When you shop through links on our site, we may earn an affiliate commission. This educational content is not intended to be a substitute for professional advice.

Are you looking for the Bass Guitar Parts And Accessories? If so, you’ve come to the right place.

Choosing the Bass Guitar Parts And Accessories can be difficult as there are so many considerations, such as EMG, Martin, WD Music, Peavey, Fender, Gotoh, ammoon. We have done a lot of research to find the top 20 Bass Guitar Parts And Accessories available.

The average cost is $99.74. Sold comparable range in price from a low of $5.59 to a high of $625.00.

Based on the research we did, we think Fender Deluxe F Stamp Bass Tuning Machine Set | Chrome is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.

20 Best Selling Bass Guitar Parts And Accessories (20 Sellers)

Product Image Product Name Features Check Price
    • Set of four cloverleaf design tuning machines
    • Two-guide mounting pin design
    • “authentic fender ” tuning gear stamp
    • Dual ceramic magnet
    • 42 gauge heavy formvar wire
    • Single conductor, heat resistant teflon coated wire
    • 2 separate tools-guitar 24 3/4" & 25 1/2" scales – bass 35" & 34" scale lengths
    • 6061 aluminum- nice brushed finish. machined edges, made in usa
    • High quality replacement wiring kit for fender precision bass – not intended for use with guitars using metric components
    • 2x cts 450g series 250k dish back short solid shaft audio taper pots – 10% tolerance
    • 3 feet vintage-correct 22awg tinned cloth push back wire (18 inches black and 18 inches white)
    • The stereo pure tone jack contains dual rings for optimal signal and lowest possible noise.
    • The pure tone jack allows for increased current handling at 500 volts for high current applications.
    • Tensioned design locks cable securely in place while the increased metal mass carries more signal.
    • There is 13 screw holes in the side of pickguard, with truss rod notch.
    • Material: 3ply constructions made of quality pvc plastic material. color: mint green / black / mint green.
    • Package includes: 1pcs precision bass guitar pickguard.
    • Fits fender precision & jazz basses
    • Top quality cast bridge with the standard 3/4" (19mm) string spacing
    • Features stock fender mounting holes and is adjustable for string height and intonation
    • This kit has everything a bass player needs
    • String cutter, stringwinder, multi-tool
    • Gig light, fret collars, micro fret cloth
    • Pickguard for jazz-bass 3 ply wp/b/w (white pearloid j-bass)
    • All parts (usa)
    • Humbucking pickup ring set – neck and bridge, flat bottom.
    • Metal construction, durable and sturdy, not easy to deform. nice accessory to replace the broken or old pickup rings to dress up your guitar.
    • Mounting screws are not included. special distinctive shape, very attractive.
    • Solid brass
    • Chrome plated
    • 2-1/2" x 1/2" x 1/2"
    • Very cool parts bass! genuine fender 51 p bass neck, not sure of the body. sounds fat and punchy. no case included…
    • Find 4pcs vintage bass bridge accessories for 4 string electric bass guitar tools on ebay in the category musical instruments & gear>guitars & basses>parts & accessories>guitar & bass parts>bridges….
    • A set of real vintage.
    • 1978 fender precision or jazz bass tuners made in germany vg++.
    • Removed from the 1978 neck shown in the photo. these actual 70's tuners not.
    • These pickup covers are great replacement or repair parts for 5 string bass guitar, in 2 different sizes, short one for neck pickup and the long one for bridge pickup….
    • Consists of 7 bass baits…
    • When considering any purchase, know exactly who you are dealing with. please read our about us page. we have a set of gold hardware that was pulled off of a…
    • Ultralite tuners will lighten your headstock and help to balance out the weight of your bass.
    • Machine crafted aluminum gives the ultralight tuners a high ruggedness and durability.
    • 20:1 gear ratio provides very quick and accurate tuning of your bass.
    • The guitar string trees retainer,bass string trees retainer compatible with fender stratocaster st sq series and most electric guitars.
    • Made of durable metal material, ready for use.
    • Color: silver, black, gold(optional).
    • Plate dimensions: 64.5mm x 51mm/2.5"x2". the screw hole center size:51mm x 38mm/2"x1.49". material: metal alloy; color: chrome. widely used: fits fender style stratocaster/ telecaster guitar or bass. package includes: 1…

Show more
Show less

Fender Deluxe F Stamp Bass Tuning Machine Set | Chrome
Features:
  • Set of four cloverleaf design tuning machines
  • Two-guide mounting pin design
  • “authentic fender ” tuning gear stamp
Buy On Amazon
Aguilar DCB-G4 Bass Pickup Set
$269.99
4.2
Reviewers Noted:
Sound quality
Features:
  • Dual ceramic magnet
  • 42 gauge heavy formvar wire
  • Single conductor, heat resistant teflon coated wire
Sweetwater
Made in USA Guitar and Bass Notched Straight Edge Set.
Features:
  • 2 separate tools-guitar 24 3/4" & 25 1/2" scales – bass 35" & 34" scale lengths
  • 6061 aluminum- nice brushed finish. machined edges, made in usa
Buy On Amazon
TAOT Wiring Kit – Fender Precision Bass P-Bass – Orange Drop Cap
Reviewers Noted:
Craftsmanship
Features:
  • High quality replacement wiring kit for fender precision bass – not intended for use with guitars using metric components
  • 2x cts 450g series 250k dish back short solid shaft audio taper pots – 10% tolerance
  • 3 feet vintage-correct 22awg tinned cloth push back wire (18 inches black and 18 inches white)
Buy On Amazon
2 Pack of Pure Tone Full-Contact Output Jack for Guitar/Bass with Mounting Hardware
Features:
  • The stereo pure tone jack contains dual rings for optimal signal and lowest possible noise.
  • The pure tone jack allows for increased current handling at 500 volts for high current applications.
  • Tensioned design locks cable securely in place while the increased metal mass carries more signal.
Buy On Amazon
IKN 3Ply Mint Green 13 Hole P Bass Pickguard Scratch Plate Pick Guard for 4 String American/Mexican Standard Precision Bass Part
$11.50
3.7
Reviewers Noted:
Durability . Visual appeal
Features:
  • There is 13 screw holes in the side of pickguard, with truss rod notch.
  • Material: 3ply constructions made of quality pvc plastic material. color: mint green / black / mint green.
  • Package includes: 1pcs precision bass guitar pickguard.
Iknmusic
Long Beach Music Bass Bridge for 4-String Fender Jazz or Precision Bass, Chrome, Silver
Features:
  • Fits fender precision & jazz basses
  • Top quality cast bridge with the standard 3/4" (19mm) string spacing
  • Features stock fender mounting holes and is adjustable for string height and intonation
Buy On Amazon
Dunlop DGT122 Complete Guitar and Bass Setup Tool Kit
$79.99
Features:
  • This kit has everything a bass player needs
  • String cutter, stringwinder, multi-tool
  • Gig light, fret collars, micro fret cloth
Sweetwater
Allparts Jazz Bass Pickguard, White Pearl
$27.59
1.0
Features:
  • Pickguard for jazz-bass 3 ply wp/b/w (white pearloid j-bass)
  • All parts (usa)
Ebay
Guyker Flat Metal Humbucker Pickup Mounting Ring Set – Bridge Neck Pickups Cover Frame Replacement Part for Electric Guitar or Precision Bass(2PCS,
Features:
  • Humbucking pickup ring set – neck and bridge, flat bottom.
  • Metal construction, durable and sturdy, not easy to deform. nice accessory to replace the broken or old pickup rings to dress up your guitar.
  • Mounting screws are not included. special distinctive shape, very attractive.
Buy On Amazon
Allparts Bass Thumbrest Chrome
$11.39
Features:
  • Solid brass
  • Chrome plated
  • 2-1/2" x 1/2" x 1/2"
Ebay
Fender 50s style parts bass Natural
$625.00
Features:
  • Very cool parts bass! genuine fender 51 p bass neck, not sure of the body. sounds fat and punchy. no case included…
Reverb
4pcs Vintage Bass Bridge Accessories For 4 String Electric Bass Guitar
$16.69
Features:
  • Find 4pcs vintage bass bridge accessories for 4 string electric bass guitar tools on ebay in the category musical instruments & gear>guitars & basses>parts & accessories>guitar & bass parts>bridges….
Ebay
Fender Vintage-Style '70s Bass Tuning Machines (IMPORT), Chrome (4)
$119.99
Features:
  • A set of real vintage.
  • 1978 fender precision or jazz bass tuners made in germany vg++.
  • Removed from the 1978 neck shown in the photo. these actual 70's tuners not.
Tubedepot
mLaval Guitar Parts Bass Guitar Pickup Cover Black
$6.50
3.0
Reviewers Noted:
Craftsmanship
Features:
  • These pickup covers are great replacement or repair parts for 5 string bass guitar, in 2 different sizes, short one for neck pickup and the long one for bridge pickup….
Reverb
Bass Starter Kit
$170.00
Features:
  • Consists of 7 bass baits…
Fatguysfishing
Fender Jazz Bass Hardware Set Gold 1982
$349.00
Features:
  • When considering any purchase, know exactly who you are dealing with. please read our about us page. we have a set of gold hardware that was pulled off of a…
Reverb
Hipshot Ultralight Bass Guitar Tuner Set – 4 Black Tuners – 3/8" Post Size – 2 Bass Side + 2 Treble Side
Features:
  • Ultralite tuners will lighten your headstock and help to balance out the weight of your bass.
  • Machine crafted aluminum gives the ultralight tuners a high ruggedness and durability.
  • 20:1 gear ratio provides very quick and accurate tuning of your bass.
Buy On Amazon
8Pairs Yootones Guitar String Trees String Retainer Guides Compatible with Strat Tele Style Electric Guitar Bass Parts Replacement (Black)
Features:
  • The guitar string trees retainer,bass string trees retainer compatible with fender stratocaster st sq series and most electric guitars.
  • Made of durable metal material, ready for use.
  • Color: silver, black, gold(optional).
Buy On Amazon
MAXCHEER Electric Bass Guitar Neck plate Guitar Neck Joint Connecting Strengthen Plate Guitar Parts (Chrome)
Features:
  • Plate dimensions: 64.5mm x 51mm/2.5"x2". the screw hole center size:51mm x 38mm/2"x1.49". material: metal alloy; color: chrome. widely used: fits fender style stratocaster/ telecaster guitar or bass. package includes: 1…
Buy On Amazon

Show more
Show less

1. Fender Deluxe F Stamp Bass Tuning Machine Set | Chrome

Buy On Amazon
Shop on Adorama

Product Details:

Set of four chrome tuning machines with fender "f"-logo casing stamps, for use on modern precision bass, jazz bass and dimension bass models, including american standard basses manufactured from 2007-present and american deluxe basses manufactured from 2009-present. bushings and mounting hardware included.
Show more
Show less

Specifications:

Product Dimensions 5.5 x 4.5 x 0.75 inches
Country of Origin USA
Is Discontinued By Manufacturer No

Reviews:

This new production tube is a great replacement for any gears using 12AU7 preamp tubes. The sound is warm with full density, especially at the low-frequency region. Great C/P value and it is worthwhile for you to try at this low price range.EW
Show more
Show less
Love the tuners. They are good for precision tuningtakoda67
I put this tube in V2 of my Splawn Quickrod and it sounds killer. It helps to tame some of the high end in this amp while still allowing the signature mids to shine through. Highly recommend this tube in a quickrod or other inherently bright amp.Brian
Show more
Show less

2. Aguilar Dcb-G4 Bass Pickup Set

Shop on Sweetwater
Shop on Reverb

Product Details:

The pickups use dual ceramic bar magnets that provide a dynamic and responsive attack that works for all playing styles. the pickups have well-developed overtones and singing sustain in the body and decay of the notes. the uniform magnetic field of a bar magnet allows each note to have accurate dynamic response and more harmonic content. the pickups sound great installed in a passive bass or with an onboard preamp. 38mm x 102mm.
Show more
Show less

Reviews:

It's got both sound, crispy single and hum punch! passive active both sound working are also very useful and awesome!coda10thwooil
These pickups are everything they claim to be!drslglassgtsbc
These pickups have definitely given my bass a much improved sound.John H.

3. Made In Usa Guitar And Bass Notched Straight Edge Set.

Buy On Amazon

Product Details:

Machined edges, made in usa made in california send from ca, get it in 5 to 6 days. this is the only true way to check for straightness before leveling your frets. essential for proper truss rod adjustment. includes guitar: fender/gibson 24 3/4" & 251/2" fender bass 34" and 35" lengths for 4 & 5 strings standard basses. . machined edge 6061 aluminum. cnc precision machined for a flatness of +/- .001" good to use with 18 or 20 fret necks..doesn't matter. use with strings on or off. notched to the 19th fret with clearance for more frets and clearance for the nut on the other end. covers the entire length for the neck . you can also place on top of the frets (off the cut notches) to use as a standard straightedge to check fret wear and level. if you’re not sure scale length of your bass… measure from the edge of the nut (headstock) to the center of the 12th fret.
Show more
Show less

Specifications:

Package Dimensions 18.4 x 1.8 x 0.2 inches

4. Taot Wiring Kit – Fender Precision Bass P-Bass – Orange Drop Cap

Buy On Amazon
Shop on Mechanicsurplus

Product Details:

Deluxe wiring kit for fender usa precision bass all parts in the kit are extremely durable high quality parts sized for usa manufactured fender's upgrade your components and hear the difference for years to come. note! – unfortunately, these parts are not compatible with import guitars using metric sizing.
Show more
Show less

Specifications:

Package Dimensions 5 x 3 x 1 inches
Is Discontinued By Manufacturer No
Back Material Bass Wood
Scale Length 18 Inches
String Material Brass
Number of Strings 6

Show more
Show less

5. 2 Pack Of Pure Tone Full-Contact Output Jack For Guitar/bass With Mounting Hardware

Buy On Amazon
Shop on Ebay

Product Details:

A standard 1/4 inch jack utilizes a pressure ground and a single hot positive connection; as actual grounds are not connected to the sleeve the pressure of the tip dictates how good the ground is resulting in inferior sound quality (i.e. that "static sound"). not only is the signal strength compromised and weaker the actual sound is inferior because you never have a solid ground and the poor connection at the tip contact is so minimal. with the new pure tone jack the audio jack as you know it will never be the same again. the pure tone audio jack has 2 actual concave ground contacts that hug the sleeve on both sides and 2 concave hot leads wrapping both sides of the positive tip. not only is the signal much cleaner stronger and clearer but all aspects of the eq spectrum are also greatly improved while eliminating those nasty spikes. in addition the pure tone jack has greatly increased the voltage handling capacity while leaving a smaller footprint for those tight spaces. the new standard jack has been born! the pure tone multi-contact jack was invented by dave linsk lead guitarist of the international recording group overkill. the jack was created as a result of constant failures of the current production jack models that have been available on the market until now. as it turns out the 100 year old audio jack design really needed some changes to make it road worthy!
Show more
Show less

Specifications:

Package Dimensions 2.4 x 2.28 x 1.61 inches
Is Discontinued By Manufacturer No

Reviews:

I swapped out all of the Switchcraft jacks in 6 of my basses. These are quality jacks. The connection feels tighter than a normal jack and it seems like its a better, more stable connection. Its a long overdue upgrade to the 1/4 inch jack.glenkathyericethan
Show more
Show less
Easy install for any amateur solderer. The connection of 1/4" plug into the jack is soooo secure.softtailt
holds 1/4 plug very goodjefstea

6. Ikn 3ply Mint Green 13 Hole P Bass Pickguard Scratch Plate Pick Guard For 4 String American/mexican Standard Precision Bass Part

Shop on Iknmusic

Product Details:

Make sure this fits by entering your model number. pickguard for american/mexico standard fender modern style precision bass 4 string model guitar. 13 mounting screws holes in the side of scratplate, with truss rod notch. kindly check the dimension size before purchasing. smooth finished edge, 3ply pvc material plate, approx. 0.09-0.11inch thickness. color: mint green. double layers protective films on the surface to anti-scratch, kindly split it off after replacing. with pure aluminum foil shield on the backside. package list: 1 x precision bass pickguard, 25 x mounting screws.
Show more
Show less

Specifications:

Product Dimensions 14.61 x 8.86 x 0.12 inches
Is Discontinued By Manufacturer No
Color Name 3Ply Mint Green
Number of Strings 4

Reviews:

No screws included .not acceptable tort finish. Have given it away and bought better.chchr.wi.cmjots
Good quality pickguard for american standard P Bass.jazol71
Quality pickguard.Fitted to Fender mex P-Bass. Tiny bit of filing required to get it to fit perfectly.logiemink

7. Long Beach Music Bass Bridge For 4-String Fender Jazz Or Precision Bass, Chrome, Silver

Buy On Amazon
Shop on Walmart

Product Details:

Upgrade or repair your instrument with the 4-string bass bridge by long beach music. cast with durable materials, it's long-lasting and reliable. a sleek chrome finish complements other guitar accessories and adds to the look of your bass. standard 3/4 inch string spacing keeps the strings the right distance apart for precise and rhythmic playing. with stock fender mounting holes, the chrome bass bridge is compatible with both fender precision and jazz bass models. it's adjustable to modify string height and create a range of different intonations and achieve various musical textures. matching mounting screws hold the fender jazz bass bridge in place while blending in and maintaining low visibility. installation and adjustment is simple and easy using a screwdriver. quick removal allows for fast string replacements and re-stringing your instrument. the bridge holds strings securely in place, ensuring a resonant response to each note.
Show more
Show less

Specifications:

Package Dimensions 3.31 x 2.17 x 0.95 inches
Color Name Chrome

8. Dunlop Dgt122 Complete Guitar And Bass Setup Tool Kit

Shop on Sweetwater
Shop on Pitbullaudio

Product Details:

The system 65 complete guitar & bass setup tool kit includes the following pro-quality tools that you can use to provide crucial care to your instrument and keep it in top playing shape for years to come.
Show more
Show less

Specifications:

Watchers 1
Finish Tool

9. Allparts Jazz Bass Pickguard, White Pearl

Shop on Ebay
Shop on Texasguitarcompany

Product Details:

Pickguard for fender mexican standard jazz bassthis replacement pickguard is made to fit the genuine made in mexico fender jazz bass.
Show more
Show less

10. Guyker Flat Metal Humbucker Pickup Mounting Ring Set – Bridge Neck Pickups Cover Frame Replacement Part For Electric Guitar Or Precision Bass(2pcs,

Buy On Amazon

Product Details:

Dimensions: outside(l x w): approx. 124.88 x 55.63mm(4.92 x 2.19 in); mounting screws distance (l x w): approx. 81.06 x 36.98mm(3.19 x 1.46 in). humbucking pickup ring set – neck and bridge, flat bottom. metal construction, durable and sturdy, not easy to deform. nice accessory to replace the broken or old pickup rings to dress up your guitar. mounting screws are not included. special distinctive shape, very attractive. note: due to different production batches of guitar and pickup frame, some covers need to be sanded to match the guitar. – dimensions: /b br – outside dimension (l x w): approx. 4.92 x 2.19 inch / 124.88 x 55.63mm br – mounting screws distance (l x w): approx. 3.19 x 1.46 inch / 81.06 x 36.98mm br – 2 colors available: antique bronze, antique silver – package includes: /b br – 2 x pickup mounting rings br – no mounting screws
Show more
Show less

Specifications:

Package Dimensions 7.56 x 4.8 x 0.63 inches
Color Name Antique Silver
Guitar Pickup Configuration H
String Material Bronze
Number of Strings 2

11. Allparts Bass Thumbrest Chrome

Shop on Ebay
Shop on Reverb

Product Details:

Chrome finished solid brass bass thumbrest with screws. fits fender basses. made by schaller. distributed by allparts music. solid brass chrome plated 2-1/2" x 1/2" x 1/2" made in germany allparts packaging allparts # ap-0621-010
Show more
Show less

Specifications:

Finish Plastic
Made In China

12. Fender 50s Style Parts Bass Natural

Shop on Reverb

Product Details:

Very cool parts bass! genuine fender 51 p bass neck, not sure of the body. sounds fat and punchy. no case included
Show more
Show less

13. 4pcs Vintage Bass Bridge Accessories For 4 String Electric Bass Guitar

Shop on Ebay

Product Details:

Find 4pcs vintage bass bridge accessories for 4 string electric bass guitar tools on ebay in the category musical instruments & gear>guitars & basses>parts & accessories>guitar & bass parts>bridges.
Show more
Show less

14. Fender Vintage-Style '70s Bass Tuning Machines (Import), Chrome (4)

Shop on Tubedepot
Shop on Reverb

Product Details:

Vintage set of bass tuners. pretty sure these are grover s and came off my old fender bass from the 90s but i m not sure so just selling cheap hoping someone can use them. i really don t remember them having the spike studs, those could have been separate punk rock flare and i don t think they are functional with the tuners but including them. also please note the very little screws fell out of the bag but will include the 3 that survived for reference. i try to keep a perfect rating. what you see in the picture is what will be mailed. basically selling for parts to help someone out. offers accepted as i don t have plans to build a bass any time soon. priced low because unsure if the set is complete or if the spike studs are part of it. rock on!
Show more
Show less

Specifications:

Finish Chrome
Year 2016

15. Mlaval Guitar Parts Bass Guitar Pickup Cover Black

Shop on Reverb
Shop on Ebay

Product Details:

These pickup covers are great replacement or repair parts for 5 string bass guitar, in 2 different sizes, short one for neck pickup and the long one for bridge pickup. – polepiece holes: no hole color: blackpackage contains: 2x bass guitar pickup covers. – long one (bridge):dimensions (interior) : 101.9mm x 16.4mm ; interior height: 18.2mm – mounting screw spacing : 49mm x23.5mm – short one(neck):dimensions (inside) : 98.5mm x 16.4mm ; interior height: 18.2mm – mounting screw spacing : 47mm x23.5mm
Show more
Show less

Specifications:

Polepiece Holes no hole
package contains 2x bass guitar pickup covers.
Finish Black

Reviews:

I got these covers to replace the ones on my set of Basslines with exposed poles, however the Basslines seem to be literally 1 mm too wide for fitting them. It's a pity since the covers are nicely made and I'm otherwise happy with a very fast overseas shipping and very good price, such a good price it's really not worth returning them.sebpaez
Show more
Show less
The Fender Jazz Bass has two pick ups, they are different sizes. Both of these are the same size, so you have a replacement cover for one and not the other? So in the trash they go!waltanddave
Show more
Show less

16. Bass Starter Kit

Shop on Fatguysfishing

Product Details:

Consists of 7 bass baits
Show more
Show less

Specifications:

Weight 32 oz

17. Fender Jazz Bass Hardware Set Gold 1982

Shop on Reverb

Product Details:

When considering any purchase, know exactly who you are dealing with. please read our about us page. we have a set of gold hardware that was pulled off of a 1982 jazz bass many many many years ago. heres what you have* set of 4 fender / schaller tuners and ferrules* bridge that has hex saddle screws * control plate* bridge mounting screws and a few misc screws* 3 knobs that were not stock to the set but are includedthe tuners and bridge are in nice cosmetic shape. the plate might clean up but as you know, polishing 'gold' it could also come right off….we guarantee the descriptions but all parts sales are final
Show more
Show less

18. Hipshot Ultralight Bass Guitar Tuner Set – 4 Black Tuners – 3/8" Post Size – 2 Bass Side + 2 Treble Side

Buy On Amazon

Product Details:

Any sore shouldered bassist can tell you that fighting "neck dive" from a poorly balanced instrument is akin to slow torture. hipshot's ultralite bass machine heads are designed and machined to lighten up the load while improving ruggedness and accuracy. spend more time on the bass–not at the chiropractor! **solid machined aircraft grade aluminum housing gives you high durability in an extremely light package. **small footprint easily installs on 4 string headstocks. **20:1 gear ratio with a full size gear and worm for super quick and accurate tuning. **tuning keys are easily reversible for conversion to bass or treble side. **set comes with y shaped keys. **3/8" string post fits 9/16" headstock holes. **set sold with 4 black tuners with "y" key. there are 2 bass and 2 treble tuners in the set. four mounting screws are included with the set.
Show more
Show less

Specifications:

Product Dimensions 6 x 5 x 3 inches
Is Discontinued By Manufacturer No
Color Name Black

19. 8pairs Yootones Guitar String Trees String Retainer Guides Compatible With Strat Tele Style Electric Guitar Bass Parts Replacement (Black)

Buy On Amazon

Product Details:

Guitars by yootones. made of durable metal material, ready for use. easy to install. key product features. 2. due to different monitors, there may be a little color difference.
Show more
Show less

Specifications:

Package Dimensions 3.66 x 2.64 x 0.24 inches
Color Name Black

20. Maxcheer Electric Bass Guitar Neck Plate Guitar Neck Joint Connecting Strengthen Plate Guitar Parts (Chrome)

Buy On Amazon

Product Details:

Plate dimensions: 64.5mm x 51mm/2.5"x2". the screw hole center size:51mm x 38mm/2"x1.49". material: metal alloy; color: chrome. widely used: fits fender style stratocaster/ telecaster guitar or bass. package includes: 1 x neck plate,come with mounting screws and back plastic plate. satisfaction guarantee: we stand by our quality commitment please do not hesitate to contact us if there is any question. we will do our best to solve the problem as soon as possible. features /b br 100% new br high quality and testing is fine br item 100% like the picture shown br material:metal and plastic br colour: chrome br size: approx 64.5mm(l) x 51.2mm(w) br mounting hole distance: approx 51mm(l) x 38mm(w) br remarks: 4 mounting screws included br br package included: /b br 1 x neck joint plates
Show more
Show less

Related posts:

  1. Fender Guitar Neck Shapes For Sale (2024 Update)
  2. Bass Guitar 6 String For Sale (2024 Update)
  3. Fender Bass Guitar 5 String For Sale (2024 Update)
  4. Electric Guitar 4 String For Sale (2024 Update)
  5. Best Electric Bass Guitar (2024 Update)
  6. Abilene Electric Guitar Prices For Sale (2024 Update)
  7. 8 String Fanned Fret Guitar For Sale (2024 Update)
  8. Electric Guitar Accessories For Beginners For Sale (2024 Update)
  9. Electric Guitar 6 String For Sale (2024 Update)
  10. Pedal Risers For Guitar Pedals For Sale (2024 Update)

Similar Posts