C Shaped Guitar Neck For Sale (2024 Update)

There no denying the allure of a roasted maple neck. resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument voice. this genuine fender stratocaster neck is crafted at our ensenada, mexico manufacturing facility. featuring a comfortable modern c shaped profile and 9.5 radius maple fingerboard with 21 narrow tall frets, this neck was designed for pure playability. the synthetic bone nut is pre slotted with pilot grooves for accurate spacing when filing the final string slots. the perfect way to give your stratauthentic fender feel, this replacement neck even sports our famous spaghetti logo on the headstock. this replacement neck is for a fender or squierby fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.

Genuine fender stratocaster guitar maple neck features a comfortable "modern c" profile and 9.5"-radius rosewood or maple fingerboard with 21 medium jumbo frets. also includes standard truss rod and pre-slotted synthetic bone nut. tinted satin urethane fi – fingerboard: maple – number of frets: 21fret size: medium jumbo – neck shape: modern "c"neck material: maple – neck finish: satin urethane on back of neck, gloss on face of headstock – fingerboard radius: 9.5" (241mm)scale length: 25.5" (648mm)nut material: synthetic bone (melamine)nut width: 1.650" (42mm)position inlays: white dot3/16" truss rod adjustment nut (at headstock)6 pre-drilled tuning machine holes with 2-guide pin holes for each tuning machine – each neck is serialized and stamped during quality inspection – walnut "skunk" stripe on back of neck – fender logo with "original contour body" decal

Recently was installed an american special that the neck's frets had been worn down. this neck is a 2020 with minimal fret wear (does have a little, but i would say retains 90 percent of original life). does include tuners.

Allparts srnf-c replacement neck for stratocaster is “officially licensed by fender ” and made to exacting quality standards in japan. offering a modern 10” fingerboard radius, 21 vintage-tall frets, and over-sprayed with a vintage-tinted nitrocellulose finish, our srnf-c model offers a great combination of vintage aesthetics and modern playability. allparts srnf-c 21-fret rosewood strat neck features 21 vintage tall frets .074" x .053" classic c shape maple neck w/ 10" radius rosewood fretboard classic 1-5/8" nut width heel width 2-3/16" vintage tuning peg hole diameter .340" truss rod adjustment at the heel neck thickness .85" at the first fret, .95" at the twelfth fret

Allparts tmnf-v replacement neck for telecaster is “officially licensed by fender ” and made to exacting quality standards in japan. with a soft-v neck shape, vintage 7.25” radius, 21 vintage frets, and a vintage-tinted nitrocellulose top-coat, the tmnf-v is the perfect choice for players craving that vintage look and feel. allparts tmnf-v maple v shape tele neck features 21 vintage frets .079" x .043" soft v-shape, one-piece maple neck with 7.25" radius classic 1-5/8" nut width heel width 2-3/16" nitro-over-poly finish vintage tuning peg hole diameter .340" neck thickness .90" at the first fret, .99" at the twelfth fret

Modern maple neck with rosewood fingerboard 21 tall frets (.079 x .051 inch) sanded, unfinished and ready to spray 9.5 inch radius 25.5 inch scale length nut width 1 and 5/8 inches heel width 2 and 3/16 inches tuning peg hole diameter .340 inch truss rod adjustment at heel neck thickness .86 inch at first fret, .96 at twelfth fret. all necks are made of the highest quality wood in either the united states or japan. no two necks are exactly the same and may differ slightly from what is pictured. this neck is licensed to allparts music corporation by fender musical instruments under a quality control trademark license. all necks may require fret leveling and polish, and may need to be fine tune to fit your instrument. this is normal and not a defect. all necks should be carefully inspected prior to installation and/or modification. all wood is unique with individual growth patters.

Fender licensed replacement neck for strat – #smvf-csolid maplevintage tinted poly finish21 tall modern frets (.079" x .051"), 10" radius1-5/8" nut width, 2-3/16" heel width.340" tuner hole diametertruss rod adjustment at heel.84" thick at 1st fret, .94" thick at 12th fret

Description: official fender player stratocaster neck- tinted maple w/ pau ferro fingerboard- modern "c" shape- 9.5" radius (241 mm)- 22 medium jumbo frets- 25.5" (648 mm) scale length- 1.650" (42 mm) width at nut satin urethane finish on back, gloss urethane finish on front condition: mint year: 2022 serial #: mx22021396 country/make: mexico comments: you are looking at a wonderful mint fender player stratocaster neck- the finest in cutting edge modern features! the frets, fingerboard, headstock and back of the neck are in perfect condition. this neck is also straight w/ truss rod in perfect condition- a fantastic playing fender. buy it today!

Fender licensed replacement neck for tele#tmo-c-modthe tmo-c-mod replacement neck for telecaster is officially licensed by fender and made to exacting quality standards in japan. based on allparts' best-selling tmo-c neck, this "mod" version offers truss rod adjustment at the headstock rather than at the neck heel. offering a modern 10 fingerboard radius and 21 tall frets, this neck offers easy playability and super-smooth string bending. unfinished and ready to spray, you can finish our tmo-c-mod any way you'd like! solid maple, sanded, unfinished and ready to spray! 21 tall frets (.079" x .051"), 10" radius1-5/8" nut width, 2-3/16" heel width.340" tuner hole diametertruss rod adjustment at heel.85" thick at 1st fret, .96" thick at 12th fretlicensed by fender! distributed by allparts

22 fret electric guitar neck canada maple neck fretboard c shaped gloss paint specifica tions: neck: canada maple fingerboard: canada maple frets: 22 color:yellow radius: 12" tuner holes diametre: 10 mm fret size: medium jumbo(2.7mm) heel width: about 55mm paint: gloss note all photos are taken from one of the stock real objects and pictures have not been photoshop processed. please contact me first if you have any questions during and after your purchase. thank you. about the shipping our factory from china , when we send the item to you , by ems normal need1-2 weeks arrive. so when you order it, don't hurry to get the item ,asfrom china to your country need time . about the guitar ,if you need hardcase for this guitar ,you can check ourproduct list to add it .please patiently waitting for your baby come on . about our factory it is china and south korea joint venture,so the pruductquality get control , best price and service for you .as we for morefamous brand do oem guitar . if you want do customized gu

This replacement part is licensed to allparts music corporation by fender musical instruments under a quality control trademark license. allparts music corporation is not affiliated with fender, this is not a fender product and no fender warranty applies. we finish all of our necks by hand here in the usa. we only use the best quality nitrocellulose lacquer. our goal is to provide a beyond custom shop quality part for literally a fraction of the price. we offer custom water slide logo work as well as drilling and tuner installation on every neck we sell. we level, crown dress and micro-polish the frets on every neck we sell. we fit all of our necks with graph tech nuts exclusively for fast low action. we use time tested relic and aging methods to attain the most true to life wear spots. we can get anything you need, if you have a custom order please write us. vintage style rosewood guitar neck. made to fit all strat style guitars relic 100% nitrocellulose finish. (we hand finish these in a thin amber nitrocel

S-style guitar neck

Banana shape electric guitar neck 1 piece

Guitar neck blackstrange shape guitar neck, all black paint abnormity 24 product bidirectional

Description: official fender player stratocaster neck- tinted maple w/ pau ferro fingerboard- modern "c" shape- 9.5" radius (241 mm)- 22 medium jumbo frets- 25.5" (648 mm) scale length- 1.650" (42 mm) width at nut satin urethane finish on back, gloss urethane finish on front condition: mint year: 2022 serial #: mx22054238 country/make: mexico comments: you are looking at a wonderful mint fender player stratocaster neck- the finest in cutting edge modern features! the frets, fingerboard, headstock and back of the neck are in perfect condition. this neck is also straight w/ truss rod in perfect condition- a fantastic playing fender. buy it today!

Up for grabs we have here for sale is a sweet japanese made fernandes neck back from the golden age of japanese engineering. fernandes has been on the forefront since the very beginning and it s easy to see why!this particular neck exhibits minor wear just front general usage over the years and that includes minor fret wear, some checking to the lacquer on the fret board, some dings and dents and this rather ugly somewhat sloppily nut placement where the glue got kinda all over. the nut although is in a good spot and works great. the truss rod and neck are in overall great shape and work exactly as intended. all in all an excellent project guitar neck for your next guitar build. tuners are original to the guitar and function great sold as pictured if you have any questions please feel free to contact me

Electric guitar neck. for sale is a 24 fret 25.5 inch scaled guitar neck. modern c shaped and in good condition. frets are good and neck is straight. great for your next project. buyer pays $8 to ship in usa. thanks and peace.

Necks by fender. details: there’s no denying the allure of a roasted maple neck. resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument’s voice. this roasted maple modified esquire neck has the back shape of an early 50’s esquire but with a flatter fingerboard radius and larger frets for modern playability. this ensenada, mexico-made esquire neck features a maple fingerboard, a 9.5” radius and 22 narrow tall frets. the one-piece roasted maple neck has a thick early 50’s “u” profile with a smooth satin urethane finish on the front and back of the neck. the headstock has a gloss finish with an authentic “esquire” decal to complete the classic look. the bone nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing. for true fender authenticity, it's also serialized and stamped, with genuine headstock logo decal. other installation processes may…

The original bolt on aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. it is designed to be an aftermarket fit with most stratocasters, telecasters, and jazzmasters. it comes with everything you need to replace your current neck with one from rgi. necks are built to order with your specifications, so expect up to a two month wait before receiving your neck. neck specs: material: 6061 solid billet aluminum scale: 25.5” nut width: 1 11/16” weight: solid billet: 3 lbs 3 oz, hollow richlite: 2 lbs 2 oz frets: 22 stainless steel medium/medium fretboard radius: 12” tuners: 3+3 sperzel locking nut: 6061 aluminum (cut for heavy gauge strings)(0.013", 0.020", 0.024", 0.035", 0.046", and 0.056") or cut to your specific gauges if specified heel pocket: fender strat style (5/8” deep, 2.18” heel width, 3” total length, 5” radius heel curve) thickness: .700” at nut, .725” at 7th fret, .740” at 12th fret .760” at 15th fret neck shape: very flat u shape, maximum thinness without structural loss, no tapered heel includes: 4 stainless steel 1 1/2 “ 10-24 mounting bolts, backplate, buffing compound, and 2 microfibre cloths frequently asked questions why aluminum? when looking for a neck, there are a lot of different variables to look at. structurally, a solid billet of aluminum will offer the most rigidity of the option possible. there is no truss rod or other materials to stress and strain during temperature or moisture changes. additionally, that additional strength can help with the wear and tear of tour, stages, and other bumps and bruises any guitar will have to sustain during it’s lifespan. sonically, the density of aluminum may give you an advantage with more sustain and over tones, since the neck won’t sympathetically vibrate with the strings. this is, as with anything, certainly up for debate as to what your ears hear and your hands feel. it’s worth noting that it will feel colder to the touch since aluminum is a better thermal conductor than wood, and it does noticeably weigh more. will this fit my guitar? yes: for the most part, if you’re running a telecaster, stratocaster, or jazzmaster, you should be able to bolt this neck directly onto the body. maybe not: if you are running a t-60, jaguar, mustang, or 72’ telecaster deluxe; you cannot run this neck without modifications due to scale and bolt pattern restrictions. if you are confused and unsure, contact a local luthier to help you with your project. it’s a worthy profession to support and you’ll learn new things. if you are considering a guitar not mentioned here, then i’m not sure. can i do the change over myself? yes: most seasoned guitarist can probably do this, yes. but read this: i have pre-drilled the necks and they are tapped with machine bolts. you may have to adjust neck angle, saddle heights, and intonate your guitar afterwords. if your action is still too loose for your preference, a luthier can help you with adjusting the nut string depths to a tighter playing style. the depths are set fairly high to allow for adjustment after installation. what is the 700 series? the 700 series is the first set of necks that i designed, named after the thickness at the nut for the design. i will be continuing this convention for each style going forward, so anything with this thickness will be in the 700 series, and further designs may be in a new series for their specific design requirements. can i get something custom? short answer, yes: i can make a neck for any project. in the recent past i’ve also made custom guitars, hand-wired tube amps, cabs, a few different pedals and even a pickup. custom, multiple runs: if you are a guitar builder and are interested in ordering a batch of necks custom fit and finished for your company or brand, please reach out. i can offer discounts for custom work at scale. fully custom, one-off builds: if you have your sights set on something fully custom, i’d be glad to chat with you about your needs. this process is expensive. the new neck would need to be prototyped, engineered, manufactured, and then finished, all with processes and measurements outside of my normal set-up. you’d be looking at at least a handful of months and a starting price around $5,000. can i get mine cheaper? faster? no affirm asked me to add this, if you use affirm please read this or something like that if you finance with affirm and if one or more items in your order has an extended ship date, your loan payment(s), including interest, may be due before the

Well polished wood guitar neck, guitar neck, for christmas gifts instrument lovers professionals beginner specification: features: made of high-quality maple wood which is more sturdy and resonant, durable in use. professional manufacturing, exquisite workmanship, light and elegant. well polished , no burrs or scratches. the fingerboard is designed with 22 frets, great replacement for electric guitars. there is a truss rod adjust at the headstock. specification: item type: guitar neck neck wood: solid wood fretboard wood: maple wood inlay: inlaid scale length: about 24-3/4 inch. nut width: about 42mm width at heel: about 56.7mm frets: 22 jumbo nickel/silver frets truss rod adjust: at headstock package list: 1 x guitar neck gender: male.