM

Bought for studio work. Smokes! Guitar's natural eq is a perfect hi/lo cut for a mix with a nice mid presence. Very balanced with everything you need and nothing you don't. Wanted for more finger-style tracking. Have several other usual-suspect woods/brands/models but missing something in this 'space'/role. Was a perfect fit!.Daniel

What is neat about these guitars is that the Special Martins are the specification of Martin CEO Chris Martin. He did an extremely nice job on the configuration, balancing standard bracing, rose tone wood, and the VTS adirondack top. The combination provides this guitar with a fantastic full spread of frequencies, separation of string tones, and the stability of standard bracing, which allows for the guitar's even responsiveness providing clarity at all volumes. Put this guitar in a nice sounding room with a good (not excellent) microphone and I cannot imagine a better way to record. If you can sing over this guitar, you will have to strain. The ability to hold tune always amazes me about Martin guitars and this guitar is no different. It is a great deal at full price, but I got mine at $1K off because someone thankfully brought it back. A sturdy plastic shelled case exactly fits the guitar. A part of me hopes they stop making this configuration so the value goes up, but then again, it should be played and mine will just go to one of my children who will enjoy it as I have.Grace

This guitar looks and sounds amazing. The action comes a bit high as all Martin dreadnoughts do. If you like that, you're good to go. If like a lot of people you want a lower action, have a luthier carve a new saddle for you like I did and keep the old saddle just in case as a backup. With the new saddle this guitar plays perfectly. I'll most likely use the lower saddle for fingerpicking and the old saddle if I'm strumming loud chords. Didn't need to adjust anything else but the saddle. The neck and nut were perfectly in spec already. I had my luthier file down some sharp corners on the fingerboard side of the nut and now it's even more comfortable to play. One thing that I've always found disappointing about Martin guitars is the plastic bridge pins. So I went ahead and ordered a set of liquid metal pins made by Martin. I really like the look of the new pans and I do think they add volume and a bit of sustain. I've tried some different strings on this guitar with differing results. Not sure exactly which strings that came with but those sounded only OK. They were kind of old though. I put a set of light gauge elixir nanoweb 8020 bronze and those sounded better but I wasn't satisfied until I tried some Tony Rice signature medium gauge strings and that was the sound I've been looking for. they really allow the guitar to sing and have a very woody and warm tone. whatever type of string you use I would definitely recommend medium 13 to 56 gauge for maximum tone. Don't go any heavier than that. Over all I am very pleased with this instrument, especially with the modifications I mentioned above.Nick B

First off, given the pandemic, I bought both this and an 000-28EC to compare. I babied and played them both for nearly 30 days before I ended up returning this (in mint condition) and keeping the EC. Tough decision, but it was mostly due to the neck and ergonomics of the EC that fit my shoulder better. But there is not a day that goes by that I don't think about this fantastic dread. The Engelmann spruce has an awesome bearclaw to it, and has a 3D effect/depth to it that is hard to describe and even harder to capture in photos, but you can really appreciate it in person. It makes the guitar unique and I really liked it. Apparently Bearclaw Engelmann is also quite rare. The tone out of this thing was amazing, very loud and shimmery with lots of overtones, maybe a little brighter than other HD-35s I played. Very bass-heavy, and held up to heavy strumming without issue. Fingerpicking was also nice, but EC was better for that. The upgrades to this are the bearclaw top and polished head plate with the fancy Martin script, which does help set it apart, but for the price, I wish it had wood binding or at least grained ivoroid. Ultimately, I couldn't bond with the size, MLO neck, or the plastic binding. But if these are non-issues for you, this is a very choice guitar. I will say that the Custom Shop did a great job with symmetry of the bearclaw top, and they picked out some real nice pieces of rosewood for the back and sides as well. Action was good from the factory. For this price, I wish it came with a better case than the green felt thermoplastic, which had a tendency to tip over or try to close onto the guitar. If you're in the market for a one-of-a-kind HD-35, give this model some serious consideration. Absolutely fantastic instrument.Paul

Overall: I've been playing guitar a long time, both electric and acoustic. This is my first Martin and first American made instrument. Bottom line – it's awesome, and the American quality is very apparent. I had a lower end acoustic which I actually loved, but was on the hunt for an acoustic-electric. After getting frustrated with lower priced overseas instruments, I finally said "that's it! I'm getting a Martin." I still didn't want to spend $2.5-$4k though, but wanted an American made Martin with included electronics. This one fit the bill.My one concern was whether this guitar would still sound good, loud, and have enough bass given the shallower depth. I actually had the opportunity to play the D-16E side-by-side with a "Martin Special 16 Style" (which is exclusive to a competitor store). That instrument is a full depth dreadnought but otherwise very similar. Without much scientific evidence, I would say the D-16E sounded better. It may have been a little quieter, but I felt it had a more balanced sound and less boom. 90% of the time, I play my guitar on recordings in multi-instrument arrangements and have to cut the low end anyway. Even still, played solo, it sounds amazing and I think it has plenty of volume and bass.I'm a perfectionist when it comes to intonation and setup. This thing was absolutely perfect out of the box. I checked intonation, action, string height at the nut, neck relief – I absolutely do not need to take it in for an initial setup. The frets are also nice and smooth at the edges of the fingerboard. I initially thought I didn't like the vintage style open gear tuners, but I actually love the way they operate – they are very smooth and accurate. And I think they look very classy too.As far as appearance I think it is absolutely beautiful. I love the simplicity of it. I like the satin finish on the back and sides and the gloss top. The top wood grain on mine looks great. Just enough pattern to add some character without a lot of bold striping. I chose the mahogany one for a few reasons – 1) it was a little cheaper, 2) I listened to some comparisons and although the mahogany vs. rosewood were very, very similar, I thought the mahogany sounded a little better, and 3) the mahogany I think is even simpler looking than the rosewood, which I like. The mahogany D-16 is more like a D-18, where the rosewood D-16 is more like a D-28. I thought the binding was black, but was pleasantly surprised to see it's actually a beautiful dark tortoise shell.The only thing I would be a little critical on for this guitar is the electronics. The single tone knob adjusts from flat EQ to "scooped" EQ. To me, both of these settings have too much mid and high end. I would like separate bass, mid (preferably sweepable), and treble controls. And the enhance does make it sound a bit more natural, but it really doesn't affect the sound that much. I think they should've gone simpler and just left off the tone knob and enhance knob. They could've preset some enhance from the soundboard pickup and then let the user EQ it to their liking with a DI or amp, since that needs to be done anyway. However, I think a lot of acoustic-electrics plugged in directly suffer from similar issues (except maybe for ones equipped with something like the L.R. Baggs Anthem). I did get a pretty good sound plugged in after adding some EQ in my DAW and a little reverb. Likewise, if I were to plug in for live performance, adding a DI box or an amp with EQ controls would help immensely.On the plus side for the electronics, I do like that the controls are somewhat hidden in the sound hole. I also like that the output jack is separate from the button. I had another acoustic-electric with the output jack in the strap button, and I needed a special adapter to get any of my several straps to hook onto it securely. And it's nice to have the battery accessible from outside the guitar. Systems like the L.R. Baggs Anthem require a battery bag velcroed inside the instrument which requires string removal (or extreme loosening) to change.Jason

I bought this beauty about a month ago at Sam Ash. I visited three or four times and spent several hours playing different acoustic electrics in their acoustic room before I decided on this guitar. Not only is it easy on the eyes, but it sounds so good especially amplified. It has a great tone and really nice low end. At first I had some buyers remorse, but now that I've played it through multiple amps and have used it to record, I'm confident I made the right choice.JW

Finally got a Martin made in Nazareth, PA. The reviews were right on down to the smell of wood the first time you opened the case. Sounds sweet unplugged. The feel of the neck and the action couldn't be better. Not as loud as a full bodied dreadnought as expected. When I plugged it in my Fishman Loud Box Artist, I was blown away. It made me hear what this amp was really made for. But here's the problem. After a few minutes of strumming the guitar and enjoying the sound, the 1E string rolled off the edge of the fret. I ignored it and kept playing because the sound was so good. But then it happened again in less than 20 minutes of playing. Both times happened on the third fret so I looked at it closely. I pressed the string and lightly pushed it down and it easily rolled off the edge. I've been a guitar player for well over 40 years and the last time I had this issue was with a guitar with a badly replaced frets & fretboard. I don't know if this is just a defect on this particular D-16e guitar or the design is just not right for me. Either way I'm not happy with it so I returned it. It used to be when people ask me about Martin guitars, I tell them if it's made in Nazareth, PA you can never go wrong. That's a myth to me now. It may be a one in a million thing, but if you're that guy in a million, it's a world view changing experience. What else do I believe in that's not really true?Roberto

I am a singer, songwriter, church musician, and quartet member. I have been playing and singing for over 60 years. own more than a few guitars. Most are Martins. I was looking for a smaller, lighter, easy to transport acoustic to use in my street ministry. This one caught my attention and since it was a Martin, I expected it to be a quality instrument. I am not disappointed. I've owned several Mexican made Martins over the last few years finding most to be well made, quality instruments. I have to say that this is probably the best one so far. Fit and finish is comparable to the lower priced US made models. That is to say, very good. Sound and playability is very good. The strings on this instrument are well matched for a balanced sound from bass to treble. The bass is not quite as deep and booming as a full sized dreadnought but still strong. Highs are crisp and clear. Scale is a little shorter than a full sized guitar but due to the 1.75" nut width, it doesn't feel cramped. It chords well up and down the neck and intonation is near perfect. Great for finger picking, too. The action could be a little bit lower for me but plays great right out of the box. I am very happy with this instrument and would definitely recommend it to anyone looking for a slightly smaller body size in an affordable Quality guitar. And it is a Martin 😊Thomas

I was looking for a beginner guitar for my grown but petite daughter that would fit her as well as give her a great start. I let her try several and she liked the feel and the looks of the Martin DJR-10E in Sapele the best. I liked the sound and the fact that I could depend on Martin Quality. It's been about a month now and neither of us has been disappointed. It's an easy to play and great sounding guitar, which makes her want to pick it up and play. We're both very well pleased with it.JIM

Like others, I've always wanted a domestically crafted Martin but just couldn't fit it in the budget. I'm sure the X series are great instruments but I did not want to settle for something other than a solid wood US made Martin if I were to purchase one. The MF sale and their 48 month, 0% financing deal made the choice a no brainer. I would consider myself an experienced novice in that I've been noodling on acoustics for 35 years give or take but electric bass has been my instrument of choice. That said I find this guitar easy and a joy to play and keeps me wanting to come back to it. The sound is bright and pleasant even when getting into the strings some. The quality is top notch and I went over this thing with a fine tooth comb. The absolute, only "flaw" I could find was that the pick guard was off center perhaps be .5 mm or so and the only way one would notice is if you follow the very minimal rosette around the sound hole you can gauge the position of the pick guard by following the thin white center line. There is no way you would notice this unless your eye is within 15 or so inches of the sound hole. The tuners seem decent quality, are marked "Martin", adjust smoothly and hold tune very well. The neck is comfortable and intonation is perfect as one would expect with the use of their PLEK machine to aid set up. To top things off the hard shell case fits the guitar perfectly, looks great and seems to be high quality. There is really no downside to this guitar and I wouldn't hesitate to advise anyone to purchase this guitar.Josh

I've had mine for four months, so I feel that I can make an honest evaluation and I'm every bit as impressed as I was on day one. I'm primarily an electric player, but I owned a couple of mid-range acoustics when I got this. I've since sold them because I knew I would never play them again. After steak, hot dogs just don't cut it. I always thought Martins were rather plain looking and still do, but what makes them so impressive is the playability and unequalled tone. The Custom D ranks right up there with the best in those categories. The satin finish is nice and while it may be psychological, I think it may give it a more open sound. You can definitely feel a ton of vibration in your body when playing. It doesn't show fingerprints or require polish either. In fact, Martin doesn't recommend polish. The factory installed strings are of the highest quality and great for chording, but if you use the entire fretboard or do a lot of bends like I do, you may want to consider something lighter. I changed to coated 10-47 extra lights and was surprised to find little to no loss in the low end. Now that I'm a Martin fan, I've considered trading up, but I just can't justify the extra cost for binding and a gloss finish. I'm sure the cork sniffers will tell me there's a whole lot more to it than that, but I think they would be hard pressed to distinguish a difference between this and a higher end model listening blindfolded. I've been playing for 48 years and have bought and sold many guitars during that span (regretting a few), and the Custom D is one of the best guitar purchases I've ever made. Oh yeah, everyone comments on the smell and it's no exaggeration. Hits you as soon as you open the case.Terry T

I wasn't expecting a whole lot with this guitar. I just wanted a guitar that I could take out in the elements and not have to worry about it. I also have a Taylor 314ce and Martin 000-15. This guitar is super comfortable to play, it's solidly built, and it sounds like a Martin! I tried the Taylor 114 first and it felt and sounded a bit cheap. This one is so much better than the Taylor 114. It has sustain for days (sure wasn't expecting that)! The 1.75" nut width and 24.9 length make it perfect for me. The fretboard is also superb, the richlite feels like ebony (super smooth), and the fretwork is spot on!EC

dream come true!! this guitar is amazing, set up out of the box perfect, only thing is sharp fret edges on the bottom of the neck.Sounds amazing and you know its a Martin when you hear it.very impressed with this guitarEric

I would of preferred to buy a solid top Martin for my son but he has an attic bedroom which fluctuates with the heat and we were worried about keeping it stored safely so at his request I brought him this one instead. I had previously seen and held the solid mahogany version and so when this arrived it did look different (not quite as nice) and there was a slight difference it tone and resonance however it still looked and sounded great compared with other guitars around and under the same price range (£500) we had tried. My son is 16 and an intermediate level guitar player and found it comfortable and fun to play and it is a really good sounding guitar (particular at the lower end) especially when amplified. He particularly likes the neck profile of this Martin which is tapered and neither too far or too thin. A good value Martin that should last him years without the worry of the extra care you need to take with solid wood Martins so a good middle ground for us. Would recommend.Mr F. c.

Overall: I'm 62 years old and have been playing for 50 years . Unfortunately I had to stop playing for the last 2 due to wrist pain which was from excessive playing, which needed time to heal and made me sell all of my gear . So last week, I decided it was time to get back into it and decided to just go with acoustic and I have always wanted a Martin but, did not have the big bucks for for a USA made one. So after researching, I decided on this one and am glad that I made the purchase . Even though it's all HPL with a stratabond neck, the tone from this is all 100% Martin .It stays in tune forever and the added gig bag is extremely well made along with being a huge plus . My only gripe was that the action is a bit high but, sanding down the saddle a bit took care of that, and I also ordered a truss wrench from Martin's site as well, so problem solved. The Black Satin Finish is beautiful and means that I won't have to spend any coin on polish or lemon oil for the neck as well , thanks to the stratabond neck. These made in Mexico X series are a great deal for the guitarist like myself who is on a limited budget who has always wanted a Martin.Jeffrey

I love this guitar. Im just a mid-level guitar player on a bit of budget and this has been the perfect guitar for me. I wanted something different and I like that all the hardware is blacked out. It sounds great! Even my girlfriend who is not a musician could tell how nice it sounds. I also like that its made in Mexico and not over seas. The soft carry case is great to with a big pocket for sheet music and a small pocket to hold guitar picks. Musicians Friend was great with delivery and it came right on time in perfect condition. Just be aware that the black finish on the body is a very flat black (it looks more satin or even shiny in a few of the online photos). I recommend this guitar to anybody looking in this price range.joelster1975