Usa Custom Guitar Neck For Sale (2024 Update)

Fender licensed replacement neck for strat – #smosolid maple, sanded, unfinished and ready to spray! medium "c" profile22 jumbo modern frets (.114" x .055"), 12" radius1-5/8" nut width, 2-3/16" heel width.340" tuner hole diametertruss rod adjustment at heel.85" thick at 1st fret, .96" thick at 12th fret

Up for sale is a usacg electric guitar neck. some cosmetic wear. construction: quartersawn maple shaft , maple fretboard heel width: 2.19” nut: 1.63” scale: 25.5” frets: large mild wear radius: 9.5” finish: gloss profile: deep d thanks for looking and please ask any questions. ships within 24 hours

Custom electric guitar neck, red bat fingerboard, nail head guitar, please contact before ordering

Maple on cherry, 25.5" 22 fret. nice birdseye on the fretboard, never installed.

The original aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. it is designed to be an aftermarket fit with most stratocasters, telecasters, and jazzmasters. it comes with everything you need to replace your current neck with one from rgi. this neck is built and ready to ship! neck specs: material: 6061 solid billet aluminum scale: 25.5” nut width: 1 11/16” frets: 22 stainless steel medium/medium fretboard radius: 12” tuners: 3+3 sperzel locking nut: 6061 aluminum (cut for heavy gauge strings)(0.013", 0.020", 0.024", 0.035", 0.046", and 0.056") heel pocket: fender strat style (5/8” deep, 2.18” heel width, 3” total length, 5” radius heel curve) thickness: .700” at nut, .725” at 7th fret, .740” at 12th fret .760” at 15th fret neck shape: very flat u shape, maximum thinness without structural loss, no tapered heel includes: 4 stainless steel 1 1/2 “ 10-24 mounting bolts, backplate, buffing compound, and 2 microfibre cloths frequently asked questions why aluminum? when looking for a neck, there are a lot of different variables to look at. structurally, a solid billet of aluminum will offer the most rigidity of the option possible. there is no truss rod or other materials to stress and strain during temperature or moisture changes. additionally, that additional strength can help with the wear and tear of tour, stages, and other bumps and bruises any guitar will have to sustain during it’s lifespan. sonically, the density of aluminum may give you an advantage with more sustain and over tones, since the neck won’t sympathetically vibrate with the strings. this is, as with anything, certainly up for debate as to what your ears hear and your hands feel. it’s worth noting that it will feel colder to the touch since aluminum is a better thermal conductor than wood, and it does noticeably weigh more. will this fit my guitar? yes: for the most part, if you’re running a telecaster, stratocaster, or jazzmaster, you should be able to bolt this neck directly onto the body. maybe not: if you are running a t-60, jaguar, mustang, or 72’ telecaster deluxe; you cannot run this neck without modifications due to scale and bolt pattern restrictions. if you are confused and unsure, contact a local luthier to help you with your project. it’s a worthy profession to support and you’ll learn new things. if you are considering a guitar not mentioned here, then i’m not sure. can i do the change over myself? yes: most seasoned guitarist can probably do this, yes. but read this: i have pre-drilled the necks and they are tapped with machine bolts. you may have to adjust neck angle, saddle heights, and intonate your guitar afterwords. if your action is still too loose for your preference, a luthier can help you with adjusting the nut string depths to a tighter playing style. the depths are set fairly high to allow for adjustment after installation. what is the 700 series? the 700 series is the first set of necks that i designed, named after the thickness at the nut for the design. i will be continuing this convention for each style going forward, so anything with this thickness will be in the 700 series, and further designs may be in a new series for their specific design requirements. can i get something custom? short answer, yes: i can make a neck for any project. in the recent past i’ve also made custom guitars, hand-wired tube amps, cabs, a few different pedals and even a pickup. custom, multiple runs: if you are a guitar builder and are interested in ordering a batch of necks custom fit and finished for your company or brand, please reach out. i can offer discounts for custom work at scale. fully custom, one-off builds: if you have your sights set on something fully custom, i’d be glad to chat with you about your needs. this process is expensive. the new neck would need to be prototyped, engineered, manufactured, and then finished, all with processes and measurements outside of my normal set-up. you’d be looking at at least a handful of months and a starting price around $5,000. can i get mine cheaper? faster? no affirm asked me to add this, if you use affirm please read this or something like that if you finance with affirm and if one or more items in your order has an extended ship date, your loan payment(s), including interest, may be due before the merchant ships all of the items. please note that you may not receive a rebate of any interest that may have already accrued on an amount that later gets refunded.

Diy (new) custom electric guitar neck tiger / flame maple neck beautiful inlays in stock discount

Red headstock custom electric guitar neck, rosewood fingerboard1.machine head r: 11mm2.fingerboard length :49.5cm3.nut size :43.2mm last frets size :56.6mm4.neck joint size neck thickness and neck with fingerboard thickness) :19x25mm5.thickness on 1st frets :20.4mm thickness on 12st frets: 21.5mm

Up for grabs we have here for sale is what i can gather based on the overall craftsmanship is a 90s kramer electric guitar that has been reworked and rebranded to accommodate the awesome bengal stripe paint job on the headstock and rebranded to say one and only custom electric guitars. i received this neck in a trade without the body so i can t say for sure where it came off of but what i can tell you is that it s in great shape and rocking 22 frets! this comes loaded with gotoh tuners that have excellent gear ratio and provides accurate tuning stability. i checked the truss rod and it s in 100% working order with no issues at all whatsoever. frets are in perfect health with no signs of use. this would be totally ideal for your next george lynch project or really anything for that matter. sold as pictured if you have any questions feel free to contact me

Reduce costs with factory direct sourcing. low moq, oem/odm available. source now! traditional sourcing brought online. find quality products & contact verified suppliers!;guitar

This solo guitar neck is intended as a replacement or diy project. neck specifications may have a +/- 1 or 2mm variance. if using this neck with a non solo body / solo hardware, slight modifications may be necessary in order to achieve a proper fit. this neck is a custom 24 fret jm style neck, and is a replacement neck for jek-10. this neck is unfinished and comes pre-sealed with a poly-resin sealer. features maple neck rosewood fretboard 12′′ radius 24 frets 2-way truss rod mop tree of life inlays 25 1/2′′ scale length item shown: solo custom jm style 24 fret guitar neck with rosewood fretboard & vine inlay model #: sl-jmnrw24h-vi upc: 787392886848

1. this guitar neck is compatible for fender st-style electric guitar neck replacement. 2. high-quality maple neck, delicate and unique. 3. fingerboard with 22 frets, smooth and high density. 4. adjustable truss rod has been installed at the headstock. 5. the hole for the tuning machine is 10mm in diameter. p descriptions: br / frets: 22 frets br / neck: canadian maple neck br / fingerboard: rosewood br / nut: 42mm nut br / back midline: rosewood br / color: matte yellow br / peg holes diameter: 10 mm / 0.4 inch br / neck length: 665mm / 26.18 in br / heel width: 56mm/2.2in br / heel depth: 20mm-26mm(with fingerboard) br / neck weight: 590g/20.8oz – package included: br / 1*guitar neck /p

The original bolt on aluminum neck design from robot graves industries. the neck is milled from a solid piece of aluminum for incredible durability, rigidity, and sustain. it is designed to be an aftermarket fit with most stratocasters, telecasters, and jazzmasters. it comes with everything you need to replace your current neck with one from rgi. necks are built to order with your specifications, so expect up to a two month wait before receiving your neck. neck specs: material: 6061 solid billet aluminum scale: 25.5” nut width: 1 11/16” weight: solid billet: 3 lbs 3 oz, hollow richlite: 2 lbs 2 oz frets: 22 stainless steel medium/medium fretboard radius: 12” tuners: 3+3 sperzel locking nut: 6061 aluminum (cut for heavy gauge strings)(0.013", 0.020", 0.024", 0.035", 0.046", and 0.056") or cut to your specific gauges if specified heel pocket: fender strat style (5/8” deep, 2.18” heel width, 3” total length, 5” radius heel curve) thickness: .700” at nut, .725” at 7th fret, .740” at 12th fret .760” at 15th fret neck shape: very flat u shape, maximum thinness without structural loss, no tapered heel includes: 4 stainless steel 1 1/2 “ 10-24 mounting bolts, backplate, buffing compound, and 2 microfibre cloths frequently asked questions why aluminum? when looking for a neck, there are a lot of different variables to look at. structurally, a solid billet of aluminum will offer the most rigidity of the option possible. there is no truss rod or other materials to stress and strain during temperature or moisture changes. additionally, that additional strength can help with the wear and tear of tour, stages, and other bumps and bruises any guitar will have to sustain during it’s lifespan. sonically, the density of aluminum may give you an advantage with more sustain and over tones, since the neck won’t sympathetically vibrate with the strings. this is, as with anything, certainly up for debate as to what your ears hear and your hands feel. it’s worth noting that it will feel colder to the touch since aluminum is a better thermal conductor than wood, and it does noticeably weigh more. will this fit my guitar? yes: for the most part, if you’re running a telecaster, stratocaster, or jazzmaster, you should be able to bolt this neck directly onto the body. maybe not: if you are running a t-60, jaguar, mustang, or 72’ telecaster deluxe; you cannot run this neck without modifications due to scale and bolt pattern restrictions. if you are confused and unsure, contact a local luthier to help you with your project. it’s a worthy profession to support and you’ll learn new things. if you are considering a guitar not mentioned here, then i’m not sure. can i do the change over myself? yes: most seasoned guitarist can probably do this, yes. but read this: i have pre-drilled the necks and they are tapped with machine bolts. you may have to adjust neck angle, saddle heights, and intonate your guitar afterwords. if your action is still too loose for your preference, a luthier can help you with adjusting the nut string depths to a tighter playing style. the depths are set fairly high to allow for adjustment after installation. what is the 700 series? the 700 series is the first set of necks that i designed, named after the thickness at the nut for the design. i will be continuing this convention for each style going forward, so anything with this thickness will be in the 700 series, and further designs may be in a new series for their specific design requirements. can i get something custom? short answer, yes: i can make a neck for any project. in the recent past i’ve also made custom guitars, hand-wired tube amps, cabs, a few different pedals and even a pickup. custom, multiple runs: if you are a guitar builder and are interested in ordering a batch of necks custom fit and finished for your company or brand, please reach out. i can offer discounts for custom work at scale. fully custom, one-off builds: if you have your sights set on something fully custom, i’d be glad to chat with you about your needs. this process is expensive. the new neck would need to be prototyped, engineered, manufactured, and then finished, all with processes and measurements outside of my normal set-up. you’d be looking at at least a handful of months and a starting price around $5,000. can i get mine cheaper? faster? no affirm asked me to add this, if you use affirm please read this or something like that if you finance with affirm and if one or more items in your order has an extended ship date, your loan payment(s), including interest, may be due before the

Reduce costs with factory direct sourcing. low moq, oem/odm available. source now! traditional sourcing brought online. find quality products & contact verified suppliers!

22 frets custom electric guitar maple wood neckmaterial: maple with mapledetails: 22 frets ,dot side mark ,trussrod from headstock ,right hand,machine head 6 inline .no nut , dot inlay mop1.machine head r: 9.8mm2.fingerboard length :476mm3.nut size :42.3mm last frets size :57mm4.neck joint size hight xwidth xthickness) :101×57.3x25mm5.thickness on 1st frets :20.7mm thickness on 12st frets: 22.5mm6.total length of the neck :666mm7.scales length is : 648mm

Attila custom guitars. professionally hand crafted in cleveland ohio. unsurpassed quality and attention to detail. this listing is for a neck built to your specifications. pictures are a representation of what you will receive. the last two pics show the precision of our work. fingerboard radius so precise not a spec of light shows underneath the straight edge. frets perfectly leveled, crowned, and polished reading at 0.00 on the relief gauge. important specs and dimensions: neck wood — quartersawn hard maple fingerboard — indian rosewood / hard maple binding neck contour shape — modern c neck thickness — specify desired thickness at 1st and 12th fret truss rod — 2 way / adjust at nut. allen wrench included nut width — 1 11/16" heel width — 2 3/16" fingerboard radius — choice

Features: 1. designed for lp electric guitar neck replacement with a natural finish and white trapezoid inlay. 2. well-constructed guitar neck nut and horizontal fret level bring you comfortable playing experience and prevent the strings from buzzing. 3. set in style, white fretboard binding. 24.75 inch 22 fret. 2.7mm fret wire, heel width about 3.8cm, heel length: 10.7cm, depth: 2.5cm. 4. two-way adjustable truss rod helps stabilize the performance of your guitar neck that is susceptible to humidity and tension from guitar strings. 5.truss rod at headstock, nice cut headstock , normal nut, 42mm nut width. package includes: 1 x neck specifications: material: wood color: as the picture shows weight: approx.680g neck body: mahogany fingerboard: rosewood position marker: trapezoid note: please allow 0-3mm error due to manual measurement. pls make sure you do not mind before you bid. due to the difference between different monitors, the picture may not reflect the actual color of the item. thank you! gender: male.

This solo guitar neck is intended as a replacement or diy project. neck specifications may have a +/- 1 or 2mm variance. if using this neck with a non solo body / solo hardware, slight modifications may be necessary in order to achieve a proper fit. this neck is a custom 21 fret st style neck, and it is not made as a replacement for the standard st style guitars. this neck is unfinished and comes pre-sealed with a poly-resin sealer. features maple neck rosewood fretboard 12′′ radius 21 frets 2-way truss rod mop tree of life inlays 25 1/2′′ scale length item shown: solo custom st style 21 fret guitar neck with rosewood fretboard & vine inlay model #: sl-stnrw21h-vi upc: 842561003096

Custom order st guitar neck 21 frets canadian maple rosewood trussrod inlay back no frets diy

Reduce costs with factory direct sourcing. low moq, oem/odm available. source now! traditional sourcing brought online. find quality products & contact verified suppliers!

Construct your dream guitar, or upgrade your existing instrument with this stunning rosewood neck from falkon with beautiful fret markers inlaid, and truss rod inlay.the high levels of workmanship and quality control, and the option to match up your chosen finish, body style, neck & fretboard. this neck is made of the highest quality wood, which means better sound transference between the neck and body to a meatier, juicier tone overall.this neck is the same as you would find on all guitars and perfect whether you're upgrading or repairing, your best instrument awaits with a great quality replacement neck. adjustable the truss rod has been installed.we send it by dhl express from sweden and it takes about 3-5 working days onlyspecifications: vintage nitro finish inlay: fret block inlaid machine head holes: 10mm radius: 9.5 – profile: modern c heel depth: 25.5mm frets: 21 nickel silver frets nut width: 42mm – heel width: 55.5mm come with bone nuts and 2-way truss rods installed. falkon guitars is in the business of manufacturing and supplying replacement guitar parts based in swedenthis is falkon guitars product and all our necks are made to a standard dimension. high quality, but far more competitive pricing!