Bolt On Aluminum Guitar Neck For Sale (2024 Update)

The original aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. it is designed to be an aftermarket fit with most stratocasters, telecasters, and jazzmasters. it comes with everything you need to replace your current neck with one from rgi. this neck is built and ready to ship! neck specs: material: 6061 solid billet aluminum scale: 25.5” nut width: 1 11/16” frets: 22 stainless steel medium/medium fretboard radius: 12” tuners: 3+3 sperzel locking nut: 6061 aluminum (cut for heavy gauge strings)(0.013", 0.020", 0.024", 0.035", 0.046", and 0.056") heel pocket: fender strat style (5/8” deep, 2.18” heel width, 3” total length, 5” radius heel curve) thickness: .700” at nut, .725” at 7th fret, .740” at 12th fret .760” at 15th fret neck shape: very flat u shape, maximum thinness without structural loss, no tapered heel includes: 4 stainless steel 1 1/2 “ 10-24 mounting bolts, backplate, buffing compound, and 2 microfibre cloths frequently asked questions why aluminum? when looking for a neck, there are a lot of different variables to look at. structurally, a solid billet of aluminum will offer the most rigidity of the option possible. there is no truss rod or other materials to stress and strain during temperature or moisture changes. additionally, that additional strength can help with the wear and tear of tour, stages, and other bumps and bruises any guitar will have to sustain during it’s lifespan. sonically, the density of aluminum may give you an advantage with more sustain and over tones, since the neck won’t sympathetically vibrate with the strings. this is, as with anything, certainly up for debate as to what your ears hear and your hands feel. it’s worth noting that it will feel colder to the touch since aluminum is a better thermal conductor than wood, and it does noticeably weigh more. will this fit my guitar? yes: for the most part, if you’re running a telecaster, stratocaster, or jazzmaster, you should be able to bolt this neck directly onto the body. maybe not: if you are running a t-60, jaguar, mustang, or 72’ telecaster deluxe; you cannot run this neck without modifications due to scale and bolt pattern restrictions. if you are confused and unsure, contact a local luthier to help you with your project. it’s a worthy profession to support and you’ll learn new things. if you are considering a guitar not mentioned here, then i’m not sure. can i do the change over myself? yes: most seasoned guitarist can probably do this, yes. but read this: i have pre-drilled the necks and they are tapped with machine bolts. you may have to adjust neck angle, saddle heights, and intonate your guitar afterwords. if your action is still too loose for your preference, a luthier can help you with adjusting the nut string depths to a tighter playing style. the depths are set fairly high to allow for adjustment after installation. what is the 700 series? the 700 series is the first set of necks that i designed, named after the thickness at the nut for the design. i will be continuing this convention for each style going forward, so anything with this thickness will be in the 700 series, and further designs may be in a new series for their specific design requirements. can i get something custom? short answer, yes: i can make a neck for any project. in the recent past i’ve also made custom guitars, hand-wired tube amps, cabs, a few different pedals and even a pickup. custom, multiple runs: if you are a guitar builder and are interested in ordering a batch of necks custom fit and finished for your company or brand, please reach out. i can offer discounts for custom work at scale. fully custom, one-off builds: if you have your sights set on something fully custom, i’d be glad to chat with you about your needs. this process is expensive. the new neck would need to be prototyped, engineered, manufactured, and then finished, all with processes and measurements outside of my normal set-up. you’d be looking at at least a handful of months and a starting price around $5,000. can i get mine cheaper? faster? no affirm asked me to add this, if you use affirm please read this or something like that if you finance with affirm and if one or more items in your order has an extended ship date, your loan payment(s), including interest, may be due before the merchant ships all of the items. please note that you may not receive a rebate of any interest that may have already accrued on an amount that later gets refunded.

Details: fret: cupronickel nut: abs dimension information tuner hole: 10mm width at nut: 42mm with at heel: 57.5mm( 0.5 mm deviation) thickness at heel: 27mm truss rod: two-way adjustable, 4mm allen wrench adjustable truss rod has been installed at the headstock. neck wood: maple frets: 22 frets

Description: electric guitar neck 7.5k pickup. and high quality, testing is fine. suitable for electric guitar. install and use. material: alloy size chart: l x w: approx. 77 x 21mm/3.03 x 0.82inch package includes: 3 pieces guitar pickup

Tax free, fast free us shipping… the aurora ul aluminum guitar neck by aluminati guitars in asheville nc. watch the videos here…

The newest aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. designed to work with lower tunings by increasing the scale length of the whole instrument. it is designed to be an aftermarket fit with most stratocasters, telecasters, and jazzmasters. it comes with everything you need to replace your current neck with one from rgi. it will move the scale from a 25.5" to a 27.75", allowing for lower tuning without increasing string gauge. necks are built to order with your specifications, so expect up to a two month wait before receiving your neck. neck specs: material: 6061 solid billet aluminum scale: 25.5” nut width: 1 11/16” frets: 24 stainless steel medium/medium fretboard radius: 12” tuners: 3+3 sperzel locking nut: 6061 aluminum (cut for heavy gauge strings)(0.013", 0.020", 0.024", 0.035", 0.046", and 0.056") or cut to your specific gauges if specified heel pocket: fender strat style (5/8” deep, 2.18” heel width, 3” total length, 5” radius heel curve) thickness: .700” at nut, .725” at 7th fret, .740” at 12th fret .760” at 15th fret neck shape: very flat u shape, maximum thinness without structural loss, no tapered heel includes: 4 stainless steel 1 1/2 “ 10-24 mounting bolts, backplate, buffing compound, and 2 microfibre cloths frequently asked questions why aluminum? when looking for a neck, there are a lot of different variables to look at. structurally, a solid billet of aluminum will offer the most rigidity of the option possible. there is no truss rod or other materials to stress and strain during temperature or moisture changes. additionally, that additional strength can help with the wear and tear of tour, stages, and other bumps and bruises any guitar will have to sustain during it’s lifespan. sonically, the density of aluminum may give you an advantage with more sustain and over tones, since the neck won’t sympathetically vibrate with the strings. this is, as with anything, certainly up for debate as to what your ears hear and your hands feel. it’s worth noting that it will feel colder to the touch since aluminum is a better thermal conductor than wood, and it does noticeably weigh more. will this fit my guitar? yes: for the most part, if you’re running a telecaster, stratocaster, or jazzmaster, you should be able to bolt this neck directly onto the body. maybe not: if you are running a t-60, jaguar, mustang, or 72’ telecaster deluxe; you cannot run this neck without modifications due to scale and bolt pattern restrictions. if you are confused and unsure, contact a local luthier to help you with your project. it’s a worthy profession to support and you’ll learn new things. if you are considering a guitar not mentioned here, then i’m not sure. can i do the change over myself? yes: most seasoned guitarist can probably do this, yes. but read this: i have pre-drilled the necks and they are tapped with machine bolts. you may have to adjust neck angle, saddle heights, and intonate your guitar afterwords. if your action is still too loose for your preference, a luthier can help you with adjusting the nut string depths to a tighter playing style. the depths are set fairly high to allow for adjustment after installation. what is the 700 series? the 700 series is the first set of necks that i designed, named after the thickness at the nut for the design. i will be continuing this convention for each style going forward, so anything with this thickness will be in the 700 series, and further designs may be in a new series for their specific design requirements. can i get something custom? short answer, yes: i can make a neck for any project. in the recent past i’ve also made custom guitars, hand-wired tube amps, cabs, a few different pedals and even a pickup. custom, multiple runs: if you are a guitar builder and are interested in ordering a batch of necks custom fit and finished for your company or brand, please reach out. i can offer discounts for custom work at scale. fully custom, one-off builds: if you have your sights set on something fully custom, i’d be glad to chat with you about your needs. this process is expensive. the new neck would need to be prototyped, engineered, manufactured, and then finished, all with processes and measurements outside of my normal set-up. you’d be looking at at least a handful of months and a starting price around $5,000. can i get mine cheaper? faster? no affirm asked me to add this, if you use affirm please read this or something like that if you finance with affirm and if one or more items in

Acoustic bolt on neck with bolt on style tenon, matching neck block, mounting hardware, and sound hole trussrod adjustment. scale size will be 27” and will mount at the 14th fret unless you notify us when you order . wings are glued on each side of the.. note: these are not guaranteed to work with other brands of neck blocks. 1.75 at the nut / 2.30 at the 14th fret. you may need to shorten the tenon for proper alignment depending on the thickness of your sides. by penta guitarworks made in the usa ****** please note: this product may take up to 10 working days until it ships out depending on our backlog 1.5 degree shoulder bolt on tenon, matching the heel is 4"high. these blanks are made in barberton, oh, usa, please note measurements are within 1/32 of an inch. note: the bottom 2 +" of the heel is glued on. .

Tax free, fast free us shipping… the aurora aluminum bass guitar neck by aluminati guitars. watch the videos here…

This solo guitar neck is intended as a replacement or diy project. neck specifications may have a +/- 1 or 2mm variance. please note this neck heel is blank and will require shaping to fit all neck pockets. this neck is unfinished and comes pre-sealed with a poly-resin sealer. features bolt-on maple neck rosewood fretboard 12′′ radius 22 frets 2-way truss rod mop dot inlays & side markers 24 3/4′′ scale length item shown: solo lp style 22 fret guitar neck – bolt on model #: sl-lpnrw22h-ub upc: 842561004239

Bolt on unfinished electric guitar neck mahogany & rosewood fingerboard #3

Specification finish: matt position marker: white dots fret: cupronickel nut: abs dimension information tuner hole: 10mm width at nut: 42mm scale length: 648mm / 25.51 inch with at heel: 57mm(± 0.5 mm deviation) thickness at heel: 28mm truss rod: two-way adjustable, 4mm allen wrench package include 1 x guitar neck

A great example of our more recent fretless guitar necks now available for purchase. enjoy the professional timbre and stability of an aluminum guitar neck combined with the unique sounds of a fretless guitar. all at a fraction of the price. we used a washburn n series body as the controls for the musician to navigate through the experience of fretless guitar. it s an interesting, unique and rewarding addition to your collection and toolbox of sounds. fast secure shipping. thanks for looking. have a nice day

Great for attaching necks to electric guitars and cigar box guitars . fit for strat,tele,lp,sg,style guitars precision,jazz bass guitar or similar.

The fourth bolt on aluminum neck design from robot graves industries. this neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. it is designed to be an aftermarket fit with most mustang, bronco, and musicmaster style basses. it comes with everything you need to replace your current neck with one from rgi. these are built to order with your specifications, so expect up to a two month wait before receiving your neck. neck specs: material: 6061 milled aluminum scale: 30” nut width: 1 5/8” frets: 20 stainless steel medium/medium fretboard radius: 12” tuners: 2+2 sperzel locking nut: 6061 aluminum (0.050”, 0.070”, 0.085”, 0.105”) or cut to your specific gauges if specified heel pocket: fender style (5/8” deep, 2.250” maximum heel width, 4.2” total length, 5” radius heel curve) thickness: .700” at nut, .725” at 7th fret, .735” at 12th fret, 1” at heel neck shape: very flat u shape, maximum thinness without structural loss, no tapered heel includes: 4 stainless steel 1 1/2 “ 10-24 mounting bolts, backplate, buffing compound, and 2 microfibre cloths frequently asked questions why aluminum? when looking for a neck, there are a lot of different variables to look at. structurally, a solid billet of aluminum will offer the most rigidity of the option possible. there is no truss rod or other materials to stress and strain during temperature or moisture changes. additionally, that additional strength can help with the wear and tear of tour, stages, and other bumps and bruises any guitar will have to sustain during it’s lifespan. sonically, the density of aluminum may give you an advantage with more sustain and over tones, since the neck won’t sympathetically vibrate with the strings. this is, as with anything, certainly up for debate as to what your ears hear and your hands feel. it’s worth noting that it will feel colder to the touch since aluminum is a better thermal conductor than wood, and it does noticeably weigh more. will this fit my bass? yes: for the most part, if you’re running a mustang, bronco, or musicmaster; you should be able to bolt this neck directly onto the body. if you are considering a bass not mentioned here, then i’m not sure. can i do the change over myself? yes: most seasoned guitarist can probably do this, yes. but read this: i have pre-drilled the necks and they are tapped with machine bolts. you may have to adjust neck angle, saddle heights, and intonate your guitar afterwords. if your action is still too loose for your preference, a luthier can help you with adjusting the nut string depths to a tighter playing style. the depths are set fairly high to allow for adjustment after installation. what is the 700 series? the 700 series is the first set of necks that i designed, named after the thickness at the nut for the design. i will be continuing this convention for each style going forward, so anything with this thickness will be in the 700 series, and further designs may be in a new series for their specific design requirements. can i get something custom? short answer, yes: i can make a neck for any project. in the recent past i’ve also made custom guitars, hand-wired tube amps, cabs, a few different pedals and even a pickup. custom, multiple runs: if you are a guitar builder and are interested in ordering a batch of necks custom fit and finished for your company or brand, please reach out. i can offer discounts for custom work at scale. fully custom, one-off builds: if you have your sights set on something fully custom, i’d be glad to chat with you about your needs. this process is expensive. the new neck would need to be prototyped, engineered, manufactured, and then finished, all with processes and measurements outside of my normal set-up. you’d be looking at at least a handful of months and a starting price around $5,000. can i get mine cheaper? faster? no affirm asked me to add this, if you use affirm please read this or something like that if you finance with affirm and if one or more items in your order has an extended ship date, your loan payment(s), including interest, may be due before the merchant ships all of the items. please note that you may not receive a rebate of any interest that may have already accrued on an amount that later gets refunded.

The second bolt on aluminum neck design from robot graves industries. this neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. it is designed to be an aftermarket fit with most p and j style basses. it comes with everything you need to replace your current neck with one from rgi. these are built to order with your specifications, so expect up to a two month wait before receiving your neck. neck specs: material: 6061 milled aluminum scale: 34” nut width: 1 5/8” frets: 21 stainless steel medium/medium fretboard radius: 12” tuners: 2+2 sperzel locking nut: 6061 aluminum (0.050”, 0.070”, 0.085”, 0.105”) or cut to your specific gauges if specified heel pocket: fender style (5/8” deep, 2.481” maximum heel width, 3.875” total length, 5” radius heel curve) thickness: .700” at nut, .725” at 7th fret, .740” at 12th fret, 1” at heel neck shape: very flat u shape, maximum thinness without structural loss, no tapered heel includes: 4 stainless steel 1 1/2 “ 10-24 mounting bolts, backplate, buffing compound, and 2 microfibre cloths frequently asked questions why aluminum? when looking for a neck, there are a lot of different variables to look at. structurally, a solid billet of aluminum will offer the most rigidity of the option possible. there is no truss rod or other materials to stress and strain during temperature or moisture changes. additionally, that additional strength can help with the wear and tear of tour, stages, and other bumps and bruises any guitar will have to sustain during it’s lifespan. sonically, the density of aluminum may give you an advantage with more sustain and over tones, since the neck won’t sympathetically vibrate with the strings. this is, as with anything, certainly up for debate as to what your ears hear and your hands feel. it’s worth noting that it will feel colder to the touch since aluminum is a better thermal conductor than wood, and it does noticeably weigh more. will this fit my bass? yes: for the most part, if you’re running a precision, jazz, or jaguar, you should be able to bolt this neck directly onto the body. maybe not: if you are running a t-40, mustang, squier vintage modified jaguar bass special ss ; you cannot run this neck without modifications due to scale and bolt pattern restrictions. if you are confused and unsure, contact a local luthier to help you with your project. it’s a worthy profession to support and you’ll learn new things. if you are considering a bass not mentioned here, then i’m not sure. can i do the change over myself? yes: most seasoned guitarist can probably do this, yes. but read this: i have pre-drilled the necks and they are tapped with machine bolts. you may have to adjust neck angle, saddle heights, and intonate your guitar afterwords. if your action is still too loose for your preference, a luthier can help you with adjusting the nut string depths to a tighter playing style. the depths are set fairly high to allow for adjustment after installation. what is the 700 series? the 700 series is the first set of necks that i designed, named after the thickness at the nut for the design. i will be continuing this convention for each style going forward, so anything with this thickness will be in the 700 series, and further designs may be in a new series for their specific design requirements. can i get something custom? short answer, yes: i can make a neck for any project. in the recent past i’ve also made custom guitars, hand-wired tube amps, cabs, a few different pedals and even a pickup. custom, multiple runs: if you are a guitar builder and are interested in ordering a batch of necks custom fit and finished for your company or brand, please reach out. i can offer discounts for custom work at scale. fully custom, one-off builds: if you have your sights set on something fully custom, i’d be glad to chat with you about your needs. this process is expensive. the new neck would need to be prototyped, engineered, manufactured, and then finished, all with processes and measurements outside of my normal set-up. you’d be looking at at least a handful of months and a starting price around $5,000. can i get mine cheaper? faster? no affirm asked me to add this, if you use affirm please read this or something like that if you finance with affirm and if one or more items in your order has an extended ship date, your loan payment(s), including interest, may be due before the merchant ships all of the items. please note that you may not receive a rebate of any interest that may have already accrued on an amount that later gets

Neck plate ideal for fender style guitar. 4 holes. comes with screws and back plastic plate. ready to use.

The mrk1 neck is crafted with high-grade anodized aluminum and topped with a rubber molded ball mount. the neck is compatible with the desk stand and monitor mount. note: the mrk1 base kit includes a neck

Electric guitar neck maple rosewood fretboard bolt on paddle item condition: item is used and may show general signs of wear from normal use. it may have small visible cosmetic imperfections. please check all attached pictures to get a better view of the condition. sometimes we miss a flaw in this description but you will be able to see it from the pictures. payment terms shipping terms return terms we are only able to accept paypal payments; it's secure and offers the most protection to buyers and sellers alike. paypal also gives you the flexibility to pay with your checking account, debit, or credit cards. payment is expected within 4 days. an automatic unpaid reminder is sent after 4 days without payment which will give you an additional 4 day to make payment. this is the 8 day total.8.25% sales tax charged for texas buyers we can ship to any country on the global shipping platform for most of our items. combined shipping is not available for international shipping. we ship most packages out within 1 business day. all items will be package securely and any item over $300 will include insurance free of charge. 30 day money back guaranteewe strive for the highest customer service and have maintained close to 100% positive feedback since 2000. we honor full refunds and returns for 30 days after the items are delivered. if you ever have a problem with your order we will do everything in our power to find a fair solution and make sure you would come back and shop with us again.we do our best to respond to messages within 24 hours and we greatly appreciate you picking us for your buying experience.

Store home |sporting goods |health & beauty |home & garden |toys & hobbies |jewelry & watches |musical instruments & gear electric guitar neck w/ screws for bass guitar description: brand new for st/sq style electric guitar/bass great for replacement parts included the protected plastic &4 screws color: as the picture shown material: metal package includes: 1pc guitar neck 4pcs screws payment shipping returns we only accept paypal payment. if you are bidding or ordering more than one item, the items will be combined into one order automatically thus you can pay altogether. if you want not to combine, please buy one and immediately pay one separately. please pay what you win in 7 days. unpaid dispute will be automatically open if payment is not received after 7 days. if you pay the bill after received unpaid dispute, please email us to close the unpaid dispute. because the unpaid dispute will not be closed automatically, and we may ignore it. the buyer is responsible for any applicable import duties and local

Great for attaching necks to electric guitars and cigar box guitars .fit for strat,tele,lp,sg,style guitars precision,jazz guitar or similar. ,never used colour: black material: metal size: the plate size(l x w): 64 mm * 51 mm the protect plate size(l x w): 67 mm * 54 mm mounting hole distance(screw hole center to center l x w): approx 51mm x 38mm screw size: 44 mm (l) 9.2 mm diameter (top) package contents: 1 *set guitar neck plate only the above package content, other products are not included. note: light and different displays may cause the color of the item in the picture a little different from the real thing. the measurement allowed error is +/- 1-3cm. gender: male.

Unique headstock shape,you can diy your own electric bass well-constructed nut and horizontal fret level bring you comfortable playing experience and prevent the strings from buzzing. two-way adjustable truss rod helps stabilize the performance of your bass neck that is susceptible to humidity and tension from bass strings. canadian maple wood makes the sound more loud and clear.the effective chord length of the neck of the electric guitar is 34"(864mm),fingerboard radius 14"(356 mm) for more dimensions, you can refer to the picture or contact me. gloss urethane finish on fingerboard and headstock face; satin finish on back of neck. 1