Are you looking for the 12 String Guitar Neck? If so, you’ve come to the right place.
Choosing the 12 String Guitar Neck can be difficult as there are so many considerations, such as WD Music, DiMarzio, Ibanez, Peavey, Fender, Stewart-MacDonald, Solo Guitar, Danelectro. We have done a lot of research to find the top 20 12 String Guitar Neck available.
The average cost is $224.89. Sold comparable range in price from a low of $59.00 to a high of $449.99.
Based on the research we did, we think Electric Guitar Double Neck – Sunburst Tobacco 12 String & 6 String is the best overall. Read on for the rest of the great options and our buying guide, where you can find all the information you need to know before making an informed purchase.
20 Best Selling 12 String Guitar Neck (20 Sellers)
| Product Image | Product Name | Features | Check Price |
|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
$279.99
2.8
Reviewers Noted:
Durability . Visual appeal
Features:
- Custom painted neck and headstock matches body color.
- Pearloid white pickguard.
- Both necks have 22 frets.
Reviewers Noted:
Durability . Sound quality . Visual appeal . Craftsmanship
Features:
- Custom painted neck and headstock matches body color.
- Pearloid white pickguard.
- Both necks have 22 frets.
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfort
Features:
- Condition: mint
- Serial #: mx19142723
- Country/make: mexico
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfort
Features:
- 13/32 (10 mm)headstock thickness
- 540 (13.71 mm)thickness at the 1st fret
- 752 (19.10 mm)thickness at the 12th fret
$349.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfort
Features:
- Genuine fender stratocaster neck crafted at fender's ensenada, mexico manufacturing facility
- Comfortable modern c-shaped profile and 9.5"-radius maple fingerboard with 21 narrow-tall frets
- The synthetic bone nut is pre-slotted with pilot grooves for accurate spacing when filing the final string slots
$399.99
4.7
Reviewers Noted:
Attractive . Well made . Durable . Good sound quality . Comfortable
Features:
- This is the exact neck you'll receive!
- This replacement neck is for a fender or squier by fender guitar.
$174.89
4.6
Reviewers Noted:
Craftsmanship . Comfort . Visual appeal
Features:
- 21 tall frets (.079" x .051"), modern
- Maple neck, sanded, unfinished and ready to spray
- Rosewood fingerboard
$231.89
5.0
Reviewers Noted:
Craftsmanship . Comfort . Visual appeal
Features:
- Chunky, solid maple neck with vintage tinted nitrocellulose finish
- 9.5" radius
- Nut width 1-5/8"
$149.07
Features:
- We always insist on "quality first, honor first, customer first".we sincerely hope to coo…
$79.00
Features:
- Wood: mahogany fingerboard: rosewood fret: 22 nut: 48 mm heel: 58 mm scale length: 24.75 inches (628 mm) truss rod adjust: at headstock or bottom…
$69.00
Features:
- 12 string electric guitar neck with rosewood fingerboard,can be customized…
$299.99
4.4
Features:
- Fitted with 21 vintage frets.
- Synthetic bone nut.
- The width of the nut is 42 mm. t.
$449.99
4.4
Features:
- Road worn nitro finish maple neck
- Mid ‘60’s “c” profile; 7.25”-radius pau ferro fingerboard
- 21 vintage tall frets; pre-slotted synthetic bone nut
$99.99
Features:
- This solo guitar neck is intended as a replacement or diy project. neck specifications may have a +/- 1 or 2mm variance. if using this neck with a non solo…
$71.00
Features:
- Description suitable for diy electric guitars amateur electric guitar neck features: 1x 12string electric guitar neck . 48mm nut 59heel neck wood: maple wood fretboard wood: rose wood finish: unfinished…
$429.99
Features:
- Pulled from a villager 12 string with some issues. the neck did play great on the guitar and was not part of the problem. fender villager 12 string neck 1965-68…
$59.00
Features:
- One good 24 fret 25.5 inch 12 string unfinished electric guitar neck 2# maple made rose wood…
$99.99
Features:
- This solo guitar neck is intended as a replacement or diy project. neck specifications may have a +/- 1 or 2mm variance. if using this neck with a non solo…
Features:
- 1. this guitar neck is compatible for fender st-style electric guitar neck replacement.
- 2. high-quality maple neck, delicate and unique.
- 3. fingerboard with 22 frets, smooth and high density.
Features:
- Beginner kits by fistrock. details:diy guitar kit – build your own electric guitar pack by bogart.
- All pickups, hardware and components included.
- Difficulty level:…
1. Electric Guitar Double Neck – Sunburst Tobacco 12 String & 6 String
Product Details:
Custom painted neck and headstock matches body color. pearloid white pickguard. both necks have 22 frets. the 12 string has a fixed bridge and the 6 string has a vintage style tremelo. fast maple bolt-on necks. basswood body there is a volume control "in between" that controls the volume for the 12 string. the tone controls and 5 way selector switch operates for both sets of pickups. very cool and unique electric guitar! un-branded to save you money! custom made!
Specifications:
Reviews:
the neck wasn't leveled the frets were sharp on the edges, the six string neck set up higher than the 12. the electronics were cheap and micro-phonic. either neck didn't seem to have a finish on them. even as a beginning guitar it wouldn't be good without a lot of work.harrisonguitars08
This guitar is very nice in appearance but the playability is a bit lacking. The tuning keys on the 12 string were stiff and binding. The volume knob for the 12 string had a wiring problem. when I would turn the volume up,(10) for the 12 string the 6 string volume would be down quite a bit. So when I switched to the 6 string I had to put the volume knob on 8 for the 12 string to get full volume for the 6. I keep all my volume knobs on 10 and adjust my overall volume from the amp. There's supposed to be separate volume knobs for this guitar but like I said there was some kinda wiring glitch. Other then this it was very nice and the sound was exceptional.merw.tom
2. Zenison Double Neck Electric Guitar White 12 String & 6 String
Product Details:
Custom painted neck and headstock matches body color. pearloid white pickguard. both necks have 22 frets. the 12 string has a fixed bridge and the 6 string has a vintage style tremolo. fast maple bolt-on necks. there is a volume control "in between" that controls the volume for the 12 string. the tone controls and 5 way selector switch operates for both sets of pickups. very cool and unique electric guitar!
Specifications:
| Package Dimensions | 46 x 21 x 4 inches |
| Is Discontinued By Manufacturer | No |
| Back Material | Maple Wood |
| Color Name | White |
| Fretboard Material | Rosewood |
| Guitar Pickup Configuration | triple |
| String Gauge | standard |
| String Material | steel |
| Top Material | Maple Wood |
| Neck Material Type | Maple |
| Number of Strings | 12 |
| Guitar Bridge System | Fixed |
| Fretboard Material Type | Rosewood |
| String Material Type | steel |
| Hand Orientation | Right |
Reviews:
It's very well crafted & plays well. Has a comfortable feel…..!!!cisum4cisum
Pickguard looks perloid in the picture and solid white is what I got. Upper neck has NO pickup selection. I know because I took it apart and all 3 upper pickups are wired directly to the output!! The knob in the middle, should be a blend pot that allows one to have one, both or adjust volume between the 2 necks. What the factory did was McGeyver a regular volume pot to try to do the same thing that kinda works, but not very well. 6 string neck on the on I recieved was very unstable! If you push one way or another, you can hear it go out of tune. 12 string neck is actually a little better, but the string break angle at the nut is ridiculous and pulls at the nut. I had to glue the nut in place (should have been done at the factory) to keep the strings in their proper place. Now I know at this price point for this type of guitar, you might have to put some work in, but some basic stuff should be ok from the jump and quality control sucks. I am a tinkerer and 40 year guitar player. So I know some things and know how to fix stuff. Good Luck if you get one of these that is playable out the box!!Rodd
3. Fender Deluxe Series Stratocaster Neck – Pau Ferro Fingerboard
Product Details:
Crafted at our ensenada, mexico manufacturing facility, this genuine fender stratocaster neck features a comfortable "c"-shaped profile and 12"-radius pau ferro fingerboard with 22 jumbo frets. the synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. this replacement neck is the perfect way to give your strat authentic fender feel. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures. your local fmic authorized service center can install genuine replacement necks.
Specifications:
| Compatibility | Deluxe Series Stratocaster Guitar |
| Neck Shape | Modern "C" |
| Tuner Mounting Config | Modern 2-Peg |
| Fingerboard Material | Pau Ferro |
| Neck Material | Maple |
| Nut Material | Synthetic Bone |
| Position Inlays | White Pearloid Dot |
| Neck Finish | Satin Urethane |
| Truss Rod Nut | 3/16" Hex Adjustment |
| Truss Rod | Standard |
| Fingerboard Radius | 12" (30.48cm) |
| Scale Length | 25.5" (64.77cm) |
| Nut Width | 1.65" (4.19cm) |
| Number of Frets | 22 |
| Fret Size | Jumbo |
| Headstock Thickness | 0.540" (13.72mm) |
| Peg Hole Diameter | 0.397" (10.08mm) |
| Dimensions | 3.2 x 7 x 30" (8.13 x 17.78 x 76.20cm) |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
4. Fender Roasted Maple Telecaster Neck
Product Details:
There’s no denying the allure of a roasted maple neck. resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument’s voice. this genuine fender telecaster neck is crafted at our ensenada, mexico manufacturing facility. featuring a comfortable "flat oval"-shaped profile and 12"-radius maple fingerboard with 22 jumbo frets, this neck was designed for pure speed. the synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. the perfect way to give your tele authentic fender feel, this replacement neck even sports our famous “spaghetti” logo on the headstock.
Specifications:
| Product Dimensions | 29.8 x 7.4 x 3.2 inches |
| Country of Origin | Mexico |
| Is Discontinued By Manufacturer | No |
| Back Material | Maple Wood |
| Color Name | Pau Ferro |
| Fretboard Material | Maple Wood |
| String Material | Nickel Steel |
| Top Material | Maple Wood |
| Neck Material Type | Maple |
| Number of Strings | 6 |
| Guitar Bridge System | Fixed |
| Fretboard Material Type | Maple Wood |
| String Material Type | Nickel Steel |
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
5. Fender Roasted Stratocaster Neck C Shape, Maple Fingerboard
Product Details:
There no denying the allure of a roasted maple neck. resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument voice. this genuine fender stratocaster neck is crafted at our ensenada, mexico manufacturing facility. featuring a comfortable modern c shaped profile and 9.5 radius maple fingerboard with 21 narrow tall frets, this neck was designed for pure playability. the synthetic bone nut is pre slotted with pilot grooves for accurate spacing when filing the final string slots. the perfect way to give your stratauthentic fender feel, this replacement neck even sports our famous spaghetti logo on the headstock. this replacement neck is for a fender or squierby fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
6. Fender Precision To Jazz Bass Conversion Neck, 20 Med Jumbo Frets, 12" Radius, Maple Natural
Product Details:
The fender precision to jazz bass conversion neck is a premium upgrade for any fender or squier bass product. constructed from maple, this neck will deliver a bright, lively and natural sound to any guitar – helping you find your own unique voice. it's affixed with a maple fingerboard and complete with a satin urethane finish which will have you gliding between the 20 medium jumbo frets with complete ease, for a supremely comfortable playability. this effect is compounded by the modern 'c' neck profile, which allows for minimal strain so you can play all night on stage, at home or in the studio. stamped with a fender logo on the gloss finished headstock, you'll be sure to have an authentic aesthetic for your favourite bass guitar. what's more, the bone nut is pre-slotted with 'pilot' string location grooves for intuitive spacing when playing on the final string slot.
Specifications:
Reviews:
I got this neck to replace the one I had on my Squier FSR Bullet Telecaster (in Metallic Purple with Maple Fretboard). This telecaster has a Maple neck with a normal C shape and felt really unrefined for a "Fender" neck. I decided to get this Fender Telecaster Standard Replacement Neck with a Modern C shape neck. This new actual Fender neck was a drastic change in quality and performance. Here's just a quick Pros and Con of this product. PROS: Real Fender Product – Because this is an official Fender product, the neck replacement on my Squier was seamless and very simple. Modern C – Makes a better feeling guitar when playing compared to the normal C shape neck. Satin Neck Finish on back – The neck is very smooth feeling when playing. The finish on the back of the neck doesn't get in the way of you playing fast. This helps if you have sweaty hands when playing. Gloss fretboard – This makes a difference because if doesn't feel like your fingers are sticking to the fretboard. Medium Jumbo Frets – Just feels nice when moving around the fretboard. Bending strings feel nicer than my old Squier frets. Pre Drilled Holes for Tuners – I already had Fender locking tuners. So it was a simple swap with no mods needed. CONS: Nut not slotted – I don't understand why the NUT isn't slotted at least for common string size. It is very slightly to get you started but you would need a file. I just used the low E strong and used it like a file but it didn't come out too well and I've had to buy a new nut that comes preslotted. No predrilled String tree hold – This really wasn't too much of a problem but it's scary if you get it wrong. Overall, I'm very happy with my purchase after two weeks of everyday playing with it. This was a much needed upgrade from my Squier telecaster neck I had.C. Barona
this is my 4th roasted neck and I can't recommend them enough. especially if you live on or near the water. I can pull out my strat or tele after not playing them for a few days and they are right in tune look at the quality that is put into them and you'd agree. when screwed to a sunburst or pastel colored body they just really enhance the look of your instrument. the cost of the roasted neck is something you gotta think about like do you really want to spend that kinda Ching on a neck? hell you can buy a standard neck for less or even buy an after market neck and play the same its all about the stability of the wood that closed the deal for me. dig down deep in yer pocket and pony up the Ching for one of these I'm pretty sure you be pleased you did. I have them mounted to Mexican fenders and American fenders all have mated up perfect and very little fret work was needed this is my experience with these necks and you will find the same. in short I dig mine and will in the future will only use these beautiesho-joe56
perfect fitment into a MIM fender body. finish was flawless and the dark maple is beautiful. mistake made on my part, not fender….. the roasted maple has so much less give than standard maple. I should have thought about that with all of the moisture being removed from the wood. I used fender press fit tuner bushings and installed them with a C-clamp as I always have. I heard the headstock crack as I was installing the D string bushing and my heart sank. Luckily, I was able to inject some wood glue and clamp it overnight to close it up, but I reamed out the G tuner bushing and learned my lesson. use care when installing the tuner bushings on anything roasted as the fibers in the wood simply will not compress the same way another neck would.Grey
7. Allparts Tro Replacement Neck For Telecaster (004)
Product Details:
This is the exact neck you'll receive! weight – 1lbs 0.7oz – unfinished replacement neck for telecaster with rosewood fretboard. – 21 vintage frets (.079" x .043") – maple neck, sanded, unfinished and ready to spray – rosewood fingerboard – 7.25" radius – nut width 1-5/8" – heel width 2-3/16" – tuning peg hole diameter .340" – truss rod adjustment at heel – neck thickness .85" at first fret, .94" at twelfth fret this neck is made of the highest quality wood in either the united states or japan. no two necks are exactly the same and may differ slightly from what is pictured. all necks may require fret leveling and polish, and may need to be fine tune to fit your instrument. this is normal and not a defect. all necks should be carefully inspected prior to installation and/or modification. all wood is unique with individual growth patters. this neck is licensed to allparts music corporation by fender musical instruments under a quality control trademark license.
Specifications:
| Finish | Rosewood |
| Year | 2021 |
| Made In | United States |
Reviews:
unfinished neck….took some work to dress the fret ends, but turned out very nice.steevesellaes
Im a player that has longer fingers and the fat neck cut down on player fatigue. Bought a rosewood a few weeks ago and came back to buy a maple neck with the nitro finish. They are beautiful necks and Im more than happy with my two Tele builds. Keep in mind that you will have to remove the nitro finish from the frets for it is standard practice to apply the finish to the entire neck. There are a few YouTube videos out there on how to properly do this. I personally taped up my fretboard and used a fine sandpaper to remove the finish from the frets. Also pay attention to the hole size in the headstock for your tuners. You may have to enlarge the holes provided and add those little pilot holes to stabilize your tuners. Just TAKE YOUR TIME with your build or replacement neck and you should be as satisfied as I am.smitus_s3lzwcnku
8. Allparts Tmnf-Fat Replacement Neck For Telecaster (130)
Product Details:
This is the exact neck you'll receive! weight – 1lbs 3.5oz 21 tall modern frets (.080 x .053") chunky, solid maple neck with vintage tinted nitrocellulose finish 9.5" radius nut width 1-5/8" heel width 2-3/16" tuning peg hole diameter .340" truss rod adjustment at heel all necks may require fret leveling and polish, and may need to be fine tune to fit your instrument. this is normal and not a defect. all necks should be carefully inspected prior to installation and/or modification. all wood is unique with individual growth patters.
Specifications:
| Finish | Nitro Over Poly |
Reviews:
unfinished neck….took some work to dress the fret ends, but turned out very nice.steevesellaes
Im a player that has longer fingers and the fat neck cut down on player fatigue. Bought a rosewood a few weeks ago and came back to buy a maple neck with the nitro finish. They are beautiful necks and Im more than happy with my two Tele builds. Keep in mind that you will have to remove the nitro finish from the frets for it is standard practice to apply the finish to the entire neck. There are a few YouTube videos out there on how to properly do this. I personally taped up my fretboard and used a fine sandpaper to remove the finish from the frets. Also pay attention to the hole size in the headstock for your tuners. You may have to enlarge the holes provided and add those little pilot holes to stabilize your tuners. Just TAKE YOUR TIME with your build or replacement neck and you should be as satisfied as I am.smitus_s3lzwcnku
9. 12 Strings Electric Guitar Neck Neck With 21 Frets Rosewood Fretboard All Come With The Nut And The Frets2466
Product Details:
10. 12 String Electric Guitar Neck 24.75 Inch Maple Rosewood Fingerboard
Product Details:
11. 12 String Electric Guitar Neck With Rosewood Fingerboard,can Be Customized
Product Details:
12. Fender Classic Player 60's Stratocaster Neck – Pau Ferro Fingerboard
Product Details:
Crafted at fender's ensenada, mexico manufacturing facility, this genuine vintage-style fender stratocaster neck features a comfortable "c"-shaped profile and 12"-radius pau ferro fingerboard with 21 medium jumbo frets. the synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots, and a gloss urethane finish offers an incredibly smooth feel. this replacement neck is the perfect way to give fender's strat an authentically '60s feel. this replacement neck is for a fender or squier by fender guitar. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel.
Specifications:
| Neck Material | Maple |
| Neck Shape | “C” Shape |
| Neck Finish | Gloss Urethane |
| Fingerboard Material | Pau Ferro |
| Fingerboard Radius | 12” (305 mm) |
| Scale Length | 25.5” (648 mm) |
| Number of Frets | 21 |
| Fret Size | Medium Jumbo |
| Position Inlays | White Dots |
| Nut Material | Synthetic Bone |
| Nut Width | 1.650” (42 mm) |
| Truss Rod | Vintage-Style Heel Adjust |
| Truss Rod Nut | Vintage-Style Slotted |
| Tuner Mounting | Vintage-style 2-screw |
| Peg Hole Diameter | .358” (9.09 mm) |
| Headstock Thickness | .540” (13.71 mm) |
| Neck Mounting | 4-Bolt |
Reviews:
WE HAVEN'T RECEIVED IT YET!!!!!!bigyesfan_yessongs
Se ajusta perfecto a mi squier vintage modified. Impecablemiferfre-4
Best MIM neck I have played. Truely complimented my 60s Strat build and plays like a dream.Jeff
13. Fender Road Worn '60s Stratocaster Neck Pau Ferro Fingerboard
Product Details:
Nitrocellulose lacquer is a vintage-accurate finish that wears gradually over time, creating a pleasantly worn-in appearance with use. our road worn nitro finish is hand-distressed to faithfully recreate the look and feel of a well-loved vintage instrument. this genuine fender stratocaster neck is crafted at our ensenada, mexico manufacturing facility. featuring a mid '60's "c" neck profile and 7.25"-radius pau ferro fingerboard with 21 vintage tall frets, for the comfortable playing feel of a vintage instrument. the synthetic bone nut is pre-slotted with "pilot" grooves for accurate spacing when filing the final string slots. the perfect way to give your strat authentic fender feel, this replacement neck even sports our famous "spaghetti" logo on the headstock. because fender genuine replacement necks have not been mounted to guitar bodies, nut slots must be cut by qualified personnel. other installation processes may be required, such as fret work, fitting the neck to the neck pocket, and other instrument setup procedures.
Specifications:
| Fingerboard Material | Pau Ferro |
| Fingerboard Radius | 7.25" (184.1 mm) |
| Neck Finish | Road Worn Nitrocellulose Lacquer |
| Neck Material | Maple |
| Neck Mounting | 4-Bolt |
| Neck Shape | Mid '60s "C" |
| Number of Frets | 21 |
| Nut Material | Synthetic Bone |
| Nut Width | 1.650" (42 mm) |
| Position Inlays | White Dot |
| Side Dots | White |
| String Nut | Synthetic Bone |
| Truss Rod | Vintage-Style Butt Adjust |
| Truss Rod Nut | Vintage-Style Slotted |
| Finish | Pau Ferro |
Reviews:
Sempre eccellenti nelle consegne! Prodotto ottimamente confezionato! Bravi!
Articolo ok, spedizione super puntuale, servizio clienti ottimo! Imballo perfetto!
14. Solo 12-String Tc Style 21 Fret Guitar Neck With Maple Fretboard
Product Details:
This solo guitar neck is intended as a replacement or diy project. neck specifications may have a +/- 1 or 2mm variance. if using this neck with a non solo tc body / solo hardware, slight modifications may be necessary in order to achieve a proper fit. this neck is unfinished and comes pre-sealed with a poly-resin sealer. features maple neck maple fretboard 12′′ radius 21 frets 2-way truss rod black dot inlays & side markers 25 1/2′′ scale length nut width: 1 5/8′′ thickness at nut: 13/16′′ thickness at 12th fret: 15/16′′ width at 12th fret: 2 1/16′′ item shown: solo 12-string tc style 21 fret guitar neck with maple fretboard model #: sl-tcnm21h-u12 upc: 842561002747
15. 12 String 24fret 24.75inch Electric Guitar Neck Maple+rosewood
Product Details:
Description suitable for diy electric guitars amateur electric guitar neck features: 1x 12string electric guitar neck . 48mm nut 59heel neck wood: maple wood fretboard wood: rose wood finish: unfinished inlay: dot inlaid side dots: left side dots scale length: 24.75inch. ≈628mm if you need other scale length please contact me. frets: 24 nickel/silver frets truss rod adjust: at headstock or bottom payment we appreciate quick payment and look forward to helping you with your musical instrument needs in the future. payment method: accept the following forms of payment via our secure system: paypal (visa, master, american express, discover, debit, and bank transfer) credit / west union credit / west union: please contact us if you like the in this way to pay. we recommend you by the paypal. checkout: after winning an item in an auction or a "buy it now" purchase, click on the checkout now button to immediately proceed with the checkout and payment process. you w
16. Fender Villager 12 String Neck 1965-68
Product Details:
Pulled from a villager 12 string with some issues. the neck did play great on the guitar and was not part of the problem. fender villager 12 string neck 1965-68 1 3/4" bone nut 7.25" radius rosewood fretboard original frets truss rod checks out a-okay neck thickness at 1st fret: 0.87" neck thickness at 12th fret: 0.9" mahar's vintage guitars is a brick-and-mortar and web-based retailer. we are happy to talk with you before you make a purchase. please reach out if you feel so inclined! we cross market our items here and on our own site, so items are subject to sale elsewhere at any time (however we will never cancel a sale if it happens here first). see our profile here, our google reviews as well as our 100% positive reverb feedback. also, reverb limits us to only 25 pictures of our items. there is a good chance we have more. contact us if you d like to see them.
17. One Good 24 Fret 25.5 Inch 12 String Unfinished Electric Guitar Neck 2# Maple Made Rose Wood
Product Details:
18. Solo 12-String St Style 21 Fret Guitar Neck
Product Details:
This solo guitar neck is intended as a replacement or diy project. neck specifications may have a +/- 1 or 2mm variance. if using this neck with a non solo body / solo hardware, slight modifications may be necessary in order to achieve a proper fit. this neck is unfinished and comes pre-sealed with a poly-resin sealer. features maple neck rosewood fretboard 12′′ radius 21 frets 2-way truss rod black dot inlays & side markers 25 1/2′′ scale length nut width: 2′′ thickness at nut: 1 11/64′′ thickness at 12th fret: 15/16′′ width at 12th fret: 2 11/64′′ item shown: solo 12-string st style 21 fret guitar neck model #: sl-stnrw21h-u12 upc: 842561002679
19. Boxwizard Electric Guitar Neck 22 Fret Maple Fretboard Guitar Neck For St Style Guitar Diy Parts Replacement
Product Details:
1. this guitar neck is compatible for fender st-style electric guitar neck replacement. 2. high-quality maple neck, delicate and unique. 3. fingerboard with 22 frets, smooth and high density. 4. adjustable truss rod has been installed at the headstock. 5. the hole for the tuning machine is 10mm in diameter. p descriptions: br / frets: 22 frets br / neck: canadian maple neck br / fingerboard: rosewood br / nut: 42mm nut br / back midline: rosewood br / color: matte yellow br / peg holes diameter: 10 mm / 0.4 inch br / neck length: 665mm / 26.18 in br / heel width: 56mm/2.2in br / heel depth: 20mm-26mm(with fingerboard) br / neck weight: 590g/20.8oz – package included: br / 1*guitar neck /p
Specifications:
| Hand Orientation | Right |
| Number of Strings | 6 |
20. Fistrock Diy Electric Guitar Kit Double Neck Guitar Kits Beginner Kits 12 String Right Handed With Mahogany Body Mahogany Neck Rosewood Fingerboard
Product Details:
Beginner kits by fistrock. details:diy guitar kit – build your own electric guitar pack by bogart all pickups, hardware and components included the diy double neck guitar kit provides you with all the necessary components for a beginner level build. ever wanted to build your own guitar? now you can with this practical diy guitar kit. with all of the hardware and components provided, along with an unfinished body made of high grade mahogany and a mahogany neck with a rosewood fretboard, you have everything you need to make a unique style guitar. the diy double neck guitar kit is a great value pack that offers you the opportunity to build your own guitar. without any of the hassle and expense of sourcing all of the parts, everything you need is in one box! providing you with all the necessary top quality parts and hardware, you are sure to get a great sounding guitar, as well as the fun and satisfaction of building your own instrument. difficulty level:…
Specifications:
| Product Dimensions | 12 x 8 x 2 inches |
| Is Discontinued By Manufacturer | No |
| Back Material | mahogany |
| Color Name | Natural |
| Fretboard Material | Rosewood |
| Guitar Pickup Configuration | H |
| Scale Length | 628mm/24.75'' |
| String Material | steel |
| Top Material | Mahogany Wood |
| Neck Material Type | Mahogany |
| Number of Strings | 12 |
| Guitar Bridge System | Tune-O-Matic |
| Proficiency Level | Beginner |
| Fretboard Material Type | Rosewood |
| String Material Type | steel |
| Hand Orientation | Right |
